Commit Graph

334 Commits

Author SHA1 Message Date
Linus Torvalds 0a135ba14d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: add __percpu sparse annotations to what's left
  percpu: add __percpu sparse annotations to fs
  percpu: add __percpu sparse annotations to core kernel subsystems
  local_t: Remove leftover local.h
  this_cpu: Remove pageset_notifier
  this_cpu: Page allocator conversion
  percpu, x86: Generic inc / dec percpu instructions
  local_t: Move local.h include to ringbuffer.c and ring_buffer_benchmark.c
  module: Use this_cpu_xx to dynamically allocate counters
  local_t: Remove cpu_local_xx macros
  percpu: refactor the code in pcpu_[de]populate_chunk()
  percpu: remove compile warnings caused by __verify_pcpu_ptr()
  percpu: make accessors check for percpu pointer in sparse
  percpu: add __percpu for sparse.
  percpu: make access macros universal
  percpu: remove per_cpu__ prefix.
2010-03-03 07:34:18 -08:00
Linus Torvalds ac0f6f927d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
  ARM: Eliminate decompressor -Dstatic= PIC hack
  ARM: 5958/1: ARM: U300: fix inverted clk round rate
  ARM: 5956/1: misplaced parentheses
  ARM: 5955/1: ep93xx: move timer defines into core.c and document
  ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
  ARM: 5953/1: ep93xx: fix broken build of clock.c
  ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
  ARM: 5949/1: NUC900 add gpio virtual memory map
  ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
  ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
  ARM: make_coherent(): fix problems with highpte, part 2
  MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
  ARM: 5945/1: ep93xx: include correct irq.h in core.c
  ARM: 5933/1: amba-pl011: support hardware flow control
  ARM: 5930/1: Add PKMAP area description to memory.txt.
  ARM: 5929/1: Add checks to detect overlap of memory regions.
  ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
  ARM: 5927/1: Make delimiters of DMA area globally visibly.
  ARM: 5926/1: Add "Virtual kernel memory..." printout.
  ARM: 5920/1: OMAP4: Enable L2 Cache
  ...

Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-03-01 09:15:15 -08:00
Linus Torvalds 6ebdc661b6 Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits)
  of: remove undefined request_OF_resource & release_OF_resource
  of/sparc: Remove sparc-local declaration of allnodes and devtree_lock
  of: move definition of of_chosen into common code.
  of: remove unused extern reference to devtree_lock
  of: put default string compare and #a/s-cell values into common header
  of/flattree: Don't assume HAVE_LMB
  of: protect linux/of.h with CONFIG_OF
  proc_devtree: fix THIS_MODULE without module.h
  of: Remove old and misplaced function declarations
  of/flattree: Make the kernel accept ePAPR style phandle information
  of/flattree: endian-convert members of boot_param_header
  of: assume big-endian properties, adding conversions where necessary
  of: use __be32 for cell value accessors
  of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing
  of/flattree: use callback to setup initrd from /chosen
  proc_devtree: include linux/of.h
  of: make set_node_proc_entry private to proc_devtree.c
  of: include linux/proc_fs.h
  of/flattree: merge early_init_dt_scan_memory() common code
  of: add 'of_' prefix to machine_is_compatible()
  ...
2010-02-25 15:38:37 -08:00
Steven J. Magnani 83b4d17d88 microblaze: Fix out_le32() macro
Trailing semicolon causes compilation involving out_le32() to fail.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-24 13:18:49 +01:00
Michal Simek 0d670b2472 microblaze: Fix cache loop function for cache range
I create wrong asm code but none test shows that this part of code is wrong.
I am not convinces that were good idea to create asm optimized macros
for caches. The reason is that there is not optimization with previous code
that's why make sense to add old code and do some benchmarking which
functions are faster.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-24 13:18:29 +01:00
Russell King 4b3073e1c5 MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
On VIVT ARM, when we have multiple shared mappings of the same file
in the same MM, we need to ensure that we have coherency across all
copies.  We do this via make_coherent() by making the pages
uncacheable.

This used to work fine, until we allowed highmem with highpte - we
now have a page table which is mapped as required, and is not available
for modification via update_mmu_cache().

Ralf Beache suggested getting rid of the PTE value passed to
update_mmu_cache():

  On MIPS update_mmu_cache() calls __update_tlb() which walks pagetables
  to construct a pointer to the pte again.  Passing a pte_t * is much
  more elegant.  Maybe we might even replace the pte argument with the
  pte_t?

Ben Herrenschmidt would also like the pte pointer for PowerPC:

  Passing the ptep in there is exactly what I want.  I want that
  -instead- of the PTE value, because I have issue on some ppc cases,
  for I$/D$ coherency, where set_pte_at() may decide to mask out the
  _PAGE_EXEC.

So, pass in the mapped page table pointer into update_mmu_cache(), and
remove the PTE value, updating all implementations and call sites to
suit.

Includes a fix from Stephen Rothwell:

  sparc: fix fallout from update_mmu_cache API change

  Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20 16:41:46 +00:00
Grant Likely df0edeb59e of: remove undefined request_OF_resource & release_OF_resource
Neither request_OF_resource or release_OF_resource are defined
anywhere.  Remove the declarations.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-14 13:02:45 -07:00
Grant Likely fc0bdae49d of: move definition of of_chosen into common code.
Rather than defining of_chosen in each arch, it can be defined for all
in driver/of/base.c

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-14 07:13:55 -07:00
Grant Likely 22d5579e66 of: remove unused extern reference to devtree_lock
Neither the powerpc nor the microblaze code use devtree_lock anymore.
Remove the extern reference.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-14 07:13:52 -07:00
Grant Likely 7c7b60cb87 of: put default string compare and #a/s-cell values into common header
Most architectures don't need to change these.  Put them into common
code to eliminate some duplication

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-14 07:13:50 -07:00
Jeremy Kerr 4ef7b373df of/flattree: Don't assume HAVE_LMB
We don't always have lmb available, so make arches provide an
early_init_dt_alloc_memory_arch() to handle the allocation of
memory in the fdt code.

When we don't have lmb.h included, we need asm/page.h for __va.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-14 07:13:47 -07:00
Jeremy Kerr 1406bc2f57 of/flattree: use callback to setup initrd from /chosen
At present, the fdt code sets the kernel-wide initrd_start and
initrd_end variables when parsing /chosen. On ARM, we only set these
once the bootmem has been reserved.

This change adds an arch hook to setup the initrd from the device
tree:

 void early_init_dt_setup_initrd_arch(unsigned long start,
				      unsigned long end);

The arch-specific code can then setup the initrd however it likes.

Compiled on powerpc, with CONFIG_BLK_DEV_INITRD=y and =n.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09 08:34:10 -07:00
Grant Likely 51975db0b7 of/flattree: merge early_init_dt_scan_memory() common code
Merge common code between PowerPC and Microblaze architectures.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-09 08:33:10 -07:00
Jeremy Kerr 89751a7cb7 of: merge of_find_node_by_phandle
Merge common function between powerpc, sparc and microblaze. Code is
identical for powerpc and microblaze, but adds a lock (and release) of
the devtree_lock on sparc.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09 08:32:48 -07:00
Grant Likely fcdeb7fedf of: merge of_attach_node() & of_detach_node()
Merge common code between PowerPC and Microblaze

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-09 08:32:42 -07:00
Grant Likely 5805371405 microblaze: remove early_init_dt_scan_cpus() and phyp_dump_*()
Microblaze only has one CPU, it isn't SMP at all.  early_init_dt_scan_cpus()
is effectively just a no-op, so remove it.

Microblaze doesn't support hypervisor assisted dump either, so the phyp stuff
can also go.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-02-09 08:32:36 -07:00
Michal Simek a601341111 microblaze: Invalidate dcache before enabling it
We found that on write-trough kernel is necessary to do that invalidation.
One WB is possible to use invalidation too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-08 11:39:18 +01:00
Steven J. Magnani 58424a49cb microblaze: fix interrupt state restore
Interrupts must be disabled while an interrupt state restore
(prep for interrupt return) is in progress.
Code to do this was lost in the port to the mainline kernel.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-03 13:17:44 +01:00
Michal Simek 7823860ca2 microblaze: Defconfig update
There were several changes in Microblaze defconfig that's why
is good to update defconfigs.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-03 10:18:20 +01:00
Tejun Heo ab386128f2 Merge branch 'master' into percpu 2010-02-02 14:38:15 +09:00
Grant Likely 0ada0a7312 Merge commit 'v2.6.33-rc5' into secretlab/test-devicetree 2010-01-28 14:38:25 -07:00
Grant Likely 6016a363f6 of: unify phandle name in struct device_node
In struct device_node, the phandle is named 'linux_phandle' for PowerPC
and MicroBlaze, and 'node' for SPARC.  There is no good reason for the
difference, it is just an artifact of the code diverging over a couple
of years.  This patch renames both to simply .phandle.

Note: the .node also existed in PowerPC/MicroBlaze, but the only user
seems to be arch/powerpc/platforms/powermac/pfunc_core.c.  It doesn't
look like the assignment between .linux_phandle and .node is
significantly different enough to warrant the separate code paths
unless ibm,phandle properties actually appear in Apple device trees.

I think it is safe to eliminate the old .node property and use
phandle everywhere.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-28 14:06:53 -07:00
Grant Likely 923f7e30b4 of: Merge of_node_get() and of_node_put()
Merge common code between PowerPC and MicroBlaze

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-28 13:52:53 -07:00
Grant Likely 1f43cfb947 of: merge machine_is_compatible()
Merge common code between PowerPC and Microblaze

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-28 13:47:25 -07:00
Michal Simek 878194c823 microblaze: pci_controller->arch_data really is a struct device_node *
we are follow powerpc change:
44ef339073

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18 16:36:07 +01:00
Michal Simek 296e2603cf microblaze: Add missing double apostrophe in Kconfig
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18 16:35:52 +01:00
Michal Simek 90974cb4cc microblaze: Add PT_ macros for special purpose regs
PT_ macros are used by gdb and strace uses them too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18 16:35:39 +01:00
Michal Simek 4a3bb9a900 microblaze: Enable accept4 syscall
We had wrong name in unistd.h + I wire up this syscall
in syscall table.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18 16:35:27 +01:00
Michal Simek ce9c37f131 microblaze: Wire up recvmmsg syscall
Patch a2e2725541 should
contain change in unistd.h too. The same problem
had MIPS.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18 16:35:15 +01:00
Tejun Heo 32032df6c2 Merge branch 'master' into percpu
Conflicts:
	arch/powerpc/platforms/pseries/hvCall.S
	include/linux/percpu.h
2010-01-05 09:17:33 +09:00
Linus Torvalds 5a865c0606 Merge branch 'for-33' of git://repo.or.cz/linux-kbuild
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
  net: fix for utsrelease.h moving to generated
  gen_init_cpio: fixed fwrite warning
  kbuild: fix make clean after mismerge
  kbuild: generate modules.builtin
  genksyms: properly consider  EXPORT_UNUSED_SYMBOL{,_GPL}()
  score: add asm/asm-offsets.h wrapper
  unifdef: update to upstream revision 1.190
  kbuild: specify absolute paths for cscope
  kbuild: create include/generated in silentoldconfig
  scripts/package: deb-pkg: use fakeroot if available
  scripts/package: add KBUILD_PKG_ROOTCMD variable
  scripts/package: tar-pkg: use tar --owner=root
  Kbuild: clean up marker
  net: add net_tstamp.h to headers_install
  kbuild: move utsrelease.h to include/generated
  kbuild: move autoconf.h to include/generated
  drop explicit include of autoconf.h
  kbuild: move compile.h to include/generated
  kbuild: drop include/asm
  kbuild: do not check for include/asm-$ARCH
  ...

Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
2009-12-17 07:23:42 -08:00
Christoph Hellwig 698ba7b5a3 elf: kill USE_ELF_CORE_DUMP
Currently all architectures but microblaze unconditionally define
USE_ELF_CORE_DUMP.  The microblaze omission seems like an error to me, so
let's kill this ifdef and make sure we are the same everywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Simek <michal.simek@petalogix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:12 -08:00
Thomas Gleixner 239007b844 genirq: Convert irq_desc.lock to raw_spinlock
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 23:55:33 +01:00
Michal Simek 571202f50f microblaze: Remove rt_sigsuspend wrapper
Generic rt_sigsuspend syscalls doesn't need any asm wrapper.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:12 +01:00
steve@digidescorp.com 825c9a359e microblaze: nommu: Don't clobber R11 on syscalls
The noMMU syscall trap has a bug that causes R11 to be zero on return to
userland. Remove the extra "save" of R11 responsible for the bug.

Remove reloading of mode indicator because r11 already contains it.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:11 +01:00
Michal Simek 233eb92115 microblaze: Remove show_tmem function
show_tmem function do nothing that's why I removed it.
There is also cleaning of commented ancient code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:11 +01:00
Michal Simek 2ee2ff875a microblaze: Support for WB cache
Microblaze version 7.20.d is the first MB version which can be run
on MMU linux. Please do not used previous version because they contain
HW bug.
Based on WB support was necessary to redesign whole cache design.
Microblaze versions from 7.20.a don't need to disable IRQ and cache
before working with them that's why there are special structures for it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:10 +01:00
Michal Simek c8983a5c6e microblaze: Add PVR for Microblaze v7.30.a
Microblaze v7.30.a will have 0x10 version string.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:10 +01:00
Michal Simek 81ab0dfd94 microblaze: Remove ancient and fake microblaze version from cpu_ver table
We need to continue with next microblaze PVR version that's why
I have to remove that ancient version. These version strings not match
any versions. From Microblaze v5.00.a is possible to use this style.
I believe that none use ancients versions. If yes they will be just
labeled as unknown version.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:09 +01:00
Michal Simek 5de2344630 microblaze: Remove panic_timeout init value
panic_timeout is in BSS section and it is cleared with BSS section.
This means that value is setup to 0.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:09 +01:00
Michal Simek 11d5136043 microblaze: Do not count system calls in default
There is not necessary to count system calls that's why
I added DEBUG macro

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:08 +01:00
Michal Simek 3c5e56724d microblaze: Enable DTC compilation
For simpleImage format we need to compile DTC. There is still possibility
to compile only Linux kernel without DTB compiled-in.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:08 +01:00
John Williams 3540ce8238 microblaze: Core oprofile configs and hooks
Microblaze uses timer interrupt mode. Microblaze don't have
any performance counter that's why we use just simple implementation.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:07 +01:00
steve@digidescorp.com 33d9ff5985 microblaze: Fix level interrupt ACKing
Level interrupts need to be ack'd in the unmask handler, as in powerpc.
Among other issues, this bug causes the system clock to appear to run at
double-speed.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:06 +01:00
Michal Simek 833d0d8da4 microblaze: Enable futimesat syscall
Futimesat was disabled. LTP testing shows that MB has no
problem with this syscall.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:06 +01:00
Michal Simek f6e1f1b480 microblaze: Checking DTS against PVR for write-back cache
WB cache has special flag in PVR. There is added checking mechanism
for PVR and DTS.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:05 +01:00
Michal Simek d4f182700b microblaze: Remove duplicity from pgalloc.h
just file cleanup

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:05 +01:00
Michal Simek fd3db0a675 microblaze: Futex support
Microblaze v7.20 provides new lwx, swx instructions which bring
possibility to implement lock rutines.

There are some tests in open posix thread LTP part but current
toolchain not support it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:04 +01:00
Michal Simek d68bf9705a microblaze: Adding dev_arch_data functions
The functions, dev_arch_data_set_node and get_node are missing
and are needed by some device drivers such as I2C.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:04 +01:00
John Linn 6d858535be microblaze: Fix the heartbeat gpio to be more robust
The device tree handling for the gpio in the heart beat was not handling
the system when there was no gpio and it wasn't working with a newer version
of the gpio core which does not have the is-bidir property.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:03 +01:00