Add functions to handle page faults in the TDP MMU. These page faults
are currently handled in much the same way as the x86 shadow paging
based MMU, however the ordering of some operations is slightly
different. Future patches will add eager NX splitting, a fast page fault
handler, and parallel page faults.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl+R8a4ACgkQ+mJfZA7r
E8oazwgAu+NP5GlIHTcG6bV4vxRaEDdlDf3uH+ENOGfRT0PoX6qVNpkdc/nmTZC/
RFzHVsKJi1zXS9XetP33YKZ7KFPZxJMXdhGSu+f08Q6nf0jBdFUm3mhnrDWoLO9+
fS88L4HqXREvBLDctN89akuZ1/pZ3p0KsBqAOuP+LjRAsquHgIP3eUzwZMVbTgTZ
KLojKMHHrZxRtynMFrW6JO+gBok+mGydpOp7F1bK4jSmOIlYA5OsIW3xn9+Ytveu
9Od/yIjKeCyPD64ncz8wcbcPxZhnXENzZElBYT6sQSHDZ9wNCOUhfJT0v8t8G5So
vzOvf2YXa+2IKiGY2sd2ov9svz3Wgg==
=oidT
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-fixes-2020-10-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Tweak initia DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022205613.GA3469192@intel.com
When starting a HP machine with HIL driver but without an HIL keyboard
or HIL mouse attached, it may happen that data written to the HIL loop
gets stuck (e.g. because the transaction queue is full). Usually one
will then have to reboot the machine because all you see is and endless
output of:
Transaction add failed: transaction already queued?
In the higher layers hp_sdc_enqueue_transaction() is called to queued up
a HIL packet. This function returns an error code, and this patch adds
the necessary checks for this return code and disables the HIL driver if
further packets can't be sent.
Tested on a HP 730 and a HP 715/64 machine.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
The HP 730 machine returned strange errors when I tried setting the rtc
time. Add some debug code to improve the possibility to trace errors
and document that hppa probably has as Y2k38 problem.
Signed-off-by: Helge Deller <deller@gmx.de>
- Remove unused for useless code from qconf
- Allow to edit "int", "hex", "string" options in place, and remove the
separate edit box from qconf
-----BEGIN PGP SIGNATURE-----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=YN7k
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- Remove unused or useless code from qconf
- Allow to edit "int", "hex", "string" options in place, and remove the
separate edit box from qconf
* tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: create QApplication after option checks
kconfig: qconf: remove Y, M, N columns
kconfig: qconf: remove ConfigView class
kconfig: qconf: move setShowName/Range() to ConfigList from ConfigView
kconfig: qconf: remove ConfigLineEdit class
kconfig: qconf: allow to edit "int", "hex", "string" menus in-place
kconfig: qconf: show data column all the time
kconfig: qconf: move ConfigView::updateList(All) to ConfigList class
kconfig: qconf: remove unused ConfigItem::okRename()
kconfig: qconf: update the intro message to match to the current code
kconfig: qconf: reformat the intro message
With the set_fs change, we can no longer rely on copy_{to,from}_user()
accepting a kernel pointer, and it was bad form to do so anyway. Clean
this up and change the internal helper that io_uring uses to deal with
kernel pointers instead. This puts the offset copy in/out in __do_splice()
instead, which just calls the same helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We jump through a hoop for fixed buffers, where we first map these to
a bvec(), then kmap() the bvec to obtain the pointer we copy to/from.
This was always a bit ugly, and with the set_fs changes, it ends up
being practically problematic as well.
There's no need to jump through these hoops, just use the original user
pointers and length for the non iter based read/write.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
- New fsl-mc vfio bus driver supporting userspace drivers of objects
within NXP's DPAA2 architecture (Diana Craciun)
- Support for exposing zPCI information on s390 (Matthew Rosato)
- Fixes for "detached" VFs on s390 (Matthew Rosato)
- Fixes for pin-pages and dma-rw accesses (Yan Zhao)
- Cleanups and optimize vconfig regen (Zenghui Yu)
- Fix duplicate irq-bypass token registration (Alex Williamson)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=LDPo
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- New fsl-mc vfio bus driver supporting userspace drivers of objects
within NXP's DPAA2 architecture (Diana Craciun)
- Support for exposing zPCI information on s390 (Matthew Rosato)
- Fixes for "detached" VFs on s390 (Matthew Rosato)
- Fixes for pin-pages and dma-rw accesses (Yan Zhao)
- Cleanups and optimize vconfig regen (Zenghui Yu)
- Fix duplicate irq-bypass token registration (Alex Williamson)
* tag 'vfio-v5.10-rc1' of git://github.com/awilliam/linux-vfio: (30 commits)
vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages
vfio/pci: Clear token on bypass registration failure
vfio/fsl-mc: fix the return of the uninitialized variable ret
vfio/fsl-mc: Fix the dead code in vfio_fsl_mc_set_irq_trigger
vfio/fsl-mc: Fixed vfio-fsl-mc driver compilation on 32 bit
MAINTAINERS: Add entry for s390 vfio-pci
vfio-pci/zdev: Add zPCI capabilities to VFIO_DEVICE_GET_INFO
vfio/fsl-mc: Add support for device reset
vfio/fsl-mc: Add read/write support for fsl-mc devices
vfio/fsl-mc: trigger an interrupt via eventfd
vfio/fsl-mc: Add irq infrastructure for fsl-mc devices
vfio/fsl-mc: Added lock support in preparation for interrupt handling
vfio/fsl-mc: Allow userspace to MMAP fsl-mc device MMIO regions
vfio/fsl-mc: Implement VFIO_DEVICE_GET_REGION_INFO ioctl call
vfio/fsl-mc: Implement VFIO_DEVICE_GET_INFO ioctl
vfio/fsl-mc: Scan DPRC objects on vfio-fsl-mc driver bind
vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFO
s390/pci: track whether util_str is valid in the zpci_dev
s390/pci: stash version in the zpci_dev
vfio/fsl-mc: Add VFIO framework skeleton for fsl-mc devices
...
This introduces rpmsg_char support for GLINK and fixes a few issues.
-----BEGIN PGP SIGNATURE-----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=fv8T
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This introduces rpmsg_char support for GLINK and fixes a few issues"
* tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: glink: Expose rpmsg name attr for glink
rpmsg: glink: Add support for rpmsg glink chrdev
rpmsg: Guard against null endpoint ops in destroy
rpmsg: glink: Use complete_all for open states
rpmsg: virtio: fix compilation warning for virtio_rpmsg_channel description
rpmsg: Avoid double-free in mtk_rpmsg_register_device
rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()
This introduces support for the Mediatek MT9182 SCP and controlling the
Cortex R5F processors found in TI K3 platforms. It clones the
longstanding debugfs interface for controlling crash handling to sysfs.
Lastly it solves a bug where after a warm reset of Qualcomm platforms
the modem would crash upon first boot.
-----BEGIN PGP SIGNATURE-----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=FhqD
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for the Mediatek MT9182 SCP and controlling
the Cortex R5F processors found in TI K3 platforms. It clones the
longstanding debugfs interface for controlling crash handling to
sysfs. Lastly it solves a bug where after a warm reset of Qualcomm
platforms the modem would crash upon first boot"
* tag 'rproc-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
remoteproc/mediatek: Remove non-standard dsb()
remoteproc: Add recovery configuration to the sysfs interface
remoteproc: Add coredump as part of sysfs interface
remoteproc: Change default dump configuration to "disabled"
remoteproc: k3-r5: Add loading support for on-chip SRAM regions
remoteproc: k3-r5: Initialize TCM memories for ECC
remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem
dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs
remoteproc/mediatek: Add support for mt8192 SCP
remoteproc: Fixup coredump debugfs disable request
remoteproc: qcom_q6v5: Assign mpss region to Q6 before MBA boot
remoteproc/mediatek: fix null pointer dereference on null scp pointer
remoteproc: stm32: Fix pointer assignement
remoteproc: scp: add COMPILE_TEST dependency
of various clk driver updates. The biggest driver updates in terms of lines of
code is the Allwinner driver, closely followed by the Qualcomm and Mediatek
drivers. All of those hit high because we add so many lines of clk data. Coming
in fourth place is i.MX which also adds a bunch of clk data. This accounts for
the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for various clk
drivers that have baked in linux-next for a while. I suppose one highlight or
theme is that more clk drivers are being updated to work as modules, which is
interesting to see such critical SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory
-----BEGIN PGP SIGNATURE-----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=sKI8
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This contains no changes to the core framework. It is a collection of
various clk driver updates.
The biggest driver updates in terms of lines of code is the Allwinner
driver, closely followed by the Qualcomm and Mediatek drivers. All of
those hit high because we add so many lines of clk data. Coming in
fourth place is i.MX which also adds a bunch of clk data. This
accounts for the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for
various clk drivers that have baked in linux-next for a while. I
suppose one highlight or theme is that more clk drivers are being
updated to work as modules, which is interesting to see such critical
SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being
dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware
documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
clk: imx8mq: Fix usdhc parents order
clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
clk: Restrict CLK_HSDK to ARC_SOC_HSDK
clk: at91: sam9x60: support only two programmable clocks
clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
clk: ingenic: Use readl_poll_timeout instead of custom loop
clk: ingenic: Use to_clk_info() macro for all clocks
clk: bcm2835: add missing release if devm_clk_hw_register fails
clk: at91: clk-sam9x60-pll: remove unused variable
clk: at91: clk-main: update key before writing AT91_CKGR_MOR
clk: at91: remove the checking of parent_name
clk: clk-prima2: fix return value check in prima2_clk_init()
clk: mmp2: Fix the display clock divider base
clk: pxa: Constify static struct clk_ops
clk: baikal-t1: Mark Ethernet PLL as critical
clk: qoriq: modify MAX_PLL_DIV to 32
clk: axi-clkgen: Set power bits for fractional mode
clk: axi-clkgen: Add support for fractional dividers
...
This release cycle's updates are mostly cleanup and some minor fixes.
-----BEGIN PGP SIGNATURE-----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=zEte
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This release cycle's updates are mostly cleanup and some minor fixes"
* tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support
dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support
pwm: Allow store 64-bit duty cycle from sysfs interface
pwm: img: Fix null pointer access in probe
pwm: pca9685: Disable unused alternative addresses
pwm: pca9685: Use BIT() macro instead of shift
pwm: pca9685: Make comments more consistent
pwm: sun4i: Simplify with dev_err_probe()
pwm: sprd: Simplify with dev_err_probe()
pwm: sifive: Simplify with dev_err_probe()
pwm: rockchip: Simplify with dev_err_probe()
pwm: jz4740: Simplify with dev_err_probe()
pwm: bcm2835: Simplify with dev_err_probe()
pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro
pwm: rockchip: Keep enabled PWMs running while probing
dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support
In the header prediction fast path for a bulk data receiver, if no
data is newly acknowledged then we do not call tcp_ack() and do not
call tcp_ack_update_window(). This means that a bulk receiver that
receives large amounts of data can have the incoming sequence numbers
wrap, so that the check in tcp_may_update_window fails:
after(ack_seq, tp->snd_wl1)
If the incoming receive windows are zero in this state, and then the
connection that was a bulk data receiver later wants to send data,
that connection can find itself persistently rejecting the window
updates in incoming ACKs. This means the connection can persistently
fail to discover that the receive window has opened, which in turn
means that the connection is unable to send anything, and the
connection's sending process can get permanently "stuck".
The fix is to update snd_wl1 in the header prediction fast path for a
bulk data receiver, so that it keeps up and does not see wrapping
problems.
This fix is based on a very nice and thorough analysis and diagnosis
by Apollon Oikonomopoulos (see link below).
This is a stable candidate but there is no Fixes tag here since the
bug predates current git history. Just for fun: looks like the bug
dates back to when header prediction was added in Linux v2.1.8 in Nov
1996. In that version tcp_rcv_established() was added, and the code
only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to
apply cleanly at least as far back as v3.2.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reported-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Tested-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Link: https://www.spinics.net/lists/netdev/msg692430.html
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022143331.1887495-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In setsockopt(SO_MAX_PACING_RATE) on 64bit systems, sk_max_pacing_rate,
after extended from 'u32' to 'unsigned long', takes unintentionally
hiked value whenever assigned from an 'int' value with MSB=1, due to
binary sign extension in promoting s32 to u64, e.g. 0x80000000 becomes
0xFFFFFFFF80000000.
Thus inflated sk_max_pacing_rate causes subsequent getsockopt to return
~0U unexpectedly. It may also result in increased pacing rate.
Fix by explicitly casting the 'int' value to 'unsigned int' before
assigning it to sk_max_pacing_rate, for zero extension to happen.
Fixes: 76a9ebe811 ("net: extend sk_pacing_rate to unsigned long")
Signed-off-by: Ji Li <jli@akamai.com>
Signed-off-by: Ke Li <keli@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022064146.79873-1-keli@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Update debugging in IPVS tcp protocol handler to make it easier
to understand, from longguang.yue
2) Update TCP tracker to deal with keepalive packet after
re-registration, from Franceso Ruggeri.
3) Missing IP6SKB_FRAGMENTED from netfilter fragment reassembly,
from Georg Kohmann.
4) Fix bogus packet drop in ebtables nat extensions, from
Thimothee Cocault.
5) Fix typo in flowtable documentation.
6) Reset skb timestamp in nft_fwd_netdev.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit feb92d7d38 "(ARC: perf: don't bail setup if pct irq
missing in device-tree)" introduced a silly brown-paper bag bug:
The assignment and comparison in an if statement were not bracketed
correctly leaving the order of evaluation undefined.
|
| if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
| ^^^ ^^^^
And given such a chance, the compiler will bite you hard, fully entitled
to generating this piece of beauty:
|
| # if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
|
| bl.d @platform_get_irq <-- irq returned in r0
|
| setge r2, r0, 0 <-- r2 is bool 1 or 0 if irq >= 0 true/false
| brlt.d r0, 0, @.L114
|
| st_s r2,[sp] <-- irq saved is bool 1 or 0, not actual return val
| st 1,[r3,160] # arc_pmu.18_29->irq <-- drops bool and assumes 1
|
| # return __request_percpu_irq(irq, handler, 0,
|
| bl.d @__request_percpu_irq;
| mov_s r0,1 <-- drops even bool and assumes 1 which fails
With the snafu fixed, everything is as expected.
| bl.d @platform_get_irq <-- returns irq in r0
|
| mov_s r2,r0
| brlt.d r2, 0, @.L112
|
| st_s r0,[sp] <-- irq isaved is actual return value above
| st r0,[r13,160] #arc_pmu.18_27->irq
|
| bl.d @__request_percpu_irq <-- r0 unchanged so actual irq returned
| add r4,r4,r12 #, tmp363, __ptr
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
fast_commit mode. In addition, thanks to Mauricio for fixing a race
where mmap'ed pages that are being changed in parallel with a
data=journal transaction commit could result in bad checksums in the
failure that could cause journal replays to fail. Also notable is
Ritesh's buffered write optimization which can result in significant
improvements on parallel write workloads. (The kernel test robot
reported a 330.6% improvement on fio.write_iops on a 96 core system
using DAX[1].)
Besides that, we have the usual miscellaneous cleanups and bug fixes.
[1] https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl+RuCQACgkQ8vlZVpUN
gaNebgf/dUnQp5SG2/2zczSDqr+f8DOiuAdn9I54BAr2HwdkMbbiktKfenfpu41k
SMGNV6rYSs248dWFtkzM7C2T1dpGrdAe2OCYrU6HPR/xoZlx/RcDz39u7nXBDeup
NV7RnPgIzCAGZXCOY/Zu1k88T1eosLRTIWvIcNOspt75MC0vJ8GSmkx1bVEUsv8w
Uq6T0OREfDiLJpEZxtfbl3o+8Rfs82t3Soj4pwN8ESL/RWBTT8PlwAGhIcdjnHy/
lsgT35IrY4OL6Eas9msUmFYrWhO6cW21kWOugYALQXZ3ny4A+r5nZZcY/wCq01NX
J2Z02ZiMTZUmFFREbtc0eJukXWEVvA==
=14K9
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The siginificant new ext4 feature this time around is Harshad's new
fast_commit mode.
In addition, thanks to Mauricio for fixing a race where mmap'ed pages
that are being changed in parallel with a data=journal transaction
commit could result in bad checksums in the failure that could cause
journal replays to fail.
Also notable is Ritesh's buffered write optimization which can result
in significant improvements on parallel write workloads. (The kernel
test robot reported a 330.6% improvement on fio.write_iops on a 96
core system using DAX)
Besides that, we have the usual miscellaneous cleanups and bug fixes"
Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
ext4: fix invalid inode checksum
ext4: add fast commit stats in procfs
ext4: add a mount opt to forcefully turn fast commits on
ext4: fast commit recovery path
jbd2: fast commit recovery path
ext4: main fast-commit commit path
jbd2: add fast commit machinery
ext4 / jbd2: add fast commit initialization
ext4: add fast_commit feature and handling for extended mount options
doc: update ext4 and journalling docs to include fast commit feature
ext4: Detect already used quota file early
jbd2: avoid transaction reuse after reformatting
ext4: use the normal helper to get the actual inode
ext4: fix bs < ps issue reported with dioread_nolock mount opt
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()
ext4: data=journal: fixes for ext4_page_mkwrite()
jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers()
jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers()
ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable()
ext4: use ext4_sb_bread() instead of sb_bread()
...
The IO_REPARSE_TAG_LX_ tags originally were used by WSL but they
are preferred by the Linux client in some cases since, unlike
the NFS reparse tag (or EAs), they don't require an extra query
to determine which type of special file they represent.
Add support for readdir to recognize special file types of
FIFO, SOCKET, CHAR, BLOCK and SYMLINK. This can be tested
by creating these special files in WSL Linux and then
sharing that location on the Windows server and mounting
to the Windows server to access them.
Prior to this patch all of the special files would show up
as being of type 'file' but with this patch they can be seen
with the correct file type as can be seen below:
brwxr-xr-x 1 root root 0, 0 Oct 21 17:10 block
crwxr-xr-x 1 root root 0, 0 Oct 21 17:46 char
drwxr-xr-x 2 root root 0 Oct 21 18:27 dir
prwxr-xr-x 1 root root 0 Oct 21 16:21 fifo
-rwxr-xr-x 1 root root 0 Oct 21 15:48 file
lrwxr-xr-x 1 root root 0 Oct 21 15:52 symlink-to-file
TODO: go through all documented reparse tags to see if we can
reasonably map some of them to directories vs. files vs. symlinks
and also add support for device numbers for block and char
devices.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
The "end" pointer is either NULL or it points to the next byte to parse.
If there isn't a next byte then dereferencing "end" is an off-by-one out
of bounds error. And, of course, if it's NULL that leads to an Oops.
Printing "*end" doesn't seem very useful so let's delete this code.
Also for the last debug statement, I noticed that it should be printing
"sequence_end" instead of "end" so fix that as well.
Reported-by: Dominik Maier <dmaier@sect.tu-berlin.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This and related patches which move mount related
code to fs_context.c has the advantage of
shriking the code in fs/cifs/connect.c (which had
the second most lines of code of any of the files
in cifs.ko and was getting harder to read due
to its size) and will also make it easier to
switch over to the new mount API in the future.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Helps to shrink connect.c and make it more readable
by moving mount related code to fs_context.c and
fs_context.h
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
This patch moves the parsing of security mount options into
fs_context.ch. There are no changes to any logic.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
This will make it easier in the future, but also will allow us to
shrink connect.c which is getting too big, and harder to read
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
A break following a return statement is pointless, so drop all of
the breaks following return statements from this file.
Signed-off-by: Tom Rix <trix@redhat.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf 2020-10-22
1) Fix enforcing NULL check in verifier for new helper return types of
RET_PTR_TO_{BTF_ID,MEM_OR_BTF_ID}_OR_NULL, from Martin KaFai Lau.
2) Fix bpf_redirect_neigh() helper API before it becomes frozen by adding
nexthop information as argument, from Toke Høiland-Jørgensen.
3) Guard & fix compilation of bpf_tail_call_static() when __bpf__ arch is
not defined by compiler or clang too old, from Daniel Borkmann.
4) Remove misplaced break after return in attach_type_to_prog_type(), from
Tom Rix.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
has the same arguments as READ but allows the server to return an array
of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes.
-----BEGIN PGP SIGNATURE-----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=rcOj
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"The one new feature this time, from Anna Schumaker, is READ_PLUS,
which has the same arguments as READ but allows the server to return
an array of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes"
* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
sunrpc: raise kernel RPC channel buffer size
svcrdma: fix bounce buffers for unaligned offsets and multiple pages
nfsd: remove unneeded break
net/sunrpc: Fix return value for sysctl sunrpc.transports
NFSD: Encode a full READ_PLUS reply
NFSD: Return both a hole and a data segment
NFSD: Add READ_PLUS hole segment encoding
NFSD: Add READ_PLUS data support
NFSD: Hoist status code encoding into XDR encoder functions
NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
NFSD: Remove the RETURN_STATUS() macro
NFSD: Call NFSv2 encoders on error returns
NFSD: Fix .pc_release method for NFSv2
NFSD: Remove vestigial typedefs
NFSD: Refactor nfsd_dispatch() error paths
NFSD: Clean up nfsd_dispatch() variables
NFSD: Clean up stale comments in nfsd_dispatch()
NFSD: Clean up switch statement in nfsd_dispatch()
...
A break following a return statement is pointless, so drop it.
Signed-off-by: Tom Rix <trix@redhat.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All avs drivers have now been moved to their corresponding soc specific
directories. Additionally, they don't depend on the POWER_AVS Kconfig
anymore. Therefore, let's simply drop the drivers/power/avs directory
altogether.
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Replace memcpy with structure assignment.
- Remove unneeded codes and use helper function i_blocksize().
- Fix typos found by codespell.
-----BEGIN PGP SIGNATURE-----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=qmM6
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Replace memcpy with structure assignment
- Remove unneeded codes and use helper function i_blocksize()
- Fix typos found by codespell
* tag 'exfat-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: remove useless check in exfat_move_file()
exfat: remove 'rwoffset' in exfat_inode_info
exfat: replace memcpy with structure assignment
exfat: remove useless directory scan in exfat_add_entry()
exfat: eliminate dead code in exfat_find()
exfat: use i_blocksize() to get blocksize
exfat: fix misspellings using codespell tool
The block layer provides special status codes when requests go beyond
the zone resource limits. Use these codes instead of the generic IOERR
for requests that exceed the max active or open limits the null_blk
device was configured with so that applications know how these special
conditions should be handled.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.
Therefore, let's move the qcom-cpr driver to the qcom directory.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Niklas Cassel <nks@flawful.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A couple of small fixes (loff_t overflow on 32bit, syzbot uninitialized
variable warning) and code cleanup (xen)
-----BEGIN PGP SIGNATURE-----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=ONeq
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"A couple of small fixes (loff_t overflow on 32bit, syzbot
uninitialized variable warning) and code cleanup (xen)"
* tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux:
net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid
9p/xen: Fix format argument warning
9P: Cast to loff_t before multiplying
Every close(io_uring) causes cancellation of all inflight requests
carrying ->files. That's not nice but was neccessary up until recently.
Now task->files removal is handled in the core code, so that part of
flush can be removed.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't need to check the new buffer size, and the return value
had confused resize_buffer_duplicate_size().
...
ret = ring_buffer_resize(trace_buf->buffer,
per_cpu_ptr(size_buf->data,cpu_id)->entries, cpu_id);
if (ret == 0)
per_cpu_ptr(trace_buf->data, cpu_id)->entries =
per_cpu_ptr(size_buf->data, cpu_id)->entries;
...
Link: https://lkml.kernel.org/r/20201019142242.11560-1-hqjagain@gmail.com
Cc: stable@vger.kernel.org
Fixes: d60da506cb ("tracing: Add a resize function to make one buffer equivalent to another buffer")
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We correctly set io-wq NUMA node affinities when the io-wq context is
setup, but if an entire node CPU set is offlined and then brought back
online, the per node affinities are broken. Ensure that we set them
again whenever a CPU comes online. This ensures that we always track
the right node affinity. The usual cpuhp notifiers are used to drive it.
Reported-by: Zhang Qiang <qiang.zhang@windriver.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By default, we set the passthru request allocation flag such that it
returns the error in the following code path and we fail the I/O when
BLK_MQ_REQ_NOWAIT is used for request allocation :-
nvme_alloc_request()
blk_mq_alloc_request()
blk_mq_queue_enter()
if (flag & BLK_MQ_REQ_NOWAIT)
return -EBUSY; <-- return if busy.
On some controllers using BLK_MQ_REQ_NOWAIT ends up in I/O error where
the controller is perfectly healthy and not in a degraded state.
Block layer request allocation does allow us to wait instead of
immediately returning the error when we BLK_MQ_REQ_NOWAIT flag is not
used. This has shown to fix the I/O error problem reported under
heavy random write workload.
Remove the BLK_MQ_REQ_NOWAIT parameter for passthru request allocation
which resolves this issue.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Clean up some confusing elements of nvmet_passthru_map_sg() by returning
early if the request is greater than the maximum bio size. This allows
us to drop the sg_cnt variable.
This should not result in any functional change but makes the code
clearer and more understandable. The original code allocated a truncated
bio then would return EINVAL when bio_add_pc_page() filled that bio. The
new code just returns EINVAL early if this would happen.
Fixes: c1fef73f79 ("nvmet: add passthru code to process commands")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvmet_passthru_map_sg() only supports mapping a single BIO, not a chain
so the effective maximum transfer should also be limitted by
BIO_MAX_PAGES (presently this works out to 1MB).
For PCI passthru devices the max_sectors would typically be more
limitting than BIO_MAX_PAGES, but this may not be true for all passthru
devices.
Fixes: c1fef73f79 ("nvmet: add passthru code to process commands")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When connecting a controller with a zero kato value using the following
command line
nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0
the warning below can be reproduced:
WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627 __queue_delayed_work+0x6d/0x90
with trace:
mod_delayed_work_on+0x59/0x90
nvmet_update_cc+0xee/0x100 [nvmet]
nvmet_execute_prop_set+0x72/0x80 [nvmet]
nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp]
nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp]
...
This is caused by queuing up an uninitialized work. Althrough the
keep-alive timer is disabled during allocating the controller (fixed in
0d3b6a8d21), ka_work still has a chance to run (called by
nvmet_start_ctrl).
Fixes: 0d3b6a8d21 ("nvmet: Disable keep-alive timer when kato is cleared to 0h")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Like commit 5611ec2b98 ("nvme-pci: prevent SK hynix PC400 from using
Write Zeroes command"), Sandisk Skyhawk has the same issue:
[ 6305.633887] blk_update_request: operation not supported error, dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
So also disable Write Zeroes command on Sandisk Skyhawk.
BugLink: https://bugs.launchpad.net/bugs/1899503
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The request's rq_disk isn't set for passthrough IO commands, so tracing
uses qid 0 for these which incorrectly decodes as an admin command. Use
the request_queue's queuedata instead since that value is always set for
the IO queues, and never set for the admin queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Ben Gardon