Pull x86 fixes from Peter Anvin:
- Three EFI-related fixes
- Two early memory initialization fixes
- build fix for older binutils
- fix for an eager FPU performance regression -- currently we don't
allow the use of the FPU at interrupt time *at all* in eager mode,
which is clearly wrong.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Allow FPU to be used at interrupt time even with eagerfpu
x86, crc32-pclmul: Fix build with older binutils
x86-64, init: Fix a possible wraparound bug in switchover in head_64.S
x86, range: fix missing merge during add range
x86, efi: initial the local variable of DataSize to zero
efivar: fix oops in efivar_update_sysfs_entries() caused by memory reuse
efivarfs: Never return ENOENT from firmware again
With the addition of eagerfpu the irq_fpu_usable() now returns false
negatives especially in the case of ksoftirqd and interrupted idle task,
two common cases for FPU use for example in networking/crypto. With
eagerfpu=off FPU use is possible in those contexts. This is because of
the eagerfpu check in interrupted_kernel_fpu_idle():
...
* For now, with eagerfpu we will return interrupted kernel FPU
* state as not-idle. TBD: Ideally we can change the return value
* to something like __thread_has_fpu(current). But we need to
* be careful of doing __thread_clear_has_fpu() before saving
* the FPU etc for supporting nested uses etc. For now, take
* the simple route!
...
if (use_eager_fpu())
return 0;
As eagerfpu is automatically "on" on those CPUs that also have the
features like AES-NI this patch changes the eagerfpu check to return 1 in
case the kernel_fpu_begin() has not been said yet. Once it has been the
__thread_has_fpu() will start returning 0.
Notice that with eagerfpu the __thread_has_fpu is always true initially.
FPU use is thus always possible no matter what task is under us, unless
the state has already been saved with kernel_fpu_begin().
[ hpa: this is a performance regression, not a correctness regression,
but since it can be quite serious on CPUs which need encryption at
interrupt time I am marking this for urgent/stable. ]
Signed-off-by: Pekka Riikonen <priikone@iki.fi>
Link: http://lkml.kernel.org/r/alpine.GSO.2.00.1305131356320.18@git.silcnet.org
Cc: <stable@vger.kernel.org> v3.7+
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
binutils prior to 2.18 (e.g. the ones found on SLE10) don't support
assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ
in the same file should be used.
This requires making the helper macros capable of recognizing 32-bit
general purpose register operands.
[ hpa: tagging for stable as it is a low risk build fix ]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com
Cc: Alexander Boyko <alexander_boyko@xyratex.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <stable@vger.kernel.org> v3.9
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
- Use proper error paths
- Clean up APIC IPI usage (incorrect arguments)
- Delay XenBus frontend resume is backend (xenstored) is not running
- Fix build error with various combinations of CONFIG_
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRp59pAAoJEFjIrFwIi8fJRIYIAKvRh2Dp/AB44ZN97MW/QhEN
NUvrSTYr2HlqcUW7bv0ScrMLb0LlFeo+9s/bo0KI2+2F+zK822WPC+2KEZmzQIVs
q261dNsA3/HoyBDOLwWjatjsSus+njBOEgDIwARPwhkoon4fRXBnRJVMy+0bZC3I
fpd1nlUy0J7jW0QLO5ueKqd5ZN0Mkwn2H4+D8TOPVYHCnk3mT2W+qLCEJmkMxOuZ
iFYy95K1ky5r0leUUwCTUIGLmgftoh0Qo/RweXSmzuLiZrY+5ilike3gxQSiAjsM
lIjq+gKXNJJGz4M6wbOTfDzb/WQnKD+2PqlsbulrTD7E6RD6wIsqG/zvc1RqHqw=
=9gi8
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen fixes from Konrad Rzeszutek Wilk:
- Use proper error paths
- Clean up APIC IPI usage (incorrect arguments)
- Delay XenBus frontend resume is backend (xenstored) is not running
- Fix build error with various combinations of CONFIG_
* tag 'stable/for-linus-3.10-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvm
xen-pciback: more uses of cached MSI-X capability offset
xen: Clean up apic ipi interface
xenbus: save xenstore local status for later use
xenbus: delay xenbus frontend resume if xenstored is not running
xmem/tmem: fix 'undefined variable' build error.
Commit f447d56d36 introduced the
implementation of the PV apic ipi interface. But there were some
odd things (it seems none of which cause really any issue but
maybe they should be cleaned up anyway):
- xen_send_IPI_mask_allbutself (and by that xen_send_IPI_allbutself)
ignore the passed in vector and only use the CALL_FUNCTION_SINGLE
vector. While xen_send_IPI_all and xen_send_IPI_mask use the vector.
- physflat_send_IPI_allbutself is declared unnecessarily. It is never
used.
This patch tries to clean up those things.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
In head_64.S, a switchover has been used to handle kernel crossing
1G, 512G boundaries.
And commit 8170e6bed4
x86, 64bit: Use a #PF handler to materialize early mappings on demand
said:
During the switchover in head_64.S, before #PF handler is available,
we use three pages to handle kernel crossing 1G, 512G boundaries with
sharing page by playing games with page aliasing: the same page is
mapped twice in the higher-level tables with appropriate wraparound.
But from the switchover code, when we set up the PUD table:
114 addq $4096, %rdx
115 movq %rdi, %rax
116 shrq $PUD_SHIFT, %rax
117 andl $(PTRS_PER_PUD-1), %eax
118 movq %rdx, (4096+0)(%rbx,%rax,8)
119 movq %rdx, (4096+8)(%rbx,%rax,8)
It seems line 119 has a potential bug there. For example,
if the kernel is loaded at physical address 511G+1008M, that is
000000000 111111111 111111000 000000000000000000000
and the kernel _end is 512G+2M, that is
000000001 000000000 000000001 000000000000000000000
So in this example, when using the 2nd page to setup PUD (line 114~119),
rax is 511.
In line 118, we put rdx which is the address of the PMD page (the 3rd page)
into entry 511 of the PUD table. But in line 119, the entry we calculate from
(4096+8)(%rbx,%rax,8) has exceeded the PUD page. IMO, the entry in line
119 should be wraparound into entry 0 of the PUD table.
The patch fixes the bug.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/5191DE5A.3020302@cn.fujitsu.com
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@vger.kernel.org> v3.9
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull crypto fixes from Herbert Xu:
"This push fixes a crash in the new sha256_ssse3 driver as well as a
DMA setup/teardown bug in caam"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementations
crypto: caam - fix inconsistent assoc dma mapping direction
The _XFER stack element size was set too small, 8 bytes, when it needs to be
16 bytes. As _XFER is the last stack element used by these implementations,
the 16 byte stores with 'movdqa' corrupt the stack where the value of register
%r12 is temporarily stored. As these implementations align the stack pointer
to 16 bytes, this corruption did not happen every time.
Patch corrects this issue.
Reported-by: Julian Wollrath <jwollrath@web.de>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Tested-by: Julian Wollrath <jwollrath@web.de>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Moorestown
Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0"
Hotplug
PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJRnnUuAAoJEFmIoMA60/r8+JwQALrHdQvA8rGl/TNF0xkJjsU+
EfdkBj23+qYYsYNla7Z/CfY7k5gXTtymqauhzpa1VRoY/bkpSWMDBxK551CxgBae
RW0JbZxfoswLlA9eVRUz6mlUl7hL0Ky0/E6d9/UBXSAC0wsN6BB11lqKgi/uxAr2
ACuZBZW1EZP9zoD615Id5gtRAZe8+9w47p8d6kQcyJntmCoZwo8Na/HRE/tR+wVY
o3AHMxMOr9Ac+G3/rFl5ffzoHkLwTws4UEVNhvKBek3ogsAau3tgeIgjjvFRToFh
HxsdpCmgOAfjCF/RC0AxRugtykHw4n3WlaND2WM6JWolLeIQTZr41GlwYy4F1CRG
gSRk0dMNGBYs9OgDC81KJGYqstHwL0MTig2ul4BvlrLanLnySgVu1kbhaerR3WzA
11k0GwlJbkFMCbQLZDaq51KHAdDYnCsRVG/tOGmsM8puUPOTXu3pLbPk3SbgWVGc
7vbUkjJlHwlNoUbeyOOOElUMCRnIiCl/IetwjgZb+Qibq2dO4v6WF5GR+2DPBwua
8GNbzQXyNxOPzvYBHE4YgK5lcb7yVeLvlOtPgbM0UMqC1SnFISzJRiNpfbj21rAk
ADT4lqL29vqkX37uIQ55KPeTTThA65EKUoI3+dNtGHLSPoKdt3QlJc9wwQNKxEzx
EEHxGRkebYNcPB1GqwEl
=M8/H
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Here are some more fixes for v3.10. The Moorestown update broke Intel
Medfield devices, so I reverted it. The acpiphp change fixes a
regression: we broke hotplug notifications to host bridges when we
split acpiphp into the host-bridge related part and the
endpoint-related part.
Moorestown
Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0"
Hotplug
PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check"
* tag 'pci-v3.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0"
PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check
efivarfs if an EFI variable gets deleted from under us and return EOF
when reading from a zero-length file - Lingzhu Xiang
* Fix an oops in efivar_update_sysfs_entries() caused by reusing (and
therefore corrupting) a kzalloc() allocation - Seiji Aguchi
* Initialise the DataSize argument to GetVariable() otherwise it will
not be updated with the actual size of the variable on return.
Discovered on a Acer Aspire V3 BIOS - Lee, Chun-Yi
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=8+a3
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' into x86/urgent
* Avoid confusing the user by returning -EIO instead of -ENOENT in
efivarfs if an EFI variable gets deleted from under us and return EOF
when reading from a zero-length file - Lingzhu Xiang
* Fix an oops in efivar_update_sysfs_entries() caused by reusing (and
therefore corrupting) a kzalloc() allocation - Seiji Aguchi
* Initialise the DataSize argument to GetVariable() otherwise it will
not be updated with the actual size of the variable on return.
Discovered on a Acer Aspire V3 BIOS - Lee, Chun-Yi
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
In commit 78d77df715 ("x86-64, init: Do not set NX bits on non-NX
capable hardware") we added the early_pmd_flags that gets the NX bit set
when a CPU supports NX. However, the new variable was marked __initdata,
because the main _use_ of this is in an __init routine.
However, the bit setting happens from secondary_startup_64(), which is
called not only at bootup, but on every secondary CPU start. Including
resuming from STR and at CPU hotplug time. So the value cannot be
__initdata.
Reported-bisected-and-tested-by: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org # v3.9
Acked-by: Peter Anvin <hpa@linux.intel.com>
Cc: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 fixes from Thomas Gleixner:
- Fix for a CPU hot-add deadlock in microcode update code
- Fix for idle consolidation fallout
- Documentation update for initial kernel direct mapping
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Add missing comments for initial kernel direct mapping
x86/microcode: Add local mutex to fix physical CPU hot-add deadlock
x86: Fix idle consolidation fallout
Pull timer fixes from Thomas Gleixner:
- Cure for not using zalloc in the first place, which leads to random
crashes with CPUMASK_OFF_STACK.
- Revert a user space visible change which broke udev
- Add a missing cpu_online early return introduced by the new full
dyntick conversions
- Plug a long standing race in the timer wheel cpu hotplug code.
Sigh...
- Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu
up.
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons
timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE
tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline
tick: Cleanup NOHZ per cpu data on cpu down
tick: Use zalloc_cpumask_var for allocating offstack cpumasks
Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config,
which enables some minor compile time optimization to avoid
uncessary code in mostly the suspend/resume path could cause
problems for userland.
In particular, the dependency for RTC_HCTOSYS on
!ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time
twice and simplifies suspend/resume, has the side effect
of causing the /sys/class/rtc/rtcN/hctosys flag to always be
zero, and this flag is commonly used by udev to setup the
/dev/rtc symlink to /dev/rtcN, which can cause pain for
older applications.
While the udev rules could use some work to be less fragile,
breaking userland should strongly be avoided. Additionally
the compile time optimizations are fairly minor, and the code
being optimized is likely to be reworked in the future, so
lets revert this change.
Reported-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: stable <stable@vger.kernel.org> #3.9
Cc: Feng Tang <feng.tang@intel.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Link: http://lkml.kernel.org/r/1366828376-18124-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
That will be better initial the value of DataSize to zero for the input of
GetVariable(), otherwise we will feed a random value. The debug log of input
DataSize like this:
...
[ 195.915612] EFI Variables Facility v0.08 2004-May-17
[ 195.915819] efi: size: 18446744071581821342
[ 195.915969] efi: size': 18446744071581821342
[ 195.916324] efi: size: 18446612150714306560
[ 195.916632] efi: size': 18446612150714306560
[ 195.917159] efi: size: 18446612150714306560
[ 195.917453] efi: size': 18446612150714306560
...
The size' is value that was returned by BIOS.
After applied this patch:
[ 82.442042] EFI Variables Facility v0.08 2004-May-17
[ 82.442202] efi: size: 0
[ 82.442360] efi: size': 1039
[ 82.443828] efi: size: 0
[ 82.444127] efi: size': 2616
[ 82.447057] efi: size: 0
[ 82.447356] efi: size': 5832
...
Found on Acer Aspire V3 BIOS, it will not return the size of data if we input a
non-zero DataSize.
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
- More fixes in the vCPU PVHVM hotplug path.
- Add more documentation.
- Fix various ARM related issues in the Xen generic drivers.
- Updates in the xen-pciback driver per Bjorn's updates.
- Mask the x2APIC feature for PV guests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRjPL5AAoJEFjIrFwIi8fJdlIIANXawH+B+aFbqsFSKOOh76XN
smgICU78SVzKpW9WAPYK7YFqSdNN4AleGC2Mn2lSkiaqgciRyDb9Yt+OSMMts2Xn
ZVbFkGhEKR+DtZfTKo9YgsGatul/McTiVEkuuli+aN5dql3WXDLAaA+/b9bO3ohh
TCWtWNuSCGmlfDoJET2je+J6CgKvCErH3fvzKNxgYxytcGhAvxoVK/lC4d3pnq/m
wQUAIcF8XYENqC2m1WDR0OGveAB0Me0j9g+UkQS+TzqA8GPmxC4aptjkroFYhOz6
8nZp+LanimmTI6olVioWEXkCr5+dxb058jQKwncQfonFpl58RS0qUrz5zoe3etU=
=h9SX
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
- More fixes in the vCPU PVHVM hotplug path.
- Add more documentation.
- Fix various ARM related issues in the Xen generic drivers.
- Updates in the xen-pciback driver per Bjorn's updates.
- Mask the x2APIC feature for PV guests.
* tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/pci: Used cached MSI-X capability offset
xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST
xen: mask x2APIC feature in PV
xen: SWIOTLB is only used on x86
xen/spinlock: Fix check from greater than to be also be greater or equal to.
xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info
xen/vcpu: Document the xen_vcpu_info and xen_vcpu
xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
Pull idle update from Len Brown:
"Add support for new Haswell-ULT CPU idle power states"
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
intel_idle: initial C8, C9, C10 support
tools/power turbostat: display C8, C9, C10 residency
Pull stray syscall bits from Al Viro:
"Several syscall-related commits that were missing from the original"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE
unicore32: just use mmap_pgoff()...
unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE
x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)
Pull kvm fixes from Gleb Natapov:
"Most of the fixes are in the emulator since now we emulate more than
we did before for correctness sake we see more bugs there, but there
is also an OOPS fixed and corruption of xcr0 register."
* tag 'kvm-3.10-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: emulator: emulate SALC
KVM: emulator: emulate XLAT
KVM: emulator: emulate AAM
KVM: VMX: fix halt emulation while emulating invalid guest sate
KVM: Fix kvm_irqfd_init initialization
KVM: x86: fix maintenance of guest/host xcr0 state
We now cache the MSI-X capability offset in the struct pci_dev, so no
need to find the capability again.
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the
Table Offset register, not the flags ("Message Control" per spec)
register.
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Two sets of comments were lost during patch-series shuffling:
- comments for init_range_memory_mapping()
- comments in init_mem_mapping that is helpful for reminding people
that the pagetable is setup top-down
The comments were written by Yinghai in his patch in:
https://lkml.org/lkml/2012/11/28/620
This patch reintroduces them.
Originally-From: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/518BC776.7010506@gmail.com
[ Tidied it all up a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MSI
PCI: Set ->mask_pos correctly
Hotplug
PCI: Delay final fixups until resources are assigned
Moorestown
x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=B2U8
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"MSI:
PCI: Set ->mask_pos correctly
Hotplug:
PCI: Delay final fixups until resources are assigned
Moorestown:
x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0"
* tag 'pci-v3.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Delay final fixups until resources are assigned
x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0
PCI: Set ->mask_pos correctly
GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid
cases for enableing GENERIC_GPIO without GPIOLIB, even though it is
possible to do so which has been causing confusion and breakage. This
branch does the work to completely eliminate GENERIC_GPIO.
However, it is not trivial to just create a branch to remove it. Over
the course of the v3.9 cycle more code referencing GENERIC_GPIO has been
added to linux-next that conflicts with this branch. The following must
be done to resolve the conflicts when merging this branch into mainline:
* "git grep CONFIG_GENERIC_GPIO" should return 0 hits. Matches should be
replaced with CONFIG_GPIOLIB
* "git grep '\bGENERIC_GPIO\b'" should return 1 hit in the Chinese
documentation.
* Selectors of GENERIC_GPIO should be turned into selectors of GPIOLIB
* definitions of the option in architecture Kconfig code should be deleted.
Stephen has 3 merge fixup patches[1] that do the above. They are currently
applicable on mainline as of May 2nd.
[1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg428056.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=xodc
-----END PGP SIGNATURE-----
Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux
Pull removal of GENERIC_GPIO from Grant Likely:
"GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any
valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it
is possible to do so which has been causing confusion and breakage.
This branch does the work to completely eliminate GENERIC_GPIO."
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux:
gpio: update gpio Chinese documentation
Remove GENERIC_GPIO config option
Convert selectors of GENERIC_GPIO to GPIOLIB
blackfin: force use of gpiolib
m68k: coldfire: use gpiolib
mips: pnx833x: remove requirement for GENERIC_GPIO
openrisc: default GENERIC_GPIO to false
avr32: default GENERIC_GPIO to false
xtensa: remove explicit selection of GENERIC_GPIO
sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
powerpc: remove redundant GENERIC_GPIO selection
unicore32: default GENERIC_GPIO to false
unicore32: remove unneeded select GENERIC_GPIO
arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB
arm: remove redundant GENERIC_GPIO selection
mips: alchemy: require gpiolib
mips: txx9: change GENERIC_GPIO to GPIOLIB
mips: loongson: use GPIO driver on CONFIG_GPIOLIB
mips: remove redundant GENERIC_GPIO select
This is an almost-undocumented instruction available in 32-bit mode.
I say "almost" undocumented because AMD documents it in their opcode
maps just to say that it is unavailable in 64-bit mode (sections
"A.2.1 One-Byte Opcodes" and "B.3 Invalid and Reassigned Instructions
in 64-Bit Mode").
It is roughly equivalent to "sbb %al, %al" except it does not
set the flags. Use fastop to emulate it, but do not use the opcode
directly because it would fail if the host is 64-bit!
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1.
It is just a MOV in disguise, with a funny source address.
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1.
AAM needs the source operand to be unsigned; do the same in AAD as well
for consistency, even though it does not affect the result.
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This can easily be triggered if a new CPU is added (via
ACPI hotplug mechanism) and from user-space you do:
echo 1 > /sys/devices/system/cpu/cpu3/online
(or wait for UDEV to do it) on a newly appeared physical CPU.
The deadlock is that the "store_online" in drivers/base/cpu.c
takes the cpu_hotplug_driver_lock() lock, then calls "cpu_up".
"cpu_up" eventually ends up calling "save_mc_for_early"
which also takes the cpu_hotplug_driver_lock() lock.
And here is that lockdep thinks of it:
smpboot: Stack at about ffff880075c39f44
smpboot: CPU3: has booted.
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25
=============================================
[ INFO: possible recursive locking detected ]
3.9.0upstream-10129-g167af0e #1 Not tainted
---------------------------------------------
sh/2487 is trying to acquire lock:
(x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff81075512>] cpu_hotplug_driver_lock+0x12/0x20
but task is already holding lock:
(x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff81075512>] cpu_hotplug_driver_lock+0x12/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(x86_cpu_hotplug_driver_mutex);
lock(x86_cpu_hotplug_driver_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by sh/2487:
#0: (sb_writers#5){.+.+.+}, at: [<ffffffff811ca48d>] vfs_write+0x17d/0x190
#1: (&buffer->mutex){+.+.+.}, at: [<ffffffff812464ef>] sysfs_write_file+0x3f/0x160
#2: (s_active#20){.+.+.+}, at: [<ffffffff81246578>] sysfs_write_file+0xc8/0x160
#3: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff81075512>] cpu_hotplug_driver_lock+0x12/0x20
#4: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff810961c2>] cpu_maps_update_begin+0x12/0x20
#5: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff810962a7>] cpu_hotplug_begin+0x27/0x60
Suggested-and-Acked-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: fenghua.yu@intel.com
Cc: xen-devel@lists.xensource.com
Cc: stable@vger.kernel.org # for v3.9
Link: http://lkml.kernel.org/r/1368029583-23337-1-git-send-email-konrad.wilk@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The invalid guest state emulation loop does not check halt_request
which causes 100% cpu loop while guest is in halt and in invalid
state, but more serious issue is that this leaves halt_request set, so
random instruction emulated by vm86 #GP exit can be interpreted
as halt which causes guest hang. Fix both problems by handling
halt_request in emulation loop.
Reported-by: Tomas Papan <tomas.papan@gmail.com>
Tested-by: Tomas Papan <tomas.papan@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
During review of git commit cb9c6f15f3
("xen/spinlock: Check against default value of -1 for IRQ line.")
Stefano pointed out a bug in the patch. Unfortunatly due to vacation
timing the fix was not applied and this patch fixes it up.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
As it will point to some data, but not event channel data (the
shared_info has an array limited to 32).
This means that for PVHVM guests with more than 32 VCPUs without
the usage of VCPUOP_register_info any interrupts to VCPUs
larger than 32 would have gone unnoticed during early bootup.
That is OK, as during early bootup, in smp_init we end up calling
the hotplug mechanism (xen_hvm_cpu_notify) which makes the
VCPUOP_register_vcpu_info call for all VCPUs and we can receive
interrupts on VCPUs 33 and further.
This is just a cleanup.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Emulation of xcr0 writes zero guest_xcr0_loaded variable so that
subsequent VM-entry reloads CPU's xcr0 with guests xcr0 value.
However, this is incorrect because guest_xcr0_loaded variable is
read to decide whether to reload hosts xcr0.
In case the vcpu thread is scheduled out after the guest_xcr0_loaded = 0
assignment, and scheduler decides to preload FPU:
switch_to
{
__switch_to
__math_state_restore
restore_fpu_checking
fpu_restore_checking
if (use_xsave())
fpu_xrstor_checking
xrstor64 with CPU's xcr0 == guests xcr0
Fix by properly restoring hosts xcr0 during emulation of xcr0 writes.
Analyzed-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Merge rwsem optimizations from Michel Lespinasse:
"These patches extend Alex Shi's work (which added write lock stealing
on the rwsem slow path) in order to provide rwsem write lock stealing
on the fast path (that is, without taking the rwsem's wait_lock).
I have unfortunately been unable to push this through -next before due
to Ingo Molnar / David Howells / Peter Zijlstra being busy with other
things. However, this has gotten some attention from Rik van Riel and
Davidlohr Bueso who both commented that they felt this was ready for
v3.10, and Ingo Molnar has said that he was OK with me pushing
directly to you. So, here goes :)
Davidlohr got the following test results from pgbench running on a
quad-core laptop:
| db_size | clients | tps-vanilla | tps-rwsem |
+---------+----------+----------------+--------------+
| 160 MB | 1 | 5803 | 6906 | + 19.0%
| 160 MB | 2 | 13092 | 15931 |
| 160 MB | 4 | 29412 | 33021 |
| 160 MB | 8 | 32448 | 34626 |
| 160 MB | 16 | 32758 | 33098 |
| 160 MB | 20 | 26940 | 31343 | + 16.3%
| 160 MB | 30 | 25147 | 28961 |
| 160 MB | 40 | 25484 | 26902 |
| 160 MB | 50 | 24528 | 25760 |
------------------------------------------------------
| 1.6 GB | 1 | 5733 | 7729 | + 34.8%
| 1.6 GB | 2 | 9411 | 19009 | + 101.9%
| 1.6 GB | 4 | 31818 | 33185 |
| 1.6 GB | 8 | 33700 | 34550 |
| 1.6 GB | 16 | 32751 | 33079 |
| 1.6 GB | 20 | 30919 | 31494 |
| 1.6 GB | 30 | 28540 | 28535 |
| 1.6 GB | 40 | 26380 | 27054 |
| 1.6 GB | 50 | 25241 | 25591 |
------------------------------------------------------
| 7.6 GB | 1 | 5779 | 6224 |
| 7.6 GB | 2 | 10897 | 13611 | + 24.9%
| 7.6 GB | 4 | 32683 | 33108 |
| 7.6 GB | 8 | 33968 | 34712 |
| 7.6 GB | 16 | 32287 | 32895 |
| 7.6 GB | 20 | 27770 | 31689 | + 14.1%
| 7.6 GB | 30 | 26739 | 29003 |
| 7.6 GB | 40 | 24901 | 26683 |
| 7.6 GB | 50 | 17115 | 25925 | + 51.5%
------------------------------------------------------
(Davidlohr also has one additional patch which further improves
throughput, though I will ask him to send it directly to you as I have
suggested some minor changes)."
* emailed patches from Michel Lespinasse <walken@google.com>:
rwsem: no need for explicit signed longs
x86 rwsem: avoid taking slow path when stealing write lock
rwsem: do not block readers at head of queue if other readers are active
rwsem: implement support for write lock stealing on the fastpath
rwsem: simplify __rwsem_do_wake
rwsem: skip initial trylock in rwsem_down_write_failed
rwsem: avoid taking wait_lock in rwsem_down_write_failed
rwsem: use cmpxchg for trying to steal write lock
rwsem: more agressive lock stealing in rwsem_down_write_failed
rwsem: simplify rwsem_down_write_failed
rwsem: simplify rwsem_down_read_failed
rwsem: move rwsem_down_failed_common code into rwsem_down_{read,write}_failed
rwsem: shorter spinlocked section in rwsem_down_failed_common()
rwsem: make the waiter type an enumeration rather than a bitmask
The core code expects the arch idle code to return with interrupts
enabled. The conversion missed two x86 cases which fail to do that.
Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305021557030.3972@ionos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
modify __down_write[_nested] and __down_write_trylock to grab the write
lock whenever the active count is 0, even if there are queued waiters
(they must be writers pending wakeup, since the active count is 0).
Note that this is an optimization only; architectures without this
optimization will still work fine:
- __down_write() would take the slow path which would take the wait_lock
and then try stealing the lock (as in the spinlocked rwsem implementation)
- __down_write_trylock() would fail, but callers must be ready to deal
with that - since there are some writers pending wakeup, they could
have raced with us and obtained the lock before we steal it.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They are important structures and it is not clear at first
look what they are for.
The xen_vcpu is a pointer. By default it points to the shared_info
structure (at the CPU offset location). However if the
VCPUOP_register_vcpu_info hypercall is implemented we can make the
xen_vcpu pointer point to a per-CPU location.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
[v1: Added comments from Ian Campbell]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The updates are mostly about the x86 IOMMUs this time. Exceptions are
the groundwork for the PAMU IOMMU from Freescale (for a PPC platform)
and an extension to the IOMMU group interface. On the x86 side this
includes a workaround for VT-d to disable interrupt remapping on broken
chipsets. On the AMD-Vi side the most important new feature is a kernel
command-line interface to override broken information in IVRS ACPI
tables and get interrupt remapping working this way. Besides that there
are small fixes all over the place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJRh2vAAAoJECvwRC2XARrjbjkP/jzKzeffybUpQsIJF8rs/IEt
hSwqpGLr6WR5FdneEH9fiBIp4pyMDXmuAb/2ZNgB+DgPN3xgqmWVo4WLk7pMo3BS
/xIz/lu7hIX3AtKt807pL9+rPdhGYEJ43Vmr4bW9x0l1kuNXy6fmMLcN5FaPKjV4
p4hY4jOstEgtYQw4wi39/9b4FsYoipZizkOUSdtCzWwTv7jOHH7/Wra8iZyzL6Je
1VlF/efp0ytTcwLdHOfGwPCIlZrQRtQCM4SqdAUG9bOL3ARR9Yu/0iW1295nbLzo
CQX5CfKePvo/fGxki1jcBi+UCyxYKPosB5kCxmh4MAxCg/VzzMsaME/A73tLJa6W
Y29bbjwPoBPMq03HX8S9R5QWY8HpFujUUp+J4TXcKuTgYEV28WfLu1uaeKD716nM
LoXUojov7Cj8ZQZnhyu5l+XNaephBZLfw/8bM6bAxhlKXwAjmLiS5Z+srPl1GJee
5GCV+L94JifHLZaREWh3JFsh9O3W7Wno2++c4JU32uCWJHXH7tMgs2P8n5AY9rnT
Km1a9y6w2MF3Gg9j4y6u75m0XnFTNzYjeJMUtqVlwVhNHhgaXfuIWY63xOQCLJs1
ThTHOjoh0VqONGobR/ywn+0ouo9X07DnWpluyFd+zY3XK0UE0NOu9XMr4i6TWxOf
mlzWoEKxtw36XGHB/FtQ
=MVc/
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"The updates are mostly about the x86 IOMMUs this time.
Exceptions are the groundwork for the PAMU IOMMU from Freescale (for a
PPC platform) and an extension to the IOMMU group interface.
On the x86 side this includes a workaround for VT-d to disable
interrupt remapping on broken chipsets. On the AMD-Vi side the most
important new feature is a kernel command-line interface to override
broken information in IVRS ACPI tables and get interrupt remapping
working this way.
Besides that there are small fixes all over the place."
* tag 'iommu-updates-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (24 commits)
iommu/tegra: Fix printk formats for dma_addr_t
iommu: Add a function to find an iommu group by id
iommu/vt-d: Remove warning for HPET scope type
iommu: Move swap_pci_ref function to drivers/iommu/pci.h.
iommu/vt-d: Disable translation if already enabled
iommu/amd: fix error return code in early_amd_iommu_init()
iommu/AMD: Per-thread IOMMU Interrupt Handling
iommu: Include linux/err.h
iommu/amd: Workaround for ERBT1312
iommu/amd: Document ivrs_ioapic and ivrs_hpet parameters
iommu/amd: Don't report firmware bugs with cmd-line ivrs overrides
iommu/amd: Add ioapic and hpet ivrs override
iommu/amd: Add early maps for ioapic and hpet
iommu/amd: Extend IVRS special device data structure
iommu/amd: Move add_special_device() to __init
iommu: Fix compile warnings with forward declarations
iommu/amd: Properly initialize irq-table lock
iommu/amd: Use AMD specific data structure for irq remapping
iommu/amd: Remove map_sg_no_iommu()
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets
...
If a user did:
echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online
we would (this a build with DEBUG enabled) get to:
smpboot: ++++++++++++++++++++=_---CPU UP 1
.. snip..
smpboot: Stack at about ffff880074c0ff44
smpboot: CPU1: has booted.
and hang. The RCU mechanism would kick in an try to IPI the CPU1
but the IPIs (and all other interrupts) would never arrive at the
CPU1. At first glance at least. A bit digging in the hypervisor
trace shows that (using xenanalyze):
[vla] d4v1 vec 243 injecting
0.043163027 --|x d4v1 intr_window vec 243 src 5(vector) intr f3
] 0.043163639 --|x d4v1 vmentry cycles 1468
] 0.043164913 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254
0.043164913 --|x d4v1 inj_virq vec 243 real
[vla] d4v1 vec 243 injecting
0.043164913 --|x d4v1 intr_window vec 243 src 5(vector) intr f3
] 0.043165526 --|x d4v1 vmentry cycles 1472
] 0.043166800 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254
0.043166800 --|x d4v1 inj_virq vec 243 real
[vla] d4v1 vec 243 injecting
there is a pending event (subsequent debugging shows it is the IPI
from the VCPU0 when smpboot.c on VCPU1 has done
"set_cpu_online(smp_processor_id(), true)") and the guest VCPU1 is
interrupted with the callback IPI (0xf3 aka 243) which ends up calling
__xen_evtchn_do_upcall.
The __xen_evtchn_do_upcall seems to do *something* but not acknowledge
the pending events. And the moment the guest does a 'cli' (that is the
ffffffff81673254 in the log above) the hypervisor is invoked again to
inject the IPI (0xf3) to tell the guest it has pending interrupts.
This repeats itself forever.
The culprit was the per_cpu(xen_vcpu, cpu) pointer. At the bootup
we set each per_cpu(xen_vcpu, cpu) to point to the
shared_info->vcpu_info[vcpu] but later on use the VCPUOP_register_vcpu_info
to register per-CPU structures (xen_vcpu_setup).
This is used to allow events for more than 32 VCPUs and for performance
optimizations reasons.
When the user performs the VCPU hotplug we end up calling the
the xen_vcpu_setup once more. We make the hypercall which returns
-EINVAL as it does not allow multiple registration calls (and
already has re-assigned where the events are being set). We pick
the fallback case and set per_cpu(xen_vcpu, cpu) to point to the
shared_info->vcpu_info[vcpu] (which is a good fallback during bootup).
However the hypervisor is still setting events in the register
per-cpu structure (per_cpu(xen_vcpu_info, cpu)).
As such when the events are set by the hypervisor (such as timer one),
and when we iterate in __xen_evtchn_do_upcall we end up reading stale
events from the shared_info->vcpu_info[vcpu] instead of the
per_cpu(xen_vcpu_info, cpu) structures. Hence we never acknowledge the
events that the hypervisor has set and the hypervisor keeps on reminding
us to ack the events which we never do.
The fix is simple. Don't on the second time when xen_vcpu_setup is
called over-write the per_cpu(xen_vcpu, cpu) if it points to
per_cpu(xen_vcpu_info).
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Pull kvm updates from Gleb Natapov:
"Highlights of the updates are:
general:
- new emulated device API
- legacy device assignment is now optional
- irqfd interface is more generic and can be shared between arches
x86:
- VMCS shadow support and other nested VMX improvements
- APIC virtualization and Posted Interrupt hardware support
- Optimize mmio spte zapping
ppc:
- BookE: in-kernel MPIC emulation with irqfd support
- Book3S: in-kernel XICS emulation (incomplete)
- Book3S: HV: migration fixes
- BookE: more debug support preparation
- BookE: e6500 support
ARM:
- reworking of Hyp idmaps
s390:
- ioeventfd for virtio-ccw
And many other bug fixes, cleanups and improvements"
* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
kvm: Add compat_ioctl for device control API
KVM: x86: Account for failing enable_irq_window for NMI window request
KVM: PPC: Book3S: Add API for in-kernel XICS emulation
kvm/ppc/mpic: fix missing unlock in set_base_addr()
kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
kvm/ppc/mpic: remove users
kvm/ppc/mpic: fix mmio region lists when multiple guests used
kvm/ppc/mpic: remove default routes from documentation
kvm: KVM_CAP_IOMMU only available with device assignment
ARM: KVM: iterate over all CPUs for CPU compatibility check
KVM: ARM: Fix spelling in error message
ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
KVM: ARM: Fix API documentation for ONE_REG encoding
ARM: KVM: promote vfp_host pointer to generic host cpu context
ARM: KVM: add architecture specific hook for capabilities
ARM: KVM: perform HYP initilization for hotplugged CPUs
ARM: KVM: switch to a dual-step HYP init code
ARM: KVM: rework HYP page table freeing
ARM: KVM: enforce maximum size for identity mapped code
ARM: KVM: move to a KVM provided HYP idmap
...
Pull perf fixes from Ingo Molnar:
"Misc fixes plus a small hw-enablement patch for Intel IB model 58
uncore events"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNEL
perf/x86/intel/lbr: Fix LBR filter
perf/x86: Blacklist all MEM_*_RETIRED events for Ivy Bridge
perf: Fix vmalloc ring buffer pages handling
perf/x86/intel: Fix unintended variable name reuse
perf/x86/intel: Add support for IvyBridge model 58 Uncore
perf/x86/intel: Fix typo in perf_event_intel_uncore.c
x86: Eliminate irq_mis_count counted in arch_irq_stat
The LBR 'from' adddress is under full userspace control; ensure
we validate it before reading from it.
Note: is_module_text_address() can potentially be quite
expensive; for those running into that with high overhead
in modules optimize it using an RCU backed rb-tree.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20130503121256.158211806@chello.nl
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/n/tip-mk8i82ffzax01cnqo829iy1q@git.kernel.org
With VMX, enable_irq_window can now return -EBUSY, in which case an
immediate exit shall be requested before entering the guest. Account for
this also in enable_nmi_window which uses enable_irq_window in absence
of vnmi support, e.g.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Commit 49cb25e929 x86: 'get rid of pt_regs argument in vm86/vm86old'
got rid of the pt_regs stub for sys_vm86old and sys_vm86. The functions
were, however, not changed to use the calling convention for syscalls.
[AV: killed asmlinkage_protect() - it's done automatically now]
Reported-and-tested-by: Hans de Bruin <jmdebruin@xmsnet.nl>
Cc: stable@vger.kernel.org
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull crypto update from Herbert Xu:
- XTS mode optimisation for twofish/cast6/camellia/aes on x86
- AVX2/x86_64 implementation for blowfish/twofish/serpent/camellia
- SSSE3/AVX/AVX2 optimisations for sha256/sha512
- Added driver for SAHARA2 crypto accelerator
- Fix for GMAC when used in non-IPsec secnarios
- Added generic CMAC implementation (including IPsec glue)
- IP update for crypto/atmel
- Support for more than one device in hwrng/timeriomem
- Added Broadcom BCM2835 RNG driver
- Misc fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (59 commits)
crypto: caam - fix job ring cleanup code
crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher
crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher
crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher
crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher
crypto: tcrypt - add async cipher speed tests for blowfish
crypto: testmgr - extend camellia test-vectors for camellia-aesni/avx2
crypto: aesni_intel - fix Kconfig problem with CRYPTO_GLUE_HELPER_X86
crypto: aesni_intel - add more optimized XTS mode for x86-64
crypto: x86/camellia-aesni-avx - add more optimized XTS code
crypto: cast6-avx: use new optimized XTS code
crypto: x86/twofish-avx - use optimized XTS code
crypto: x86 - add more optimized XTS-mode for serpent-avx
xfrm: add rfc4494 AES-CMAC-96 support
crypto: add CMAC support to CryptoAPI
crypto: testmgr - add empty test vectors for null ciphers
crypto: testmgr - add AES GMAC test vectors
crypto: gcm - fix rfc4543 to handle async crypto correctly
crypto: gcm - make GMAC work when dst and src are different
hwrng: timeriomem - added devicetree hooks
...
Pull x86 fixes from Peter Anvin:
"Two regression fixes:
1. On 64 bits, we would set NX on non-NX-capable hardware (very rare
in 64-bit land, but a nonzero subset.)
2. Fix suspend/resume across kernel versions"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64, init: Do not set NX bits on non-NX capable hardware
x86, gdt, hibernate: Store/load GDT for hibernate path.
Linus Torvalds