Commit Graph

10045 Commits

Author SHA1 Message Date
Ram Pai 2d4d4864ac [patch 6/7] vfs: mountinfo: add /proc/<pid>/mountinfo
[mszeredi@suse.cz] rewrite and split big patch into managable chunks

/proc/mounts in its current form lacks important information:

 - propagation state
 - root of mount for bind mounts
 - the st_dev value used within the filesystem
 - identifier for each mount and it's parent

It also suffers from the following problems:

 - not easily extendable
 - ambiguity of mountpoints within a chrooted environment
 - doesn't distinguish between filesystem dependent and independent options
 - doesn't distinguish between per mount and per super block options

This patch introduces /proc/<pid>/mountinfo which attempts to address
all these deficiencies.

Code shared between /proc/<pid>/mounts and /proc/<pid>/mountinfo is
extracted into separate functions.

Thanks to Al Viro for the help in getting the design right.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:05:03 -04:00
Miklos Szeredi a1a2c409b6 [patch 5/7] vfs: mountinfo: allow using process root
Allow /proc/<pid>/mountinfo to use the root of <pid> to calculate
mountpoints.

 - move definition of 'struct proc_mounts' to <linux/mnt_namespace.h>
 - add the process's namespace and root to this structure
 - pass a pointer to 'struct proc_mounts' into seq_operations

In addition the following cleanups are made:

 - use a common open function for /proc/<pid>/{mounts,mountstat}
 - surround namespace.c part of these proc files with #ifdef CONFIG_PROC_FS
 - make the seq_operations structures const

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:57 -04:00
Miklos Szeredi 719f5d7f0b [patch 4/7] vfs: mountinfo: add mount peer group ID
Add a unique ID to each peer group using the IDR infrastructure.  The
identifiers are reused after the peer group dissolves.

The IDR structures are protected by holding namepspace_sem for write
while allocating or deallocating IDs.

IDs are allocated when a previously unshared vfsmount becomes the
first member of a peer group.  When a new member is added to an
existing group, the ID is copied from one of the old members.

IDs are freed when the last member of a peer group is unshared.

Setting the MNT_SHARED flag on members of a subtree is done as a
separate step, after all the IDs have been allocated.  This way an
allocation failure can be cleaned up easilty, without affecting the
propagation state.

Based on design sketch by Al Viro.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:51 -04:00
Miklos Szeredi 73cd49ecdd [patch 3/7] vfs: mountinfo: add mount ID
Add a unique ID to each vfsmount using the IDR infrastructure.  The
identifiers are reused after the vfsmount is freed.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:45 -04:00
Miklos Szeredi 9d1bc60138 [patch 2/7] vfs: mountinfo: add seq_file_root()
Add a new function:

  seq_file_root()

This is similar to seq_path(), but calculates the path relative to the
given root, instead of current->fs->root.  If the path was unreachable
from root, then modify the root parameter to reflect this.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:38 -04:00
Ram Pai 6092d04818 [patch 1/7] vfs: mountinfo: add dentry_path()
[mszeredi@suse.cz] split big patch into managable chunks

Add the following functions:

  dentry_path()
  seq_dentry()

These are similar to d_path() and seq_path().  But instead of
calculating the path within a mount namespace, they calculate the path
from the root of the filesystem to a given dentry, ignoring mounts
completely.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:32 -04:00
Linus Torvalds 94bc891b00 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] get rid of __exit_files(), __exit_fs() and __put_fs_struct()
  [PATCH] proc_readfd_common() race fix
  [PATCH] double-free of inode on alloc_file() failure exit in create_write_pipe()
  [PATCH] teach seq_file to discard entries
  [PATCH] umount_tree() will unhash everything itself
  [PATCH] get rid of more nameidata passing in namespace.c
  [PATCH] switch a bunch of LSM hooks from nameidata to path
  [PATCH] lock exclusively in collect_mounts() and drop_collected_mounts()
  [PATCH] move a bunch of declarations to fs/internal.h
2008-04-22 18:28:34 -07:00
Linus Torvalds b24a31442e Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Fix platform driver hotplug/coldplug
  i2c: New driver for the SuperH Mobile I2C bus controller
  i2c/scx200_acb: Don't use 0 as NULL pointer
  i2c-bfin-twi: Fix mismatch in add timer and delete timer
  i2c-bfin-twi: Just let i2c-bfin-twi driver depends on BLACKFIN
  i2c-bfin-twi: Use simpler comment headers and strip out information that is maintained in the scm's log
  i2c-bfin-twi: Cleanup driver descriptions, versions and some module useful information
  i2c-bfin-twi: Add missing pin mux operation
  i2c-bfin-twi: Add platform_resource interface to support multi-port TWI controllers
  i2c-bfin-twi: Add repeat start feature to avoid break of a bundle of i2c master xfer operation
  i2c: Remove trailing whitespaces in busses/Kconfig
  i2c: Replace remaining __FUNCTION__ occurrences
  i2c: Renesas SH7760 I2C master driver
  i2c-dev: Split i2cdev_ioctl
  i2c-ibm_iic: Support building as an of_platform driver
  i2c-ibm_iic: Change the log levels
  i2c: Add platform driver on top of the new pca-algorithm
  i2c-algo-pca: Extend for future drivers
  i2c-algo-pca: Remove trailing whitespaces and unnecessary UTF
  i2c: Remove the algorithm drivers from the config menu
2008-04-22 13:59:30 -07:00
Linus Torvalds 03b883840c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: linux/{dlm,dlm_device}.h: cleanup for userspace
  dlm: common max length definitions
  dlm: move plock code from gfs2
  dlm: recover nodes that are removed and re-added
  dlm: save master info after failed no-queue request
  dlm: make dlm_print_rsb() static
  dlm: match signedness between dlm_config_info and cluster_set
2008-04-22 13:44:23 -07:00
Linus Torvalds 0d07a15bdb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Suppress hidinput for Samsung IR control
  HID: remove 60x GTCO devices from blacklist
  HID: export headers properly
  HID: WiseGroup 866 Dual Joypad needs output reports quirk
  HID: ThrustMaster FF driver is no longer experimental
  HID: Logitech diNovo Mini pad support
  HID: fix race between open() and disconnect() in usbhid
  HID: make hid_input_field and usbhid_modify_dquirk static
  HID: pass numbered reports properly to hidraw
  HID: fix misplaced rdesc quirk
  HID: force feedback driver for Logitech Rumblepad 2
  HID: move wait from hid to usbhid
  HID: make function from dbg_hid
  HID: fix sparse warnings
  HID: only dump report traffic with debug level 2
  HID: patch to add NOGET for DMI/Acomdata
  HID: Sunplus Wireless Desktop needs report descriptor fixup
  HID: quirk for MS Wireless Desktop Receiver (model 1028)
  HID: fixup fullspeed interval on highspeed Afatech DVB-T IR kbd
  HID: fix build failure in hiddev_ioctl with gcc 3.2
2008-04-22 13:43:46 -07:00
Linus Torvalds 62429f4340 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: (41 commits)
  udf: use crc_itu_t from lib instead of udf_crc
  udf: Fix compilation warnings when UDF debug is on
  udf: Fix bug in VAT mapping code
  udf: Add read-only support for 2.50 UDF media
  udf: Fix handling of multisession media
  udf: Mount filesystem read-only if it has pseudooverwrite partition
  udf: Handle VAT packed inside inode properly
  udf: Allow loading of VAT inode
  udf: Fix detection of VAT version
  udf: Silence warning about accesses beyond end of device
  udf: Improve anchor block detection
  udf: Cleanup anchor block detection.
  udf: Move processing of virtual partitions
  udf: Move filling of partition descriptor info into a separate function
  udf: Improve error recovery on mount
  udf: Cleanup volume descriptor sequence processing
  udf: fix anchor point detection
  udf: Remove declarations of arrays of size UDF_NAME_LEN (256 bytes)
  udf: Remove checking of existence of filename in udf_add_entry()
  udf: Mark udf_process_sequence() as noinline
  ...
2008-04-22 13:40:47 -07:00
Wolfram Sang 244fbbb81c i2c: Add platform driver on top of the new pca-algorithm
Tested on a blackfin.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:46 +02:00
Wolfram Sang c01b083105 i2c-algo-pca: Extend for future drivers
The separation between algorithm and adapter was unsharp at places. This was
partly hidden by the fact, that the ISA-driver allowed just one instance and
had all private data in static variables. This patch makes neccessary
preparations to add a platform driver on top of the algorithm, while still
supporting ISA. Note: Due to lack of hardware, the ISA-driver could not be
tested except that it builds.

Concerning the core struct i2c_algo_pca_data:

- A private data field was added, all hardware dependant data may go here.
  Similar to other algorithms, now a pointer to this data is passed to the
  adapter's functions. In order to make as less changes as possible to the
  ISA-driver, it leaves the private data empty and still only uses its static
  variables.

- A "reset_chip" function pointer was added; such a functionality must come
  from the adapter, not the algorithm.

- use a variable "i2c_clock" instead of a function pointer "get_clock",
  allowing for write access to a default in case a wrong value was supplied.

In the algorithm-file:

- move "i2c-pca-algo.h" into "linux/i2c-algo-pca.h"
- now using per_instance timeout values (i2c_adap->timeout)
- error messages specify the device, not only the driver name
- restructure initialization to easily support "i2c_add_numbered_adapter"
- drop "retries" and "own" (i2c address) as they were unused

(The state-machine for I2C-communication was not touched.)

In the ISA-driver:

- adapt to new algorithm

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22 22:16:46 +02:00
Mike Frysinger 0dd9154442 HID: export headers properly
I have people whining about using these headers in userspace, and they have
__KERNEL__ markings which implies they're supposed to be exported.  I also
added the required linux/types.h include to hidraw.h since it uses the __u##
kernel types.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Jiri Kosina <jikos@jikos.cz>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-04-22 11:34:59 +02:00
Oliver Neukum 69626f23bc HID: fix race between open() and disconnect() in usbhid
There is a window:

task A					task B
spin_lock_irq(&usbhid->inlock);	/* Sync with error handler */
usb_set_intfdata(intf, NULL);
spin_unlock_irq(&usbhid->inlock);
usb_kill_urb(usbhid->urbin);
usb_kill_urb(usbhid->urbout);
usb_kill_urb(usbhid->urbctrl);

del_timer_sync(&usbhid->io_retry);
cancel_work_sync(&usbhid->reset_work);

						if (!hid->open++) {
							res = usb_autopm_get_interface(usbhid->intf);
							if (res < 0) {
								hid->open--;
								return -EIO;
							}
						}
						if (hid_start_in(hid))

if (hid->claimed & HID_CLAIMED_INPUT)
	hidinput_disconnect(hid);

in which an open() to an already disconnected device will submit an URB
to an undead device. In case disconnect() was called by an ioctl, this'll
oops. Fix by introducing a new flag and checking it in hid_start_in().

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-04-22 11:34:58 +02:00
Adrian Bunk abdff0f774 HID: make hid_input_field and usbhid_modify_dquirk static
This patch makes the following needlessly global functions static:
- hid-core.c:hid_input_field()
- usbhid/hid-quirks.c:usbhid_modify_dquirk()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-04-22 11:34:58 +02:00
Anssi Hannula c17f9c901c HID: force feedback driver for Logitech Rumblepad 2
Add force feedback support for Logitech Rumblepad 2.

Tested-By: Edgar Simo <bobbens@gmail.com>
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-04-22 11:34:57 +02:00
Jiri Slaby 1d1bdd2000 HID: move wait from hid to usbhid
Since only place where this is used is usbhid, move it there.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-04-22 11:34:57 +02:00
Jiri Slaby 1b184cf37f HID: make function from dbg_hid
To check paramters even if debug is disabled, convert dbg_hid
to inline function with __attribute__(format) checking.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-04-22 11:34:57 +02:00
Jiri Kosina 5f1ab74f65 HID: Sunplus Wireless Desktop needs report descriptor fixup
This device has reports lower logical maximum compared to the real
usages for Zoom+ and Zoom- it emits.

This patch bumps the values in the report descriptor up, and also
adjusts HID_MAX_USAGE accordingly.

Reported-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-04-22 11:34:57 +02:00
Jim Duchek 974faac464 HID: quirk for MS Wireless Desktop Receiver (model 1028)
Microsoft's wireless desktop receiver (Model 1028) has a bug in the report
descriptor -- namely, in four seperate places it uses USAGE_MIN and _MAX when
it quite obviously doesn't intend to.

In other words, it reports that it has pretty much _everything_ in 'consumer'
and 'generic desktop'.  And then the X evdev driver believes I have a mouse
with 36 absolute axes and a huge pile of keys and buttons, when I in fact,
should have zero.  255/256 in three of the cases, and 0-1024 in another.

This patch fixes the report descriptor of this device before it enters the HID
parser.

Signed-off-by: Jim Duchek <jim.duchek@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-04-22 11:34:57 +02:00
Pekka Sarnila f345c37c37 HID: fixup fullspeed interval on highspeed Afatech DVB-T IR kbd
Many vendors highspeed devices give erroneously fullspeed interval value in
endpoint descriptor for interrupt endpoints. This quirk fixes up that by
recalculating the right value for highspeed device.

At the time of hid configuration this quirk calculates which highspeed interval
value gives same interval delay as, or next smaller then, what it would be if
the original value would be interpreted as fullspeed value. In subsequent urbs
that new value is used instead.

Forming the 'hid->name' in usb_hid_config() was moved up to accommodate more
descriptive printk reporting the fixup.

In this patch the quirk is set for one such device: Afatech DVB-T 2 infrared
HID-keyboard. It reports value 16 which means 4,069s in highspeed while
obviously 16ms was intended. In this case quirk calculates new value to be 8
which gives when interpreted as highspeed value 16ms as wanted. The behavior of
the device was verified to be what expected both before and after the patch.

Signed-off-by: Pekka Sarnila <sarnila@adit.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-04-22 11:34:56 +02:00
Al Viro 521b5d0c40 [PATCH] teach seq_file to discard entries
Allow ->show() return SEQ_SKIP; that will discard all
output from that element and move on.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-21 23:14:02 -04:00
Al Viro b5266eb4c8 [PATCH] switch a bunch of LSM hooks from nameidata to path
Namely, ones from namespace.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-21 23:13:23 -04:00
Al Viro 6d59e7f582 [PATCH] move a bunch of declarations to fs/internal.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-21 23:11:01 -04:00
Linus Torvalds e9b62693ae Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial: (24 commits)
  DOC:  A couple corrections and clarifications in USB doc.
  Generate a slightly more informative error msg for bad HZ
  fix typo "is" -> "if" in Makefile
  ext*: spelling fix prefered -> preferred
  DOCUMENTATION:  Use newer DEFINE_SPINLOCK macro in docs.
  KEYS:  Fix the comment to match the file name in rxrpc-type.h.
  RAID: remove trailing space from printk line
  DMA engine: typo fixes
  Remove unused MAX_NODES_SHIFT
  MAINTAINERS: Clarify access to OCFS2 development mailing list.
  V4L: Storage class should be before const qualifier (sn9c102)
  V4L: Storage class should be before const qualifier
  sonypi: Storage class should be before const qualifier
  intel_menlow: Storage class should be before const qualifier
  DVB: Storage class should be before const qualifier
  arm: Storage class should be before const qualifier
  ALSA: Storage class should be before const qualifier
  acpi: Storage class should be before const qualifier
  firmware_sample_driver.c: fix coding style
  MAINTAINERS: Add ati_remote2 driver
  ...

Fixed up trivial conflicts in firmware_sample_driver.c
2008-04-21 16:36:46 -07:00
Linus Torvalds 548453fd10 Merge branch 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block:
  block: fix blk_register_queue() return value
  block: fix memory hotplug and bouncing in block layer
  block: replace remaining __FUNCTION__ occurrences
  Kconfig: clean up block/Kconfig help descriptions
  cciss: fix warning oops on rmmod of driver
  cciss: Fix race between disk-adding code and interrupt handler
  block: move the padding adjustment to blk_rq_map_sg
  block: add bio_copy_user_iov support to blk_rq_map_user_iov
  block: convert bio_copy_user to bio_copy_user_iov
  loop: manage partitions in disk image
  cdrom: use kmalloced buffers instead of buffers on stack
  cdrom: make unregister_cdrom() return void
  cdrom: use list_head for cdrom_device_info list
  cdrom: protect cdrom_device_info list by mutex
  cdrom: cleanup hardcoded error-code
  cdrom: remove ifdef CONFIG_SYSCTL
2008-04-21 16:03:40 -07:00
Linus Torvalds bda0c0afa7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (42 commits)
  PCI: Change PCI subsystem MAINTAINER
  PCI: pci-iommu-iotlb-flushing-speedup
  PCI: pci_setup_bridge() mustn't be __devinit
  PCI: pci_bus_size_cardbus() mustn't be __devinit
  PCI: pci_scan_device() mustn't be __devinit
  PCI: pci_alloc_child_bus() mustn't be __devinit
  PCI: replace remaining __FUNCTION__ occurrences
  PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggered
  PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno()
  PCI: clean up resource alignment management
  PCI: aerdrv_acpi.c: remove unneeded NULL check
  PCI: Update VIA CX700 quirk
  PCI: Expose PCI VPD through sysfs
  PCI: iommu: iotlb flushing
  PCI: simplify quirk debug output
  PCI: iova RB tree setup tweak
  PCI: parisc: use generic pci_enable_resources()
  PCI: ppc: use generic pci_enable_resources()
  PCI: powerpc: use generic pci_enable_resources()
  PCI: ia64: use generic pci_enable_resources()
  ...
2008-04-21 15:58:35 -07:00
Linus Torvalds 904e0ab54b Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [HWRNG] omap: Minor updates
  [CRYPTO] kconfig: Ordering cleanup
  [CRYPTO] all: Clean up init()/fini()
  [CRYPTO] padlock-aes: Use generic setkey function
  [CRYPTO] aes: Export generic setkey
  [CRYPTO] api: Make the crypto subsystem fully modular
  [CRYPTO] cts: Add CTS mode required for Kerberos AES support
  [CRYPTO] lrw: Replace all adds to big endians variables with be*_add_cpu
  [CRYPTO] tcrypt: Change the XTEA test vectors
  [CRYPTO] tcrypt: Shrink the tcrypt module
  [CRYPTO] tcrypt: Change the usage of the test vectors
  [CRYPTO] api: Constify function pointer tables
  [CRYPTO] aes-x86-32: Remove unused return code
  [CRYPTO] tcrypt: Shrink speed templates
  [CRYPTO] tcrypt: Group common speed templates
  [CRYPTO] sha512: Rename sha512 to sha512_generic
  [CRYPTO] sha384: Hardware acceleration for s390
  [CRYPTO] sha512: Hardware acceleration for s390
  [CRYPTO] s390: Generic sha_update and sha_final
  [CRYPTO] api: Switch to proc_create()
2008-04-21 15:57:09 -07:00
Robert P. J. Day 37679011c5 Generate a slightly more informative error msg for bad HZ
Generate a slightly more informative error msg for bad HZ
 in include/linux/jiffies.h

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21 22:56:14 +00:00
Randy Dunlap 553a56726b skbuff: fix missing kernel-doc notation
Add kernel-doc notation for ndisc_nodetype:

Warning(linux-2.6.25-git2//include/linux/skbuff.h:340): No description found for parameter 'ndisc_nodetype'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21 15:51:36 -07:00
Linus Torvalds 9a64388d83 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits)
  [POWERPC] Fix compile breakage for 64-bit UP configs
  [POWERPC] Define copy_siginfo_from_user32
  [POWERPC] Add compat handler for PTRACE_GETSIGINFO
  [POWERPC] i2c: Fix build breakage introduced by OF helpers
  [POWERPC] Optimize fls64() on 64-bit processors
  [POWERPC] irqtrace support for 64-bit powerpc
  [POWERPC] Stacktrace support for lockdep
  [POWERPC] Move stackframe definitions to common header
  [POWERPC] Fix device-tree locking vs. interrupts
  [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const
  [POWERPC] Remove unused __max_memory variable
  [POWERPC] Simplify xics direct/lpar irq_host setup
  [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ()
  [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade()
  [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c
  [POWERPC] Use asm-generic/bitops/find.h in bitops.h
  [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup
  [POWERPC] 85xx: Fix the size of qe muram for MPC8568E
  [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier.
  [POWERPC] 86xx: mark functions static, other minor cleanups
  ...
2008-04-21 15:50:49 -07:00
Linus Torvalds e80ab411e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits)
  SCSI: convert struct class_device to struct device
  DRM: remove unused dev_class
  IB: rename "dev" to "srp_dev" in srp_host structure
  IB: convert struct class_device to struct device
  memstick: convert struct class_device to struct device
  driver core: replace remaining __FUNCTION__ occurrences
  sysfs: refill attribute buffer when reading from offset 0
  PM: Remove destroy_suspended_device()
  Firmware: add iSCSI iBFT Support
  PM: Remove legacy PM (fix)
  Kobject: Replace list_for_each() with list_for_each_entry().
  SYSFS: Explicitly include required header file slab.h.
  Driver core: make device_is_registered() work for class devices
  PM: Convert wakeup flag accessors to inline functions
  PM: Make wakeup flags available whenever CONFIG_PM is set
  PM: Fix misuse of wakeup flag accessors in serial core
  Driver core: Call device_pm_add() after bus_add_device() in device_add()
  PM: Handle device registrations during suspend/resume
  block: send disk "change" event for rescan_partitions()
  sysdev: detect multiple driver registrations
  ...

Fixed trivial conflict in include/linux/memory.h due to semaphore header
file change (made irrelevant by the change to mutex).
2008-04-21 15:49:58 -07:00
Linus Torvalds c3823c479e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: (25 commits)
  avr32: Add hardware power-down function call
  avr32: add include/asm-avr32/serial.h
  avr32: don't offer PARPORT_PC
  avr32: don't offer CONFIG_GEN_RTC
  avr32: don't offer CONFIG_RTC
  add include/asm-avr32/xor.h
  avr32: Remove two unused #defines from mm/init.c
  avr32: Implement set_rate(), set_parent() and mode() for pll1
  avr32: Generic clockevents support
  avr32: Move sleep code into mach-at32ap
  avr32: Use constants from sysreg.h in asm.h
  avr32: Delete mostly unused header asm/intc.h
  avr32: start clocksource cleanup
  avr32: pass i2c board info through at32_add_device_twi
  avr32: cleanup - use _AC macro to define PAGE_SIZE
  Generate raw keyboard codes for AVR32 architecture
  atmel_usba_udc: Add support for AT91CAP9 UDPHS
  atmel_usba_udc: Add missing kfree() in usba_udc_remove()
  atmel_usba_udc: move endpoint declarations into platform data.
  atmel_usba_udc: Kill GPIO_PIN_NONE
  ...
2008-04-21 15:44:57 -07:00
Linus Torvalds 5dfeaef895 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  hrtimer: optimize the softirq time optimization
  hrtimer: reduce calls to hrtimer_get_softirq_time()
  clockevents: fix typo in tick-broadcast.c
  jiffies: add time_is_after_jiffies and others which compare with jiffies
2008-04-21 15:43:43 -07:00
Linus Torvalds 429f731dea Merge branch 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc
* 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc:
  Deprecate the asm/semaphore.h files in feature-removal-schedule.
  Convert asm/semaphore.h users to linux/semaphore.h
  security: Remove unnecessary inclusions of asm/semaphore.h
  lib: Remove unnecessary inclusions of asm/semaphore.h
  kernel: Remove unnecessary inclusions of asm/semaphore.h
  include: Remove unnecessary inclusions of asm/semaphore.h
  fs: Remove unnecessary inclusions of asm/semaphore.h
  drivers: Remove unnecessary inclusions of asm/semaphore.h
  net: Remove unnecessary inclusions of asm/semaphore.h
  arch: Remove unnecessary inclusions of asm/semaphore.h
2008-04-21 15:41:27 -07:00
Linus Torvalds 85b375a613 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (212 commits)
  [ARM] pxa: Phycore pcm-990-specific code for the PXA270 Quick Capture driver
  [ARM] pxa: V4L2 soc_camera driver for PXA270
  [ARM] pxa: restrict availability of pxa2xx PCMCIA drivers
  [ARM] 5005/1: BAST: Fix kset_name initialiser
  [ARM] 4967/1: Adds functions to set clkout rate for Samsung S3C2410
  [ARM] 4988/1: Add GPIO lib support to the EP93xx
  [ARM] Add initial sparsemem support
  [ARM] pxa: initialise PXA devices before platform init code
  [ARM] 5002/1: tosa: add two more leds
  [ARM] 5004/1: Tosa: make several unreferenced structures static.
  [ARM] 5003/1: Shut up sparse warnings
  [ARM] 4977/2: soc - pxa2xx-ac97 - Add missing clk_enable()
  [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line
  [ARM] 4974/1: Drop unused leds-tosa.
  [ARM] 4973/1: Tosa: use leds-gpio driver.
  [ARM] 4972/1: Tosa: convert scoop GPIOs usage to generic gpio code
  [ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks
  [ARM] pxa: lubbock: move mis-placed SPI info
  [ARM] 4970/1: tosa: correct gpio used for wake up.
  [ARM] 4966/1: magician: add MFP pin configuration
  ...
2008-04-21 15:40:55 -07:00
Linus Torvalds ec965350bb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel: (62 commits)
  sched: build fix
  sched: better rt-group documentation
  sched: features fix
  sched: /debug/sched_features
  sched: add SCHED_FEAT_DEADLINE
  sched: debug: show a weight tree
  sched: fair: weight calculations
  sched: fair-group: de-couple load-balancing from the rb-trees
  sched: fair-group scheduling vs latency
  sched: rt-group: optimize dequeue_rt_stack
  sched: debug: add some debug code to handle the full hierarchy
  sched: fair-group: SMP-nice for group scheduling
  sched, cpuset: customize sched domains, core
  sched, cpuset: customize sched domains, docs
  sched: prepatory code movement
  sched: rt: multi level group constraints
  sched: task_group hierarchy
  sched: fix the task_group hierarchy for UID grouping
  sched: allow the group scheduler to have multiple levels
  sched: mix tasks and groups
  ...
2008-04-21 15:40:24 -07:00
Sebastian Siewior 8a5703f846 DMA engine: typo fixes
Spelling fixes for dmaengine.[ch]

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21 22:38:45 +00:00
Linus Torvalds 5f033bb9bc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (77 commits)
  x86: UV startup of slave cpus
  x86: integrate pci-dma.c
  x86: don't do dma if mask is NULL.
  x86: return conditional to mmu
  x86: remove kludge from x86_64
  x86: unify gfp masks
  x86: retry allocation if failed
  x86: don't try to allocate from DMA zone at first
  x86: use a fallback dev for i386
  x86: use numa allocation function in i386
  x86: remove virt_to_bus in pci-dma_64.c
  x86: adjust dma_free_coherent for i386
  x86: move bad_dma_address
  x86: isolate coherent mapping functions
  x86: move dma_coherent functions to pci-dma.c
  x86: merge iommu initialization parameters
  x86: merge dma_supported
  x86: move pci fixup to pci-dma.c
  x86: move x86_64-specific to common code.
  x86: move initialization functions to pci-dma.c
  ...
2008-04-21 15:38:43 -07:00
Linus Torvalds fd9be4ce2e Merge branch 'ro-bind.b6' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'ro-bind.b6' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (24 commits)
  [PATCH] r/o bind mounts: debugging for missed calls
  [PATCH] r/o bind mounts: honor mount writer counts at remount
  [PATCH] r/o bind mounts: track numbers of writers to mounts
  [PATCH] r/o bind mounts: check mnt instead of superblock directly
  [PATCH] r/o bind mounts: elevate count for xfs timestamp updates
  [PATCH] r/o bind mounts: make access() use new r/o helper
  [PATCH] r/o bind mounts: write counts for truncate()
  [PATCH] r/o bind mounts: elevate write count for chmod/chown callers
  [PATCH] r/o bind mounts: elevate write count for open()s
  [PATCH] r/o bind mounts: elevate write count for ioctls()
  [PATCH] r/o bind mounts: write count for file_update_time()
  [PATCH] r/o bind mounts: elevate write count for do_utimes()
  [PATCH] r/o bind mounts: write counts for touch_atime()
  [PATCH] r/o bind mounts: elevate write count for ncp_ioctl()
  [PATCH] r/o bind mounts: elevate write count for xattr_permission() callers
  [PATCH] r/o bind mounts: get write access for vfs_rename() callers
  [PATCH] r/o bind mounts: write counts for link/symlink
  [PATCH] r/o bind mounts: get callers of vfs_mknod/create/mkdir()
  [PATCH] r/o bind mounts: elevate write count for rmdir and unlink.
  [PATCH] r/o bind mounts: drop write during emergency remount
  ...
2008-04-21 15:38:14 -07:00
Johannes Weiner 218ff137bc Remove unused MAX_NODES_SHIFT
MAX_NODES_SHIFT is not referenced anywhere in the tree, so dump it.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21 22:35:29 +00:00
Mike Frysinger c1c76743e9 dlm: linux/{dlm,dlm_device}.h: cleanup for userspace
linux/dlm_device.h uses types from dlm.h and types.h, so pull them in.  The
dlm.h header should use __u## rather than uint##_t types and thus pull in
linux/types.h for it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21 11:35:39 -05:00
David Teigland 3d564fa347 dlm: common max length definitions
Add central definitions for max lockspace name length and max resource
name length.  The lack of central definitions has resulted in scattered
private definitions which we can now clean up, including an unused one
in dlm_device.h.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21 11:22:29 -05:00
David Teigland 2402211a83 dlm: move plock code from gfs2
Move the code that handles cluster posix locks from gfs2 into the dlm
so that it can be used by both gfs2 and ocfs2.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21 11:22:28 -05:00
Linus Torvalds cc216c5d42 Fix RCU list iterator use of 'rcu_dereference()'
The RCU iterators used 'rcu_dereference()' on an already-fetched RCU
pointer value, which defeats the whole point of the exercise.

When we dereference a pointer protected by RCU, we need to make sure
that we only fetch the value _once_, because if the compiler ends up
re-loading it due to register pressure, the newly reloaded value could
be different from the previously fetched one, and you get inconsistent
results.

Cleaned-up, fixed, and the pointless list_for_each_safe_rcu #define
deleted by Paul Kenney.

Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21 08:23:35 -07:00
Andi Kleen 2472892a3c block: fix memory hotplug and bouncing in block layer
Only noticed this while hacking something else, no test case.

blk_max_low_pfn is initialized once at bootup by the block layer from
max_low_pfn.  But max_low_pfn is not necessarily constant over the runtime of
the system when you consider memory hotplug.  What could happen if that
someone adds memory later the block layer wouldn't get updated and then start
bouncing memory unnecessarily.

Also on 64bit blk_max_low_pfn actually isn't needed because it just disables
bouncing essentially and there is no highmem.  And nobody can pass pfns >
max_low_pfn to the block layer, because those wouldn't have a struct page and
I suspect block layer wouldn't be very happy without that.

So set BLK_BOUNCE_HIGH to infinity (-1ULL) on 64bit.  That avoids the problem
of having to update it on memory hotadd.

On 32bit I kept the same behaviour because at least on i386
memory hotadd only adds HIGHMEM, never lowmem.

BLK_BOUNCE_ANY is always set to infinity on both 32 and 64bit.

Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21 09:51:05 +02:00
FUJITA Tomonori f18573abcc block: move the padding adjustment to blk_rq_map_sg
blk_rq_map_user adjusts bi_size of the last bio. It breaks the rule
that req->data_len (the true data length) is equal to sum(bio). It
broke the scsi command completion code.

commit e97a294ef6 was introduced to fix
the above issue. However, the partial completion code doesn't work
with it. The commit is also a layer violation (scsi mid-layer should
not know about the block layer's padding).

This patch moves the padding adjustment to blk_rq_map_sg (suggested by
James). The padding works like the drain buffer. This patch breaks the
rule that req->data_len is equal to sum(sg), however, the drain buffer
already broke it. So this patch just restores the rule that
req->data_len is equal to sub(bio) without breaking anything new.

Now when a low level driver needs padding, blk_rq_map_user and
blk_rq_map_user_iov guarantee there's enough room for padding.
blk_rq_map_sg can safely extend the last entry of a scatter list.

blk_rq_map_sg must extend the last entry of a scatter list only for a
request that got through bio_copy_user_iov. This patches introduces
new REQ_COPY_USER flag.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21 09:50:08 +02:00
FUJITA Tomonori c5dec1c303 block: convert bio_copy_user to bio_copy_user_iov
This patch enables bio_copy_user to take struct sg_iovec (renamed
bio_copy_user_iov). bio_copy_user uses bio_copy_user_iov internally as
bio_map_user uses bio_map_user_iov.

The major changes are:

- adds sg_iovec array to struct bio_map_data

- adds __bio_copy_iov that copy data between bio and
sg_iovec. bio_copy_user_iov and bio_uncopy_user use it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21 09:50:08 +02:00
Akinobu Mita 0a0c4114df cdrom: make unregister_cdrom() return void
Now unregister_cdrom() always returns 0.
Make it return void and update all callers that check the return value.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21 09:50:08 +02:00