Commit Graph

16 Commits

Author SHA1 Message Date
Daniel Kurtz 626af86112 Input: atmel_mxt_ts - use snprintf for sysfs attribute show method
Sysfs attribute show methods are always passed a buffer of length
PAGE_SIZE.  To keep from overwriting this buffer and causing havoc, use
snprintf() to guarantee we never write more than the buffer can hold.

In addition, at least for my touchscreen, the number and size of objects
was far too big to fit in a single 4K page.  Therefore, this patch also
trims some redundant framing text to leave more room for actual data.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06 19:41:52 -07:00
Yufeng Shen 28ac293363 Input: atmel_mxt_ts - report pressure information from the driver
Atmel mxt1386 touch controller has the touch pressure information so
let's report it to the user space.

[dtor@mail.ru: added ABS_RESSURE reporting for ST emulation.]

Signed-off-by: Yufeng Shen <miletus@chromium.org>
Acked-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-16 23:31:51 -07:00
Iiro Valkonen a93d4f2d02 Input: atmel_mxt_ts - handle objects with multiple instances correctly
Handle the objects with multiple instances correctly when the configuration
data is loaded.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 03:19:20 -07:00
Iiro Valkonen 81c88a711a Input: atmel_mxt_ts - update object list
Update the object list to include new objects, and add unique identifiers
so we can distinguish between old & new generation of the same object.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-04 03:19:11 -07:00
Joonyoung Shim 8b86c1c28f Input: atmel_mxt_ts - convert to MT protocol B
Atmel touchscreen chips can use MT protocol B because they can assign
unique id to ABS_MT_TRACKING_ID from finger id provided by hardware.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12 23:34:21 -07:00
Iiro Valkonen 08960a070a Input: atmel_mxt_ts - make CHG line high after enabling interrupts
Make the CHG line (interrupt line) go high after the interrupts have been
enabled to make sure we don't miss the falling edge.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12 23:34:16 -07:00
Joonyoung Shim 910d805130 Input: atmel_mxt_ts - support 12bit resolution
Atmel touchscreen chip can support 12bit resolution and this patch
modifies to get maximum x and y size from platform data.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12 23:34:11 -07:00
Joonyoung Shim 4c75de32eb Input: atmel_mxt_ts - add objects of mXT1386 chip
Atmel mXT1386 chip is operated by atmel_mxt_ts driver and it has some
different objects.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-14 21:42:46 -07:00
Joonyoung Shim 979a72dad9 Input: atmel_mxt_ts - remove firmware version check
Atmel touchscreen chips have different firmware version with each chip,
so we cannot distinguish attribute of chip by firmware version.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-14 21:42:06 -07:00
Iiro Valkonen 0d3c07378b Input: atmel_mxt_ts - remove matrix size check
The mxt_check_matrix_size() is currently setting the CTE mode to match
xline/yline information that is in the platform data, but it does not
take into account for example the fact that we could have a key array
in use too (key array would use some x/y lines as well).

It would be better to simply rely on the configuration data, and make
sure that the CTE mode set in there matches the touch object (touchscreen,
key array, proximity) configuration (which are set in the config data too).

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-25 09:27:00 -08:00
Iiro Valkonen 919ed895f0 Input: atmel_mxt_ts - allow board code to specify IRQ flags
Different board have different requirements/setups so let's be more
flexible.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21 01:02:34 -08:00
Iiro Valkonen 71749f5c66 Input: atmel_mxt_ts - allow board code to suppliy controller config
As there is no common configuration settings that would work in every
situation, remove the fixed config data from driver code and add
config data to platform data.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21 01:02:33 -08:00
Chris Leech 46ee2a05a4 Input: atmel_mxt_ts - add mXT224 identifier to id_table
"mXT224" is used in the Intel mid firmware in SFI tables to identify the
presence of this I2C device.

Signed-off-by: Chris Leech <christopher.leech@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21 01:02:33 -08:00
Iiro Valkonen 26cdb1ae76 Input: atmel_mxt_ts - read whole message to make CHG low
Read the whole message, as reading just the first byte isn't always
guaranteed to clear the message.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21 01:02:27 -08:00
Iiro Valkonen 7686b108d8 Input: atmel_mxt_ts - get rid of qt602240 prefixes in names
Change prefixes from qt602240 to mxt to reflect that the driver supports
whole line of mXT touchscreens.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21 01:02:27 -08:00
Dmitry Torokhov 964de52147 Input: qt602240_ts - rename to atmel_mxt_ts
Since the driver will be supporting whole range of Atmels mXT touchscreen
controllers we better rename it to atmel_mxt_ts.

Acked-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21 01:02:26 -08:00