We do blocking retry from our poll handler, if the file supports polled
notifications. Only mark the request as needing an async worker if we
can't poll for it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can have files like eventfd where it's perfectly fine to do poll
based retry on them, right now io_file_supports_async() doesn't take
that into account.
Pass in data direction and check the f_op instead of just always needing
an async worker.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Under heavy load, the EOTID termination FLOWC request fails to get
enqueued to the end of the Tx ring due to lack of credits. This
results in EOTID leak.
When disabling TC-MQPRIO offload, the link is already brought down
to cleanup EOTIDs. So, flush any pending enqueued skbs that can't be
sent outside the wire, to make room for FLOWC request. Also, move the
FLOWC descriptor consumption logic closer to when the FLOWC request is
actually posted to hardware.
Fixes: 0e395b3cb1 ("cxgb4: add FLOWC based QoS offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unfortunately sometimes ->probe() may fail. The commit b9663b7ca6
("net: stmmac: Enable SERDES power up/down sequence")
messed up with error handling and thus:
[ 12.811311] ------------[ cut here ]------------
[ 12.811993] kernel BUG at net/core/dev.c:9937!
Fix this by properly crafted error path.
Fixes: b9663b7ca6 ("net: stmmac: Enable SERDES power up/down sequence")
Cc: Voon Weifeng <weifeng.voon@intel.com>
Cc: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vregion helpers to get min and max priority depend on the correct
ordering of vchunks in the vregion list. However, the current code
always adds new chunk to the end of the list, no matter what the
priority is. Fix this by finding the correct place in the list and put
vchunk there.
Fixes: 22a677661f ("mlxsw: spectrum: Introduce ACL core with simple TCAM implementation")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 6040 recommends propagating an ECT(1) mark from an outer tunnel header
to the inner header if that inner header is already marked as ECT(0). When
RFC 6040 decapsulation was implemented, this case of propagation was not
added. This simply appears to be an oversight, so let's fix that.
Fixes: eccc1bb8d4 ("tunnel: drop packet if ECN present with not-ECT")
Reported-by: Bob Briscoe <ietf@bobbriscoe.net>
Reported-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com>
Cc: Dave Taht <dave.taht@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
security_fs_context_parse_param is called by vfs_parse_fs_param and
a succussful return value (i.e 0) implies that a parameter will be
consumed by the LSM framework. This stops all further parsing of the
parmeter by VFS. Furthermore, if an LSM hook returns a success, the
remaining LSM hooks are not invoked for the parameter.
The current default behavior of returning success means that all the
parameters are expected to be parsed by the LSM hook and none of them
end up being populated by vfs in fs_context
This was noticed when lsm=bpf is supplied on the command line before any
other LSM. As the bpf lsm uses this default value to implement a default
hook, this resulted in a failure to parse any fs_context parameters and
a failure to mount the root filesystem.
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Reported-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: James Morris <jmorris@namei.org>
The commit e6a41c23df, while trying to fix an issue,
("net: macb: ensure interface is not suspended on at91rm9200")
introduced a refcounting regression, because in error case refcounter
must be balanced. Fix it by calling pm_runtime_put_noidle() in error case.
While here, fix the same mistake in other couple of places.
Fixes: e6a41c23df ("net: macb: ensure interface is not suspended on at91rm9200")
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should an irq requested with 'devm_request_irq' be released explicitly,
it should be done by 'devm_free_irq()', not 'free_irq()'.
Fixes: 6c821bd9ed ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
MACsec decryption always occurs in a softirq context. Since
the FPU may not be usable in the softirq context, the call to
decrypt may be scheduled on the cryptd work queue. The cryptd
work queue does not provide ordering guarantees. Therefore,
preserving order requires masking out ASYNC implementations
of gcm(aes).
For instance, an Intel CPU with AES-NI makes available the
generic-gcm-aesni driver from the aesni_intel module to
implement gcm(aes). However, this implementation requires
the FPU, so it is not always available to use from a softirq
context, and will fallback to the cryptd work queue, which
does not preserve frame ordering. With this change, such a
system would select gcm_base(ctr(aes-aesni),ghash-generic).
While the aes-aesni implementation prefers to use the FPU, it
will fallback to the aes-asm implementation if unavailable.
By using a synchronous version of gcm(aes), the decryption
will complete before returning from crypto_aead_decrypt().
Therefore, the macsec_decrypt_done() callback will be called
before returning from macsec_decrypt(). Thus, the order of
calls to macsec_post_decrypt() for the frames is preserved.
While it's presumable that the pure AES-NI version of gcm(aes)
is more performant, the hybrid solution is capable of gigabit
speeds on modest hardware. Regardless, preserving the order
of frames is paramount for many network protocols (e.g.,
triggering TCP retries). Within the MACsec driver itself, the
replay protection is tripped by the out-of-order frames, and
can cause frames to be dropped.
This bug has been present in this code since it was added in
v4.6, however it may not have been noticed since not all CPUs
have FPU offload available. Additionally, the bug manifests
as occasional out-of-order packets that are easily
misattributed to other network phenomena.
When this code was added in v4.6, the crypto/gcm.c code did
not restrict selection of the ghash function based on the
ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would
select the ghash-clmulni driver instead of ghash-generic,
which submits to the cryptd work queue if the FPU is busy.
However, this bug was was corrected in v4.8 by commit
b30bdfa864, and was backported
all the way back to the v3.14 stable branch, so this patch
should be applicable back to the v4.6 stable branch.
Signed-off-by: Scott Dial <scott@scottdial.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Do not update the UDP checksum when it's zero, from Guillaume Nault.
2) Fix return of local variable in nf_osf, from Arnd Bergmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: three bug fixes
This series fixes three bugs in the Qualcomm IPA code. The third
adds a missing error code initialization step.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Zero the result code stored in a field of the scratch 0 register
before issuing a generic EE command. This just guarantees that
the value we read later was actually written as a result of the
command.
Also add the definitions of two more possible result codes that can
be returned when issuing flow control enable or disable commands:
INCORRECT_CHANNEL_STATE: - channel must be in started state
INCORRECT_DIRECTION - flow control is only valid for TX channels
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
An error message about limiting the number of TREs used prints the
wrong value. Fix this bug.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ipa_endpoint_stop(), for TX endpoints we set the number of retries
to 0. When we break out of the loop, retries being 0 means we return
EIO rather than the value of ret (which should be 0).
Fix this by using a non-zero retry count for both RX and TX
channels, and just break out of the loop after calling
gsi_channel_stop() for TX channels. This way only RX channels
will retry, and the retry count will be non-zero at the end
for TX channels (so the proper value gets returned).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic: fw upgrade bug fixes
These patches address issues found in additional internal
fw-upgrade testing.
v2:
- replaced extra state flag with postponing first link check
- added device reset patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Doing a device reset addresses an obscure FW timing issue in
the FW upgrade process.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure we can report the new FW version after a
fw-upgrade has finished by re-reading the device's
fw version information.
Fixes: c672412f61 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't bother with the link check during probe, let
the watchdog notice the first link-up. This allows
probe to finish cleanly without any interruptions
from over excited user programs opening the device
as soon as it is registered.
Fixes: c672412f61 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this code, it appears that phyter_clocks is a list head, based on
the previous list_for_each, and that clock->list is intended to be a
list element, given that it has just been initialized in
dp83640_clock_init. Accordingly, switch the arguments to
list_add_tail, which takes the list head as the second argument.
Fixes: cb646e2b02 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
User space can request to delete a range of VLANs from a bridge slave in
one netlink request. For each deleted VLAN the FDB needs to be traversed
in order to flush all the affected entries.
If a large range of VLANs is deleted and the number of FDB entries is
large or the FDB lock is contented, it is possible for the kernel to
loop through the deleted VLANs for a long time. In case preemption is
disabled, this can result in a soft lockup.
Fix this by adding a schedule point after each VLAN is deleted to yield
the CPU, if needed. This is safe because the VLANs are traversed in
process context.
Fixes: bdced7ef78 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Tested-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fixes for dma-buf, an off-by-one fix in edid, and a return code fix in
DP-MST
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXqrvVgAKCRDj7w1vZxhR
xazeAPMFYoHj36L2cbr7lrUDER2s6cNdCpUGN0tuQx9fYjmQAP0RRCXpbfyFESvf
MG5BBZvARO7OUtUCujogiPbmAVn1DQ==
=r+Az
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-04-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A few resources-related fixes for qxl, some doc build warnings and ioctl
fixes for dma-buf, an off-by-one fix in edid, and a return code fix in
DP-MST
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430153201.wx6of2b2gsoip7bk@gilmour.lan
5.7 merge window.
- Fix potential for DM writecache data corruption during DM table
reloads.
- Fix DM verity's FEC support's hash block number calculation in
verity_fec_decode().
- Fix bio-based DM multipath crash due to use of stale copy of
MPATHF_QUEUE_IO flag state in __map_bio().
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl6rSn4THHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWjmFB/9kwi4L5SQTg81ak0jmiO4lNSxqvc8s
ZJUyT8m/Iheh6FWo6kZYyfN+YVPPwXRFDWk4TGSrKyoqElTbpxkkmVxE7nhp9Z+O
1f7cfD8vCsTexHxYjxx3DxW529YVjvccifhaJFQgCA3II8+0to9PFzc7v6JpFBGS
1CWd169OUDHe2XGNmah0lbgwEgb7ZQRn9MNrkdYu3L9HihNLs8h4uin390FlfhSj
+/rS89jkA9X5MhFnspKrX0wGl3qoQBzFFvvn4KKPcH8EPt5zsUPVo+/rTOBL8Tr8
VXDYKco4CDfuqzB5LdHeTi3mKwGq+fpPmwzRTk+/gosDZHA49m7mLKGB
=cr8K
-----END PGP SIGNATURE-----
Merge tag 'for-5.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Document DM integrity allow_discard feature that was added during 5.7
merge window.
- Fix potential for DM writecache data corruption during DM table
reloads.
- Fix DM verity's FEC support's hash block number calculation in
verity_fec_decode().
- Fix bio-based DM multipath crash due to use of stale copy of
MPATHF_QUEUE_IO flag state in __map_bio().
* tag 'for-5.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm multipath: use updated MPATHF_QUEUE_IO on mapping for bio-based mpath
dm verity fec: fix hash block number in verity_fec_decode
dm writecache: fix data corruption when reloading the target
dm integrity: document allow_discard option
-----BEGIN PGP SIGNATURE-----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=HTrZ
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20200430' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Two more SELinux patches to fix problems in the v5.7-rcX releases.
Wei Yongjun's patch fixes a return code in an error path, and my patch
fixes a problem where we were not correctly applying access controls
to all of the netlink messages in the netlink_send LSM hook"
* tag 'selinux-pr-20200430' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: properly handle multiple messages in selinux_netlink_send()
selinux: fix error return code in cond_read_list()
This Kunit update for Linux 5.7-rc4 consists of a single fix to flush
the test summary to the console log without delay.
-----BEGIN PGP SIGNATURE-----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=ij8Q
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fix from Shuah Khan:
"A single fix to flush the test summary to the console log without
delay"
* tag 'linux-kselftest-kunit-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Add missing newline in summary message
This kselftest update for Linux 5.7-rc4 consists of:
- ftrace test fixes to check for required filter files and kprobe args.
- Kselftest build/cross-build dependency check script to make it easier
for test ring admins/users to configure build systems correctly for
build/cross-build kselftests. Currently checks library dependencies.
- Checks if Kselftests can be built/cross-built on a system running
compile test on a trivial C file with LDLIBS specified for each
individual test in their Makefiles.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl6rC9sACgkQCwJExA0N
QxwOqBAAuDgdAMKgks2ei8gc1A3NEeOCXmq5NtCeM5H80o+v5hALY4XeEHUAYpdI
/RC4XJ5sK8l/9AMhwoTxHdOjxGWGb7mznsNjUwqEicwpVxzpMRkcCfUavJdIWw3v
WkICPFuz5qj2ixdTvrYl1a3sHZr0yXAhoroI+Nbl4N2fhB80T9aZeE/mI6tgc4af
7pfSR6C4S+e0VocQeqof8uAMuUI4hJXg5nkSRLNLI6RHoTh4dE2Ozxhp+1KaW2P2
JivGD7mnqEn91r0Ai14uhvGQqJBFdLWhjqVhuSFf8I1cHBbTHu7ZEG+uARKYd8lP
SKF/AOkWxduBVQCY03gcynlhSjP6wN4/XIg/HMcS7KTyEQHB4nNavQY9XiHB2ARI
6f/1cKwA2VJMVbSlCMfC+E3/sIG05ht0XwiMhGapDy+B8pWKRiwsKn2GptG7R5th
b3y78Mkz4jK9OzC5rWY/tzOH9UVdI8sxSa3KXr1X2UDxX21R/XNzEVquj+zTEawo
jx63We3qLpzoh7d0K7hOCpAdZa6x7HpYGgc4ntUAttQLiALg7R+hEyltnsEd5WUs
w1hncEwcCGDw4QzIpOAvqlePZcqi+3C6ezo8bHhVJ/X5B6ikzzaB1pUiqpeeJfEj
J9Pus0+QQUdf19wJQwOjYcrxt8fmKRLPTHPQOAxOWzEnpFeGYzE=
=/gZD
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- ftrace test fixes to check for required filter files and kprobe args.
- Kselftest build/cross-build dependency check script to make it easier
for test ring admins/users to configure build systems correctly for
build/cross-build kselftests. Currently checks library dependencies.
- Checks if Kselftests can be built/cross-built on a system running
compile test on a trivial C file with LDLIBS specified for each
individual test in their Makefiles.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
* tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Check the first record for kprobe_args_type.tc
selftests: add build/cross-build dependency check script
selftests/ftrace: Check required filter files before running test
During MTU change, the following events may happen.
Client-driven CRQ initialization fails due to partner’s CRQ closed,
causing client to enqueue a reset task for FATAL_ERROR. Then passive
(server-driven) CRQ initialization succeeds, causing client to
release CRQ and enqueue a reset task for failover. If the passive
CRQ initialization occurs before the FATAL reset task is processed,
the FATAL error reset task would try to access a CRQ message queue
that was freed, causing an oops. The problem may be most likely to
occur during DLPAR add vNIC with a non-default MTU, because the DLPAR
process will automatically issue a change MTU request.
Fix this by not processing fatal error reset if CRQ is passively
initialized after client-driven CRQ initialization fails.
Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the SELinux netlink_send hook to properly handle multiple netlink
messages in a single sk_buff; each message is parsed and subject to
SELinux access control. Prior to this patch, SELinux only inspected
the first message in the sk_buff.
Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl6q+tEACgkQSD+KveBX
+j7PKAgAz5g/voNLiUn2Pz54a3qpYDy4OjpOIpyJeJ5mf0z9fZPRUO1Cx8Y0HY1f
dpySyZZ93kfl5DfWnMxST8Mk+2p8V0CD7EK1b0YrF3kdnhWoO7aAagJGEy6uc8Ez
wAuAK3VHs0Ufj1+YFpY9uYyvrAmkwY0WGZbfd1bKxS6D7ttp3OZ95k5o2MlJcpa+
36IDd3DH8V3jGLU83dtLISw8hLf/0tgCX5CrcelJpls5ge3ZlOTpevcLaoUg1UY4
CXC1igw1eBe658dC0TR64LPo25GVQCks8Oui4D1AbS3hhvKKePPTqNwyudl6BWP2
DXJWL6sJVCaX7Y8/7ttmNjDoO5aBxw==
=kuyA
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2020-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2020-04-29
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
v2:
- Dropped the ktls patch, Tariq has to check if it is fixable in the stack
For -stable v4.12
('net/mlx5: Fix forced completion access non initialized command entry')
('net/mlx5: Fix command entry leak in Internal Error State')
For -stable v5.4
('net/mlx5: DR, On creation set CQ's arm_db member to right value')
For -stable v5.6
('net/mlx5e: Fix q counters on uplink representors')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_v{4,6}_syn_recv_sock() set 'own_req' only when returning
a not NULL 'child', let's check 'own_req' only if child is
available to avoid an - unharmful - UBSAN splat.
v1 -> v2:
- reference the correct hash
Fixes: 4c8941de78 ("mptcp: avoid flipping mp_capable field in syn_recv_sock()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni says:
====================
mptcp: fix incoming options parsing
This series addresses a serious issue in MPTCP option parsing.
This is bigger than the usual -net change, but I was unable to find a
working, sane, smaller fix.
The core change is inside patch 2/5 which moved MPTCP options parsing from
the TCP code inside existing MPTCP hooks and clean MPTCP options status on
each processed packet.
The patch 1/5 is a needed pre-requisite, and patches 3,4,5 are smaller,
related fixes.
v1 -> v2:
- cleaned-up patch 1/5
- rebased on top of current -net
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When parsing MPC+data packets we set the dss field, so
we must also initialize the data_fin, or we can find stray
value there.
Fixes: 9a19371bf0 ("mptcp: fix data_fin handing in RX path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned RX option field is initialized only for DSS
packet, we must access it only if 'dss' is set too, or
the subflow will end-up in a bad status, leading to
RFC violations.
Fixes: d22f4988ff ("mptcp: process MP_CAPABLE data option")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzcaller has found a way to trigger the WARN_ON_ONCE condition
in check_fully_established().
The root cause is a legit fallback to TCP scenario, so replace
the WARN with a plain message on a more strict condition.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the MPTCP code uses 2 hooks to process syn-ack
packets, mptcp_rcv_synsent() and the sk_rx_dst_set()
callback.
We can drop the first, moving the relevant code into the
latter, reducing the hooking into the TCP code. This is
also needed by the next patch.
v1 -> v2:
- use local tcp sock ptr instead of casting the sk variable
several times - DaveM
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct nfs_server gets put on the cl_superblocks list before
the server->super field has been initialised, in which case the
call to nfs_sb_active() will Oops. Add a check to ensure that
we skip such a list entry.
Fixes: 3c9e502b59 ("NFS: Add a helper nfs_client_for_each_server()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
On arm64 linux gcc uses -fasynchronous-unwind-tables -funwind-tables
by default since gcc-8, so now the de facto platform ABI is to allow
unwinding from async signal handlers.
However on bare metal targets (aarch64-none-elf), and on old gcc,
async and sync unwind tables are not enabled by default to avoid
runtime memory costs.
This means if linux is built with a baremetal toolchain the vdso.so
may not have unwind tables which breaks the gcc platform ABI guarantee
in userspace.
Add -fasynchronous-unwind-tables explicitly to the vgettimeofday.o
cflags to address the ABI change.
Fixes: 28b1a824a4 ("arm64: vdso: Substitute gettimeofday() with C implementation")
Cc: Will Deacon <will@kernel.org>
Reported-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When replacing the bd_super check with a bd_openers I followed a logical
conclusion, which turns out to be utterly wrong. When a block device has
bd_super sets it has a mount file system on it (although not every
mounted file system sets bd_super), but that also implies it doesn't even
have partitions to start with.
So instead of trying to come up with a logical check for all openers,
just remove the check entirely.
Fixes: d3ef553627 ("block: fix busy device checking in blk_drop_partitions")
Fixes: cb6b771b05 ("block: fix busy device checking in blk_drop_partitions again")
Reported-by: Michal Koutný <mkoutny@suse.com>
Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Need to allocate the q counters before init_rx which needs them
when creating the rq.
Fixes: 8520fa57a4 ("net/mlx5e: Create q counters on uplink representors")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Processing commands by cmd_work_handler() while already in Internal
Error State will result in entry leak, since the handler process force
completion without doorbell. Forced completion doesn't release the entry
and event completion will never arrive, so entry should be released.
Fixes: 73dd3a4839 ("net/mlx5: Avoid using pending command interface slots")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5_cmd_flush() will trigger forced completions to all valid command
entries. Triggered by an asynch event such as fast teardown it can
happen at any stage of the command, including command initialization.
It will trigger forced completion and that can lead to completion on an
uninitialized command entry.
Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is
initialized will ensure force completion is treated only if command
entry is initialized.
Fixes: 73dd3a4839 ("net/mlx5: Avoid using pending command interface slots")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In polling mode, set arm_db member to a value that will avoid CQ
event recovery by the HW.
Otherwise we might get event without completion function.
In addition,empty completion function to was added to protect from
unexpected events.
Fixes: 297cccebdc ("net/mlx5: DR, Expose an internal API to issue RDMA operations")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When mlx5_modify_header_alloc() fails, instead of printing the error
value returned, current error log prints 0.
Fix by printing correct error value returned by
mlx5_modify_header_alloc().
Fixes: 6724e66b90 ("net/mlx5: E-Switch, Get reg_c1 value on miss")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Error unwinding is done incorrectly in the cited commit.
When steering init fails, there is no need to perform steering cleanup.
When vport error exists, error cleanup should be mirror of the setup
routine, i.e. to perform steering cleanup before metadata cleanup.
This avoids the call trace in accessing uninitialized objects which are
skipped during steering_init() due to failure in steering_init().
Call trace:
mlx5_cmd_modify_header_alloc:805:(pid 21128): too many modify header
actions 1, max supported 0
E-Switch: Failed to create restore mod header
BUG: kernel NULL pointer dereference, address: 00000000000000d0
[ 677.263079] mlx5_destroy_flow_group+0x13/0x80 [mlx5_core]
[ 677.268921] esw_offloads_steering_cleanup+0x51/0xf0 [mlx5_core]
[ 677.275281] esw_offloads_enable+0x1a5/0x800 [mlx5_core]
[ 677.280949] mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core]
[ 677.287227] mlx5_devlink_eswitch_mode_set+0x1af/0x320
[ 677.293741] devlink_nl_cmd_eswitch_set_doit+0x41/0xb0
[ 677.299217] genl_rcv_msg+0x1eb/0x430
Fixes: 7983a675ba ("net/mlx5: E-Switch, Enable chains only if regs loopback is enabled")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Jens Axboe