This patch adds following changes to support RoCE-v2
in the UD path.
* During AH creation GID-type is resolved for a given gid-index.
* Based on GID-type protocol header is built.
* Work completion reports network header type and set
IB_WC_WITH_NETWORK_HDR_TYPE flag in wc->wc_flags to indicate
that the network header type is valid.
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to read device configuration and initialize port-immutables
to report UDP-Encap flag during port query.
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Today ocrdma driver defer arming the CQ till poll is called.
This was used to prevent calling poll-cq on an armed CQ.
Recently a set of new CQ API has been introduced into the linux
kernel. The implementation of this API guarantees that a given
CQ is never armed before calling poll on it. Most of the kernel
ULPs have already moved to use this new API or have a code where
poll is called before arming the CQ.
Thus, the above workaround in ocrdma is not needed anymore.
This patch removes the additional logic to deffer arm till poll
is called. This patch adds a simple scheme where ib_req_notify_cq()
will actually arm the cq.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Recently Dough Ledford reported a deadlock happening
between ocrdma-load sequence and NetworkManager service
issuing "open" on be2net interface.
The deadlock happens when any be2net hook (e.g. open/close) is called
in parallel to insmod ocrdma.ko.
A. be2net is sending administrative open/close event to ocrdma holding
device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net.
So sequence of locks is rtnl_lock---> device_list lock
B. When new ocrdma roce device gets registered, infiniband stack now
takes rtnl_lock in ib_register_device() in GID initialization routines.
So sequence of locks in this path is device_list lock ---> rtnl_lock.
This improper locking sequence causes deadlock.
With this patch we stop using administrative open and close events
injected by be2net driver. These events were used to dispatch PORT_ACTIVE
and PORT_ERROR events to the IB-stack. This patch implements a logic
to receive async-link-events generated from CNA whenever link-state-change
is detected. Now on, these async-events will be used to dispatch
PORT_ACTIVE and PORT_ERROR events to IB-stack.
Depending on async-events from CNA removes the need to hold device-list-mutex
and thus breaks the busy-wait scenario.
Reported-by: Doug Ledford <dledford@redhat.com>
CC: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Support the new memory registration API by allocating a
private page list array in ocrdma_mr and populate it when
ocrdma_map_mr_sg is invoked. Also, support IB_WR_REG_MR
by duplicating IB_WR_FAST_REG_MR, but take the needed
information from different places:
- page_size, iova, length, access flags (ib_mr)
- page array (ocrdma_mr)
- key (ib_reg_wr)
The IB_WR_FAST_REG_MR handlers will be removed later when
all the ULPs will be converted.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
ocrdma_dev_list is not used by the driver. So removing
the references of this variable. dev->rcu was introduced
for the ipv6 notifier for GID management. This is no longer
required as the GID management is outside the HW driver.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
1.Change query_gid hook to return value from IB/Core GID
management APIs.
2.Get rid of all the netdev notifier chain subscription code as well
as maintenance of SGID Table in memory.
3.Implement get_netdev hook in driver.
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change of license from GPLv2 to dual-license (GPLv2 and BSD 2-Clause)
All contributors were contacted off-list and permission to make this
change was received. The complete list of contributors are Cc:ed here.
Cc: Tejun Heo <tj@kernel.org>
Cc: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Moni Shoua <monis@mellanox.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Li RongQing <roy.qing.li@gmail.com>
Cc: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rdma_addr_find_dmac_by_grh fails to resolve dmac for link local address.
Use rdma_get_ll_mac to resolve the link local address.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support for interrupt moderation for ocrdma device. Thresholds
for high interrupt rates are static values derived based on experimental
results.
Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Move PD allocation and deallocation from firmware to driver. At
driver load time all the PDs will be requested from firmware and their
management will be handled by driver to reduce mailbox commands
overhead at runtime.
Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
HW can support 16K STAG entries. Change this max limit. Also, move
this array out of ocrdma_dev to reduce the size of this structure.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
If any mailbox command reports timeout, save the state in the driver,
to prevent issuing any more commands to the HW. Do proper cleanup
even if FW is in error state.
Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.Com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch implements routine to query the PFC priority from the
adapter port.
Following are the changes implemented:
* A new FW command is implemented to query the operational/admin DCBX
configuration from the FW and obtain active priority(service
level).
* Adds support for the async event reported by FW when the PFC
priority changes. Service level is re-initialized during modify_qp
or create_ah, based on this event.
* Maintain SL value in ocrdma_dev structure and refer that as and
when needed.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Clean up code. Also modifying GSI QP to error during ocrdma_close is fixed.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Issue mailbox commands to query ocrdma controller information and phy
information and print them while adding ocrdma device.
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
ocrdma driver selects execution path based on sli_family and asic
generation number. This introduces code to read the asic gen number
from pci register instead of obtaining it from the Emulex NIC driver.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Stale entries in the CQ being destroyed causes hardware to generate
EQEs indefinitely for a given CQ. Thus causing uncontrolled execution
of irq_handler. This patch fixes this using following sementics:
* irq_handler will ring EQ doorbell atleast once and implement budgeting scheme.
* cq_destroy will count number of valid entires during destroy and ring
cq-db so that hardware does not generate uncontrolled EQE.
* cq_destroy will synchronize with last running irq_handler instance.
* arm_cq will always defer arming CQ till poll_cq, except for the first arm_cq call.
* poll_cq will always ring cq-db with arm=SET if arm_cq was called prior to enter poll_cq.
* poll_cq will always ring cq-db with arm=UNSET if arm_cq was not called prior to enter poll_cq.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch is similar in spirit to the "IB/mlx4: Handle Ethernet L2
parameters for IP based GID addressing". It handles the fact that IP
based RoCE gids don't store Ethernet L2 parameters, MAC and VLAN.
When building an address handle, instead of parsing the dgid to
get the MAC and VLAN, take them from the address handle attributes.
Cc: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) ocrdma_remove_free() is called from a call_rcu callback funtion
context, which can be a bottom-half context. So the code in
ocrdma_remove_free should not sleep.
But ocrdma_cleanup_hw() can sleep, So move it ocrdma_remove()
instead of ocrdma_remove_free.
2) Fix a couple of kbuild test robot warnings.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
In UMC case, driver needs to fill PVID in the address vector
template for UD traffic.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Create_CQ verb doesn't provide a PD pointer. So, until now we are
creating all (both userspace and kernel) CQ DB regions from PD0. This
will result in mmapping PD0 to applications. A rogue userspace
application can mess things up.
Also more serious issues is even the be2net NIC uses PD0.
This patch addresses this problem by:
1) Create a PD page for every userspace application when the
alloc_ucontext is called. This will be destroyed in
dealloc_ucontext.
2) All CQs for that context will use the PD allocated in ucontext.
3) The first create_PD call from application will result in returning
the PD address from its ucontext (no new PD will be created).
4) For subsecquent create_pd calls from application, we create new PDs for
the application.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) Fixed setting FR_MR bit for FRWR stag allocation
2) Access rights are passsed during FRWR stage and not during STAT allocation stage
3) FRWR WQE structure cleanup
4) Add QP level signaled bit.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
There are cases like SRIOV where can get only one MSI-X vector
allocated for RoCE. In that case we need to use the vector for both
data plane and control plane. We need to use EQ create version V2.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Also get the max_srq value from query_config mailbox response.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) Fix ocrdma_get_num_posted_shift for upto 128 QPs.
2) Create for min of dev->max_wqe and requested wqe in create_qp.
3) As part of creating ird queue, populate with basic header templates.
4) Make sure all the DB memory allocated to userspace are page aligned.
5) Fix issue in checking the mmap local cache.
6) Some code cleanup.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
1) In post recv, don't ring the DB doorbell if the QP is in RTR state.
Cache the DB calls, until the QP is moved to RTS state.
2) Add max_rd_sge support to dev->attr.
3) Code cleanup in alloc_pd path.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Remove private macro ocrdma_err and replace with standard pr_err.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Remove use_cnt. Rely on IB midlayer to keep track of the use count.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Fix max sge calculation for sq, rq, srq for all hardware types.
Signed-off-by: Mahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Correct queue free count math for SQ, RQ for all hardware type.
Update user-kernel ABI interface.
Signed-off-by: Parav Pandit <parav.pandit@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Events sent to ocrdma_inet6addr_event() are sent from an atomic context,
therefore we can't try to lock a mutex within the notifier callback.
We could just switch the mutex to a spinlock since all it does it
protect a list, but I've gone ahead and switched the list to use RCU
instead. I couldn't fully test it since I don't have IB hardware, so
if it doesn't fully work for some reason let me know and I'll switch
it back to using a spinlock.
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
[ Fixed locking in ocrdma_add(). - Roland ]
Signed-off-by: Roland Dreier <roland@purestorage.com>
Devesh Sharma