Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have 5 drivers which offset base MAC addr by port id.
Create a helper for them.
This helper takes care of overflows, which some drivers
did not do, please complain if that's going to break
anything!
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
ethernet: manual netdev->dev_addr conversions (part 2)
Manual conversions of Ethernet drivers writing directly
to netdev->dev_addr (part 2 out of 3).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Break the address up into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Break the address up into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Invert the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Multi-level qdisc offload
Petr says:
Currently, mlxsw admits for offload a suitable root qdisc, and its
children. Thus up to two levels of hierarchy are offloaded. Often, this is
enough: one can configure TCs with RED and TCs with a shaper on, and can
even see counters for each TC by looking at a qdisc at a sufficiently
shallow position.
While simple, the system has obvious shortcomings. It is not possible to
configure both RED and shaping on one TC. It is not possible to place a
PRIO below root TBF, which would then be offloaded as port shaper. FIFOs
are only offloaded at root or directly below, which is confusing to users,
because RED and TBF of course have their own FIFO.
This patch set lifts assumptions that prevent offloading multi-level qdisc
trees.
In patch #1, offload of a graft operation is added to TBF. Grafts are
issued as another qdisc is linked to the qdisc in question, and give
drivers a chance to react to the linking. The absence of this event was not
a major issue so far, because TBF was not considered classful, which
changes with this patchset.
The codebase currently assumes that ETS and PRIO are the only classful
qdiscs. The following patches gradually lift this assumption.
In patch #2, calculation of traffic class and priomap of a qdisc is fixed.
Patch #3 fixes handling of future FIFOs. Child FIFO qdiscs may be created
and notified before their parent qdisc exists and therefore need special
handling.
Patches #4, #5 and #6 unify, respectively, child destruction, child
grafting, and cleanup of statistics.
Patch #7 adds a function that validates whether a given qdisc topology is
offloadable.
Finally in patch #8, TBF and RED become classful. At this point, FIFO
qdiscs grafted to an offloaded qdisc should always be offloaded.
Patch #9 adds a selftest to verify some offloadable and unoffloadable qdisc
trees.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This checks that various qdisc configurations either are or are not
offloaded.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Permit offloading qdiscs below RED and TBF. In order to avoid having to
implement trivial propagating callbacks for get_prio_bitmap and
get_tclass_num, extend mlxsw_sp_qdisc_get_prio_bitmap() and
..._get_tclass_num() to handle the lack of the callback as a cue to forward
the request to the parent.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A following patch will enable offloading qdiscs that are deeper than
directly under root qdisc. Currently the topology validation consists of
demanding a root qdisc position for ETS and PRIO. Since RED and TBF are
considered classless, this is enough. In order to prevent some nonsensical
combinations when RED and TBF become classful, introduce a more general
topology validator.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Spectrum, there are no per-TC TX counters. Instead, mlxsw uses per-prio
counters and aggregates them according to the priomap. Therefore when
priomap changes, the counter base values need to be reset to reflect the
change. Previously, this was only done for the sole child qdisc, but a
following patch makes RED and TBF classful. Thus apply the request to the
whole sub-tree.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Qdisc graft operations have so far been reported at PRIO, ETS and RED, with
RED events ignored, because RED was not considered a classful qdisc. A
following patch will make mlxsw recognize RED and TBF as classful qdiscs,
and thus it is necessary to validate grafting at these qdiscs as well.
Rename the existing graft validator to make it clear that it is a generic
function, and invoke for RED and TBF graft events as well. Drop the
unnecessary PRIO helper and invoke the graft validator directly for PRIO as
well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently ETS and PRIO are the only offloaded classful qdiscs. Since they
are both similar, their destroy handler is the same, and it handles
children destruction itself. But now it is possible to do it generically
for any classful qdisc. Therefore promote the recursive destruction from
the ETS handler to mlxsw_sp_qdisc_destroy(), so that RED and TBF pick it up
in follow-up patches.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract from __mlxsw_sp_qdisc_ets_replace() two helpers for handling of one
future FIFO resp. reinitializing the array of future FIFOs.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when keeping track of qdiscs, mlxsw notes the TC and priomap
corresponding to each qdisc. That is fine currently, as there only ever is
one level of qdiscs to update: the direct children of ETS / PRIO. However
as deeper structures are made offloadable, ETS would need to update these
values for the complete subtree, and interim qdiscs would need to remember
to propagate the value.
Instead, reverse the responsibility: child qdiscs can ask their parent what
their TC and priomap are. ETS / PRIO know the answer right away, or there
are defaults for when the root qdisc does not assign them (e.g. when RED is
used as root qdisc). When RED and TBF become classful, they will simply
forward the request up to their parent.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As another qdisc is linked to the TBF, the latter should issue an event to
give drivers a chance to react to the grafting. In other qdiscs, this event
is called GRAFT, so follow suit with TBF as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maor Maor Gottlieb says:
========================
Use hash to select the affinity port in VF LAG
Current VF LAG architecture is based on QP association with a port.
QP must be created after LAG is enabled to allow association with non-native port.
VM Packets going on slow-path to eSwicth manager (SW path or hairpin) will be transmitted
through a different QP than the VM. This means that Different packets of the same flow might
egress from different physical ports.
This patch-set solves this issue by moving the port selection to be based on the hash function
defined by the bond.
When the device is moved to VF LAG mode, the driver creates TTC (traffic type classifier) flow
tables in order to classify the packet and steer it to the relevant hash function. Similar to what
is done in the mlx5 RSS implementation.
Each rule in the TTC table, forwards the packet to port selection flow table which has one hash
split flow group which contains two "catch all" flow table entries. Each entry point to the
relative uplink port. As shown below:
-------------------
| FT |
TTC rule -> | ----------- |
| FG| FTE --|-|-----> uplink of port #1
| | FTE --|-|-----> uplink of port #2
| ----------- |
-------------------
Hash split flow group is flow group that created as type of HASH_SPLIT and associated with match definer.
The match definer define the fields which included in the hash calculation.
The driver creates the match definer according to the xmit hash policy of the bond driver.
Patches overview:
========================
Minor E-Switch updates:
- Patch #12, dynamic allocation of dest array
- Patch #13, increase number of forward destinations to 32
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmFuOPIACgkQSD+KveBX
+j4Ejgf/ScZmLSMvPu8doQ+eLG6nSiA5EAXkJqx0dwZZzzB4hSJleYuTveab/rgA
HNhSZiVI8YXrscqvBAWNVAE8wQ0DFgYtDFs5UfUc/Pd+dZsqk7+ecHlo+kBCkYSn
3fNTKSkdzZsGz5hOu0eP3rteIvTf9JrtB07rfBLbma/nuTnSGxIFYQpDe7H52jW2
pov9LEonara9kjJ7BFtaupQMwCpVwYuPkMPTnt/qO1IOE18GHnK5SXgdMSlLBdjY
HKfBF6jXWooDlN9nAxvH+2RWsumng0pRyujw0uvHTQ6SDNoOKf1ucj8znOHCFC1h
sTfzAX6jUdrRtJ6hWLo+p9YlkLtjSw==
=TVAs
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-10-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
mlx5-updates-2021-10-18
Maor Maor Gottlieb says:
========================
Use hash to select the affinity port in VF LAG
Current VF LAG architecture is based on QP association with a port.
QP must be created after LAG is enabled to allow association with non-native port.
VM Packets going on slow-path to eSwicth manager (SW path or hairpin) will be transmitted
through a different QP than the VM. This means that Different packets of the same flow might
egress from different physical ports.
This patch-set solves this issue by moving the port selection to be based on the hash function
defined by the bond.
When the device is moved to VF LAG mode, the driver creates TTC (traffic type classifier) flow
tables in order to classify the packet and steer it to the relevant hash function. Similar to what
is done in the mlx5 RSS implementation.
Each rule in the TTC table, forwards the packet to port selection flow table which has one hash
split flow group which contains two "catch all" flow table entries. Each entry point to the
relative uplink port. As shown below:
-------------------
| FT |
TTC rule -> | ----------- |
| FG| FTE --|-|-----> uplink of port #1
| | FTE --|-|-----> uplink of port #2
| ----------- |
-------------------
Hash split flow group is flow group that created as type of HASH_SPLIT and associated with match definer.
The match definer define the fields which included in the hash calculation.
The driver creates the match definer according to the xmit hash policy of the bond driver.
Patches overview:
========================
Minor E-Switch updates:
- Patch #12, dynamic allocation of dest array
- Patch #13, increase number of forward destinations to 32
Signed-off-by: David S. Miller <davem@davemloft.net>
Mateusz Palczewski says:
====================
40GbE Intel Wired LAN Driver Updates 2021-10-18
Use single state machine for driver initialization
and for service initialized driver. The init state
machine implemented in init_task() is merged
into the watchdog_task(). The init_task() function
is removed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Increase supported number of forward destinations in the same rule, local
and remote, from 2 to 32.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use dynamic allocation for the dest array in preparation for
the next patch which increase MLX5_MAX_FLOW_FWD_VPORTS and
will cause stack allocation to be bigger than 1024 bytes.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use the steering based solution for select the affinity port
when the LAG mode is based on hash policy and the device support
in port selection flow table.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add create function, build the steering tables, TTC and definers
according to the LAG hash type.
The destroy function, destroys all the steering components.
The modify functions is used when the bond mapping changes and it
iterates over all the rules in the definers and modifies them to steer
the packet to the relevant active ports.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support to create inner and outer TTC tables for LAG port
selection. These tables are used to classify the packets in
order to select the related definer.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Every definer will consist of a flow table with a single hash group
with exactly two flow table entries, one for each device port.
The destination of these entries is the uplink vport according to the
port state and hash policy.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Set the related bits in the match definer mask according to the
TT mapping.
This mask will be used to create the match definers.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Generate a traffic type bitmap that will define which
steering objects we need to create for the steering
based LAG.
Bits in this bitmap are set according to the LAG hash type.
In addition, have a field that indicate if the lag is in encap
mode or not.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Downstream patches add another lag related file so it makes
sense to have all the lag files in a dedicated directory.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The uplink destination type should be used in rules to steer the
packet to the uplink when the device is in steering based LAG mode.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Introduce new APIs to create and destroy flow matcher
for given format id.
Flow match definer object is used for defining the fields and
mask used for the hash calculation. User should mask the desired
fields like done in the match criteria.
This object is assigned to flow group of type hash. In this flow
group type, packets lookup is done based on the hash result.
This patch also adds the required bits to create such flow group.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add new port selection flow steering namespace. Flow steering rules in
this namespaceare are used to determine the physical port for egress
packets.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add bitmasks to ttc_params to indicate if rule is valid or not.
It will allow to create TTC table with support only in part of the
traffic types.
In later patches which introduce the steering based LAG port selection,
TTC will be created with only part of the rules according to the hash
type.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Change the TCP common variable - "iscsi_ooo" to "ooo_opq".
This variable is common between all the TCP L5 protocols and not
specific to iSCSI.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Link: https://lore.kernel.org/r/20211015124118.29041-2-smalin@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e330fb1459 ("of: net: move of_net under net/") moves of_net.c
to ./net/core/, but misses to adjust the reference to this file in
MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:
warning: no file matches F: drivers/of/of_net.c
Adjust the file entry after this file movement.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211016055815.14397-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use single state machine for driver initialization and for service
initialized driver. The init state machine implemented in init_task()
is merged into the watchdog_task(). The init_task() function is
removed.
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This commit adds a new state, __IAVF_INIT_FAILED to the state machine.
From now on initialization functions report errors not by returning an
error value, but by changing the state to indicate that something went
wrong.
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Replace state changes of iavf state machine
with a method that also tracks the previous
state the machine was on.
This change is required for further work with
refactoring init and watchdog state machines.
Tracking of previous state would help us
recover iavf after failure has occurred.
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
mlx5_tout_ms() returns a u64, we can't directly divide it.
This is not a problem here, @timeout which is the value
that actually matters here is already a ulong, so this
implies storing return value of mlx5_tout_ms() on a ulong
should be fine.
This fixes:
ERROR: modpost: "__udivdi3" [drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko] undefined!
Fixes: 32def4120e ("net/mlx5: Read timeout values from DTOR")
Link: https://lore.kernel.org/r/20211018172608.1069754-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Everything except the first 32 bits was lost when the pause flags were
added. This makes the 50000baseCR2 mode flag (bit 34) not appear.
I have tested this with a 10G card (SFN5122F-R7) by modifying it to
return a non-legacy link mode (10000baseCR).
Signed-off-by: Erik Ekman <erik@kryo.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix delay settings applied to wrong cpu in parse_port_config. The delay
values is set to the wrong index as the cpu_port_index is incremented
too early. Start the cpu_port_index to -1 so the correct value is
applied to address also the case with invalid phy mode and not available
port.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS for net-next:
1) Add new run_estimation toggle to IPVS to stop the estimation_timer
logic, from Dust Li.
2) Relax superfluous dynset check on NFT_SET_TIMEOUT.
3) Add egress hook, from Lukas Wunner.
4) Nowadays, almost all hook functions in x_table land just call the hook
evaluation loop. Remove remaining hook wrappers from iptables and IPVS.
From Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski