Commit Graph

206 Commits

Author SHA1 Message Date
Tom Herbert 359a0ea987 vxlan: Add support for UDP checksums (v4 sending, v6 zero csums)
Added VXLAN link configuration for sending UDP checksums, and allowing
TX and RX of UDP6 checksums.

Also, call common iptunnel_handle_offloads and added GSO support for
checksums.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-04 22:46:39 -07:00
Pravin B Shelar 0c200ef94c openvswitch: Simplify genetlink code.
Following patch get rid of struct genl_family_and_ops which is
redundant due to changes to struct genl_family.

Signed-off-by: Kyle Mestery <mestery@noironetworks.com>
Acked-by: Kyle Mestery <mestery@noironetworks.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:37 -07:00
Jarno Rajahalme 893f139b9a openvswitch: Minimize ovs_flow_cmd_new|set critical sections.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:36 -07:00
Jarno Rajahalme 37bdc87ba0 openvswitch: Split ovs_flow_cmd_new_or_set().
Following patch will be easier to reason about with separate
ovs_flow_cmd_new() and ovs_flow_cmd_set() functions.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:36 -07:00
Jarno Rajahalme aed067783e openvswitch: Minimize ovs_flow_cmd_del critical section.
ovs_flow_cmd_del() now allocates reply (if needed) after the flow has
already been removed from the flow table.  If the reply allocation
fails, a netlink error is signaled with netlink_set_err(), as is
already done in ovs_flow_cmd_new_or_set() in the similar situation.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:36 -07:00
Jarno Rajahalme 0e9796b4af openvswitch: Reduce locking requirements.
Reduce and clarify locking requirements for ovs_flow_cmd_alloc_info(),
ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info().

A datapath pointer is available only when holding a lock.  Change
ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info() to take a
dp_ifindex directly, rather than a datapath pointer that is then
(only) used to get the dp_ifindex.  This is useful, since the
dp_ifindex is available even when the datapath pointer is not, both
before and after taking a lock, which makes further critical section
reduction possible.

Make ovs_flow_cmd_alloc_info() take an 'acts' argument instead a
'flow' pointer.  This allows some future patches to do the allocation
before acquiring the flow pointer.

The locking requirements after this patch are:

ovs_flow_cmd_alloc_info(): May be called without locking, must not be
called while holding the RCU read lock (due to memory allocation).
If 'acts' belong to a flow in the flow table, however, then the
caller must hold ovs_mutex.

ovs_flow_cmd_fill_info(): Either ovs_mutex or RCU read lock must be held.

ovs_flow_cmd_build_info(): This calls both of the above, so the caller
must hold ovs_mutex.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:36 -07:00
Jarno Rajahalme 86ec8dbae2 openvswitch: Fix ovs_flow_stats_get/clear RCU dereference.
For ovs_flow_stats_get() using ovsl_dereference() was wrong, since
flow dumps call this with RCU read lock.

ovs_flow_stats_clear() is always called with ovs_mutex, so can use
ovsl_dereference().

Also, make the ovs_flow_stats_get() 'flow' argument const to make
later patches cleaner.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:35 -07:00
Jarno Rajahalme eb07265904 openvswitch: Fix typo.
Incorrect struct name was confusing, even though otherwise
inconsequental.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:35 -07:00
Jarno Rajahalme 6093ae9aba openvswitch: Minimize dp and vport critical sections.
Move most memory allocations away from the ovs_mutex critical
sections.  vport allocations still happen while the lock is taken, as
changing that would require major refactoring. Also, vports are
created very rarely so it should not matter.

Change ovs_dp_cmd_get() now only takes the rcu_read_lock(), rather
than ovs_lock(), as nothing need to be changed.  This was done by
ovs_vport_cmd_get() already.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:35 -07:00
Jarno Rajahalme 56c19868e1 openvswitch: Make flow mask removal symmetric.
Masks are inserted when flows are inserted to the table, so it is
logical to correspondingly remove masks when flows are removed from
the table, in ovs_flow_table_remove().

This allows ovs_flow_free() to be called without locking, which will
be used by later patches.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:35 -07:00
Jarno Rajahalme fb5d1e9e12 openvswitch: Build flow cmd netlink reply only if needed.
Use netlink_has_listeners() and NLM_F_ECHO flag to determine if a
reply is needed or not for OVS_FLOW_CMD_NEW, OVS_FLOW_CMD_SET, or
OVS_FLOW_CMD_DEL.  Currently, OVS userspace does not request a reply
for OVS_FLOW_CMD_NEW, but usually does for OVS_FLOW_CMD_DEL, as stats
may have changed.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:34 -07:00
Jarno Rajahalme bb6f9a708d openvswitch: Clarify locking.
Remove unnecessary locking from functions that are always called with
appropriate locking.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:34 -07:00
Jarno Rajahalme be52c9e96a openvswitch: Avoid assigning a NULL pointer to flow actions.
Flow SET can accept an empty set of actions, with the intended
semantics of leaving existing actions unmodified.  This seems to have
been brokin after OVS 1.7, as we have assigned the flow's actions
pointer to NULL in this case, but we never check for the NULL pointer
later on.  This patch restores the intended behavior and documents it
in the include/linux/openvswitch.h.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:34 -07:00
Jarno Rajahalme 1139e241ec openvswitch: Compact sw_flow_key.
Minimize padding in sw_flow_key and move 'tp' top the main struct.
These changes simplify code when accessing the transport port numbers
and the tcp flags, and makes the sw_flow_key 8 bytes smaller on 64-bit
systems (128->120 bytes).  These changes also make the keys for IPv4
packets to fit in one cache line.

There is a valid concern for safety of packing the struct
ovs_key_ipv4_tunnel, as it would be possible to take the address of
the tun_id member as a __be64 * which could result in unaligned access
in some systems. However:

- sw_flow_key itself is 64-bit aligned, so the tun_id within is
  always
  64-bit aligned.
- We never make arrays of ovs_key_ipv4_tunnel (which would force
  every
  second tun_key to be misaligned).
- We never take the address of the tun_id in to a __be64 *.
- Whereever we use struct ovs_key_ipv4_tunnel outside the
  sw_flow_key,
  it is in stack (on tunnel input functions), where compiler has full
  control of the alignment.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-05-22 16:27:34 -07:00
Monam Agarwal 944df8ae84 net/openvswitch: Use with RCU_INIT_POINTER(x, NULL) in vport-gre.c
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:29 -07:00
Jarno Rajahalme 88d73f6c41 openvswitch: Use TCP flags in the flow key for stats.
We already extract the TCP flags for the key, might as well use that
for stats.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:29 -07:00
Jarno Rajahalme d92ab13558 openvswitch: Fix output of SCTP mask.
The 'output' argument of the ovs_nla_put_flow() is the one from which
the bits are written to the netlink attributes.  For SCTP we
accidentally used the bits from the 'swkey' instead.  This caused the
mask attributes to include the bits from the actual flow key instead
of the mask.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:29 -07:00
Jarno Rajahalme 63e7959c4b openvswitch: Per NUMA node flow stats.
Keep kernel flow stats for each NUMA node rather than each (logical)
CPU.  This avoids using the per-CPU allocator and removes most of the
kernel-side OVS locking overhead otherwise on the top of perf reports
and allows OVS to scale better with higher number of threads.

With 9 handlers and 4 revalidators netperf TCP_CRR test flow setup
rate doubles on a server with two hyper-threaded physical CPUs (16
logical cores each) compared to the current OVS master.  Tested with
non-trivial flow table with a TCP port match rule forcing all new
connections with unique port numbers to OVS userspace.  The IP
addresses are still wildcarded, so the kernel flows are not considered
as exact match 5-tuple flows.  This type of flows can be expected to
appear in large numbers as the result of more effective wildcarding
made possible by improvements in OVS userspace flow classifier.

Perf results for this test (master):

Events: 305K cycles
+   8.43%     ovs-vswitchd  [kernel.kallsyms]   [k] mutex_spin_on_owner
+   5.64%     ovs-vswitchd  [kernel.kallsyms]   [k] __ticket_spin_lock
+   4.75%     ovs-vswitchd  ovs-vswitchd        [.] find_match_wc
+   3.32%     ovs-vswitchd  libpthread-2.15.so  [.] pthread_mutex_lock
+   2.61%     ovs-vswitchd  [kernel.kallsyms]   [k] pcpu_alloc_area
+   2.19%     ovs-vswitchd  ovs-vswitchd        [.] flow_hash_in_minimask_range
+   2.03%          swapper  [kernel.kallsyms]   [k] intel_idle
+   1.84%     ovs-vswitchd  libpthread-2.15.so  [.] pthread_mutex_unlock
+   1.64%     ovs-vswitchd  ovs-vswitchd        [.] classifier_lookup
+   1.58%     ovs-vswitchd  libc-2.15.so        [.] 0x7f4e6
+   1.07%     ovs-vswitchd  [kernel.kallsyms]   [k] memset
+   1.03%          netperf  [kernel.kallsyms]   [k] __ticket_spin_lock
+   0.92%          swapper  [kernel.kallsyms]   [k] __ticket_spin_lock
...

And after this patch:

Events: 356K cycles
+   6.85%     ovs-vswitchd  ovs-vswitchd        [.] find_match_wc
+   4.63%     ovs-vswitchd  libpthread-2.15.so  [.] pthread_mutex_lock
+   3.06%     ovs-vswitchd  [kernel.kallsyms]   [k] __ticket_spin_lock
+   2.81%     ovs-vswitchd  ovs-vswitchd        [.] flow_hash_in_minimask_range
+   2.51%     ovs-vswitchd  libpthread-2.15.so  [.] pthread_mutex_unlock
+   2.27%     ovs-vswitchd  ovs-vswitchd        [.] classifier_lookup
+   1.84%     ovs-vswitchd  libc-2.15.so        [.] 0x15d30f
+   1.74%     ovs-vswitchd  [kernel.kallsyms]   [k] mutex_spin_on_owner
+   1.47%          swapper  [kernel.kallsyms]   [k] intel_idle
+   1.34%     ovs-vswitchd  ovs-vswitchd        [.] flow_hash_in_minimask
+   1.33%     ovs-vswitchd  ovs-vswitchd        [.] rule_actions_unref
+   1.16%     ovs-vswitchd  ovs-vswitchd        [.] hindex_node_with_hash
+   1.16%     ovs-vswitchd  ovs-vswitchd        [.] do_xlate_actions
+   1.09%     ovs-vswitchd  ovs-vswitchd        [.] ofproto_rule_ref
+   1.01%          netperf  [kernel.kallsyms]   [k] __ticket_spin_lock
...

There is a small increase in kernel spinlock overhead due to the same
spinlock being shared between multiple cores of the same physical CPU,
but that is barely visible in the netperf TCP_CRR test performance
(maybe ~1% performance drop, hard to tell exactly due to variance in
the test results), when testing for kernel module throughput (with no
userspace activity, handful of kernel flows).

On flow setup, a single stats instance is allocated (for the NUMA node
0).  As CPUs from multiple NUMA nodes start updating stats, new
NUMA-node specific stats instances are allocated.  This allocation on
the packet processing code path is made to never block or look for
emergency memory pools, minimizing the allocation latency.  If the
allocation fails, the existing preallocated stats instance is used.
Also, if only CPUs from one NUMA-node are updating the preallocated
stats instance, no additional stats instances are allocated.  This
eliminates the need to pre-allocate stats instances that will not be
used, also relieving the stats reader from the burden of reading stats
that are never used.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:29 -07:00
Jarno Rajahalme 23dabf88ab openvswitch: Remove 5-tuple optimization.
The 5-tuple optimization becomes unnecessary with a later per-NUMA
node stats patch.  Remove it first to make the changes easier to
grasp.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:29 -07:00
Joe Perches 8c63ff09bd openvswitch: Use ether_addr_copy
It's slightly smaller/faster for some architectures.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:29 -07:00
Joe Perches 2235ad1c3a openvswitch: flow_netlink: Use pr_fmt to OVS_NLERR output
Add "openvswitch: " prefix to OVS_NLERR output
to match the other OVS_NLERR output of datapath.c

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:28 -07:00
Joe Perches 1815a8831f openvswitch: Use net_ratelimit in OVS_NLERR
Each use of pr_<level>_once has a per-site flag.

Some of the OVS_NLERR messages look as if seeing them
multiple times could be useful, so use net_ratelimit()
instead of pr_info_once.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:28 -07:00
Daniele Di Proietto cc23ebf3bb openvswitch: Added (unsigned long long) cast in printf
This is necessary, since u64 is not unsigned long long
in all architectures: u64 could be also uint64_t.

Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:28 -07:00
Daniele Di Proietto 07dc0602c5 openvswitch: avoid cast-qual warning in vport_priv
This function must cast a const value to a non const value.
By adding an uintptr_t cast the warning is suppressed.
To avoid the cast (proper solution) several function signatures
must be changed.

Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:28 -07:00
Daniele Di Proietto d0b4da1375 openvswitch: avoid warnings in vport_from_priv
This change, firstly, avoids declaring the formal parameter const,
since it is treated as non const. (to avoid -Wcast-qual)
Secondly, it cast the pointer from void* to u8*, since it is used
in arithmetic (to avoid -Wpointer-arith)

Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:28 -07:00
Daniele Di Proietto 7085130bab openvswitch: use const in some local vars and casts
In few functions, const formal parameters are assigned or cast to
non-const.
These changes suppress warnings if compiled with -Wcast-qual.

Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-05-16 13:40:28 -07:00
Wilfried Klaebe 7ad24ea4bf net: get rid of SET_ETHTOOL_OPS
net: get rid of SET_ETHTOOL_OPS

Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone.
This does that.

Mostly done via coccinelle script:
@@
struct ethtool_ops *ops;
struct net_device *dev;
@@
-       SET_ETHTOOL_OPS(dev, ops);
+       dev->ethtool_ops = ops;

Compile tested only, but I'd seriously wonder if this broke anything.

Suggested-by: Dave Miller <davem@davemloft.net>
Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13 17:43:20 -04:00
WANG Cong 60ff746739 net: rename local_df to ignore_df
As suggested by several people, rename local_df to ignore_df,
since it means "ignore df bit if it is set".

Cc: Maciej Żenczykowski <maze@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12 14:03:41 -04:00
Nicolas Dichtel f01ec1c017 vxlan: add x-netns support
This patch allows to switch the netns when packet is encapsulated or
decapsulated.
The vxlan socket is openned into the i/o netns, ie into the netns where
encapsulated packets are received. The socket lookup is done into this netns to
find the corresponding vxlan tunnel. After decapsulation, the packet is
injecting into the corresponding interface which may stand to another netns.

When one of the two netns is removed, the tunnel is destroyed.

Configuration example:
ip netns add netns1
ip netns exec netns1 ip link set lo up
ip link add vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0
ip link set vxlan10 netns netns1
ip netns exec netns1 ip addr add 192.168.0.249/24 broadcast 192.168.0.255 dev vxlan10
ip netns exec netns1 ip link set vxlan10 up

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24 16:18:26 -04:00
Eric Dumazet aad88724c9 ipv4: add a sock pointer to dst->output() path.
In the dst->output() path for ipv4, the code assumes the skb it has to
transmit is attached to an inet socket, specifically via
ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the
provider of the packet is an AF_PACKET socket.

The dst->output() method gets an additional 'struct sock *sk'
parameter. This needs a cascade of changes so that this parameter can
be propagated from vxlan to final consumer.

Fixes: 8f646c922d ("vxlan: keep original skb ownership")
Reported-by: lucien xin <lucien.xin@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15 13:47:15 -04:00
David S. Miller 64c27237a0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/marvell/mvneta.c

The mvneta.c conflict is a case of overlapping changes,
a conversion to devm_ioremap_resource() vs. a conversion
to netdev_alloc_pcpu_stats.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29 18:48:54 -04:00
Flavio Leitner 4f647e0a3c openvswitch: fix a possible deadlock and lockdep warning
There are two problematic situations.

A deadlock can happen when is_percpu is false because it can get
interrupted while holding the spinlock. Then it executes
ovs_flow_stats_update() in softirq context which tries to get
the same lock.

The second sitation is that when is_percpu is true, the code
correctly disables BH but only for the local CPU, so the
following can happen when locking the remote CPU without
disabling BH:

       CPU#0                            CPU#1
  ovs_flow_stats_get()
   stats_read()
 +->spin_lock remote CPU#1        ovs_flow_stats_get()
 |  <interrupted>                  stats_read()
 |  ...                       +-->  spin_lock remote CPU#0
 |                            |     <interrupted>
 |  ovs_flow_stats_update()   |     ...
 |   spin_lock local CPU#0 <--+     ovs_flow_stats_update()
 +---------------------------------- spin_lock local CPU#1

This patch disables BH for both cases fixing the deadlocks.
Acked-by: Jesse Gross <jesse@nicira.com>

=================================
[ INFO: inconsistent lock state ]
3.14.0-rc8-00007-g632b06a #1 Tainted: G          I
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/0/0 [HC0[0]:SC1[5]:HE1:SE0] takes:
(&(&cpu_stats->lock)->rlock){+.?...}, at: [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch]
{SOFTIRQ-ON-W} state was registered at:
[<ffffffff810f973f>] __lock_acquire+0x68f/0x1c40
[<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0
[<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80
[<ffffffffa05dd9e4>] ovs_flow_stats_get+0xc4/0x1e0 [openvswitch]
[<ffffffffa05da855>] ovs_flow_cmd_fill_info+0x185/0x360 [openvswitch]
[<ffffffffa05daf05>] ovs_flow_cmd_build_info.constprop.27+0x55/0x90 [openvswitch]
[<ffffffffa05db41d>] ovs_flow_cmd_new_or_set+0x4dd/0x570 [openvswitch]
[<ffffffff816c245d>] genl_family_rcv_msg+0x1cd/0x3f0
[<ffffffff816c270e>] genl_rcv_msg+0x8e/0xd0
[<ffffffff816c0239>] netlink_rcv_skb+0xa9/0xc0
[<ffffffff816c0798>] genl_rcv+0x28/0x40
[<ffffffff816bf830>] netlink_unicast+0x100/0x1e0
[<ffffffff816bfc57>] netlink_sendmsg+0x347/0x770
[<ffffffff81668e9c>] sock_sendmsg+0x9c/0xe0
[<ffffffff816692d9>] ___sys_sendmsg+0x3a9/0x3c0
[<ffffffff8166a911>] __sys_sendmsg+0x51/0x90
[<ffffffff8166a962>] SyS_sendmsg+0x12/0x20
[<ffffffff817e3ce9>] system_call_fastpath+0x16/0x1b
irq event stamp: 1740726
hardirqs last  enabled at (1740726): [<ffffffff8175d5e0>] ip6_finish_output2+0x4f0/0x840
hardirqs last disabled at (1740725): [<ffffffff8175d59b>] ip6_finish_output2+0x4ab/0x840
softirqs last  enabled at (1740674): [<ffffffff8109be12>] _local_bh_enable+0x22/0x50
softirqs last disabled at (1740675): [<ffffffff8109db05>] irq_exit+0xc5/0xd0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&cpu_stats->lock)->rlock);
  <Interrupt>
    lock(&(&cpu_stats->lock)->rlock);

 *** DEADLOCK ***

5 locks held by swapper/0/0:
 #0:  (((&ifa->dad_timer))){+.-...}, at: [<ffffffff810a7155>] call_timer_fn+0x5/0x320
 #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff81788a55>] mld_sendpack+0x5/0x4a0
 #2:  (rcu_read_lock_bh){.+....}, at: [<ffffffff8175d149>] ip6_finish_output2+0x59/0x840
 #3:  (rcu_read_lock_bh){.+....}, at: [<ffffffff8168ba75>] __dev_queue_xmit+0x5/0x9b0
 #4:  (rcu_read_lock){.+.+..}, at: [<ffffffffa05e41b5>] internal_dev_xmit+0x5/0x110 [openvswitch]

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G          I  3.14.0-rc8-00007-g632b06a #1
Hardware name:                  /DX58SO, BIOS SOX5810J.86A.5599.2012.0529.2218 05/29/2012
 0000000000000000 0fcf20709903df0c ffff88042d603808 ffffffff817cfe3c
 ffffffff81c134c0 ffff88042d603858 ffffffff817cb6da 0000000000000005
 ffffffff00000001 ffff880400000000 0000000000000006 ffffffff81c134c0
Call Trace:
 <IRQ>  [<ffffffff817cfe3c>] dump_stack+0x4d/0x66
 [<ffffffff817cb6da>] print_usage_bug+0x1f4/0x205
 [<ffffffff810f7f10>] ? check_usage_backwards+0x180/0x180
 [<ffffffff810f8963>] mark_lock+0x223/0x2b0
 [<ffffffff810f96d3>] __lock_acquire+0x623/0x1c40
 [<ffffffff810f5707>] ? __lock_is_held+0x57/0x80
 [<ffffffffa05e26c6>] ? masked_flow_lookup+0x236/0x250 [openvswitch]
 [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0
 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch]
 [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80
 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch]
 [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch]
 [<ffffffffa05dcc64>] ovs_dp_process_received_packet+0x84/0x120 [openvswitch]
 [<ffffffff810f93f7>] ? __lock_acquire+0x347/0x1c40
 [<ffffffffa05e3bea>] ovs_vport_receive+0x2a/0x30 [openvswitch]
 [<ffffffffa05e4218>] internal_dev_xmit+0x68/0x110 [openvswitch]
 [<ffffffffa05e41b5>] ? internal_dev_xmit+0x5/0x110 [openvswitch]
 [<ffffffff8168b4a6>] dev_hard_start_xmit+0x2e6/0x8b0
 [<ffffffff8168be87>] __dev_queue_xmit+0x417/0x9b0
 [<ffffffff8168ba75>] ? __dev_queue_xmit+0x5/0x9b0
 [<ffffffff8175d5e0>] ? ip6_finish_output2+0x4f0/0x840
 [<ffffffff8168c430>] dev_queue_xmit+0x10/0x20
 [<ffffffff8175d641>] ip6_finish_output2+0x551/0x840
 [<ffffffff8176128a>] ? ip6_finish_output+0x9a/0x220
 [<ffffffff8176128a>] ip6_finish_output+0x9a/0x220
 [<ffffffff8176145f>] ip6_output+0x4f/0x1f0
 [<ffffffff81788c29>] mld_sendpack+0x1d9/0x4a0
 [<ffffffff817895b8>] mld_send_initial_cr.part.32+0x88/0xa0
 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
 [<ffffffff8178e301>] ipv6_mc_dad_complete+0x31/0x50
 [<ffffffff817690d7>] addrconf_dad_completed+0x147/0x220
 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
 [<ffffffff8176934f>] addrconf_dad_timer+0x19f/0x1c0
 [<ffffffff810a71e9>] call_timer_fn+0x99/0x320
 [<ffffffff810a7155>] ? call_timer_fn+0x5/0x320
 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220
 [<ffffffff810a76c4>] run_timer_softirq+0x254/0x3b0
 [<ffffffff8109d47d>] __do_softirq+0x12d/0x480

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 16:41:53 -04:00
Zoltan Kiss 36d5fe6a00 core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors
skb_zerocopy can copy elements of the frags array between skbs, but it doesn't
orphan them. Also, it doesn't handle errors, so this patch takes care of that
as well, and modify the callers accordingly. skb_tx_error() is also added to
the callers so they will signal the failed delivery towards the creator of the
skb.

Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27 15:29:38 -04:00
David S. Miller 04f58c8854 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	Documentation/devicetree/bindings/net/micrel-ks8851.txt
	net/core/netpoll.c

The net/core/netpoll.c conflict is a bug fix in 'net' happening
to code which is completely removed in 'net-next'.

In micrel-ks8851.txt we simply have overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25 20:29:20 -04:00
Ben Pfaff f9b8c4c8ba openvswitch: Correctly report flow used times for first 5 minutes after boot.
The kernel starts out its "jiffies" timer as 5 minutes below zero, as
shown in include/linux/jiffies.h:

  /*
   * Have the 32 bit jiffies value wrap 5 minutes after boot
   * so jiffies wrap bugs show up earlier.
   */
  #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))

The loop in ovs_flow_stats_get() starts out with 'used' set to 0, then
takes any "later" time.  This means that for the first five minutes after
boot, flows will always be reported as never used, since 0 is greater than
any time already seen.

Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-03-20 10:45:21 -07:00
Eric W. Biederman 57a7744e09 net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irq
Replace the bh safe variant with the hard irq safe variant.

We need a hard irq safe variant to deal with netpoll transmitting
packets from hard irq context, and we need it in most if not all of
the places using the bh safe variant.

Except on 32bit uni-processor the code is exactly the same so don't
bother with a bh variant, just have a hard irq safe variant that
everyone can use.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14 22:41:36 -04:00
Jarno Rajahalme 42ee19e293 openvswitch: Fix race.
ovs_vport_cmd_dump() did rcu_read_lock() only after getting the
datapath, which could have been deleted in between.  Resolved by
taking rcu_read_lock() before the get_dp() call.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-02-15 17:42:29 -08:00
Jarno Rajahalme 04382a3303 openvswitch: Read tcp flags only then the tranport header is present.
Only the first IP fragment can have a TCP header, check for this.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-15 17:37:45 -08:00
Jiri Pirko 3c7eacfc8a ovs: fix dp check in ovs_dp_reset_user_features
This fixes crash when userspace does "ovs-dpctl add-dp dev" where dev is
existing non-dp netdevice.

Introduced by:
commit 44da5ae5fb
"openvswitch: Drop user features if old user space attempted to create datapath"

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-15 17:24:19 -08:00
WANG Cong df9d9fdf8f openvswitch: rename ->sync to ->syncp
Openvswitch defines u64_stats_sync as ->sync rather than ->syncp,
so fails to compile with netdev_alloc_pcpu_stats(). So just rename it to ->syncp.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 1c213bd24a (net: introduce netdev_alloc_pcpu_stats() for drivers)
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-15 02:06:23 -05:00
WANG Cong 1c213bd24a net: introduce netdev_alloc_pcpu_stats() for drivers
There are many drivers calling alloc_percpu() to allocate pcpu stats
and then initializing ->syncp. So just introduce a helper function for them.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14 15:49:55 -05:00
Andy Zhou c14e0953ca openvswitch: Suppress error messages on megaflow updates
With subfacets, we'd expect megaflow updates message to carry
the original micro flow. If not, EINVAL is returned and kernel
logs an error message.  Now that the user space subfacet layer is
removed, it is expected that flow updates can arrive with a
micro flow other than the original. Change the return code to
EEXIST and remove the kernel error log message.

Reported-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-04 22:32:38 -08:00
Pravin B Shelar e4c6d75954 openvswitch: Fix ovs_flow_free() ovs-lock assert.
ovs_flow_free() is not called under ovs-lock during packet
execute path (ovs_packet_cmd_execute()). Since packet execute
does not touch flow->mask, there is no need to take that
lock either. So move assert in case where flow->mask is checked.

Found by code inspection.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-04 22:21:45 -08:00
Daniele Di Proietto 45fb9c35b2 openvswitch: Fix ovs_dp_cmd_msg_size()
commit 43d4be9cb5 (openvswitch: Allow user space
to announce ability to accept unaligned Netlink messages) introduced
OVS_DP_ATTR_USER_FEATURES netlink attribute in datapath responses,
but the attribute size was not taken into account in ovs_dp_cmd_msg_size().

Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-04 22:21:23 -08:00
Andy Zhou e80857cce8 openvswitch: Fix kernel panic on ovs_flow_free
Both mega flow mask's reference counter and per flow table mask list
should only be accessed when holding ovs_mutex() lock. However
this is not true with ovs_flow_table_flush(). The patch fixes this bug.

Reported-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-04 22:21:17 -08:00
Thomas Graf aea0bb4f8e openvswitch: Pad OVS_PACKET_ATTR_PACKET if linear copy was performed
While the zerocopy method is correctly omitted if user space
does not support unaligned Netlink messages. The attribute is
still not padded correctly as skb_zerocopy() will not ensure
padding and the attribute size is no longer pre calculated
though nla_reserve() which ensured padding previously.

This patch applies appropriate padding if a linear data copy
was performed in skb_zerocopy().

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-04 22:21:11 -08:00
Aruna-Hewapathirane 63862b5bef net: replace macros net_random and net_srandom with direct calls to prandom
This patch removes the net_random and net_srandom macros and replaces
them with direct calls to the prandom ones. As new commits only seem to
use prandom_u32 there is no use to keep them around.
This change makes it easier to grep for users of prandom_u32.

Signed-off-by: Aruna-Hewapathirane <aruna.hewapathirane@gmail.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14 15:15:25 -08:00
Wei Yongjun ece37c87ab openvswitch: Use kmem_cache_free() instead of kfree()
memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().

Fixes: e298e50570 ('openvswitch: Per cpu flow stats.')
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09 14:26:39 -05:00
David S. Miller 39b6b2992f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
Jesse Gross says:

====================
[GIT net-next] Open vSwitch

Open vSwitch changes for net-next/3.14. Highlights are:
 * Performance improvements in the mechanism to get packets to userspace
   using memory mapped netlink and skb zero copy where appropriate.
 * Per-cpu flow stats in situations where flows are likely to be shared
   across CPUs. Standard flow stats are used in other situations to save
   memory and allocation time.
 * A handful of code cleanups and rationalization.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 19:48:38 -05:00
Stephen Hemminger 443cd88c8a ovs: make functions local
Several functions and datastructures could be local
Found with 'make namespacecheck'

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06 15:54:39 -08:00