Commit Graph

13 Commits

Author SHA1 Message Date
Stanimir Varbanov b182cc4d59 firmware: qcom_scm: add two scm calls for iommu secure page table
Those two new SCM calls are needed from qcom-iommu driver in order
to initialize secure iommu page table.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-28 16:03:21 -05:00
Rob Clark a2c680c6ce firmware/qcom: add qcom_scm_restore_sec_cfg()
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-28 16:03:21 -05:00
Andy Gross a811b420b6 firmware: qcom_scm: Add set remote state API
This patch adds a set remote state SCM API.  This will be used by the
Venus and GPU subsystems to set state on the remote processors.

This work was based on two patch sets by Jordan Crouse and Stanimir
Varbanov.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-16 23:45:04 -06:00
Bjorn Andersson dd4fe5b292 firmware: qcom: scm: Expose PAS command 10 as reset-controller
PAS command 10 is used to assert and deassert the MSS reset via
TrustZone, expose this as a reset-controller to mimic the direct
access case.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-24 22:53:52 -05:00
Bjorn Andersson f01e90fe34 firmware: qcom: scm: Peripheral Authentication Service
This adds the Peripheral Authentication Service (PAS) interface to the
Qualcomm SCM interface. The API is used to authenticate and boot a range
of external processors in various Qualcomm platforms.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-24 22:53:50 -05:00
Kumar Gala 6b1751a86c firmware: qcom: scm: Add support for ARM64 SoCs
Add an implementation of the SCM interface that works on ARM64 SoCs.  This
is used by things like determine if we have HDCP support or not on the
system.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-24 13:34:00 -05:00
Andy Gross 16e59467a4 firmware: qcom: scm: Convert to streaming DMA APIS
This patch converts the Qualcomm SCM driver to use the streaming DMA APIs
for communication buffers.  This is being done so that the
secure_flush_area call can be removed.  Using the DMA APIs will also make
the SCM32 symmetric to the coming SCM64 code.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-24 13:34:00 -05:00
Andy Gross 11bdcee4a6 firmware: qcom: scm: Generalize shared error map
This patch moves the qcom_scm_remap_error function to the include file
where can be used by both the 32 and 64 bit versions of the code.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-24 13:33:59 -05:00
Andy Gross 13e7774780 firmware: qcom: scm: Use atomic SCM for cold boot
This patch changes the cold_set_boot_addr function to use atomic SCM
calls.  cold_set_boot_addr required adding qcom_scm_call_atomic2 to
support the two arguments going to the smc call.  Using atomic removes
the need for memory allocation and instead places all arguments in
registers.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-24 13:33:59 -05:00
Rob Clark c7b7c60949 qcom-scm: fix endianess issue in __qcom_scm_is_call_available
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14 14:51:21 -05:00
Russell King efaa6e266b firmware: qcom_scm-32: replace open-coded call to __cpuc_flush_dcache_area()
Rathe rthan directly accessing architecture internal functions, provide
an "method"-centric wrapper for qcom_scm-32 to do what's necessary to
ensure that the secure monitor can see the data.  This is called
"secure_flush_area" and ensures that the specified memory area is
coherent across the secure boundary.

Acked-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-11 18:45:00 +01:00
jilai wang 9626b6993b firmware: qcom: scm: Add HDCP Support
HDCP driver needs to check if secure environment supports HDCP.  If it's
supported, then it requires to program some registers through SCM.
Add qcom_scm_hdcp_available and qcom_scm_hdcp_req to support these
requirements.

Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-05-28 10:47:45 -05:00
Kumar Gala b6a1dfbc7d firmware: qcom: scm: Split out 32-bit specific SCM code
Split out the 32-bit SCM implementation into its own file to prep for
supporting a 64-bit/ARM64 implementation as well.  We create a simple shim
to ensure both versions conform to the same interface.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-04-28 14:20:40 -05:00