There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good. This
was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly
tricky and error-prone code.
There is a small merge conflict against a parisc cleanup, the
solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel. The
hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
There are some obvious conflicts against changes to the removed
files.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks.
-----BEGIN PGP SIGNATURE-----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=vtCN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Use ida_alloc() instead of ida_simple_get() for ACPI enumeration
of devices (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=uB8P
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new functionality perspective, the most significant items
here are the new driver for the 'ARM Generic Diagnostic Dump and
Reset' device, the extension of fine grain fan control in the ACPI fan
driver, and the change making it possible to use CPPC information to
obtain CPU capacity.
There are also a few new quirks, a bunch of fixes, including the
platform-level _OSC handling change to make it actually take the
platform firmware response into account, some code and documentation
cleanups, and a notable update of the ACPI device enumeration
documentation.
Specifics:
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Use ida_alloc() instead of ida_simple_get() for ACPI enumeration of
devices (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko)"
* tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
clocksource: acpi_pm: fix return value of __setup handler
ACPI: bus: Avoid using CPPC if not supported by firmware
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
arm64, topology: enable use of init_cpu_capacity_cppc()
arch_topology: obtain cpu capacity using information from CPPC
x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()
ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
ACPI: tables: Add AGDI to the list of known table signatures
ACPI/APEI: Limit printable size of BERT table data
ACPI: docs: gpio-properties: Unify ASL style for GPIO examples
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
ACPI: APEI: fix return value of __setup handlers
x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
x86: Expose init_freq_invariance() to topology header
x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
ACPICA: Avoid walking the ACPI Namespace if it is not there
...
Core code:
- Make the NOHZ handling of the timekeeping/tick core more robust to
prevent a rare jiffies update stall.
- Handle softirqs in the NOHZ/idle case correctly
Drivers:
- Add support for event stream scaling of the 1GHz counter on ARM(64)
- Correct an error code check in the timer-of layer
- The usual cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=sdyh
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and timekeeping updates from Thomas Gleixner:
"Core code:
- Make the NOHZ handling of the timekeeping/tick core more robust to
prevent a rare jiffies update stall.
- Handle softirqs in the NOHZ/idle case correctly
Drivers:
- Add support for event stream scaling of the 1GHz counter on ARM(64)
- Correct an error code check in the timer-of layer
- The usual cleanups and improvements all over the place"
* tag 'timers-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
lib/irq_poll: Declare IRQ_POLL softirq vector as ksoftirqd-parking safe
tick/rcu: Stop allowing RCU_SOFTIRQ in idle
tick/rcu: Remove obsolete rcu_needs_cpu() parameters
tick: Detect and fix jiffies update stall
clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()
clocksource/drivers/timer-microchip-pit64b: Use 5MHz for clockevent
clocksource/drivers/timer-microchip-pit64b: Use notrace
clocksource/drivers/timer-microchip-pit64b: Remove mmio selection
dt-bindings: timer: Tegra: Convert text bindings to yaml
clocksource/drivers/imx-tpm: Move tpm_read_sched_clock() under CONFIG_ARM
clocksource/drivers/arm_arch_timer: Use event stream scaling when available
clocksource/drivers/exynos_mct: Increase the size of name array
clocksource/drivers/exynos_mct: Bump up mct max irq number
clocksource/drivers/exynos_mct: Remove mct interrupt index enum
clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts
clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix
clocksource/drivers/imx-tpm: Exclude sched clock for ARM64
clocksource: Add a Kconfig option for WATCHDOG_MAX_SKEW
clocksource/drivers/imx-tpm: Update name of clkevt
clocksource/drivers/imx-tpm: Add CLOCK_EVT_FEAT_DYNIRQ
...
Merge ACPI power management changes, ACPI device properties handling
changes, x86-specific ACPI changes and miscellaneous ACPI changes for
5.18-rc1:
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
* acpi-pm:
ACPI: EC / PM: Print additional debug message in acpi_ec_dispatch_gpe()
ACPI: PM: Print additional debug message in acpi_s2idle_wake()
* acpi-properties:
ACPI: property: Get rid of redundant 'else'
ACPI: properties: Consistently return -ENOENT if there are no more references
* acpi-misc:
clocksource: acpi_pm: fix return value of __setup handler
ACPI: clean up double words in two comments
* acpi-x86:
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
x86: Expose init_freq_invariance() to topology header
x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
The __setup() handler interface isn't meant to handle negative return
values -- they are non-zero, so they mean "handled" (like a return
value of 1 does), but that's just a quirk. So return 1 from
parse_pmtmr(). Also print a warning message if kstrtouint() returns
an error.
Fixes: 6b148507d3 ("pmtmr: allow command line override of ioport")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
the base address (Guillaume Ranquet)
- Remove MMIO dependency, add notrace annotation for sched_clock
and increase the timer resolution for the Microchip
PIT64b (Claudiu Beznea)
- Convert DT bindings to yaml for the Tegra timer (David Heidelberg)
- Fix compilation error on architecture other than ARM for the
i.MX TPM (Nathan Chancellor)
- Add support for the event stream scaling for 1GHz counter on
the arch ARM timer (Marc Zyngier)
- Support a higher number of interrupts by the Exynos MCT timer
driver (Alim Akhtar)
- Detect and prevent memory corruption when the specified number
of interrupts in the DTS is greater than the array size in the
code for the Exynos MCT timer (Krzysztof Kozlowski)
- Fix regression from a previous errata fix on the TI DM
timer (Drew Fustini)
- Several fixes and code improvements for the i.MX TPM
driver (Peng Fan)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmInK5IACgkQqDIjiipP
6E8RGwf+MD5KDipAWvPgpcwt5+8lO22AfUmBjDWbWWfw65UsTT0rvRFXX+nr3aO8
ETJrEyMMZMSX5ZrAiI5JYqc/Bdmxu67ycSll1z4NIjG3taZ+chxfSusa0vX63wQ1
lIGKVZu2BzU7I66Ni3UvWVag4Gsxoe9Xhmss7Y/9kZdKZT+XWgYYhttAYxKSs/a/
MnG1w3/IBsG2ZiQRwWivPdFAnkkcyRpkLy0JDRuet2W97rx6LjzGfE+6VtcjoMjy
FZ0AYg9h3yA7F0IaloVL5c6FXPLeWky7O6c4GddHPiJnw0SqnMvo0fGP5Etcjk0I
MDCMZO+3dfEu95irGIiNbS3ALDqD0Q==
=YoAx
-----END PGP SIGNATURE-----
Merge tag 'timers-v5.18-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/events updates from Daniel Lezcano:
- Fix return error code check for the timer-of layer when getting
the base address (Guillaume Ranquet)
- Remove MMIO dependency, add notrace annotation for sched_clock
and increase the timer resolution for the Microchip
PIT64b (Claudiu Beznea)
- Convert DT bindings to yaml for the Tegra timer (David Heidelberg)
- Fix compilation error on architecture other than ARM for the
i.MX TPM (Nathan Chancellor)
- Add support for the event stream scaling for 1GHz counter on
the arch ARM timer (Marc Zyngier)
- Support a higher number of interrupts by the Exynos MCT timer
driver (Alim Akhtar)
- Detect and prevent memory corruption when the specified number
of interrupts in the DTS is greater than the array size in the
code for the Exynos MCT timer (Krzysztof Kozlowski)
- Fix regression from a previous errata fix on the TI DM
timer (Drew Fustini)
- Several fixes and code improvements for the i.MX TPM
driver (Peng Fan)
Link: https://lore.kernel.org/all/a8cd9be9-7d70-80df-2b74-1a8226a215e1@linaro.org
of_base->base can either be iomapped using of_io_request_and_map() or
of_iomap() depending whether or not an of_base->name has been set.
Thus check of_base->base against NULL as of_iomap() does not return a
PTR_ERR() in case of error.
Fixes: 9aea417afa ("clocksource/drivers/timer-of: Don't request the resource by name")
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20220307172656.4836-1-granquet@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When building this driver for an architecture other than ARCH=arm:
drivers/clocksource/timer-imx-tpm.c:78:20: error: unused function 'tpm_read_sched_clock' [-Werror,-Wunused-function]
static u64 notrace tpm_read_sched_clock(void)
^
1 error generated.
Move the function definition under the existing CONFIG_ARM section so
there is no more warning.
Fixes: 10720e120e ("clocksource/drivers/imx-tpm: Exclude sched clock for ARM64")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220303184212.2356245-1-nathan@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
With FEAT_ECV and the 1GHz counter, it is pretty likely that the
event stream divider doesn't fit in the field that holds the
divider value (we only have 4 bits to describe counter bits [15:0]
Thankfully, FEAT_ECV also provides a scaling mechanism to switch
the field to cover counter bits [23:8] instead.
Enable this on arm64 when ECV is available (32bit doesn't have
any detection infrastructure and is unlikely to be run on an
ARMv8.6 system anyway).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220203170502.2694422-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Variable _name_ hold mct_tick number per cpu and it is currently
limited to 10. Which restrict the scalability of the MCT driver for
the SoC which has more local timers interrupts (>= 12).
Increase the length of it to make mct_tick printed correctly for
each local timer interrupts per CPU.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220221174547.26176-3-alim.akhtar@samsung.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Bump-up maximum number of MCT IRQ to match the binding
documentation. This make driver scalable for SoC which
has more than 12 timer irqs, like recently added FSD SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220221174547.26176-2-alim.akhtar@samsung.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
MCT driver define an enum which list global and local timer's
irq index. Most of them are not used but MCT_G0_IRQ and
MCT_L0_IRQ and these two are at a fixed offset/index.
Get rid of this enum and use a #define for the used irq index.
No functional changes expected.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220221174547.26176-1-alim.akhtar@samsung.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The driver statically defines maximum number of interrupts it can
handle, however it does not respect that limit when configuring them.
When provided with a DTS with more interrupts than assumed, the driver
will overwrite static array mct_irqs leading to silent memory
corruption.
Validate the interrupts coming from DTS to avoid this. This does not
change the fact that such DTS might not boot at all, because it is
simply incompatible, however at least some warning will be printed.
Fixes: 36ba5d527e ("ARM: EXYNOS: add device tree support for MCT controller driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220220103815.135380-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit
RISC target designed by Andes Technologies. Support was added to the
kernel in 2016 as the replacement RISC-V based V5 processors were
already announced, and maintained by (current or former) Andes
employees.
As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.
While the port is still in a reasonably good shape, it only gets
worse over time without active maintainers, so it seems best
to remove it before it becomes unusable. As always, if it turns
out that there are mainline users after all, and they volunteer
to maintain the port in the future, the removal can be reverted.
Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/
Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/
Link: https://www.andestech.com/en/products-solutions/andestar-architecture/
Signed-off-by: Alan Kao <alankao@andestech.com>
[arnd: rewrite changelog to provide more background]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devkit8000 board seems to always used 32k_counter as clocksource.
Restore this behavior.
If clocksource is back to 32k_counter, timer12 is now the clockevent
source (as before) and timer2 is not longer needed here.
This commit fixes the same issue observed with commit 23885389db
("ARM: dts: Fix timer regression for beagleboard revision c") when sleep
is blocked until hitting keys over serial console.
Fixes: aba1ad05da ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Fixes: e428e250fd ("ARM: dts: Configure system timers for omap3")
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
For ARM64 platform such as i.MX8ULP which has ARMv8 generic timer as sched
clock, which is much faster compared with tpm sched clock. Reading the
tpm count register in i.MX8ULP requires about 290ns, this is slow and
introduce scheduler latency. So exclude tpm sched clock for ARM64
platform.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220105124304.3567629-1-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
-----BEGIN PGP SIGNATURE-----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=hMu7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iogZ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
* tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Don't use legacy clock defines for dra7 clkctrl
clk: ti: Move dra7 clock devices out of the legacy section
ARM: dts: Fix timer regression for beagleboard revision c
ARM: dts: am335x-wega: Fix typo in mcasp property rx-num-evt
ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of
ARM: OMAP2+: hwmod: Add of_node_put() before break
Link: https://lore.kernel.org/r/pull-1641801310-149268@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The tpm driver is not only for i.MX7ULP now, i.MX8ULP also use it. It
maybe also used by other i.MX variants, so update name to reflect it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20211214120737.1611955-6-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add CLOCK_EVT_FEAT_DYNIRQ to allow the IRQ could be runtime set affinity
to the cores that needs wake up, otherwise saying core0 has to send
IPI to wakeup core1. With CLOCK_EVT_FEAT_DYNIRQ set, when broadcast
timer could wake up the cores, IPI is not needed.
Acked-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20211214120737.1611955-5-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Per the Documentation,
IRQF_IRQPOLL is used for polling (only the interrupt that is registered
first in a shared interrupt is considered for performance reasons)
The TPM timer is not sharing interrupt with others, and pass irqpoll
not make sense for i.MX platform.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20211214120737.1611955-3-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Per the Documentation,
IRQF_IRQPOLL is used for polling (only the interrupt that is registered
first in a shared interrupt is considered for performance reasons)
But this timer is not sharing interrupt line with others, and
actually irqpoll not work with this timer with IRQF_IRQPOLL set, so
drop the flag.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20211214120737.1611955-2-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
functional changes (Marek Szyprowski)
- Add imx8ulp compatible string for NPX TPM driver (Jacky Bai)
- Fix comma introduced by error by replacing it by the initial
semicolon on the Exynos_mct (Will Deacon)
- Add OSTM driver support on Renesas. The reset line must be
deasserted before accessing the registers. This change depends on an
external change resulting in a shared immutable branch
'reset/of-get-optional-exclusive' from
git://git.pengutronix.de/pza/linux (Biju Das)
- Make the OSTM Kconfig option visible to user in order to let him
disable it when ARM architected timers is enabled (Biju Das)
- Tag two variables on iMX sysctr _ro_afterinit (Peng Fan)
- Set the cpumask to cpu_possible_mask in order to have full benefit
of the DYNIRQ flag on iMX sysctr (Peng Fan)
- Tag __maybe_unused a variable in the Pistachio timer driver in order
to fix a warning reported by the kernel test robot (Drew Fustini)
- Add MStar MSC313e timer support and the ssd20xd-based variant, as
well as the DT bindings (Romain Perier)
- Remove the incompatible compatible string for the rk3066 (Johan
Jonker)
- Fix dts_check warnings on the cadence ttc driver by adding the power
domain bindings (Michal Simek)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmHEk0EACgkQqDIjiipP
6E98zwf+PJaoWPPn8vl0rqZqy3GiHfYD/78Fi+fMqDUaN7HbtkKCgJEX074z6B71
WvN3g2DfmkDDsbJ9BR4iSBuqRjfI3r701N4QCZgu8zPB2tqjMT7Coz18jBpTC+rt
yPr5R8yrZZ3t6KduPhFbjD/15vPGO94BcKqC/UV4lL22G4PZOUuiXFMG/UR5/3O5
NmP5VqDjzKdY0tRc22aIuQm/QOQXmEPsP+XjQxkeXC8Er9Xr7QqfwJv+QTYMrvGF
4blsknsLJiW427vlYqg+iWme7mq7zxnlKJ+ugDz2pBS/E8lC32pnApW+o3HCqfP+
gmSiHvNaq2jhLTP8E8S1Gi09g6s/zQ==
=0JsC
-----END PGP SIGNATURE-----
Merge tag 'timers-v5.17-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/events updates from Daniel Lezcano:
- Refactor resource allocation on the Exynos_mct driver without
functional changes (Marek Szyprowski)
- Add imx8ulp compatible string for NPX TPM driver (Jacky Bai)
- Fix comma introduced by error by replacing it by the initial
semicolon on the Exynos_mct (Will Deacon)
- Add OSTM driver support on Renesas. The reset line must be
deasserted before accessing the registers. This change depends on an
external change resulting in a shared immutable branch
'reset/of-get-optional-exclusive' from
git://git.pengutronix.de/pza/linux (Biju Das)
- Make the OSTM Kconfig option visible to user in order to let him
disable it when ARM architected timers is enabled (Biju Das)
- Tag two variables on iMX sysctr _ro_afterinit (Peng Fan)
- Set the cpumask to cpu_possible_mask in order to have full benefit
of the DYNIRQ flag on iMX sysctr (Peng Fan)
- Tag __maybe_unused a variable in the Pistachio timer driver in order
to fix a warning reported by the kernel test robot (Drew Fustini)
- Add MStar MSC313e timer support and the ssd20xd-based variant, as
well as the DT bindings (Romain Perier)
- Remove the incompatible compatible string for the rk3066 (Johan
Jonker)
- Fix dts_check warnings on the cadence ttc driver by adding the power
domain bindings (Michal Simek)
Link: https://lore.kernel.org/lkml/e093c706-c98d-29ee-0102-78b6d41c6164@linaro.org
On SSD20X family SoCs the timers are connected to a 432MHz clock instead
of 12MHz that all the previous chips used. There is no way to reduce or
divide these clocks in the clktree yet as we do not know exactly where
the 432MHz clock comes from but it is enabled at boot.
The SSD20X timers have an input clock divider within the timer itself
to configure the frequency. timer0 is preconfigured at power up to run
at 12MHz so it is backwards compatible and doesn't need special handling
right now. timer1 and timer2 run at 432Mhz at power up so are not
backward compatible.
This commit adds support for the input clock divider register and sets
timer1 and timer2 to run at 48Mhz for clockevents.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Link: https://lore.kernel.org/r/20211217195727.8955-3-romain.perier@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The MSC313e-compatible SoCs have 3 timer hardware blocks. All of these
are free running 32-bit increasing counters and can generate interrupts.
Based onto a maximum value register, each timer can either count from 0
to max, one time then stop (which generates interrupts) or can count
from 0 to max and then roll. This commit adds basic support for these
timers, the first timer block being used as clocksource/sched_clock
and delay, while the others will be used as clockevents.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Co-developed-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20211217195727.8955-2-romain.perier@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Commit e428e250fd ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.
Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.
Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.
Fixes: e428e250fd ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Variable 'overflow' set but not used, but this is the intended behavior.
The hardware only updates the counter register after the overflow
register read. However, the value of overflow is not actually needed.
Link: https://lore.kernel.org/lkml/202111200402.afQsussU-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20211123192524.1038304-1-dfustini@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The syctr interrupt could set the affinity to any cores in the
SoC. However, the default affinity is set to cpu 0.
This timer will be used as broadcast timer on all the i.MX
SoCs. Because DYNIRQ flag is set, the core time framework will runtime
set the interrupt affinity to the cores that needs to wake up and the
cpumask will runtime set to the core that will be wake up. So even the
sysctr initialization use cpumask 0, there is no issue, the current
patch is just use cpu_possible_mask to show the fact that the timer
supports routed to all the cpu cores and nothing else.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20211201125030.2307746-2-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
With some specific kernel configuration and Clang, the kernel fails
to like with something like:
ld.lld: error: undefined symbol: __compiletime_assert_200
>>> referenced by arch_timer.h:156 (./arch/arm64/include/asm/arch_timer.h:156)
>>> clocksource/arm_arch_timer.o:(erratum_set_next_event_generic) in archive drivers/built-in.a
ld.lld: error: undefined symbol: __compiletime_assert_197
>>> referenced by arch_timer.h:133 (./arch/arm64/include/asm/arch_timer.h:133)
>>> clocksource/arm_arch_timer.o:(erratum_set_next_event_generic) in archive drivers/built-in.a
make: *** [Makefile:1161: vmlinux] Error 1
These are due to the BUILD_BUG() macros contained in the low-level
accessors (arch_timer_reg_{write,read}_cp15) being emitted, as the
access type wasn't known at compile time.
Fix this by making erratum_set_next_event_generic() __force_inline,
resulting in the 'access' parameter to be resolved at compile time,
similarly to what is already done for set_next_event().
Fixes: 4775bc63f8 ("Add build-time guards for unhandled register accesses")
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211117113532.3895208-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The driver refuses to probe with -EINVAL since the commit 5d9814df0a
("clocksource/drivers/dw_apb_timer_of: Add error handling if no clock
available").
Before the driver used to probe successfully if either "clock-freq" or
"clock-frequency" properties has been specified in the device tree.
That commit changed
if (A && B)
panic("No clock nor clock-frequency property");
into
if (!A && !B)
return 0;
That's a bug: the reverse of `A && B` is '!A || !B', not '!A && !B'
Signed-off-by: Vadim V. Vlasov <vadim.vlasov@elpitech.ru>
Signed-off-by: Alexey Sheplyakov <asheplyakov@basealt.ru>
Fixes: 5d9814df0a ("clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available").
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vadim V. Vlasov <vadim.vlasov@elpitech.ru>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20211109153401.157491-1-asheplyakov@basealt.ru
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The variables 'sys_ctr_base' and 'cmpcr' are not be updated after
init, so mark them as __ro_after_init.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211201125030.2307746-1-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
As RZ/G2L uses the ARM Architected Timer as system timer, enabling
the OSTM is not mandatory.
Make RENESAS_OSTM symbol visible, so that user can enable it
when needed.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211112184413.4391-5-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
RZ/G2L SoC has Generic Timer Module(a.k.a OSTM) which needs to
deassert the reset line before accessing any registers.
This patch adds an entry point for RZ/G2L so that we can deassert
the reset line in probe callback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211112184413.4391-4-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."
This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Commit ae460fd916 ("clocksource/drivers/exynos_mct: Prioritise Arm
arch timer on arm64") changed the rating of the MCT clockevents device
to be lower than the Arm architected timer and, in the process, replaced
a semicolon with a comma thanks to a silly copy-paste error.
Put the semicolon back so that the code looks more idiomatic and resolve
the SUSPECT_COMMA_SEMICOLON warning from checkpatch at the same time.
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211103164804.30182-1-will@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Move interrupts allocation from exynos4_timer_resources() into separate
function together with the interrupt number parsing code from
mct_init_dt(), so the code for managing interrupts is kept together.
While touching exynos4_timer_resources() function, move of_iomap() to it.
No functional changes.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211101193531.15078-2-semen.protsenko@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* More progress on the protected VM front, now with the full
fixed feature set as well as the limitation of some hypercalls
after initialisation.
* Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
* Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
* More memcg accounting of the memory allocated on behalf of a guest
* Timer and vgic selftests
* Workarounds for the Apple M1 broken vgic implementation
* KConfig cleanups
* New kvmarm.mode=none option, for those who really dislike us
RISC-V:
* New KVM port.
x86:
* New API to control TSC offset from userspace
* TSC scaling for nested hypervisors on SVM
* Switch masterclock protection from raw_spin_lock to seqcount
* Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
* Convey the exit reason to userspace on emulation failure
* Configure time between NX page recovery iterations
* Expose Predictive Store Forwarding Disable CPUID leaf
* Allocate page tracking data structures lazily (if the i915
KVM-GT functionality is not compiled in)
* Cleanups, fixes and optimizations for the shadow MMU code
s390:
* SIGP Fixes
* initial preparations for lazy destroy of secure VMs
* storage key improvements/fixes
* Log the guest CPNC
Starting from this release, KVM-PPC patches will come from
Michael Ellerman's PPC tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBOiEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNowwf/axlx3g9sgCwQHr12/6UF/7hL/RwP
9z+pGiUzjl2YQE+RjSvLqyd6zXh+h4dOdOKbZDLSkSTbcral/8U70ojKnQsXM0XM
1LoymxBTJqkgQBLm9LjYreEbzrPV4irk4ygEmuk3CPOHZu8xX1ei6c5LdandtM/n
XVUkXsQY+STkmnGv4P3GcPoDththCr0tBTWrFWtxa0w9hYOxx0ay1AZFlgM4FFX0
QFuRc8VBLoDJpIUjbkhsIRIbrlHc/YDGjuYnAU7lV/CIME8vf2BW6uBwIZJdYcDj
0ejozLjodEnuKXQGnc8sXFioLX2gbMyQJEvwCgRvUu/EU7ncFm1lfs7THQ==
=UxKM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
- No core updates
- No new clocksource/event driver
- A large rework of the ARM architected timer driver to prepare for the
support of the upcoming ARMv8.6 support
- Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers
- Address a namespace collison in the ARC sp804 timer driver
-----BEGIN PGP SIGNATURE-----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=SVx3
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Time, timers and timekeeping updates:
- No core updates
- No new clocksource/event driver
- A large rework of the ARM architected timer driver to prepare for
the support of the upcoming ARMv8.6 support
- Fix Kconfig options for Exynos MCT, Samsung PWM and TI DM timers
- Address a namespace collison in the ARC sp804 timer driver"
* tag 'timers-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-ti-dm: Select TIMER_OF
clocksource/drivers/exynosy: Depend on sub-architecture for Exynos MCT and Samsung PWM
clocksource/drivers/arch_arm_timer: Move workaround synchronisation around
clocksource/drivers/arm_arch_timer: Fix masking for high freq counters
clocksource/drivers/arm_arch_timer: Drop unnecessary ISB on CVAL programming
clocksource/drivers/arm_arch_timer: Remove any trace of the TVAL programming interface
clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations
clocksource/drivers/arm_arch_timer: Advertise 56bit timer to the core code
clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL
clocksource/drivers/arm_arch_timer: Fix MMIO base address vs callback ordering issue
clocksource/drivers/arm_arch_timer: Move drop _tval from erratum function names
clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL
clocksource/drivers/arm_arch_timer: Extend write side of timer register accessors to u64
clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessors
clocksource/arm_arch_timer: Add build-time guards for unhandled register accesses
clocksource/drivers/arc_timer: Eliminate redefined macro error
When building OMAP_DM_TIMER without TIMER_OF, there are orphan sections
due to the use of TIMER_OF_DELCARE() without CONFIG_TIMER_OF. Select
CONFIG_TIMER_OF when enaling OMAP_DM_TIMER:
arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ti-dm-systimer.o' being placed in section `__timer_of_table'
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202108282255.tkdt4ani-lkp@intel.com/
Cc: Tony Lindgren <tony@atomide.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: linux-omap@vger.kernel.org
Fixes: 52762fbd1c ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210828175747.3777891-1-keescook@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The Exynos MCT and Samsung PWM Timer clocksource drivers are not usable
on anything else than Samsung Exynos, S3C or S5P SoC platforms. These
are integral parts of a SoC. Even though the drivers are not user
selectable, still document the hardware architecture explicitly with
depends on ARCH_EXYNOS and others. This also serves a purpose of
documenting use-case, if someone ever wonders whether to select the
driver for his platform. No functional change, because drivers are
already selected by the platform described in depends. We follow similar
approach also for other SoC-specific drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211021063500.39314-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The branch is a stable branch shared with ARM maintainers for the
first 13th patches of the series:
It is based on v5.14-rc3.
As stated by the changelog:
" [... ] enabling ARMv8.6 support for timer subsystem, and was prompted by a
discussion with Oliver around the fact that an ARMv8.6 implementation
must have a 1GHz counter, which leads to a number of things to break
in the timer code:
- the counter rollover can come pretty quickly as we only advertise a
56bit counter,
- the maximum timer delta can be remarkably small, as we use the
countdown interface which is limited to 32bit...
Thankfully, there is a way out: we can compute the minimal width of
the counter based on the guarantees that the architecture gives us,
and we can use the 64bit comparator interface instead of the countdown
to program the timer.
Finally, we start making use of the ARMv8.6 ECV features by switching
accesses to the counters to a self-synchronising register, removing
the need for an ISB. Hopefully, implementations will *not* just stick
an invisible ISB there...
A side effect of the switch to CVAL is that XGene-1 breaks. I have
added a workaround to keep it alive.
I have added Oliver's original patch[0] to the series and tweaked a
couple of things. Blame me if I broke anything.
The whole things has been tested on Juno (sysreg + MMIO timers),
XGene-1 (broken sysreg timers), FVP (FEAT_ECV, CNT*CTSS_EL0).
"
Link: https://lore.kernel.org/r/20211017124225.3018098-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Unfortunately, the architecture provides no means to determine the bit
width of the system counter. However, we do know the following from the
specification:
- the system counter is at least 56 bits wide
- Roll-over time of not less than 40 years
To date, the arch timer driver has depended on the first property,
assuming any system counter to be 56 bits wide and masking off the rest.
However, combining a narrow clocksource mask with a high frequency
counter could result in prematurely wrapping the system counter by a
significant margin. For example, a 56 bit wide, 1GHz system counter
would wrap in a mere 2.28 years!
This is a problem for two reasons: v8.6+ implementations are required to
provide a 64 bit, 1GHz system counter. Furthermore, before v8.6,
implementers may select a counter frequency of their choosing.
Fix the issue by deriving a valid clock mask based on the second
property from above. Set the floor at 56 bits, since we know no system
counter is narrower than that.
[maz: fixed width computation not to lose the last bit, added
max delta generation for the timer]
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210807191428.3488948-1-oupton@google.com
Link: https://lore.kernel.org/r/20211017124225.3018098-13-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The Applied Micro XGene-1 SoC has a busted implementation of the
CVAL register: it looks like it is based on TVAL instead of the
other way around. The net effect of this implementation blunder
is that the maximum deadline you can program in the timer is
32bit wide.
Use a MIDR check to notice the broken CPU, and reduce the width
of the timer to 32bit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-10-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Similarily to the sysreg-based timer, move the MMIO over to using
the CVAL registers instead of TVAL. Note that there is no warranty
that the 64bit MMIO access will be atomic, but the timer is always
disabled at the point where we program CVAL.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-8-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Linus Torvalds