This patch adds f2fs_sb_info and page pointers in f2fs_io_info structure.
With this change, we can reduce a lot of parameters for IO functions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Export is_valid_blkaddr() and use it to replace some codes for readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds CP_RECOVERY to remain recovery information for checkpoint.
And, it makes sure writing checkpoint in this case.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Through each macro, we can read the meaning easily.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In a preempt-off enviroment a alot of FS activity (write/delete) I run
into a CPU stall:
| NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [kworker/u2:2:59]
| Modules linked in:
| CPU: 0 PID: 59 Comm: kworker/u2:2 Tainted: G W 3.19.0-00010-g10c11c51ffed #153
| Workqueue: writeback bdi_writeback_workfn (flush-179:0)
| task: df230000 ti: df23e000 task.ti: df23e000
| PC is at __submit_merged_bio+0x6c/0x110
| LR is at f2fs_submit_merged_bio+0x74/0x80
…
| [<c00085c4>] (gic_handle_irq) from [<c0012e84>] (__irq_svc+0x44/0x5c)
| Exception stack(0xdf23fb48 to 0xdf23fb90)
| fb40: deef3484 ffff0001 ffff0001 00000027 deef3484 00000000
| fb60: deef3440 00000000 de426000 deef34ec deefc440 df23fbb4 df23fbb8 df23fb90
| fb80: c02191f0 c0218fa0 60000013 ffffffff
| [<c0012e84>] (__irq_svc) from [<c0218fa0>] (__submit_merged_bio+0x6c/0x110)
| [<c0218fa0>] (__submit_merged_bio) from [<c02191f0>] (f2fs_submit_merged_bio+0x74/0x80)
| [<c02191f0>] (f2fs_submit_merged_bio) from [<c021624c>] (sync_dirty_dir_inodes+0x70/0x78)
| [<c021624c>] (sync_dirty_dir_inodes) from [<c0216358>] (write_checkpoint+0x104/0xc10)
| [<c0216358>] (write_checkpoint) from [<c021231c>] (f2fs_sync_fs+0x80/0xbc)
| [<c021231c>] (f2fs_sync_fs) from [<c0221eb8>] (f2fs_balance_fs_bg+0x4c/0x68)
| [<c0221eb8>] (f2fs_balance_fs_bg) from [<c021e9b8>] (f2fs_write_node_pages+0x40/0x110)
| [<c021e9b8>] (f2fs_write_node_pages) from [<c00de620>] (do_writepages+0x34/0x48)
| [<c00de620>] (do_writepages) from [<c0145714>] (__writeback_single_inode+0x50/0x228)
| [<c0145714>] (__writeback_single_inode) from [<c0146184>] (writeback_sb_inodes+0x1a8/0x378)
| [<c0146184>] (writeback_sb_inodes) from [<c01463e4>] (__writeback_inodes_wb+0x90/0xc8)
| [<c01463e4>] (__writeback_inodes_wb) from [<c01465f8>] (wb_writeback+0x1dc/0x28c)
| [<c01465f8>] (wb_writeback) from [<c0146dd8>] (bdi_writeback_workfn+0x2ac/0x460)
| [<c0146dd8>] (bdi_writeback_workfn) from [<c003c3fc>] (process_one_work+0x11c/0x3a4)
| [<c003c3fc>] (process_one_work) from [<c003c844>] (worker_thread+0x17c/0x490)
| [<c003c844>] (worker_thread) from [<c0041398>] (kthread+0xec/0x100)
| [<c0041398>] (kthread) from [<c000ed10>] (ret_from_fork+0x14/0x24)
As it turns out, the code loops in sync_dirty_dir_inodes() and waits for
others to make progress but since it never leaves the CPU there is no
progress made. At the time of this stall, there is also a rm process
blocked:
| rm R running 0 1989 1774 0x00000000
| [<c047c55c>] (__schedule) from [<c00486dc>] (__cond_resched+0x30/0x4c)
| [<c00486dc>] (__cond_resched) from [<c047c8c8>] (_cond_resched+0x4c/0x54)
| [<c047c8c8>] (_cond_resched) from [<c00e1aec>] (truncate_inode_pages_range+0x1f0/0x5e8)
| [<c00e1aec>] (truncate_inode_pages_range) from [<c00e1fd8>] (truncate_inode_pages+0x28/0x30)
| [<c00e1fd8>] (truncate_inode_pages) from [<c00e2148>] (truncate_inode_pages_final+0x60/0x64)
| [<c00e2148>] (truncate_inode_pages_final) from [<c020c92c>] (f2fs_evict_inode+0x4c/0x268)
| [<c020c92c>] (f2fs_evict_inode) from [<c0137214>] (evict+0x94/0x140)
| [<c0137214>] (evict) from [<c01377e8>] (iput+0xc8/0x134)
| [<c01377e8>] (iput) from [<c01333e4>] (d_delete+0x154/0x180)
| [<c01333e4>] (d_delete) from [<c0129870>] (vfs_rmdir+0x114/0x12c)
| [<c0129870>] (vfs_rmdir) from [<c012d644>] (do_rmdir+0x158/0x168)
| [<c012d644>] (do_rmdir) from [<c012dd90>] (SyS_unlinkat+0x30/0x3c)
| [<c012dd90>] (SyS_unlinkat) from [<c000ec40>] (ret_fast_syscall+0x0/0x4c)
As explained by Jaegeuk Kim:
|This inode is the directory (c.f., do_rmdir) causing a infinite loop on
|sync_dirty_dir_inodes.
|The sync_dirty_dir_inodes tries to flush dirty dentry pages, but if the
|inode is under eviction, it submits bios and do it again until eviction
|is finished.
This patch adds a cond_resched() (as suggested by Jaegeuk) after a BIO
is submitted so other thread can make progress.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[Jaegeuk Kim: change fs/f2fs to f2fs in subject as naming convention]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
cp_payload is introduced for sit bitmap to support large volume, and it is
just after the block of f2fs_checkpoint + nat bitmap, so the first segment
should include F2FS_CP_PACKS + NR_CURSEG_TYPE + cp_payload + orphan blocks.
However, current max orphan inodes calculation don't consider cp_payload,
this patch fix it by reducing the number of cp_payload from total blocks of
the first segment when calculate max orphan inodes.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
block operations is used to flush all dirty node and dentry blocks in
the page cache and suspend ordinary writing activities, however, there
are some facts such like cp error or mount read-only etc which lead to
block operations can't be invoked. Current trace point print block_ops
start premature even if block_ops doesn't have opportunity to execute.
This patch fix it by move block_ops trace point just before block_ops.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
cp_pack_start_sum is calculated in do_checkpoint and is equal to
cpu_to_le32(1 + cp_payload_blks + orphan_blocks). The number of
orphan inode blocks is take advantage of by recover_orphan_inodes
to readahead meta pages and recovery inodes. However, current codes
forget to reduce the number of cp payload blocks when calculate
the number of orphan inode blocks. This patch fix it.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch uses ->writepage of meta mapping in sync_meta_pages instead of
f2fs_write_meta_page, by this way, in its caller we can ignore any changes
(e.g. changing name) of this registered function.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch resolves the following warnings.
include/trace/events/f2fs.h:150:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:180:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:990:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:990:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:150:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
include/trace/events/f2fs.h:180:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
include/trace/events/f2fs.h:990:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
include/trace/events/f2fs.h:990:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
fs/f2fs/checkpoint.c:27:19: warning: symbol 'inode_entry_slab' was not declared. Should it be static?
fs/f2fs/checkpoint.c:577:15: warning: cast to restricted __le32
fs/f2fs/checkpoint.c:592:15: warning: cast to restricted __le32
fs/f2fs/trace.c:19:1: warning: symbol 'pids' was not declared. Should it be static?
fs/f2fs/trace.c:21:21: warning: symbol 'last_io' was not declared. Should it be static?
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds two macros for transition between byte and block offsets.
Currently, f2fs only supports 4KB blocks, so use the default size for now.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch merges ->{invalidate,release}page function for meta/node/data pages.
After this, duplication of codes could be removed.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds FASTBOOT flag into checkpoint as follows.
- CP_UMOUNT_FLAG is set when system is umounted.
- CP_FASTBOOT_FLAG is set when intermediate checkpoint having node summaries
was done.
So, if you get CP_UMOUNT_FLAG from checkpoint, the system was umounted cleanly.
Instead, if there was sudden-power-off, you can get CP_FASTBOOT_FLAG or nothing.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Do not change any partition when f2fs is changed to readonly mode.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, there are several variables with Boolean type as below:
struct f2fs_sb_info {
...
int s_dirty;
bool need_fsck;
bool s_closing;
...
bool por_doing;
...
}
For this there are some issues:
1. there are some space of f2fs_sb_info is wasted due to aligning after Boolean
type variables by compiler.
2. if we continuously add new flag into f2fs_sb_info, structure will be messed
up.
So in this patch, we try to:
1. switch s_dirty to Boolean type variable since it has two status 0/1.
2. merge s_dirty/need_fsck/s_closing/por_doing variables into s_flag.
3. introduce an enum type which can indicate different states of sbi.
4. use new introduced universal interfaces is_sbi_flag_set/{set,clear}_sbi_flag
to operate flags for sbi.
After that, above issues will be fixed.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We will encounter deadloop in below scenario:
1. increase page count for F2FS_DIRTY_META type in following path:
->recover_fsync_data
->recover_data
->do_recover_data
->recover_data_page
->change_curseg
->write_sum_page
->set_page_dirty
2. fail in recover_data()
3. invalidate meta pages in truncate_inode_pages_final without decreasing page
count.
4. deadloop when sync_meta_pages as page count will always be non-zero.
message:
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s!
[<c1129a37>] pagevec_lookup_tag+0x27/0x30
[<f0e774c7>] sync_meta_pages+0x87/0x160 [f2fs]
[<f0e86dd9>] recover_fsync_data+0xeb9/0xf10 [f2fs]
[<f0e75398>] f2fs_fill_super+0x888/0x980 [f2fs]
[<c11733ca>] mount_bdev+0x16a/0x1a0
[<f0e7180f>] f2fs_mount+0x1f/0x30 [f2fs]
[<c1173da6>] mount_fs+0x36/0x170
[<c118b6f5>] vfs_kern_mount+0x55/0xe0
[<c118d63f>] do_mount+0x1df/0x9f0
[<c118e110>] SyS_mount+0x70/0xb0
[<c15a0c48>] sysenter_do_call+0x12/0x12
To avoid page count leak, let's add ->invalidatepage and ->releasepage in
f2fs_meta_aops as f2fs_node_aops to release meta page count correctly.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the previous checkpoint was done without CP_UMOUNT flag, it needs to do
checkpoint with CP_UMOUNT for the next fast boot.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two slab cache inode_entry_slab and winode_slab using the same
structure as below:
struct dir_inode_entry {
struct list_head list; /* list head */
struct inode *inode; /* vfs inode pointer */
};
struct inode_entry {
struct list_head list;
struct inode *inode;
};
It's a little waste that the two cache can not share their memory space for each
other.
So in this patch we remove one redundant winode_slab slab cache, then use more
universal name struct inode_entry as remaining data structure name of slab,
finally we reuse the inode_entry_slab to store dirty dir item and gc item for
more effective.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch cleans up parameters on IO paths.
The key idea is to use f2fs_io_info adding a parameter, block address, and then
use this structure as parameters.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's add readahead code for reading contiguous compact/normal summary blocks
in checkpoint, then we will gain better performance in mount procedure.
Changes from v1
o remove inappropriate 'unlikely' in npages_for_summary_flush.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
To improve recovery speed, f2fs try to readahead many contiguous blocks in warm
node segment, but for most time, abnormal power-off do not occur frequently, so
when mount a normal power-off f2fs image, by contrary ra so many blocks and then
invalid them will hurt the performance of mount.
It's better to just ra the first next-block for normal condition.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch does cleanup work, it introduces is_valid_blkaddr() to include
verification code for blkaddr with upper and down boundary value which were in
ra_meta_pages previous.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1.We use zero as upper boundary value for ra SSA/CP blocks, we will skip
readahead as verification failure with max number, it causes low performance.
2.Low boundary value is not accurate for SSA/CP/POR region verification, so
these values need to be redefined.
This patch fixes above issues.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to fix:
BUG: using smp_processor_id() in preemptible [00000000] code: f2fs_gc-254:0/384
(radix_tree_node_alloc+0x14/0x74) from [<c033d8a0>] (radix_tree_insert+0x110/0x200)
(radix_tree_insert+0x110/0x200) from [<c02e8264>] (gc_data_segment+0x340/0x52c)
(gc_data_segment+0x340/0x52c) from [<c02e8658>] (f2fs_gc+0x208/0x400)
(f2fs_gc+0x208/0x400) from [<c02e8a98>] (gc_thread_func+0x248/0x28c)
(gc_thread_func+0x248/0x28c) from [<c0139944>] (kthread+0xa0/0xac)
(kthread+0xa0/0xac) from [<c0105ef8>] (ret_from_fork+0x14/0x3c)
The reason is that f2fs calls radix_tree_insert under enabled preemption.
So, before calling it, we need to call radix_tree_preload.
Otherwise, we should use _GFP_WAIT for the radix tree, and use mutex or
semaphore to cover the radix tree operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now in f2fs, we have three inode cache: ORPHAN_INO, APPEND_INO, UPDATE_INO,
and we manage fields related to inode cache separately in struct f2fs_sb_info
for each inode cache type.
This makes codes a bit messy, so that this patch intorduce a new struct
inode_management to wrap inner fields as following which make codes more neat.
/* for inner inode cache management */
struct inode_management {
struct radix_tree_root ino_root; /* ino entry array */
spinlock_t ino_lock; /* for ino entry lock */
struct list_head ino_list; /* inode list head */
unsigned long ino_num; /* number of entries */
};
struct f2fs_sb_info {
...
struct inode_management im[MAX_INO_ENTRY]; /* manage inode cache */
...
}
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
__submit_merged_bio f2fs_write_end_io f2fs_write_end_io
wait_io = X wait_io = x
complete(X) complete(X)
wait_io = NULL
wait_for_completion()
free(X)
spin_lock(X)
kernel panic
In order to avoid this, this patch removes the wait_io facility.
Instead, we can use wait_on_all_pages_writeback(sbi) to wait for end_ios.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces FITRIM in f2fs_ioctl.
In this case, f2fs will issue small discards and prefree discards as many as
possible for the given area.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add a new data structure to control checkpoint parameters.
Currently, it presents the reason of checkpoint such as is_umount and normal
sync.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, all the dnode pages should be read during the roll-forward recovery.
Even worsely, whole the chain was traversed twice.
This patch removes that redundant and costly read operations by using page cache
of meta_inode and readahead function as well.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, if there is no free nid in nm_i->free_nid_list, 0 may be saved
into next_free_nid of checkpoint, this may cause useless scanning for
next mount. nm_i->next_scan_nid should be a better default value than
0.
Signed-off-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously f2fs only counts dirty dentry pages, but there is no reason not to
expand the scope.
This patch changes the names on the management of dirty pages and to count
dirty pages in each inode info as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces DEF_NIDS_PER_INODE/GET_ORPHAN_BLOCKS/F2FS_CP_PACKS macro
instead of numbers in code for readability.
change log from v1:
o fix typo pointed out by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two rules when EIO is occurred.
1. don't write any checkpoint data to preserve the previous checkpoint
2. don't lose the cached dentry/node/meta pages
So, at first, this patch adds set_page_dirty in f2fs_write_end_io's failure.
Then, writing checkpoint/dentry/node blocks is not allowed.
Note that, for the data pages, we can't just throw away by redirtying them.
Otherwise, kworker can fall into infinite loop to flush them.
(Ref. xfstests/019)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to check s_dirty under cp_mutex, since s_dirty is reset under that
mutex.
And previous condition was not correct, since we can omit doing checkpoint
when checkpoint was done followed by all the node pages were written back.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The generic_shutdown_super calls sync_filesystem, evict_inode, and then
f2fs_put_super. In f2fs_evict_inode, we remain some dirty inode information
so we should release them at f2fs_put_super.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix typo and some grammatical errors.
The words "filesystem" and "readahead" are being used without the space treewide.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We do not need to block on ->node_write among different node page writers e.g.
fsync/flush, unless we have a node page writer from write_checkpoint.
So it's better use rw_semaphore instead of mutex type for ->node_write to
promote performance.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim