Commit Graph

125 Commits

Author SHA1 Message Date
Linus Torvalds f23eb2b2b2 tty: stop using "delayed_work" in the tty layer
Using delayed-work for tty flip buffers ends up causing us to wait for
the next tick to complete some actions.  That's usually not all that
noticeable, but for certain latency-critical workloads it ends up being
totally unacceptable.

As an extreme case of this, passing a token back-and-forth over a pty
will take two ticks per iteration, so even just a thousand iterations
will take 8 seconds assuming a common 250Hz configuration.

Avoiding the whole delayed work issue brings that ping-pong test-case
down to 0.009s on my machine.

In more practical terms, this latency has been a performance problem for
things like dive computer simulators (simulating the serial interface
using the ptys) and for other environments (Alan mentions a CP/M emulator).

Reported-by: Jef Driesen <jefdriesen@telenet.be>
Acked-by: Greg KH <gregkh@suse.de>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 16:17:32 -07:00
Alan Cox 8d075b199b tty: add a helper for setting termios data from kernel side
This basically encapsulates the small bit of locking knowledge needed. While
we are at it make sure we blow up on any more abusers and unsafe misuses of
ioctl for this kind of stuff.

We change the function to return an argument as at some point it needs to
honour the POSIX 'I asked for changes but got none of them' error reporting
corner case.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 12:03:52 -08:00
Greg Kroah-Hartman 94c2273d6c tty: fix build error in vt_ioctl.c if CONFIG_COMPAT is enabled
This was caused by the previous patch to remove the file pointer
from the tty ioctl handler.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 12:02:51 -08:00
Alan Cox 6caa76b778 tty: now phase out the ioctl file pointer for good
Only oddities here are a couple of drivers that bogusly called the ldisc
helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes
away.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 11:59:56 -08:00
Linus Torvalds eed5ee1a3a Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: mfd: adjust the baud rate setting
  TTY: open/hangup race fixup
  TTY: don't allow reopen when ldisc is changing
  NET: wan/x25, fix ldisc->open retval
  TTY: ldisc, fix open flag handling
  serial8250: Mark console as CON_ANYTIME
2010-12-02 12:58:16 -08:00
Jiri Slaby acfa747baf TTY: open/hangup race fixup
Like in the "TTY: don't allow reopen when ldisc is changing" patch,
this one fixes a TTY WARNING as described in the option 1) there:
1) __tty_hangup from tty_ldisc_hangup to tty_ldisc_enable. During this
section tty_lock is held. However tty_lock is temporarily dropped in
the middle of the function by tty_ldisc_hangup.

The fix is to introduce a new flag which we set during the unlocked
window and check it in tty_reopen too. The flag is TTY_HUPPING and is
cleared after TTY_HUPPED is set.

While at it, remove duplicate TTY_HUPPED set_bit. The one after
calling ops->hangup seems to be more correct. But anyway, we hold
tty_lock, so there should be no difference.

Also document the function it does that kind of crap.

Nicely reproducible with two forked children:
static void do_work(const char *tty)
{
	if (signal(SIGHUP, SIG_IGN) == SIG_ERR) exit(1);
	setsid();
	while (1) {
		int fd = open(tty, O_RDWR|O_NOCTTY);
		if (fd < 0) continue;
		if (ioctl(fd, TIOCSCTTY)) continue;
		if (vhangup()) continue;
		close(fd);
	}
	exit(0);
}

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: <Valdis.Kletnieks@vt.edu>
Reported-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29 14:52:48 -08:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Alan Cox 65f8e441ed tty: Fix formatting in tty.h
Someone added a new ldisc number and messed up the tabbing. Fix it before
anyone else copies it.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-09 14:36:23 -08:00
Thomas Gleixner 3c80fe4ac9 audit: Call tty_audit_push_task() outside preempt disabled
While auditing all tasklist_lock read_lock sites I stumbled over the
following call chain:

audit_prepare_user_tty()
  read_lock(&tasklist_lock);
  tty_audit_push_task();
     mutex_lock(&buf->mutex);

     --> buf->mutex is locked with preemption disabled.

Solve this by acquiring a reference to the task struct under
rcu_read_lock and call tty_audit_push_task outside of the preempt
disabled region.

Move all code which needs to be protected by sighand lock into
tty_audit_push_task() and use lock/unlock_sighand as we do not hold
tasklist_lock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-30 08:45:25 -04:00
Greg Kroah-Hartman e4c5bf8e3d Merge 'staging-next' to Linus's tree
This merges the staging-next tree to Linus's tree and resolves
some conflicts that were present due to changes in other trees that were
affected by files here.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28 09:44:56 -07:00
Pekka Enberg f573bd1764 tty: Remove __GFP_NOFAIL from tty_add_file()
This patch removes __GFP_NOFAIL use from tty_add_file() and adds proper error
handling to the call-sites of the function.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:19:58 -07:00
Dmitry Eremin-Solenikov 30004ac9c0 tty: add tty_struct->dev pointer to corresponding device instance
Some device drivers (mostly tty line disciplines) would like to have way
know a struct device instance corresponding to passed tty_struct. Add
a struct device pointer to struct tty_struct and populate it during
initialize_tty_struct().

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:19:56 -07:00
Pavan Savoy 40fb29a777 tty.h: new ldisc for TI WiLink ST
Texas Instrument's WiLink7 connectivity devices pack wireless connectivity
technologies like Bluetooth, FM Radio Receiver and Transmitter, GPS and WLAN
into a single die.
The BT, FM and GPS core on the chip are interfaced to application
processors via a single UART.

This line discipline driver allows such different technologies to be used
simultaneous and independent of each other.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 11:48:07 -07:00
Nick Piggin d996b62a8d tty: fix fu_list abuse
tty: fix fu_list abuse

tty code abuses fu_list, which causes a bug in remount,ro handling.

If a tty device node is opened on a filesystem, then the last link to the inode
removed, the filesystem will be allowed to be remounted readonly. This is
because fs_may_remount_ro does not find the 0 link tty inode on the file sb
list (because the tty code incorrectly removed it to use for its own purpose).
This can result in a filesystem with errors after it is marked "clean".

Taking idea from Christoph's initial patch, allocate a tty private struct
at file->private_data and put our required list fields in there, linking
file and tty. This makes tty nodes behave the same way as other device nodes
and avoid meddling with the vfs, and avoids this bug.

The error handling is not trivial in the tty code, so for this bugfix, I take
the simple approach of using __GFP_NOFAIL and don't worry about memory errors.
This is not a problem because our allocator doesn't fail small allocs as a rule
anyway. So proper error handling is left as an exercise for tty hackers.

[ Arguably filesystem's device inode would ideally be divorced from the
driver's pseudo inode when it is opened, but in practice it's not clear whether
that will ever be worth implementing. ]

Cc: linux-kernel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18 08:35:47 -04:00
Nick Piggin ee2ffa0dfd fs: cleanup files_lock locking
fs: cleanup files_lock locking

Lock tty_files with a new spinlock, tty_files_lock; provide helpers to
manipulate the per-sb files list; unexport the files_lock spinlock.

Cc: linux-kernel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18 08:35:47 -04:00
Arnd Bergmann b07471fa51 tty: implement BTM as mutex instead of BKL
The tty locking now follows the rules for mutexes, so
we can replace the BKL usage with a new subsystem
wide mutex.

Using a regular mutex here will change the behaviour
when blocked on the BTM from spinning to sleeping,
but that should not be visible to the user.

Using the mutex also means that all the BTM is now
covered by lockdep.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 13:47:44 -07:00
Arnd Bergmann ddcd9fb66a tty: remove tty_lock_nested
This changes all remaining users of tty_lock_nested
to be non-recursive, which lets us kill this function.
As a consequence, we won't need to keep the lock count
any more, which allows more simplifications later.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 13:47:44 -07:00
Arnd Bergmann be1bc2889a tty: introduce wait_event_interruptible_tty
Calling wait_event_interruptible implicitly
releases the BKL when it sleeps, but we need
to do this explcitly when we have converted
it to a mutex.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 13:47:43 -07:00
Arnd Bergmann ec79d6056d tty: replace BKL with a new tty_lock
As a preparation for replacing the big kernel lock
in the TTY layer, wrap all the callers in new
macros tty_lock, tty_lock_nested and tty_unlock.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 13:47:43 -07:00
hyc@symas.com 26df6d1340 tty: Add EXTPROC support for LINEMODE
This patch is against the 2.6.34 source.

Paraphrased from the 1989 BSD patch by David Borman @ cray.com:

     These are the changes needed for the kernel to support
     LINEMODE in the server.

     There is a new bit in the termios local flag word, EXTPROC.
     When this bit is set, several aspects of the terminal driver
     are disabled.  Input line editing, character echo, and mapping
     of signals are all disabled.  This allows the telnetd to turn
     off these functions when in linemode, but still keep track of
     what state the user wants the terminal to be in.

     New ioctl:
         TIOCSIG         Generate a signal to processes in the
                         current process group of the pty.

     There is a new mode for packet driver, the TIOCPKT_IOCTL bit.
     When packet mode is turned on in the pty, and the EXTPROC bit
     is set, then whenever the state of the pty is changed, the
     next read on the master side of the pty will have the TIOCPKT_IOCTL
     bit set.  This allows the process on the server side of the pty
     to know when the state of the terminal has changed; it can then
     issue the appropriate ioctl to retrieve the new state.

Since the original BSD patches accompanied the source code for telnet
I've left that reference here, but obviously the feature is useful for
any remote terminal protocol, including ssh.

The corresponding feature has existed in the BSD tty driver since 1989.
For historical reference, a good copy of the relevant files can be found
here:

http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741

Signed-off-by: Howard Chu <hyc@symas.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 13:47:39 -07:00
David Howells 31d1d48e19 Fix init ordering of /dev/console vs callers of modprobe
Make /dev/console get initialised before any initialisation routine that
invokes modprobe because if modprobe fails, it's going to want to open
/dev/console, presumably to write an error message to.

The problem with that is that if the /dev/console driver is not yet
initialised, the chardev handler will call request_module() to invoke
modprobe, which will fail, because we never compile /dev/console as a
module.

This will lead to a modprobe loop, showing the following in the kernel
log:

	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1

This can happen, for example, when the built in md5 module can't find
the built in cryptomgr module (because the latter fails to initialise).
The md5 module comes before the call to tty_init(), presumably because
'crypto' comes before 'drivers' alphabetically.

Fix this by calling tty_init() from chrdev_init().

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06 09:17:02 -07:00
Alan Cox e1eaea46bb tty: n_gsm line discipline
Add an implementation of GSM 0710 MUX. The implementation currently supports

- Basic and advanced framing (as either end of the link)
- UI or UIH data frames
- Adaption layer 1-4 (1 and 2 via tty, 3 and 4 as skbuff lists)
- Modem and control messages including the correct retry process
- Flow control

and exposes the MUX channels as a set of virtual tty devices including modem
signals. This is an experimental driver.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:29 -07:00
Pavan Savoy 1ff454ef9b serial: TTY: new ldiscs for staging
Push the max ldiscs by a few number to allow ldiscs
to exist in the staging directory and elsewhere.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:29 -07:00
David S. Miller 4a35ecf8bf Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bonding/bond_main.c
	drivers/net/via-velocity.c
	drivers/net/wireless/iwlwifi/iwl-agn.c
2010-04-06 23:53:30 -07:00
Sjur Braendeland 9b27105b4a net-caif-driver: add CAIF serial driver (ldisc)
Add CAIF Serial driver. This driver is implemented as a line discipline.

caif_serial uses the following module parameters:
ser_use_stx - specifies if STart of frame eXtension is in use.
ser_loop    - sets the interface in loopback mode.

Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30 19:08:50 -07:00
Jason Wessel 336cee42dd tty_port,usb-console: Fix usb serial console open/close regression
Commit e1108a63e1 ("usb_serial: Use the
shutdown() operation") breaks the ability to use a usb console
starting in 2.6.33.  This was observed when using
console=ttyUSB0,115200 as a boot argument with an FTDI device.  The
error is:

ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22

The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in
tty_port_shutdown() it always clears the flag if it is set.  The fix
is to add a variable to the tty_port struct to indicate when the tty
port is a console.

CC: Alan Cox <alan@linux.intel.com>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:17:57 -07:00
Mel Gorman 352fa6ad16 tty: Take a 256 byte padding into account when buffering below sub-page units
The TTY layer takes some care to ensure that only sub-page allocations
are made with interrupts disabled. It does this by setting a goal of
"TTY_BUFFER_PAGE" to allocate. Unfortunately, while TTY_BUFFER_PAGE takes the
size of tty_buffer into account, it fails to account that tty_buffer_find()
rounds the buffer size out to the next 256 byte boundary before adding on
the size of the tty_buffer.

This patch adjusts the TTY_BUFFER_PAGE calculation to take into account the
size of the tty_buffer and the padding. Once applied, tty_buffer_alloc()
should not require high-order allocations.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:17:53 -07:00
Rodolfo Giometti 572b9adbd4 ldisc n_tty: add new method n_tty_inherit_ops()
This new method can be used to init a new struct tty_ldisc_ops as the
default tty_ldisc_N_TTY struct.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:43 -08:00
Alan Cox d9661adfb8 tty: Keep the default buffering to sub-page units
We allocate during interrupts so while our buffering is normally diced up
small anyway on some hardware at speed we can pressure the VM excessively
for page pairs. We don't really need big buffers to be linear so don't try
so hard.

In order to make this work well we will tidy up excess callers to request_room,
which cannot itself enforce this break up.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:43:23 -08:00
Randy Dunlap 2427b8e3ea tty.h: make tty_port_get() static inline
I get a few dozen of these warnings when using
  gcc (GCC) 4.4.1 20090725 (Red Hat 4.4.1-2):

In file included from mmotm-2010-0113-1217/init/do_mounts.c:5:
mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get':
mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static

so make the function static inline.

[akpm@linux-foundation.org: may as well convert tty_port_users() also]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16 12:15:38 -08:00
Bernhard Walle 5ada918b82 vt: introduce and use vt_kmsg_redirect() function
The kernel offers with TIOCL_GETKMSGREDIRECT ioctl() the possibility to
redirect the kernel messages to a specific console.

However, since it's not possible to switch to the kernel message console
after a panic(), it would be nice if the kernel would print the panic
message on the current console.

This patch series adds a new interface to access the global kmsg_redirect
variable by a function to be able to use it in code where
CONFIG_VT_CONSOLE is not set (kernel/panic.c).

This patch:

Instead of using and exporting a global value kmsg_redirect, introduce a
function vt_kmsg_redirect() that both can set and return the console where
messages are printed.

Change all users of kmsg_redirect (the VT code itself and kernel/power.c)
to the new interface.

The main advantage is that vt_kmsg_redirect() can also be used when
CONFIG_VT_CONSOLE is not set.

Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:28 -08:00
Alan Cox eeb89d918c tty: push the BKL down into the handlers a bit
Start trying to untangle the remaining BKL mess

Updated to fix missing unlock_kernel noted by Dan Carpenter

Signed-off-by: Alan "I must be out of my tree" Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 15:18:08 -08:00
Alan Cox 568aafc627 tty: tty_port: Add a kref object to the tty port
Users of tty port need a way to refcount ports when hotplugging is
involved.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 15:18:07 -08:00
Alan Cox 44e4909e45 tty: tty_port: Change the buffer allocator locking
We want to be able to do this without regard for the activate/own open
method being used which causes a problem using port->mutex. Add another
mutex for now. Once everything uses port_open to do buffer allocs we can
kill it back off

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 15:18:06 -08:00
Alan Cox 64bc397914 tty_port: add "tty_port_open" helper
For the moment this just moves the USB logic over and fixes the 'what if
we open and hangup at the same time' race noticed by Oliver Neukum.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 15:18:04 -08:00
Arnd Bergmann e92166517e tty: handle VT specific compat ioctls in vt driver
The VT specific compat_ioctl handlers are the only ones
in common code that require the BKL. Moving them into
the vt driver lets us remove the BKL from the other handlers
and cleans up the code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:35 -07:00
Alan Cox b58d13a021 serial: move port users helper
This little helper is now tty_port specific and useful generally so move it

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:32 -07:00
Alan Cox bdc04e3174 serial: move delta_msr_wait into the tty_port
This is used by various drivers not just serial and can be extracted
as commonality

Signed-off-by: Alan Cox <alan@linux.intel.com>
2009-09-19 13:13:31 -07:00
Alan Cox 5e99df561f serial: Fold closing_* fields into the tty_port ones
Remove some more serial specific use

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:28 -07:00
Alan Cox 7ca0ff9ab3 tty: Add a full port_close function
Now we are extracting out methods for shutdown and the like we can add a
proper tty_port_close method that knows all the innards of the tty closing
process and hides the lot from the caller.

At some point in the future this will be paired with a similar open()
helper and the drivers can stick to hardware management.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 13:13:20 -07:00
Anirban Sinha 353f6dd2de cleanup console_print()
console_print() is an old legacy interface mostly unused in the entire
kernel tree. It's best to clean up its existing use and let developers
use their own implementation of it as they feel fit.

Signed-off-by: Anirban Sinha <asinha@zeugmasystems.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-14 17:41:42 -07:00
Takashi Iwai e0b3032bcd Merge branch 'topic/asoc' into for-linus
* topic/asoc: (226 commits)
  ASoC: au1x: PSC-AC97 bugfixes
  ASoC: Fix WM835x Out4 capture enumeration
  ASoC: Remove unuused hw_read_t
  ASoC: fix pxa2xx-ac97.c breakage
  ASoC: Fully specify DC servo bits to update in wm_hubs
  ASoC: Debugged improper setting of PLL fields in WM8580 driver
  ASoC: new board driver to connect bfin-5xx with ad1836 codec
  ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI
  ASoC: davinci: i2c device creation moved into board files
  ASoC: Don't reconfigure WM8350 FLL if not needed
  ASoC: Fix s3c-i2s-v2 build
  ASoC: Make platform data optional for TLV320AIC3x
  ASoC: Add S3C24xx dependencies for Simtec machines
  ASoC: SDP3430: Fix TWL GPIO6 pin mux request
  ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time
  ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop
  ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI
  OMAP: McBSP: Use textual values in DMA operating mode sysfs files
  ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510
  ASoC: Select core DMA when building for S3C64xx
  ...
2009-09-10 15:32:40 +02:00
Janusz Krzysztofik b7b8f9bf0c TTY/ASoC: Rename N_AMSDELTA line discipline to N_V253
The patch changes the line discipline name registered in include/linux/tty.h
and updates the ams-delta machine driver to use it.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07 11:48:02 +01:00
Janusz Krzysztofik 78ed73e84d TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver
This patch adds new line discipline name an number to include/linux/tty.h. The
line discipline will be used by the Amstrad E3 (Delta) sound driver that will
come next in this series of patches.

Created against linux-2.6.31-rc3.
Applies to linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as
well.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-31 22:38:44 +01:00
OGAWA Hirofumi e043e42bdb pty: avoid forcing 'low_latency' tty flag
We really don't want to mark the pty as a low-latency device, because as
Alan points out, the ->write method can be called from an IRQ (ppp?),
and that means we can't use ->low_latency=1 as we take mutexes in the
low_latency case.

So rather than using low_latency to force the written data to be pushed
to the ldisc handling at 'write()' time, just make the reader side (or
the poll function) do the flush when it checks whether there is data to
be had.

This also fixes the problem with lost data in an emacs compile buffer
(bugzilla 13815), and we can thus revert the low_latency pty hack
(commit 3a54297478e6578f96fd54bf4daa1751130aca86: "pty: quickfix for the
pty ENXIO timing problems").

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ Modified to do the tty_flush_to_ldisc() inside input_available_p() so
  that it triggers for both read and poll()  - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 12:15:56 -07:00
Alan Cox c65c9bc3ef tty: rewrite the ldisc locking
There are several pretty much unfixable races in the old ldisc code, especially
with respect to pty behaviour and also to hangup. It's easier to rewrite the
code than simply try and patch it up.

This patch
- splits the ldisc from the tty (so we will be able to refcount it more cleanly
  later)
- introduces a mutex lock for ldisc changing on an active device
- fixes the complete mess that hangup caused
- implements hopefully correct setldisc/close/hangup locking

There are still some problems around pty pairs that have always been there but
at least it is now possible to understand the code and fix further problems.

This fixes the following known bugs
- hang up can leak ldisc references
- hang up may not call open/close on ldisc in a matched way
- pty/tty pairs can deadlock during an ldisc change
- reading the ldisc proc files can cause every ldisc to be loaded

and probably a few other of the mysterious ldisc race reports.

I'm sure it also adds the odd new one.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:01 -07:00
Alan Cox e8b70e7d3e tty: Extract various bits of ldisc code
Before trying to tackle the ldisc bugs the code needs to be a good deal
more readable, so do the simple extractions of routines first.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:01 -07:00
Alan Cox 1ec739be75 tty: Implement a drain delay in the tty port
We need this for devices that cannot flush and wait, but which do not order
data and modem events. Without it we will hang up before all the data
clears the hardware. Needed for the USB changes.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:56 -07:00
Alan Cox fcc8ac1825 tty: Add carrier processing on close to the tty_port core
Some drivers implement this internally, others miss it out. Push the
behaviour into the core code as that way everyone will do it consistently.

Update the dtr rts method to raise or lower depending upon flags. Having a
single method in this style fits most of the implementations more cleanly than
two funtions.

We need this in place before we tackle the USB side

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:56 -07:00
Alan Cox a6614999e8 tty: Introduce some close helpers for ports
Again this is a lot of common code we can unify

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:40 -08:00