A previous fix ("tls: Fix write space handling") assumed that
user space application gets informed about the socket send buffer
availability when tls_push_sg() gets called. Inside tls_push_sg(), in
case do_tcp_sendpages() returns 0, the function returns without calling
ctx->sk_write_space. Further, the new function tls_sw_write_space()
did not invoke ctx->sk_write_space. This leads to situation that user
space application encounters a lockup always waiting for socket send
buffer to become available.
Rather than call ctx->sk_write_space from tls_push_sg(), it should be
called from tls_write_space. So whenever tcp stack invokes
sk->sk_write_space after freeing socket send buffer, we always declare
the same to user space by the way of invoking ctx->sk_write_space.
Fixes: 7463d3a2db ("tls: Fix write space handling")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is confusing to directly use return value of netlink_send()/
netlink_unicast() as the return value of *notify*, as it may be not
error at all.
Example: in tc_del_tfilter(), after calling tfilter_del_notify(), it will
goto errout if (err). However, the netlink_send()/netlink_unicast() will
return positive value even for successful case. So it may not call
tcf_chain_tp_remove() and so on to clean up the resource, as a result,
resource is leaked.
It may be easier to only check the return value of tfilter_del_nofiy(),
but it is more clean to correct all related functions.
Co-developed-by: Zengmo Gao <gaozengmo@jd.com>
Signed-off-by: Zhike Wang <wangzhike@jd.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It has been observed that tx queue may stall while downloading
from certain web sites (example www.speedtest.net)
The cause has been tracked down to a corner case where
the tx interrupt vector was disabled automatically, but
was not re enabled later.
The lan743x has two mechanisms to enable/disable individual
interrupts. Interrupts can be enabled/disabled by individual
source, and they can also be enabled/disabled by individual
vector which has been mapped to the source. Both must be
enabled for interrupts to work properly.
The TX code path, primarily uses the interrupt enable/disable of
the TX source bit, while leaving the vector enabled all the time.
However, while investigating this issue it was noticed that
the driver requested the use of the vector auto clear feature.
The test above revealed a case where the vector enable was
cleared unintentionally.
This patch fixes the issue by deleting the lines that request
the vector auto clear feature to be used.
Fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan says:
====================
mlx4_core misc fixes
This patchset by Jack contains misc fixes to the mlx4 Core driver.
Patch 1 fixes a use-after-free situation by marking (nullifying) the pointer,
please queue for -stable >= v4.0.
Patch 2 adds a missing lock acquire and release in SRIOV command interface,
please queue for -stable >= v4.9.
Patch 3 avoids calling roundup_pow_of_two when argument is zero,
please queue for -stable >= v3.3.
Series generated against net commit:
a3b1933d34 Merge tag 'mlx5-fixes-2019-03-11' of
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper)
ultimately depends on function roundup_pow_of_two.
If the amount of memory required by the QP is less than one page,
roundup_pow_of_two is called with argument zero. In this case, the
roundup_pow_of_two result is undefined.
Calling roundup_pow_of_two with a zero argument resulted in the
following stack trace:
UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1
Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015
Call Trace:
dump_stack+0x9a/0xeb
ubsan_epilogue+0x9/0x7c
__ubsan_handle_shift_out_of_bounds+0x254/0x29d
? __ubsan_handle_load_invalid_value+0x180/0x180
? debug_show_all_locks+0x310/0x310
? sched_clock+0x5/0x10
? sched_clock+0x5/0x10
? sched_clock_cpu+0x18/0x260
? find_held_lock+0x35/0x1e0
? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core]
mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core]
Fix this by explicitly testing for zero, and returning one if the
argument is zero (assuming that the next higher power of 2 in this case
should be one).
Fixes: c82e9aa0a8 ("mlx4_core: resource tracking for HCA resources used by guests")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In procedures mlx4_cmd_use_events() and mlx4_cmd_use_polling(), we need to
guarantee that there are no FW commands in progress on the comm channel
(for VFs) or wrapped FW commands (on the PF) when SRIOV is active.
We do this by also taking the slave_cmd_mutex when SRIOV is active.
This is especially important when switching from event to polling, since we
free the command-context array during the switch. If there are FW commands
in progress (e.g., waiting for a completion event), the completion event
handler will access freed memory.
Since the decision to use comm_wait or comm_poll is taken before grabbing
the event_sem/poll_sem in mlx4_comm_cmd_wait/poll, we must take the
slave_cmd_mutex as well (to guarantee that the decision to use events or
polling and the call to the appropriate cmd function are atomic).
Fixes: a7e1f04905 ("net/mlx4_core: Fix deadlock when switching between polling and event fw commands")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of unloading a device, the driver switches from
FW command event mode to FW command polling mode.
Part of switching over to polling mode is freeing the command context array
memory (unfortunately, currently, without NULLing the command context array
pointer).
The reset flow calls "complete" to complete all outstanding fw commands
(if we are in event mode). The check for event vs. polling mode here
is to test if the command context array pointer is NULL.
If the reset flow is activated after the switch to polling mode, it will
attempt (incorrectly) to complete all the commands in the context array --
because the pointer was not NULLed when the driver switched over to polling
mode.
As a result, we have a use-after-free situation, which results in a
kernel crash.
For example:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: netconsole nfsv3 nfs_acl nfs lockd grace ...
CPU: 2 PID: 940 Comm: kworker/2:3 Kdump: loaded Not tainted 3.10.0-862.el7.x86_64 #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016
Workqueue: events hv_eject_device_work [pci_hyperv]
task: ffff8d1734ca0fd0 ti: ffff8d17354bc000 task.ti: ffff8d17354bc000
RIP: 0010:[<ffffffff876c4a8e>] [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90
RSP: 0018:ffff8d17354bfa38 EFLAGS: 00010082
RAX: 0000000000000000 RBX: ffff8d17362d42c8 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8d17362d42c8
RBP: ffff8d17354bfa70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000298 R11: ffff8d173610e000 R12: ffff8d17362d42d0
R13: 0000000000000246 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8d1802680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000f16d8000 CR4: 00000000001406e0
Call Trace:
[<ffffffff876c7adc>] complete+0x3c/0x50
[<ffffffffc04242f0>] mlx4_cmd_wake_completions+0x70/0x90 [mlx4_core]
[<ffffffffc041e7b1>] mlx4_enter_error_state+0xe1/0x380 [mlx4_core]
[<ffffffffc041fa4b>] mlx4_comm_cmd+0x29b/0x360 [mlx4_core]
[<ffffffffc041ff51>] __mlx4_cmd+0x441/0x920 [mlx4_core]
[<ffffffff877f62b1>] ? __slab_free+0x81/0x2f0
[<ffffffff87951384>] ? __radix_tree_lookup+0x84/0xf0
[<ffffffffc043a8eb>] mlx4_free_mtt_range+0x5b/0xb0 [mlx4_core]
[<ffffffffc043a957>] mlx4_mtt_cleanup+0x17/0x20 [mlx4_core]
[<ffffffffc04272c7>] mlx4_free_eq+0xa7/0x1c0 [mlx4_core]
[<ffffffffc042803e>] mlx4_cleanup_eq_table+0xde/0x130 [mlx4_core]
[<ffffffffc0433e08>] mlx4_unload_one+0x118/0x300 [mlx4_core]
[<ffffffffc0434191>] mlx4_remove_one+0x91/0x1f0 [mlx4_core]
The fix is to set the command context array pointer to NULL after freeing
the array.
Fixes: f5aef5aa35 ("net/mlx4_core: Activate reset flow upon fatal command cases")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Various fixes
Patch #1 fixes the recently introduced QSFP thermal zones to correctly
work with split ports, where several ports are mapped to the same
module.
Patch #2 initializes the base MAC in the minimal driver. The driver is
using the base MAC as its parent ID and without initializing it, it is
reported as all zeroes to user space.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently base_mac is not initialized which causes wrong reporting of
zeroed parent_id to userspace. Fix this by initializing base_mac
properly.
Fixes: c100e47caa ("mlxsw: minimal: Add ethtool support")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify during thermal initialization if QSFP module's entry is already
configured in order to prevent duplication.
Such scenario could happen in case two switch drivers (PCI and I2C
based) coexist and if after boot, splitting configuration is applied
for some ports and then I2C based driver is re-probed.
In such case after reboot same QSFP module, associated with split will
be discovered by I2C based driver few times, and it will cause a crash.
It could happen for example on system equipped with BMC (Baseboard
Management Controller), running I2C based driver, when the next steps
are performed:
- System boot
- Host side configures port spilt.
- BMC side is rebooted.
Fixes: 6a79507cfe ("mlxsw: core: Extend thermal module with per QSFP module thermal zones")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_get_phy_mode may fail and return a negative error code;
the fix checks the return value of of_get_phy_mode and
returns -EINVAL of it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_get_phy_mode may fail and return a negative error code;
the fix checks the return value of of_get_phy_mode and
returns NULL of it fails.
Fixes: b356e978e9 ("sh_eth: add device tree support")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case ioremap fails, the fix releases resources and returns
to avoid NULL pointer dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case ioremap fails, the fix releases the pcmcia window and
returns -ENOMEM to avoid the NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case create_singlethread_workqueue fails, the fix returns
-ENOMEM to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case ioremap fails, the fix releases resources and returns.
The following printk is for logging purpose and thus is
preserved.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add documentation for a new optional property local-mac-address which
is described in ethernet.txt.
Signed-off-by: xiaofeis <xiaofeis@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case kzalloc fails, the fix releases resources and returns
NOTIFY_BAD to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case alloc_ordered_workqueue fails, the fix returns
-ENOMEM to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree:
1) Fix list corruption in device notifier in the masquerade
infrastructure, from Florian Westphal.
2) Fix double-free of sets and use-after-free when deleting elements.
3) Don't bogusly return EBUSY when removing a set after flush command.
4) Use-after-free in dynamically allocate operations.
5) Don't report a new ruleset generation to userspace if transaction
list is empty, this invalidates the userspace cache innecessarily.
From Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit eeea10b83a ("tcp: add
tcp_v4_fill_cb()/tcp_v4_restore_cb()"), tcp_vX_fill_cb is only called
after tcp_filter(). That means, TCP_SKB_CB(skb)->end_seq still points to
the IP-part of the cb.
We thus should not mock with it, as this can trigger bugs (thanks
syzkaller):
[ 12.349396] ==================================================================
[ 12.350188] BUG: KASAN: slab-out-of-bounds in ip6_datagram_recv_specific_ctl+0x19b3/0x1a20
[ 12.351035] Read of size 1 at addr ffff88006adbc208 by task test_ip6_datagr/1799
Setting end_seq is actually no more necessary in tcp_filter as it gets
initialized later on in tcp_vX_fill_cb.
Cc: Eric Dumazet <edumazet@google.com>
Fixes: eeea10b83a ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case alloc_ordered_workqueue fails, the fix reports the error
and returns -ENOMEM.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case octeon_alloc_soft_command fails, the fix reports the
error and returns to avoid NULL pointer dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
It has been noticed that running the speed test at
www.speedtest.net occasionally causes a kernel panic.
Investigation revealed that under this test RX buffer allocation
sometimes fails and returns NULL. But the lan743x driver did
not handle this case.
This patch fixes this issue by attempting to allocate a buffer
before sending the new rx packet to the OS. If the allocation
fails then the new rx packet is dropped and the existing buffer
is reused in the DMA ring.
Updates for v2:
Additional 2 locations where allocation was not checked,
has been changed to reuse existing buffer.
Fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running 'nft flush ruleset' while no rules exist, we will increment
the generation counter and announce a new genid to userspace, yet
nothing had changed in the first place.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In case octeon_alloc_soft_command fails, the fix reports the
error and returns to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we try to set VFs rate on a VF (not PF) net device, the kernel
will be crash. The commands are show as below:
$ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs
$ ip link set $MLX_VF0 vf 0 max_tx_rate 2 min_tx_rate 1
If not applied the first patch ("net/mlx5: Avoid panic when setting
vport mac, getting vport config"), the command:
$ ip link set $MLX_VF0 vf 0 rate 100
can also crash the kernel.
[ 1650.006388] RIP: 0010:mlx5_eswitch_set_vport_rate+0x1f/0x260 [mlx5_core]
[ 1650.007092] do_setlink+0x982/0xd20
[ 1650.007129] __rtnl_newlink+0x528/0x7d0
[ 1650.007374] rtnl_newlink+0x43/0x60
[ 1650.007407] rtnetlink_rcv_msg+0x2a2/0x320
[ 1650.007484] netlink_rcv_skb+0xcb/0x100
[ 1650.007519] netlink_unicast+0x17f/0x230
[ 1650.007554] netlink_sendmsg+0x2d2/0x3d0
[ 1650.007592] sock_sendmsg+0x36/0x50
[ 1650.007625] ___sys_sendmsg+0x280/0x2a0
[ 1650.007963] __sys_sendmsg+0x58/0xa0
[ 1650.007998] do_syscall_64+0x5b/0x180
[ 1650.009438] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: c9497c9890 ("net/mlx5: Add support for setting VF min rate")
Cc: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
If we try to set VFs mac address on a VF (not PF) net device,
the kernel will be crash. The commands are show as below:
$ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs
$ ip link set $MLX_VF0 vf 0 mac 00:11:22:33:44:00
[exception RIP: mlx5_eswitch_set_vport_mac+41]
[ffffb8b7079e3688] do_setlink at ffffffff8f67f85b
[ffffb8b7079e37a8] __rtnl_newlink at ffffffff8f683778
[ffffb8b7079e3b68] rtnl_newlink at ffffffff8f683a63
[ffffb8b7079e3b90] rtnetlink_rcv_msg at ffffffff8f67d812
[ffffb8b7079e3c10] netlink_rcv_skb at ffffffff8f6b88ab
[ffffb8b7079e3c60] netlink_unicast at ffffffff8f6b808f
[ffffb8b7079e3ca0] netlink_sendmsg at ffffffff8f6b8412
[ffffb8b7079e3d18] sock_sendmsg at ffffffff8f6452f6
[ffffb8b7079e3d30] ___sys_sendmsg at ffffffff8f645860
[ffffb8b7079e3eb0] __sys_sendmsg at ffffffff8f647a38
[ffffb8b7079e3f38] do_syscall_64 at ffffffff8f00401b
[ffffb8b7079e3f50] entry_SYSCALL_64_after_hwframe at ffffffff8f80008c
and
[exception RIP: mlx5_eswitch_get_vport_config+12]
[ffffa70607e57678] mlx5e_get_vf_config at ffffffffc03c7f8f [mlx5_core]
[ffffa70607e57688] do_setlink at ffffffffbc67fa59
[ffffa70607e577a8] __rtnl_newlink at ffffffffbc683778
[ffffa70607e57b68] rtnl_newlink at ffffffffbc683a63
[ffffa70607e57b90] rtnetlink_rcv_msg at ffffffffbc67d812
[ffffa70607e57c10] netlink_rcv_skb at ffffffffbc6b88ab
[ffffa70607e57c60] netlink_unicast at ffffffffbc6b808f
[ffffa70607e57ca0] netlink_sendmsg at ffffffffbc6b8412
[ffffa70607e57d18] sock_sendmsg at ffffffffbc6452f6
[ffffa70607e57d30] ___sys_sendmsg at ffffffffbc645860
[ffffa70607e57eb0] __sys_sendmsg at ffffffffbc647a38
[ffffa70607e57f38] do_syscall_64 at ffffffffbc00401b
[ffffa70607e57f50] entry_SYSCALL_64_after_hwframe at ffffffffbc80008c
Fixes: a8d70a054a ("net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager")
Cc: Eli Cohen <eli@mellanox.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In case number of channels is changed while interface is down,
RSS indirection table is mistakenly not modified accordingly,
causing access to out-of-range non-existing object.
Fix by updating the RSS indireciton table also in the early
return flow of interface down.
Fixes: fb35c534b7 ("net/mlx5e: Fix NULL pointer derefernce in set channels error flow")
Fixes: bbeb53b8b2 ("net/mlx5e: Move RSS params to a dedicated struct")
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Tested-by: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Update the RX checksum only if the feature is enabled.
Fixes: 9d6bd752c6 ("net/mlx5e: IPoIB, RX handler")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently, we fail to retrieve the PF number in some cases (e.g
single ported cards, lag capability), this further results in a
call trace issued by the rtnetlink code, since the error value
is not -EOPNOTSUPP. Change the implementation to be independent
from the lag code and function properly on both two ports and
single ported cards.
Call Trace:
[ 194.525057] mlx5_core 0000:82:00.0: mlx5_lag_get_pf_num:605:(pid 837): no lag device, can't get pf num
[ 194.525804] WARNING: CPU: 7 PID: 837 at net/core/rtnetlink.c:3457 rtmsg_ifinfo_build_skb+0x131/0x160
[ 194.529952] CPU: 7 PID: 837 Comm: kworker/7:3 Tainted: G W O 5.0.0-rc7+ #3
[ 194.531307] Workqueue: events linkwatch_event
[ 194.531697] RIP: 0010:rtmsg_ifinfo_build_skb+0x131/0x160
[ 194.545007] Call Trace:
[ 194.545406] rtmsg_ifinfo_event.part.29+0x1b/0xb0
[ 194.545810] rtmsg_ifinfo+0x51/0x80
[ 194.546209] netdev_state_change+0xc7/0x110
[ 194.546608] ? dev_valid_name+0x1b0/0x1b0
[ 194.547010] ? __local_bh_enable_ip+0xef/0x1d0
[ 194.547411] ? lockdep_hardirqs_on+0x3ea/0x560
[ 194.547811] ? linkwatch_do_dev+0x9b/0x100
[ 194.548207] linkwatch_do_dev+0x9b/0x100
[ 194.548605] __linkwatch_run_queue+0x244/0x430
[ 194.549014] ? linkwatch_schedule_work+0x100/0x100
[ 194.549412] ? lock_acquire+0x10f/0x2d0
[ 194.549816] linkwatch_event+0x3f/0x50
[ 194.550212] process_one_work+0x7d3/0x1460
Fixes: c12ecc2305 ("net/mlx5e: Move to use common phys port names for vport representors")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
With commit a18e879d4e ("net/mlx5e: Annul encap action ordering
requirement") and a use-case of e-switch remote mirroring, the
incremental/stepped FTE removal process done by the fs core got us to
illegal transient states and FW errors:
SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad
parameter(0x3), syndrome (0x9c2e40)
To avoid that and improve FTE removal performance, aggregate the FTE's
updates that should be applied. Remove the FTE if it is empty, or apply
one FW update command with the aggregated updates.
Fixes: a18e879d4e ("net/mlx5e: Annul encap action ordering requirement")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add a locked flag to the node removal functions to signal if the
parent is already locked from the caller function or not as a pre-step
towards outside lock. Currently always use false with no functional
change.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add modify FTE helper function and use it when deleting a rule, as a
pre-step towards consolidated FTE modification, with no functional
change.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There might be a condition where the fte found is not active yet. In
this case we should not use it, but continue to search for another, or
allocate a new one.
Fixes: bd71b08ec2 ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Referencing the __kernel_long_t type caused some user space applications
to stop compiling when they had not already included linux/posix_types.h,
e.g.
s/multicast.c -o ext/sockets/multicast.lo
In file included from /builddir/build/BUILD/php-7.3.3/main/php.h:468,
from /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c:27:
/builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c: In function 'zm_startup_sockets':
/builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c:776:40: error: '__kernel_long_t' undeclared (first use in this function)
776 | REGISTER_LONG_CONSTANT("SO_SNDTIMEO", SO_SNDTIMEO, CONST_CS | CONST_PERSISTENT);
It is safe to include that header here, since it only contains kernel
internal types that do not conflict with other user space types.
It's still possible that some related build failures remain, but those
are likely to be for code that is not already y2038 safe.
Reported-by: Laura Abbott <labbott@redhat.com>
Fixes: a9beb86ae6 ("sock: Add SO_RCVTIMEO_NEW and SO_SNDTIMEO_NEW")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set deletion after flush coming in the same batch results in EBUSY. Add
set use counter to track the number of references to this set from
rules. We cannot rely on the list of bindings for this since such list
is still populated from the preparation phase.
Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Same reasons than the ones explained in commit 4179cb5a4c
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")
netif_rx() or gro_cells_receive() must be called under a strict contract.
At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.
A similar protocol is used for gro_cells infrastructure, as
gro_cells_destroy() will be called only after a full rcu
grace period is observed after IFF_UP has been cleared.
Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP
Virtual drivers do not have this guarantee, and must
therefore make the check themselves.
Otherwise we risk use-after-free and/or crashes.
Fixes: d342894c5d ("vxlan: virtual extensible lan")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case ioremap fails, the fix returns -ENOMEM to avoid NULL
pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit bfcb79fca1
("PCI/ERR: Run error recovery callbacks for all affected devices")
affected the non-fatal error recovery logic for the HNS and RDMA devices.
This is because each HNS PF under PCIe bus receive callbacks
from the AER driver when an error is reported for one of the PF.
This causes unwanted PF resets because
the HNS decides which PF to reset based on the reset type set.
The HNS error handling code sets the reset type based on the hw error
type detected.
This patch provides fix for the above issue for the recovery of
the hw errors in the HNS and RDMA devices.
This patch needs backporting to the kernel v5.0+
Fixes: 332fbf5765 ("net: hns3: add handling of hw ras errors using new set of commands")
Reported-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Eric Dumazet said, "We do not have a way to tell if the req was ever
inserted in a hash table, so better play safe.".
Let's remove this comment, so that nobody will be tempted to drop the
WARN_ON_ONCE() line.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building with -Wsometimes-uninitialized, Clang warns:
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable
'ns' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c:111:2: error: variable
'ns' is used uninitialized whenever '&&' condition is false
[-Werror,-Wsometimes-uninitialized]
Clang is concerned with the use of stmmac_do_void_callback (which
stmmac_get_systime wraps), as it may fail to initialize these values if
the if condition was ever false (meaning the callback doesn't exist).
It's not wrong because the callback is what initializes ns. While it's
unlikely that the callback is going to disappear at some point and make
that condition false, we can easily avoid this warning by zero
initializing the variable.
Link: https://github.com/ClangBuiltLinux/linux/issues/384
Fixes: df10317085 ("net: stmmac: Avoid sometimes uninitialized Clang warnings")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vakul Garg