Commit Graph

58259 Commits

Author SHA1 Message Date
Dhananjay Phadke 96acb6eb8e RESEND [PATCH 3/3] NetXen: Graceful teardown of interface and hardware upon module unload
Resending patch 3/3 only.

These changes allow driver close routine to be called during module unload,
to clean-up buffers and other software resources, flush queues etc. Also,
hardware is reset to pristine state.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Milan Bag <mbag@netxen.com>
Signed-off-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:52 -04:00
Adrian Bunk d14e37e120 drivers/net/ns83820.c: fix a check-after-use
This patch fixes a check-after-use spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:52 -04:00
David Brownell afaee82c0a net/usb/cdc_ether minor sparse cleanup
Remove an "sparse" warning about a shadowed variable name.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:52 -04:00
dhananjay.phadke@gmail.com 2d1a3bbdf2 RESEND [PATCH 2/3] NetXen: Support per PCI-function interrupt mask registers
This patch updates the various access routines to access different
control and status settings present in different register locations.
This will fix problems related to working of different ports in
multi Port card.

Signed-off by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off by: Milan Bag <mbag@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:52 -04:00
dhananjay.phadke@gmail.com 644caeefb3 RESEND [PATCH 1/3] NetXen: Fix issue of MSI not working correctly
NetXen driver uses PCI function 0 to provide the functionality of MSI.
The patch makes driver check the bus master bit for function 0 and
enable it after the card initialization.

Signed-off-by: Dhananjay Phadke<dhananjay@netxen.com>
Signed-off-by: Milan Bag <mbag@netxen.com>
Signed-off-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:52 -04:00
Peter Korsgaard b8f59586ce dm9601: Return 0 from bind() on success
Fixup dm9601_bind() so it returns 0 on success rather than just a positive
number, as otherwise usbnet doesn't init the status handler.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:51 -04:00
Peter Korsgaard 043600a62a Update MAINTAINERS for USB network devices
>>>>> "Greg" == Greg KH <greg@kroah.com> writes:

 Greg> Yeah, this is the cdc_acm driver that is still in the USB drivers/
 Greg> directory tree as it is a USB class driver that shows up as a tty device
 Greg> to userspace.  It should not be moved to the networking list unless no
 Greg> one minds that I never see any queries about it :)

Ok, here's an updated patch:

Questions regarding the USB network drivers should now go to netdev.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:51 -04:00
Peter Korsgaard 3e323f3e86 usbnet: Zero padding byte if there is tail room in skb
Usbnet adds a padding byte if a 0 byte USB packet would be sent. Zero
padding byte if there is tail room in skb.

Signed-of-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:51 -04:00
Peter Korsgaard 23de559b8d dm9601: HW header size shouldn't be included in packet length
The dm9601 driver was including the 2 byte hardware header in the
packet length, causing the HW to send 2 extra bytes of garbage on tx.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:51 -04:00
maximilian attems 983b7dc07f starfire list alpha as 64 bit arch
instead of:
"This driver has not been ported to this 64-bit architecture yet."
the driver is said to work on alpha, see
http://bugs.debian.org/305330

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:51 -04:00
Maik Hampel b245fb675b myri10ge: SET_NETDEV_DEV()
SET_NETDEV_DEV() in myri10ge to create the "/sys/class/net/<if>/device"
symlink.

Signed-off-by: Maik Hampel <m.hampel@gmx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:51 -04:00
Jeff Garzik c529e632a2 Merge branch 'for_linus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into upstream-fixes 2007-07-02 08:15:33 -04:00
Jeff Garzik 36f9d0c5e9 Merge branch 'libertas-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes 2007-07-02 08:14:30 -04:00
Mike Frysinger 4a3207a333 Blackfin arch: update board defconfig files
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-02 13:49:15 +08:00
Kumar Gala 795bb15e07 [POWERPC] Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-02 00:04:36 -05:00
Olof Johansson 9f7905812e [POWERPC] Uninline and export virq_to_hw() for the pasemi_mac driver
Uninline virq_to_hw and export it so modules can use it. The alternative
would be to export the irq_map array instead, but it's an infrequently
called function, and keeping the array unexported seems considerably
cleaner.

This is needed so that the pasemi_mac driver can be compiled as a module.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-02 13:29:21 +10:00
Christian Krafft ee5d1b7f2a [POWERPC] Fix PMI breakage in cbe_cbufreq driver
The recent change to cell_defconfig to enable cpufreq on Cell exposed
the fact that the cbe_cpufreq driver currently needs the PMI interface
code to compile, but Kconfig doesn't make sure that the PMI interface
code gets built if cbe_cpufreq is enabled.

In fact cbe_cpufreq can work without PMI, so this ifdefs out the code
that deals with PMI.  This is a minimal solution for 2.6.22; a more
comprehensive solution will be merged for 2.6.23.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-02 10:35:58 +10:00
David Gibson 86affd5a00 [POWERPC] Disable old EMAC driver in arch/powerpc
The EMAC driver, in drivers/net/ibm_emac, for the embedded Ethernet
MAC found in PowerPC 4xx embedded chips is not suitable for
arch/powerpc.  It will not build because it relies on the old arch/ppc
OCP mechanism.  BenH has a new, device-tree aware version of the
driver which will work in arch/powerpc, but until it's merged, this
patch will disable the old, non-building version.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-02 10:35:58 +10:00
Linus Torvalds a38d6181ff Linux 2.6.22-rc7
Last -rc? That's the plan..
2007-07-01 12:54:24 -07:00
Rafael J. Wysocki 2391dae3e3 PM: introduce set_target method in pm_ops
Commit 52ade9b3b9 changed the suspend code
ordering to execute pm_ops->prepare() after the device model per-device
.suspend() calls in order to fix some ACPI-related issues.  Unfortunately, it
broke the at91 platform which assumed that pm_ops->prepare() would be called
before suspending devices.

at91 used pm_ops->prepare() to get notified of the target system sleep state,
so that it could use this information while suspending devices.  However, with
the current suspend code ordering pm_ops->prepare() is called too late for
this purpose.  Thus, at91 needs an additional method in 'struct pm_ops' that
will be used for notifying the platform of the target system sleep state.
Moreover, in the future such a method will also be needed by ACPI.

This patch adds the .set_target() method to 'struct pm_ops' and makes the
suspend code call it, if implemented, before executing the device model
per-device .suspend() calls.  It also modifies the at91 code to use
pm_ops->set_target() instead of pm_ops->prepare().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
Bjorn Helgaas cbcdd772ff smsc-ircc2: bypass PNP detection until we get the quirks worked out
Don't use PNP detection by default yet.  We have some PNP and BIOS issues
to work out first.

Sample problem on a Toshiba Portege 4000: the SMCf010 device is handed off
disabled.  We assign I/O ports originally assigned to the SMCf010 to a
PCMCIA device instead.  We enable the SMCf010, configuring it to use
disjoint ports, but _SRS doesn't work correctly, so the device doesn't
work.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
Andrew Morton 84288ad89e i386: mtrr crash fix
Commit 3ebad59056 ("[PATCH] x86: Save and
restore the fixed-range MTRRs of the BSP when suspending") added mtrr
operations without verifying that the CPU has MTRRs.  Crashes transmeta
CPUs.

Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux@horizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
Maxime Austruy 5ebffd7c05 asus_acpi: fix oops on non-asus machines
If asus_acpi_init doesn't find any device it knows about, it mistakenly
returns a "success" error code even though it cleans up after itself.  Later
when trying to rmmod asus_acpi, the module_exit routine would try to clean up
one more time and we would end up calling
acpi_bus_unregister_driver(&asus_hotk_driver) twice.  This patch addresses
this first problem by returning -ENODEV when no appropriate device is found.

Then there was also another bug with the code handling the return value of
backlight_device_register.  If this function ever failed, the driver would
cleanup by calling the module_exit routine from module_init, but it would
still return "success".  So any attempt to rmmod this module would result in
asus_acpi_exit being called twice but it's not ready to handle it (I haven't
hit this bug, just found it by code inspection).  This patch fixes that by
inserting a return -ENODEV; at the end of this error handling path.

Signed-off-by: Maxime Austruy <maxime@tralhalla.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
Randy Dunlap d80d021733 pci.h stubs (for EDD build error)
Provide stubs for more PCI bus/slot functions when CONFIG_PCI=n.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
Randy Dunlap 10c86be577 ALSA: more section mismatches
Fix section mismatch warnings:

WARNING: sound/built-in.o(.exit.text+0x3ad): Section mismatch: reference to .init.text: (between 'sb_exit' and 'unload_uart6850')
WARNING: sound/built-in.o(.exit.text+0x753): Section mismatch: reference to .init.text: (between 'snd_mts64_module_exit' and 'snd_portman_module_exit')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
Alexey Dobriyan 95203aec21 frv: fix fallout from "remove sched.h from mm.h" patch
/home/rpjday/AMD/k/topics/0_hi/hi1.c:15: error: dereferencing pointer to incomplete type
/home/rpjday/AMD/k/topics/0_hi/hi1.c:16: error: dereferencing pointer to incomplete type

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
Christoph Lameter 17022220dd SLAB: remove WARN_ON_ONCE for zero sized objects for 2.6.22 release
We agreed to remove the WARN_ON_ONCE before 2.6.22 is released.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:43 -07:00
Stephen Hemminger 0f4915b9c5 blink driver power saving
The blink driver wakes up every jiffies which wastes power unnecessarily.
Using a notifier gives same effect. Also add ability to unload module.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
[ We should really just delete the whole thing. The blink driver is
  broken in many other ways too  -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 11:08:39 -07:00
Linus Torvalds 4710bcce8e i386: remove bogus mtrr range check
Commit 9215da3320 "fixed" the MTRR range
check to not allow any MTRR's under the 1MB mark (since that's where the
fixed MTRR's are active).

However, that was totally bogus, since it's normal (and almost required)
to have a large variable MTRR that starts at 0, and covers some large
percentage of the whole RAM, and then using the fixed MTRR's to override
that large MTRR to handle the special ISA hole in the 640k-1M region.

The old check was bogus too (checking that no variable MTRR is used that
is entirely under the 1MB range), but at least it wasn't actively
detrimental, because no sane situation would ever trigger such MTRR
usage in the first place.

That said, the whole notion of not allowing variable MTRR's in the low
1MB is just stupid, so rather than revert the commit, this just removes
the whole sad and unnecessary check entirely.

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Luca Palermo <darkmage@sabayonlinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 10:56:11 -07:00
Linus Torvalds abdba71725 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Add linux/pagemap.h to asm/tlb.h
  [SPARC64]: Need to set state to IDLE during sun4v IRQ enable.
  [SPARC64]: Fix VIRQ enabling.
  [SPARC64]: Add irqs to mdesc_node.
2007-06-29 21:30:18 -07:00
Linus Torvalds 2d408b42ed Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IRDA]: fix printk format
  [NETPOLL] netconsole: fix soft lockup when removing module
  [NETPOLL]: tx lock deadlock fix
  SCTP: lock_sock_nested in sctp_sock_migrate
  SCTP: Fix sctp_getsockopt_get_peer_addrs
  SCTP: update sctp_getsockopt helpers to allow oversized buffers
2007-06-29 21:29:57 -07:00
Will Schmidt fde937d826 Fix VDSO gettimeofday() when called with NULL struct timeval.
The vdso64 portion of patch 74609f4536 for
fixing problems with NULL gettimeofday input mistakenly checks for a
null tz field twice, when it should be checking for null tz once, and
null tv once; by way of a r10/r11 typo.

Any application calling gettimeofday(&tv,NULL) will "fail".

This corrects that typo, and makes my G5 happy.

Tested on G5.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Cc: Tony Breeds <tony@bakeyournoodle.com>
Forwarded-by: Ben Herrenschmidt <benh@kernel.crashing.org>

[ Ben says: "I checked the 32 bits part of the change is correct.  You
  can probably blame me for originally writing the 2 versions with
  inversed usage of r10 and r11, thus confusing Tony :-)"

  Ben duly blamed.   - Linus ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-29 21:27:00 -07:00
Stefan Richter fe77d4f283 firewire: add Kconfig help on building both stacks
Alas that won't work so good, because nobody reads help texts.

I thought about adding some crude multiple choice selection (build the
old stack, build the new stack, build both stacks).  It's possible, but
it would introduce awkward dummy config variables.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-06-29 17:32:07 +02:00
Stefan Richter 0a9972baa7 firewire: fix async reception on big endian machines
descriptor.data_address is little endian

Tested-by: Olaf Hering <olh@suse.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-06-29 17:32:07 +02:00
Randy Dunlap 5f0212174d [IRDA]: fix printk format
Fix printk format warning:
drivers/net/irda/irport.c:512: warning: format '%d' expects type 'int', but argument 5 has type 'long int'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-28 22:40:23 -07:00
Kumar Gala 8da32de5c8 gianfar: Fix typo bug introduced by move to udp_hdr()
In commit 4bedb45203 both the udp and tcp
cases where changed to use udp_hdr() instead of leaving the tcp case
alone and fixing with tcp_hdr().

This ended up causing random behavior with TCP connections because
of looking for tcp_hdr()->check in the wrong place.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 00:12:04 -05:00
Jarek Poplawski 17200811cf [NETPOLL] netconsole: fix soft lockup when removing module
#1
Until kernel ver. 2.6.21 (including) cancel_rearming_delayed_work()
required a work function should always (unconditionally) rearm with
delay > 0 - otherwise it would endlessly loop. This patch replaces
this function with cancel_delayed_work(). Later kernel versions don't
require this, so here it's only for uniformity.

#2
After deleting a timer in cancel_[rearming_]delayed_work() there could
stay a last skb queued in npinfo->txq causing a memory leak after
kfree(npinfo).

Initial patch & testing by: Jason Wessel <jason.wessel@windriver.com>

Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-28 22:11:47 -07:00
Dmitry Torokhov 4e4eda866e Input: document some of keycodes
Document some of keycodes, based on USB HUT 1.12 and current mapping
in HID driver.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-29 01:10:54 -04:00
Henrique de Moraes Holschuh c77da17803 Input: add a new EV_SW SW_RADIO event, for radio switches on laptops
Many laptops have rf-kill physical switches that are not keys, but slider
or rocker switches.  Often (like in all ThinkPads with a radio kill slider
switch), they have both a slider/rocker switch and a hot key.

Trying to kludge a real switch to act like a key is not a very smart thing
to do if you can help it, and it gets specially bad when you are going to
have both in the same machine.  So, we do the right thing and add an input
EV_SW event for radio kill switches.

The EV_SW SW_RADIO event is defined with positive logic, i.e. when the
switch is active, the radios are to be enabled.  When the switch is
inactive, the radios are to be disabled.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-29 01:08:49 -04:00
Dmitry Torokhov 33143ea1a3 Input: serio - take drv_mutex in serio_cleanup()
We need to take serio->drv_mutex in serio_cleanup() to prevent the
function from being called while driver is in the middle of attaching
to a serio port. Such situation can happen with i8042 and atkbd drivers
if user rapidly presses Ctrl-Alt-Del during system startup, and leads
to kernel oops.

Reported-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-29 01:06:35 -04:00
Alexey Dobriyan 9f462a1a5d [SPARC64]: Add linux/pagemap.h to asm/tlb.h
As seen on sparc64-allnoconfig:

  CC      arch/sparc64/mm/tlb.o
In file included from arch/sparc64/mm/tlb.c:19:
include/asm/tlb.h: In function 'tlb_flush_mmu':
include/asm/tlb.h:60: warning: implicit declaration of function 'release_pages'
include/asm/tlb.h: In function 'tlb_remove_page':
include/asm/tlb.h:92: warning: implicit declaration of function 'page_cache_release'

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-28 21:25:31 -07:00
David S. Miller 25243633c2 Merge master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-dev 2007-06-28 21:21:43 -07:00
Linus Torvalds 0471448f4d Merge branch 'for_linus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
* 'for_linus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc:
  phy: Fix phy_id for Vitesse 824x PHY
2007-06-28 11:45:12 -07:00
David Woodhouse edd5cd4a94 Introduce fixed sys_sync_file_range2() syscall, implement on PowerPC and ARM
Not all the world is an i386.  Many architectures need 64-bit arguments to be
aligned in suitable pairs of registers, and the original
sys_sync_file_range(int, loff_t, loff_t, int) was therefore wasting an
argument register for padding after the first integer.  Since we don't
normally have more than 6 arguments for system calls, that left no room for
the final argument on some architectures.

Fix this by introducing sys_sync_file_range2(int, int, loff_t, loff_t) which
all fits nicely.  In fact, ARM already had that, but called it
sys_arm_sync_file_range.  Move it to fs/sync.c and rename it, then implement
the needed compatibility routine.  And stop the missing syscall check from
bitching about the absence of sys_sync_file_range() if we've implemented
sys_sync_file_range2() instead.

Tested on PPC32 and with 32-bit and 64-bit userspace on PPC64.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:30 -07:00
Jay Lubomirski 2f4d4da8f8 serial: clear proper MPSC interrupt cause bits
The interrupt clearing code in mpsc_sdma_intr_ack() mistakenly clears the
interrupt for both controllers instead of just the one its supposed to.
This can result in the other controller appearing to hang because its
interrupt was effectively lost.

So, don't clear the interrupt cause bits for both MPSC controllers when
clearing the interrupt for one of them.  Just clear the one that is
supposed to be cleared.

Signed-off-by: Jay Lubomirski <jaylubo@motorola.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:29 -07:00
Andrew Morton ddc80bd781 ext2: fix return of uninitialised variable
gcc correctly says

fs/ext2/super.c: In function 'ext2_remount':
fs/ext2/super.c:1055: warning: 'err' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:29 -07:00
Alexey Dobriyan 5da44ad504 mips-jazz: correct flags for timer io resource
arch/mips/jazz/setup.c:55:4: error: Initializer entry defined twice

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:19 -07:00
Evgeniy Polyakov 33e44b1588 w1_therm_read_bin: don't call flush_signals()
This can disrupt userspace signal management.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:19 -07:00
Masami Hiramatsu a66e356c04 relayfs: fix overwrites
When I use relayfs with "overwrite" mode, read() still sets incorrect
number of consumed bytes.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Tom Zanussi <zanussi@us.ibm.com>
Acked-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:18 -07:00
David Wilder 8d62fdebda relay file read: start-pos fix
Fix a bug in the relay read interface causing the number of consumed bytes
to be set incorrectly.

Signed-off-by: Tom Zanussi <zanussi@us.ibm.com>
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:34:54 -07:00