Commit Graph

234 Commits

Author SHA1 Message Date
Dong Aisheng fc8726a2c0 clk: core: support clocks which requires parents enable (part 2)
On Freescale i.MX7D platform, all clocks operations, including
enable/disable, rate change and re-parent, requires its parent clock on.
Current clock core can not support it well.
This patch adding flag CLK_OPS_PARENT_ENABLE to handle this special case in
clock core that enable its parent clock firstly for each operation and
disable it later after operation complete.

The patch part 2 fixes set clock rate and set parent while its parent
is off. The most special case is for set_parent() operation which requires
all parents including both old and new one to be enabled at the same time
during the operation.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
[sboyd@codeaurora.org: Move set_rate tracepoint after prepare_enable]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-01 17:42:56 -07:00
Dong Aisheng a4b3518d14 clk: core: support clocks which requires parents enable (part 1)
On Freescale i.MX7D platform, all clocks operations, including
enable/disable, rate change and re-parent, requires its parent
clock enable. Current clock core can not support it well.
This patch introduce a new flag CLK_OPS_PARENT_ENABLE to handle this
special case in clock core that enable its parent clock firstly for
each operation and disable it later after operation complete.

The patch part 1 fixes the possible disabling clocks while its parent
is off during kernel booting phase in clk_disable_unused_subtree().

Before the completion of kernel booting, clock tree is still not built
completely, there may be a case that the child clock is on but its
parent is off which could be caused by either HW initial reset state
or bootloader initialization.

Taking bootloader as an example, we may enable all clocks in HW by default.
And during kernel booting time, the parent clock could be disabled in its
driver probe due to calling clk_prepare_enable and clk_disable_unprepare.
Because it's child clock is only enabled in HW while its SW usecount
in clock tree is still 0, so clk_disable of parent clock will gate
the parent clock in both HW and SW usecount ultimately. Then there will
be a child clock is still on in HW but its parent is already off.

Later in clk_disable_unused(), this clock disable accessing while its
parent off will cause system hang due to the limitation of HW which
must require its parent on.

This patch simply enables the parent clock first before disabling
if flag CLK_OPS_PARENT_ENABLE is set in clk_disable_unused_subtree().
This is a simple solution and only affects booting time.

After kernel booting up the clock tree is already created, there will
be no case that child is off but its parent is off.
So no need do this checking for normal clk_disable() later.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-01 17:40:23 -07:00
Dong Aisheng 7ec986efed clk: move clk_disable_unused after clk_core_disable_unprepare function
No function level change, just moving code place.
clk_disable_unused function will need to call clk_core_prepare_enable/
clk_core_disable_unprepare when adding CLK_OPS_PARENT_ENABLE features.
So move it after clk_core_disable_unprepare to avoid adding forward
declared functions later.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-01 17:40:20 -07:00
Dong Aisheng a6adc30ba7 clk: introduce clk_core_enable_lock and clk_core_disable_lock functions
This can be useful when clock core wants to enable/disable clocks.
Then we don't have to convert the struct clk_core to struct clk to call
clk_enable/clk_disable which is a bit un-align with exist using.

And after introduce clk_core_{enable|disable}_lock, we can refine
clk_enable and clk_disable a bit.

As well as clk_core_{enable|disable}_lock, we also added
clk_core_{prepare|unprepare}_lock and clk_core_prepare_enable/
clk_core_unprepare_disable for clock core to easily use.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-07-01 17:40:18 -07:00
Peng Fan 2d5b520cfe clk: correct comments for __clk_determine_rate
Correct comments for __clk_determine_rate.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-20 17:59:23 -07:00
Lee Jones 06b37e4a6e clk: Remove unused variable
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-20 17:46:30 -07:00
Michael Turquette 071a0cb66c Merge commit 'f17a0dd1c2e0' into clk-next 2016-06-16 22:07:08 -07:00
Paul E. McKenney f17a0dd1c2 clk: Use _rcuidle suffix to allow clk_core_enable() to used from idle
This commit fixes the RCU use-from-idle bug corresponding the following
splat:

> [ INFO: suspicious RCU usage. ]
> 4.6.0-rc5-next-20160426+ #1127 Not tainted
> -------------------------------
> include/trace/events/clk.h:45 suspicious rcu_dereference_check() usage!
>
> other info that might help us debug this:
>
>
> RCU used illegally from idle CPU!
> rcu_scheduler_active = 1, debug_locks = 0
> RCU used illegally from extended quiescent state!
> 2 locks held by swapper/0/0:
>  #0:  (&oh->hwmod_key#30){......}, at: [<c0121afc>] omap_hwmod_enable+0x18/0x44
>  #1:  (enable_lock){......}, at: [<c0630684>] clk_enable_lock+0x18/0x124
>
> stack backtrace:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1127
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> [<c047fd68>] (dump_stack) from [<c06315c0>] (clk_core_enable+0x1e0/0x36c)
> [<c06315c0>] (clk_core_enable) from [<c0632298>] (clk_enable+0x1c/0x38)
> [<c0632298>] (clk_enable) from [<c01204e0>] (_enable_clocks+0x18/0x7c)
> [<c01204e0>] (_enable_clocks) from [<c012137c>] (_enable+0x114/0x2ec)
> [<c012137c>] (_enable) from [<c0121b08>] (omap_hwmod_enable+0x24/0x44)
> [<c0121b08>] (omap_hwmod_enable) from [<c0122ad0>] (omap_device_enable+0x3c/0x90)
> [<c0122ad0>] (omap_device_enable) from [<c0122b34>] (_od_runtime_resume+0x10/0x38)
> [<c0122b34>] (_od_runtime_resume) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
> [<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
> [<c052cc54>] (rpm_callback) from [<c052df7c>] (rpm_resume+0x3d0/0x6f0)
> [<c052df7c>] (rpm_resume) from [<c052e2e8>] (__pm_runtime_resume+0x4c/0x64)
> [<c052e2e8>] (__pm_runtime_resume) from [<c04bf2c4>] (omap2_gpio_resume_after_idle+0x54/0x68)
> [<c04bf2c4>] (omap2_gpio_resume_after_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> [<c01269dc>] (omap3_enter_idle_bm) from [<c0601888>] (cpuidle_enter_state+0x80/0x3d4)
> [<c0601888>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: <linux-omap@vger.kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-clk@vger.kernel.org>
2016-06-15 13:45:22 -07:00
Paul E. McKenney 2f87a6ea1b clk: Add _rcuidle tracepoints to allow clk_core_disable() use from idle
This commit adds an _rcuidle suffix to a pair of trace events to
prevent the following splat:

> ===============================
> [ INFO: suspicious RCU usage. ]
> 4.6.0-rc5-next-20160426+ #1114 Not tainted
> -------------------------------
> include/trace/events/clk.h:59 suspicious rcu_dereference_check() usage!
>
> other info that might help us debug this:
>
>
> RCU used illegally from idle CPU!
> rcu_scheduler_active = 1, debug_locks = 0
> RCU used illegally from extended quiescent state!
> 2 locks held by swapper/0/0:
>  #0:  (&oh->hwmod_key#30){......}, at: [<c0121b40>] omap_hwmod_idle+0x18/0x44
>  #1:  (enable_lock){......}, at: [<c0630998>] clk_enable_lock+0x18/0x124
>
> stack backtrace:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1114
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> [<c047fd68>] (dump_stack) from [<c0631618>] (clk_core_disable+0x17c/0x348)
> [<c0631618>] (clk_core_disable) from [<c0632774>] (clk_disable+0x24/0x30)
> [<c0632774>] (clk_disable) from [<c0120590>] (_disable_clocks+0x18/0x7c)
> [<c0120590>] (_disable_clocks) from [<c0121680>] (_idle+0x12c/0x230)
> [<c0121680>] (_idle) from [<c0121b4c>] (omap_hwmod_idle+0x24/0x44)
> [<c0121b4c>] (omap_hwmod_idle) from [<c0122c24>] (omap_device_idle+0x3c/0x90)
> [<c0122c24>] (omap_device_idle) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
> [<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
> [<c052cc54>] (rpm_callback) from [<c052d150>] (rpm_suspend+0x100/0x768)
> [<c052d150>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84)
> [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5c/0x70)
> [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x244)
> [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4)
> [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: <linux-omap@vger.kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-clk@vger.kernel.org>
2016-06-15 13:45:18 -07:00
Maxime Ripard ef56b79b66 clk: fix critical clock locking
The critical clock handling in __clk_core_init isn't taking the enable lock
before calling clk_core_enable, which in turns triggers the warning in the
lockdep_assert_held call in that function when lockep is enabled.

Add the calls to clk_enable_lock/unlock to make sure it doesn't happen.

Fixes: 32b9b10961 ("clk: Allow clocks to be marked as CRITICAL")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-05-19 14:09:30 -07:00
Masahiro Yamada c47265ad64 clk: fix comment of devm_clk_hw_register()
Unlike devm_clk_register(), devm_clk_hw_register() returns integer.
So, the statement "Clocks returned from this function ..." sounds
odd.  Adjust the comment for this new API.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-05-02 17:52:03 -07:00
Stephen Boyd 58657d189a Merge branch 'clk-hw-register' (early part) into clk-next
* 'clk-hw-register' (early part):
  clk: fixed-rate: Add hw based registration APIs
  clk: gpio: Add hw based registration APIs
  clk: composite: Add hw based registration APIs
  clk: fractional-divider: Add hw based registration APIs
  clk: fixed-factor: Add hw based registration APIs
  clk: mux: Add hw based registration APIs
  clk: gate: Add hw based registration APIs
  clk: divider: Add hw based registration APIs
  clkdev: Add clk_hw based registration APIs
  clk: Add clk_hw OF clk providers
  clk: Add {devm_}clk_hw_{register,unregister}() APIs
  clkdev: Remove clk_register_clkdevs()
2016-04-21 14:47:18 -07:00
Stephen Boyd 0861e5b8cf clk: Add clk_hw OF clk providers
Now that we have a clk registration API that doesn't return
struct clks, we need to have some way to hand out struct clks via
the clk_get() APIs that doesn't involve associating struct clk
pointers with an OF node. Currently we ask the OF provider to
give us a struct clk pointer for some clkspec, turn that struct
clk into a struct clk_hw and then allocate a new struct clk to
return to the caller.

Let's add a clk_hw based OF provider hook that returns a struct
clk_hw directly, so that we skip the intermediate step of
converting from struct clk to struct clk_hw. Eventually when
we've converted all OF clk providers to struct clk_hw based APIs
we can remove the struct clk based ones.

It should also be noted that we change the onecell provider to
have a flex array instead of a pointer for the array of clk_hw
pointers. This allows providers to allocate one structure of the
correct length in one step instead of two.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-19 16:52:22 -07:00
Stephen Boyd 4143804c4f clk: Add {devm_}clk_hw_{register,unregister}() APIs
We've largely split the clk consumer and provider APIs along
struct clk and struct clk_hw, but clk_register() still returns a
struct clk pointer for each struct clk_hw that's registered.
Eventually we'd like to only allocate struct clks when there's a
user, because struct clk is per-user now, so clk_register() needs
to change.

Let's add new APIs to register struct clk_hws, but this time
we'll hide the struct clk from the caller by returning an int
error code. Also add an unregistration API that takes the clk_hw
structure that was passed to the registration API. This way
provider drivers never have to deal with a struct clk pointer
unless they're using the clk consumer APIs.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-19 16:51:58 -07:00
Lee Jones d56f8994b6 clk: Provide OF helper to mark clocks as CRITICAL
This call matches clocks which have been marked as critical in DT
and sets the appropriate flag.  These flags can then be used to
mark the clock core flags appropriately prior to registration.

Legacy bindings requiring this feature must add the clock-critical
property to their binding descriptions, as it is not a part of
common-clock binding.

Cc: devicetree@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1455225554-13267-4-git-send-email-mturquette@baylibre.com
2016-04-09 11:58:11 -07:00
Lee Jones 2e20fbf592 clk: WARN_ON about to disable a critical clock
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1455225554-13267-3-git-send-email-mturquette@baylibre.com
2016-04-09 11:58:10 -07:00
Lee Jones 32b9b10961 clk: Allow clocks to be marked as CRITICAL
Critical clocks are those which must not be gated, else undefined
or catastrophic failure would occur.  Here we have chosen to
ensure the prepare/enable counts are correctly incremented, so as
not to confuse users with enabled clocks with no visible users.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1455225554-13267-2-git-send-email-mturquette@baylibre.com
2016-04-09 11:58:10 -07:00
Stephen Boyd 929e7f3bc7 clk: Make of_clk_get_parent_count() return unsigned ints
Russell King recently pointed out a bug in the clk-gpio code
where it fails to register the clk if of_clk_get_parent_count()
returns an error because the "clocks" property isn't present in
the DT node. If we're trying to count parents from DT we'd like
to know the count, not if there is a "clocks" property or not.
Furthermore, some drivers are assigning the return value to their
clk_init_data::num_parents member which is unsigned, leading to
potentially large numbers of parents when the property isn't
present.

Let's change the API to return an unsigned int instead of an int.
All the callers just want to know the count anyway, and this
avoids the bug that was in the clk-gpio driver.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-26 16:01:32 -08:00
Geert Uytterhoeven 3e5dd6f6e6 clk: Ignore disabled DT clock providers
of_clk_init() uses for_each_matching_node_and_match() to find clock
providers, which returns all matching device nodes, whether they are
enabled or not. Hence clock providers that are disabled explicitly in DT
using e.g.

	"status = "disabled";

are still activated.

Add a check to ignore device nodes that are not enabled, like
of_irq_init() does.

Reported-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-26 09:39:38 -08:00
Shawn Lin 023bd7166b clk: skip unnecessary set_phase if nothing to do
Let's compare the degrees from clk_set_rate with
clk->core->phase. If the requested degrees is already
there, skip the following steps.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[sboyd@codeaurora.org: s/drgrees/degrees/ in commit text]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-25 18:10:51 -08:00
Stephen Boyd 706d5c73e3 clk: Update some outdated comments
__clk_init() was renamed to __clk_core_init() but these comments
weren't updated.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-22 15:43:41 -08:00
Stephen Boyd fa459711a0 Revert "clk: avoid circular clock topology"
This reverts commit 858d588156.

Joachim reports that this commit breaks lpc18xx boot. This is
because the hardware has circular clk topology where PLLs can
feed into dividers and the same dividers can feed into the PLLs.
The hardware is designed this way so that you can choose to put
the divider before the PLL or after the PLL depending on what you
configure to be the parent of the divider and what you configure
to be the parent of the PLL.

So let's drop this patch for now because we have hardware that
actually has loops. A future patch could check for circular
parents when we change parents and fail the switch, but that's
probably best left to some debugging Kconfig option so that we
don't suffer the sanity checking cost all the time.

Reported-by: Joachim Eastwood <manabian@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-22 15:01:39 -08:00
Andrew F. Davis fb4dd22203 clk: Make of_clk_get_from_provider() available to modules
Export symbol of_clk_get_from_provider so it can be used in
loadable kernel modules

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2016-02-17 16:50:13 -08:00
Masahiro Yamada 2430a94d1e clk: fix __clk_init_parent() for single parent clocks
Before commit b3d192d5121f ("clk: simplify __clk_init_parent()"),
__clk_init_parent() called .get_parent() only for multi-parent
clocks.  That commit changed the behavior to call .get_parent()
if available even for single-parent clocks and root clocks.

It turned out a problem because there are some single-parent clocks
that implement .get_parent() callback and return non-zero index.
The SOCFPGA clock is the case; the commit broke the SOCFPGA boards.

To keep the original behavior, invoke .get_parent() only when
num_parents is greater than 1.

Fixes: b3d192d5121f ("clk: simplify __clk_init_parent()")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-09 10:18:48 -08:00
Stephen Boyd 47b0eeb3dc clk: Deprecate CLK_IS_ROOT
We don't use CLK_IS_ROOT but in a few places in the common clk
framework core. Let's replace those checks with a check for the
number of parents a clk has instead of the flag, freeing up one
flag for something else. We don't remove the flag yet so that
things keep building, but we'll remove it once all drivers have
removed their flag usage.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-06 23:38:26 -08:00
Insu Yun 4106a3d9eb clk: unlock for handling unregistered clock
If clock is already unregistered, it returns with holding lock.
It needs to be unlocked.

Signed-off-by: Insu Yun <wuninsu@gmail.com>
[sboyd@codeaurora.org: Use goto instead]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-02 11:54:07 -08:00
Masahiro Yamada e8f0e68ec0 clk: slightly optimize clk_core_set_parent()
If clk_fetch_parent_index() fails, p_rate is unused.  Move the
assignment after the error checking.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-02 11:53:17 -08:00
Masahiro Yamada 470b5e2f97 clk: simplify clk_fetch_parent_index() function
The clk_core_get_parent_by_index can be used as a helper function
to simplify the implementation of clk_fetch_parent_index().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-02 11:53:16 -08:00
Masahiro Yamada 508f884a66 clk: make sure parent is not NULL in clk_fetch_parent_index()
If parent is given with NULL, clk_fetch_parent_index() could return
a positive index value.

Currently, parent is checked by the callers of this function, but
it would be safer to do it in this function.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-02 11:53:15 -08:00
Masahiro Yamada 0e8f6e499e clk: walk the orphan clock list more simply
This loop can be much simpler. If a new parent is available for
orphan clocks, __clk_init_parent(orphan) can detect it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-02 11:53:14 -08:00
Masahiro Yamada 858d588156 clk: avoid circular clock topology
Currently, clk_register() never checks a circular parent looping,
but clock providers could register such an insane clock topology.
For example, "clk_a" could have "clk_b" as a parent, and vice versa.
In this case, clk_core_reparent() creates a circular parent list
and __clk_recalc_accuracies() calls itself recursively forever.

The core infrastructure should be kind enough to bail out, showing
an appropriate error message in such a case.  This helps to easily
find a bug in clock providers.  (uh, I made such a silly mistake
when I was implementing my clock providers first.  I was upset
because the kernel did not respond, without any error message.)

This commit adds a new helper function, __clk_is_ancestor().  It
returns true if the second argument is a possible ancestor of the
first one.  If a clock core is a possible ancestor of itself, it
would make a loop when it were registered.  That should be detected
as an error.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-02 11:53:13 -08:00
Masahiro Yamada 5146e0b059 clk: simplify __clk_init_parent()
The translation from the index into clk_core is done by
clk_core_get_parent_by_index().  The if-block for num_parents == 1
case is duplicating the code in the clk_core_get_parent_by_index().

Drop the "if (num_parents == 1)" from the special case.  Instead,
set the index to zero if .get_parent() is missing.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-02 11:53:10 -08:00
Masahiro Yamada 3c8e77dd20 clk: move checking .get_parent to __clk_core_init()
The .get_parent is mandatory for multi-parent clocks.  Move the check
to __clk_core_init(), like other callback checkings.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
[sboyd@codeaurora.org: Squashed in error path handling, fix typos
in commit message]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-02 11:52:06 -08:00
Masahiro Yamada c44fccb5f7 clk: replace pr_warn() with pr_err() for fatal cases
These three cases let clk_register() fail.  They should be considered
as error messages.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-01 17:01:59 -08:00
Masahiro Yamada 3c436bf95a clk: drop the initial core->parents look-ups from __clk_core_init()
The core->parents is a cache to save expensive clock parent look-ups.
It will be filled as needed later.  We do not have to do it here.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-01 17:01:54 -08:00
Masahiro Yamada 88cfbef2ac clk: simplify clk_core_get_parent_by_index()
Drop the "if (!core->parents)" case and refactor the function a bit
because core->parents is always allocated.  (Strictly speaking, it is
ZERO_SIZE_PTR if core->num_parents == 0, but such a case is omitted
by the if-conditional above.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-01 17:01:50 -08:00
Masahiro Yamada 176d11690b clk: move core->parents allocation to clk_register()
Currently, __clk_core_init() allows failure of the kcalloc() for the
core->parents.  So, clk_fetch_parent_index() and __clk_init_parent()
also try to allocate core->parents in case it has not been allocated
yet.  Scattering memory allocation here and there makes things
complicated.

Like other clk_core members, allocate core->parents in clk_register()
and let it fail in case of memory shortage.  If we cannot allocate
such a small piece of memory, the system is already insane.  There is
no point to postpone the memory allocation.

Also, allocate core->parents regardless of core->num_parents.  We want
it even if core->num_parents == 1 because clk_fetch_parent_index()
might be called against the clk_core with a single parent.

If core->num_parents == 0, core->parents is set to ZERO_SIZE_PTR. It
is harmless because no access happens to core->parents in such a case.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-01 17:01:46 -08:00
Masahiro Yamada 3a6e845451 clk: change sizeof(struct clk *) to sizeof(*core->parents)
Now, the clock parent is not "struct clk *", but "struct clk_core *".
Of course, the size of a pointer is always same, but strictly speaking,
sizeof(struct clk *) should be sizeof(struct clk_core *) here.

This mismatch happened when we split the structure into struct clk
and struct clk_core.  For the potential possibility of future renaming,
sizeof(*core->parents) would be better.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-01 17:01:43 -08:00
Masahiro Yamada 027f942ce4 clk: remove unnecessary !core->parents conditional
This if-block has been here since the introduction of the common
clock framework.  Now no clock drivers are statically initialized.
core->parent is always NULL at this point.  Drop the redundant
check and the confusing comment.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-01 17:01:39 -08:00
Masahiro Yamada be45ebf25f clk: rename __clk_init() into __clk_core_init()
Now this function takes clk_core as its argument.  __clk_core_init()
would be more suitable for the name of this function.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-01 17:01:36 -08:00
Masahiro Yamada d35c80c248 clk: change the argument of __clk_init() into pointer to clk_core
The argument clk_user is used only for the clk_user->core.  The rest
of this function only takes care of clk_core.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-01 17:01:32 -08:00
Masahiro Yamada d9e743408e clk: remove unused first argument of __clk_init()
The "struct device *dev" is not used at all in this function.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-01 17:01:28 -08:00
Michael Turquette a915e30dd2 Merge branch 'clk-rockchip' into clk-next 2015-12-23 13:08:56 -08:00
Heiko Stuebner 2eb8c7104c clk: add flag for clocks that need to be enabled on rate changes
Some clocks need to be enabled to accept rate changes. This patch adds a
new flag CLK_SET_RATE_UNGATE that lets clk_change_rate enable the clock
before trying to change the rate and disable it again afterwards.
This of course doesn't effect clocks that are already running at that
point, as their refcount will only temporarily increase.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-23 12:57:31 -08:00
Masahiro Yamada 8da411cc19 clk: let of_clk_get_parent_name() fail for invalid clock-indices
Currently, of_clk_get_parent_name() returns a wrong parent clock name
when "clock-indices" property exists and the target index is not
found in the property.  In this case, NULL should be returned.

For example,

        oscillator {
                compatible = "myclocktype";
                #clock-cells = <1>;
                clock-indices = <1>, <3>;
                clock-output-names = "clka", "clkb";
        };

        consumer {
                compatible = "myclockconsumer";
                clocks = <&oscillator 0>, <&oscillator 1>;
        };

Currently, of_clk_get_parent_name(consumer_np, 0) returns "clka"
(and of_clk_get_parent_name(consumer_np, 1) also returns "clka",
this is correct).   Because the "clock-indices" in the clock parent
does not contain <0>, of_clk_get_parent_name(consumer_np, 0) should
return NULL.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-12-02 22:34:43 -08:00
Masahiro Yamada 198bb59493 clk: fix a typo in comment block of clk_notifier_register()
The word "cases" is doubled.  Keep decent forms for the following
lines.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-30 11:36:07 -08:00
Geert Uytterhoeven 3fe003f944 clk: Spelling s/derefing/dereferencing/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-20 11:17:55 -08:00
Masahiro Yamada c1de13574d clk: use IS_ERR_OR_NULL(hw) instead of !hw || IS_ERR(hw)
This minor refactoring does not change the function behavior.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-20 09:20:54 -08:00
Masahiro Yamada c736c4e11e clk: remove redundant negative index check in of_clk_get_parent_name()
This if-block can be dropped because the of_parse_phandle_with_args()
in the following line returns -EINVAL for negative index.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-11-20 09:18:24 -08:00
Joachim Eastwood be68bf8831 clk: Add clk_hw_is_enabled() for use by clk providers
Add clk_hw_is_enabled() to the provider APIs so clk providers can
use a struct clk_hw instead of a struct clk to check if a clk is
enabled or not.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-26 12:36:55 -07:00