Commit Graph

11 Commits

Author SHA1 Message Date
Furquan Shaikh 0b471aaa0e mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
Commit 274e43edcd ("mfd: intel-lpss: Do not put device in reset
state on suspend") changed the behavior on suspend by not putting LPSS
controllers into reset. This was done because S3/S0ix fail if UART
device is put into reset and no_console_suspend flag is enabled.

Because of the above change, I2C controller gets into a bad state if
it observes that the I2C lines are pulled low when power to I2C device
is cut off during suspend (generally, I2C lines are pulled to power
rail of the I2C device in order to ensure that there is no leakage
because of the pulls when device is turned off). This results in the
controller timing out for all future I2C operations after resume. It
is primarily because of the following sequence of operations:

During suspend:
1. I2C controller is disabled, but it is not put into reset.
2. Power to I2C device is cut off.
3. #2 results in the I2C lines being pulled low.

==> At this point the I2C controller gets into a bad state

On resume:
1. Power to I2C device is enabled.
2. #2 results in the I2C lines being pulled high.
3. I2C controller is enabled.

However, even after enabling the I2C controller, all future I2C xfers
fail since the controller is in a bad state and does not attempt to
make any transactions and hence times out.

In order to ensure that the controller does not get into a bad state,
this change puts it into reset if the controller type is not
UART. With this change, the order of operations is:

During suspend:
1. I2C controller is disabled and put into reset.
2. Power to I2C device is cut off.
3. #2 results in the I2C lines being pulled low.

On resume:
1. Power to I2C device is enabled.
2. #2 results in the I2C lines being pulled high.
3. I2C controller is enabled and taken out of reset.

Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05 08:46:01 +01:00
Azhar Shaikh 274e43edcd mfd: intel-lpss: Do not put device in reset state on suspend
Commit 41a3da2b8e ("mfd: intel-lpss: Save register context on
suspend") saved the register context while going to suspend and
also put the device in reset state.

Due to the resetting of device, system cannot enter S3/S0ix
states when no_console_suspend flag is enabled. The system
and serial console both hang. The resetting of device is not
needed while going to suspend. Hence remove this code.

Cc: stable@vger.kernel.org
Fixes: 41a3da2b8e ("mfd: intel-lpss: Save register context on suspend")
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16 09:50:25 +00:00
Linus Torvalds 6eb59af580 - New Drivers
- Add new driver for MAXIM MAX77620/MAX20024 PMIC
    - Add new driver for Hisilicon HI665X PMIC
  - New Device Support
    - Add support for AXP809 in axp20x-rsb
    - Add support for Power Supply in axp20x
  - New core features
    - devm_mfd_* managed resources
  - Fix-ups
    - Remove unused code; da9063-irq, wm8400-core, tps6105x, smsc-ece1099,
 			 twl4030-power
    - Improve clean-up in error path; intel_quark_i2c_gpio
    - Explicitly include headers; syscon.h
    - Allow building as modules; max77693
    - Use IS_ENABLED() instead of rolling your own; dm355evm_msp, wm8400-core
    - DT adaptions; axp20x, hi655x, arizona, max77620
    - Remove CLK_IS_ROOT flag; intel-lpss, intel_quark
    - Move to gpiochip API; asic3, dm355evm_msp, htc-egpio, htc-i2cpld, sm501,
 				  tc6393xb, tps65010, ucb1x00, vexpress
    - Make use of devm_mfd_* calls; act8945a, as3711, atmel-hlcdc, bcm590xx,
 				   hi6421-pmic-core, lp3943, menf21bmc, mt6397,
 				   rdc321x, rk808, rn5t618, rt5033, sky81452,
 				   stw481x, tps6507x, tps65217, wm8400,
  - Bug Fixes
    - Fix ACPI child matching; mfd-core
    - Fix start-up ordering issues; mt6397-core, arizona-core
    - Fix forgotten register state on resume; intel-lpss
    - Fix Clock related issues; twl6040
    - Fix scheduling whilst atomic; omap-usb-tll
    - Kconfig changes; vexpress
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXPzwAAAoJEFGvii+H/HdhkPEP/iTvgiL+CpAk7UwAhCNolR5j
 l3vb49lOlmqx87zELdToJmySAd/byiZN0YQEmcn+t4BCs/8CeaWeNkb8vltJvuac
 Fmz88bhXfgFYk87nx/6tRMvuM3fKXlk/YYRZkklV7mkBjcPLiqBZSi/MG/SV53a9
 A+vGW56B2/vHiUgTBkYs9UZNqkFCkmhuVYbHjtFwTfL84lwy9u4tNRrktss6g1lx
 Ak9uiDhaUP/vxKe/7/qCTZXgV/IYb2+tcNjMJ+Cztmyht8VTrhGSXbDPH7MyRYUI
 EBBWRXAQelR5qHxOYDSBNIemZe3AniCBp7tjqcwlN9cdE8q9pJxOk+0XStjC+XeW
 Qt1aIwQisk8jfII8BIGr2pAzc8Jh9/TtcK+wKMRQ2o5g2tvcG90hHIJWQlbdy4ST
 SX799w0KvTItdaMhTHThTOfJRj777v/H2cj8DBCCEeoBHOCHnzbJSIuKahPa9PM3
 W0dyZOpsDXoegyksjBUYjdhGoggjEdirt+oXJe4rY7UxeEml+YZS54fseVzgNzNq
 //Nxk1GMNOVXgo3NrlO8JTs2G5gFPc8VOuPW60G1fm8DyNW13RbUG74QPpSd4U7S
 zZM/OZ3D0E4nrPjXf/GCS3QRwM7p1ubiOgSTTZkaLJYGBcHSezGXK8XpFSNReRop
 Un13GPM09Sl9VN9a2Ybi
 =FSmn
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add new driver for MAXIM MAX77620/MAX20024 PMIC
   - Add new driver for Hisilicon HI665X PMIC

  New Device Support:
   - Add support for AXP809 in axp20x-rsb
   - Add support for Power Supply in axp20x

  New core features:
   - devm_mfd_* managed resources

  Fix-ups:
   - Remove unused code (da9063-irq, wm8400-core, tps6105x,
     smsc-ece1099, twl4030-power)
   - Improve clean-up in error path (intel_quark_i2c_gpio)
   - Explicitly include headers (syscon.h)
   - Allow building as modules (max77693)
   - Use IS_ENABLED() instead of rolling your own (dm355evm_msp,
     wm8400-core)
   - DT adaptions (axp20x, hi655x, arizona, max77620)
   - Remove CLK_IS_ROOT flag (intel-lpss, intel_quark)
   - Move to gpiochip API (asic3, dm355evm_msp, htc-egpio, htc-i2cpld,
     sm501, tc6393xb, tps65010, ucb1x00, vexpress)
   - Make use of devm_mfd_* calls (act8945a, as3711, atmel-hlcdc,
     bcm590xx, hi6421-pmic-core, lp3943, menf21bmc, mt6397, rdc321x,
     rk808, rn5t618, rt5033, sky81452, stw481x, tps6507x, tps65217,
     wm8400)

  Bug Fixes"
   - Fix ACPI child matching (mfd-core)
   - Fix start-up ordering issues (mt6397-core, arizona-core)
   - Fix forgotten register state on resume (intel-lpss)
   - Fix Clock related issues (twl6040)
   - Fix scheduling whilst atomic (omap-usb-tll)
   - Kconfig changes (vexpress)"

* tag 'mfd-for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
  mfd: hi655x: Add MFD driver for hi655x
  mfd: ab8500-debugfs: Trivial fix of spelling mistake on "between"
  mfd: vexpress: Add !ARCH_USES_GETTIMEOFFSET dependency
  mfd: Add device-tree binding doc for PMIC MAX77620/MAX20024
  mfd: max77620: Add core driver for MAX77620/MAX20024
  mfd: arizona: Add defines for GPSW values that can be used from DT
  mfd: omap-usb-tll: Fix scheduling while atomic BUG
  mfd: wm5110: ARIZONA_CLOCK_CONTROL should be volatile
  mfd: axp20x: Add a cell for the ac power_supply part of the axp20x PMICs
  mfd: intel_soc_pmic_core: Terminate panel control GPIO lookup table correctly
  mfd: wl1273-core: Use devm_mfd_add_devices() for mfd_device registration
  mfd: tps65910: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  mfd: rc5t583: Use devm_mfd_add_devices and devm_request_threaded_irq
  mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  mfd: twl4030-power: Remove driver path in file comment
  MAINTAINERS: Add entry for X-Powers AXP family PMIC drivers
  mfd: smsc-ece1099: Remove unnecessarily remove callback
  mfd: Use IS_ENABLED(CONFIG_FOO) instead of checking FOO || FOO_MODULE
  ...
2016-05-20 11:10:24 -07:00
Stephen Boyd 0f7e70e7da mfd: intel-lpss: Remove CLK_IS_ROOT
This flag is a no-op now (see commit 47b0eeb3dc "clk: Deprecate
CLK_IS_ROOT", 2016-02-02) so remove it.

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09 08:21:02 +01:00
Heikki Krogerus 41a3da2b8e mfd: intel-lpss: Save register context on suspend
All configurations are lost and the registers will have
default values when the hardware is suspended and resumed,
so saving the private register space context on suspend, and
restoring it on resume.

Fixes: 4b45efe852 (mfd: Add support for Intel Sunrisepoint LPSS devices)
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09 08:20:54 +01:00
Heikki Krogerus f4d0526603 device property: don't bother the drivers with struct property_set
Since device_add_property_set() now always takes a copy of
the property_set, and also since the fwnode type is always
hard coded to be FWNODE_PDATA, there is no need for the
drivers to deliver the entire struct property_set. The
function can just create the instance of it on its own and
bind the properties from the drivers to it on the spot.

This renames device_add_property_set() to
device_add_properties(). The function now takes struct
property_entry as its parameter instead of struct
property_set.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09 03:10:50 +02:00
Andy Shevchenko 84cb36cac5 mfd: intel-lpss: Remove clock tree on error path
We forgot to remove the clock tree if something goes wrong in ->probe(). Add a
call to intel_lpss_unregister_clock() on error path in ->probe() to fix the
potential issue.

Fixes: 4b45efe852 (mfd: Add support for Intel Sunrisepoint LPSS devices)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-09 12:58:51 +07:00
Mika Westerberg e15ad2154b mfd: intel-lpss: Add support for passing device properties
If the boot firmware does not support ACPI we need a way to pass device
configuration information to the drivers. The unified device properties API
already supports passing platform data via properties so let's take
advantage of that and allow probe drivers to pass set of properties to the
host controller driver.

In order to do that we need to be able to modify the MFD cell corresponding
the host controller, so make the core driver to take copy of the cell
instead of using it directly. Then we can assign info->pset to the
resulting copy of a cell and let the MFD core to assign that to the
resulting device.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-07 02:29:23 +01:00
Linus Torvalds 9cf5c095b6 asm-generic cleanups
The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig
 to clean up various abuses of headers in there. The patch to rename the
 io-64-nonatomic-*.h headers caused some conflicts with new users, so I
 added a workaround that we can remove in the next merge window.
 
 The only other patch is a warning fix from Marek Vasut
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVjzaf2CrR//JCVInAQImmhAA20fZ91sUlnA5skKNPT1phhF6Z7UF2Sx5
 nPKcHQD3HA3lT1OKfPBYvCo+loYflvXFLaQThVylVcnE/8ecAEMtft4nnGW2nXvh
 sZqHIZ8fszTB53cynAZKTjdobD1wu33Rq7XRzg0ugn1mdxFkOzCHW/xDRvWRR5TL
 rdQjzzgvn2PNlqFfHlh6cZ5ykShM36AIKs3WGA0H0Y/aYsE9GmDOAUp41q1mLXnA
 4lKQaIxoeOa+kmlsUB0wEHUecWWWJH4GAP+CtdKzTX9v12bGNhmiKUMCETG78BT3
 uL8irSqaViNwSAS9tBxSpqvmVUsa5aCA5M3MYiO+fH9ifd7wbR65g/wq39D3Pc01
 KnZ3BNVRW5XSA3c86pr8vbg/HOynUXK8TN0lzt6rEk8bjoPBNEDy5YWzy0t6reVe
 wX65F+ver8upjOKe9yl2Jsg+5Kcmy79GyYjLUY3TU2mZ+dIdScy/jIWatXe/OTKZ
 iB4Ctc4MDe9GDECmlPOWf98AXqsBUuKQiWKCN/OPxLtFOeWBvi4IzvFuO8QvnL9p
 jZcRDmIlIWAcDX/2wMnLjV+Hqi3EeReIrYznxTGnO7HHVInF555GP51vFaG5k+SN
 smJQAB0/sostmC1OCCqBKq5b6/li95/No7+0v0SUhJJ5o76AR5CcNsnolXesw1fu
 vTUkB/I66Hk=
 =dQKG
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic cleanups from Arnd Bergmann:
 "The asm-generic changes for 4.4 are mostly a series from Christoph
  Hellwig to clean up various abuses of headers in there.  The patch to
  rename the io-64-nonatomic-*.h headers caused some conflicts with new
  users, so I added a workaround that we can remove in the next merge
  window.

  The only other patch is a warning fix from Marek Vasut"

* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h
  asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
  gpio-mxc: stop including <asm-generic/bug>
  n_tracesink: stop including <asm-generic/bug>
  n_tracerouter: stop including <asm-generic/bug>
  mlx5: stop including <asm-generic/kmap_types.h>
  hifn_795x: stop including <asm-generic/kmap_types.h>
  drbd: stop including <asm-generic/kmap_types.h>
  move count_zeroes.h out of asm-generic
  move io-64-nonatomic*.h out of asm-generic
2015-11-06 14:22:15 -08:00
Andy Shevchenko 689d4453ed mfd: intel-lpss: Use writeq() helper
There are already helper functions to do 64-bit I/O on 32-bit machines, thus we
don't need to reinvent the wheel. In our case we can't use readq() / writeq()
even on 64-bit kernel since there is a hardware limitation (OCP bus is a 32-bit
bus).

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-26 14:49:03 +00:00
Andy Shevchenko 4b45efe852 mfd: Add support for Intel Sunrisepoint LPSS devices
The new coming Intel platforms such as Skylake will contain Sunrisepoint PCH.
The main difference to the previous platforms is that the LPSS devices are
compound devices where usually main (SPI, HSUART, or I2C) and DMA IPs are
present.

This patch brings the driver for such devices found on Sunrisepoint PCH.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-28 09:56:47 +01:00