Support for Actions Semi SoCs depends on ARCH_MULTI_V7, and thus on
ARCH_MULTIPLATFORM.
As the latter selects COMMON_CLK, there is no need for ARCH_ACTIONS to
select COMMON_CLK.
Link: https://lore.kernel.org/r/20200505150722.1575-3-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ARM Architected timer is available on ARMv7 SoCs only.
As both ARCH_MULTIPLATFORM and ARM_SINGLE_ARMV7M select
GENERIC_CLOCKEVENTS, there is no need for HAVE_ARM_ARCH_TIMER to select
GENERIC_CLOCKEVENTS.
Link: https://lore.kernel.org/r/20200505150722.1575-2-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains core changes needed for the CPU frequency scaling and CPU
idle drivers on Tegra20 and Tegra30.
-----BEGIN PGP SIGNATURE-----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=7XEQ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.8-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc
ARM: tegra: Core changes for v5.8-rc1
This contains core changes needed for the CPU frequency scaling and CPU
idle drivers on Tegra20 and Tegra30.
* tag 'tegra-for-5.8-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Create tegra20-cpufreq platform device on Tegra30
ARM: tegra: Don't enable PLLX while resuming from LP1 on Tegra30
ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124
ARM: tegra: Correct PL310 Auxiliary Control Register initialization
ARM: tegra: Do not fully reinitialize L2 on resume
ARM: tegra: Initialize r0 register for firmware wake-up
firmware: tf: Different way of L2 cache enabling after LP2 suspend
firmware: tegra: Make BPMP a regular driver
Link: https://lore.kernel.org/r/20200515145311.1580134-10-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add debug-ll support for RZ/G1H.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXr5h7AAKCRCKwlD9ZEnx
cNCQAQCDwAbM0cVFjv8anAImZEVXrekVFqMTM4NG2WewPPfuvAD/W6UAgwvGJFeY
FzRJOu4RUrlLozQpyh7F2sd5lw9JHws=
=fTm6
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-soc-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc
Renesas ARM SoC updates for v5.8 (take two)
- Add debug-ll support for RZ/G1H.
* tag 'renesas-arm-soc-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: debug-ll: Add support for r8a7742
Link: https://lore.kernel.org/r/20200515100547.14671-4-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This series enables building various Versatile Express platform drivers
as modules. The primary target is the Fast Model FVP which is supported
in Android. As Android is moving towards their GKI, or generic kernel,
the hardware support has to be in modules. Currently ARCH_VEXPRESS
enables several built-in only drivers. Some of these are needed, but
some are only needed for older 32-bit VExpress platforms and can just
be disabled.
-----BEGIN PGP SIGNATURE-----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=c5eS
-----END PGP SIGNATURE-----
Merge tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into arm/soc
VExpress modularization
This series enables building various Versatile Express platform drivers
as modules. The primary target is the Fast Model FVP which is supported
in Android. As Android is moving towards their GKI, or generic kernel,
the hardware support has to be in modules. Currently ARCH_VEXPRESS
enables several built-in only drivers. Some of these are needed, but
some are only needed for older 32-bit VExpress platforms and can just
be disabled.
* tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ARM: vexpress: Don't select VEXPRESS_CONFIG
bus: vexpress-config: Support building as module
vexpress: Move setting master site to vexpress-config bus
bus: vexpress-config: simplify config bus probing
bus: vexpress-config: Merge vexpress-syscfg into vexpress-config
mfd: vexpress-sysreg: Support building as a module
mfd: vexpress-sysreg: Use devres API variants
mfd: vexpress-sysreg: Drop unused syscon child devices
mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO
clk: vexpress-osc: Support building as a module
clk: vexpress-osc: Use the devres clock API variants
clk: versatile: Only enable SP810 on 32-bit by default
clk: versatile: Rework kconfig structure
amba: Retry adding deferred devices at late_initcall
arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS
ARM: vexpress: Move vexpress_flags_set() into arch code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SoC related changes for omaps:
- Use ard instead of adrl for sleep34xx.S for clang
- Stop selecting MIGHT_HAVE_CACHE_L2X0, it's already selected
by ARCH_MULTI_V6_V7
- Make omap5_erratum_workaround_801819() and am43xx_get_rtc_base_addr()
static
-----BEGIN PGP SIGNATURE-----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=FJKz
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.8/soc-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
SoC changes for omaps for v5.8 merge window
SoC related changes for omaps:
- Use ard instead of adrl for sleep34xx.S for clang
- Stop selecting MIGHT_HAVE_CACHE_L2X0, it's already selected
by ARCH_MULTI_V6_V7
- Make omap5_erratum_workaround_801819() and am43xx_get_rtc_base_addr()
static
* tag 'omap-for-v5.8/soc-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: pm33xx-core: Make am43xx_get_rtc_base_addr static
ARM: omap2: make omap5_erratum_workaround_801819 static
ARM: omap2plus: Drop unneeded select of MIGHT_HAVE_CACHE_L2X0
ARM: OMAP2+: drop unnecessary adrl
Link: https://lore.kernel.org/r/pull-1589387719-605999@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
v5.8, please pull the following:
- Florian removes a print of a kernel virtual address in the Brahma-B15
read-ahead cache driver
-----BEGIN PGP SIGNATURE-----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=Pb95
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.8/soc' of https://github.com/Broadcom/stblinux into arm/soc
This pull request contains Broadcom ARM-based machine/SoC changes for
v5.8, please pull the following:
- Florian removes a print of a kernel virtual address in the Brahma-B15
read-ahead cache driver
* tag 'arm-soc/for-5.8/soc' of https://github.com/Broadcom/stblinux:
ARM: mm: Remove virtual address print from B15 RAC driver
Link: https://lore.kernel.org/r/20200511210522.28243-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
v5.8, please pull the following:
- Nicolas updates the git tree where all BCM2835 kernel development is
happening now
-----BEGIN PGP SIGNATURE-----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=aPWZ
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.8/maintainers' of https://github.com/Broadcom/stblinux into arm/soc
This pull request contains Broadcom SoCs MAINTAINERS file update for
v5.8, please pull the following:
- Nicolas updates the git tree where all BCM2835 kernel development is
happening now
* tag 'arm-soc/for-5.8/maintainers' of https://github.com/Broadcom/stblinux:
MAINTAINERS: Update Raspberry Pi development repository
Link: https://lore.kernel.org/r/20200511210522.28243-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Introduce ARCH_REALTEK also for 32-bit arm, and update MAINTAINERS.
-----BEGIN PGP SIGNATURE-----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=0APm
-----END PGP SIGNATURE-----
Merge tag 'realtek-soc-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/soc
Realtek Arm based SoC for v5.8
Introduce ARCH_REALTEK also for 32-bit arm, and update MAINTAINERS.
* tag 'realtek-soc-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek:
MAINTAINERS: Add Realtek arm DT files
ARM: Prepare Realtek RTD1195
Link: https://lore.kernel.org/r/20200510232158.18477-1-afaerber@suse.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Marvell MMP platform code is not a clock provider, and just needs to
call of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Link: https://lore.kernel.org/r/20200505154536.4099-4-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Mediatek platform code is not a clock provider, and just needs to
call of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Link: https://lore.kernel.org/r/20200505154536.4099-3-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ARM time code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Link: https://lore.kernel.org/r/20200505154536.4099-2-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that the non-DT IM-PD1 support code has been removed, drop the clock
related code from clk-impd1.c.
Link: https://lore.kernel.org/r/20200428204945.21067-1-robh@kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add Basic support for the new RZ/G1H SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXqqFRQAKCRCKwlD9ZEnx
cJbfAP9NprK6JzvJlvPXukIK8Q85oyKgabu1F702IWt956CHAwD/dEMzMPtxFKjg
HxbNb/OoyZA0wf4lpveF1Ai3qMy5oAE=
=FLj8
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-soc-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc
Renesas ARM SoC updates for v5.8
- Add Basic support for the new RZ/G1H SoC.
* tag 'renesas-arm-soc-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: r8a7742: Basic SoC support
Link: https://lore.kernel.org/r/20200430084849.1457-4-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Drop unneeded SPARSE_IRQ selection.
- Drop a bunch of other unneed selections already
selected by multiplatform overall Kconfig.
- Remove the dead sched_clock() code in plat-versatile.
- Drop the mapping of the IB2 registers. Now handled
by the PL11x DRM driver.
- Add a bus driver for the Integrator/AP logic modules,
along with its device tree bindings.
- Retire the LM and IM-PD1 boardfile code: we now handle
this with the bus driver and device tree.
- Select some Integrator features needed for boot in
its KConfig.
- Fix a minor MAINTAINERS entry.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl6oiR4ACgkQQRCzN7AZ
XXNsHQ//bIMJb/WlfhCc5AqQQ58iPQvyh3zhaus7M9OvNy+OO/qQCRl6yVYlMVb+
qDS5iVWn5jG5ntGK0j/TYJn4C5R3pf/1k2cbN6YbNd4vtdz4hRftqQ3Lnvsz11qT
HeAOQhXGoGe1kLBrUC5jVf+bUmYogOFXwKTfBeVSenwzRvi15yCpqkoCS0G7Q8K0
tzwP291LGlXx4XSWwxa93Y8fbj2tOtokOqKlsHWzb0FH1YJkDt9SXQ754Tl/Igaw
9ya9DtFF5JcufPVVgVY7qkp9VAxrUXOhs8VvFUQ4VeODMODiY8/fw0BFcZ6nQoJw
5AZSJ9x6MeaDw3Pp00TUbnVdzL3OIvffdUcqD+nU83GMhZCVBluxGF/9Aamwl19e
eImdOk9+qhi84hidQ+iuP7ecsglAJPBJAuejU/8IovX7B96oWr0oT7Ttrpuv/xJZ
wRs7DcfcgyWxIyQYsv/tFwuhSGqveFPzMGgaZ/3wFzzaxSAtwdzmVMPOb8YVrrAx
AzZltlwFg4U9lgY9FfCW8gPNbN94w6nhRvzkJVFD+GQXVtOCf/jzLH3YDsyFRkND
QgnXkJ84weAoDdBtbc4yG2h0KoKAdd85gf37vTtwCrSWMKmPFPLTJeip46ahDTLk
KYxKAvhyuu73JldojRF8odo0E8z34wtkIZt/DcgbOu+C4mC029M=
=ylIo
-----END PGP SIGNATURE-----
Merge tag 'versatile-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/soc
Versatile family updates for the v5.8 kernel series:
- Drop unneeded SPARSE_IRQ selection.
- Drop a bunch of other unneed selections already
selected by multiplatform overall Kconfig.
- Remove the dead sched_clock() code in plat-versatile.
- Drop the mapping of the IB2 registers. Now handled
by the PL11x DRM driver.
- Add a bus driver for the Integrator/AP logic modules,
along with its device tree bindings.
- Retire the LM and IM-PD1 boardfile code: we now handle
this with the bus driver and device tree.
- Select some Integrator features needed for boot in
its KConfig.
- Fix a minor MAINTAINERS entry.
* tag 'versatile-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
MAINTAINERS: adjust to renaming physmap_of_versatile.c
ARM: integrator: Add some Kconfig selections
ARM: integrator: Retire LM and IM-PD1 boardfile code
bus: Add driver for Integrator/AP logic modules
bus: Add DT bindings for Integrator/AP logic modules
ARM: versatile: Drop mapping IB2 module registers
ARM: versatile: Remove dead sched_clock code
ARM: realview: Drop unneeded select of multi-platform features
ARM: integrator: Drop unneeded select of SPARSE_IRQ
Link: https://lore.kernel.org/r/CACRpkdZR5LnnvrCnXodaTsam9-BuW+LkYSc+6jq-EisrRsq2eQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_VEXPRESS_CONFIG has 'default y if ARCH_VEXPRESS', so selecting is
unnecessary. Selecting it also prevents setting CONFIG_VEXPRESS_CONFIG
to a module.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
There's only a single caller of vexpress_config_set_master() from
vexpress-sysreg.c. Let's just make the registers needed available to
vexpress-config and move all the code there. The registers needed aren't
used anywhere else either. With this, we can get rid of the private API
between these 2 drivers.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The vexpress-config initialization is dependent on the vexpress-syscfg
driver probing. As vexpress-config was not a driver, deferred probe
could not be used and instead initcall ordering was relied upon. This is
fragile and doesn't work for modules.
Let's move the config bus init into the vexpress-syscfg probe. This
eliminates the initcall ordering requirement and the need to create a
struct device and the "vexpress-config" class.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The only thing that vexpress-syscfg does is provide a regmap to
vexpress-config bus child devices. There's little reason to have 2
components for this. The current structure with initcall ordering
requirements makes turning these components into modules more difficult.
So let's start to simplify things and merge vexpress-syscfg into
vexpress-config. There's no functional change in this commit and it's
still separate components until subsequent commits.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Enable building the vexpress-sysreg driver as a module.
As deferred probe between the vexpress components works now, we don't
need to create struct devices early with of_platform_device_create().
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Use the managed devm_gpiochip_add_data() and devm_mfd_add_devices()
instead of their unmanaged counterparts. With this, no .remove() hook is
needed for driver unbind.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The "sys_id", "sys_misc" and "sys_procid" devices don't have a user
anywhere in the tree and do nothing more than create a syscon regmap for
a single register or 2. That's an overkill for creating child devices.
Let's just remove them.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Nothing in the VExpress sysregs nor the MFD child drivers use
CONFIG_CLKSRC_MMIO. There's the 24MHz counter, but that's handled by
drivers/clocksource/timer-versatile.c which doesn't use
CONFIG_CLKSRC_MMIO either. So let's just drop CONFIG_CLKSRC_MMIO.
As the !ARCH_USES_GETTIMEOFFSET dependency was added for
CONFIG_CLKSRC_MMIO, that can be dropped, too.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Enable building the vexpress-osc clock driver as a module.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Fix the following sparse warning:
arch/arm/mach-omap2/pm33xx-core.c:270:14: warning: symbol 'am43xx_get_rtc_base_addr' was not declared.
The am43xx_get_rtc_base_addr has only call site within pm33xx-core.c
It should be static
Fixes: 8c5a916f4c ("ARM: OMAP2+: sleep33/43xx: Add RTC-Mode support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix sparse warning:
arch/arm/mach-omap2/omap-smp.c:75:6: warning: symbol
'omap5_erratum_workaround_801819' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ma Feng <mafeng.ma@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Eric Anholt's repo isn't used anymore. List current one.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Support for TI AM43x SoCs depends on ARCH_MULTI_V7, which selects
ARCH_MULTI_V6_V7.
As the latter selects MIGHT_HAVE_CACHE_L2X0, there is no need for
SOC_AM43XX to select MIGHT_HAVE_CACHE_L2X0.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We would be trying to print the kernel virtual address of the base
register address which is not very useful and is not displayed by
default because of pointer restriction. Print the Device Tree node name
instead which is what was originally intended.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The tegra20-cpufreq now instantiates cpufreq-dt and Tegra30 is fully
supported by that driver.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
PLLX may be kept disabled if cpufreq driver selects some other clock for
CPU. In that case PLLX will be disabled later in the resume path by the
CLK driver, which also can enable PLLX if necessary by itself. Thus there
is no need to enable PLLX early during resume. Tegra114/124 CLK drivers do
not manage PLLX on resume and thus they are left untouched by this patch.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The early-resume code shall not switch CPU to PLLX because PLLX
configuration could be unstable or PLLX should be simply disabled if
CPU enters into suspend running off some other PLL (the case if CPUFREQ
driver is active). The actual burst policy is restored by the clock
drivers.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PL310 Auxiliary Control Register shouldn't have the "Full line of
zero" optimization bit being set before L2 cache is enabled. The L2X0
driver takes care of enabling the optimization by itself.
This patch fixes a noisy error message on Tegra20 and Tegra30 telling
that cache optimization is erroneously enabled without enabling it for
the CPU:
L2C-310: enabling full line of zeros but not enabled in Cortex-A9
Cc: <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
ASUS TF300T device may not work properly if firmware is asked to fully
re-initialize L2 cache after resume from LP2 suspend. The downstream
kernel of TF300T uses different opcode to enable cache after resuming
from LP2, this opcode also works fine on Nexus 7 and Ouya devices.
Supposedly, this may be needed by an older firmware versions.
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Downstream kernel of ASUS TF300T sets r0 to #3. There is no explanation in
downstream code whether this is really needed and some of T30 downstream
kernels have and explicit comment telling that all arguments are ignored
by firmware. Let's take a safe side by replicating behavior of the TF300T
downstream kernel. This change works fine on Ouya and Nexus 7 devices.
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
ASUS TF300T device may not work properly if firmware is asked to fully
re-initialize L2 cache after resume from LP2 suspend. The downstream
kernel of TF300T uses different opcode to enable cache after resuming
from LP2, this opcode also works fine on Nexus 7 and Ouya devices.
Supposedly, this may be needed by an older firmware versions.
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In preparation to enable the vexpress-osc clock driver as a module,
convert the driver to use the managed devres clock API variants. With
this, a driver .remove() hook is not needed.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-clk@vger.kernel.org
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
While 64-bit Arm reference platforms have SP810 for clocks for SP804
timers, they are not needed since the arch timers are used instead.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-clk@vger.kernel.org
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
CONFIG_COMMON_CLK_VERSATILE doesn't really do anything other than hiding
Arm Ltd reference platform clock drivers. It is both selected by the
platforms that need it and has a 'depends on' for those platforms. Let's
drop the selects and convert CONFIG_COMMON_CLK_VERSATILE into a
menuconfig entry. With this make CONFIG_ICST visible.
Move the 'select REGMAP_MMIO' to the drivers that require it (SP810 did
not).
This also has the side effect of enabling CONFIG_ICST for COMPILE_TEST
as it was not visible before.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
If amba bus devices defer when adding, the amba bus code simply retries
adding the devices every 5 seconds. This doesn't work well as it
completely unsynchronized with starting the init process which can
happen in less than 5 secs. Add a retry during late_initcall. If the
amba devices are added, then deferred probe takes over. If the
dependencies have not probed at this point, then there's no improvement
over previous behavior. To completely solve this, we'd need to retry
after every successful probe as deferred probe does.
The list_empty() check now happens outside the mutex, but the mutex
wasn't necessary in the first place.
This needed to use deferred probe instead of fragile initcall ordering
on 32-bit VExpress systems where the apb_pclk has a number of probe
dependencies (vexpress-sysregs, vexpress-config).
Cc: John Stultz <john.stultz@linaro.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Russell King <linux@armlinux.org.uk>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The VExpress power-off/reset driver is not needed on 64-bit platforms as
PSCI power-off and reset can be used instead. Stop selecting it so it
can be disabled and not always built-in.
CONFIG_VEXPRESS_CONFIG can also be dropped as it was a dependency for
CONFIG_POWER_RESET_VEXPRESS.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
vexpress_flags_set() is only used by the platform SMP related code and
has nothing to do with the vexpress-sysreg MFD driver other than both
access the same h/w block. It's also only needed for 32-bit systems and
must be built-in for them. Let's move vexpress_flags_set() closer to
where it is being used. This will allow for vexpress-sysreg to be built
as a module.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xn0p
-----END PGP SIGNATURE-----
Merge tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A few more stability fixes, minor build warning fixes and git url
fixup:
- fix partial loss of prealloc extent past i_size after fsync
- fix potential deadlock due to wrong transaction handle passing via
journal_info
- fix gcc 4.8 struct intialization warning
- update git URL in MAINTAINERS entry"
* tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
MAINTAINERS: btrfs: fix git repo URL
btrfs: fix gcc-4.8 build warning for struct initializer
btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info
btrfs: fix partial loss of prealloc extent past i_size after fsync
Including:
- Fix for a memory leak when dev_iommu gets freed and a
sub-pointer does not.
- Build dependency fixes for Mediatek, spapr_tce, and
Intel IOMMU driver.
- Export iommu_group_get_for_dev() only for GPLed modules
- Fix for AMD IOMMU interrupt remapping when x2apic is
enabled
- Fix for error path in the QCOM IOMMU driver probe function
-----BEGIN PGP SIGNATURE-----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=UhNC
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Fix a memory leak when dev_iommu gets freed and a sub-pointer does
not
- Build dependency fixes for Mediatek, spapr_tce, and Intel IOMMU
driver
- Export iommu_group_get_for_dev() only for GPLed modules
- Fix AMD IOMMU interrupt remapping when x2apic is enabled
- Fix error path in the QCOM IOMMU driver probe function
* tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/qcom: Fix local_base status check
iommu: Properly export iommu_group_get_for_dev()
iommu/vt-d: Use right Kconfig option name
iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config
iommu/mediatek: Fix MTK_IOMMU dependencies
iommu: Fix the memory leak in dev_iommu_free()
The git repo listed for btrfs hasn't been updated in over a year.
List the current one instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Geert Uytterhoeven