Commit Graph

28 Commits

Author SHA1 Message Date
Sujith Manoharan 5b68138e56 ath9k: Drag the driver to the year 2011
The Times They Are a-Changin'.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19 13:54:05 -04:00
Vasanthakumar Thiagarajan 0b488ac6ec ath9k_hw: Configure pll control register accordingly for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:08 -04:00
Vasanthakumar Thiagarajan 3dfd7f6066 ath9k: Implement integer mode for AR9485
This fixes random disconnect.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12 16:59:37 -04:00
Felix Fietkau a9b6b2569c ath9k_hw: turn a few big macros into functions
RF_BANK_SETUP, REG_WRITE_RF_ARRAY and REG_WRITE_ARRAY are way too big,
so they shouldn't be inlined at every single callsite, especially since they
can easily be turned into real functions.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30 14:15:19 -04:00
Rajkumar Manoharan e7fc63388d ath9k_hw: Speedup register ops for HTC driver
Fine-tuning register write operation and avoid unnecessay
delays for ath9k_htc driver, saves hw reset time which
improves scanning time and also solves one of the following
scenario.

Sometimes the ACK is sent by STA for assoc response is not
seen at AP side. So the AP continues to send retry assoc
responses. At the STA side, since the assoc response was
already forwarded to mac80211, it proceeded to channel change
which in turns does chip reset.

In most of the cases the chip reset was completed before
max retries are reached at AP side. Hence STA can able to ACK
the retried frames again. But in clear environment these retries
are completed within shortspan of time.

Since ath9k_htc consumes more time for hw reset, this latency
is causing dissociation by AP due to max reties are reached.
This issue was originally reported with Cisco Aironet 1250 AP
in HT40 mode in noise free environment.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30 14:15:12 -04:00
Vasanthakumar Thiagarajan 85dd0921e6 ath9k_hw: Find chansel of AR_PHY_65NM_CH0_SYNTH7 for AR9485
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07 16:34:55 -05:00
Bruno Randolf 040e539e8e ath9k: Use common ath key management functions
Use key management functions which have been moved to ath/key.c and remove
ath9k copies of these functions and other now unused definitions.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-16 15:22:10 -04:00
Luis R. Rodriguez 1547da37db ath9k_hw: add OFDM spur mitigation for AR9003
We add this now as OFDM spur mitigation required accessing
the EEPROM for the AR9003 devices.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 15:43:38 -04:00
Luis R. Rodriguez 7152451aa1 ath9k_hw: add common channel select helpers for ar900[23]
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 15:43:23 -04:00
Luis R. Rodriguez 8fe6536850 ath9k_hw: Move some RF ops to the private callbacks
The PHY split is easier done in a few steps. First move
the RF ops to the private ops and rename them accordingly.
We split PHY stuff up first for the AR5008 and AR9002
families. There are some callbacks that AR9002 share
with the AR5008 familiy so we set those first, if AR9002
has some different callbacks it will override them upon
hardware init.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 15:43:19 -04:00
Luis R. Rodriguez aed1baf1ab ath9k_hw: remove wrapper ath9k_hw_write_regs()
This is used only once by ath9k_hw_process_ini() to
write an array of phy registers through REG_WRITE_ARRAY(),
but we already call REG_WRITE_ARRAY() multiple times
on the same caller so just remove this pointless wrapper.
We'll eventually just move the ath9k_hw_process_ini()
caller as an callback to abstract away between different
hardware families.

Although this change is subtle I should note that this
does change the delay pattern on writing the next series
of registers. REG_WRITE_ARRAY() uses a counter for each
register write and does a udelay(1) every 64 writes. By
removing this call it means that the counter is processed
for all the iniBB_RfGain registers and is incremented
on ath9k_hw_process_ini(), before this the after the call
ath9k_hw_write_regs() was made the register counter was
kept at the same index number prior to the call.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 15:32:03 -04:00
Vivek Natarajan 53bc7aa08b ath9k: Add support for newer AR9285 chipsets.
This patch adds support for a modified newer version of AR9285
chipsets.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07 14:37:57 -04:00
Felix Fietkau 7bfbae10dc ath9k: disable RIFS search for AR91xx based chips
While ath9k does not support RIFS yet, the ability to receive RIFS
frames is currently enabled for most chipsets in the initvals.
This is causing baseband related issues on AR9160 and AR9130 based
chipsets, which can lock up under certain conditions.

This patch fixes these issues by overriding the initvals, effectively
disabling RIFS for all affected chipsets.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-26 16:59:11 -05:00
Sujith 201cd6cce4 ath9k: Remove a few unused functions
ATH9K_ANT_VARIABLE is the default diversity control used.
Consequently ath9k_hw_decrease_chain_power() does nothing.
ath9k_hw_setantennaswitch() is unused too.

Also, gbeacon_rate is unused.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 17:09:12 -05:00
Luis R. Rodriguez 896ff26035 ath9k_hw: remove unused modesIndex param from ath9k_hw_write_regs()
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30 16:50:38 -04:00
Luis R. Rodriguez e16393bbb1 ath9k_hw: order phy.c code and integrate spur mitigation
This reorders phy.c routines in the order in the order in which they are used
and also moves the spur mitigation helpers for each type of chip into phy.c
as they are RF related.

This patch has no functional changes.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30 16:50:37 -04:00
Luis R. Rodriguez 0a3b7bac67 ath9k_hw: make both analog channel change routines return int
This allows us to later define a callback for both.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30 16:50:37 -04:00
Luis R. Rodriguez dc51dd5039 ath9k_hw: rename ath9k_hw_rf_free() to ath9k_hw_rf_free_ext_banks()
This clarifies this is only required for external radios.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30 16:50:37 -04:00
Luis R. Rodriguez 574d6b122d ath9k_hw: simplify rf attach and rename to ath9k_hw_rf_alloc_ext_banks()
ath9k_hw_rfattach() was just calling a helper and this helper was
doing nothing for single-chip devices, and for non single-chip devices
it is just allocating memory for banks to program the RF registers
at a later time. Simplify this by having the hw initialization call
the rf bank allocation directly for external radios.

Also, propagate an -ENOMEM properly now upon failure.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30 16:50:37 -04:00
Luis R. Rodriguez ec11bb88f9 ath9k_hw: correct AR_PHY_SPECTRAL_SCAN register offset
We had 0x9912 but AR_PHY_SPECTRAL_SCAN is 0x9910. By using the
0x9912 we were making the hardware unresponsive. This allows us
to move forward with hardware reset on ar9271 on the ath9k_htc
driver.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30 16:49:19 -04:00
Luis R. Rodriguez 6420014ca4 ath9k: remove ath9k 25 MHz HT40 spacing stuff
This was for supporting 25 MHz spacing for HT40, this is not used
as we use 20 MHz spacing instead for HT40 as per 802.11n. The hardware
is capable of it though so we leave the phymode definition and EEPROM
parsing for it. If some experimenter wants to work on this stuff stuff
you can add an extension enabling bool on ath_common and perhaps some
debugfs knob to enable it. Keep in mind you'll also need to update the
phymode with the AR_PHY_FC_DYN2040_EXT_CH which has been left on the
driver.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07 16:39:29 -04:00
Vivek Natarajan db91f2e4d4 ath9k: Add open loop power control support for AR9287.
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:35:51 -04:00
Sujith 7f63845f2a ath9k: Clean antenna configuration for 4K EEPROM chips
This patch revamps the antenna configuration mechanism
for 4K chips.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:35 -04:00
Sujith 066edc80eb ath9k: Add macros for Antenna Diversity
A subsequent patch would use these for configuring
antennae on AR9285.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:34 -04:00
Luis R. Rodriguez 670388c5f5 ath9k: add initvals and registry definitions for AR9271
Cc: Stephen Chen <stephen.chen@atheros.com>
Cc: Zhifeng Cai <zhifeng.cai@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04 16:44:34 -04:00
Vivek Natarajan ac88b6ecdf ath9k: Add support for AR9287 based chipsets.
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27 15:24:19 -04:00
Vasanthakumar Thiagarajan 8fbff4b838 ath9k: Cleanup ineffective return values
This patch makes the return type of some of the functions
void as those functions always return true

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11 15:24:05 -04:00
Luis R. Rodriguez 203c4805e9 atheros: put atheros wireless drivers into ath/
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:38 -04:00