Commit Graph

13 Commits

Author SHA1 Message Date
Eric Biggers e3b1078bed fscrypt: add support for IV_INO_LBLK_32 policies
The eMMC inline crypto standard will only specify 32 DUN bits (a.k.a. IV
bits), unlike UFS's 64.  IV_INO_LBLK_64 is therefore not applicable, but
an encryption format which uses one key per policy and permits the
moving of encrypted file contents (as f2fs's garbage collector requires)
is still desirable.

To support such hardware, add a new encryption format IV_INO_LBLK_32
that makes the best use of the 32 bits: the IV is set to
'SipHash-2-4(inode_number) + file_logical_block_number mod 2^32', where
the SipHash key is derived from the fscrypt master key.  We hash only
the inode number and not also the block number, because we need to
maintain contiguity of DUNs to merge bios.

Unlike with IV_INO_LBLK_64, with this format IV reuse is possible; this
is unavoidable given the size of the DUN.  This means this format should
only be used where the requirements of the first paragraph apply.
However, the hash spreads out the IVs in the whole usable range, and the
use of a keyed hash makes it difficult for an attacker to determine
which files use which IVs.

Besides the above differences, this flag works like IV_INO_LBLK_64 in
that on ext4 it is only allowed if the stable_inodes feature has been
enabled to prevent inode numbers and the filesystem UUID from changing.

Link: https://lore.kernel.org/r/20200515204141.251098-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Paul Crowley <paulcrowley@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-19 09:34:18 -07:00
Eric Biggers cdeb21da17 fscrypt: add fscrypt_add_test_dummy_key()
Currently, the test_dummy_encryption mount option (which is used for
encryption I/O testing with xfstests) uses v1 encryption policies, and
it relies on userspace inserting a test key into the session keyring.

We need test_dummy_encryption to support v2 encryption policies too.
Requiring userspace to add the test key doesn't work well with v2
policies, since v2 policies only support the filesystem keyring (not the
session keyring), and keys in the filesystem keyring are lost when the
filesystem is unmounted.  Hooking all test code that unmounts and
re-mounts the filesystem would be difficult.

Instead, let's make the filesystem automatically add the test key to its
keyring when test_dummy_encryption is enabled.

That puts the responsibility for choosing the test key on the kernel.
We could just hard-code a key.  But out of paranoia, let's first try
using a per-boot random key, to prevent this code from being misused.
A per-boot key will work as long as no one expects dummy-encrypted files
to remain accessible after a reboot.  (gce-xfstests doesn't.)

Therefore, this patch adds a function fscrypt_add_test_dummy_key() which
implements the above.  The next patch will use it.

Link: https://lore.kernel.org/r/20200512233251.118314-3-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-15 13:51:45 -07:00
Eric Biggers 13a10da946 fscrypt: don't print name of busy file when removing key
When an encryption key can't be fully removed due to file(s) protected
by it still being in-use, we shouldn't really print the path to one of
these files to the kernel log, since parts of this path are likely to be
encrypted on-disk, and (depending on how the system is set up) the
confidentiality of this path might be lost by printing it to the log.

This is a trade-off: a single file path often doesn't matter at all,
especially if it's a directory; the kernel log might still be protected
in some way; and I had originally hoped that any "inode(s) still busy"
bugs (which are security weaknesses in their own right) would be quickly
fixed and that to do so it would be super helpful to always know the
file path and not have to run 'find dir -inum $inum' after the fact.

But in practice, these bugs can be hard to fix (e.g. due to asynchronous
process killing that is difficult to eliminate, for performance
reasons), and also not tied to specific files, so knowing a file path
doesn't necessarily help.

So to be safe, for now let's just show the inode number, not the path.
If someone really wants to know a path they can use 'find -inum'.

Fixes: b1c0ec3599 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://lore.kernel.org/r/20200120060732.390362-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-22 14:45:08 -08:00
Eric Biggers 93edd392ca fscrypt: support passing a keyring key to FS_IOC_ADD_ENCRYPTION_KEY
Extend the FS_IOC_ADD_ENCRYPTION_KEY ioctl to allow the raw key to be
specified by a Linux keyring key, rather than specified directly.

This is useful because fscrypt keys belong to a particular filesystem
instance, so they are destroyed when that filesystem is unmounted.
Usually this is desired.  But in some cases, userspace may need to
unmount and re-mount the filesystem while keeping the keys, e.g. during
a system update.  This requires keeping the keys somewhere else too.

The keys could be kept in memory in a userspace daemon.  But depending
on the security architecture and assumptions, it can be preferable to
keep them only in kernel memory, where they are unreadable by userspace.

We also can't solve this by going back to the original fscrypt API
(where for each file, the master key was looked up in the process's
keyring hierarchy) because that caused lots of problems of its own.

Therefore, add the ability for FS_IOC_ADD_ENCRYPTION_KEY to accept a
Linux keyring key.  This solves the problem by allowing userspace to (if
needed) save the keys securely in a Linux keyring for re-provisioning,
while still using the new fscrypt key management ioctls.

This is analogous to how dm-crypt accepts a Linux keyring key, but the
key is then stored internally in the dm-crypt data structures rather
than being looked up again each time the dm-crypt device is accessed.

Use a custom key type "fscrypt-provisioning" rather than one of the
existing key types such as "logon".  This is strongly desired because it
enforces that these keys are only usable for a particular purpose: for
fscrypt as input to a particular KDF.  Otherwise, the keys could also be
passed to any kernel API that accepts a "logon" key with any service
prefix, e.g. dm-crypt, UBIFS, or (recently proposed) AF_ALG.  This would
risk leaking information about the raw key despite it ostensibly being
unreadable.  Of course, this mistake has already been made for multiple
kernel APIs; but since this is a new API, let's do it right.

This patch has been tested using an xfstest which I wrote to test it.

Link: https://lore.kernel.org/r/20191119222447.226853-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-12-31 10:33:49 -06:00
Pankaj Bharadiya c593642c8b treewide: Use sizeof_field() macro
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().

This patch is generated using following script:

EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"

git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do

	if [[ "$file" =~ $EXCLUDE_FILES ]]; then
		continue
	fi
	sed -i  -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-09 10:36:44 -08:00
Eric Biggers b103fb7653 fscrypt: add support for IV_INO_LBLK_64 policies
Inline encryption hardware compliant with the UFS v2.1 standard or with
the upcoming version of the eMMC standard has the following properties:

(1) Per I/O request, the encryption key is specified by a previously
    loaded keyslot.  There might be only a small number of keyslots.

(2) Per I/O request, the starting IV is specified by a 64-bit "data unit
    number" (DUN).  IV bits 64-127 are assumed to be 0.  The hardware
    automatically increments the DUN for each "data unit" of
    configurable size in the request, e.g. for each filesystem block.

Property (1) makes it inefficient to use the traditional fscrypt
per-file keys.  Property (2) precludes the use of the existing
DIRECT_KEY fscrypt policy flag, which needs at least 192 IV bits.

Therefore, add a new fscrypt policy flag IV_INO_LBLK_64 which causes the
encryption to modified as follows:

- The encryption keys are derived from the master key, encryption mode
  number, and filesystem UUID.

- The IVs are chosen as (inode_number << 32) | file_logical_block_num.
  For filenames encryption, file_logical_block_num is 0.

Since the file nonces aren't used in the key derivation, many files may
share the same encryption key.  This is much more efficient on the
target hardware.  Including the inode number in the IVs and mixing the
filesystem UUID into the keys ensures that data in different files is
nevertheless still encrypted differently.

Additionally, limiting the inode and block numbers to 32 bits and
placing the block number in the low bits maintains compatibility with
the 64-bit DUN convention (property (2) above).

Since this scheme assumes that inode numbers are stable (which may
preclude filesystem shrinking) and that inode and file logical block
numbers are at most 32-bit, IV_INO_LBLK_64 will only be allowed on
filesystems that meet these constraints.  These are acceptable
limitations for the cases where this format would actually be used.

Note that IV_INO_LBLK_64 is an on-disk format, not an implementation.
This patch just adds support for it using the existing filesystem layer
encryption.  A later patch will add support for inline encryption.

Reviewed-by: Paul Crowley <paulcrowley@google.com>
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-11-06 12:34:36 -08:00
Eric Biggers 5ab7189a31 fscrypt: require that key be added when setting a v2 encryption policy
By looking up the master keys in a filesystem-level keyring rather than
in the calling processes' key hierarchy, it becomes possible for a user
to set an encryption policy which refers to some key they don't actually
know, then encrypt their files using that key.  Cryptographically this
isn't much of a problem, but the semantics of this would be a bit weird.
Thus, enforce that a v2 encryption policy can only be set if the user
has previously added the key, or has capable(CAP_FOWNER).

We tolerate that this problem will continue to exist for v1 encryption
policies, however; there is no way around that.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Eric Biggers 78a1b96bcf fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl
Add a root-only variant of the FS_IOC_REMOVE_ENCRYPTION_KEY ioctl which
removes all users' claims of the key, not just the current user's claim.
I.e., it always removes the key itself, no matter how many users have
added it.

This is useful for forcing a directory to be locked, without having to
figure out which user ID(s) the key was added under.  This is planned to
be used by a command like 'sudo fscrypt lock DIR --all-users' in the
fscrypt userspace tool (http://github.com/google/fscrypt).

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Eric Biggers 23c688b540 fscrypt: allow unprivileged users to add/remove keys for v2 policies
Allow the FS_IOC_ADD_ENCRYPTION_KEY and FS_IOC_REMOVE_ENCRYPTION_KEY
ioctls to be used by non-root users to add and remove encryption keys
from the filesystem-level crypto keyrings, subject to limitations.

Motivation: while privileged fscrypt key management is sufficient for
some users (e.g. Android and Chromium OS, where a privileged process
manages all keys), the old API by design also allows non-root users to
set up and use encrypted directories, and we don't want to regress on
that.  Especially, we don't want to force users to continue using the
old API, running into the visibility mismatch between files and keyrings
and being unable to "lock" encrypted directories.

Intuitively, the ioctls have to be privileged since they manipulate
filesystem-level state.  However, it's actually safe to make them
unprivileged if we very carefully enforce some specific limitations.

First, each key must be identified by a cryptographic hash so that a
user can't add the wrong key for another user's files.  For v2
encryption policies, we use the key_identifier for this.  v1 policies
don't have this, so managing keys for them remains privileged.

Second, each key a user adds is charged to their quota for the keyrings
service.  Thus, a user can't exhaust memory by adding a huge number of
keys.  By default each non-root user is allowed up to 200 keys; this can
be changed using the existing sysctl 'kernel.keys.maxkeys'.

Third, if multiple users add the same key, we keep track of those users
of the key (of which there remains a single copy), and won't really
remove the key, i.e. "lock" the encrypted files, until all those users
have removed it.  This prevents denial of service attacks that would be
possible under simpler schemes, such allowing the first user who added a
key to remove it -- since that could be a malicious user who has
compromised the key.  Of course, encryption keys should be kept secret,
but the idea is that using encryption should never be *less* secure than
not using encryption, even if your key was compromised.

We tolerate that a user will be unable to really remove a key, i.e.
unable to "lock" their encrypted files, if another user has added the
same key.  But in a sense, this is actually a good thing because it will
avoid providing a false notion of security where a key appears to have
been removed when actually it's still in memory, available to any
attacker who compromises the operating system kernel.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Eric Biggers 5dae460c22 fscrypt: v2 encryption policy support
Add a new fscrypt policy version, "v2".  It has the following changes
from the original policy version, which we call "v1" (*):

- Master keys (the user-provided encryption keys) are only ever used as
  input to HKDF-SHA512.  This is more flexible and less error-prone, and
  it avoids the quirks and limitations of the AES-128-ECB based KDF.
  Three classes of cryptographically isolated subkeys are defined:

    - Per-file keys, like used in v1 policies except for the new KDF.

    - Per-mode keys.  These implement the semantics of the DIRECT_KEY
      flag, which for v1 policies made the master key be used directly.
      These are also planned to be used for inline encryption when
      support for it is added.

    - Key identifiers (see below).

- Each master key is identified by a 16-byte master_key_identifier,
  which is derived from the key itself using HKDF-SHA512.  This prevents
  users from associating the wrong key with an encrypted file or
  directory.  This was easily possible with v1 policies, which
  identified the key by an arbitrary 8-byte master_key_descriptor.

- The key must be provided in the filesystem-level keyring, not in a
  process-subscribed keyring.

The following UAPI additions are made:

- The existing ioctl FS_IOC_SET_ENCRYPTION_POLICY can now be passed a
  fscrypt_policy_v2 to set a v2 encryption policy.  It's disambiguated
  from fscrypt_policy/fscrypt_policy_v1 by the version code prefix.

- A new ioctl FS_IOC_GET_ENCRYPTION_POLICY_EX is added.  It allows
  getting the v1 or v2 encryption policy of an encrypted file or
  directory.  The existing FS_IOC_GET_ENCRYPTION_POLICY ioctl could not
  be used because it did not have a way for userspace to indicate which
  policy structure is expected.  The new ioctl includes a size field, so
  it is extensible to future fscrypt policy versions.

- The ioctls FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY,
  and FS_IOC_GET_ENCRYPTION_KEY_STATUS now support managing keys for v2
  encryption policies.  Such keys are kept logically separate from keys
  for v1 encryption policies, and are identified by 'identifier' rather
  than by 'descriptor'.  The 'identifier' need not be provided when
  adding a key, since the kernel will calculate it anyway.

This patch temporarily keeps adding/removing v2 policy keys behind the
same permission check done for adding/removing v1 policy keys:
capable(CAP_SYS_ADMIN).  However, the next patch will carefully take
advantage of the cryptographically secure master_key_identifier to allow
non-root users to add/remove v2 policy keys, thus providing a full
replacement for v1 policies.

(*) Actually, in the API fscrypt_policy::version is 0 while on-disk
    fscrypt_context::format is 1.  But I believe it makes the most sense
    to advance both to '2' to have them be in sync, and to consider the
    numbering to start at 1 except for the API quirk.

Reviewed-by: Paul Crowley <paulcrowley@google.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Eric Biggers 5a7e29924d fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl
Add a new fscrypt ioctl, FS_IOC_GET_ENCRYPTION_KEY_STATUS.  Given a key
specified by 'struct fscrypt_key_specifier' (the same way a key is
specified for the other fscrypt key management ioctls), it returns
status information in a 'struct fscrypt_get_key_status_arg'.

The main motivation for this is that applications need to be able to
check whether an encrypted directory is "unlocked" or not, so that they
can add the key if it is not, and avoid adding the key (which may
involve prompting the user for a passphrase) if it already is.

It's possible to use some workarounds such as checking whether opening a
regular file fails with ENOKEY, or checking whether the filenames "look
like gibberish" or not.  However, no workaround is usable in all cases.

Like the other key management ioctls, the keyrings syscalls may seem at
first to be a good fit for this.  Unfortunately, they are not.  Even if
we exposed the keyring ID of the ->s_master_keys keyring and gave
everyone Search permission on it (note: currently the keyrings
permission system would also allow everyone to "invalidate" the keyring
too), the fscrypt keys have an additional state that doesn't map cleanly
to the keyrings API: the secret can be removed, but we can be still
tracking the files that were using the key, and the removal can be
re-attempted or the secret added again.

After later patches, some applications will also need a way to determine
whether a key was added by the current user vs. by some other user.
Reserved fields are included in fscrypt_get_key_status_arg for this and
other future extensions.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:50 -07:00
Eric Biggers b1c0ec3599 fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_REMOVE_ENCRYPTION_KEY.  This ioctl
removes an encryption key that was added by FS_IOC_ADD_ENCRYPTION_KEY.
It wipes the secret key itself, then "locks" the encrypted files and
directories that had been unlocked using that key -- implemented by
evicting the relevant dentries and inodes from the VFS caches.

The problem this solves is that many fscrypt users want the ability to
remove encryption keys, causing the corresponding encrypted directories
to appear "locked" (presented in ciphertext form) again.  Moreover,
users want removing an encryption key to *really* remove it, in the
sense that the removed keys cannot be recovered even if kernel memory is
compromised, e.g. by the exploit of a kernel security vulnerability or
by a physical attack.  This is desirable after a user logs out of the
system, for example.  In many cases users even already assume this to be
the case and are surprised to hear when it's not.

It is not sufficient to simply unlink the master key from the keyring
(or to revoke or invalidate it), since the actual encryption transform
objects are still pinned in memory by their inodes.  Therefore, to
really remove a key we must also evict the relevant inodes.

Currently one workaround is to run 'sync && echo 2 >
/proc/sys/vm/drop_caches'.  But, that evicts all unused inodes in the
system rather than just the inodes associated with the key being
removed, causing severe performance problems.  Moreover, it requires
root privileges, so regular users can't "lock" their encrypted files.

Another workaround, used in Chromium OS kernels, is to add a new
VFS-level ioctl FS_IOC_DROP_CACHE which is a more restricted version of
drop_caches that operates on a single super_block.  It does:

        shrink_dcache_sb(sb);
        invalidate_inodes(sb, false);

But it's still a hack.  Yet, the major users of filesystem encryption
want this feature badly enough that they are actually using these hacks.

To properly solve the problem, start maintaining a list of the inodes
which have been "unlocked" using each master key.  Originally this
wasn't possible because the kernel didn't keep track of in-use master
keys at all.  But, with the ->s_master_keys keyring it is now possible.

Then, add an ioctl FS_IOC_REMOVE_ENCRYPTION_KEY.  It finds the specified
master key in ->s_master_keys, then wipes the secret key itself, which
prevents any additional inodes from being unlocked with the key.  Then,
it syncs the filesystem and evicts the inodes in the key's list.  The
normal inode eviction code will free and wipe the per-file keys (in
->i_crypt_info).  Note that freeing ->i_crypt_info without evicting the
inodes was also considered, but would have been racy.

Some inodes may still be in use when a master key is removed, and we
can't simply revoke random file descriptors, mmap's, etc.  Thus, the
ioctl simply skips in-use inodes, and returns -EBUSY to indicate that
some inodes weren't evicted.  The master key *secret* is still removed,
but the fscrypt_master_key struct remains to keep track of the remaining
inodes.  Userspace can then retry the ioctl to evict the remaining
inodes.  Alternatively, if userspace adds the key again, the refreshed
secret will be associated with the existing list of inodes so they
remain correctly tracked for future key removals.

The ioctl doesn't wipe pagecache pages.  Thus, we tolerate that after a
kernel compromise some portions of plaintext file contents may still be
recoverable from memory.  This can be solved by enabling page poisoning
system-wide, which security conscious users may choose to do.  But it's
very difficult to solve otherwise, e.g. note that plaintext file
contents may have been read in other places than pagecache pages.

Like FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY is
initially restricted to privileged users only.  This is sufficient for
some use cases, but not all.  A later patch will relax this restriction,
but it will require introducing key hashes, among other changes.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:18:49 -07:00
Eric Biggers 22d94f493b fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY.  This ioctl adds an
encryption key to the filesystem's fscrypt keyring ->s_master_keys,
making any files encrypted with that key appear "unlocked".

Why we need this
~~~~~~~~~~~~~~~~

The main problem is that the "locked/unlocked" (ciphertext/plaintext)
status of encrypted files is global, but the fscrypt keys are not.
fscrypt only looks for keys in the keyring(s) the process accessing the
filesystem is subscribed to: the thread keyring, process keyring, and
session keyring, where the session keyring may contain the user keyring.

Therefore, userspace has to put fscrypt keys in the keyrings for
individual users or sessions.  But this means that when a process with a
different keyring tries to access encrypted files, whether they appear
"unlocked" or not is nondeterministic.  This is because it depends on
whether the files are currently present in the inode cache.

Fixing this by consistently providing each process its own view of the
filesystem depending on whether it has the key or not isn't feasible due
to how the VFS caches work.  Furthermore, while sometimes users expect
this behavior, it is misguided for two reasons.  First, it would be an
OS-level access control mechanism largely redundant with existing access
control mechanisms such as UNIX file permissions, ACLs, LSMs, etc.
Encryption is actually for protecting the data at rest.

Second, almost all users of fscrypt actually do need the keys to be
global.  The largest users of fscrypt, Android and Chromium OS, achieve
this by having PID 1 create a "session keyring" that is inherited by
every process.  This works, but it isn't scalable because it prevents
session keyrings from being used for any other purpose.

On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't
similarly abuse the session keyring, so to make 'sudo' work on all
systems it has to link all the user keyrings into root's user keyring
[2].  This is ugly and raises security concerns.  Moreover it can't make
the keys available to system services, such as sshd trying to access the
user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to
read certificates from the user's home directory (see [5]); or to Docker
containers (see [6], [7]).

By having an API to add a key to the *filesystem* we'll be able to fix
the above bugs, remove userspace workarounds, and clearly express the
intended semantics: the locked/unlocked status of an encrypted directory
is global, and encryption is orthogonal to OS-level access control.

Why not use the add_key() syscall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We use an ioctl for this API rather than the existing add_key() system
call because the ioctl gives us the flexibility needed to implement
fscrypt-specific semantics that will be introduced in later patches:

- Supporting key removal with the semantics such that the secret is
  removed immediately and any unused inodes using the key are evicted;
  also, the eviction of any in-use inodes can be retried.

- Calculating a key-dependent cryptographic identifier and returning it
  to userspace.

- Allowing keys to be added and removed by non-root users, but only keys
  for v2 encryption policies; and to prevent denial-of-service attacks,
  users can only remove keys they themselves have added, and a key is
  only really removed after all users who added it have removed it.

Trying to shoehorn these semantics into the keyrings syscalls would be
very difficult, whereas the ioctls make things much easier.

However, to reuse code the implementation still uses the keyrings
service internally.  Thus we get lockless RCU-mode key lookups without
having to re-implement it, and the keys automatically show up in
/proc/keys for debugging purposes.

References:

    [1] https://github.com/google/fscrypt
    [2] https://goo.gl/55cCrI#heading=h.vf09isp98isb
    [3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939
    [4] https://github.com/google/fscrypt/issues/116
    [5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715
    [6] https://github.com/google/fscrypt/issues/128
    [7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:06:13 -07:00