As context tracking subsystem evolved, it stopped using ignore_user_qs
and in_user defined in the rcu_dynticks structure. This commit therefore
removes them.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Small grammar fix in rcutree comment regarding 'rcu_scheduler_active'
var.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds event tracing for callback acceleration to allow better
tracking of callbacks through the system.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, callbacks are advanced each time the corresponding CPU
notices a change in its leaf rcu_node structure's ->completed value
(this value counts grace-period completions). This approach has worked
quite well, but with the advent of RCU_FAST_NO_HZ, we cannot count on
a given CPU seeing all the grace-period completions. When a CPU misses
a grace-period completion that occurs while it is in dyntick-idle mode,
this will delay invocation of its callbacks.
In addition, acceleration of callbacks (when RCU realizes that a given
callback need only wait until the end of the next grace period, rather
than having to wait for a partial grace period followed by a full
grace period) must be carried out extremely carefully. Insufficient
acceleration will result in unnecessarily long grace-period latencies,
while excessive acceleration will result in premature callback invocation.
Changes that involve this tradeoff are therefore among the most
nerve-wracking changes to RCU.
This commit therefore explicitly tags groups of callbacks with the
number of the grace period that they are waiting for. This means that
callback-advancement and callback-acceleration functions are idempotent,
so that excessive acceleration will merely waste a few CPU cycles. This
also allows a CPU to take full advantage of any grace periods that have
elapsed while it has been in dyntick-idle mode. It should also enable
simulataneous simplifications to and optimizations of RCU_FAST_NO_HZ.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It turns out that gcc 4.8 warns on array indexes being out of bounds
unless it can prove otherwise. It gives this warning on some RCU
initialization code. Because this is far from any fastpath, add
an explicit check for array bounds and panic if so. This gives the
compiler enough information to figure out that the array index is never
out of bounds.
However, if a similar false positive occurs on a fastpath, it will
probably be necessary to tell the compiler to keep its array-index
anxieties to itself. ;-)
Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This patch uses the real new value of dynticks_nesting instead of 0 in
rcu_eqs_enter_common().
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Both rcutiny and rcutree define a helper function named
rcu_is_cpu_rrupt_from_idle(), each used exactly once, later in the
same file. This commit therefore declares these helper functions static.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Create a new subsystem that probes on kernel boundaries
to keep track of the transitions between level contexts
with two basic initial contexts: user or kernel.
This is an abstraction of some RCU code that use such tracking
to implement its userspace extended quiescent state.
We need to pull this up from RCU into this new level of indirection
because this tracking is also going to be used to implement an "on
demand" generic virtual cputime accounting. A necessary step to
shutdown the tick while still accounting the cputime.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
[ paulmck: fix whitespace error and email address. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU callback execution can add significant OS jitter and also can
degrade both scheduling latency and, in asymmetric multiprocessors,
energy efficiency. This commit therefore adds the ability for selected
CPUs ("rcu_nocbs=" boot parameter) to have their callbacks offloaded
to kthreads. If the "rcu_nocb_poll" boot parameter is also specified,
these kthreads will do polling, removing the need for the offloaded
CPUs to do wakeups. At least one CPU must be doing normal callback
processing: currently CPU 0 cannot be selected as a no-CBs CPU.
In addition, attempts to offline the last normal-CBs CPU will fail.
This feature was inspired by Jim Houston's and Joe Korty's JRCU, and
this commit includes fixes to problems located by Fengguang Wu's
kbuild test robot.
[ paulmck: Added gfp.h include file as suggested by Fengguang Wu. ]
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
urgent.2012.10.27a: Fix for RCU user-mode transition (already in -tip).
doc.2012.11.08a: Documentation updates, most notably codifying the
memory-barrier guarantees inherent to grace periods.
fixes.2012.11.13a: Miscellaneous fixes.
srcu.2012.10.27a: Allow statically allocated and initialized srcu_struct
structures (courtesy of Lai Jiangshan).
stall.2012.11.13a: Add more diagnostic information to RCU CPU stall
warnings, also decrease from 60 seconds to 21 seconds.
hotplug.2012.11.08a: Minor updates to CPU hotplug handling.
tracing.2012.11.08a: Improved debugfs tracing, courtesy of Michael Wang.
idle.2012.10.24a: Updates to RCU idle/adaptive-idle handling, including
a boot parameter that maps normal grace periods to expedited.
Resolved conflict in kernel/rcutree.c due to side-by-side change.
This commit explicitly states the memory-ordering properties of the
RCU grace-period primitives. Although these properties were in some
sense implied by the fundmental property of RCU ("a grace period must
wait for all pre-existing RCU read-side critical sections to complete"),
stating it explicitly will be a great labor-saving device.
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Commit 29c00b4a1d (rcu: Add event-tracing for RCU callback
invocation) added a regression in rcu_do_batch()
Under stress, RCU is supposed to allow to process all items in queue,
instead of a batch of 10 items (blimit), but an integer overflow makes
the effective limit being 1. So, unless there is frequent idle periods
(during which RCU ignores batch limits), RCU can be forced into a
state where it cannot keep up with the callback-generation rate,
eventually resulting in OOM.
This commit therefore converts a few variables in rcu_do_batch() from
int to long to fix this problem, along with the module parameters
controlling the batch limits.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # 3.2 +
The rcu_state structure's ->completed field is unsigned long, so this
commit adjusts show_one_rcugp()'s printf() format to suit. Also add
the required ACCESS_ONCE() directives while we are in this function.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds the counters to rcu_state and updates them in
synchronize_rcu_expedited() to provide the data needed for debugfs
tracing.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tracing (debugfs) of expedited RCU primitives is required, which in turn
requires that the relevant data be located where the tracing code can find
it, not in its current static global variables in kernel/rcutree.c.
This commit therefore moves sync_sched_expedited_started and
sync_sched_expedited_done to the rcu_state structure, as fields
->expedited_start and ->expedited_done, respectively.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is a counter scheme similar to ticket locking that
synchronize_sched_expedited() uses to service multiple concurrent
callers with the same expedited grace period. Upon entry, a
sync_sched_expedited_started variable is atomically incremented,
and upon completion of a expedited grace period a separate
sync_sched_expedited_done variable is atomically incremented.
However, if a synchronize_sched_expedited() is delayed while
in try_stop_cpus(), concurrent invocations will increment the
sync_sched_expedited_started counter, which will eventually overflow.
If the original synchronize_sched_expedited() resumes execution just
as the counter overflows, a concurrent invocation could incorrectly
conclude that an expedited grace period elapsed in zero time, which
would be bad. One could rely on counter size to prevent this from
happening in practice, but the goal is to formally validate this
code, so it needs to be fixed anyway.
This commit therefore checks the gap between the two counters before
incrementing sync_sched_expedited_started, and if the gap is too
large, does a normal grace period instead. Overflow is thus only
possible if there are more than about 3.5 billion threads on 32-bit
systems, which can be excluded until such time as task_struct fits
into a single byte and 4G/4G patches are accepted into mainline.
It is also easy to encode this limitation into mechanical theorem
provers.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The ->onofflock field in the rcu_state structure at one time synchronized
CPU-hotplug operations for RCU. However, its scope has decreased over time
so that it now only protects the lists of orphaned RCU callbacks. This
commit therefore renames it to ->orphan_lock to reflect its current use.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In theory, if a grace period manages to get started despite there being
no callbacks on any of the CPUs, all CPUs could go into dyntick-idle
mode, so that the grace period would never end. This commit updates
the RCU CPU stall warning messages to detect this condition by summing
up the number of callbacks on all CPUs.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit causes the last grace period started and completed to be
printed on RCU CPU stall warning messages in order to aid diagnosis.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The RCU CPU stall warnings rely on trigger_all_cpu_backtrace() to
do NMI-based dump of the stack traces of all CPUs. Unfortunately, a
number of architectures do not implement trigger_all_cpu_backtrace(), in
which case RCU falls back to just dumping the stack of the running CPU.
This is unhelpful in the case where the running CPU has detected that
some other CPU has stalled.
This commit therefore makes the running CPU dump the stacks of the
tasks running on the stalled CPUs.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The fix introduced by a10d206e (rcu: Fix day-one dyntick-idle
stall-warning bug) has a C-language precedence error. It turns out
that this error is harmless in that the same result is computed for all
inputs, but the code is nevertheless a potential source of confusion.
This commit therefore introduces parentheses in order to force the
execution of the code to reflect the intent.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There have been some embedded applications that would benefit from
use of expedited grace-period primitives. In some ways, this is
similar to synchronize_net() doing either a normal or an expedited
grace period depending on lock state, but with control outside of
the kernel.
This commit therefore adds rcu_expedited boot and sysfs parameters
that cause the kernel to substitute expedited primitives for the
normal grace-period primitives.
[ paulmck: Add trace/event/rcu.h to kernel/srcu.c to avoid build error.
Get rid of infinite loop through contention path.]
Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In the old days, _rcu_barrier() acquired ->onofflock to exclude
rcu_send_cbs_to_orphanage(), which allowed the latter to avoid memory
barriers in callback handling. However, _rcu_barrier() recently started
doing get_online_cpus() to lock out CPU-hotplug operations entirely, which
means that the comment in rcu_send_cbs_to_orphanage() that talks about
->onofflock is now obsolete. This commit therefore fixes the comment.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because grace-period initialization is carried out by a separate
kthread, it might happen on a different CPU than the one that
had the callback needing a grace period -- which is where the
callback acceleration needs to happen.
Fortunately, rcu_start_gp() holds the root rcu_node structure's
->lock, which prevents a new grace period from starting. This
allows this function to safely determine that a grace period has
not yet started, which in turn allows it to fully accelerate any
callbacks that it has pending. This commit adds this acceleration.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Kirill noted the following deadlock cycle on shutdown involving padata:
> With commit 755609a908 I've got deadlock on
> poweroff.
>
> It guess it happens because of race for cpu_hotplug.lock:
>
> CPU A CPU B
> disable_nonboot_cpus()
> _cpu_down()
> cpu_hotplug_begin()
> mutex_lock(&cpu_hotplug.lock);
> __cpu_notify()
> padata_cpu_callback()
> __padata_remove_cpu()
> padata_replace()
> synchronize_rcu()
> rcu_gp_kthread()
> get_online_cpus();
> mutex_lock(&cpu_hotplug.lock);
It would of course be good to eliminate grace-period delays from
CPU-hotplug notifiers, but that is a separate issue. Deadlock is
not an appropriate diagnostic for excessive CPU-hotplug latency.
Fortunately, grace-period initialization does not actually need to
exclude all of the CPU-hotplug operation, but rather only RCU's own
CPU_UP_PREPARE and CPU_DEAD CPU-hotplug notifiers. This commit therefore
introduces a new per-rcu_state onoff_mutex that provides the required
concurrency control in place of the get_online_cpus() that was previously
in rcu_gp_init().
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Checking "user" before "is_idle_task()" allows better optimizations
in cases where inlining is possible. Also, "bool" should be passed
"true" or "false" rather than "1" or "0". This commit therefore makes
these changes, as noted in Josh's review.
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Provide a config option that enables the userspace
RCU extended quiescent state on every CPUs by default.
This is for testing purpose.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Clear the syscalls hook of a task when it's scheduled out so that if
the task migrates, it doesn't run the syscall slow path on a CPU
that might not need it.
Also set the syscalls hook on the next task if needed.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
By default we don't want to enter into RCU extended quiescent
state while in userspace because doing this produces some overhead
(eg: use of syscall slowpath). Set it off by default and ready to
run when some feature like adaptive tickless need it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Allow calls to rcu_user_enter() even if we are already
in userspace (as seen by RCU) and allow calls to rcu_user_exit()
even if we are already in the kernel.
This makes the APIs more flexible to be called from architectures.
Exception entries for example won't need to know if they come from
userspace before calling rcu_user_exit().
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Create a new config option under the RCU menu that put
CPUs under RCU extended quiescent state (as in dynticks
idle mode) when they run in userspace. This require
some contribution from architectures to hook into kernel
and userspace boundaries.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In some cases, it is necessary to enter or exit userspace-RCU-idle mode
from an interrupt handler, for example, if some other CPU sends this
CPU a resched IPI. In this case, the current CPU would enter the IPI
handler in userspace-RCU-idle mode, but would need to exit the IPI handler
after having exited that mode.
To allow this to work, this commit adds two new APIs to TREE_RCU:
- rcu_user_enter_after_irq(). This must be called from an interrupt between
rcu_irq_enter() and rcu_irq_exit(). After the irq calls rcu_irq_exit(),
the irq handler will return into an RCU extended quiescent state.
In theory, this interrupt is never a nested interrupt, but in practice
it might interrupt softirq, which looks to RCU like a nested interrupt.
- rcu_user_exit_after_irq(). This must be called from a non-nesting
interrupt, interrupting an RCU extended quiescent state, also
between rcu_irq_enter() and rcu_irq_exit(). After the irq calls
rcu_irq_exit(), the irq handler will return in an RCU non-quiescent
state.
[ Combined with "Allow calls to rcu_exit_user_irq from nesting irqs." ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
RCU currently insists that only idle tasks can enter RCU idle mode, which
prohibits an adaptive tickless kernel (AKA nohz cpusets), which in turn
would mean that usermode execution would always take scheduling-clock
interrupts, even when there is only one task runnable on the CPU in
question.
This commit therefore adds rcu_user_enter() and rcu_user_exit(), which
allow non-idle tasks to enter RCU idle mode. These are quite similar
to rcu_idle_enter() and rcu_idle_exit(), respectively, except that they
omit the idle-task checks.
[ Updated to use "user" flag rather than separate check functions. ]
[ paulmck: Updated to drop exports of new functions based on Josh's patch
getting rid of the need for them. ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The conflicts between kernel/rcutree.h and kernel/rcutree_plugin.h
were due to adjacent insertions and deletions, which were resolved
by simply accepting the changes on both branches.
bigrt.2012.09.23a contains additional commits to reduce scheduling latency
from RCU on huge systems (many hundrends or thousands of CPUs).
doctorture.2012.09.23a contains documentation changes and rcutorture fixes.
fixes.2012.09.23a contains miscellaneous fixes.
hotplug.2012.09.23a contains CPU-hotplug-related changes.
idle.2012.09.23a fixes architectures for which RCU no longer considered
the idle loop to be a quiescent state due to earlier
adaptive-dynticks changes. Affected architectures are alpha,
cris, frv, h8300, m32r, m68k, mn10300, parisc, score, xtensa,
and ia64.
Posting a callback after the CPU_DEAD notifier effectively leaks
that callback unless/until that CPU comes back online. Silence is
unhelpful when attempting to track down such leaks, so this commit emits
a WARN_ON_ONCE() and unconditionally leaks the callback when an offline
CPU attempts to register a callback. The rdp->nxttail[RCU_NEXT_TAIL] is
set to NULL in the CPU_DEAD notifier and restored in the CPU_UP_PREPARE
notifier, allowing _call_rcu() to determine exactly when posting callbacks
is illegal.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, _rcu_barrier() relies on preempt_disable() to prevent
any CPU from going offline, which in turn depends on CPU hotplug's
use of __stop_machine().
This patch therefore makes _rcu_barrier() use get_online_cpus() to
block CPU-hotplug operations. This has the added benefit of removing
the need for _rcu_barrier() to adopt callbacks: Because CPU-hotplug
operations are excluded, there can be no callbacks to adopt. This
commit simplifies the code accordingly.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The first memory barrier in __call_rcu() is supposed to order any
updates done beforehand by the caller against the actual queuing
of the callback. However, the second memory barrier (which is intended
to order incrementing the queue lengths before queuing the callback)
is also between the caller's updates and the queuing of the callback.
The second memory barrier can therefore serve both purposes.
This commit therefore removes the first memory barrier.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
If a given CPU avoids the idle loop but also avoids starting a new
RCU grace period for a full minute, RCU can issue spurious RCU CPU
stall warnings. This commit fixes this issue by adding a check for
ongoing grace period to avoid these spurious stall warnings.
Reported-by: Becky Bruce <bgillbruce@gmail.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The print_other_cpu_stall() function accesses a number of rcu_node
fields without protection from the ->lock. In theory, this is not
a problem because the fields accessed are all integers, but in
practice the compiler can get nasty. Therefore, the commit extends
the existing critical section to cover the entire loop body.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_implicit_offline_qs() function implicitly assumed that execution
would progress predictably when interrupts are disabled, which is of course
not guaranteed when running on a hypervisor. Furthermore, this function
is short, and is called from one place only in a short function.
This commit therefore ensures that the timing is checked before
checking the condition, which guarantees correct behavior even given
indefinite delays. It also inlines rcu_implicit_offline_qs() into
rcu_implicit_dynticks_qs().
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, rcu_init_geometry() only reshapes RCU's combining trees
if the leaf fanout is changed at boot time. This means that by
default, kernels compiled with (say) NR_CPUS=4096 will keep oversized
data structures, even when running on systems with (say) four CPUs.
This commit therefore checks to see if the maximum number of CPUs on
the actual running system (nr_cpu_ids) differs from NR_CPUS, and if so
reshapes the combining trees accordingly.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If CONFIG_RCU_FANOUT_EXACT=y, if there are not enough CPUs (according
to nr_cpu_ids) to require more than a single rcu_node structure, but if
NR_CPUS is larger than would fit into a single rcu_node structure, then
the current rcu_init_levelspread() code is subject to integer overflow
in the eight-bit ->levelspread[] array in the rcu_state structure.
In this case, the solution is -not- to increase the size of the
elements in this array because the values in that array should be
constrained to the number of bits in an unsigned long. Instead, this
commit replaces NR_CPUS with nr_cpu_ids in the rcu_init_levelspread()
function's initialization of the cprv local variable. This results in
all of the arithmetic being consistently based off of the nr_cpu_ids
value, thus avoiding the overflow, which was caused by the mixing of
nr_cpu_ids and NR_CPUS.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current quiescent-state detection algorithm is needlessly
complex. It records the grace-period number corresponding to
the quiescent state at the time of the quiescent state, which
works, but it seems better to simply erase any record of previous
quiescent states at the time that the CPU notices the new grace
period. This has the further advantage of removing another piece
of RCU for which lockless reasoning is required.
Therefore, this commit makes this change.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Now that the rcu_node structures' ->completed fields are unconditionally
assigned at grace-period cleanup time, they should already have the
correct value for the new grace period at grace-period initialization
time. This commit therefore inserts a WARN_ON_ONCE() to verify this
invariant.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Preemption greatly raised the probability of certain types of race
conditions, so this commit adds an anti-heisenbug to greatly increase
the collision cross section, also known as the probability of occurrence.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The current approach to grace-period initialization is vulnerable to
extremely low-probability races. These races stem from the fact that
the old grace period is marked completed on the same traversal through
the rcu_node structure that is marking the start of the new grace period.
This means that some rcu_node structures will believe that the old grace
period is still in effect at the same time that other rcu_node structures
believe that the new grace period has already started.
These sorts of disagreements can result in too-short grace periods,
as shown in the following scenario:
1. CPU 0 completes a grace period, but needs an additional
grace period, so starts initializing one, initializing all
the non-leaf rcu_node structures and the first leaf rcu_node
structure. Because CPU 0 is both completing the old grace
period and starting a new one, it marks the completion of
the old grace period and the start of the new grace period
in a single traversal of the rcu_node structures.
Therefore, CPUs corresponding to the first rcu_node structure
can become aware that the prior grace period has completed, but
CPUs corresponding to the other rcu_node structures will see
this same prior grace period as still being in progress.
2. CPU 1 passes through a quiescent state, and therefore informs
the RCU core. Because its leaf rcu_node structure has already
been initialized, this CPU's quiescent state is applied to the
new (and only partially initialized) grace period.
3. CPU 1 enters an RCU read-side critical section and acquires
a reference to data item A. Note that this CPU believes that
its critical section started after the beginning of the new
grace period, and therefore will not block this new grace period.
4. CPU 16 exits dyntick-idle mode. Because it was in dyntick-idle
mode, other CPUs informed the RCU core of its extended quiescent
state for the past several grace periods. This means that CPU 16
is not yet aware that these past grace periods have ended. Assume
that CPU 16 corresponds to the second leaf rcu_node structure --
which has not yet been made aware of the new grace period.
5. CPU 16 removes data item A from its enclosing data structure
and passes it to call_rcu(), which queues a callback in the
RCU_NEXT_TAIL segment of the callback queue.
6. CPU 16 enters the RCU core, possibly because it has taken a
scheduling-clock interrupt, or alternatively because it has
more than 10,000 callbacks queued. It notes that the second
most recent grace period has completed (recall that because it
corresponds to the second as-yet-uninitialized rcu_node structure,
it cannot yet become aware that the most recent grace period has
completed), and therefore advances its callbacks. The callback
for data item A is therefore in the RCU_NEXT_READY_TAIL segment
of the callback queue.
7. CPU 0 completes initialization of the remaining leaf rcu_node
structures for the new grace period, including the structure
corresponding to CPU 16.
8. CPU 16 again enters the RCU core, again, possibly because it has
taken a scheduling-clock interrupt, or alternatively because
it now has more than 10,000 callbacks queued. It notes that
the most recent grace period has ended, and therefore advances
its callbacks. The callback for data item A is therefore in
the RCU_DONE_TAIL segment of the callback queue.
9. All CPUs other than CPU 1 pass through quiescent states. Because
CPU 1 already passed through its quiescent state, the new grace
period completes. Note that CPU 1 is still in its RCU read-side
critical section, still referencing data item A.
10. Suppose that CPU 2 wais the last CPU to pass through a quiescent
state for the new grace period, and suppose further that CPU 2
did not have any callbacks queued, therefore not needing an
additional grace period. CPU 2 therefore traverses all of the
rcu_node structures, marking the new grace period as completed,
but does not initialize a new grace period.
11. CPU 16 yet again enters the RCU core, yet again possibly because
it has taken a scheduling-clock interrupt, or alternatively
because it now has more than 10,000 callbacks queued. It notes
that the new grace period has ended, and therefore advances
its callbacks. The callback for data item A is therefore in
the RCU_DONE_TAIL segment of the callback queue. This means
that this callback is now considered ready to be invoked.
12. CPU 16 invokes the callback, freeing data item A while CPU 1
is still referencing it.
This scenario represents a day-zero bug for TREE_RCU. This commit
therefore ensures that the old grace period is marked completed in
all leaf rcu_node structures before a new grace period is marked
started in any of them.
That said, it would have been insanely difficult to force this race to
happen before the grace-period initialization process was preemptible.
Therefore, this commit is not a candidate for -stable.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Conflicts:
kernel/rcutree.c
The module parameters blimit, qhimark, and qlomark (and more
recently, rcu_fanout_leaf) have permission masks of zero, so
that their values are not visible from sysfs. This is unnecessary
and inconvenient to administrators who might like an easy way to
see what these values are on a running system. This commit therefore
sets their permission masks to 0444, allowing them to be read but
not written.
Reported-by: Rusty Russell <rusty@ozlabs.org>
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Although almost everyone is well-served by the defaults, some uses of RCU
benefit from shorter grace periods, while others benefit more from the
greater efficiency provided by longer grace periods. Situations requiring
a large number of grace periods to elapse (and wireshark startup has
been called out as an example of this) are helped by lower-latency
grace periods. Furthermore, in some embedded applications, people are
willing to accept a small degradation in update efficiency (due to there
being more of the shorter grace-period operations) in order to gain the
lower latency.
In contrast, those few systems with thousands of CPUs need longer grace
periods because the CPU overhead of a grace period rises roughly
linearly with the number of CPUs. Such systems normally do not make
much use of facilities that require large numbers of grace periods to
elapse, so this is a good tradeoff.
Therefore, this commit allows the durations to be controlled from sysfs.
There are two sysfs parameters, one named "jiffies_till_first_fqs" that
specifies the delay in jiffies from the end of grace-period initialization
until the first attempt to force quiescent states, and the other named
"jiffies_till_next_fqs" that specifies the delay (again in jiffies)
between subsequent attempts to force quiescent states. They both default
to three jiffies, which is compatible with the old hard-coded behavior.
At some future time, it may be possible to automatically increase the
grace-period length with the number of CPUs, but we do not yet have
sufficient data to do a good job. Preliminary data indicates that we
should add an addiitonal jiffy to each of the delays for every 200 CPUs
in the system, but more experimentation is needed. For now, the number
of systems with more than 1,000 CPUs is small enough that this can be
relegated to boot-time hand tuning.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Large systems running RCU_FAST_NO_HZ kernels see extreme memory
contention on the rcu_state structure's ->fqslock field. This
can be avoided by disabling RCU_FAST_NO_HZ, either at compile time
or at boot time (via the nohz kernel boot parameter), but large
systems will no doubt become sensitive to energy consumption.
This commit therefore uses a combining-tree approach to spread the
memory contention across new cache lines in the leaf rcu_node structures.
This can be thought of as a tournament lock that has only a try-lock
acquisition primitive.
The effect on small systems is minimal, because such systems have
an rcu_node "tree" consisting of a single node. In addition, this
functionality is not used on fastpaths.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
RCU quiescent-state forcing is currently carried out without preemption
points, which can result in excessive latency spikes on large systems
(many hundreds or thousands of CPUs). This patch therefore inserts
a voluntary preemption point into force_qs_rnp(), which should greatly
reduce the magnitude of these spikes.
Reported-by: Mike Galbraith <mgalbraith@suse.de>
Reported-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
As the first step towards allowing quiescent-state forcing to be
preemptible, this commit moves RCU quiescent-state forcing into the
same kthread that is now used to initialize and clean up after grace
periods. This is yet another step towards keeping scheduling
latency down to a dull roar.
Updated to change from raw_spin_lock_irqsave() to raw_spin_lock_irq()
and to remove the now-unused rcu_state structure fields as suggested by
Peter Zijlstra.
Reported-by: Mike Galbraith <mgalbraith@suse.de>
Reported-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Earlier versions of RCU invoked the RCU core from the CPU_DYING notifier
in order to note a quiescent state for the outgoing CPU. Because the
CPU is marked "offline" during the execution of the CPU_DYING notifiers,
the RCU core had to tolerate being invoked from an offline CPU. However,
commit b1420f1c (Make rcu_barrier() less disruptive) left only tracing
code in the CPU_DYING notifier, so the RCU core need no longer execute
on offline CPUs. This commit therefore enforces this restriction.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Then rcu_gp_kthread() function is too large and furthermore needs to
have the force_quiescent_state() code pulled in. This commit therefore
breaks up rcu_gp_kthread() into rcu_gp_init() and rcu_gp_cleanup().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
RCU grace-period cleanup is currently carried out with interrupts
disabled, which can result in excessive latency spikes on large systems
(many hundreds or thousands of CPUs). This patch therefore makes the
RCU grace-period cleanup be preemptible, including voluntary preemption
points, which should eliminate those latency spikes. Similar spikes from
forcing of quiescent states will be dealt with similarly by later patches.
Updated to replace uses of spin_lock_irqsave() with spin_lock_irq(), as
suggested by Peter Zijlstra.
Reported-by: Mike Galbraith <mgalbraith@suse.de>
Reported-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
As a first step towards allowing grace-period cleanup to be preemptible,
this commit moves the RCU grace-period cleanup into the same kthread
that is now used to initialize grace periods. This is needed to keep
scheduling latency down to a dull roar.
[ paulmck: Get rid of stray spin_lock_irqsave() calls. ]
Reported-by: Mike Galbraith <mgalbraith@suse.de>
Reported-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
RCU grace-period initialization is currently carried out with interrupts
disabled, which can result in 200-microsecond latency spikes on systems
on which RCU has been configured for 4096 CPUs. This patch therefore
makes the RCU grace-period initialization be preemptible, which should
eliminate those latency spikes. Similar spikes from grace-period cleanup
and the forcing of quiescent states will be dealt with similarly by later
patches.
Reported-by: Mike Galbraith <mgalbraith@suse.de>
Reported-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The next step in reducing RCU's grace-period initialization latency on
large systems will make this initialization preemptible. Unfortunately,
making the grace-period initialization subject to interrupts (let alone
preemption) exposes the following race on systems whose rcu_node tree
contains more than one node:
1. CPU 31 starts initializing the grace period, including the
first leaf rcu_node structures, and is then preempted.
2. CPU 0 refers to the first leaf rcu_node structure, and notes
that a new grace period has started. It passes through a
quiescent state shortly thereafter, and informs the RCU core
of this rite of passage.
3. CPU 0 enters an RCU read-side critical section, acquiring
a pointer to an RCU-protected data item.
4. CPU 31 takes an interrupt whose handler removes the data item
referenced by CPU 0 from the data structure, and registers an
RCU callback in order to free it.
5. CPU 31 resumes initializing the grace period, including its
own rcu_node structure. In invokes rcu_start_gp_per_cpu(),
which advances all callbacks, including the one registered
in #4 above, to be handled by the current grace period.
6. The remaining CPUs pass through quiescent states and inform
the RCU core, but CPU 0 remains in its RCU read-side critical
section, still referencing the now-removed data item.
7. The grace period completes and all the callbacks are invoked,
including the one that frees the data item that CPU 0 is still
referencing. Oops!!!
One way to avoid this race is to remove grace-period acceleration from
rcu_start_gp_per_cpu(). Now, the only reason for this acceleration was
to allow CPUs bringing RCU out of idle state to have their callbacks
invoked after only one grace period, rather than the two grace periods
that would otherwise be required. But this acceleration does not
work when RCU grace-period initialization is moved to a kthread because
the CPU posting the callback is no longer necessarily the CPU that is
initializing the resulting grace period.
This commit therefore removes this now-pointless (and soon to be dangerous)
grace-period acceleration, thus avoiding the above race.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
As the first step towards allowing grace-period initialization to be
preemptible, this commit moves the RCU grace-period initialization
into its own kthread. This is needed to keep large-system scheduling
latency at reasonable levels.
Also change raw_spin_lock_irqsave() to raw_spin_lock_irq() as suggested
by Peter Zijlstra in review comments.
Reported-by: Mike Galbraith <mgalbraith@suse.de>
Reported-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Each grace period is supposed to have at least one callback waiting
for that grace period to complete. However, if CONFIG_NO_HZ=n, an
extra callback-free grace period is no big problem -- it will chew up
a tiny bit of CPU time, but it will complete normally. In contrast,
CONFIG_NO_HZ=y kernels have the potential for all the CPUs to go to
sleep indefinitely, in turn indefinitely delaying completion of the
callback-free grace period. Given that nothing is waiting on this grace
period, this is also not a problem.
That is, unless RCU CPU stall warnings are also enabled, as they are
in recent kernels. In this case, if a CPU wakes up after at least one
minute of inactivity, an RCU CPU stall warning will result. The reason
that no one noticed until quite recently is that most systems have enough
OS noise that they will never remain absolutely idle for a full minute.
But there are some embedded systems with cut-down userspace configurations
that consistently get into this situation.
All this begs the question of exactly how a callback-free grace period
gets started in the first place. This can happen due to the fact that
CPUs do not necessarily agree on which grace period is in progress.
If a CPU still believes that the grace period that just completed is
still ongoing, it will believe that it has callbacks that need to wait for
another grace period, never mind the fact that the grace period that they
were waiting for just completed. This CPU can therefore erroneously
decide to start a new grace period. Note that this can happen in
TREE_RCU and TREE_PREEMPT_RCU even on a single-CPU system: Deadlock
considerations mean that the CPU that detected the end of the grace
period is not necessarily officially informed of this fact for some time.
Once this CPU notices that the earlier grace period completed, it will
invoke its callbacks. It then won't have any callbacks left. If no
other CPU has any callbacks, we now have a callback-free grace period.
This commit therefore makes CPUs check more carefully before starting a
new grace period. This new check relies on an array of tail pointers
into each CPU's list of callbacks. If the CPU is up to date on which
grace periods have completed, it checks to see if any callbacks follow
the RCU_DONE_TAIL segment, otherwise it checks to see if any callbacks
follow the RCU_WAIT_TAIL segment. The reason that this works is that
the RCU_WAIT_TAIL segment will be promoted to the RCU_DONE_TAIL segment
as soon as the CPU is officially notified that the old grace period
has ended.
This change is to cpu_needs_another_gp(), which is called in a number
of places. The only one that really matters is in rcu_start_gp(), where
the root rcu_node structure's ->lock is held, which prevents any
other CPU from starting or completing a grace period, so that the
comparison that determines whether the CPU is missing the completion
of a grace period is stable.
Reported-by: Becky Bruce <bgillbruce@gmail.com>
Reported-by: Subodh Nijsure <snijsure@grid-net.com>
Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Walmsley <paul@pwsan.com> # OMAP3730, OMAP4430
Cc: stable@vger.kernel.org
Bring RCU into the new-age CPU-hotplug fold by modifying RCU's per-CPU
kthread code to use the new smp_hotplug_thread facility.
[ tglx: Adapted it to use callbacks and to the simplified rcu yield ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20120716103948.673354828@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The rcu_yield() code is amazing. It's there to avoid starvation of the
system when lots of (boosting) work is to be done.
Now looking at the code it's functionality is:
Make the thread SCHED_OTHER and very nice, i.e. get it out of the way
Arm a timer with 2 ticks
schedule()
Now if the system goes idle the rcu task returns, regains SCHED_FIFO
and plugs on. If the systems stays busy the timer fires and wakes a
per node kthread which in turn makes the per cpu thread SCHED_FIFO and
brings it back on the cpu. For the boosting thread the "make it FIFO"
bit is missing and it just runs some magic boost checks. Now this is a
lot of code with extra threads and complexity.
It's way simpler to let the tasks when they detect overload schedule
away for 2 ticks and defer the normal wakeup as long as they are in
yielded state and the cpu is not idle.
That solves the same problem and the only difference is that when the
cpu goes idle it's not guaranteed that the thread returns right away,
but it won't be longer out than two ticks, so no harm is done. If
that's an issue than it is way simpler just to wake the task from
idle as RCU has callbacks there anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The Linux kernel coding style says that single-statement blocks should
omit curly braces unless the other leg of the "if" statement has
multiple statements, in which case the curly braces should be included.
This commit fixes RCU's violations of this rule.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
bigrtm: First steps towards getting RCU out of the way of
tens-of-microseconds real-time response on systems compiled
with NR_CPUS=4096. Also cleanups for and increased concurrency
of rcu_barrier() family of primitives.
doctorture: rcutorture and documentation improvements.
fixes: Miscellaneous fixes.
fnh: RCU_FAST_NO_HZ fixes and improvements.
The recent bug that introduced the RCU callback list/count mismatch
showed the need for a diagnostic to check for this, which this commit
adds.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Problems in RCU idle entry and exit are almost always confined to the
offending CPU. This commit therefore switches ftrace_dump() from
DUMP_ALL to DUMP_ORIG.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
If a CPU goes offline with callbacks queued, those callbacks might be
indefinitely postponed, which can result in a system hang. This commit
therefore inserts warnings for this condition.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It is time to optimize CONFIG_TREE_PREEMPT_RCU's synchronize_rcu()
for uniprocessor optimization, which means that rcu_blocking_is_gp()
can no longer rely on RCU read-side critical sections having disabled
preemption. This commit therefore disables preemption across
rcu_blocking_is_gp()'s scan of the cpu_online_mask.
(Updated from previous version to fix embarrassing bug spotted by
Wu Fengguang.)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The __call_rcu() function is a bit overweight, so this commit splits
it into actual enqueuing of and accounting for the callback (__call_rcu())
and associated RCU-core processing (__call_rcu_core()).
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The __call_rcu() function will invoke the RCU core, for example, if
it detects that the current CPU has too many callbacks. However, this
can happen on an offline CPU that is on its way to the idle loop, in
which case it is an error to invoke the RCU core, and the excess callbacks
will be adopted in any case. This commit therefore adds checks to
__call_rcu() for running on an offline CPU, refraining from invoking
the RCU core in this case.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Although __call_rcu() is handled correctly when called from a momentary
non-idle period, if it is called on a CPU that RCU believes to be idle
on RCU_FAST_NO_HZ kernels, the callback might be indefinitely postponed.
This commit therefore ensures that RCU is aware of the new callback and
has a chance to force the CPU out of dyntick-idle mode when a new callback
is posted.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The _rcu_barrier() function accesses other CPUs' rcu_data structure's
->qlen field without benefit of locking. This commit therefore adds
the required ACCESS_ONCE() wrappers around accesses and updates that
need it.
ACCESS_ONCE() is not needed when a CPU accesses its own ->qlen, or
in code that cannot run while _rcu_barrier() is sampling ->qlen fields.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
There are a couple of open-coded initializations of the rcu_data
structure's RCU callback list. This commit therefore consolidates
them into a new init_callback_list() function.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The code that attempts to identify stalls that end just as we detect
them is broken by both flavors of initialization failure. This commit
therefore properly initializes and computes the count of the number
of reasons why the RCU grace period is stalled.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Before RCU had unified idle, the RCU_SAVE_DYNTICK leg of the switch
statement in force_quiescent_state() was dead code for CONFIG_NO_HZ=n
kernel builds. With unified idle, the code is never dead. This commit
therefore removes the "if" statement designed to make gcc aware of when
the code was and was not dead.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The arrival of TREE_PREEMPT_RCU some years back included some ugly
code involving either #ifdef or #ifdef'ed wrapper functions to iterate
over all non-SRCU flavors of RCU. This commit therefore introduces
a for_each_rcu_flavor() iterator over the rcu_state structures for each
flavor of RCU to clean up a bit of the ugliness.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
With the advent of __this_cpu_ptr(), it is no longer necessary to pass
both the rcu_state and rcu_data structures into __rcu_process_callbacks().
This commit therefore computes the rcu_data pointer from the rcu_state
pointer within __rcu_process_callbacks() so that callers can pass in
only the pointer to the rcu_state structure. This paves the way for
linking the rcu_state structures together and iterating over them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds event tracing for _rcu_barrier() execution. This
is defined only if RCU_TRACE=y.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The traditional rcu_barrier() implementation has serialized all requests,
regardless of RCU flavor, and also does not coalesce concurrent requests.
In the past, this has been good and sufficient.
However, systems are getting larger and use of rcu_barrier() has been
increasing. This commit therefore introduces a counter-based scheme
that allows _rcu_barrier() calls for the same flavor of RCU to take
advantage of each others' work.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
For global variables, C defaults all fields to zero. The initialization
of the rcu_state structure's ->n_force_qs and ->n_force_qs_ngp fields
is therefore redundant, so this commit removes these initializations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In order to allow each RCU flavor to concurrently execute its
rcu_barrier() function, it is necessary to move the relevant
state to the rcu_state structure. This commit therefore moves the
rcu_barrier_mutex global variable to a new ->barrier_mutex field
in the rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In order to allow each RCU flavor to concurrently execute its
rcu_barrier() function, it is necessary to move the relevant
state to the rcu_state structure. This commit therefore moves the
rcu_barrier_completion global variable to a new ->barrier_completion
field in the rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In order to allow each RCU flavor to concurrently execute its rcu_barrier()
function, it is necessary to move the relevant state to the rcu_state
structure. This commit therefore moves the rcu_barrier_cpu_count global
variable to a new ->barrier_cpu_count field in the rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In order for multiple flavors of RCU to each concurrently run one
rcu_barrier(), each flavor needs its own per-CPU set of rcu_head
structures. This commit therefore moves _rcu_barrier()'s set of
per-CPU rcu_head structures from per-CPU variables to the existing
per-CPU and per-RCU-flavor rcu_data structures.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This is a preparatory commit for increasing rcu_barrier()'s concurrency.
It adds a pointer in the rcu_data structure to the corresponding call_rcu()
function. This allows a pointer to the rcu_data structure to imply the
function pointer, which allows _rcu_barrier() state to be placed in the
rcu_state structure.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Upcoming rcu_barrier() concurrency commits will result in line lengths
greater than 80 characters in the RCU_STATE_INITIALIZER(), so this commit
shortens the name of the macro's argument to prevent this.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu_node tree array is sized based on compile-time constants,
including NR_CPUS. Although this approach has worked well in the past,
the recent trend by many distros to define NR_CPUS=4096 results in
excessive grace-period-initialization latencies.
This commit therefore substitutes the run-time computed nr_cpu_ids for
the compile-time NR_CPUS when building the tree. This can result in
much of the compile-time-allocated rcu_node array being unused. If
this is a major problem, you are in a specialized situation anyway,
so you can manually adjust the NR_CPUS, RCU_FANOUT, and RCU_FANOUT_LEAF
kernel config parameters.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although making RCU_FANOUT_LEAF a kernel configuration parameter rather
than a fixed constant makes it easier for people to decrease cache-miss
overhead for large systems, it is of little help for people who must
run a single pre-built kernel binary.
This commit therefore allows the value of RCU_FANOUT_LEAF to be
increased (but not decreased!) via a boot-time parameter named
rcutree.rcu_fanout_leaf.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This reverts commit 616c310e83.
(Move PREEMPT_RCU preemption to switch_to() invocation).
Testing by Sasha Levin <levinsasha928@gmail.com> showed that this
can result in deadlock due to invoking the scheduler when one of
the runqueue locks is held. Because this commit was simply a
performance optimization, revert it.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Commit b1420f1c (Make rcu_barrier() less disruptive) rearranged the
code in rcu_do_batch(), moving the ->qlen manipulation to follow
the requeueing of the callbacks. Unfortunately, this rearrangement
clobbered the value of the "count" local variable before the value
of rdp->qlen was adjusted, resulting in the value of rdp->qlen being
inaccurate. This commit therefore introduces an index variable "i",
avoiding the inadvertent multiplexing.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
In the present implementations of CPU hotplug, the outgoing CPU is
guaranteed to run its stop-machine process on the way out, which
will guarantee that RCU_FAST_NO_HZ forces the CPU out of dyntick-idle
mode.
However, new versions of CPU hotplug might not work this way. This
commit therefore removes this design constraint by explicitly notifying
CPUs when they adopt non-lazy RCU callbacks.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
Pull the v3.5 RCU tree from Paul E. McKenney:
1) A set of improvements and fixes to the RCU_FAST_NO_HZ feature
(with more on the way for 3.6). Posted to LKML:
https://lkml.org/lkml/2012/4/23/324 (commits 1-3 and 5),
https://lkml.org/lkml/2012/4/16/611 (commit 4),
https://lkml.org/lkml/2012/4/30/390 (commit 6), and
https://lkml.org/lkml/2012/5/4/410 (commit 7, combined with
the other commits for the convenience of the tester).
2) Changes to make rcu_barrier() avoid disrupting execution of CPUs
that have no RCU callbacks. Posted to LKML:
https://lkml.org/lkml/2012/4/23/322.
3) A couple of commits that improve the efficiency of the interaction
between preemptible RCU and the scheduler, these two being all
that survived an abortive attempt to allow preemptible RCU's
__rcu_read_lock() to be inlined. The full set was posted to
LKML at https://lkml.org/lkml/2012/4/14/143, and the first and
third patches of that set remain.
4) Lai Jiangshan's algorithmic implementation of SRCU, which includes
call_srcu() and srcu_barrier(). A major feature of this new
implementation is that synchronize_srcu() no longer disturbs
the execution of other CPUs. This work is based on earlier
implementations by Peter Zijlstra and Paul E. McKenney. Posted to
LKML: https://lkml.org/lkml/2012/2/22/82.
5) A number of miscellaneous bug fixes and improvements which were
posted to LKML at: https://lkml.org/lkml/2012/4/23/353 with
subsequent updates posted to LKML.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
barrier: Reduce the amount of disturbance by rcu_barrier() to the rest of
the system. This branch also includes improvements to
RCU_FAST_NO_HZ, which are included here due to conflicts.
fixes: Miscellaneous fixes.
inline: Remaining changes from an abortive attempt to inline
preemptible RCU's __rcu_read_lock(). These are (1) making
exit_rcu() avoid unnecessary work and (2) avoiding having
preemptible RCU record a blocked thread when the scheduler
declines to do a context switch.
srcu: Lai Jiangshan's algorithmic implementation of SRCU, including
call_srcu().
The rcu_barrier() primitive interrupts each and every CPU, registering
a callback on every CPU. Once all of these callbacks have been invoked,
rcu_barrier() knows that every callback that was registered before
the call to rcu_barrier() has also been invoked.
However, there is no point in registering a callback on a CPU that
currently has no callbacks, most especially if that CPU is in a
deep idle state. This commit therefore makes rcu_barrier() avoid
interrupting CPUs that have no callbacks. Doing this requires reworking
the handling of orphaned callbacks, otherwise callbacks could slip through
rcu_barrier()'s net by being orphaned from a CPU that rcu_barrier() had
not yet interrupted to a CPU that rcu_barrier() had already interrupted.
This reworking was needed anyway to take a first step towards weaning
RCU from the CPU_DYING notifier's use of stop_cpu().
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, PREEMPT_RCU readers are enqueued upon entry to the scheduler.
This is inefficient because enqueuing is required only if there is a
context switch, and entry to the scheduler does not guarantee a context
switch.
The commit therefore moves the enqueuing to immediately precede the
call to switch_to() from the scheduler.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Both Steven Rostedt's new idle-capable trace macros and the RCU_NONIDLE()
macro can cause RCU to momentarily pause out of idle without the rest
of the system being involved. This can cause rcu_prepare_for_idle()
to run through its state machine too quickly, which can in turn result
in needless scheduling-clock interrupts.
This commit therefore adds code to enable rcu_prepare_for_idle() to
distinguish between an initial entry to idle on the one hand (which needs
to advance the rcu_prepare_for_idle() state machine) and an idle reentry
due to idle-capable trace macros and RCU_NONIDLE() on the other hand
(which should avoid advancing the rcu_prepare_for_idle() state machine).
Additional state is maintained to allow the timer to be correctly reposted
when returning after a momentary pause out of idle, and even more state
is maintained to detect when new non-lazy callbacks have been enqueued
(which may require re-evaluation of the approach to idleness).
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_blocking_is_gp() function tests to see if there is only one
online CPU, and if so, synchronize_sched() and friends become no-ops.
However, for larger systems, num_online_cpus() scans a large vector,
and might be preempted while doing so. While preempted, any number
of CPUs might come online and go offline, potentially resulting in
num_online_cpus() returning 1 when there never had only been one
CPU online. This could result in a too-short RCU grace period, which
could in turn result in total failure, except that the only way that
the grace period is too short is if there is an RCU read-side critical
section spanning it. For RCU-sched and RCU-bh (which are the only
cases using rcu_blocking_is_gp()), RCU read-side critical sections
have either preemption or bh disabled, which prevents CPUs from going
offline. This in turn prevents actual failures from occurring.
This commit therefore adds a large block comment to rcu_blocking_is_gp()
documenting why it is safe. This commit also moves rcu_blocking_is_gp()
into kernel/rcutree.c, which should help prevent unwary developers from
mistaking it for a generally useful function.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit #0209f649 (rcu: limit rcu_node leaf-level fanout) set an upper
limit of 16 on the leaf-level fanout for the rcu_node tree. This was
needed to reduce lock contention that was induced by the synchronization
of scheduling-clock interrupts, which was in turn needed to improve
energy efficiency for moderate-sized lightly loaded servers.
However, reducing the leaf-level fanout means that there are more
leaf-level rcu_node structures in the tree, which in turn means that
RCU's grace-period initialization incurs more cache misses. This is
not a problem on moderate-sized servers with only a few tens of CPUs,
but becomes a major source of real-time latency spikes on systems with
many hundreds of CPUs. In addition, the workloads running on these large
systems tend to be CPU-bound, which eliminates the energy-efficiency
advantages of synchronizing scheduling-clock interrupts. Therefore,
these systems need maximal values for the rcu_node leaf-level fanout.
This commit addresses this problem by introducing a new kernel parameter
named RCU_FANOUT_LEAF that directly controls the leaf-level fanout.
This parameter defaults to 16 to handle the common case of a moderate
sized lightly loaded servers, but may be set higher on larger systems.
Reported-by: Mike Galbraith <efault@gmx.de>
Reported-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
As of:
29494be71a ("rcu,cleanup: simplify the code when cpu is dying")
RCU adopts callbacks from the dying CPU in its CPU_DYING notifier,
which means that any callbacks posted by later CPU_DYING notifiers
are ignored until the CPU comes back online.
A WARN_ON_ONCE() was added to __call_rcu() by:
e560140008 ("rcu: Simplify offline processing")
to check for this condition. Although this condition did not trigger
(at least as far as I know) during -next testing, it did recently
trigger in mainline:
https://lkml.org/lkml/2012/4/2/34
What is needed longer term is for RCU's CPU_DEAD notifier to adopt any
callbacks that were posted by CPU_DYING notifiers, however, the Linux
kernel has been running with this sort of thing happening for quite
some time. So the only thing that qualifies as a regression is the
WARN_ON_ONCE(), which this commit removes.
Making RCU's CPU_DEAD notifier adopt callbacks posted by CPU_DYING
notifiers is a topic for the 3.5 release of the Linux kernel.
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
synchronize_sched_expedited() is spamming CONFIG_DEBUG_PREEMPT=y
users with an unintended warning from the cpu_is_offline() check: use
raw_smp_processor_id() instead of smp_processor_id() there.
Because the warning is under a get_online_cpus(), it is not possible
for any CPUs to go offline, though it is quite possible that the
task might migrate between the raw_smp_processor_id() and the check
of cpu_is_offline(). This is not a problem because the task cannot
migrate from an offline CPU to an online one or vice versa. The point
of the check is to verify that synchronize_sched_expedited() is not
called from an offline CPU, for example, from a CPU_DYING notifier, or,
more important, from an outgoing CPU making its way from its CPU_DYING
notifiers to the idle loop.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Li Zhong