No check for if "rc" is an error code for build_sec_desc().
This can cause problems with using uninitialized pntsd_size.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org # v5.15
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is a failure path and it should return -EINVAL instead of success.
Otherwise it could result in the caller using uninitialized memory.
Fixes: 303fff2b8c ("ksmbd: add validation for ndr read/write functions")
Cc: stable@vger.kernel.org # v5.15
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The low-level mapping helpers were so far crammed into fs.h. They are
out of place there. The fs.h header should just contain the higher-level
mapping helpers that interact directly with vfs objects such as struct
super_block or struct inode and not the bare mapping helpers. Similarly,
only vfs and specific fs code shall interact with low-level mapping
helpers. And so they won't be made accessible automatically through
regular {g,u}id helpers.
Link: https://lore.kernel.org/r/20211123114227.3124056-3-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-3-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-3-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
If xattr is not supported like exfat or fat, ksmbd server doesn't
contain default data stream in FILE_STREAM_INFORMATION response. It will
cause ppt or doc file update issue if local filesystem is such as ones.
This patch move goto statement to contain it.
Fixes: 9f6323311c ("ksmbd: add default data stream name in FILE_STREAM_INFORMATION")
Cc: stable@vger.kernel.org # v5.15
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
While file transfer through windows client, This error flood message
happen. This flood message will cause performance degradation and
misunderstand server has problem.
Fixes: e294f78d34 ("ksmbd: allow PROTECTED_DACL_SECINFO and UNPROTECTED_DACL_SECINFO addition information in smb2 set info security")
Cc: stable@vger.kernel.org # v5.15
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
All the error handling paths of 'smb2_sess_setup()' end to 'out_err'.
All but the new error handling path added by the commit given in the Fixes
tag below.
Fix this error handling path and branch to 'out_err' as well.
Fixes: 0d994cd482 ("ksmbd: add buffer validation in session setup")
Cc: stable@vger.kernel.org # v5.15
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move SMB2_SessionSetup, SMB2_Close, SMB2_Read, SMB2_Write and
SMB2_ChangeNotify commands into smbfs_common/smb2pdu.h
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs define LeaseKey as u8 array in structure. To move lease structure
to smbfs_common, ksmbd change LeaseKey data type to u8 array.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
To move smb2_transform_hdr to smbfs_common, This patch remove
smb2_buf_length variable in smb2_transform_hdr.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
To move smb2_hdr to smbfs_common, This patch remove smb2_buf_length
variable in smb2_hdr. Also, declare smb2_get_msg function to get smb2
request/response from ->request/response_buf.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
As NTLM authentication is removed, md4 is no longer used.
ksmbd remove md4 leftovers, i.e. select CRYPTO_MD4, MODULE_SOFTDEP md4.
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French reported ksmbd set fixed value to volume serial field in
FS_VOLUME_INFORMATION. Volume serial value needs to be set to a unique
value for client fscache. This patch set crc value that is generated
with share name, path name and netbios name to volume serial.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org # v5.15
Reported-by: Steve French <smfrench@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When validating request length in ksmbd_check_message, 8byte alignment
is not needed for compound request. It can cause wrong validation
of request length.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org # v5.15
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The validate_negotiate_info_req struct definition includes an extra
field to access the data coming after the header. This causes the check
in fsctl_validate_negotiate_info() to count the first element of the
array twice. This in turn makes some valid requests fail, depending on
whether they include padding or not.
Fixes: f7db8fd03a ("ksmbd: add validation in smb2_ioctl")
Cc: stable@vger.kernel.org # v5.15
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Steve French <stfrench@microsoft.com>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use cmd helper variable in smb2_get_ksmbd_tcon().
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Steve French <smfrench@gmail.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use ksmbd_req_buf_next() in ksmbd_smb2_check_message().
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Steve French <smfrench@gmail.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use ksmbd_req_buf_next() in ksmbd_verify_smb_message().
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make sure the security buffer's length/offset are valid with regards to
the packet length.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Steve French <stfrench@microsoft.com>
To avoid dictionary attacks (repeated session setups rapidly sent) to
connect to server, ksmbd make a delay of a 5 seconds on session setup
failure to make it harder to send enough random connection requests
to break into a server if a user insert the wrong password 10 times
in a row.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests and
check the free size of response buffer for these requests.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_validate_credit_charge() accesses fields in the SMB2 PDU body,
but until smb2_calc_size() is called the PDU has not yet been verified
to be large enough to access the PDU dynamic part length field.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add buffer validation for smb direct.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd limit read/write/trans buffer size not to exceed maximum 8MB.
And set the minimum value of max response buffer size to 64KB.
Windows client doesn't send session setup request if ksmbd set max
trans/read/write size lower than 64KB in smb2 negotiate.
It means windows allow at least 64 KB or more about this value.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add the check to validate compound response buffer.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
DataOffset and Length validation can be potencial 32bit overflow.
This patch fix it.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
* Requests except READ, WRITE, IOCTL, INFO, QUERY
DIRECOTRY, CANCEL must consume one credit.
* If client's granted credits are insufficient,
refuse to handle requests.
* Windows server 2016 or later grant up to 8192
credits to clients at once.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add validation for request/response buffer size check in smb2_ioctl and
fsctl_copychunk() take copychunk_ioctl_req pointer and the other arguments
instead of smb2_ioctl_req structure and remove an unused smb2_ioctl_req
argument of fsctl_validate_negotiate_info.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Marios reported kernel oops from fuse driver when ksmbd call
mark_inode_dirty(). This patch directly update ->i_ctime after removing
mark_inode_ditry() and notify_change will put inode to dirty list.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Reported-by: Marios Makassikis <mmakassikis@freebox.fr>
Tested-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix version mismatch with out of tree, This updated version will be
matched with ksmbd-tools.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Tom suggested to use buf_data_size that is already calculated, to verify
these offsets.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Suggested-by: Tom Talpey <tom@talpey.com>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although ksmbd doesn't send SMB2.0 support in supported dialect list of smb
negotiate response, There is the leftover of smb2.0 dialect.
This patch remove it not to support SMB2.0 in ksmbd.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When invalid data offset and data length in request,
ksmbd_smb2_check_message check strictly and doesn't allow to process such
requests.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch add MAX_STREAM_PROT_LEN macro and check if stream protocol
length exceeds maximum value. opencode pdu size check in
ksmbd_pdu_size_has_room().
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The kmalloc() does not have a NULL check. This code can be re-written
slightly cleaner to just use the kstrdup().
Fixes: 265fd1991c ("ksmbd: use LOOKUP_BENEATH to prevent the out of share access")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Validate that the transform and smb request headers are present
before checking OriginalMessageSize and SessionId fields.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add buffer validation for SMB2_CREATE_CONTEXT.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch add validation to check request buffer check in smb2
negotiate and fix null pointer deferencing oops in smb3_preauth_hash_rsp()
that found from manual test.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add buffer validation in smb2_set_info, and remove unused variable
in set_file_basic_info. and smb2_set_info infolevel functions take
structure pointer argument.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use correct basic info level in set/get_file_basic_info().
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove insecure NTLMv1 authentication.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Acked-by: Steve French <smfrench@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_kthread_fn() and create_socket() returns 0 or error code, and not
task_struct/ERR_PTR.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Ronnie reported invalid request buffer access in chained command when
inserting garbage value to NextCommand of compound request.
This patch add validation check to avoid this issue.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Tested-by: Steve French <smfrench@gmail.com>
Reviewed-by: Steve French <smfrench@gmail.com>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In smb_common.c you have this function : ksmbd_smb_request() which
is called from connection.c once you have read the initial 4 bytes for
the next length+smb2 blob.
It checks the first byte of this 4 byte preamble for valid values,
i.e. a NETBIOSoverTCP SESSION_MESSAGE or a SESSION_KEEP_ALIVE.
We don't need to check this for ksmbd since it only implements SMB2
over TCP port 445.
The netbios stuff was only used in very old servers when SMB ran over
TCP port 139.
Now that we run over TCP port 445, this is actually not a NB header anymore
and you can just treat it as a 4 byte length field that must be less
than 16Mbyte. and remove the references to the RFC1002 constants that no
longer applies.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
instead of removing '..' in a given path, call
kern_path with LOOKUP_BENEATH flag to prevent
the out of share access.
ran various test on this:
smb2-cat-async smb://127.0.0.1/homes/../out_of_share
smb2-cat-async smb://127.0.0.1/homes/foo/../../out_of_share
smbclient //127.0.0.1/homes -c "mkdir ../foo2"
smbclient //127.0.0.1/homes -c "rename bar ../bar"
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Boehme <slow@samba.org>
Tested-by: Steve French <smfrench@gmail.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use LOOKUP_NO_SYMLINKS flags for default lookup to prohibit the middle of
symlink component lookup and remove follow symlinks parameter support.
We re-implement it as reparse point later.
Test result:
smbclient -Ulinkinjeon%1234 //172.30.1.42/share -c
"get hacked/passwd passwd"
NT_STATUS_OBJECT_NAME_NOT_FOUND opening remote file \hacked\passwd
Cc: Ralph Böhme <slow@samba.org>
Cc: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When second smb2 pdu has invalid protocol id, ksmbd doesn't detect it
and allow to process smb2 request. This patch add the check it in
ksmbd_verify_smb_message() and don't use protocol id of smb2 request as
protocol id of response.
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Ralph Böhme <slow@samba.org>
Reported-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows client expect to get default stream name(::DATA) in
FILE_STREAM_INFORMATION response even if there is no stream data in file.
This patch fix update failure when writing ppt or doc files.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-By: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
While we are working through detailed security reviews
of ksmbd server code we should remind users that it is an
experimental module by adding a warning when the module
loads. Currently the module shows as experimental
in Kconfig and is disabled by default, but we don't want
to confuse users.
Although ksmbd passes a wide variety of the
important functional tests (since initial focus had
been largely on functional testing such as smbtorture,
xfstests etc.), and ksmbd has added key security
features (e.g. GCM256 encryption, Kerberos support),
there are ongoing detailed reviews of the code base
for path processing and network buffer decoding, and
this patch reminds users that the module should be
considered "experimental."
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add validation to check whether req->InputBufferLength is smaller than
smb2_ea_info_req structure size.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Because of .., files outside the share directory
could be accessed. To prevent this, normalize
the given path and remove all . and ..
components.
In addition to the usual large set of regression tests (smbtorture
and xfstests), ran various tests on this to specifically check
path name validation including libsmb2 tests to verify path
normalization:
./examples/smb2-ls-async smb://172.30.1.15/homes2/../
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../../
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/..bar/
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar../
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar..
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar../../../../
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
rwlock.h specifically asks to not be included directly.
In fact, the proper spinlock.h include isn't needed either,
it comes with the huge pile that kthread.h ends up pulling
in, so just drop it entirely.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Addresses-Coverity reported Control flow issues in sid_to_id()
/fs/ksmbd/smbacl.c: 277 in sid_to_id()
271
272 if (sidtype == SIDOWNER) {
273 kuid_t uid;
274 uid_t id;
275
276 id = le32_to_cpu(psid->sub_auth[psid->num_subauth - 1]);
>>> CID 1506810: Control flow issues (NO_EFFECT)
>>> This greater-than-or-equal-to-zero comparison of an unsigned value
>>> is always true. "id >= 0U".
277 if (id >= 0) {
278 /*
279 * Translate raw sid into kuid in the server's user
280 * namespace.
281 */
282 uid = make_kuid(&init_user_ns, id);
Addresses-Coverity: ("Control flow issues")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently there are two ndr_read_int64 calls where ret is being checked
for failure but ret is not being assigned a return value from the call.
Static analyis is reporting the checks on ret as dead code. Fix this.
Addresses-Coverity: ("Logical dead code")
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If ndr->length is smaller than expected size, ksmbd can access invalid
access in ndr->data. This patch add validation to check ndr->offset is
over ndr->length. and added exception handling to check return value of
ndr read/write function.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_file_table_flush is a leftover from SMB1. This function is no longer
needed as SMB1 has been removed from ksmbd.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Becase smb direct header is mapped and msg->num_sge
already is incremented, the decrement should be
removed from the condition.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This log happens on servers with a network bridge since
the bridge does not have a specified link speed.
This is not a real error so change the error log to debug instead.
Signed-off-by: Per Forlin <perfn@axis.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When ownership is changed we might in certain scenarios loose the
ability to alter the inode after we changed ownership. This can e.g.
happen when we are on an idmapped mount where uid 0 is mapped to uid
1000 and uid 1000 is mapped to uid 0.
A caller with fs*id 1000 will be able to create files as *id 1000 on
disk. They will also be able to change ownership of files owned by *id 0
to *id 1000 but they won't be able to change ownership in the other
direction. This means acl operations following notify_change() would
fail. Move the notify_change() call after the acls have been updated.
This guarantees that we don't end up with spurious "hash value diff"
warnings later on because we managed to change ownership but didn't
manage to alter acls.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Permission checking and copying over ownership information is the task
of the underlying filesystem not ksmbd. The order is also wrong here.
This modifies the inode before notify_change(). If notify_change() fails
this will have changed ownership nonetheless. All of this is unnecessary
though since the underlying filesystem's ->setattr handler will do all
this (if required) by itself.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It seems the error was accidently ignored until now. Make sure it is
surfaced.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The sid_to_id() helper encodes raw ownership information suitable for
s*id handling. This is conceptually equivalent to reporting ownership
information via stat to userspace. In this case the consumer is ksmbd
instead of a regular user. So when encoding raw ownership information
suitable for s*id handling later we need to map the id up according to
the user namespace of ksmbd itself taking any idmapped mounts into
account.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The sid_to_id() functions is relevant when changing ownership of
filesystem objects based on acl information. In this case we need to
first translate the relevant s*ids into k*ids in ksmbd's user namespace
and account for any idmapped mounts. Requesting a change in ownership
requires the inverse translation to be applied when we would report
ownership to userspace. So k*id_from_mnt() must be used here.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's not obvious why subauth 0 would be excluded from translation. This
would lead to wrong results whenever a non-identity idmapping is used.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The ksmbd server performs translation of posix acls to smb acls.
Currently the translation is wrong since the idmapping of the mount is
used to map the ids into raw userspace ids but what is relevant is the
user namespace of ksmbd itself. The user namespace of ksmbd itself which
is the initial user namespace. The operation is similar to asking "What
*ids would a userspace process see given that k*id in the relevant user
namespace?". Before the final translation we need to apply the idmapping
of the mount in case any is used. Add two simple helpers for ksmbd.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When creating new filesystem objects ksmbd translates between k*ids and
s*ids. For this it often uses struct smb_fattr and stashes the k*ids in
cf_uid and cf_gid. Let cf_uid and cf_gid always contain the final
information taking any potential idmapped mounts into account. When
finally translation cf_*id into s*ids translate them into the user
namespace of ksmbd since that is the relevant user namespace here.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When transferring ownership information to the client the k*ids are
translated into raw *ids before they are sent over the wire. The
function currently erroneously translates the k*ids according to the
mount's idmapping. Instead, reporting the owning *ids to userspace the
underlying k*ids need to be mapped up in the caller's user namespace.
This is how stat() works.
The caller in this instance is ksmbd itself and ksmbd always runs in the
initial user namespace. Translate according to that taking any potential
idmapped mounts into account.
Switch to from_k*id_munged() which ensures that the overflow*id is
returned instead of the (*id_t)-1 when the k*id can't be translated.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When transferring ownership information to the
client the k*ids are translated into raw *ids before they are sent over
the wire. The function currently erroneously translates the k*ids
according to the mount's idmapping. Instead, reporting the owning *ids
to userspace the underlying k*ids need to be mapped up in the caller's
user namespace. This is how stat() works.
The caller in this instance is ksmbd itself and ksmbd always runs in the
initial user namespace. Translate according to that.
The idmapping of the mount is already taken into account by the lower
filesystem and so kstat->*id will contain the mapped k*ids.
Switch to from_k*id_munged() which ensures that the overflow*id is
returned instead of the (*id_t)-1 when the k*id can't be translated.
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's great that the new in-kernel ksmbd server will support idmapped
mounts out of the box! However, lookup is currently broken. Lookup
helpers such as lookup_one_len() call inode_permission() internally to
ensure that the caller is privileged over the inode of the base dentry
they are trying to lookup under. So the permission checking here is
currently wrong.
Linux v5.15 will gain a new lookup helper lookup_one() that does take
idmappings into account. I've added it as part of my patch series to
make btrfs support idmapped mounts. The new helper is in linux-next as
part of David's (Sterba) btrfs for-next branch as commit
c972214c133b ("namei: add mapping aware lookup helper").
I've said it before during one of my first reviews: I would very much
recommend adding fstests to [1]. It already seems to have very
rudimentary cifs support. There is a completely generic idmapped mount
testsuite that supports idmapped mounts.
[1]: https://git.kernel.org/pub/scm/fs/xfs/xfsprogs-dev.git/
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Steve French <stfrench@microsoft.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: David Sterba <dsterba@suse.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Dan reported __write_overflow warning in ndr_read_string.
CC [M] fs/ksmbd/ndr.o
In file included from ./include/linux/string.h:253,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:22,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/ksmbd/ndr.c:7:
In function memcpy,
inlined from ndr_read_string at fs/ksmbd/ndr.c:86:2,
inlined from ndr_decode_dos_attr at fs/ksmbd/ndr.c:167:2:
./include/linux/fortify-string.h:219:4: error: call to __write_overflow
declared with attribute error: detected write beyond size of object
__write_overflow();
^~~~~~~~~~~~~~~~~~
This seems to be a false alarm because hex_attr size is always smaller
than n->length. This patch fix this warning by allocation hex_attr with
n->length.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When commanding chmod and chown on cifs&ksmbd, ksmbd allows it without file
permissions check. There is code to check it in settattr_prepare.
Instead of setting the inode directly, update the mode and uid/gid
through notify_change.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When there is no dacl in request, ksmbd send dacl that coverted by using
file permission. This patch don't set FILE DELETE and FILE_DELETE_CHILD
in access mask by default.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
if server shutdown happens in the situation that
there are connections, workqueue could be destroyed
before queueing disconnect work.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd is forcing to turn on FS_POSIX_ACL in Kconfig to use vfs acl
functions(posix_acl_alloc, get_acl, set_posix_acl). OpenWRT and other
platform doesn't use acl and this config is disable by default in
kernel. This patch use IS_ENABLED() to know acl config is enable and use
acl function if it is enable.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use proper errno instead of -1 in smb2_get_ksmbd_tcon().
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Update the comment for smb2_get_ksmbd_tcon().
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change data type of function that return only 0 or 1 to boolean.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
To negotiate either the SMB2 protocol or SMB protocol, a client must
send a SMB_COM_NEGOTIATE message containing the list of dialects it
supports, to which the server will respond with either a
SMB_COM_NEGOTIATE or a SMB2_NEGOTIATE response.
The current implementation responds with the highest common dialect,
rather than looking explicitly for "SMB 2.???" and "SMB 2.002", as
indicated in [MS-SMB2]:
[MS-SMB2] 3.3.5.3.1:
If the server does not implement the SMB 2.1 or 3.x dialect family,
processing MUST continue as specified in 3.3.5.3.2.
Otherwise, the server MUST scan the dialects provided for the dialect
string "SMB 2.???". If the string is not present, continue to section
3.3.5.3.2. If the string is present, the server MUST respond with an
SMB2 NEGOTIATE Response as specified in 2.2.4.
[MS-SMB2] 3.3.5.3.2:
The server MUST scan the dialects provided for the dialect string "SMB
2.002". If the string is present, the client understands SMB2, and the
server MUST respond with an SMB2 NEGOTIATE Response.
This is an issue if a client attempts to negotiate SMB3.1.1 using
a SMB_COM_NEGOTIATE, as it will trigger the following NULL pointer
dereference:
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = 1917455e
[00000000] *pgd=00000000
Internal error: Oops: 17 [#1] ARM
CPU: 0 PID: 60 Comm: kworker/0:1 Not tainted 5.4.60-00027-g0518c02b5c5b #35
Hardware name: Marvell Kirkwood (Flattened Device Tree)
Workqueue: ksmbd-io handle_ksmbd_work
PC is at ksmbd_gen_preauth_integrity_hash+0x24/0x190
LR is at smb3_preauth_hash_rsp+0x50/0xa0
pc : [<802b7044>] lr : [<802d6ac0>] psr: 40000013
sp : bf199ed8 ip : 00000000 fp : 80d1edb0
r10: 80a3471b r9 : 8091af16 r8 : 80d70640
r7 : 00000072 r6 : be95e198 r5 : ca000000 r4 : b97fee00
r3 : 00000000 r2 : 00000002 r1 : b97fea00 r0 : b97fee00
Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 0005317f Table: 3e7f4000 DAC: 00000055
Process kworker/0:1 (pid: 60, stack limit = 0x3dd1fdb4)
Stack: (0xbf199ed8 to 0xbf19a000)
9ec0: b97fee00 00000000
9ee0: be95e198 00000072 80d70640 802d6ac0 b3da2680 b97fea00 424d53ff be95e140
9f00: b97fee00 802bd7b0 bf10fa58 80128a78 00000000 000001c8 b6220000 bf0b7720
9f20: be95e198 80d0c410 bf7e2a00 00000000 00000000 be95e19c 80d0c370 80123b90
9f40: bf0b7720 be95e198 bf0b7720 bf0b7734 80d0c410 bf198000 80d0c424 80d116e0
9f60: bf10fa58 801240c0 00000000 bf10fa40 bf1463a0 bf198000 bf0b7720 80123ed0
9f80: bf077ee4 bf10fa58 00000000 80127f80 bf1463a0 80127e88 00000000 00000000
9fa0: 00000000 00000000 00000000 801010d0 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<802b7044>] (ksmbd_gen_preauth_integrity_hash) from [<802d6ac0>] (smb3_preauth_hash_rsp+0x50/0xa0)
[<802d6ac0>] (smb3_preauth_hash_rsp) from [<802bd7b0>] (handle_ksmbd_work+0x348/0x3f8)
[<802bd7b0>] (handle_ksmbd_work) from [<80123b90>] (process_one_work+0x160/0x200)
[<80123b90>] (process_one_work) from [<801240c0>] (worker_thread+0x1f0/0x2e4)
[<801240c0>] (worker_thread) from [<80127f80>] (kthread+0xf8/0x10c)
[<80127f80>] (kthread) from [<801010d0>] (ret_from_fork+0x14/0x24)
Exception stack(0xbf199fb0 to 0xbf199ff8)
9fa0: 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Code: e1855803 e5d13003 e1855c03 e5903094 (e1d330b0)
---[ end trace 8d03be3ed09e5699 ]---
Kernel panic - not syncing: Fatal exception
smb3_preauth_hash_rsp() panics because conn->preauth_info is only allocated
when processing a SMB2 NEGOTIATE request.
Fix this by splitting the smb_protos array into two, each containing
only SMB1 and SMB2 dialects respectively.
While here, make ksmbd_negotiate_smb_dialect() static as it not
called from anywhere else.
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If smb2_get_name() then name is an error pointer. In the clean up
code, we try to kfree() it and that will lead to an Oops. Set it to
NULL instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd create socket with IPv6 to listen both IPv4 and IPv6 connection
from client. Server should send IP addresses of NICs through network
interface info response. If Client connection is IPv4, Server should
fill IPv4 address in response buffer. But ss_family is always PF_INET6
on IPv6 socket. So This patch add ipv6_addr_v4mapped check to know
client connection is IPv4.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Dan report a warning that is missing error code in smb2_lock
from static checker. This patch add error code to avoid static checker
warning.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows client disconnect connection by wrong signed SMB2 session
setup response on SMB3 multichannel mode.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd does not support RSS mode stably.
RSS mode enabling will be set later.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Both Windows 10's SMB server and samba return STATUS_OBJECT_PATH_NOT_FOUND
when trying to access a nonexistent path.
This fixes Windows 10 File History tool. The latter relies on the server
returning STATUS_OBJECT_PATH_NOT_FOUND to figure out what part of the
target path needs to be created. Returning STATUS_OBJECT_NAME_INVALID
will make it stop and display an error to the user.
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Kernel test bot reports the following warnings:
In function 'ndr_write_string',
inlined from 'ndr_encode_dos_attr' at fs/ksmbd/ndr.c:136:3:
>> fs/ksmbd/ndr.c:70:2: warning: 'strncpy' destination unchanged after
copying no bytes [-Wstringop-truncation]
70 | strncpy(PAYLOAD_HEAD(n), value, sz);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'ndr_write_string',
inlined from 'ndr_encode_dos_attr' at fs/ksmbd/ndr.c:134:3:
>> fs/ksmbd/ndr.c:70:2: warning: 'strncpy' output truncated before
terminating nul copying as many bytes from a string as its length
[-Wstringop-truncation]
70 | strncpy(PAYLOAD_HEAD(n), value, sz);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/ksmbd/ndr.c: In function 'ndr_encode_dos_attr':
fs/ksmbd/ndr.c:134:3: note: length computed here
134 | ndr_write_string(n, hex_attr, strlen(hex_attr));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_socket must be freed even if kernel_sock_shutdown() somehow fails.
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Support for faster packet signing (using GMAC instead of CMAC) can
now be negotiated to some newer servers, including Windows.
See MS-SMB2 section 2.2.3.17.
This patch adds support for sending the new negotiate context with two
supported signing algorithms(AES-CMAC, HMAC-SHA256).
If client add support for AES_GMAC, Server will be supported later
depend on it.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch add negotiate context verification code to check bounds.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move credit charge verification over smb2 request size verification
to avoid being skipped.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
MS-SMB2 specification describe :
If the calculated credit number is greater than the CreditCharge,
the server MUST fail the request with the error code
STATUS_INVALID_PARAMETER.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When user insert wrong password, ksmbd return STATUS_INVALID_PARAMETER
error status to client. It will make user confusing whether it is not
password problem. This patch change error status to
STATUS_LOGON_FAILURE. and return STATUS_INSUFFICIENT_RESOURCES if memory
allocation failed on session setup.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use smb2_compression_ctx instead of smb2_encryption_neg_context.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon