When the target is in stop stage, iSER transport initiates RDMA disconnects.
The iSER initiator may wish to establish a new connection over the
still existing network portal. In this case iSER transport should not
accept and resume new RDMA connections. In order to learn that, iscsi_np
is added with enabled flag so the iSER transport can check when deciding
weather to accept and resume a new connection request.
The iscsi_np is enabled after successful transport setup, and disabled
before iscsi_np login threads are cleaned up.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
RDMA CM and iSCSI target flows are asynchronous and completely
uncorrelated. Relying on the fact that iscsi_accept_np will be called
after CM connection request event and will wait for it is a mistake.
When attempting to login to a few targets this flow is racy and
unpredictable, but for parallel login to dozens of targets will
race and hang every time.
The correct synchronizing mechanism in this case is pending on
a semaphore rather than a wait_for_event. We keep the pending
interruptible for iscsi_np cleanup stage.
(Squash patch to remove dead code into parent - nab)
Reported-by: Slava Shwartsman <valyushash@gmail.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Should be adding list_add_tail($new, $head) and not
the other way around.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
net: get rid of SET_ETHTOOL_OPS
Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone.
This does that.
Mostly done via coccinelle script:
@@
struct ethtool_ops *ops;
struct net_device *dev;
@@
- SET_ETHTOOL_OPS(dev, ops);
+ dev->ethtool_ops = ops;
Compile tested only, but I'd seriously wonder if this broke anything.
Suggested-by: Dave Miller <davem@davemloft.net>
Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SCSI target updates from Nicholas Bellinger:
"Here are the target pending updates for v3.15-rc1. Apologies in
advance for waiting until the second to last day of the merge window
to send these out.
The highlights this round include:
- iser-target support for T10 PI (DIF) offloads (Sagi + Or)
- Fix Task Aborted Status (TAS) handling in target-core (Alex Leung)
- Pass in transport supported PI at session initialization (Sagi + MKP + nab)
- Add WRITE_INSERT + READ_STRIP T10 PI support in target-core (nab + Sagi)
- Fix iscsi-target ERL=2 ASYNC_EVENT connection pointer bug (nab)
- Fix tcm_fc use-after-free of ft_tpg (Andy Grover)
- Use correct ib_sg_dma primitives in ib_isert (Mike Marciniszyn)
Also, note the virtio-scsi + vhost-scsi changes to expose T10 PI
metadata into KVM guest have been left-out for now, as there where a
few comments from MST + Paolo that where not able to be addressed in
time for v3.15. Please expect this feature for v3.16-rc1"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (43 commits)
ib_srpt: Use correct ib_sg_dma primitives
target/tcm_fc: Rename ft_tport_create to ft_tport_get
target/tcm_fc: Rename ft_{add,del}_lport to {add,del}_wwn
target/tcm_fc: Rename structs and list members for clarity
target/tcm_fc: Limit to 1 TPG per wwn
target/tcm_fc: Don't export ft_lport_list
target/tcm_fc: Fix use-after-free of ft_tpg
target: Add check to prevent Abort Task from aborting itself
target: Enable READ_STRIP emulation in target_complete_ok_work
target/sbc: Add sbc_dif_read_strip software emulation
target: Enable WRITE_INSERT emulation in target_execute_cmd
target/sbc: Add sbc_dif_generate software emulation
target/sbc: Only expose PI read_cap16 bits when supported by fabric
target/spc: Only expose PI mode page bits when supported by fabric
target/spc: Only expose PI inquiry bits when supported by fabric
target: Pass in transport supported PI at session initialization
target/iblock: Fix double bioset_integrity_free bug
Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlist
target/rd: T10-Dif: RAM disk is allocating more space than required.
iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug
...
The code was incorrectly using sg_dma_address() and
sg_dma_len() instead of ib_sg_dma_address() and
ib_sg_dma_len().
This prevents srpt from functioning with the
Intel HCA and indeed will corrupt memory
badly.
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: Vinod Kumar <vinod.kumar@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In order to support local WRITE_INSERT + READ_STRIP operations for
non PI enabled fabrics, the fabric driver needs to be able signal
what protection offload operations are supported.
This is done at session initialization time so the modes can be
signaled by individual se_wwn + se_portal_group endpoints, as well
as optionally across different transports on the same endpoint.
For iser-target, set TARGET_PROT_ALL if the underlying ib_device
has already signaled PI offload support, and allow this to be
exposed via a new iscsit_transport->iscsit_get_sup_prot_ops()
callback.
For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode
operation.
For all other drivers, set TARGET_PROT_NORMAL to disable fabric
level PI.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Fastreg is mandatory for signature, so if the
device doesn't support it we don't need to use it.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a bug where outstanding RDMA_READs with WRITE_PENDING
status require an extra target_put_sess_cmd() in isert_put_cmd() code
when called from isert_cq_tx_comp_err() + isert_cq_drain_comp_llist()
context during session shutdown.
The extra kref PUT is required so that transport_generic_free_cmd()
invokes the last target_put_sess_cmd() -> target_release_cmd_kref(),
which will complete(&se_cmd->cmd_wait_comp) the outstanding se_cmd
descriptor with WRITE_PENDING status, and awake the completion in
target_wait_for_sess_cmds() to invoke TFO->release_cmd().
The bug was manifesting itself in target_wait_for_sess_cmds() where
a se_cmd descriptor with WRITE_PENDING status would end up sleeping
indefinately.
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Now that TASK_ABORTED status is not generated for all cases by
TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is
necessary in order to give fabric drivers a chance to unmap
hardware / software resources before the se_cmd descriptor is
released via the normal TFO->release_cmd() codepath.
This patch adds TFO->aborted_task() in core_tmr_abort_task()
in place of the original transport_send_task_abort(), and
also updates all fabric drivers to implement this caller.
The fabric drivers that include changes to perform cleanup
via ->aborted_task() are:
- iscsi-target
- iser-target
- srpt
- tcm_qla2xxx
The fabric drivers that currently set ->aborted_task() to
NOPs are:
- loopback
- tcm_fc
- usb-gadget
- sbp-target
- vhost-scsi
For the latter five, there appears to be no additional cleanup
required before invoking TFO->release_cmd() to release the
se_cmd descriptor.
v2 changes:
- Move ->aborted_task() call into transport_cmd_finish_abort (Alex)
Cc: Alex Leung <amleung21@yahoo.com>
Cc: Mark Rustad <mark.d.rustad@intel.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Vu Pham <vu@mellanox.com>
Cc: Chris Boot <bootc@bootc.net>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Cc: Saurav Kashyap <saurav.kashyap@qlogic.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch changes isert_conn_create_fastreg_pool() to follow
logic in iscsi_target_locate_portal() for determining how many
FRMR descriptors to allocate based upon the number of possible
per-session command slots that are available.
This addresses an OOPs in isert_reg_rdma() where due to the
use of ISCSI_DEF_XMIT_CMDS_MAX could end up returning a bogus
fast_reg_descriptor when the number of active tags exceeded
the original hardcoded max.
Note this also includes moving isert_conn_create_fastreg_pool()
from isert_connect_request() to isert_put_login_tx() before
posting the final Login Response PDU in order to determine the
se_nacl->queue_depth (eg: number of tags) per session the target
will be enforcing.
v2 changes:
- Move isert_conn->conn_fr_pool list_head init into
isert_conn_request()
v3 changes:
- Drop unnecessary list_empty() check in isert_reg_rdma()
(Sagi)
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If during data-transfer a data-integrity error was detected we
must fail the command with CHECK_CONDITION and not execute
the command.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Remove code duplication from RDMA_READ and RDMA_WRITE
completions that do basically the same check.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If protection is involved, iSER target must wait for
completion of RDMA_READ before sending SCSI response.
So we must consider that when calculating post_send_buf_count
additions, also when processing good/error completions.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
As REG_SIG_MR work request and it's LOCAL_INVALIDATE are
not accounted in post_send_buf_count we must color these
with ISER_FASTREG_LI_WRID in order to process their error
completions when the QP flushes.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In case the Target core passed transport T10 protection
operation:
1. Register data buffer (data memory region)
2. Register protection buffer if exsists (prot memory region)
3. Register signature region (signature memory region)
- use work request IB_WR_REG_SIG_MR
4. Execute RDMA
5. Upon RDMA completion check the signature status
- if succeeded send good SCSI response
- if failed send SCSI bad response with appropriate sense buffer
(Fix up compile error in isert_reg_sig_mr, and fix up incorrect
se_cmd->prot_type -> TARGET_PROT_NORMAL comparision - nab)
(Fix failed sector assignment in isert_completion_rdma_* - Sagi + nab)
(Fix enum assignements for protection type - Sagi)
(Fix devision on 32-bit in isert_completion_rdma_* - Sagi + Fengguang)
(Fix context change for v3.14-rc6 code - nab)
(Fix iscsit_build_rsp_pdu inc_statsn flag usage - nab)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In case of protected transactions, we will need to check the
protection status of the transaction before sending SCSI response.
So be ready for RDMA_WRITE completions. currently we don't ask
for these completions, but for T10-PI we will.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Introduce pi_context to hold relevant RDMA protection resources.
We eliminate data_key_valid boolean and replace it with indicators
container to indicate:
- Is the descriptor protected (registered via signature MR)
- Is the data_mr key valid (can spare LOCAL_INV WR)
- Is the prot_mr key valid (can spare LOCAL_INV WR)
- Is the sig_mr key valid (can spare LOCAL_INV WR)
Upon connection establishment check if network portal is T10-PI
enabled and allocate T10-PI resources if necessary, allocate
signature enabled memory regions and mark connection queue-pair
as signature enabled.
(Fix context change for v3.14-rc6 code - nab)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
export map/unmap data buffer to a routine that may
be used in various places in the code and keep the
mapping data in a designated descriptor. Also, let
isert_fast_reg_mr to decide weather to use global
MR or do fast registration.
This commit does not change any functionality.
(Fix context change for v3.14-rc6 code - nab)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
- The biggest change is core API extensions and mlx5 low-level driver
support for handling DIF/DIX-style protection information, and the
addition of PI support to the iSER initiator. Target support will be
arriving shortly through the SCSI target tree.
- A nice simplification to the "umem" memory pinning library now that
we have chained sg lists. Kudos to Yishai Hadas for realizing our
code didn't have to be so crazy.
- Another nice simplification to the sg wrappers used by qib, ipath and
ehca to handle their mapping of memory to adapter.
- The usual batch of fixes to bugs found by static checkers etc. from
intrepid people like Dan Carpenter and Yann Droneaud.
- A large batch of cxgb4, ocrdma, qib driver updates.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ww6H
-----END PGP SIGNATURE-----
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull infiniband updates from Roland Dreier:
"Main batch of InfiniBand/RDMA changes for 3.15:
- The biggest change is core API extensions and mlx5 low-level driver
support for handling DIF/DIX-style protection information, and the
addition of PI support to the iSER initiator. Target support will
be arriving shortly through the SCSI target tree.
- A nice simplification to the "umem" memory pinning library now that
we have chained sg lists. Kudos to Yishai Hadas for realizing our
code didn't have to be so crazy.
- Another nice simplification to the sg wrappers used by qib, ipath
and ehca to handle their mapping of memory to adapter.
- The usual batch of fixes to bugs found by static checkers etc.
from intrepid people like Dan Carpenter and Yann Droneaud.
- A large batch of cxgb4, ocrdma, qib driver updates"
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (102 commits)
RDMA/ocrdma: Unregister inet notifier when unloading ocrdma
RDMA/ocrdma: Fix warnings about pointer <-> integer casts
RDMA/ocrdma: Code clean-up
RDMA/ocrdma: Display FW version
RDMA/ocrdma: Query controller information
RDMA/ocrdma: Support non-embedded mailbox commands
RDMA/ocrdma: Handle CQ overrun error
RDMA/ocrdma: Display proper value for max_mw
RDMA/ocrdma: Use non-zero tag in SRQ posting
RDMA/ocrdma: Memory leak fix in ocrdma_dereg_mr()
RDMA/ocrdma: Increment abi version count
RDMA/ocrdma: Update version string
be2net: Add abi version between be2net and ocrdma
RDMA/ocrdma: ABI versioning between ocrdma and be2net
RDMA/ocrdma: Allow DPP QP creation
RDMA/ocrdma: Read ASIC_ID register to select asic_gen
RDMA/ocrdma: SQ and RQ doorbell offset clean up
RDMA/ocrdma: EQ full catastrophe avoidance
RDMA/cxgb4: Disable DSGL use by default
RDMA/cxgb4: rx_data() needs to hold the ep mutex
...
Update Mellanox copyrights for 2014 on the iser initiator driver.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Add an iser info print with the local/remote QP information carried
out when the connection is established. While here, fix a little
leftover from the T10 work and set a debug print to be carried in
debug and not info level.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The iscsi stack has existing mechanisms to link back and forth between
the iscsi connection and the iscsi transport (e.g iser/tcp) connection.
This is done through a dd_data pointer field in struct iscsi_conn
which can be set to point to the transport connection, etc.
The iscsi_iser_conn structure was used to get this linking done in
another way, which is uneeded and adds extra complication to the iser
code, so we just remove it.
Signed-off-by: Ariel Nahum <arieln@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The iser disconnection flow isn't done before all the inflight
recv/send buffers posted to the QP are either flushed or normally
completed to the CQ that serves this connection. The condition check
is done in iser_handle_comp_error().
Currently, it's possible for the send buffer completion that makes the
posted send buffers counter reach zero to be polled in the drain tx
call, which is after the rx cq is fully drained. Since this
completion might be not an error one (for example, it might be a
completion of the logout request iSCSI PDU) we will skip
iser_handle_comp_error(). So the connection will never terminate from
the iscsi stack point of view, and we hang.
To resolve this race, do the draining of the tx cq before the loop on
the rx cq.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix pr_err (printk) format warning:
drivers/infiniband/ulp/iser/iser_verbs.c:1181:4: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'sector_t' [-Wformat]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Avoid that srp_terminate_io() can access req->scmnd after it has been
cleared by the I/O completion code. Do this by protecting req->scmnd
accesses from srp_terminate_io() via locking
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
If a cable is pulled while srp_connect_target() is in progress
that can result in that function never to return. That makes the
process, e.g. srp_daemon, that invoked this function unkillable.
Avoid this by letting srp_connect_target() finish if the event
IB_CM_TIMEWAIT_EXIT is received. This patch fixes a hang with the
following call trace:
[<ffffffff814eae85>] schedule_timeout+0x215/0x2e0
[<ffffffff814eab03>] wait_for_common+0x123/0x180
[<ffffffff814eac1d>] wait_for_completion+0x1d/0x20
[<ffffffffa03b398c>] srp_connect_target+0x1dc/0x410 [ib_srp]
[<ffffffffa03b5809>] srp_create_target+0xba9/0xe70 [ib_srp]
[<ffffffff8133e590>] dev_attr_store+0x20/0x30
[<ffffffff811eb8f5>] sysfs_write_file+0xe5/0x170
[<ffffffff811767c8>] vfs_write+0xb8/0x1a0
[<ffffffff811770c1>] sys_write+0x51/0x90
[<ffffffff8100b072>] system_call_fastpath+0x16/0x1b
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Avoid that stopping srp_daemon takes unusually long due to a cable
pull by making writing into the "add_target" sysfs attribute
interruptible.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The connection uniqueness check is performed before a new connection
is added to the target list. This patch protects both actions by a
mutex such that simultaneous writes from two different threads into the
"add_target" variable do not result in duplicate connections.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Log sgid and dgid when reporting that a login has been rejected or when
a host has been added. This makes it easy to figure out which initiator
and target ports these messages apply to.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
After allocating a scsi_host we set protection types and guard type
supported.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Once the iSCSI transaction is completed we must implement
check_protection in order to notify on DIF errors that may have
occured.
The routine boils down to calling ib_check_mr_status to get the
signature status of the transaction.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Add logic to initialize protection information entities. Upon each
iSCSI task, we keep the scsi_cmnd in order to query the scsi
protection operations and reference to protection buffers.
Modify iser_fast_reg_mr to receive indication whether it is
registering the data or protection buffers.
In addition introduce iser_reg_sig_mr which performs fast registration
work-request for a signature enabled memory region
(IB_WR_REG_SIG_MR). In this routine we set all the protection
relevants for the device to offload protection data-transfer and
verification.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
During connection establishment we also initialize T10-PI resources
(QP, PI contexts) in order to support SCSI's protection operations.
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Use modparams to activate protection information support.
pi_enable bool: Based on this parameter iSER will know if it should
support T10-PI. We don't want to do this by default as it requires to
allocate and initialize extra resources. In case pi_enable=N, iSER
won't publish to SCSI midlayer any DIF capabilities.
pi_guard int: Based on this parameter iSER will publish DIX guard type
support to SCSI midlayer. 0 means CRC is allowed to be passed in DIX
buffers, 1 (or non-zero) means IP-CSUM is allowed to be passed in DIX
buffers. Note that over the wire, only CRC is allowed.
In the next phase, it is worth considering passing these parameters
from iscsid via nlmsg. This will allow these parameters to be
connection based rather than global.
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Unaligned SG-lists may also happen for protection information.
Generalize bounce buffer routine to handle any iser_data_buf which may
be data and/or protection.
This patch does not change any functionality.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This routines operates on data buffers and may also work with
protection infomation buffers. So we generalize them to handle an
iser_data_buf which can be the command data or command protection
information.
This patch does not change any functionality.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
In T10-PI support we will have memory keys for protection buffers and
signature transactions. We prefer to compact indicators rather than
keeping multiple bools.
This commit does not change any functionality.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
For T10-PI offload support, we will need to know the device signature
offload capability upon every connection establishment.
This patch does not change any functionality.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
fastreg descriptor will include protection information context. In
order to place the logic in one place we introduce iser_create_fr_desc
function.
This patch does not change any functionality.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This is a preparation step for T10-PI offload support. We prefer to
push the desicion of which mkey to use (global or fastreg) to
iser_fast_reg_mr. We choose to do this since in T10-PI we may need to
register for protection buffers and in this case we wish to simplify
iser_fast_reg_mr instead of repeating the logic of which key to use.
This patch does not change any functionality.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
FRWR stands for "fast registration work request". We want to avoid
calling the fastreg pool with that name, instead we name it fastreg
which stands for "fast registration".
This pool will include more elements in the future, so it is a good
idea to generalize the name.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
In case iSER uses fast registration method, it should not request for
successful completions on fast registration nor local invalidate
requests. We color wr_id with ISER_FRWR_LI_WRID in order to correctly
consume error completions.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Pull SCSI target fixes from Nicholas Bellinger:
"This series addresses a number of outstanding issues wrt to active I/O
shutdown using iser-target. This includes:
- Fix a long standing tpg_state bug where a tpg could be referenced
during explicit shutdown (v3.1+ stable)
- Use list_del_init for iscsi_cmd->i_conn_node so list_empty checks
work as expected (v3.10+ stable)
- Fix a isert_conn->state related hung task bug + ensure outstanding
I/O completes during session shutdown. (v3.10+ stable)
- Fix isert_conn->post_send_buf_count accounting for RDMA READ/WRITEs
(v3.10+ stable)
- Ignore FRWR completions during active I/O shutdown (v3.12+ stable)
- Fix command leakage for interrupt coalescing during active I/O
shutdown (v3.13+ stable)
Also included is another DIF emulation fix from Sagi specific to
v3.14-rc code"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
Target/sbc: Fix sbc_copy_prot for offset scatters
iser-target: Fix command leak for tx_desc->comp_llnode_batch
iser-target: Ignore completions for FRWRs in isert_cq_tx_work
iser-target: Fix post_send_buf_count for RDMA READ/WRITE
iscsi/iser-target: Fix isert_conn->state hung shutdown issues
iscsi/iser-target: Use list_del_init for ->i_conn_node
iscsi-target: Fix iscsit_get_tpg_from_np tpg_state bug
This patch addresses a number of active I/O shutdown issues
related to isert_cmd descriptors being leaked that are part
of a completion interrupt coalescing batch.
This includes adding logic in isert_cq_tx_comp_err() to
drain any associated tx_desc->comp_llnode_batch, as well
as isert_cq_drain_comp_llist() to drain any associated
isert_conn->conn_comp_llist.
Also, set tx_desc->llnode_active in isert_init_send_wr()
in order to determine when work requests need to be skipped
in isert_cq_tx_work() exception path code.
Finally, update isert_init_send_wr() to only allow interrupt
coalescing when ISER_CONN_UP.
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.13+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch changes IB_WR_FAST_REG_MR + IB_WR_LOCAL_INV related
work requests to include a ISER_FRWR_LI_WRID value in order to
signal isert_cq_tx_work() that these requests should be ignored.
This is necessary because even though IB_SEND_SIGNALED is not
set for either work request, during a QP failure event the work
requests will be returned with exception status from the TX
completion queue.
v2 changes:
- Rename ISER_FRWR_LI_WRID -> ISER_FASTREG_LI_WRID (Sagi)
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes the incorrect setting of ->post_send_buf_count
related to RDMA WRITEs + READs where isert_rdma_rw->send_wr_num
was not being taken into account.
This includes incrementing ->post_send_buf_count within
isert_put_datain() + isert_get_dataout(), decrementing within
__isert_send_completion() + isert_response_completion(), and
clearing wr->send_wr_num within isert_completion_rdma_read()
This is necessary because even though IB_SEND_SIGNALED is
not set for RDMA WRITEs + READs, during a QP failure event
the work requests will be returned with exception status
from the TX completion queue.
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch addresses a couple of different hug shutdown issues
related to wait_event() + isert_conn->state. First, it changes
isert_conn->conn_wait + isert_conn->conn_wait_comp_err from
waitqueues to completions, and sets ISER_CONN_TERMINATING from
within isert_disconnect_work().
Second, it splits isert_free_conn() into isert_wait_conn() that
is called earlier in iscsit_close_connection() to ensure that
all outstanding commands have completed before continuing.
Finally, it breaks isert_cq_comp_err() into seperate TX / RX
related code, and adds logic in isert_cq_rx_comp_err() to wait
for outstanding commands to complete before setting ISER_CONN_DOWN
and calling complete(&isert_conn->conn_wait_comp_err).
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
There are a handful of uses of list_empty() for cmd->i_conn_node
within iser-target code that expect to return false once a cmd
has been removed from the per connect list.
This patch changes all uses of list_del -> list_del_init in order
to ensure that list_empty() returns false as expected.
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Pull SCSI target fixes from Nicholas Bellinger:
"Mostly minor fixes this time to v3.14-rc1 related changes. Also
included is one fix for a free after use regression in persistent
reservations UNREGISTER logic that is CC'ed to >= v3.11.y stable"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
Target/sbc: Fix protection copy routine
IB/srpt: replace strict_strtoul() with kstrtoul()
target: Simplify command completion by removing CMD_T_FAILED flag
iser-target: Fix leak on failure in isert_conn_create_fastreg_pool
iscsi-target: Fix SNACK Type 1 + BegRun=0 handling
target: Fix missing length check in spc_emulate_evpd_83()
qla2xxx: Remove last vestiges of qla_tgt_cmd.cmd_list
target: Fix 32-bit + CONFIG_LBDAF=n link error w/ sector_div
target: Fix free-after-use regression in PR unregister
We use "tx_desc" again after we free it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix a possible NULL pointer dereference in disconnection flow. This
can happen if the target disconnected/rejected the connection request,
e.g before the binding stage between iscsi connection to the transport
connection.
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Pull SCSI target updates from Nicholas Bellinger:
"The highlights this round include:
- add support for SCSI Referrals (Hannes)
- add support for T10 DIF into target core (nab + mkp)
- add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab)
- add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab)
- prep changes to iser-target for >= v3.15 T10 DIF support (Sagi)
- add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn)
- allow percpu_ida_alloc() to receive task state bitmask (Kent)
- fix >= v3.12 iscsi-target session reset hung task regression (nab)
- fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab)
- fix a long-standing network portal creation race (Andy)"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits)
target: Fix percpu_ref_put race in transport_lun_remove_cmd
target/iscsi: Fix network portal creation race
target: Report bad sector in sense data for DIF errors
iscsi-target: Convert gfp_t parameter to task state bitmask
iscsi-target: Fix connection reset hang with percpu_ida_alloc
percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask
iscsi-target: Pre-allocate more tags to avoid ack starvation
qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport
qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO.
qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine
IB/isert: Move fastreg descriptor creation to a function
IB/isert: Avoid frwr notation, user fastreg
IB/isert: seperate connection protection domains and dma MRs
tcm_loop: Enable DIF/DIX modes in SCSI host LLD
target/rd: Add DIF protection into rd_execute_rw
target/rd: Add support for protection SGL setup + release
target/rd: Refactor rd_build_device_space + rd_release_device_space
target/file: Add DIF protection support to fd_execute_rw
target/file: Add DIF protection init/format support
...
This patch propigates the use of task state bitmask now used by
percpu_ida_alloc() up the iscsi-target callchain, replacing the
use of GFP_ATOMIC for TASK_RUNNING, and GFP_KERNEL for
TASK_INTERRUPTIBLE.
Also, drop the unnecessary gfp_t parameter to isert_allocate_cmd(),
and just pass TASK_INTERRUPTIBLE into iscsit_allocate_cmd().
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
After booting without a working link, "ip link" shows:
5: mlx4_ib1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 2044 qdisc pfifo_fast
state DOWN qlen 256
...
7: mlx4_ib1.8003@mlx4_ib1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 2044 qdisc
pfifo_fast state DOWN qlen 256
...
Then after connecting and disconnecting the link, which should result
in exactly the same state as before, it shows:
5: mlx4_ib1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 2044 qdisc pfifo_fast
state DOWN qlen 256
...
7: mlx4_ib1.8003@mlx4_ib1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 2044 qdisc
pfifo_fast state LOWERLAYERDOWN qlen 256
...
Notice the (now correct) LOWERLAYERDOWN operstate shown for the
mlx4_ib1.8003 interface. Ideally the identical state would be shown
right after boot.
The problem is related to the calling of netif_carrier_off() in
network drivers. For a long time it was known that doing
netif_carrier_off() before registering the netdevice would result in
the interface's operstate being shown as UNKNOWN if the device was
brought up without a working link. This problem was fixed in commit
8f4cccbbd9 ('net: Set device operstate at registration time'), but
still there remains the minor inconsistency demonstrated above.
This patch fixes it by moving ipoib's call to netif_carrier_off() into
the .ndo_open method, which is where network drivers ordinarily do it.
With the patch when doing the same test as above, the operstate of
mlx4_ib1.8003 is shown as LOWERLAYERDOWN right after boot.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The rport timers must be stopped before the SRP initiator destroys the
resources associated with the SCSI host. This is necessary because
otherwise the callback functions invoked from the SRP transport layer
could trigger a use-after-free. Stopping the rport timers before
invoking scsi_remove_host() can trigger long delays in the SCSI error
handler if a transport layer failure occurs while scsi_remove_host()
is in progress. Hence move the code for stopping the rport timers from
srp_rport_release() into a new function and invoke that function after
scsi_remove_host() has finished. This patch fixes the following
sporadic kernel crash:
kernel BUG at include/asm-generic/dma-mapping-common.h:64!
invalid opcode: 0000 [#1] SMP
RIP: 0010:[<ffffffffa03b20b1>] [<ffffffffa03b20b1>] srp_unmap_data+0x121/0x130 [ib_srp]
Call Trace:
[<ffffffffa03b20fc>] srp_free_req+0x3c/0x80 [ib_srp]
[<ffffffffa03b2188>] srp_finish_req+0x48/0x70 [ib_srp]
[<ffffffffa03b21fb>] srp_terminate_io+0x4b/0x60 [ib_srp]
[<ffffffffa03a6fb5>] __rport_fail_io_fast+0x75/0x80 [scsi_transport_srp]
[<ffffffffa03a7438>] rport_fast_io_fail_timedout+0x88/0xc0 [scsi_transport_srp]
[<ffffffff8108b370>] worker_thread+0x170/0x2a0
[<ffffffff81090876>] kthread+0x96/0xa0
[<ffffffff8100c0ca>] child_rip+0xa/0x20
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This routine may help for protection registration as well.
This patch does not change any functionality.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This routine may be called both by fast registration
descriptors for data and for integrity buffers.
This patch does not change any functionality.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Use fast registration lingo. fast registration will
also incorporate signature/DIF registration.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
It is more correct to seperate connections protection domains
and dma_mr handles. protection information support requires to
do so.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
When creating an IPoIB UD QP, provide a hint to the low level driver
that the QP should support flow-steering. This means that privileged
user space applications can steer TCP/IP IPoIB traffic from the
network stack, in a similar manner done with Ethernet RAW_PACKET QPs.
The hint is provided through new QP creation flag called NETIF_QP.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
When we create a new infiniband link with uninfiniband device, e.g. `ip link
add link em1 type ipoib pkey 0x8001`. We will get a NULL pointer dereference
cause other dev like Ethernet don't have struct ib_device.
The code path is:
rtnl_newlink
|-- ipoib_new_child_link
|-- __ipoib_vlan_add
|-- ipoib_set_dev_features
|-- ib_query_device
Fix this bug by make sure the src net is infiniband when create new link.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves INIT_WORK setup for cq_desc->cq_[rx,tx]_work into
isert_create_device_ib_res(), instead of being done each callback
invocation in isert_cq_[rx,tx]_callback().
This also fixes a 'INFO: trying to register non-static key' warning
when cancel_work_sync() is called before INIT_WORK has setup the
struct work_struct.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Cc: <stable@vger.kernel.org> #3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Pull SCSI target updates from Nicholas Bellinger:
"Things have been quiet this round with mostly bugfixes, percpu
conversions, and other minor iscsi-target conformance testing changes.
The highlights include:
- Add demo_mode_discovery attribute for iscsi-target (Thomas)
- Convert tcm_fc(FCoE) to use percpu-ida pre-allocation
- Add send completion interrupt coalescing for ib_isert
- Convert target-core to use percpu-refcounting for se_lun
- Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn
- tcm_loop updates (Hannes)
- target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes)
v3.14 is currently shaping to be a busy development cycle in target
land, with initial support for T10 Referrals and T10 DIF currently on
the roadmap"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
iscsi-target: chap auth shouldn't match username with trailing garbage
iscsi-target: fix extract_param to handle buffer length corner case
iscsi-target: Expose default_erl as TPG attribute
target_core_configfs: split up ALUA supported states
target_core_alua: Make supported states configurable
target_core_alua: Store supported ALUA states
target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
target_core_alua: spellcheck
target core: rename (ex,im)plict -> (ex,im)plicit
percpu-refcount: Add percpu-refcount.o to obj-y
iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
iscsi-target: Convert iscsi_session statistics to atomic_long_t
target: Convert se_device statistics to atomic_long_t
target: Fix delayed Task Aborted Status (TAS) handling bug
iscsi-target: Reject unsupported multi PDU text command sequence
ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call
iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn
target: Core does not need blkdev.h
target: Pass through I/O topology for block backstores
iser-target: Avoid using FRMR for single dma entry requests
...
- Re-enable flow steering verbs with new improved userspace ABI
- Fixes for slow connection due to GID lookup scalability
- IPoIB fixes
- Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib
- Further improvements to SRP error handling
- Add new transport type for Cisco usNIC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=xxC+
-----END PGP SIGNATURE-----
Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
Pull infiniband/rdma updates from Roland Dreier:
- Re-enable flow steering verbs with new improved userspace ABI
- Fixes for slow connection due to GID lookup scalability
- IPoIB fixes
- Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib
- Further improvements to SRP error handling
- Add new transport type for Cisco usNIC
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits)
IB/core: Re-enable create_flow/destroy_flow uverbs
IB/core: extended command: an improved infrastructure for uverbs commands
IB/core: Remove ib_uverbs_flow_spec structure from userspace
IB/core: Use a common header for uverbs flow_specs
IB/core: Make uverbs flow structure use names like verbs ones
IB/core: Rename 'flow' structs to match other uverbs structs
IB/core: clarify overflow/underflow checks on ib_create/destroy_flow
IB/ucma: Convert use of typedef ctl_table to struct ctl_table
IB/cm: Convert to using idr_alloc_cyclic()
IB/mlx5: Fix page shift in create CQ for userspace
IB/mlx4: Fix device max capabilities check
IB/mlx5: Fix list_del of empty list
IB/mlx5: Remove dead code
IB/core: Encorce MR access rights rules on kernel consumers
IB/mlx4: Fix endless loop in resize CQ
RDMA/cma: Remove unused argument and minor dead code
RDMA/ucma: Discard events for IDs not yet claimed by user space
IB/core: Add Cisco usNIC rdma node and transport types
RDMA/nes: Remove self-assignment from nes_query_qp()
IB/srp: Report receive errors correctly
...
Pull trivial tree updates from Jiri Kosina:
"Usual earth-shaking, news-breaking, rocket science pile from
trivial.git"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
doc: add missing files to timers/00-INDEX
timekeeping: Fix some trivial typos in comments
mm: Fix some trivial typos in comments
irq: Fix some trivial typos in comments
NUMA: fix typos in Kconfig help text
mm: update 00-INDEX
doc: Documentation/DMA-attributes.txt fix typo
DRM: comment: `halve' -> `half'
Docs: Kconfig: `devlopers' -> `developers'
doc: typo on word accounting in kprobes.c in mutliple architectures
treewide: fix "usefull" typo
treewide: fix "distingush" typo
mm/Kconfig: Grammar s/an/a/
kexec: Typo s/the/then/
Documentation/kvm: Update cpuid documentation for steal time and pv eoi
treewide: Fix common typo in "identify"
__page_to_pfn: Fix typo in comment
Correct some typos for word frequency
clk: fixed-factor: Fix a trivial typo
...
This patch avoids a duplicate iscsit_increment_maxcmdsn() call for
ISER_IB_RDMA_WRITE within isert_map_rdma() + isert_reg_rdma_frwr(),
which will already be occuring once during isert_put_datain() ->
iscsit_build_rsp_pdu() operation.
It also removes the local conn->stat_sn assignment + increment,
and changes the third parameter to iscsit_build_rsp_pdu() to
signal this should be done by iscsi_target_mode code.
Tested-by: Moussa Ba <moussaba@micron.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch changes isert_reg_rdma_frwr() to not use FRMR for single
dma entry requests from small I/Os, in order to avoid the associated
memory registration overhead.
Using DMA MR is sufficient here for the single dma entry requests,
and addresses a >= v3.12 performance regression.
Signed-off-by: Vu Pham <vu@mellanox.com>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The IB spec does not guarantee that the opcode is available in error
completions. Hence do not rely on it. See also commit 948d1e889e
("IB/srp: Introduce srp_handle_qp_err()").
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: <stable@vger.kernel.org> # v3.8
Signed-off-by: Roland Dreier <roland@purestorage.com>
If SCSI commands are submitted with a SCSI request timeout that is
lower than the the IB RC timeout, it can happen that the SCSI error
handler has already started device recovery before transport layer
error handling starts. So it can happen that the SCSI error handler
tries to abort a SCSI command after it has been reset by
srp_rport_reconnect().
Tell the SCSI error handler that such commands have finished and that
it is not necessary to continue its recovery strategy for commands
that have been reset by srp_rport_reconnect().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Remove an SRP target from the SRP target list before invoking the last
scsi_host_put() call. This change is necessary because that last put
frees the memory that holds the srp_target_port structure.
This patch prevents the following kernel oops:
RIP: 0010:[<ffffffff810b00d0>] __lock_acquire+0x500/0x1570
Call Trace:
[<ffffffff810b11e4>] lock_acquire+0xa4/0x120
[<ffffffff81531206>] _spin_lock+0x36/0x70
[<ffffffffa01b6d8f>] srp_remove_work+0xef/0x180 [ib_srp]
[<ffffffff8109125c>] worker_thread+0x21c/0x3d0
[<ffffffff81096e86>] kthread+0x96/0xa0
[<ffffffff8100c20a>] child_rip+0xa/0x20
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
[ bvanassche - Modified path description and CC'ed stable. ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Currently, it's not possible to change queue depth for a device behind
SRP host. Sometimes, we need to adjust queue_depth for performance
reason (eg storage busy, we need lower queue_depth to avoid running
into SCSI error handler), so this patch add support for SRP driver.
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Certain storage configurations, e.g. a sufficiently large array of
hard disks in a RAID configuration, need a queue depth above 64 to
achieve optimal performance. Hence make the queue depth configurable.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Tested-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Vu Pham <vu@mellanox.com>
Cc: Sebastian Riemer <sebastian.riemer@profitbricks.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
On an initiator system with multiple IB ports it is not yet possible
to figure out what the originating port of an SRP connection is. Hence
make the source GID available in sysfs.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
After a transport layer occurred, periodically try to reconnect
to the target until the dev_loss timer expires. Protect the
callback functions that can be invoked from inside the SCSI EH
against concurrent invocation with srp_reconnect_rport() via the
rport mutex. Change the default dev_loss_tmo from 60s into 600s
to give the reconnect mechanism a chance to kick in.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Add support for periodically reconnecting to an SRP target until
the dev_loss timer expires. After the tenth reconnection attempt,
gradually slow down subsequent reconnect attempts.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Start the reconnect timer, fast_io_fail timer and dev_loss timers if a
transport layer error occurs.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Enable fast_io_fail_tmo and dev_loss_tmo functionality for the IB SRP
initiator. Add kernel module parameters that allow to specify default
values for these parameters.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Keep the rport data structure around after srp_remove_host() has
finished until cleanup of the IB transport layer has finished
completely. This is necessary because later patches use the rport
pointer inside the queuecommand callback. Without this patch
accessing the rport from inside a queuecommand callback is racy
because srp_remove_host() must be invoked before scsi_remove_host()
and because the queuecommand callback could get invoked after
srp_remove_host() has finished. In other words, without this patch
the queuecommand callback can get invoked after the rport data
structure has been freed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Allow the InfiniBand RC retry count to be configured by the user as an
option in the target login string. Reducing this retry count allows to
reduce the path failover time.
Signed-off-by: Vu Pham <vu@mellanox.com>
[ bvanassche: Rewrote patch description / changed default retry count ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Since commit 82dc3c63c6 ("net: introduce NAPI_POLL_WEIGHT")
netif_napi_add() produces an error message if a NAPI poll weight
greater than 64 is requested.
Use the standard NAPI weight.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The driver starts the mcast_join task whenever the netdev interface is
UP without relation to the underlying IB port state.
Until the port state is ACTIVE all the join requests are irrelevant,
and the IB core returns -EINVAL. So the user will see errors such as:
"multicast join failed for ff12:401b:... , status -22".
Instead, have ipoib_mcast_join_task() return when the port is not active.
It will be called again when the port state is changed and the
low-level driver triggers the IB_EVENT_PORT_ACTIVE event or the
IB_EVENT_CLIENT_REREGISTER event.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The path_rec_completion() callback may be invoked asynchronously even
at the middle of "driver uninit" process. This can lead to scheduling
a task that tries to touch members of the priv object that are no
longer valid. For example the function cm_create_tx_qp can attempt to
create qp with no valid priv->pd object.
The following crash is one of the results:
RIP: 0010:[<ffffffffa021bb47>] [<ffffffffa021bb47>] ipoib_cm_create_tx_qp+0x57/0x90 [ib_ipoib]
Process ipoib (pid: 5916, threadinfo ffff8803786e4000, task ffff8804150e1500)
Stack:
Call Trace:
[<ffffffff81309ef0>] ? get_random_bytes+0x20/0x30
[<ffffffffa021be2a>] ipoib_cm_tx_init+0xca/0x340 [ib_ipoib]
[<ffffffffa021f765>] ipoib_cm_tx_start+0x215/0x3f0 [ib_ipoib]
[<ffffffffa021f550>] ? ipoib_cm_tx_start+0x0/0x3f0 [ib_ipoib]
[<ffffffff8108b2b0>] worker_thread+0x170/0x2a0
[<ffffffff81090bf0>] ? autoremove_wake_function+0x0/0x40
[<ffffffff8108b140>] ? worker_thread+0x0/0x2a0
[<ffffffff81090886>] kthread+0x96/0xa0
[<ffffffff8100c14a>] child_rip+0xa/0x20
[<ffffffff810907f0>] ? kthread+0x0/0xa0
[<ffffffff8100c140>] ? child_rip+0x0/0x20
Fix that by flushing all pending path queries at this point.
Signed-off-by: Alex Markuze <markuze@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The driver should avoid calling ib_sa_free_multicast on the mcast->mc
object until it finishes its initialization state. Otherwise we can
crash when ipoib_mcast_dev_flush() attempts to use the uninitialized
multicast object.
Instead, only call wait_for_completion() for multicast entries that
started the join process, meaning that ib_sa_join_multicast() finished.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The driver should not flush the whole workqueue when only one work (the
pkey poll one) needs to be cancelled. Use cancel_delayed_work_sync()
instead.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
When ipoib interface is going down it takes all of its children with
it, under mutex.
For each child, dev_change_flags() is called. That function calls
ipoib_stop() via the ndo, and causes flush of the workqueue.
Sometimes in the workqueue an __ipoib_dev_flush work() is waiting and
when invoked tries to get the same mutex, which leads to a deadlock,
as seen below.
The solution is to switch to rw-sem instead of mutex.
The deadlock:
[11028.165303] [<ffffffff812b0977>] ? vgacon_scroll+0x107/0x2e0
[11028.171844] [<ffffffff814eaac5>] schedule_timeout+0x215/0x2e0
[11028.178465] [<ffffffff8105a5c3>] ? perf_event_task_sched_out+0x33/0x80
[11028.185962] [<ffffffff814ea743>] wait_for_common+0x123/0x180
[11028.192491] [<ffffffff8105fa40>] ? default_wake_function+0x0/0x20
[11028.199504] [<ffffffff814ea85d>] wait_for_completion+0x1d/0x20
[11028.206224] [<ffffffff8108b4f1>] flush_cpu_workqueue+0x61/0x90
[11028.212948] [<ffffffff8108b5a0>] ? wq_barrier_func+0x0/0x20
[11028.219375] [<ffffffff8108bfc4>] flush_workqueue+0x54/0x80
[11028.225712] [<ffffffffa05a0576>] ipoib_mcast_stop_thread+0x66/0x90 [ib_ipoib]
[11028.233988] [<ffffffffa059ccea>] ipoib_ib_dev_down+0x6a/0x100 [ib_ipoib]
[11028.241678] [<ffffffffa059849a>] ipoib_stop+0x8a/0x140 [ib_ipoib]
[11028.248692] [<ffffffff8142adf1>] dev_close+0x71/0xc0
[11028.254447] [<ffffffff8142a631>] dev_change_flags+0xa1/0x1d0
[11028.261062] [<ffffffffa059851b>] ipoib_stop+0x10b/0x140 [ib_ipoib]
[11028.268172] [<ffffffff8142adf1>] dev_close+0x71/0xc0
[11028.273922] [<ffffffff8142a631>] dev_change_flags+0xa1/0x1d0
[11028.280452] [<ffffffff8148f20b>] devinet_ioctl+0x5eb/0x6a0
[11028.286786] [<ffffffff814903b8>] inet_ioctl+0x88/0xa0
[11028.292633] [<ffffffff8141591a>] sock_ioctl+0x7a/0x280
[11028.298576] [<ffffffff81189012>] vfs_ioctl+0x22/0xa0
[11028.304326] [<ffffffff81140540>] ? unmap_region+0x110/0x130
[11028.310756] [<ffffffff811891b4>] do_vfs_ioctl+0x84/0x580
[11028.316897] [<ffffffff81189731>] sys_ioctl+0x81/0xa0
and
11028.017533] [<ffffffff8105a5c3>] ? perf_event_task_sched_out+0x33/0x80
[11028.025030] [<ffffffff8100bb8e>] ? apic_timer_interrupt+0xe/0x20
[11028.031945] [<ffffffff814eb2ae>] __mutex_lock_slowpath+0x13e/0x180
[11028.039053] [<ffffffff814eb14b>] mutex_lock+0x2b/0x50
[11028.044910] [<ffffffffa059f7e7>] __ipoib_ib_dev_flush+0x37/0x210 [ib_ipoib]
[11028.052894] [<ffffffffa059fa00>] ? ipoib_ib_dev_flush_light+0x0/0x20 [ib_ipoib]
[11028.061363] [<ffffffffa059fa17>] ipoib_ib_dev_flush_light+0x17/0x20 [ib_ipoib]
[11028.069738] [<ffffffff8108b120>] worker_thread+0x170/0x2a0
[11028.076068] [<ffffffff81090990>] ? autoremove_wake_function+0x0/0x40
[11028.083374] [<ffffffff8108afb0>] ? worker_thread+0x0/0x2a0
[11028.089709] [<ffffffff81090626>] kthread+0x96/0xa0
[11028.095266] [<ffffffff8100c0ca>] child_rip+0xa/0x20
[11028.100921] [<ffffffff81090590>] ? kthread+0x0/0xa0
[11028.106573] [<ffffffff8100c0c0>] ? child_rip+0x0/0x20
[11028.112423] INFO: task ifconfig:23640 blocked for more than 120 seconds.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Change CM skb memory allocation to use GFP_KERNEL when possible.
During device init there's no need to use GFP_ATOMIC when allocating
memory for the CM skbs -- use GFP_KERNEL instead.
Signed-off-by: Tal Alon <talal@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
If napi has never been enabled when calling ipoib_ib_dev_stop, a
kernel crash occurs, because the verbs layer completion handler
(ipoib_ib_completion) calls napi_schedule unconditionally.
If the napi structure passed in the napi_schedule call has not
been initialized, napi will crash.
The cleanest solution is to simply enable napi before calling
ipoib_ib_dev_stop in the dev_open error flow. (dev_stop then
immediately disables napi).
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Now with percpu refcounting for se_lun in place, go ahead and drop
the legacy per se_cmd accounting for se_lun shutdown.
This includes __transport_clear_lun_from_sessions(), the associated
transport_lun_wait_for_tasks() logic, along with a handful of now
unused se_cmd structure members and ->transport_state bits.
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch adds support for completion interrupt coalescing that
allows only every ISERT_COMP_BATCH_COUNT (8) to set IB_SEND_SIGNALED,
thus avoiding completion interrupts for every posted iser_tx_desc.
The batch processing is done using a per isert_conn llist that once
IB_SEND_SIGNALED has been set is saved to tx_desc->comp_llnode_batch,
and completion processing of previously posted iser_tx_descs is done
in a single shot from within isert_send_completion() code.
Note this is only done for response PDUs from ISCSI_OP_SCSI_CMD, and
all other control type of PDU responses will force an implicit batch
drain to occur.
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch changes isert_connect_release() to correctly check for
the existence struct isert_device *device before checking for
isert_device->use_frwr.
Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Sagi Grimberg