Includes some timer fixes, properly unmapping PTEs, an errata fix, and two
tweaks to the EL2 panic code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWVJ7gAAoJEEtpOizt6ddyD5MH/3M/nhtZTnT6v0RPDvHWJo7s
5BQmITJYPHFkTO14OHWTVLXiGgLws8gPZnWHxC4jjHjpuJnL+/MM551FpCOqDDd7
vweYgVlSqD8ANH5nKbv1PPnzjrqhTVN+yi3ZItXy2pxsfvu63FC6Z43B2axelLvw
XYmHoMZaeWBBw2gHi3djGfju3Yj/2SOe+ozuvAXpxA5+NhSiPHHnMefGy5k3wKnJ
sETwshPdjiMeK4ItfMhveFTDRjl4uh9uQyORfaa5gqG0uePt3EalYynw+gEjZ6RX
Bpc3nLwboIfRIa/WwyoHm+nmLIUYjU8dAgLwUOIbdeG0igpdALdvsB0aBHCgngk=
=+7ED
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/ARM Fixes for v4.4-rc3.
Includes some timer fixes, properly unmapping PTEs, an errata fix, and two
tweaks to the EL2 panic code.
For now, VCPUs were always created sequentially with incrementing
VCPU ids. Therefore, the index in the VCPUs array matched the id.
As sequential creation might change with cpu hotplug, let's use
the correct lookup function to find a VCPU by id, not array index.
Let's also use kvm_lookup_vcpu() for validation of the sending VCPU
on external call injection.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # db27a7a KVM: Provide function for VCPU lookup by id
Commit 383d0b0501 ("KVM: s390: handle pending local interrupts via
bitmap") introduced a possible memory overwrite from user space.
User space could pass an invalid emergency signal code (sending VCPU)
and therefore exceed the bitmap. Let's take care of this case and
check that the id is in the valid range.
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v3.19+ db27a7a KVM: Provide function for VCPU lookup by id
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The pfmf intercept handler should check if the EDAT 1 facility
is installed in the guest, not if it is installed in the host.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We should never allow to enable/disable any facilities for the guest
when other VCPUs were already created.
kvm_arch_vcpu_(load|put) relies on SIMD not changing during runtime.
If somebody would create and run VCPUs and then decides to enable
SIMD, undefined behaviour could be possible (e.g. vector save area
not being set up).
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # 4.1+
There is no known user, therefore remove the code.
Acked-by: Rob Van Der Heij <robvdheij@nl.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Passes mlock2-tests test case in 64 bit and compat mode.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove dead code, since this could only happen on a 31 bit machine
where the kernel wouldn't IPL.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
commit 1f6b83e5e4 ("s390: avoid z13 cache aliasing") checks for the
machine type to optimize address space randomization and zero page
allocation to avoid cache aliases.
This check might fail under a hypervisor with migration support.
z/VMs "Single System Image and Live Guest Relocation" facility will
"fake" the machine type of the oldest system in the group. For example
in a group of zEC12 and Z13 the guest appears to run on a zEC12
(architecture fencing within the relocation domain)
Remove the machine type detection and always use cache aliasing
rules that are known to work for all machines. These are the z13
aliasing rules.
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There's no reason to clear all PSW mask bits other than the addressing
mode bits. Just use the previous PSW mask as-is.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Allow to ipl from CCW based devices residing in any subchannel set.
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The input buffer in reipl_fcp_scpdata_write is accessed out of bounds
when an offset is specified. The problem is that the offset refers to
the data we should write to and not to the buffer we read from.
So instead of
memcpy(scp_data, buf + off, count);
we could just do
memcpy(scp_data + off, buf, count);
However we not only modify the data but also store its length. For this to
work we'd need to remember a state per open FH. Since that's not possible
with sysfs callbacks let's just fail when an offset is specified.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Improve debugging to find out what went wrong during a failed
dma map/unmap operation.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We use lazy allocation for translation table entries but don't handle
allocation (and other) failures during translation table updates.
Handle these failures and undo translation table updates when it's
meaningful.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Newly allocated translation table entries are flagged as invalid
and protected. If an existing translation table entry is invalidated,
the protection flag is left unchanged.
If a page (with invalid and protection flag set) is accessed it's
undefined which type of exception we'll receive.
Make sure to always set the invalid flag only.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Explicitly write the system call number for each define instead of
calculating it. This makes it easier to parse the file when generating
system call tables for various tools and libraries.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Documentation/trace/tracepoints.txt states that the naming scheme
for tracepoints is "subsys_event" to avoid collisions. Rename
the 'diagnose' tracepoint to 's390_diagnose'.
Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
startup calls the C function _sclp_print_early() if the machine we're
running on is not supported by the kernel. sclp.c is getting built
with -m64, so _sclp_print_early() expects the zSeries ELF ABI to be
used.
We previously called _sclp_print_early() using the S/390 ELF ABI, with
a stack frame size of 96 bytes and while being in 31-bit address
mode. This caused _sclp_wait_int() (called indirectly from
_sclp_print_early()) to jump to an undefined address. While
_sclp_wait_int() contained some code to deal with being called in
31-bit addressing mode, it didn't quite work. While fixing this is
possible, the code would still only work by chance and could break any
time.
Ensure compliance with the zSeries ELF ABI by switching to 64-bit
addressing mode early and using a minimum stack frame size of 160
bytes.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
handling.
PPC: Mostly bug fixes.
ARM: No big features, but many small fixes and prerequisites including:
- a number of fixes for the arch-timer
- introducing proper level-triggered semantics for the arch-timers
- a series of patches to synchronously halt a guest (prerequisite for
IRQ forwarding)
- some tracepoint improvements
- a tweak for the EL2 panic handlers
- some more VGIC cleanups getting rid of redundant state
x86: quite a few changes:
- support for VT-d posted interrupts (i.e. PCI devices can inject
interrupts directly into vCPUs). This introduces a new component (in
virt/lib/) that connects VFIO and KVM together. The same infrastructure
will be used for ARM interrupt forwarding as well.
- more Hyper-V features, though the main one Hyper-V synthetic interrupt
controller will have to wait for 4.5. These will let KVM expose Hyper-V
devices.
- nested virtualization now supports VPID (same as PCID but for vCPUs)
which makes it quite a bit faster
- for future hardware that supports NVDIMM, there is support for clflushopt,
clwb, pcommit
- support for "split irqchip", i.e. LAPIC in kernel + IOAPIC/PIC/PIT in
userspace, which reduces the attack surface of the hypervisor
- obligatory smattering of SMM fixes
- on the guest side, stable scheduler clock support was rewritten to not
require help from the hypervisor.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJWO2IQAAoJEL/70l94x66D/K0H/3AovAgYmJQToZlimsktMk6a
f2xhdIqfU5lIQQh5uNBCfL3o9o8H9Py1ym7aEw3fmztPHHJYc91oTatt2UEKhmEw
VtZHp/dFHt3hwaIdXmjRPEXiYctraKCyrhaUYdWmUYkoKi7lW5OL5h+S7frG2U6u
p/hFKnHRZfXHr6NSgIqvYkKqtnc+C0FWY696IZMzgCksOO8jB1xrxoSN3tANW3oJ
PDV+4og0fN/Fr1capJUFEc/fejREHneANvlKrLaa8ht0qJQutoczNADUiSFLcMPG
iHljXeDsv5eyjMtUuIL8+MPzcrIt/y4rY41ZPiKggxULrXc6H+JJL/e/zThZpXc=
=iv2z
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"First batch of KVM changes for 4.4.
s390:
A bunch of fixes and optimizations for interrupt and time handling.
PPC:
Mostly bug fixes.
ARM:
No big features, but many small fixes and prerequisites including:
- a number of fixes for the arch-timer
- introducing proper level-triggered semantics for the arch-timers
- a series of patches to synchronously halt a guest (prerequisite
for IRQ forwarding)
- some tracepoint improvements
- a tweak for the EL2 panic handlers
- some more VGIC cleanups getting rid of redundant state
x86:
Quite a few changes:
- support for VT-d posted interrupts (i.e. PCI devices can inject
interrupts directly into vCPUs). This introduces a new
component (in virt/lib/) that connects VFIO and KVM together.
The same infrastructure will be used for ARM interrupt
forwarding as well.
- more Hyper-V features, though the main one Hyper-V synthetic
interrupt controller will have to wait for 4.5. These will let
KVM expose Hyper-V devices.
- nested virtualization now supports VPID (same as PCID but for
vCPUs) which makes it quite a bit faster
- for future hardware that supports NVDIMM, there is support for
clflushopt, clwb, pcommit
- support for "split irqchip", i.e. LAPIC in kernel +
IOAPIC/PIC/PIT in userspace, which reduces the attack surface of
the hypervisor
- obligatory smattering of SMM fixes
- on the guest side, stable scheduler clock support was rewritten
to not require help from the hypervisor"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (123 commits)
KVM: VMX: Fix commit which broke PML
KVM: x86: obey KVM_X86_QUIRK_CD_NW_CLEARED in kvm_set_cr0()
KVM: x86: allow RSM from 64-bit mode
KVM: VMX: fix SMEP and SMAP without EPT
KVM: x86: move kvm_set_irq_inatomic to legacy device assignment
KVM: device assignment: remove pointless #ifdefs
KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomic
KVM: x86: zero apic_arb_prio on reset
drivers/hv: share Hyper-V SynIC constants with userspace
KVM: x86: handle SMBASE as physical address in RSM
KVM: x86: add read_phys to x86_emulate_ops
KVM: x86: removing unused variable
KVM: don't pointlessly leave KVM_COMPAT=y in non-KVM configs
KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr()
KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings
KVM: arm/arm64: Optimize away redundant LR tracking
KVM: s390: use simple switch statement as multiplexer
KVM: s390: drop useless newline in debugging data
KVM: s390: SCA must not cross page boundaries
KVM: arm: Do not indent the arguments of DECLARE_BITMAP
...
This time including:
* A new IOMMU driver for s390 pci devices
* Common dma-ops support based on iommu-api for ARM64. The plan is to
use this as a basis for ARM32 and hopefully other architectures as
well in the future.
* MSI support for ARM-SMMUv3
* Cleanups and dead code removal in the AMD IOMMU driver
* Better RMRR handling for the Intel VT-d driver
* Various other cleanups and small fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJWOz7hAAoJECvwRC2XARrjbvYQALwtITTA5iTm0y/ApwNMxI7n
pZpjZVPoBPNsGBc4t/MT8pVhUSdmpBOljbV4Y4CayL1mSSB6Bl2gooZjd66m7Z81
qMJYEVWhFQqVsIKkCSNOgaO7W5y+xt3rTgqN6vCu86/CCDfKrTPP/+CRl1T/z9bo
1J8ioM3KnZG9KzG8JuXYFg5wwbKToaBh6swSmj+O4U9hru7zV/ILP7ikcc9pyMji
12WbzCqchRORsJZD65xMRYAqRaPNN/3IlDejs00TOFhY3qpWgEgFUucyeRJBJ/+q
K4U8T5vZsnr1a04l7/BeYbLmP7y/9Qv0N0xMGtTyoy/w/BieGqRWu4hHhqf/44NO
EhCSXcEThMNCGTjP2VWC4dnQ/s7Y8OmSW9nCreUcFVxHoE5LfDoh8RngA2fpeNuS
ixb3OwP+YXHN9Ck+1BQqQCeBznsPTLuDxlhRjCJsWntIfMSkXebOkz83YxyZ9b0Q
gFvptfuknU7cotUwWa3dg8RiUB8kNlKJyEEByaVpWEbEOabnONKEMkstvuBx6Ots
kA63wbe7QcPgbUYuq7g0nijDw6E2aEtf0nx2Xx4ZDL932qjg/xUkiBpmbDXHw4Gu
nimNXVQtbCzF74SyTvxEtupiijOTm5eHtoKtg0mYnqPZ+V9eOwEvW8IHaFFf8XHD
SecikoTtH1Q4RVtqOcAQ
=jLlB
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"This time including:
- A new IOMMU driver for s390 pci devices
- Common dma-ops support based on iommu-api for ARM64. The plan is
to use this as a basis for ARM32 and hopefully other architectures
as well in the future.
- MSI support for ARM-SMMUv3
- Cleanups and dead code removal in the AMD IOMMU driver
- Better RMRR handling for the Intel VT-d driver
- Various other cleanups and small fixes"
* tag 'iommu-updates-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits)
iommu/vt-d: Fix return value check of parse_ioapics_under_ir()
iommu/vt-d: Propagate error-value from ir_parse_ioapic_hpet_scope()
iommu/vt-d: Adjust the return value of the parse_ioapics_under_ir
iommu: Move default domain allocation to iommu_group_get_for_dev()
iommu: Remove is_pci_dev() fall-back from iommu_group_get_for_dev
iommu/arm-smmu: Switch to device_group call-back
iommu/fsl: Convert to device_group call-back
iommu: Add device_group call-back to x86 iommu drivers
iommu: Add generic_device_group() function
iommu: Export and rename iommu_group_get_for_pci_dev()
iommu: Revive device_group iommu-ops call-back
iommu/amd: Remove find_last_devid_on_pci()
iommu/amd: Remove first/last_device handling
iommu/amd: Initialize amd_iommu_last_bdf for DEV_ALL
iommu/amd: Cleanup buffer allocation
iommu/amd: Remove cmd_buf_size and evt_buf_size from struct amd_iommu
iommu/amd: Align DTE flag definitions
iommu/amd: Remove old alias handling code
iommu/amd: Set alias DTE in do_attach/do_detach
iommu/amd: WARN when __[attach|detach]_device are called with irqs enabled
...
Pull s390 updates from Martin Schwidefsky:
"There is only one new feature in this pull for the 4.4 merge window,
most of it is small enhancements, cleanup and bug fixes:
- Add the s390 backend for the software dirty bit tracking. This
adds two new pgtable functions pte_clear_soft_dirty and
pmd_clear_soft_dirty which is why there is a hit to
arch/x86/include/asm/pgtable.h in this pull request.
- A series of cleanup patches for the AP bus, this includes the
removal of the support for two outdated crypto cards (PCICC and
PCICA).
- The irq handling / signaling on buffer full in the runtime
instrumentation code is dropped.
- Some micro optimizations: remove unnecessary memory barriers for a
couple of functions: [smb_]rmb, [smb_]wmb, atomics, bitops, and for
spin_unlock. Use the builtin bswap if available and make
test_and_set_bit_lock more cache friendly.
- Statistics and a tracepoint for the diagnose calls to the
hypervisor.
- The CPU measurement facility support to sample KVM guests is
improved.
- The vector instructions are now always enabled for user space
processes if the hardware has the vector facility. This simplifies
the FPU handling code. The fpu-internal.h header is split into fpu
internals, api and types just like x86.
- Cleanup and improvements for the common I/O layer.
- Rework udelay to solve a problem with kprobe. udelay has busy loop
semantics but still uses an idle processor state for the wait"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
s390: remove runtime instrumentation interrupts
s390/cio: de-duplicate subchannel validation
s390/css: unneeded initialization in for_each_subchannel
s390/Kconfig: use builtin bswap
s390/dasd: fix disconnected device with valid path mask
s390/dasd: fix invalid PAV assignment after suspend/resume
s390/dasd: fix double free in dasd_eckd_read_conf
s390/kernel: fix ptrace peek/poke for floating point registers
s390/cio: move ccw_device_stlck functions
s390/cio: move ccw_device_call_handler
s390/topology: reduce per_cpu() invocations
s390/nmi: reduce size of percpu variable
s390/nmi: fix terminology
s390/nmi: remove casts
s390/nmi: remove pointless error strings
s390: don't store registers on disabled wait anymore
s390: get rid of __set_psw_mask()
s390/fpu: split fpu-internal.h into fpu internals, api, and type headers
s390/dasd: fix list_del corruption after lcu changes
s390/spinlock: remove unneeded serializations at unlock
...
Pull networking updates from David Miller:
Changes of note:
1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.
2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
David Ahern.
3) Allow the user to ask for the statistics to be filtered out of
ipv4/ipv6 address netlink dumps. From Sowmini Varadhan.
4) More work to pass the network namespace context around deep into
various packet path APIs, starting with the netfilter hooks. From
Eric W Biederman.
5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
Richter.
6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.
7) Support Very High Throughput in wireless MESH code, from Bob
Copeland.
8) Allow setting the ageing_time in switchdev/rocker. From Scott
Feldman.
9) Properly autoload L2TP type modules, from Stephen Hemminger.
10) Fix and enable offload features by default in 8139cp driver, from
David Woodhouse.
11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
Jiri Benc.
12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
Opstad.
13) Fix IPSEC flowcache overflows on large systems, from Steffen
Klassert.
14) Convert bridging to track VLANs using rhashtable entries rather than
a bitmap. From Nikolay Aleksandrov.
15) Make TCP listener handling completely lockless, this is a major
accomplishment. Incoming request sockets now live in the
established hash table just like any other socket too.
From Eric Dumazet.
15) Provide more bridging attributes to netlink, from Nikolay
Aleksandrov.
16) Use hash based algorithm for ipv4 multipath routing, this was very
long overdue. From Peter Nørlund.
17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann.
18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.
19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This
influences the port binding selection logic used by SO_REUSEPORT.
20) Add ipv6 support to VRF, from David Ahern.
21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.
22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.
23) Implement RACK loss recovery in TCP, from Yuchung Cheng.
24) Support multipath routes in MPLS, from Roopa Prabhu.
25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
Dumazet.
26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
Sudarsana Kalluru.
27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
Sowa.
28) Support ipv6 geneve tunnels, from John W Linville.
29) Add flood control support to switchdev layer, from Ido Schimmel.
30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
Hannes Frederic Sowa.
31) Support persistent maps and progs in bpf, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
sh_eth: use DMA barriers
switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
net: sched: kill dead code in sch_choke.c
irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
net: dsa: mv88e6xxx: include DSA ports in VLANs
net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
net/core: fix for_each_netdev_feature
vlan: Invoke driver vlan hooks only if device is present
arcnet/com20020: add LEDS_CLASS dependency
bpf, verifier: annotate verbose printer with __printf
dp83640: Only wait for timestamps for packets with timestamping enabled.
ptp: Change ptp_class to a proper bitmask
dp83640: Prune rx timestamp list before reading from it
dp83640: Delay scheduled work.
dp83640: Include hash in timestamp/packet matching
ipv6: fix tunnel error handling
net/mlx5e: Fix LSO vlan insertion
net/mlx5e: Re-eanble client vlan TX acceleration
net/mlx5e: Return error in case mlx5e_set_features() fails
net/mlx5e: Don't allow more than max supported channels
...
Pull crypto update from Herbert Xu:
"API:
- Add support for cipher output IVs in testmgr
- Add missing crypto_ahash_blocksize helper
- Mark authenc and des ciphers as not allowed under FIPS.
Algorithms:
- Add CRC support to 842 compression
- Add keywrap algorithm
- A number of changes to the akcipher interface:
+ Separate functions for setting public/private keys.
+ Use SG lists.
Drivers:
- Add Intel SHA Extension optimised SHA1 and SHA256
- Use dma_map_sg instead of custom functions in crypto drivers
- Add support for STM32 RNG
- Add support for ST RNG
- Add Device Tree support to exynos RNG driver
- Add support for mxs-dcp crypto device on MX6SL
- Add xts(aes) support to caam
- Add ctr(aes) and xts(aes) support to qat
- A large set of fixes from Russell King for the marvell/cesa driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (115 commits)
crypto: asymmetric_keys - Fix unaligned access in x509_get_sig_params()
crypto: akcipher - Don't #include crypto/public_key.h as the contents aren't used
hwrng: exynos - Add Device Tree support
hwrng: exynos - Fix missing configuration after suspend to RAM
hwrng: exynos - Add timeout for waiting on init done
dt-bindings: rng: Describe Exynos4 PRNG bindings
crypto: marvell/cesa - use __le32 for hardware descriptors
crypto: marvell/cesa - fix missing cpu_to_le32() in mv_cesa_dma_add_op()
crypto: marvell/cesa - use memcpy_fromio()/memcpy_toio()
crypto: marvell/cesa - use gfp_t for gfp flags
crypto: marvell/cesa - use dma_addr_t for cur_dma
crypto: marvell/cesa - use readl_relaxed()/writel_relaxed()
crypto: caam - fix indentation of close braces
crypto: caam - only export the state we really need to export
crypto: caam - fix non-block aligned hash calculation
crypto: caam - avoid needlessly saving and restoring caam_hash_ctx
crypto: caam - print errno code when hash registration fails
crypto: marvell/cesa - fix memory leak
crypto: marvell/cesa - fix first-fragment handling in mv_cesa_ahash_dma_last_req()
crypto: marvell/cesa - rearrange handling for sw padded hashes
...
Includes a number of fixes for the arch-timer, introducing proper
level-triggered semantics for the arch-timers, a series of patches to
synchronously halt a guest (prerequisite for IRQ forwarding), some tracepoint
improvements, a tweak for the EL2 panic handlers, some more VGIC cleanups
getting rid of redundant state, and finally a stylistic change that gets rid of
some ctags warnings.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWOhgAAAoJEEtpOizt6ddyKS8H/2ZHMTPjo6yChnrusNWy4Qbr
6laPDlzL+g45oMQRwNL7GnM1deRftaxvT2Wi+X84D/6Y/BD6MPds4HgtBfuWcSZ1
CyRJ0Ot/zrxenucSuJuOjq+a9gdizdAczkbB1MfYDULJH8fb6D+7RYLo3zgh4Xo4
pla3L9U6gSWe+YopBjZtZH43m3fwiwSM/v+uHOTIcXrsbR+fEgx/EFSKmA/DUCuo
P5cFO/ceUGu7nATCexu5V82TgR2hvurrsR7mqfwY8YcF6HRM+NEOoS29xWC77v5S
u/F08TKuKQLv0YTEFTyLETI/oEeuC0cHtrRQBNf4+9kXEOzKyXaae0wR/I6X2Ss=
=GMNk
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM Changes for v4.4-rc1
Includes a number of fixes for the arch-timer, introducing proper
level-triggered semantics for the arch-timers, a series of patches to
synchronously halt a guest (prerequisite for IRQ forwarding), some tracepoint
improvements, a tweak for the EL2 panic handlers, some more VGIC cleanups
getting rid of redundant state, and finally a stylistic change that gets rid of
some ctags warnings.
Conflicts:
arch/x86/include/asm/kvm_host.h
The external interrupts for runtime instrumentation buffer-full
and runtime instrumentation halted are unused and have no current
user. Remove the support and ignore the second parameter of the
s390_runtime_instr system call from now on.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Depending on the gcc version we can use builtin_bswap instead of
architecture functions. Doing so is better than the inline assembly
version of load reverse for two reasons:
- the sequence of load reversed, apply constant mask, save reversed can
be optimized to load, apply reversed mask, save
- builtins are slightly better to optimize e.g. gcc instruction
scheduler cannot optimize grouping on inline assemblies.
To enable set we have to ARCH_USE_BUILTIN_BSWAP.
bloat-o-meter results:
add/remove: 1/1 grow/shrink: 75/533 up/down: 1711/-9394 (-7683)
Suggested-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
git commit 155e839a81
"s390/kernel: dynamically allocate FP register save area"
introduced a regression in regard to ptrace.
If the vector register extension is not present or unused the
ptrace peek of a floating pointer register return incorrect data
and the ptrace poke to a floating pointer register overwrites the
task structure starting at task->thread.fpu.fprs.
Cc: stable@kernel.org # v4.3
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We currently do some magic shifting (by exploiting that exit codes
are always a multiple of 4) and a table lookup to jump into the
exit handlers. This causes some calculations and checks, just to
do an potentially expensive function call.
Changing that to a switch statement gives the compiler the chance
to inline and dynamically decide between jump tables or inline
compare and branches. In addition it makes the code more readable.
bloat-o-meter gives me a small reduction in code size:
add/remove: 0/7 grow/shrink: 1/1 up/down: 986/-1334 (-348)
function old new delta
kvm_handle_sie_intercept 72 1058 +986
handle_prog 704 696 -8
handle_noop 54 - -54
handle_partial_execution 60 - -60
intercept_funcs 120 - -120
handle_instruction 198 - -198
handle_validity 210 - -210
handle_stop 316 - -316
handle_external_interrupt 368 - -368
Right now my gcc does conditional branches instead of jump tables.
The inlining seems to give us enough cycles as some micro-benchmarking
shows minimal improvements, but still in noise.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
the s390 debug feature does not need newlines. In fact it will
result in empty lines. Get rid of 4 leftovers.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We seemed to have missed a few corner cases in commit f6c137ff00
("KVM: s390: randomize sca address").
The SCA has a maximum size of 2112 bytes. By setting the sca_offset to
some unlucky numbers, we exceed the page.
0x7c0 (1984) -> Fits exactly
0x7d0 (2000) -> 16 bytes out
0x7e0 (2016) -> 32 bytes out
0x7f0 (2032) -> 48 bytes out
One VCPU entry is 32 bytes long.
For the last two cases, we actually write data to the other page.
1. The address of the VCPU.
2. Injection/delivery/clearing of SIGP externall calls via SIGP IF.
Especially the 2. happens regularly. So this could produce two problems:
1. The guest losing/getting external calls.
2. Random memory overwrites in the host.
So this problem happens on every 127 + 128 created VM with 64 VCPUs.
Cc: stable@vger.kernel.org # v3.15+
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Each per_cpu() invocation generates extra code. Since there are a lot
of similiar calls in the topology code we can avoid a lot of them.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Change the flag fields within struct mcck_struct to simple bit fields
to reduce the size of the structure which is used as percpu variable.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
According to the architecture registers are validated and not
revalidated. So change comments and functions names to match.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove all the casts to and from the machine check interruption code.
This patch changes struct mci to a union, which contains an anonymous
structure with the already known bits and in addition an unsigned
long field, which contains the raw machine check interruption code.
This allows to simply assign and decoce the interruption code value
without the need for all those casts we had all the time.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390_handle_damage() has character string parameter which was used as
a pointer to verbose error message. The hope was (a lot of years ago)
when analyzing dumps that register R2 would still contain the pointer
and therefore it would be rather easy to tell what went wrong.
However gcc optimizes the strings away since a long time. And even if
it wouldn't it is necessary to have a close look at the machine check
interruption code to tell what's wrong.
So remove the pointless error strings.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The current disabled wait code stores register contents into their
save areas, however it is (at least) missing the new vector registers.
Given the fact that the whole exercise seems to be rather pointless
simply don't save any registers anymore.
In a "live" system it is always possible to inspect register contents,
and in case of a dump the register contents will be stored by the
dump mechanism.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With the removal of 31 bit code we can always assume that the epsw
instruction is available. Therefore use the __extract_psw() function
to disable and enable machine checks.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Some times it is useful for architecture implementations of KVM to know
when the VCPU thread is about to block or when it comes back from
blocking (arm/arm64 needs to know this to properly implement timers, for
example).
Therefore provide a generic architecture callback function in line with
what we do elsewhere for KVM generic-arch interactions.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Conflicts:
drivers/net/usb/asix_common.c
net/ipv4/inet_connection_sock.c
net/switchdev/switchdev.c
In the inet_connection_sock.c case the request socket hashing scheme
is completely different in net-next.
The other two conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Split the API and FPU type definitions into separate header files
similar to "x86/fpu: Rename fpu-internal.h to fpu/internal.h" (78f7f1e54b).
The new header files and their meaning are:
asm/fpu/types.h:
FPU related data types, needed for 'struct thread_struct' and
'struct task_struct'.
asm/fpu/api.h:
FPU related 'public' functions for other subsystems and device
drivers.
asm/fpu/internal.h:
FPU internal functions mainly used to convert
FPU register contents in signal handling.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
SHA_MAX_STATE_SIZE is just the number of u32 word for SHA512.
So replace the raw value "16" by their meaning (SHA512_DIGEST_SIZE / 4)
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
the kernel locks have aqcuire/release semantics. No operation done
after the lock can be "moved" before the lock and no operation before
the unlock can be moved after the unlock. But it is perfectly fine
that memory accesses which happen code wise after unlock are performed
within the critical section.
On s390x, reads are in-order with other reads (PoP section
"Storage-Operand Fetch References") and writes are in-order with
other writes (PoP section "Storage-Operand Store References"). Writes
are also in-order with reads to the same memory location (PoP section
"Storage-Operand Store References"). To other CPUs (and the channel
subsystem), reads additionally appear to be performed prior to reads or
writes that happen after them in the conceptual sequence (PoP section
"Relation between Operand Accesses").
So at least as observed by other CPUs and the channel subsystem, reads
inside the critical sections will not happen after unlock (and writes
are in-order anyway). That's exactly what we need for "RELEASE
operations" (memory-barriers.txt): "It guarantees that all memory
operations before the RELEASE operation will appear to happen before the
RELEASE operation with respect to the other components of the system."
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
[cross-reading and lot of improvements for the patch description]
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The first level machine check handler for etr and stp machine checks may
call queue_work() while in nmi context. This may deadlock e.g. if the
machine check happened when the interrupted context did hold a lock, that
also will be acquired by queue_work().
Therefore split etr and stp machine check handling into first and second
level handling. The second level handling will then issue the queue_work()
call in process context which avoids the potential deadlock.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
zpci_err_insn writes stale stack content to the debugfs.
Ensure that the struct in zpci_err_insn is ordered in a way that
we don't have uninitialized holes in it. In addition to that
add the packed attribute.
Fixes: 3d8258e (s390/pci: move debug messages to debugfs)
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With the removal of 31 bit support a couple of defines became unused.
Remove them.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For some unknown reason the mcck_interruption_code field is defined
as array of two 32 bit values. Given that this actually is a 64 bit
field according to the architecture, change the type to u64.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The defines that are used in entry.S have been partially converted to
use the _BITUL macro (setup.h). This patch converts the rest.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The cpu flags and pt_regs flags fields are each 64 bits in size. A flag can
be set with helper functions like set_cpu_flags().
These functions create a mask using "1U << flag". This doesn't work if flag
is larger than 31, since 1U << 32 == 0.
So fix this in case we ever will have such flag numbers.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Paolo Bonzini