Commit Graph

59 Commits

Author SHA1 Message Date
Paul Mundt 9d56dd3b08 sh: Mass ctrl_in/outX to __raw_read/writeX conversion.
The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-26 12:58:40 +09:00
Paul Mundt 2dc2f8e0c4 sh: Kill off the special uncached section and fixmap.
Now that cached_to_uncached works as advertized in 32-bit mode and we're
never going to be able to map < 16MB anyways, there's no need for the
special uncached section. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-21 16:05:25 +09:00
Matt Fleming b4c8927623 sh: Optimise flush_dcache_page() on SH4
If the page is not mapped into any process's address space then aliases
cannot exist in the cache. So reduce the amount of flushing we perform.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2010-01-02 00:51:52 +00:00
Matt Fleming e717cc6c07 sh: Can't compare physical and virtual addresses for aliases
It does not make sense to compare virtual and physical addresses for
aliasing, only virtual addresses can be compared for aliases.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09 12:34:46 +09:00
Matt Fleming a781d1e5ff sh: Drop associative writes for SH-4 cache flushes.
When flushing/invalidating the icache/dcache via the memory-mapped IC/OC
address arrays, the associative bit should only be used in conjunction with
virtual addresses. However, we currently flush cache lines based on physical
address, so stop using the associative bit.

It is a better strategy to use non-associative writes (and physical tags) for
flushing the caches anyway, because flushing by virtual address (as with the
A-bit set) requires a valid TLB entry for that virtual address. If one does not
exist in the TLB no exception is generated and the flush is silently ignored.

This is also future-proofing for SH-4A parts which are gradually phasing out
associative writes to the cache array due to the aforementioned case of certain
flushes silently turning in to nops.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-04 16:18:11 +09:00
Paul Mundt 76d2318020 Merge branch 'sh/stable-updates' 2009-11-09 10:55:36 +09:00
Matt Fleming a9d244a2ff sh: Account for cache aliases in flush_icache_range()
The icache may also contain aliases so we must account for them just
like we do when manipulating the dcache. We usually get away with
aliases in the icache because the instructions that are read from memory
are read-only, i.e. they never change. However, the place where this
bites us is when the code has been modified.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-09 10:45:30 +09:00
Matt Fleming eb3118f652 sh: Do not apply virt_to_phys() to a physical address
The variable 'phys' already contains the physical address to flush. It
is not a virtual address and should not be passed to virt_to_phys().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:53:22 +09:00
Paul Mundt abeaf33a41 Merge branch 'sh/stable-updates'
Conflicts:
	arch/sh/mm/cache-sh4.c
2009-10-16 15:14:50 +09:00
Valentin Sitdikov a7a7c0e1d1 sh: Fix up single page flushing to use PAGE_SIZE.
Presently The SH-4 cache flushing code uses flush_cache_4096() for most
of the real flushing work, which breaks down to a fixed 4096 unroll and
increment. Not only is this sub-optimal for larger page sizes, it's also
uncovered a bug in sh4_flush_dcache_page() when large page sizes are used
and we have no cache aliases -- resulting in only a part of the page's
D-cache lines being written back.

Signed-off-by: Valentin Sitdikov <valentin.sitdikov@siemens.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 14:15:38 +09:00
Matt Fleming 1f69b6af91 sh: Prepare for dynamic PMB support
To allow the MMU to be switched between 29bit and 32bit mode at runtime
some constants need to swapped for functions that return a runtime
value.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:12 +09:00
Matt Fleming 8bd642b17b sh: Obliterate the P1 area macros
Replace the use of PHYSADDR() with __pa(). PHYSADDR() is based on the
idea that all addresses in P1SEG are untranslated, so we can access an
address's physical page as an offset from P1SEG. This doesn't work for
CONFIG_PMB/CONFIG_PMB_FIXED because pages in P1SEG and P2SEG are used
for PMB mappings and so can be translated to any physical address.

Likewise, replace a P1SEGADDR() use with virt_to_phys().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:02 +09:00
Paul Mundt 5e3679c594 Merge branch 'sh/cachetlb' 2009-10-10 21:36:53 +09:00
Matt Fleming a6325247f5 sh: Sprinkle __uses_jump_to_uncached
Fix some callers of jump_to_uncached() and back_to_cached() that were
not annotated with __uses_jump_to_uncached.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:23:57 +09:00
Paul Mundt c4845a4b22 sh: Fix up redundant cache flushing for PAGE_SIZE > 4k.
If PAGE_SIZE is presently over 4k we do a lot of extra flushing given
that we purge the cache 4k at a time. Make it explicitly 4k per
iteration, rather than iterating for PAGE_SIZE before looping over again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09 17:13:07 +09:00
Paul Mundt deaef20e97 sh: Rework sh4_flush_cache_page() for coherent kmap mapping.
This builds on top of the MIPS r4k code that does roughly the same thing.
This permits the use of kmap_coherent() for mapped pages with dirty
dcache lines and falls back on kmap_atomic() otherwise.

This also fixes up a problem with the alias check and defers to
shm_align_mask directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09 16:06:39 +09:00
Paul Mundt bd6df57481 sh: Kill off segment-based d-cache flushing on SH-4.
This kills off the unrolled segment based flushers on SH-4 and switches
over to a generic unrolled approach derived from the writethrough segment
flusher.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09 14:22:15 +09:00
Paul Mundt 31c9efde78 sh: Kill off broken PHYSADDR() usage in sh4_flush_dcache_page().
PHYSADDR() runs in to issues in 32-bit mode when we do not have the
legacy P1/P2 areas mapped, as such, we need to use page_to_phys()
directly, which also happens to do the right thing in legacy 29-bit mode.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09 14:10:28 +09:00
Paul Mundt 654d364e26 sh: sh4_flush_cache_mm() optimizations.
The i-cache flush in the case of VM_EXEC was added way back when as a
sanity measure, and in practice we only care about evicting aliases from
the d-cache. As a result, it's possible to drop the i-cache flush
completely here.

After careful profiling it's also come up that all of the work associated
with hunting down aliases and doing ranged flushing ends up generating
more overhead than simply blasting away the entire dcache, particularly
if there are many mm's that need to be iterated over. As a result of
that, just move back to flush_dcache_all() in these cases, which restores
the old behaviour, and vastly simplifies the path.

Additionally, on platforms without aliases at all, this can simply be
nopped out. Presently we have the alias check in the SH-4 specific
version, but this is true for all of the platforms, so move the check up
to a generic location. This cuts down quite a bit on superfluous cacheop
IPIs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09 14:04:06 +09:00
Paul Mundt 682f88ab74 sh: Cleanup whitespace damage in sh4_flush_icache_range().
There was quite a lot of tab->space damage done here from a former patch,
clean it up once and for all.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09 13:19:46 +09:00
Paul Mundt 983f4c514c Revert "sh: Kill off now redundant local irq disabling."
This reverts commit 64a6d72213.

Unfortunately we can't use on_each_cpu() for all of the cache ops, as
some of them only require preempt disabling. This seems to be the same
issue that impacts the mips r4k caches, where this code was based on.
This fixes up a deadlock that showed up in some IRQ context cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01 21:12:55 +09:00
Paul Mundt ac6a0cf671 Merge branch 'master' into sh/smp
Conflicts:
	arch/sh/mm/cache-sh4.c
2009-09-01 13:54:14 +09:00
Matt Fleming ce3f7cb96e sh: Fix dcache flushing for N-way write-through caches.
This adopts the special-cased 2-way write-through dcache flusher for
N-ways and moves it in to the generic path. Assignment is done at runtime
via the check for the CCR_CACHE_WT bit in the same path as the per-way
writeback flushers.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01 13:32:48 +09:00
Paul Mundt e76a0136a3 sh: Fix up sh4_flush_dcache_page() build on UP.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:31:16 +09:00
Stuart Menefy ffad9d7a54 sh: Fix problems with cache flushing when cache is in write-through mode
Change the method used to flush the cache in write-through mode to
avoid corrupted data being written back to memory.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 18:39:39 +09:00
Stuart Menefy a5cf9e2444 sh: Improve comments int SH4 cache flushing code
This is a pure documentation, to try to explain why the cache flushing code
for the SH4 is implemented the way it is.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 17:36:24 +09:00
Paul Mundt 64a6d72213 sh: Kill off now redundant local irq disabling.
on_each_cpu() takes care of IRQ and preempt handling, the localized
handling in each of the called functions can be killed off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21 18:21:07 +09:00
Paul Mundt f26b2a562b sh: Make cache flushers SMP-aware.
This does a bit of rework for making the cache flushers SMP-aware. The
function pointer-based flushers are renamed to local variants with the
exported interface being commonly implemented and wrapping as necessary.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21 17:23:14 +09:00
Paul Mundt c139a59587 sh: Fix up cache-sh4 build on SMP.
mapping is unused on the SMP build, trigger a build error. Move it under
the ifdef.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20 15:24:41 +09:00
Paul Mundt 37443ef3f0 sh: Migrate SH-4 cacheflush ops to function pointers.
This paves the way for allowing individual CPUs to overload the
individual flushing routines that they care about without having to
depend on weak aliases. SH-4 is converted over initially, as it wires
up pretty much everything. The majority of the other CPUs will simply use
the default no-op implementation with their own region flushers wired up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15 12:29:49 +09:00
Paul Mundt 916e97834e sh: Kill off unused flush_icache_user_range().
We use flush_cache_page() outright in copy_to_user_page(), and nothing
else needs it, so just kill it off. SH-5 still defines its own version,
but that too will go away in the same fashion once it converts over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15 11:38:05 +09:00
Paul Mundt 0b445dcaf3 sh: Don't export flush_dcache_all().
flush_dcache_all() is used internally by the SH-4 cache code, it is not
part of the exported cache API, so make it static and don't export it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15 11:22:50 +09:00
Paul Mundt 27d59ec170 sh: Move alias computation to shared cache init.
This migrates the alias computation and printing of probed cache
parameters from the SH-4 code to the shared cpu_cache_init().

This permits other platforms with aliases to make use of the same
probe logic without having to roll their own, and also produces
consistent output regardless of platform.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15 11:11:16 +09:00
Paul Mundt ecba106058 sh: Centralize the CPU cache initialization routines.
This provides a central point for CPU cache initialization routines.
This replaces the antiquated p3_cache_init() method, which the vast
majority of CPUs never cared about.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15 11:05:42 +09:00
Paul Mundt e7b8b7f16e sh: NO_CONTEXT ASID optimizations for SH-4 cache flush.
This optimizes for the cases when a CPU does not yet have a valid ASID
context associated with it, as in this case there is no work for any of
flush_cache_mm()/flush_cache_page()/flush_cache_range() to do. Based on
the the MIPS implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15 02:21:16 +09:00
Paul Mundt 8174252752 sh: Split out SH-4 __flush_xxx_region() ops.
This splits out the SH-4 __flush_xxx_region() functions and defines them
as weak symbols. This allows us to provide optimized versions without
having to ifdef cache-sh4.c to death.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04 18:06:01 +09:00
Paul Mundt 2277ab4a1d sh: Migrate from PG_mapped to PG_dcache_dirty.
This inverts the delayed dcache flush a bit to be more in line with other
platforms. At the same time this also gives us the ability to do some
more optimizations and cleanup. Now that the update_mmu_cache() callsite
only tests for the bit, the implementation can gradually be split out and
made generic, rather than relying on special implementations for each of
the peculiar CPU types.

SH7705 in 32kB mode and SH-4 still need slightly different handling, but
this is something that can remain isolated in the varying page copy/clear
routines. On top of that, SH-X3 is dcache coherent, so there is no need
to bother with any of these tests in the PTEAEX version of
update_mmu_cache(), so we kill that off too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-22 19:20:49 +09:00
Paul Mundt 205a3b4328 sh: uninline flush_icache_all().
This uses jump_to_uncached() which is now given the noinline attribute
due to the special section mapping. Kill off the inline attribute to
fix up compilation failure.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08 10:35:06 +09:00
Chris Smith 09b5a10c19 sh: Optimized flush_icache_range() implementation.
Add implementation of flush_icache_range() suitable for signal handler
and kprobes. Remove flush_cache_sigtramp() and change signal.c to use
flush_icache_range().

Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:32 +09:00
Stuart Menefy cbaa118ecf sh: Preparation for uncached jumps through PMB.
Presently most of the 29-bit physical parts do P1/P2 segmentation
with a 1:1 cached/uncached mapping, jumping between the two to
control the caching behaviour. This provides the basic infrastructure
to maintain this behaviour on 32-bit physical parts that don't map
P1/P2 at all, using a shiny new linker section and corresponding
fixmap entry.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:59 +09:00
Paul Mundt ab27f62002 sh: Calculate cache aliases on L2 caches.
Calculate the number of cache aliases on probed L2 caches, and while
we're at it, print out the detected statistics at boot time for these
also.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24 17:00:45 +09:00
Paul Mundt d10040f7eb sh: Fix alias calculation for non-aliasing cases.
There was an off-by-1 on the cache alias detection logic on SH-4,
which caused n_aliases to always be 1 even when the page size
precluded the existence of aliases.

With this corrected, 64KB pages happily reports n_aliases == 0, and
hits the appropriate fast paths in the flushing routines.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24 16:38:25 +09:00
Paul Mundt 7ec9d6f8c0 sh: Avoid smp_processor_id() in cache desc paths.
current_cpu_data uses smp_processor_id() in order to find the
corresponding cpu_data. As the cache descs are all currently
identical, just have this look at probed results from the boot
CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 18:05:20 +09:00
Paul Mundt f0b859e3d6 sh: Reclaim beginning of P3 space for vmalloc area.
The first 1MB of P3 space was reserved and used for page colouring,
as we've reworked that to use fixmaps, we can reclaim the space and
hand it back to VMALLOC_START.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25 10:43:47 +09:00
Paul Mundt 8cf1a74305 sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.
This wires up kmap_coherent() and kunmap_coherent() on SH-4, and
moves away from the p3map_mutex and reserved P3 space, opting to
use fixmaps for colouring instead.

The copy_user_page()/clear_user_page() implementations are moved
to this, which fixes the nasty blowups with spinlock debugging
as a result of having some of these calls nested under the page
table lock.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-24 13:28:26 +09:00
Paul Mundt 39e688a94b sh: Revert lazy dcache writeback changes.
These ended up causing too many problems on older parts,
revert for now..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05 19:46:47 +09:00
Paul Mundt 11c1965687 sh: Fixup cpu_data references for the non-boot CPUs.
There are a lot of bogus cpu_data-> references that only end up working
for the boot CPU, convert these to current_cpu_data to fixup SMP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt 26b7a78c55 sh: Lazy dcache writeback optimizations.
This converts the lazy dcache handling to the model described in
Documentation/cachetlb.txt and drops the ptep_get_and_clear() hacks
used for the aliasing dcaches on SH-4 and SH7705 in 32kB mode. As a
bonus, this slightly cuts down on the cache flushing frequency.

With that and the PTEA handling out of the way, the update_mmu_cache()
implementations can be consolidated, and we no longer have to worry
about which configuration the cache is in for the SH7705 case.

And finally, explicitly disable the lazy writeback on SMP (SH-4A).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Paul Mundt 37bda1da45 sh: Convert remaining remap_area_pages() users to ioremap_page_range().
A couple of these were missed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Paul Mundt 510c72ad2d sh: Fixup various PAGE_SIZE == 4096 assumptions.
There were a number of places that made evil PAGE_SIZE == 4k
assumptions that ended up breaking when trying to play with
8k and 64k page sizes, this fixes those up.

The most significant change is the way we load THREAD_SIZE,
previously this was done via:

	mov	#(THREAD_SIZE >> 8), reg
	shll8	reg

to avoid a memory access and allow the immediate load. With
a 64k PAGE_SIZE, we're out of range for the immediate load
size without resorting to special instructions available in
later ISAs (movi20s and so on). The "workaround" for this is
to bump up the shift to 10 and insert a shll2, which gives a
bit more flexibility while still being much cheaper than a
memory access.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00