The function cached_dev_make_request() and flash_dev_make_request() call
generic_start_io_acct() with (struct bcache_device)->disk when they start a
closure. Then the function bio_complete() calls generic_end_io_acct() with
(struct search)->orig_bio->bi_disk when the closure has done.
Since the `bi_disk` is not the bcache device, the generic_end_io_acct() is
called with a wrong device queue.
It causes the "inflight" (in struct hd_struct) counter keep increasing
without decreasing.
This patch fix the problem by calling generic_end_io_acct() with
(struct bcache_device)->disk.
Signed-off-by: Zhai Zhaoxuan <kxuanobj@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[edit by mlyle: include sched/debug.h to get __sched]
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Eliminates cases where sync can race and fail to complete / get stuck.
Removes many status flags and simplifies entering-and-exiting closure
sleeping behaviors.
[mlyle: fixed conflicts due to changed return behavior in mainline.
extended commit comment, and squashed down two commits that were mostly
contradictory to get to this state. Changed __set_current_state to
set_current_state per Jens review comment]
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the control system would wait for at least half a second, and there's
been no reqs hitting the backing disk for awhile: use an alternate mode
where we have at most one contiguous set of writebacks in flight at a
time. (But don't otherwise delay). If front-end IO appears, it will
still be quick, as it will only have to contend with one real operation
in flight. But otherwise, we'll be sending data to the backing disk as
quickly as it can accept it (with one op at a time).
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Writeback keys are presently iterated and dispatched for writeback in
order of the logical block address on the backing device. Multiple may
be, in parallel, read from the cache device and then written back
(especially when there are contiguous I/O).
However-- there was no guarantee with the existing code that the writes
would be issued in LBA order, as the reads from the cache device are
often re-ordered. In turn, when writing back quickly, the backing disk
often has to seek backwards-- this slows writeback and increases
utilization.
This patch introduces an ordering mechanism that guarantees that the
original order of issue is maintained for the write portion of the I/O.
Performance for writeback is significantly improved when there are
multiple contiguous keys or high writeback rates.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Tested-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
in bch_debug_init(), ret is always 0, and the return value is useless,
change it to return 0 if be success after calling debugfs_create_dir(),
else return a non-zero value.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In such scenario that there are some flash only volumes
, and some cached devices, when many tasks request these devices in
writeback mode, the write IOs may fall to the same bucket as bellow:
| cached data | flash data | cached data | cached data| flash data|
then after writeback of these cached devices, the bucket would
be like bellow bucket:
| free | flash data | free | free | flash data |
So, there are many free space in this bucket, but since data of flash
only volumes still exists, so this bucket cannot be reclaimable,
which would cause waste of bucket space.
In this patch, we segregate flash only volume write streams from
cached devices, so data from flash only volumes and cached devices
can store in different buckets.
Compare to v1 patch, this patch do not add a additionally open bucket
list, and it is try best to segregate flash only volume write streams
from cached devices, sectors of flash only volumes may still be mixed
with dirty sectors of cached device, but the number is very small.
[mlyle: fixed commit log formatting, permissions, line endings]
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix ptr_ret.cocci warnings:
drivers/md/bcache/btree.c:1800:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, when a cached device detaching from cache, writeback thread is
not stopped, and writeback_rate_update work is not canceled. For example,
after the following command:
echo 1 >/sys/block/sdb/bcache/detach
you can still see the writeback thread. Then you attach the device to the
cache again, bcache will create another writeback thread, for example,
after below command:
echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach
then you will see 2 writeback threads.
This patch stops writeback thread and cancels writeback_rate_update work
when cached device detaching from cache.
Compare with patch v1, this v2 patch moves code down into the register
lock for safety in case of any future changes as Coly and Mike suggested.
[edit by mlyle: commit log spelling/formatting]
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The read request might meet error when searching the btree, but the error
was not handled in cache_lookup(), and this kind of metadata failure will
not go into cached_dev_read_error(), finally, the upper layer will receive
bi_status=0. In this patch we judge the metadata error by the return
value of bch_btree_map_keys(), there are two potential paths give rise to
the error:
1. Because the btree is not totally cached in memery, we maybe get error
when read btree node from cache device (see bch_btree_node_get()), the
likely errno is -EIO, -ENOMEM
2. When read miss happens, bch_btree_insert_check_key() will be called to
insert a "replace_key" to btree(see cached_dev_cache_miss(), just for
doing preparatory work before insert the missed data to cache device),
a failure can also happen in this situation, the likely errno is
-ENOMEM
bch_btree_map_keys() will return MAP_DONE in normal scenario, but we will
get either -EIO or -ENOMEM in above two cases. if this happened, we should
NOT recover data from backing device (when cache device is dirty) because
we don't know whether bkeys the read request covered are all clean. And
after that happened, s->iop.status is still its initially value(0) before
we submit s->bio.bio, we set it to BLK_STS_IOERR, so it can go into
cached_dev_read_error(), and finally it can be passed to upper layer, or
recovered by reread from backing device.
[edit by mlyle: patch formatting, word-wrap, comment spelling,
commit log format]
Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Trying to do both SCSI and NVMe bio-based handling with branching in the
same common code has proven too tedious on a code maintenance level. In
addition it slightly hurts IO performance.
Fix this by factoring out __map_bio() and __map_bio_nvme().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
All code that deals with pg_init is not used with bio-based NVMe mode.
This includes skipping initialization of pg_init related variables.
Also, pg_init related members on 'struct multipath' have been grouped
together.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The bio is always freed after running crypt_free_buffer_pages(), so it
isn't necessary to clear bv->bv_page.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc:dm-devel@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bcache is the only user of bio_alloc_pages(), so move this function into
bcache, and avoid it being misused in the future.
Also rename it to bch_bio_allo_pages() since it is bcache only.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All direct access to bvec table are safe even after multipage bvec is
supported.
Cc: linux-bcache@vger.kernel.org
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For BIO based DM, some targets aren't ready for dealing with bigger
incoming bio than 1Mbyte, such as crypt target.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc:dm-devel@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch converts to bio_first_bvec_all() & bio_first_page_all() for
retrieving the 1st bvec/page, and prepares for supporting multipage bvec.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This DM multipath NVMe bio-based support requires CONFIG_NVME_MULTIPATH
to not be set. In the future hopefully NVMe multipath and DM multipath
can co-exist more seemlessly. But as is, if CONFIG_NVME_MULTIPATH=Y
then all the individal NVMe paths will remain hidden to upper layers and
as such DM multipath will not be able to manage them.
Though NVMe's native multipathing doesn't multipath namespaces across
subsystems; so technically a user _could_ use CONFIG_NVME_MULTIPATH=Y
and also use DM multipath to multipath across subsystems.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Moving the dm_bio_restore() to process_queued_bios() avoids doing that
work in multipath_end_io_bio().
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Log recovery is critical for raid5 journal/cache. Printing information
about each recovery by default will help the system admin monitor the
status of the array.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
All underlying members are initialized directly so the memset() calls
are not needed. Also, initialize mpio->nr_bytes from the start since it
never changes.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Upper level bio-based drivers that stack immediately ontop of NVMe can
leverage direct_make_request(). In addition DM's NVMe bio-based
will initially only ever have one NVMe device that it submits IO to at a
time. There is no splitting needed. Enhance DM core so that
DM_TYPE_NVME_BIO_BASED's IO submission takes advantage of both of these
characteristics.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If dm_table_determine_type() establishes DM_TYPE_NVME_BIO_BASED then
all devices in the DM table do not support partial completions. Also,
the table has a single immutable target that doesn't require DM core to
split bios.
This will enable adding NVMe optimizations to bio-based DM.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
No apparent need to generic_start_io_acct() until before the IO is ready
for submission. start_io_acct() is the proper place to do this
accounting -- it is also where DM accounts for pending IO and, if
enabled, starts dm-stats accounting.
Replace start_io_acct()'s part_round_stats() with generic_start_io_acct().
This eliminates needing to take part_stat_lock() multiple times when
starting an IO on bio-based devices.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Eliminates need for a separate mempool to allocate 'struct dm_io'
objects from. As such, it saves an extra mempool allocation for each
original bio that DM core is issued.
This complicates the per-bio-data accessor functions by needing to
conditonally add extra padding to get to a target's per-bio-data. But
in the end this provides a decent performance improvement for all
bio-based DM devices.
On an NVMe-loop based testbed to a ramdisk (~3100 MB/s): bio-based
DM linear performance improved by 2% (went from 2665 to 2777 MB/s).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
These CRUD comments have worn out their welcome. The code is what it
is, over time it'll hopefully get better. But these comments serve no
purpose whatsoever.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Fix various targets to dm_register_target after module __init
resources created; otherwise racing lvm2 commands could result in a
NULL pointer during initialization of associated DM kernel module.
- Fix regression in bio-based DM multipath queue_if_no_path handling.
- Fix DM bufio's shrinker to reclaim more than one buffer per scan.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaNBomAAoJEMUj8QotnQNao5IH/0X0Auycfx2O8dkVoRhW1Q3x
NNt7m6aKhmdUsBYOug9/na5kNKqsRzKyPYSV9bM0Cy5mJzgxQYMeL5Tmu2qwGDOL
1C/HUhffmZJQ+lK5dS2wQ41Ep+lppm8KYofJ70Ueb+JQ9Uxmkp9GXGud0LrJ0QzR
9D5i/3jAlZuOnGLQ0+Q0E9wXa8sQdfrAbcPzz+4nG9aqGcz2T5lfbwg1K+Ym0U3r
0jBAHZWhamJQP1gW1+i0EWWtR68TgaWbHeTjrdvm2pUueAaywJzP9oeK++p3Op+9
A2JRE3I4ClAkUBjj480UAJW8Egg6zZ1mfOKta/CpqChbVqqjANi9lGSyRlkYMFg=
=oNN+
-----END PGP SIGNATURE-----
Merge tag 'for-4.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- fix a particularly nasty DM core bug in a 4.15 refcount_t conversion.
- fix various targets to dm_register_target after module __init
resources created; otherwise racing lvm2 commands could result in a
NULL pointer during initialization of associated DM kernel module.
- fix regression in bio-based DM multipath queue_if_no_path handling.
- fix DM bufio's shrinker to reclaim more than one buffer per scan.
* tag 'for-4.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm bufio: fix shrinker scans when (nr_to_scan < retain_target)
dm mpath: fix bio-based multipath queue_if_no_path handling
dm: fix various targets to dm_register_target after module __init resources created
dm table: fix regression from improper dm_dev_internal.count refcount_t conversion
__send_changing_extent_only() must follow the same pattern that was
established with commit "dm: ensure bio submission follows a depth-first
tree walk". That is: submit first bio up to split boundary and then
split the remainder to further submissions.
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
alloc_multiple_bios() assumes it can allocate the requested number of
bios but until now there was no gaurantee that the mempools would be
accomodating.
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Now that all of DM has been revised and/or verified to no longer require
the use of BIOSET_NEED_RESCUER the dm_offload code may be removed.
Suggested-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM targets can request multiple bios be sent to them by DM core (see:
num_{flush,discard,write_same,write_zeroes}_bios). But until now these
bios were allocated in an unsafe manner than could potentially exhaust
the DM device's bioset -- in the face of multiple threads each trying to
do multiple allocations from the same DM device's bioset.
Fix __send_duplicate_bios() by using the new alloc_multiple_bios(). The
allocation strategy used by alloc_multiple_bios() models that used by
dm-crypt.c:crypt_alloc_buffer().
Neil Brown initially proposed this fix but the implementation has been
revised enough that it inappropriate to attribute the entirety of it to
him.
Suggested-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
No DM target provides num_write_bios and none has since dm-cache's
brief use in 2013.
Having the possibility of num_write_bios > 1 complicates bio
allocation. So remove the interface and assume there is only one bio
needed.
If a target ever needs more, it must provide a suitable bioset and
allocate itself based on its particular needs.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
A dm device can, in general, represent a tree of targets, each of which
handles a sub-range of the range of blocks handled by the parent.
The bio sequencing managed by generic_make_request() requires that bios
are generated and handled in a depth-first manner. Each call to a
make_request_fn() may submit bios to a single member device, and may
submit bios for a reduced region of the same device as the
make_request_fn.
In particular, any bios submitted to member devices must be expected to
be processed in order, so a later one must never wait for an earlier
one.
This ordering is usually achieved by using bio_split() to reduce a bio
to a size that can be completely handled by one target, and resubmitting
the remainder to the originating device. bio_queue_split() shows the
canonical approach.
dm doesn't follow this approach, largely because it has needed to split
bios since long before bio_split() was available. It currently can
submit bios to separate targets within the one dm_make_request() call.
Dependencies between these targets, as can happen with dm-snap, can
cause deadlocks if either bios gets stuck behind the other in the queues
managed by generic_make_request(). This requires the 'rescue'
functionality provided by dm_offload_{start,end}.
Some of this requirement can be removed by changing the order of bio
submission to follow the canonical approach. That is, if dm finds that
it needs to split a bio, the remainder should be sent to
generic_make_request() rather than being handled immediately. This
delays the handling until the first part is completely processed, so the
deadlock problems do not occur.
__split_and_process_bio() can be called both from dm_make_request() and
from dm_wq_work(). When called from dm_wq_work() the current approach
is perfectly satisfactory as each bio will be processed immediately.
When called from dm_make_request(), current->bio_list will be non-NULL,
and in this case it is best to create a separate "clone" bio for the
remainder.
When we use bio_clone_bioset() to split off the front part of a bio
and chain the two together and submit the remainder to
generic_make_request(), it is important that the newly allocated
bio is used as the head to be processed immediately, and the original
bio gets "bio_advance()"d and sent to generic_make_request() as the
remainder. Otherwise, if the newly allocated bio is used as the
remainder, and if it then needs to be split again, then the next
bio_clone_bioset() call will be made while holding a reference a bio
(result of the first clone) from the same bioset. This can potentially
exhaust the bioset mempool and result in a memory allocation deadlock.
Note that there is no race caused by reassigning cio.io->bio after already
calling __map_bio(). This bio will only be dereferenced again after
dec_pending() has found io->io_count to be zero, and this cannot happen
before the dec_pending() call at the end of __split_and_process_bio().
To provide the clone bio when splitting, we use q->bio_split. This
was previously being freed by bio-based dm to avoid having excess
rescuer threads. As bio_split bio sets no longer create rescuer
threads, there is little cost and much gain from restoring the
q->bio_split bio set.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The BIOSET_NEED_RESCUER flag is only needed when a make_request_fn might
do two allocations from the one bioset, and the second one could block
until the first bio completes.
dm_io() is called from make_request_fn() context. The closest it comes
to multiple allocations is in chunk_io() in dm-snap-persistent. But
there the code uses a separate thread to avoid problems.
So BIOSET_NEED_RESCUER is not needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The BIOSET_NEED_RESCUER flag is only needed when a make_request_fn might
do two allocations from the one bioset, and the second one could block
until the first bio completes.
dm-crypt does allocate from this bioset inside the dm make_request_fn,
but does so using GFP_NOWAIT so that the allocation will not block.
So BIOSET_NEED_RESCUER is not needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Clarify that dm_accept_partial_bio isn't allowed for REQ_OP_ZONE_RESET
bios.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
No need to calculate the reshaping progress because
mddev->curr_resync_completed holds it.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
During reshape, 'A' chars were reported in status rather than 'a'.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In order to avoid redoing synchronization/recovery/reshape partially,
the raid set got frozen until after all passed in table line flags had
been cleared. The related table reload sequence had to be precisely
followed, or reshaping may lead to data corruption caused by the active
mapping carrying on with a reshape when the inactive mapping already
had retrieved a stale reshape position.
Harden by retrieving the actual resync/recovery/reshape position
during resume whilst the active table is suspended thus avoiding
to keep the raid set frozen altogether. This prevents superfluous
redoing of an already resynchronized or recovered segment and,
most importantly, potential for redoing of an already reshaped
segment causing data corruption.
Fixes: d39f0010e ("dm raid: fix raid_resume() to keep raid set frozen as needed")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Verifying the current raid sets redundancy based on retrieved
superblock content has to use the superblock's raid level (e.g. raid0),
not the constructor requested one (e.g. raid10).
Using the requested raid level of raid10 lead to a "divide error"
on raid0 which defines data copies divided by to be zero.
Also check for bogus data copies.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If you prepare_to_wait() after a previous prepare_to_wait(),
but before calling schedule(), you get warning:
do not call blocking ops when !TASK_RUNNING; state=2
This is appropriate as it is often a bug. The event that the
first prepare_to_wait() expects might wake up the schedule following
the second prepare_to_wait(), which could be confusing.
However if both prepare_to_wait()s are part of simple wait_event()
loops, and if the inner one is rarely called, then there is
no problem. The inner loop is too simple to get confused by
a stray wakeup, and the outer loop won't spin unduly because the
inner doesnt affect it often.
This pattern occurs in both raid1.c and raid10.c in the use of
flush_pending_writes().
The warning can be silenced by setting current->state to TASK_RUNNING.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In do_md_run(), md threads should not wake up until the array is fully
initialized in md_run(). However, in raid5_run(), raid5-cache may wake
up mddev->thread to flush stripes that need to be written back. This
design doesn't break badly right now. But it could lead to bad bug in
the future.
This patch tries to resolve this problem by splitting start up work
into two personality functions, run() and start(). Tasks that do not
require the md threads should go into run(), while task that require
the md threads go into start().
r5l_load_log() is moved to raid5_start(), so it is not called until
the md threads are started in do_md_run().
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Move raid_resume()'s setting of 'rw' and 'in_sync' to just prior to
mddev_resume().
Also, remove unused 'bitmap_loaded' member from "struct raid_set".
No functional changes.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix various sync state issues causing racy/bogus sync ratio,
sync_action ad health chars in dm_status() info output.
Sync ratio could be N/N (i.e. 100%) shortly after raid set
creation, i.e. creating a new RaidLV or upconverting a linear LV to
raid1 thus:
"0 2097152 raid raid1 2 Aa 2097162/2097152 recover 0 0 -"
instead of:
"0 2097152 raid raid1 2 Aa 0/2097152 idle 0 0 -"
Sync action could be non-idle, when the MD thread was done with io.
Health chars could be 'A' when they should be 'a' for a short time
before a resynchonization started.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The raid_status() function passes the bool array_in_sync variable around
providing synchronization state of the MD array. Replace it with a
runtime flag. This will avoid a pattern of having to pass discrete
variables to various functions.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The MD sync thread updates recovery flags providing state of any
running, idle, frozen, recovering, reshaping, ... activity it performs
and updates respective flags asynchronously versus dm processing
raid_status(). To close that race window, take a single copy of the
flags and pass it into its callees.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
During a reshape request: if userspace reloads a "raid" table multiple
times, resulting in multiple superblock reads, the raid set needs to
stay frozen until all config changes (chunk size, layout data_offset,
delta_disks) have been stored in the superblocks and respective flags
cleared.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Check all component data device sizes versus calculated size.
Reject if device(s) are too small. Otherwise, MD will fail the
operation by accessing beyond the end of the data device.
An example use-case is that growing bitmap won't fit any more and the MD
runtime will report an error when DM raid should catch this earlier.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The raid set size is being revalidated unconditionally before a
reshaping conversion is started. MD requires the size to only be
reduced in case of a stripe removing (i.e. shrinking) reshape but not
when growing because the raid array has to stay small until after the
growing reshape finishes.
Fix by avoiding the size revalidation in preresume unless a shrinking
reshape is requested.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pay attention to existing reshape space to define if a raid set needs
resizing. Otherwise we can hit "Can't resize a reshaping raid set"
when a reshape is being requested.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The md raid personalities call md_finish_reshape() at the end of a
reshape conversion which adjusts rdev->sectors.
Correct/check rdev->sectors before initiating a reshape and raise the
recovery pointer accordingly.
Otherwise, the DM raid coordinated reshape will fail.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
md_stop_writes() is called in raid_presuspend() causing deadlocks on
bios submitted afterwards -- which happens on loaded raid sets with
conversion requests.
Fix by moving md_stop_writes() to raid_postsuspend(). NOTE: when the
recovery's frozen (MD_RECOVERY_FROZEN), writes haven't been started (or
are already stopped) so don't stop them again.
Also remove superfluous readonly setting.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When system is under memory pressure it is observed that dm bufio
shrinker often reclaims only one buffer per scan. This change fixes
the following two issues in dm bufio shrinker that cause this behavior:
1. ((nr_to_scan - freed) <= retain_target) condition is used to
terminate slab scan process. This assumes that nr_to_scan is equal
to the LRU size, which might not be correct because do_shrink_slab()
in vmscan.c calculates nr_to_scan using multiple inputs.
As a result when nr_to_scan is less than retain_target (64) the scan
will terminate after the first iteration, effectively reclaiming one
buffer per scan and making scans very inefficient. This hurts vmscan
performance especially because mutex is acquired/released every time
dm_bufio_shrink_scan() is called.
New implementation uses ((LRU size - freed) <= retain_target)
condition for scan termination. LRU size can be safely determined
inside __scan() because this function is called after dm_bufio_lock().
2. do_shrink_slab() uses value returned by dm_bufio_shrink_count() to
determine number of freeable objects in the slab. However dm_bufio
always retains retain_target buffers in its LRU and will terminate
a scan when this mark is reached. Therefore returning the entire LRU size
from dm_bufio_shrink_count() is misleading because that does not
represent the number of freeable objects that slab will reclaim during
a scan. Returning (LRU size - retain_target) better represents the
number of freeable objects in the slab. This way do_shrink_slab()
returns 0 when (LRU size < retain_target) and vmscan will not try to
scan this shrinker avoiding scans that will not reclaim any memory.
Test: tested using Android device running
<AOSP>/system/extras/alloc-stress that generates memory pressure
and causes intensive shrinker scans
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit ca5beb76 ("dm mpath: micro-optimize the hot path relative to
MPATHF_QUEUE_IF_NO_PATH") caused bio-based DM-multipath to fail mptest's
"test_02_sdev_delete".
Restoring the logic that existed prior to commit ca5beb76 fixes this
bio-based DM-multipath regression. Also verified all mptest tests pass
with request-based DM-multipath.
This commit effectively reverts commit ca5beb76 -- but it does so
without reintroducing the need to take the m->lock spinlock in
must_push_back_{rq,bio}.
Fixes: ca5beb76 ("dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
A NULL pointer is seen if two concurrent "vgchange -ay -K <vg name>"
processes race to load the dm-thin-pool module:
PID: 25992 TASK: ffff883cd7d23500 CPU: 4 COMMAND: "vgchange"
#0 [ffff883cd743d600] machine_kexec at ffffffff81038fa9
0000001 [ffff883cd743d660] crash_kexec at ffffffff810c5992
0000002 [ffff883cd743d730] oops_end at ffffffff81515c90
0000003 [ffff883cd743d760] no_context at ffffffff81049f1b
0000004 [ffff883cd743d7b0] __bad_area_nosemaphore at ffffffff8104a1a5
0000005 [ffff883cd743d800] bad_area at ffffffff8104a2ce
0000006 [ffff883cd743d830] __do_page_fault at ffffffff8104aa6f
0000007 [ffff883cd743d950] do_page_fault at ffffffff81517bae
0000008 [ffff883cd743d980] page_fault at ffffffff81514f95
[exception RIP: kmem_cache_alloc+108]
RIP: ffffffff8116ef3c RSP: ffff883cd743da38 RFLAGS: 00010046
RAX: 0000000000000004 RBX: ffffffff81121b90 RCX: ffff881bf1e78cc0
RDX: 0000000000000000 RSI: 00000000000000d0 RDI: 0000000000000000
RBP: ffff883cd743da68 R8: ffff881bf1a4eb00 R9: 0000000080042000
R10: 0000000000002000 R11: 0000000000000000 R12: 00000000000000d0
R13: 0000000000000000 R14: 00000000000000d0 R15: 0000000000000246
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
0000009 [ffff883cd743da70] mempool_alloc_slab at ffffffff81121ba5
0000010 [ffff883cd743da80] mempool_create_node at ffffffff81122083
0000011 [ffff883cd743dad0] mempool_create at ffffffff811220f4
0000012 [ffff883cd743dae0] pool_ctr at ffffffffa08de049 [dm_thin_pool]
0000013 [ffff883cd743dbd0] dm_table_add_target at ffffffffa0005f2f [dm_mod]
0000014 [ffff883cd743dc30] table_load at ffffffffa0008ba9 [dm_mod]
0000015 [ffff883cd743dc90] ctl_ioctl at ffffffffa0009dc4 [dm_mod]
The race results in a NULL pointer because:
Process A (vgchange -ay -K):
a. send DM_LIST_VERSIONS_CMD ioctl;
b. pool_target not registered;
c. modprobe dm_thin_pool and wait until end.
Process B (vgchange -ay -K):
a. send DM_LIST_VERSIONS_CMD ioctl;
b. pool_target registered;
c. table_load->dm_table_add_target->pool_ctr;
d. _new_mapping_cache is NULL and panic.
Note:
1. process A and process B are two concurrent processes.
2. pool_target can be detected by process B but
_new_mapping_cache initialization has not ended.
To fix dm-thin-pool, and other targets (cache, multipath, and snapshot)
with the same problem, simply dm_register_target() after all resources
created during module init (as labelled with __init) are finished.
Cc: stable@vger.kernel.org
Signed-off-by: monty <monty_pavel@sina.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Multiple refcounts are needed if the device was already added. The
micro-optimization of setting the refcount to 1 on first added (rather
than fall thru to a common refcount_inc) lost sight of the fact that the
refcount_inc is also needed for the case when the device already exists
and the mode need not be upgraded.
Fixes: 2a0b4682e0 ("dm: convert dm_dev_internal.count from atomic_t to refcount_t")
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There is a small window near the end of md_do_sync where mddev->curr_resync
can be equal to MaxSector.
If status_resync is called during this window, the resulting /proc/mdstat
output contains a HUGE number of = signs due to the very large curr_resync:
Personalities : [raid1]
md123 : active raid1 sdd3[2] sdb3[0]
204736 blocks super 1.0 [2/1] [U_]
[=====================================================================
... (82 MB more) ...
================>] recovery =429496729.3% (9223372036854775807/204736)
finish=0.2min speed=12796K/sec
bitmap: 0/1 pages [0KB], 65536KB chunk
Modify status_resync to ensure the resync variable doesn't exceed
the array's max_sectors.
Signed-off-by: Nate Dailey <nate.dailey@stratus.com>
Acked-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
r5c_journal_mode_set() is called by r5c_journal_mode_store() and
raid_ctr() in dm-raid. We don't need mddev_lock() when calling from
raid_ctr(). This patch fixes this by moves the mddev_lock() to
r5c_journal_mode_store().
Cc: stable@vger.kernel.org (v4.13+)
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
When disk failure occurs on new disks for reshape, mddev->degraded
is not calculated correctly. Faulty bit of the failure device is not
set before raid5_calc_degraded(conf).
mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop[012]
mdadm /dev/md0 -a /dev/loop3
mdadm /dev/md0 --grow -n4
mdadm /dev/md0 -f /dev/loop3 # simulating disk failure
cat /sys/block/md0/md/degraded # it outputs 0, but it should be 1.
However, mdadm -D /dev/md0 will show that it is degraded. It's a bug.
It can be fixed by moving the resources raid5_calc_degraded() depends
on before it.
Reported-by: Roy Chung <roychung@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
register_shrinker is now __must_check, so check it to kill a warning.
Caller of bch_btree_cache_alloc in super.c appropriately checks return
value so this is fully plumbed through.
This V2 fixes checkpatch warnings and improves the commit description,
as I was too hasty getting the previous version out.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we send a read request and hit the clean data in cache device, there
is a situation called cache read race in bcache(see the commit in the tail
of cache_look_up(), the following explaination just copy from there):
The bucket we're reading from might be reused while our bio is in flight,
and we could then end up reading the wrong data. We guard against this
by checking (in bch_cache_read_endio()) if the pointer is stale again;
if so, we treat it as an error (s->iop.error = -EINTR) and reread from
the backing device (but we don't pass that error up anywhere)
It should be noted that cache read race happened under normal
circumstances, not the circumstance when SSD failed, it was counted
and shown in /sys/fs/bcache/XXX/internal/cache_read_races.
Without this patch, when we use writeback mode, we will never reread from
the backing device when cache read race happened, until the whole cache
device is clean, because the condition
(s->recoverable && (dc && !atomic_read(&dc->has_dirty))) is false in
cached_dev_read_error(). In this situation, the s->iop.error(= -EINTR)
will be passed up, at last, user will receive -EINTR when it's bio end,
this is not suitable, and wield to up-application.
In this patch, we use s->read_dirty_data to judge whether the read
request hit dirty data in cache device, it is safe to reread data from
the backing device when the read request hit clean data. This can not
only handle cache read race, but also recover data when failed read
request from cache device.
[edited by mlyle to fix up whitespace, commit log title, comment
spelling]
Fixes: d59b237959 ("bcache: only permit to recovery read error when cache device is clean")
Cc: <stable@vger.kernel.org> # 4.14
Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch try to fix the building error on MIPS. The reason is MIPS
has already defined the PTR macro, which conflicts with the PTR macro
in include/uapi/linux/bcache.h.
[fixed by mlyle: corrected a line-length issue]
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Journal bucket is a circular buffer, the bucket
can be like YYYNNNYY, which means the first valid journal in
the 7th bucket, and the latest valid journal in third bucket, in
this case, if we do not try we the zero index first, We
may get a valid journal in the 7th bucket, then we call
find_next_bit(bitmap,ca->sb.njournal_buckets, l + 1) to get the
first invalid bucket after the 7th bucket, because all these
buckets is valid, so no bit 1 in bitmap, thus find_next_bit()
function would return with ca->sb.njournal_buckets (8). So, after
that, bcache only read journal in 7th and 8the bucket,
the first to the third buckets are lost.
So, it is important to let developer know that, we need to try
the zero index at first in the hash-search, and avoid any breaks
in future's code modification.
[ML: Fixed whitespace & formatting & file permissions]
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull more block layer updates from Jens Axboe:
"A followup pull request, with some parts that either needed a bit more
testing before going in, merge sync, or just later arriving fixes.
This contains:
- Timer related updates from Kees. These were purposefully delayed
since I didn't want to pull in a later v4.14-rc tag to my block
tree.
- ide-cd prep sense buffer fix from Bart. Also delayed, as not to
clash with the late fix we put into 4.14-rc.
- Small BFQ updates series from Luca and Paolo.
- Single nvmet fix from James, fixing a non-functional case there.
- Bio fast clone fix from Michael, which made bcache return the wrong
data for some cases.
- Legacy IO path regression hang fix from Ming"
* 'for-linus' of git://git.kernel.dk/linux-block:
bio: ensure __bio_clone_fast copies bi_partno
nvmet_fc: fix better length checking
block: wake up all tasks blocked in get_request()
block, bfq: move debug blkio stats behind CONFIG_DEBUG_BLK_CGROUP
block, bfq: update blkio stats outside the scheduler lock
block, bfq: add missing invocations of bfqg_stats_update_io_add/remove
doc, block, bfq: update max IOPS sustainable with BFQ
ide: Make ide_cdrom_prep_fs() initialize the sense buffer pointer
md: Convert timers to use timer_setup()
block: swim3: Convert timers to use timer_setup()
block/aoe: Convert timers to use timer_setup()
amifloppy: Convert timers to use timer_setup()
block/floppy: Convert callback to pass timer_list
isn't _really_ an error
- A DM core @stable fix for discard support that was enabled for an
entire DM device despite only having partial support for discards due
to a mix of discard capabilities across the underlying devices.
- A couple other DM core discard fixes.
- A DM bufio @stable fix that resolves a 32-bit overflow
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaDglsAAoJEMUj8QotnQNaaFwIAMLjV27BYtHBYWnvMlROiXAD
2aPSEoGHEGcq6BQyTlXyew1CNl0xXOcb8KMFhQMR/IjPuKyLl47OXbavE3TIwVoT
Lw+XUvXUuxK1Qd34fUvPoPd94w1aJBoY9Wlv5YxCp+U0WQ2SH3kHo/FOFvLPJ6wY
OhHZiByGvxXWc8tso86zx0pq6j5Nghk18D2lQvaGU28BtElfWE3/xoDr6FrwDqEb
MvzmUMKs/M5EoJt3HT4SNDFqujkCP69PGjqpHxV9mFT8HaonX+MF61Kr96/Tc6cO
c+DOkw7kaqnjJsrdKu3KIdtXf3cyoHYqtExXRdzap8QoCQvosNR4r78svcfY0i8=
=QKXY
-----END PGP SIGNATURE-----
Merge tag 'for-4.15/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull more device mapper updates from Mike Snitzer:
"Given your expected travel I figured I'd get these fixes to you sooner
rather than later.
- a DM multipath stable@ fix to silence an annoying error message
that isn't _really_ an error
- a DM core @stable fix for discard support that was enabled for an
entire DM device despite only having partial support for discards
due to a mix of discard capabilities across the underlying devices.
- a couple other DM core discard fixes.
- a DM bufio @stable fix that resolves a 32-bit overflow"
* tag 'for-4.15/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm bufio: fix integer overflow when limiting maximum cache size
dm: clear all discard attributes in queue_limits when discards are disabled
dm: do not set 'discards_supported' in targets that do not need it
dm: discard support requires all targets in a table support discards
dm mpath: remove annoying message of 'blk_get_request() returned -11'
The default max_cache_size_bytes for dm-bufio is meant to be the lesser
of 25% of the size of the vmalloc area and 2% of the size of lowmem.
However, on 32-bit systems the intermediate result in the expression
(VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100
overflows, causing the wrong result to be computed. For example, on a
32-bit system where the vmalloc area is 520093696 bytes, the result is
1174405 rather than the expected 130023424, which makes the maximum
cache size much too small (far less than 2% of lowmem). This causes
severe performance problems for dm-verity users on affected systems.
Fix this by using mult_frac() to correctly multiply by a percentage. Do
this for all places in dm-bufio that multiply by a percentage. Also
replace (VMALLOC_END - VMALLOC_START) with VMALLOC_TOTAL, which contrary
to the comment is now defined in include/linux/vmalloc.h.
Depends-on: 9993bc635 ("sched/x86: Fix overflow in cyc2ns_offset")
Fixes: 95d402f057 ("dm: add bufio")
Cc: <stable@vger.kernel.org> # v3.2+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Otherwise, it can happen that the QUEUE_FLAG_DISCARD isn't set but the
various discard attributes (which get exposed via sysfs) may be set.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The DM target's 'discards_supported' flag is intended to act as an
override. Meaning, even if the underlying storage doesn't support
discards the DM target will.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
A DM device with a mix of discard capabilities (due to some underlying
devices not having discard support) _should_ just return -EOPNOTSUPP for
the region of the device that doesn't support discards (even if only by
way of the underlying driver formally not supporting discards). BUT,
that does ask the underlying driver to handle something that it never
advertised support for. In doing so we're exposing users to the
potential for a underlying disk driver hanging if/when a discard is
issued a the device that is incapable and never claimed to support
discards.
Fix this by requiring that each DM target in a DM table provide discard
support as a prereq for a DM device to advertise support for discards.
This may cause some configurations that were happily supporting discards
(even in the face of a mix of discard support) to stop supporting
discards -- but the risk of users hitting driver hangs, and forced
reboots, outweighs supporting those fringe mixed discard
configurations.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
It is very normal to see allocation failure, especially with blk-mq
request_queues, so it's unnecessary to report this error and annoy
people.
In practice this 'blk_get_request() returned -11' error gets logged
quite frequently when a blk-mq DM multipath device sees heavy IO.
This change is marked for stable@ because the annoying message in
question was included in stable@ commit 7083abbbf.
Fixes: 7083abbbf ("dm mpath: avoid that path removal can trigger an infinite loop")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABCgAGBQJaDCyzAAoJEMBFfjjOO8FyaYQP/AwHBy6XmwwVlWDP4BqIF6hL
Vhy3ccVLYEORvePv68tWSRPUz5n6+1Ebqanmwtkw6i8l+KwxY2SfkZql09cARc33
2iBE4bHF98iWQmnJbF6me80fedY9n5bZJNMQKEF9VozJWwTMOTQFTCfmyJRDBmk9
iidQj6M3idbSUOYIJjvc40VGx5NyQWSr+FFfqsz1rU5iLGRGEvA3I2/CDT0oTuV6
D4MmFxzE2Tv/vIMa2GzKJ1LGScuUfSjf93Lq9Kk0cG36qWao8l930CaXyVdE9WJv
bkUzpf3QYv/rDX6QbAGA0cada13zd+dfBr8YhchclEAfJ+GDLjMEDu04NEmI6KUT
5lP0Xw0xYNZQI7bkdxDMhsj5jaz/HJpXCjPCtZBnSEKiL4OPXVMe+pBHoCJ2/yFN
6M716XpWYgUviUOdiE+chczB5p3z4FA6u2ykaM4Tlk0btZuHGxjcSWwvcIdlPmjm
kY4AfDV6K0bfEBVguWPJicvrkx44atqT5nWbbPhDwTSavtsuRJLb3GCsHedx7K8h
ZO47lCQFAWCtrycK1HYw+oupNC3hYWQ0SR42XRdGhL1bq26C+1sei1QhfqSgA9PQ
7CwWH4UTOL9fhtrzSqZngYOh9sjQNFNefqQHcecNzcEjK2vjrgQZvRNWZKHSwaFs
fbGX8juZWP4ypbK+irTB
=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: linux-bcache@vger.kernel.org
Cc: linux-raid@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
CORE:
- Fix the semantics of raw GPIO to actually be raw. No
inversion semantics as before, but also no open draining,
and allow the raw operations to affect lines used for
interrupts as the caller supposedly knows what they are
doing if they are getting the big hammer.
- Rewrote the __inner_function() notation calls to names that
make more sense. I just find this kind of code disturbing.
- Drop the .irq_base() field from the gpiochip since now all
IRQs are mapped dynamically. This is nice.
- Support for .get_multiple() in the core driver API. This
allows us to read several GPIO lines with a single
register read. This has high value for some usecases: it
can be used to create oscilloscopes and signal analyzers
and other things that rely on reading several lines at
exactly the same instant. Also a generally nice
optimization. This uses the new assign_bit() macro from
the bitops lib that was ACKed by Andrew Morton and
is implemented for two drivers, one of them being the
generic MMIO driver so everyone using that will be able
to benefit from this.
- Do not allow requests of Open Drain and Open Source
setting of a GPIO line simultaneously. If the hardware
actually supports enabling both at the same time the
electrical result would be disastrous.
- A new interrupt chip core helper. This will be helpful
to deal with "banked" GPIOs, which means GPIO controllers
with several logical blocks of GPIO inside them. This
is several gpiochips per device in the device model, in
contrast to the case when there is a 1-to-1 relationship
between a device and a gpiochip.
NEW DRIVERS:
- Maxim MAX3191x industrial serializer, a very interesting
piece of professional I/O hardware.
- Uniphier GPIO driver. This is the GPIO block from the
recent Socionext (ex Fujitsu and Panasonic) platform.
- Tegra 186 driver. This is based on the new banked GPIO
infrastructure.
OTHER IMPROVEMENTS:
- Some documentation improvements.
- Wakeup support for the DesignWare DWAPB GPIO controller.
- Reset line support on the DesignWare DWAPB GPIO controller.
- Several non-critical bug fixes and improvements for the
Broadcom BRCMSTB driver.
- Misc non-critical bug fixes like exotic errorpaths, removal
of dead code etc.
- Explicit comments on fall-through switch() statements.
-----BEGIN PGP SIGNATURE-----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=8Mon
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.15 kernel cycle:
Core:
- Fix the semantics of raw GPIO to actually be raw. No inversion
semantics as before, but also no open draining, and allow the raw
operations to affect lines used for interrupts as the caller
supposedly knows what they are doing if they are getting the big
hammer.
- Rewrote the __inner_function() notation calls to names that make
more sense. I just find this kind of code disturbing.
- Drop the .irq_base() field from the gpiochip since now all IRQs are
mapped dynamically. This is nice.
- Support for .get_multiple() in the core driver API. This allows us
to read several GPIO lines with a single register read. This has
high value for some usecases: it can be used to create
oscilloscopes and signal analyzers and other things that rely on
reading several lines at exactly the same instant. Also a generally
nice optimization. This uses the new assign_bit() macro from the
bitops lib that was ACKed by Andrew Morton and is implemented for
two drivers, one of them being the generic MMIO driver so everyone
using that will be able to benefit from this.
- Do not allow requests of Open Drain and Open Source setting of a
GPIO line simultaneously. If the hardware actually supports
enabling both at the same time the electrical result would be
disastrous.
- A new interrupt chip core helper. This will be helpful to deal with
"banked" GPIOs, which means GPIO controllers with several logical
blocks of GPIO inside them. This is several gpiochips per device in
the device model, in contrast to the case when there is a 1-to-1
relationship between a device and a gpiochip.
New drivers:
- Maxim MAX3191x industrial serializer, a very interesting piece of
professional I/O hardware.
- Uniphier GPIO driver. This is the GPIO block from the recent
Socionext (ex Fujitsu and Panasonic) platform.
- Tegra 186 driver. This is based on the new banked GPIO
infrastructure.
Other improvements:
- Some documentation improvements.
- Wakeup support for the DesignWare DWAPB GPIO controller.
- Reset line support on the DesignWare DWAPB GPIO controller.
- Several non-critical bug fixes and improvements for the Broadcom
BRCMSTB driver.
- Misc non-critical bug fixes like exotic errorpaths, removal of dead
code etc.
- Explicit comments on fall-through switch() statements"
* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
gpio: tegra186: Remove tegra186_gpio_lock_class
gpio: rcar: Add r8a77995 (R-Car D3) support
pinctrl: bcm2835: Fix some merge fallout
gpio: Fix undefined lock_dep_class
gpio: Automatically add lockdep keys
gpio: Introduce struct gpio_irq_chip.first
gpio: Disambiguate struct gpio_irq_chip.nested
gpio: Add Tegra186 support
gpio: Export gpiochip_irq_{map,unmap}()
gpio: Implement tighter IRQ chip integration
gpio: Move lock_key into struct gpio_irq_chip
gpio: Move irq_valid_mask into struct gpio_irq_chip
gpio: Move irq_nested into struct gpio_irq_chip
gpio: Move irq_chained_parent to struct gpio_irq_chip
gpio: Move irq_default_type to struct gpio_irq_chip
gpio: Move irq_handler to struct gpio_irq_chip
gpio: Move irqdomain into struct gpio_irq_chip
gpio: Move irqchip into struct gpio_irq_chip
gpio: Introduce struct gpio_irq_chip
pinctrl: armada-37xx: remove unused variable
...
Pull MD update from Shaohua Li:
"This update mostly includes bug fixes:
- md-cluster now supports raid10 from Guoqing
- raid5 PPL fixes from Artur
- badblock regression fix from Bo
- suspend hang related fixes from Neil
- raid5 reshape fixes from Neil
- raid1 freeze deadlock fix from Nate
- memleak fixes from Zdenek
- bitmap related fixes from Me and Tao
- other fixes and cleanups"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (33 commits)
md: free unused memory after bitmap resize
md: release allocated bitset sync_set
md/bitmap: clear BITMAP_WRITE_ERROR bit before writing it to sb
md: be cautious about using ->curr_resync_completed for ->recovery_offset
badblocks: fix wrong return value in badblocks_set if badblocks are disabled
md: don't check MD_SB_CHANGE_CLEAN in md_allow_write
md-cluster: update document for raid10
md: remove redundant variable q
raid1: remove obsolete code in raid1_write_request
md-cluster: Use a small window for raid10 resync
md-cluster: Suspend writes in RAID10 if within range
md-cluster/raid10: set "do_balance = 0" if area is resyncing
md: use lockdep_assert_held
raid1: prevent freeze_array/wait_all_barriers deadlock
md: use TASK_IDLE instead of blocking signals
md: remove special meaning of ->quiesce(.., 2)
md: allow metadata update while suspending.
md: use mddev_suspend/resume instead of ->quiesce()
md: move suspend_hi/lo handling into core md code
md: don't call bitmap_create() while array is quiesced.
...
- A DM core fix for a race during device destruction that could result
in a BUG_ON.
- A stable@ fix for a DM cache race condition that could lead to data
corruption when operating in writeback mode (writethrough is default)
- Various DM cache cleanups and improvements
- Add DAX support to the DM log-writes target
- A fix for the DM zoned target's ability to deal with the last zone of
the drive being smaller than all others.
- A stable@ DM crypt and DM integrity fix for a negative check that was
to restrictive (prevented slab debug with XFS ontop of DM crypt from
working).
- A DM raid target fix for a panic that can occur when forcing a raid to
sync.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaCdOnAAoJEMUj8QotnQNaEYIIANZ2wyrvrJ/6xeOu2qNII07o
FYnvVvm0D4rDnNVgYbf/FHWRkFYzeNPkKH6Kp38XC+Ag5xeLjkepQG/ivxXrp9eg
2t6rjUDnUdjgqIQlmysbla+DgphampTVlPMpnafxKiSLItSjf+2tu1mLqtITVjT1
mo81ZRbKRSYBPvaUzHWUJ910ap+WPCpwTpO98uPQE1wogLEKTAf90U2hfsy51Gd6
4xStLahdiiGst7zs67uWG5l6g3kR3RnfNVN38oERrq67oxG4GAU1xUPRwlCnJmbx
waDhlhVjguVDFJh/HYAyBIVls38iGrroox70MmtpmitDYnMs8twrgWcsI6Ozo1c=
=ZfYD
-----END PGP SIGNATURE-----
Merge tag 'for-4.15/dm' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- a few conversions from atomic_t to ref_count_t
- a DM core fix for a race during device destruction that could result
in a BUG_ON
- a stable@ fix for a DM cache race condition that could lead to data
corruption when operating in writeback mode (writethrough is default)
- various DM cache cleanups and improvements
- add DAX support to the DM log-writes target
- a fix for the DM zoned target's ability to deal with the last zone of
the drive being smaller than all others
- a stable@ DM crypt and DM integrity fix for a negative check that was
to restrictive (prevented slab debug with XFS ontop of DM crypt from
working)
- a DM raid target fix for a panic that can occur when forcing a raid
to sync
* tag 'for-4.15/dm' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (25 commits)
dm cache: lift common migration preparation code to alloc_migration()
dm cache: remove usused deferred_cells member from struct cache
dm cache policy smq: allocate cache blocks in order
dm cache policy smq: change max background work from 10240 to 4096 blocks
dm cache background tracker: limit amount of background work that may be issued at once
dm cache policy smq: take origin idle status into account when queuing writebacks
dm cache policy smq: handle races with queuing background_work
dm raid: fix panic when attempting to force a raid to sync
dm integrity: allow unaligned bv_offset
dm crypt: allow unaligned bv_offset
dm: small cleanup in dm_get_md()
dm: fix race between dm_get_from_kobject() and __dm_destroy()
dm: allocate struct mapped_device with kvzalloc
dm zoned: ignore last smaller runt zone
dm space map metadata: use ARRAY_SIZE
dm log writes: add support for DAX
dm log writes: add support for inline data buffers
dm cache: simplify get_per_bio_data() by removing data_size argument
dm cache: remove all obsolete writethrough-specific code
dm cache: submit writethrough writes in parallel to origin and cache
...
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
Previously, cache blocks were being allocated in reverse order. Fix
this by pulling the block off the head of the free list.
Shouldn't have any impact on performance or latency but it is more
correct to have the cache blocks allocated/mapped in ascending order.
This fix will slightly increase the chances of two adjacent oblocks
being in adjacent cblocks.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
10240 blocks was too much, lowering this reduces the latency of copying
and consumes less memory.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
On large systems the cache policy can be over enthusiastic and queue far
too much dirty data to be written back. This consumes memory.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If the origin device is idle try and writeback more data.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The background_tracker holds a set of promotions/demotions that the
cache policy wishes the core target to implement.
When adding a new operation to the tracker it's possible that an
operation on the same block is already present (but in practise this
doesn't appear to be happening). Catch these situations and do the
appropriate cleanup.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Requesting a sync on an active raid device via a table reload
(see 'sync' parameter in Documentation/device-mapper/dm-raid.txt)
skips the super_load() call that defines the superblock size
(rdev->sb_size) -- resulting in an oops if/when super_sync()->memset()
is called.
Fix by moving the initialization of the superblock start and size
out of super_load() to the caller (analyse_superblocks).
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When slub_debug is enabled kmalloc returns unaligned memory. XFS uses
this unaligned memory for its buffers (if an unaligned buffer crosses a
page, XFS frees it and allocates a full page instead - see the function
xfs_buf_allocate_memory).
dm-integrity checks if bv_offset is aligned on page size and this check
fail with slub_debug and XFS.
Fix this bug by removing the bv_offset check, leaving only the check for
bv_len.
Fixes: 7eada909bf ("dm: add integrity target")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Bruno Prémont <bonbons@sysophe.eu>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When slub_debug is enabled kmalloc returns unaligned memory. XFS uses
this unaligned memory for its buffers (if an unaligned buffer crosses a
page, XFS frees it and allocates a full page instead - see the function
xfs_buf_allocate_memory).
dm-crypt checks if bv_offset is aligned on page size and these checks
fail with slub_debug and XFS.
Fix this bug by removing the bv_offset checks. Switch to checking if
bv_len is aligned instead of bv_offset (this check should be sufficient
to prevent overruns if a bio with too small bv_len is received).
Fixes: 8f0009a225 ("dm crypt: optionally support larger encryption sector size")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Bruno Prémont <bonbons@sysophe.eu>
Tested-by: Bruno Prémont <bonbons@sysophe.eu>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The following BUG_ON was hit when testing repeat creation and removal of
DM devices:
kernel BUG at drivers/md/dm.c:2919!
CPU: 7 PID: 750 Comm: systemd-udevd Not tainted 4.1.44
Call Trace:
[<ffffffff81649e8b>] dm_get_from_kobject+0x34/0x3a
[<ffffffff81650ef1>] dm_attr_show+0x2b/0x5e
[<ffffffff817b46d1>] ? mutex_lock+0x26/0x44
[<ffffffff811df7f5>] sysfs_kf_seq_show+0x83/0xcf
[<ffffffff811de257>] kernfs_seq_show+0x23/0x25
[<ffffffff81199118>] seq_read+0x16f/0x325
[<ffffffff811de994>] kernfs_fop_read+0x3a/0x13f
[<ffffffff8117b625>] __vfs_read+0x26/0x9d
[<ffffffff8130eb59>] ? security_file_permission+0x3c/0x44
[<ffffffff8117bdb8>] ? rw_verify_area+0x83/0xd9
[<ffffffff8117be9d>] vfs_read+0x8f/0xcf
[<ffffffff81193e34>] ? __fdget_pos+0x12/0x41
[<ffffffff8117c686>] SyS_read+0x4b/0x76
[<ffffffff817b606e>] system_call_fastpath+0x12/0x71
The bug can be easily triggered, if an extra delay (e.g. 10ms) is added
between the test of DMF_FREEING & DMF_DELETING and dm_get() in
dm_get_from_kobject().
To fix it, we need to ensure the test of DMF_FREEING & DMF_DELETING and
dm_get() are done in an atomic way, so _minor_lock is used.
The other callers of dm_get() have also been checked to be OK: some
callers invoke dm_get() under _minor_lock, some callers invoke it under
_hash_lock, and dm_start_request() invoke it after increasing
md->open_count.
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The structure srcu_struct can be very big, its size is proportional to the
value CONFIG_NR_CPUS. The Fedora kernel has CONFIG_NR_CPUS 8192, the field
io_barrier in the struct mapped_device has 84kB in the debugging kernel
and 50kB in the non-debugging kernel. The large size may result in failure
of the function kzalloc_node.
In order to avoid the allocation failure, we use the function
kvzalloc_node, this function falls back to vmalloc if a large contiguous
chunk of memory is not available. This patch also moves the field
io_barrier to the last position of struct mapped_device - the reason is
that on many processor architectures, short memory offsets result in
smaller code than long memory offsets - on x86-64 it reduces code size by
320 bytes.
Note to stable kernel maintainers - the kernels 4.11 and older don't have
the function kvzalloc_node, you can use the function vzalloc_node instead.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The SCSI layer allows ZBC drives to have a smaller last runt zone. For
such a device, specifying the entire capacity for a dm-zoned target
table entry fails because the specified capacity is not aligned on a
device zone size indicated in the request queue structure of the
device.
Fix this problem by ignoring the last runt zone in the entry length
when seting up the dm-zoned target (ctr method) and when iterating table
entries of the target (iterate_devices method). This allows dm-zoned
users to still easily setup a target using the entire device capacity
(as mandated by dm-zoned) or the aligned capacity excluding the last
runt zone.
While at it, replace direct references to the device queue chunk_sectors
limit with calls to the accessor blk_queue_zone_sectors().
Reported-by: Peter Desnoyers <pjd@ccs.neu.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Now that we have the ability log filesystem writes using a flat buffer, add
support for DAX.
The motivation for this support is the need for an xfstest that can test
the new MAP_SYNC DAX flag. By logging the filesystem activity with
dm-log-writes we can show that the MAP_SYNC page faults are writing out
their metadata as they happen, instead of requiring an explicit
msync/fsync.
Unfortunately we can't easily track data that has been written via
mmap() now that the dax_flush() abstraction was removed by commit
c3ca015fab ("dax: remove the pmem_dax_ops->flush abstraction").
Otherwise we could just treat each flush as a big write, and store the
data that is being synced to media. It may be worthwhile to add the
dax_flush() entry point back, just as a notifier so we can do this
logging.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Currently dm-log-writes supports writing filesystem data via BIOs, and
writing internal metadata from a flat buffer via write_metadata().
For DAX writes, though, we won't have a BIO, but will instead have an
iterator that we'll want to use to fill a flat data buffer.
So, create write_inline_data() which allows us to write filesystem data
using a flat buffer as a source, and wire it up in log_one_block().
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There is only one per_bio_data size now that writethrough-specific data
was removed from the per_bio_data structure.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Now that the writethrough code is much simpler there is no need to track
so much state or cascade bio submission (as was done, via
writethrough_endio(), to issue origin then cache IO in series).
As such the obsolete writethrough list and workqueue is also removed.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Discontinue issuing writethrough write IO in series to the origin and
then cache.
Use bio_clone_fast() to create a new origin clone bio that will be
mapped to the origin device and then bio_chain() it to the bio that gets
remapped to the cache device. The origin clone bio does _not_ have a
copy of the per_bio_data -- as such check_if_tick_bio_needed() will not
be called.
The cache bio (parent bio) will not complete until the origin bio has
completed -- this fulfills bio_clone_fast()'s requirements as well as
the requirement to not complete the original IO until the write IO has
completed to both the origin and cache device.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When a DM cache in writeback mode moves data between the slow and fast
device it can often avoid a copy if the triggering bio either:
i) covers the whole block (no point copying if we're about to overwrite it)
ii) the migration is a promotion and the origin block is currently discarded
Prior to this fix there was a race with case (ii). The discard status
was checked with a shared lock held (rather than exclusive). This meant
another bio could run in parallel and write data to the origin, removing
the discard state. After the promotion the parallel write would have
been lost.
With this fix the discard status is re-checked once the exclusive lock
has been aquired. If the block is no longer discarded it falls back to
the slower full copy path.
Fixes: b29d4986d ("dm cache: significant rework to leverage dm-bio-prison-v2")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Patch fixes kmemleak on md_stop() path used likely only by dm-raid wrapper.
Code of md is using mddev_put() where both bitsets are released however this
freeing is not shared.
Also set NULL to bio_set and sync_set pointers just like mddev_put is
doing.
Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
For a RAID1 device using a file-based bitmap, if a bitmap write error
occurs but the later writes succeed, it's possible both BITMAP_STALE
and BITMAP_WRITE_ERROR bits will be written to the bitmap super block,
the BITMAP_STALE bit will be handled properly and be cleared, but the
BITMAP_WRITE_ERROR bit in sb->flags will make bitmap_create() to fail.
So clear it to protect against the write failure-and-then-recovery case.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
The ->recovery_offset shows how much of a non-InSync device is actually
in sync - how much has been recoveryed.
When performing a recovery, ->curr_resync and ->curr_resync_completed
follow the device address being recovered and so can be used to update
->recovery_offset.
When performing a reshape, ->curr_resync* might follow the device
addresses (raid5) or might follow array addresses (raid10), so cannot
in general be used to set ->recovery_offset. When reshaping backwards,
->curre_resync* measures from the *end* of the array-or-device, so is
particularly unhelpful.
So change the common code in md.c to only use ->curr_resync_complete
for the simple recovery case, and add code to raid5.c to update
->recovery_offset during a forwards reshape.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
dm-verity is starting async. crypto ops and waiting for them to complete.
Move it over to generic code doing the same.
This also avoids a future potential data coruption bug created
by the use of wait_for_completion_interruptible() without dealing
correctly with an interrupt aborting the wait prior to the
async op finishing, should this code ever move to a context
where signals are not masked.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
CC: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only MD_SB_CHANGE_PENDING should be used to wait for transition from
clean to dirty. Checking also MD_SB_CHANGE_CLEAN is unnecessary and can
race with e.g. md_do_sync(). This sporadically causes a hang when
changing consistency policy during resync:
INFO: task mdadm:6183 blocked for more than 30 seconds.
Not tainted 4.14.0-rc3+ #391
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mdadm D12752 6183 6022 0x00000000
Call Trace:
__schedule+0x93f/0x990
schedule+0x6b/0x90
md_allow_write+0x100/0x130 [md_mod]
? do_wait_intr_irq+0x90/0x90
resize_stripes+0x3a/0x5b0 [raid456]
? kernfs_fop_write+0xbe/0x180
raid5_change_consistency_policy+0xa6/0x200 [raid456]
consistency_policy_store+0x2e/0x70 [md_mod]
md_attr_store+0x90/0xc0 [md_mod]
sysfs_kf_write+0x42/0x50
kernfs_fop_write+0x119/0x180
__vfs_write+0x28/0x110
? rcu_sync_lockdep_assert+0x12/0x60
? __sb_start_write+0x15a/0x1c0
? vfs_write+0xa3/0x1a0
vfs_write+0xb4/0x1a0
SyS_write+0x49/0xa0
entry_SYSCALL_64_fastpath+0x18/0xad
Fixes: 2214c260c7 ("md: don't return -EAGAIN in md_allow_write for external metadata arrays")
Cc: <stable@vger.kernel.org>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
The pointer q is assigned but never read; it is redundant and can
be removed. Cleans up clang warning:
drivers/md/md-multipath.c:260:4: warning: Value stored to 'q' is
never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shaohua Li <shli@fb.com>
There are some lines could be removed due to recent
change for raid1 such as commit 3956df15d634 ("md:
move suspend_hi/lo handling into core md code").
Also, seems some comments are put to wrong place,
move them before wait_barrier.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Suspending the entire device for resync could take
too long. Resync in small chunks.
cluster's resync window is maintained in r10conf as
cluster_sync_low and cluster_sync_high, and processed
in raid10's sync_request(). If the current resync is
outside the cluster resync window:
1. Set the cluster_sync_low to curr_resync_completed.
2. Set cluster_sync_high to cluster_sync_low + stripe
size.
3. Send a message to all nodes so they may add it in
their suspension list.
Note:
We only support "near" raid10 so far, resync a far or
offset raid10 array could have trouble. So raid10_run
checks the layout of clustered raid10, it will refuse
to run if the layout is not correct.
With the "near" layout we process one stripe at a time
progressing monotonically through the address space.
So we can have a sliding window of whole-stripes which
moves through the array suspending IO on other nodes,
and both resync which uses array addresses and recovery
which uses device addresses can stay within this window.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
If there is a resync going on, all nodes must suspend
writes to the range. This is recorded in suspend_info
and suspend_list.
If there is an I/O within the ranges of any of the
suspend_info, area_resyncing will return 1.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Just like clustered raid1, it is impossible for cluster raid10
to choose the best device for read balance when the area of
array is resyncing. Because we cannot trust the data to be the
same on all devices at that time, so we choose just the first
one to use, so set do_balance to 0.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
If freeze_array is attempted in the middle of close_sync/
wait_all_barriers, deadlock can occur.
freeze_array will wait for nr_pending and nr_queued to line up.
wait_all_barriers increments nr_pending for each barrier bucket, one
at a time, but doesn't actually issue IO that could be counted in
nr_queued. So freeze_array is blocked until wait_all_barriers
completes and allow_all_barriers runs. At the same time, when
_wait_barrier sees array_frozen == 1, it stops and waits for
freeze_array to complete.
Prevent the deadlock by making close_sync call _wait_barrier and
_allow_barrier for one bucket at a time, instead of deferring the
_allow_barrier calls until after all _wait_barriers are complete.
Signed-off-by: Nate Dailey <nate.dailey@stratus.com>
Fix: fd76863e37fe(RAID1: a new I/O barrier implementation to remove resync window)
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org (v4.11)
Signed-off-by: Shaohua Li <shli@fb.com>
Hi - I submit this patch for the next merge window:
Some times ago, I made a patch f9c79bc05a that blocks signals around the
schedule() calls in MD. The MD subsystem needs to do an uninterruptible
sleep that is not accounted in load average - so we block signals and use
interruptible sleep.
The kernel has a special TASK_IDLE state for this purpose, so we can use
it instead of blocking signals. This patch doesn't fix any bug, it just
makes the code simpler.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
The '2' argument means "wake up anything that is waiting".
This is an inelegant part of the design and was added
to help support management of suspend_lo/suspend_hi setting.
Now that suspend_lo/hi is managed in mddev_suspend/resume,
that need is gone.
These is still a couple of places where we call 'quiesce'
with an argument of '2', but they can safely be changed to
call ->quiesce(.., 1); ->quiesce(.., 0) which
achieve the same result at the small cost of pausing IO
briefly.
This removes a small "optimization" from suspend_{hi,lo}_store,
but it isn't clear that optimization served a useful purpose.
The code now is a lot clearer.
Suggested-by: Shaohua Li <shli@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
There are various deadlocks that can occur
when a thread holds reconfig_mutex and calls
->quiesce(mddev, 1).
As some write request block waiting for
metadata to be updated (e.g. to record device
failure), and as the md thread updates the metadata
while the reconfig mutex is held, holding the mutex
can stop write requests completing, and this prevents
->quiesce(mddev, 1) from completing.
->quiesce() is now usually called from mddev_suspend(),
and it is always called with reconfig_mutex held. So
at this time it is safe for the thread to update metadata
without explicitly taking the lock.
So add 2 new flags, one which says the unlocked updates is
allowed, and one which ways it is happening. Then allow it
while the quiesce completes, and then wait for it to finish.
Reported-and-tested-by: Xiao Ni <xni@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
mddev_suspend() is a more general interface than
calling ->quiesce() and is so more extensible. A
future patch will make use of this.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
responding to ->suspend_lo and ->suspend_hi is similar
to responding to ->suspended. It is best to wait in
the common core code without incrementing ->active_io.
This allows mddev_suspend()/mddev_resume() to work while
requests are waiting for suspend_lo/hi to change.
This is will be important after a subsequent patch
which uses mddev_suspend() to synchronize updating for
suspend_lo/hi.
So move the code for testing suspend_lo/hi out of raid1.c
and raid5.c, and place it in md.c
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
bitmap_create() allocates memory with GFP_KERNEL and
so can wait for IO.
If called while the array is quiesced, it could wait indefinitely
for write out to the array - deadlock.
So call bitmap_create() before quiescing the array.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Most often mddev_suspend() is called with
reconfig_mutex held. Make this a requirement in
preparation a subsequent patch. Also require
reconfig_mutex to be held for mddev_resume(),
partly for symmetry and partly to guarantee
no races with incr/decr of mddev->suspend.
Taking the mutex in r5c_disable_writeback_async() is
a little tricky as this is called from a work queue
via log->disable_writeback_work, and flush_work()
is called on that while holding ->reconfig_mutex.
If the work item hasn't run before flush_work()
is called, the work function will not be able to
get the mutex.
So we use mddev_trylock() inside the wait_event() call, and have that
abort when conf->log is set to NULL, which happens before
flush_work() is called.
We wait in mddev->sb_wait and ensure this is woken
when any of the conditions change. This requires
waking mddev->sb_wait in mddev_unlock(). This is only
like to trigger extra wake_ups of threads that needn't
be woken when metadata is being written, and that
doesn't happen often enough that the cost would be
noticeable.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Having both a bitmap and a journal is pointless.
Attempting to do so can corrupt the bitmap if the journal
replay happens before the bitmap is initialized.
Rather than try to avoid this corruption, simply
refuse to allow arrays with both a bitmap and a journal.
So:
- if raid5_run sees both are present, fail.
- if adding a bitmap finds a journal is present, fail
- if adding a journal finds a bitmap is present, fail.
Cc: stable@vger.kernel.org (4.10+)
Signed-off-by: NeilBrown <neilb@suse.com>
Tested-by: Joshua Kinard <kumba@gentoo.org>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
mutex_destroy does nothing most of time, but it's better to call
it to make the code future proof and it also has some meaning
for like mutex debug.
As Coly pointed out in a previous review, bcache_exit() may not be
able to handle all the references properly if userspace registers
cache and backing devices right before bch_debug_init runs and
bch_debug_init failes later. So not exposing userspace interface
until everything is ready to avoid that issue.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, Cache missed IOs are identified by s->cache_miss, but actually,
there are many situations that missed IOs are not assigned a value for
s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO
(s->iop.bypass = 1), or the cache_bio allocate failed. In these situations,
it will go to out_put or out_submit, and s->cache_miss is null, which leads
bch_mark_cache_accounting() to treat this IO as a hit IO.
[ML: applied by 3-way merge]
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bucket_in_use is updated in gc thread which triggered by invalidating or
writing sectors_to_gc dirty data, It's a long interval. Therefore, when we
use it to compare with the threshold, it is often not timely, which leads
to inaccurate judgment and often results in bucket depletion.
We have send a patch before, by the means of updating bucket_in_use
periodically In gc thread, which Coly thought that would lead high
latency, In this patch, we add avail_nbuckets to record the count of
available buckets, and we calculate bucket_in_use when alloc or free
bucket in real time.
[edited by ML: eliminated some whitespace errors]
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable cached_dev.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When bcache does read I/Os, for example in writeback or writethrough mode,
if a read request on cache device is failed, bcache will try to recovery
the request by reading from cached device. If the data on cached device is
not synced with cache device, then requester will get a stale data.
For critical storage system like database, providing stale data from
recovery may result an application level data corruption, which is
unacceptible.
With this patch, for a failed read request in writeback or writethrough
mode, recovery a recoverable read request only happens when cache device
is clean. That is to say, all data on cached device is up to update.
For other cache modes in bcache, read request will never hit
cached_dev_read_error(), they don't need this patch.
Please note, because cache mode can be switched arbitrarily in run time, a
writethrough mode might be switched from a writeback mode. Therefore
checking dc->has_data in writethrough mode still makes sense.
Changelog:
V4: Fix parens error pointed by Michael Lyle.
v3: By response from Kent Oversteet, he thinks recovering stale data is a
bug to fix, and option to permit it is unnecessary. So this version
the sysfs file is removed.
v2: rename sysfs entry from allow_stale_data_on_failure to
allow_stale_data_on_failure, and fix the confusing commit log.
v1: initial patch posted.
[small change to patch comment spelling by mlyle]
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reported-by: Arne Wolf <awolf@lenovo.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Kai Krakow <hurikhan77@gmail.com>
Cc: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
It's possible to transform the bulk of kernel code using the Coccinelle
script below. However, this doesn't pick up some uses, including those
in dm-integrity.c. As a preparatory step, this patch converts the driver
to use {READ,WRITE}_ONCE() consistently.
At the same time, this patch adds the missing include of
<linux/compiler.h> necessary for the {READ,WRITE}_ONCE() definitions.
----
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-1-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable dm_cache_metadata.ref_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable table_device.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable dm_dev_internal.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A common idiom is to assign a value to a bit with:
if (value)
set_bit(nr, addr);
else
clear_bit(nr, addr);
Likewise common is the one-line expression variant:
value ? set_bit(nr, addr) : clear_bit(nr, addr);
Commit 9a8ac3ae68 ("dm mpath: cleanup QUEUE_IF_NO_PATH bit
manipulation by introducing assign_bit()") introduced assign_bit()
to the md subsystem for brevity.
Make it available to others, specifically gpiolib and the upcoming
driver for Maxim MAX3191x industrial serializer chips.
As requested by Peter Zijlstra, change the argument order to reflect
traditional "dst = src" in C, hence "assign_bit(nr, addr, value)".
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Neil Brown <neilb@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When reshaping a fully degraded raid5/raid6 to a larger
nubmer of devices, the new device(s) are not in-sync
and so that can make the newly grown stripe appear to be
"failed".
To avoid this, we set the R5_Expanded flag to say "Even though
this device is not fully in-sync, this block is safe so
don't treat the device as failed for this stripe".
This flag is set for data devices, not not for parity devices.
Consequently, if you have a RAID6 with two devices that are partly
recovered and a spare, and start a reshape to include the spare,
then when the reshape gets past the point where the recovery was
up to, it will think the stripes are failed and will get into
an infinite loop, failing to make progress.
So when contructing parity on an EXPAND_READY stripe,
set R5_Expanded.
Reported-by: Curt <lightspd@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Variables dev and bio_last_sector are assigned values that are never
read and hence these are redundant variables and can be removed.
Also remove the duplicated initialization of sectors, the latter
assignment is identical to the first and can be removed.
Cleans up 3 clang build warnings:
Value stored to 'dev' is never read
Value stored to 'bio_last_sector' is never read
Value stored to 'sectors' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Motivated by the desire to illiminate the imprecise nature of
DM-specific patches being unnecessarily sent to both the MD maintainer
and mailing-list. Which is born out of the fact that DM files also
reside in drivers/md/
Now all MD-specific files in drivers/md/ start with either "raid" or
"md-" and the MAINTAINERS file has been updated accordingly.
Shaohua: don't change module name
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
The raid10 driver can't be built with clang since it uses a variable
length array in a structure (VLAIS):
drivers/md/raid10.c:4583:17: error: fields must have a constant size:
'variable length array in structure' extension will never be supported
Allocate the r10bio struct with kmalloc instead of using the VLAIS
construct.
Shaohua: set the MD_RECOVERY_INTR bit
Neil Brown: use GFP_NOIO
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Shaohua Li <shli@fb.com>
The function cluster_check_sync_size is local to the source and does
not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol 'cluster_check_sync_size' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shaohua Li <shli@fb.com>
If starting an array that is undergoing rebuild, make ppl recovery honor
the recovery_offset of a member disk and don't read data that is not yet
in-sync.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
The check for degraded array is unnecessary and causes a resync to be
performed after ppl recovery and rebuild when restarting an array during
rebuilding after unclean shutdown.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
The check used here is to avoid conflict between write and
resync, however we used the wrong logic, it should be the
inverse of the checking inside "if".
Fixes: 589a1c4 ("Suspend writes in RAID1 if within range")
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
This reverts commit 8031c3ddc7. That patches doesn't work well if PAGE_SIZE >
4k. We will fix the original problem with a different approach.
Fix: 8031c3ddc70a(md/bitmap: copy correct data for bitmap super)
Reported-by: Joshua Kinard <kumba@gentoo.org>
Cc: stable@vger.kernel.org (4.10+)
Suggested-by: Neil Brown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Sorry this got through to linux-block, was detected by the kbuilds test
robot. NSEC_PER_SEC is a long constant; 2.5 * 10^9 doesn't fit in a
signed long constant.
Fixes: e41166c5c4 ("bcache: writeback rate shouldn't artifically clamp")
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The use of the union reduces the size of closure struct by taking advantage
of the current size of its members. The offset of func in work_struct
equals the size of the first three members, so that work.work_func will
just reference the forth member - fn.
This is smart but dangerous. It can be broken if work_struct or the other
structs get changed, and can be a bit difficult to debug.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The time spent searching for things to write back "counts" for the
actual rate achieved, so don't flush the accumulated rate with each
chunk.
This will maintain better fidelity to user-commanded rates, but it
may slightly increase the burstiness of writeback. The writeback
lock needs improvement to help mitigate this.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The previous code artificially limited writeback rate to 1000000
blocks/second (NSEC_PER_MSEC), which is a rate that can be met on fast
hardware. The rate limiting code works fine (though with decreased
precision) up to 3 orders of magnitude faster, so use NSEC_PER_SEC.
Additionally, ensure that uint32_t is used as a type for rate throughout
the rate management so that type checking/clamp_t can work properly.
bch_next_delay should be rewritten for increased precision and better
handling of high rates and long sleep periods, but this is adequate for
now.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reported-by: Coly Li <colyli@suse.de>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This works in conjunction with the new PI controller. Currently, in
real-world workloads, the rate controller attempts to write back 1
sector per second. In practice, these minimum-rate writebacks are
between 4k and 60k in test scenarios, since bcache aggregates and
attempts to do contiguous writes and because filesystems on top of
bcachefs typically write 4k or more.
Previously, bcache used to guarantee to write at least once per second.
This means that the actual writeback rate would exceed the configured
amount by a factor of 8-120 or more.
This patch adjusts to be willing to sleep up to 2.5 seconds, and to
target writing 4k/second. On the smallest writes, it will sleep 1
second like before, but many times it will sleep longer and load the
backing device less. This keeps the loading on the cache and backing
device related to writeback more consistent when writing back at low
rates.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bcache uses a control system to attempt to keep the amount of dirty data
in cache at a user-configured level, while not responding excessively to
transients and variations in write rate. Previously, the system was a
PD controller; but the output from it was integrated, turning the
Proportional term into an Integral term, and turning the Derivative term
into a crude Proportional term. Performance of the controller has been
uneven in production, and it has tended to respond slowly, oscillate,
and overshoot.
This patch set replaces the current control system with an explicit PI
controller and tuning that should be correct for most hardware. By
default, it attempts to write at a rate that would retire 1/40th of the
current excess blocks per second. An integral term in turn works to
remove steady state errors.
IMO, this yields benefits in simplicity (removing weighted average
filtering, etc) and system performance.
Another small change is a tunable parameter is introduced to allow the
user to specify a minimum rate at which dirty blocks are retired.
There is a slight difference from earlier versions of the patch in
integral handling to prevent excessive negative integral windup.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an IO operation fails, and we didn't successfully read data from the
cache, don't writeback invalid/partial data to the backing disk.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Parameter bio is no longer used, clean it.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Flag for bypass if the IO is for read-ahead or background, unless the
read-ahead request is for metadata (eg, from gfs2).
Bypass if:
bio->bi_opf & (REQ_RAHEAD|REQ_BACKGROUND) &&
!(bio->bi_opf & REQ_META))
Writeback if:
op_is_sync(bio->bi_opf) ||
bio->bi_opf & (REQ_META|REQ_PRIO)
Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
set_capacity() has been called in bcache_device_init(),
remove the redundant one.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current partition support of bcache is confusing and buggy. It tries to
trace non-continuous device minor numbers by an ida bit string, and
mistakenly mixed bcache device index with minor numbers. This design
generates several negative results,
- Index of bcache device name is not consecutive under /dev/. If there are
3 bcache devices, they name will be,
/dev/bcache0, /dev/bcache16, /dev/bcache32
Only bcache code indexes bcache device name is such an interesting way.
- First minor number of each bcache device is traced by ida bit string.
One bcache device will occupy 16 bits, this is not a good idea. Indeed
only one bit is enough.
- Because minor number and bcache device index are mixed, a device index
is allocated by ida_simple_get(), but an first minor number is sent into
ida_simple_remove() to release the device. It confused original author
too.
Root cause of the above errors is, bcache code should not handle device
minor numbers at all! A standard process to support multiple partitions in
Linux kernel is,
- Device driver provides major device number, and indexes multiple device
instances.
- Device driver does not allocat nor trace device minor number, only
provides a first minor number of a given device instance, and sets how
many minor numbers (paritions) the device instance may have.
All rested stuffs are handled by block layer code, most of the details can
be found from block/{genhd, partition-generic}.c files.
This patch re-writes multiple partitions support for bcache. It makes
whole things to be more clear, and uses ida bit string in a more efficeint
way.
- Ida bit string only traces bcache device index, not minor number. For a
bcache device with 128 partitions, only one bit in ida bit string is
enough.
- Device minor number and device index are separated in concept. Device
index is used for /dev node naming, and ida bit string trace. Minor
number is calculated from device index and only used to initialize
first_minor of a bcache device.
- It does not follow any standard for 16 partitions on a bcache device.
This patch sets 128 partitions on single bcache device at max, this is
the limitation from GPT (GUID Partition Table) and supported by fdisk.
Considering a typical device minor number is 20 bits width, each bcache
device may have 128 partitions (7 bits), there can be 8192 bcache devices
existing on system. For most common deployment for a single server in
now days, it should be enough.
[minor spelling fixes in commit message by Michael Lyle]
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Code comments in alloc.c:bch_alloc_sectors() mentions a function
name find_data_bucket(), the correct function name should be
pick_data_bucket() indeed. bch_alloc_sectors() is a quite important
function in bcache allocation code, fixing the typo may help
other people to have less confusion.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In bcache code, sysfs entries are created before all resources get
allocated, e.g. allocation thread of a cache set.
There is posibility for NULL pointer deference if a resource is accessed
but which is not initialized yet. Indeed Jorg Bornschein catches one on
cache set allocation thread and gets a kernel oops.
The reason for this bug is, when bch_bucket_alloc() is called during
cache set registration and attaching, ca->alloc_thread is not properly
allocated and initialized yet, call wake_up_process() on ca->alloc_thread
triggers NULL pointer deference failure. A simple and fast fix is, before
waking up ca->alloc_thread, checking whether it is allocated, and only
wake up ca->alloc_thread when it is not NULL.
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Jorg Bornschein <jb@capsec.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes below error with clang:
../drivers/md/bcache/sysfs.c:759:3: error: function definition is not allowed here
{ return *((uint16_t *) r) - *((uint16_t *) l); }
^
../drivers/md/bcache/sysfs.c:789:32: error: use of undeclared identifier 'cmp'
sort(p, n, sizeof(uint16_t), cmp, NULL);
^
2 errors generated.
v2:
rename function to __bch_cache_cmp
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 4ad23a9764 ("MD: use per-cpu counter for writes_pending"),
the wait_queue is only got invoked if THREAD_WAKEUP is not set previously.
With above change, I can see process_metadata_update could always hang on
the wait queue, because mddev->thread could stay on 'D' status and the
THREAD_WAKEUP flag is not cleared since there are lots of place to wake up
mddev->thread. Then deadlock happened as follows:
linux175:~ # ps aux|grep md|grep D
root 20117 0.0 0.0 0 0 ? D 03:45 0:00 [md0_raid1]
root 20125 0.0 0.0 0 0 ? D 03:45 0:00 [md0_cluster_rec]
linux175:~ # cat /proc/20117/stack
[<ffffffffa0635604>] dlm_lock_sync+0x94/0xd0 [md_cluster]
[<ffffffffa0635674>] lock_token+0x34/0xd0 [md_cluster]
[<ffffffffa0635804>] metadata_update_start+0x64/0x110 [md_cluster]
[<ffffffffa04d985b>] md_update_sb.part.58+0x9b/0x860 [md_mod]
[<ffffffffa04da035>] md_update_sb+0x15/0x30 [md_mod]
[<ffffffffa04dc066>] md_check_recovery+0x266/0x490 [md_mod]
[<ffffffffa06450e2>] raid1d+0x42/0x810 [raid1]
[<ffffffffa04d2252>] md_thread+0x122/0x150 [md_mod]
[<ffffffff81091741>] kthread+0x101/0x140
linux175:~ # cat /proc/20125/stack
[<ffffffffa0636679>] recv_daemon+0x3f9/0x5c0 [md_cluster]
[<ffffffffa04d2252>] md_thread+0x122/0x150 [md_mod]
[<ffffffff81091741>] kthread+0x101/0x140
So let's revert the part of code in the commit to resovle the problem since
we can't get lots of benefits of previous change.
Fixes: 4ad23a9764 ("MD: use per-cpu counter for writes_pending")
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Pull block fixes from Jens Axboe:
"A collection of fixes for this series. This contains:
- NVMe pull request from Christoph, one uuid attribute fix, and one
fix for the controller memory buffer address for remapped BARs.
- use-after-free fix for bsg, from Benjamin Block.
- bcache race/use-after-free fix for a list traversal, fixing a
regression in this merge window. From Coly Li.
- null_blk change configfs dependency change from a 'depends' to a
'select'. This is a change from this merge window as well. From me.
- nbd signal fix from Josef, fixing a regression introduced with the
status code changes.
- nbd MAINTAINERS mailing list entry update.
- blk-throttle stall fix from Joseph Qi.
- blk-mq-debugfs fix from Omar, fixing an issue where we don't
register the IO scheduler debugfs directory, if the driver is
loaded with it. Only shows up if you switch through the sysfs
interface"
* 'for-linus' of git://git.kernel.dk/linux-block:
bsg-lib: fix use-after-free under memory-pressure
nvme-pci: Use PCI bus address for data/queues in CMB
blk-mq-debugfs: fix device sched directory for default scheduler
null_blk: change configfs dependency to select
blk-throttle: fix possible io stall when upgrade to max
MAINTAINERS: update list for NBD
nbd: fix -ERESTARTSYS handling
nvme: fix visibility of "uuid" ns attribute
bcache: use llist_for_each_entry_safe() in __closure_wake_up()
end of the 'DM_LIST_DEVICES' ioctl.
- A couple stable fixes for the DM crypt target.
- A DM raid health status reporting fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZ1pR1AAoJEMUj8QotnQNa48kIAJ+HTqeNjVhspxqKyJHPl78W
3N/B11dWJ/CQ4xN7tbpC2gmsbnBBHE8RFTJzk3xQo7yoKsD0muqH35n0XA7X2A29
i7DoYro/7F6ZuPlgzhzcCjA7eTugR4vcp5dTFYoIQG0DaOKAkN/+gJTVjNDjpRR5
oGljZhKTeS4UNJTv/+ZjSMuAPycZq8LKRMOn/EgqT9MD4cIQ9VHN2qGc8jQt0Xrb
m58URvAoFesGnSjZcypk+JG2SbUfJ4WB3Db7+A+X7lu2219FIroFhNHMk9obYhXG
mkrhEnAsVsq/paPhCY4gdXWmSe7RNiAeSJeWhUSrNfjUACf1GF+l4CgBeBWIX+0=
=V40h
-----END PGP SIGNATURE-----
Merge tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a stable fix for the alignment of the event number reported at the
end of the 'DM_LIST_DEVICES' ioctl.
- a couple stable fixes for the DM crypt target.
- a DM raid health status reporting fix.
* tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm raid: fix incorrect status output at the end of a "recover" process
dm crypt: reject sector_size feature if device length is not aligned to it
dm crypt: fix memory leak in crypt_ctr_cipher_old()
dm ioctl: fix alignment of event number in the device list
We already have a queue_is_rq_based helper to check if a request_queue
is request based, so we can remove the flag for it.
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are three important fields that indicate the overall health and
status of an array: dev_health, sync_ratio, and sync_action. They tell
us the condition of the devices in the array, and the degree to which
the array is synchronized.
This commit fixes a condition that is reported incorrectly. When a member
of the array is being rebuilt or a new device is added, the "recover"
process is used to synchronize it with the rest of the array. When the
process is complete, but the sync thread hasn't yet been reaped, it is
possible for the state of MD to be:
mddev->recovery = [ MD_RECOVERY_RUNNING MD_RECOVERY_RECOVER MD_RECOVERY_DONE ]
curr_resync_completed = <max dev size> (but not MaxSector)
and all rdevs to be In_sync.
This causes the 'array_in_sync' output parameter that is passed to
rs_get_progress() to be computed incorrectly and reported as 'false' --
or not in-sync. This in turn causes the dev_health status characters to
be reported as all 'a', rather than the proper 'A'.
This can cause erroneous output for several seconds at a time when tools
will want to be checking the condition due to events that are raised at
the end of a sync process. Fix this by properly calculating the
'array_in_sync' return parameter in rs_get_progress().
Also, remove an unnecessary intermediate 'recovery_cp' variable in
rs_get_progress().
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
A recent patch aimed to cause md_write_start() to fail (rather than
block) when the mddev was suspending, so as to avoid deadlocks.
Unfortunately the test in wait_event() was wrong, and it didn't change
behaviour at all.
We wait_event() must wait until the metadata is written OR the array is
suspending.
Fixes: cc27b0c78c ("md: fix deadlock between mddev_suspend() and md_write_start()")
Cc: stable@vger.kernel.org
Reported-by: Xiao Ni <xni@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
If a crypt mapping uses optional sector_size feature, additional
restrictions to mapped device segment size must be applied in
constructor, otherwise the device activation will fail later.
Fixes: 8f0009a225 ("dm crypt: optionally support larger encryption sector size")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Instead of adding weird retry logic in that function, utilize
__GFP_NOFAIL to ensure that the vm takes care of handling any
potential retries appropriately. This means we don't have to
call free_more_memory() from here.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix memory leak of cipher_api.
Fixes: 33d2f09fcb (dm crypt: introduce new format of cipher with "capi:" prefix)
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
static checker reports a potential integer overflow. Cap the worker count to
avoid the overflow.
Reported:-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shaohua Li <shli@fb.com>
raid_map calls pers->make_request, which missed the suspend check. Fix it with
the new md_handle_request API.
Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: Heinz Mauelshagen <heinzm@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
md_submit_flush_data calls pers->make_request, which missed the suspend check.
Fix it with the new md_handle_request API.
Reported-by: Nate Dailey <nate.dailey@stratus.com>
Tested-by: Nate Dailey <nate.dailey@stratus.com>
Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
With commit cc27b0c78c, pers->make_request could bail out without handling
the bio. If that happens, we should retry. The commit fixes md_make_request
but not other call sites. Separate the request handling part, so other call
sites can use it.
Reported-by: Nate Dailey <nate.dailey@stratus.com>
Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Commit 09b3efec ("bcache: Don't reinvent the wheel but use existing llist
API") replaces the following while loop by llist_for_each_entry(),
-
- while (reverse) {
- cl = container_of(reverse, struct closure, list);
- reverse = llist_next(reverse);
-
+ llist_for_each_entry(cl, reverse, list) {
closure_set_waiting(cl, 0);
closure_sub(cl, CLOSURE_WAITING + 1);
}
This modification introduces a potential race by iterating a corrupted
list. Here is how it happens.
In the above modification, closure_sub() may wake up a process which is
waiting on reverse list. If this process decides to wait again by calling
closure_wait(), its cl->list will be added to another wait list. Then
when llist_for_each_entry() continues to iterate next node, it will travel
on another new wait list which is added in closure_wait(), not the
original reverse list in __closure_wake_up(). It is more probably to
happen on UP machine because the waked up process may preempt the process
which wakes up it.
Use llist_for_each_entry_safe() will fix the issue, the safe version fetch
next node before waking up a process. Then the copy of next node will make
sure list iteration stays on original reverse list.
Fixes: 09b3efec81 ("bcache: Don't reinvent the wheel but use existing llist API")
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The size of struct dm_name_list is different on 32-bit and 64-bit
kernels (so "(nl + 1)" differs between 32-bit and 64-bit kernels).
This mismatch caused some harmless difference in padding when using 32-bit
or 64-bit kernel. Commit 23d70c5e52 ("dm ioctl: report event number in
DM_LIST_DEVICES") added reporting event number in the output of
DM_LIST_DEVICES_CMD. This difference in padding makes it impossible for
userspace to determine the location of the event number (the location
would be different when running on 32-bit and 64-bit kernels).
Fix the padding by using offsetof(struct dm_name_list, name) instead of
sizeof(struct dm_name_list) to determine the location of entries.
Also, the ioctl version number is incremented to 37 so that userspace
can use the version number to determine that the event number is present
and correctly located.
In addition, a global event is now raised when a DM device is created,
removed, renamed or when table is swapped, so that the user can monitor
for device changes.
Reported-by: Eugene Syromiatnikov <esyr@redhat.com>
Fixes: 23d70c5e52 ("dm ioctl: report event number in DM_LIST_DEVICES")
Cc: stable@vger.kernel.org # 4.13
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pull MD fixes from Shaohua Li:
"Two small patches to fix long-lived raid5 stripe batch bugs, one from
Dennis and the other from me"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list
md/raid5: fix a race condition in stripe batch
- Constify a few variables in DM core and DM integrity
- Add bufio optimization and checksum failure accounting to DM integrity
- Fix DM integrity to avoid checking integrity of failed reads
- Fix DM integrity to use init_completion
- A couple DM log-writes target fixes
- Simplify DAX flushing by eliminating the unnecessary flush abstraction
that was stood up for DM's use.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZuo8UAAoJEMUj8QotnQNa5BEIANO4mHh1nrzEbH72a4RCLgxV
H1Pk1zZx/W1bhOOmcRRhxCSM85dPgsCegc5EmpwLZEMavQrP9UZblHcYOUsyIx7W
S/lWa+soOq/5N2OveROc4WdoWVs50UFmc1+BcClc4YrEe+15XC3R0VMkjX2b/hUL
o2eYhPjpMlgaorMtRRU6MAooo2fBRQ9m05aPeVgd35fxibrE7PZm+EYW09wa0STi
9ufuDXJf8+TtFP/38BD41LbUEskuHUZTSDeAJ+3DBaTtfEZcZYxsst4P9JangsHx
jqqqI9aYzFD2a27fl9WLhCvm40YFiKp5nwzED0RZjzWxVa/jTShX7a49BdzTTfw=
=rkSB
-----END PGP SIGNATURE-----
Merge tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Some request-based DM core and DM multipath fixes and cleanups
- Constify a few variables in DM core and DM integrity
- Add bufio optimization and checksum failure accounting to DM
integrity
- Fix DM integrity to avoid checking integrity of failed reads
- Fix DM integrity to use init_completion
- A couple DM log-writes target fixes
- Simplify DAX flushing by eliminating the unnecessary flush
abstraction that was stood up for DM's use.
* tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dax: remove the pmem_dax_ops->flush abstraction
dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK
dm integrity: make blk_integrity_profile structure const
dm integrity: do not check integrity for failed read operations
dm log writes: fix >512b sectorsize support
dm log writes: don't use all the cpu while waiting to log blocks
dm ioctl: constify ioctl lookup table
dm: constify argument arrays
dm integrity: count and display checksum failures
dm integrity: optimize writing dm-bufio buffers that are partially changed
dm rq: do not update rq partially in each ending bio
dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior
dm mpath: complain about unsupported __multipath_map_bio() return values
dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through
Commit abebfbe2f7 ("dm: add ->flush() dax operation support") is
buggy. A DM device may be composed of multiple underlying devices and
all of them need to be flushed. That commit just routes the flush
request to the first device and ignores the other devices.
It could be fixed by adding more complex logic to the device mapper. But
there is only one implementation of the method pmem_dax_ops->flush - that
is pmem_dax_flush() - and it calls arch_wb_cache_pmem(). Consequently, we
don't need the pmem_dax_ops->flush abstraction at all, we can call
arch_wb_cache_pmem() directly from dax_flush() because dax_dev->ops->flush
can't ever reach anything different from arch_wb_cache_pmem().
It should be also pointed out that for some uses of persistent memory it
is needed to flush only a very small amount of data (such as 1 cacheline),
and it would be overkill if we go through that device mapper machinery for
a single flushed cache line.
Fix this by removing the pmem_dax_ops->flush abstraction and call
arch_wb_cache_pmem() directly from dax_flush(). Also, remove the device
mapper code that forwards the flushes.
Fixes: abebfbe2f7 ("dm: add ->flush() dax operation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The new lockdep support for completions causeed the stack usage
in dm-integrity to explode, in case of write_journal from 504 bytes
to 1120 (using arm gcc-7.1.1):
drivers/md/dm-integrity.c: In function 'write_journal':
drivers/md/dm-integrity.c:827:1: error: the frame size of 1120 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
The problem is that not only the size of 'struct completion' grows
significantly, but we end up having multiple copies of it on the stack
when we assign it from a local variable after the initial declaration.
COMPLETION_INITIALIZER_ONSTACK() is the right thing to use when we
want to declare and initialize a completion on the stack. However,
this driver doesn't do that and instead initializes the completion
just before it is used.
In this case, init_completion() does the same thing more efficiently,
and drops the stack usage for the function above down to 496 bytes.
While the other functions in this file are not bad enough to cause
a warning, they benefit equally from the change, so I do the change
across the entire file. In the one place where we reuse a completion,
I picked the cheaper reinit_completion() over init_completion().
Fixes: cd8084f91c ("locking/lockdep: Apply crossrelease to completions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Make this structure const as it is only stored in the profile field of a
blk_integrity structure. This field is of type const, so make structure
as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Even though read operations fail, dm_integrity_map_continue() calls
integrity_metadata() to check integrity. In this case, just complete
these.
This also makes it so read I/O errors do not generate integrity warnings
in the kernel log.
Cc: stable@vger.kernel.org
Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Acked-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
512b sectors vs device's physical sectorsize was not maintained
consistently and as such the support for >512b sector devices has bugs.
The log metadata expects native sectorsize but 512b sectors were being
stored. Also, device's sectorsize was assumed when assigning the
bi_sector for blocks that were being logged.
Fix this up by adding two helpers to convert between bio and dev
sectors, and use these in the appropriate places to fix the problem and
make it clear which units go where. Doing so allows dm-log-writes use
with 4k devices.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The check to see if the logging kthread needs to go to sleep is wrong,
it checks lc->pending_blocks, which will be non-0 if there are any
blocks that are pending, whether they are ready to be logged or not.
What we really want is to go to sleep until it's time to log blocks, so
change this check so we do actually go to sleep in between flushes.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pull followup block layer updates from Jens Axboe:
"I ended up splitting the main pull request for this series into two,
mainly because of clashes between NVMe fixes that went into 4.13 after
the for-4.14 branches were split off. This pull request is mostly
NVMe, but not exclusively. In detail, it contains:
- Two pull request for NVMe changes from Christoph. Nothing new on
the feature front, basically just fixes all over the map for the
core bits, transport, rdma, etc.
- Series from Bart, cleaning up various bits in the BFQ scheduler.
- Series of bcache fixes, which has been lingering for a release or
two. Coly sent this in, but patches from various people in this
area.
- Set of patches for BFQ from Paolo himself, updating both
documentation and fixing some corner cases in performance.
- Series from Omar, attempting to now get the 4k loop support
correct. Our confidence level is higher this time.
- Series from Shaohua for loop as well, improving O_DIRECT
performance and fixing a use-after-free"
* 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-block: (74 commits)
bcache: initialize dirty stripes in flash_dev_run()
loop: set physical block size to logical block size
bcache: fix bch_hprint crash and improve output
bcache: Update continue_at() documentation
bcache: silence static checker warning
bcache: fix for gc and write-back race
bcache: increase the number of open buckets
bcache: Correct return value for sysfs attach errors
bcache: correct cache_dirty_target in __update_writeback_rate()
bcache: gc does not work when triggering by manual command
bcache: Don't reinvent the wheel but use existing llist API
bcache: do not subtract sectors_to_gc for bypassed IO
bcache: fix sequential large write IO bypass
bcache: Fix leak of bdev reference
block/loop: remove unused field
block/loop: fix use after free
bfq: Use icq_to_bic() consistently
bfq: Suppress compiler warnings about comparisons
bfq: Check kstrtoul() return value
bfq: Declare local functions static
...
Pull MD updates from Shaohua Li:
"This update mainly fixes bugs:
- Make raid5 ppl support several ppl from Pawel
- Several raid5-cache bug fixes from Song
- Bitmap fixes from Neil and Me
- One raid1/10 regression fix since 4.12 from Me
- Other small fixes and cleanup"
* tag 'md/4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/bitmap: disable bitmap_resize for file-backed bitmaps.
raid5-ppl: Recovery support for multiple partial parity logs
md: Runtime support for multiple ppls
md/raid0: attach correct cgroup info in bio
lib/raid6: align AVX512 constants to 512 bits, not bytes
raid5: remove raid5_build_block
md/r5cache: call mddev_lock/unlock() in r5c_journal_mode_show
md: replace seq_release_private with seq_release
md: notify about new spare disk in the container
md/raid1/10: reset bio allocated from mempool
md/raid5: release/flush io in raid5_do_work()
md/bitmap: copy correct data for bitmap super
bcache uses a Proportion-Differentiation Controller algorithm to control
writeback rate to cached devices. In the PD controller algorithm, dirty
stripes of thin flash device should not be counted in, because flash only
volumes never write back dirty data.
Currently dirty stripe counter for thin flash device is not initialized
when the thin flash device starts. Which means the following calculation
in PD controller will reference an undefined dirty stripes number, and
all cached devices attached to the same cache set where the thin flash
device lies on may have an inaccurate writeback rate.
This patch calles bch_sectors_dirty_init() in flash_dev_run(), to
correctly initialize dirty stripe counter when the thin flash device
starts to run. This patch also does following parameter data type change,
-void bch_sectors_dirty_init(struct cached_dev *dc);
+void bch_sectors_dirty_init(struct bcache_device *);
to call this function conveniently in flash_dev_run().
(Commit log is composed by Coly Li)
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
Most importantly, solve a crash where %llu was used to format signed
numbers. This would cause a buffer overflow when reading sysfs
writeback_rate_debug, as only 20 bytes were allocated for this and
%llu writes 20 characters plus a null.
Always use the units mechanism rather than having different output
paths for simplicity.
Also, correct problems with display output where 1.10 was a larger
number than 1.09, by multiplying by 10 and then dividing by 1024 instead
of dividing by 100. (Remainders of >= 1000 would print as .10).
Minor changes: Always display the decimal point instead of trying to
omit it based on number of digits shown. Decide what units to use
based on 1000 as a threshold, not 1024 (in other words, always print
at most 3 digits before the decimal point).
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reported-by: Dmitry Yu Okunev <dyokunev@ut.mephi.ru>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
continue_at() doesn't have a return statement anymore.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In olden times, closure_return() used to have a hidden return built in.
We removed the hidden return but forgot to add a new return here. If
"c" were NULL we would oops on the next line, but fortunately "c" is
never NULL. Let's just remove the if statement.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In currently, we only alloc 6 open buckets for each cache set,
but in usually, we always attach about 10 or so backend devices for
each cache set, and the each bcache device are always accessed by
about 10 or so threads in top application layer. So 6 open buckets
are too few, It has led to that each of the same thread write data
to different buckets, which would cause low efficiency write-back,
and also cause buckets inefficient, and would be Very easy to run
out of.
I add debug message in bch_open_buckets_alloc() to print alloc bucket
info, and test with ten bcache devices with a cache set, and each
bcache device is accessed by ten threads.
From the debug message, we can see that, after the modification, One
bucket is more likely to assign to the same thread, and the data from
the same thread are more likely to write the same bucket. Usually the
same thread always write/read the same backend device, so it is good
for write-back and also promote the usage efficiency of buckets.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If you encounter any errors in bch_cached_dev_attach it will return
a negative error code. The variable 'v' which stores the result is
unsigned, thus user space sees a very large value returned for bytes
written which can cause incorrect user space behavior. Utilize 1
signed variable to use throughout the function to preserve error return
capability.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Acked-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__update_write_rate() uses a Proportion-Differentiation Controller
algorithm to control writeback rate. A dirty target number is used in
this PD controller to control writeback rate. A larger target number
will make the writeback rate smaller, on the versus, a smaller target
number will make the writeback rate larger.
bcache uses the following steps to calculate the target number,
1) cache_sectors = all-buckets-of-cache-set * buckets-size
2) cache_dirty_target = cache_sectors * cached-device-writeback_percent
3) target = cache_dirty_target *
(sectors-of-cached-device/sectors-of-all-cached-devices-of-this-cache-set)
The calculation at step 1) for cache_sectors is incorrect, which does
not consider dirty blocks occupied by flash only volume.
A flash only volume can be took as a bcache device without cached
device. All data sectors allocated for it are persistent on cache device
and marked dirty, they are not touched by bcache writeback and garbage
collection code. So data blocks of flash only volume should be ignore
when calculating cache_sectors of cache set.
Current code does not subtract dirty sectors of flash only volume, which
results a larger target number from the above 3 steps. And in sequence
the cache device's writeback rate is smaller then a correct value,
writeback speed is slower on all cached devices.
This patch fixes the incorrect slower writeback rate by subtracting
dirty sectors of flash only volumes in __update_writeback_rate().
(Commit log composed by Coly Li to pass checkpatch.pl checking)
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I try to execute the following command to trigger gc thread:
[root@localhost internal]# echo 1 > trigger_gc
But it does not work, I debug the code in gc_should_run(), It works only
if in invalidating or sectors_to_gc < 0. So set sectors_to_gc to -1 to
meet the condition when we trigger gc by manual command.
(Code comments aded by Coly Li)
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Although llist provides proper APIs, they are not used. Make them used.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since bypassed IOs use no bucket, so do not subtract sectors_to_gc to
trigger gc thread.
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sequential write IOs were tested with bs=1M by FIO in writeback cache
mode, these IOs were expected to be bypassed, but actually they did not.
We debug the code, and find in check_should_bypass():
if (!congested &&
mode == CACHE_MODE_WRITEBACK &&
op_is_write(bio_op(bio)) &&
(bio-＞bi_opf & REQ_SYNC))
goto rescale
that means, If in writeback mode, a write IO with REQ_SYNC flag will not
be bypassed though it is a sequential large IO, It's not a correct thing
to do actually, so this patch remove these codes.
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If blkdev_get_by_path() in register_bcache() fails, we try to lookup the
block device using lookup_bdev() to detect which situation we are in to
properly report error. However we never drop the reference returned to
us from lookup_bdev(). Fix that.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In release_stripe_plug(), if a stripe_head has its STRIPE_ON_UNPLUG_LIST
set, it indicates that this stripe_head is already in the raid5_plug_cb
list and release_stripe() would be called instead to drop a reference
count. Otherwise, the STRIPE_ON_UNPLUG_LIST bit would be set for this
stripe_head and it will get queued into the raid5_plug_cb list.
Since break_stripe_batch_list() did not preserve STRIPE_ON_UNPLUG_LIST,
A stripe could be re-added to plug list while it is still on that list
in the following situation. If stripe_head A is added to another
stripe_head B's batch list, in this case A will have its
batch_head != NULL and be added into the plug list. After that,
stripe_head B gets handled and called break_stripe_batch_list() to
reset all the batched stripe_head(including A which is still on
the plug list)'s state and reset their batch_head to NULL.
Before the plug list gets processed, if there is another write request
comes in and get stripe_head A, A will have its batch_head == NULL
(cleared by calling break_stripe_batch_list() on B) and be added to
plug list once again.
Signed-off-by: Dennis Yang <dennisyang@qnap.com>
Cc: stable@vger.kernel.org (v4.1+)
Signed-off-by: Shaohua Li <shli@fb.com>
We have a race condition in below scenario, say have 3 continuous stripes, sh1,
sh2 and sh3, sh1 is the stripe_head of sh2 and sh3:
CPU1 CPU2 CPU3
handle_stripe(sh3)
stripe_add_to_batch_list(sh3)
-> lock(sh2, sh3)
-> lock batch_lock(sh1)
-> add sh3 to batch_list of sh1
-> unlock batch_lock(sh1)
clear_batch_ready(sh1)
-> lock(sh1) and batch_lock(sh1)
-> clear STRIPE_BATCH_READY for all stripes in batch_list
-> unlock(sh1) and batch_lock(sh1)
->clear_batch_ready(sh3)
-->test_and_clear_bit(STRIPE_BATCH_READY, sh3)
--->return 0 as sh->batch == NULL
-> sh3->batch_head = sh1
-> unlock (sh2, sh3)
In CPU1, handle_stripe will continue handle sh3 even it's in batch stripe list
of sh1. By moving sh3->batch_head assignment in to batch_lock, we make it
impossible to clear STRIPE_BATCH_READY before batch_head is set.
Thanks Stephane for helping debug this tricky issue.
Reported-and-tested-by: Stephane Thiell <sthiell@stanford.edu>
Cc: stable@vger.kernel.org (v4.1+)
Signed-off-by: Shaohua Li <shli@fb.com>
bitmap_resize() does not work for file-backed bitmaps.
The buffer_heads are allocated and initialized when
the bitmap is read from the file, but resize doesn't
read from the file, it loads from the internal bitmap.
When it comes time to write the new bitmap, the bh is
non-existent and we crash.
The common case when growing an array involves making the array larger,
and that normally means making the bitmap larger. Doing
that inside the kernel is possible, but would need more code.
It is probably easier to require people who use file-backed
bitmaps to remove them and re-add after a reshape.
So this patch disables the resizing of arrays which have
file-backed bitmaps. This is better than crashing.
Reported-by: Zhilong Liu <zlliu@suse.com>
Fixes: d60b479d17 ("md/bitmap: add bitmap_resize function to allow bitmap resizing.")
Cc: stable@vger.kernel.org (v3.5+).
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Constify the lookup table for device-mapper ioctls so that it is placed
in .rodata.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The arrays of 'struct dm_arg' are never modified by the device-mapper
core, so constify them so that they are placed in .rodata.
(Exception: the args array in dm-raid cannot be constified because it is
allocated on the stack and modified.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This changes DM integrity to count the number of checksum failures and
report the counter in response to STATUSTYPE_INFO request (via 'dmsetup
status').
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Rather than write the entire dm-bufio buffer when only a subset is
changed, improve dm-bufio (and dm-integrity) by only writing the subset
of the buffer that changed.
Update dm-integrity to make use of dm-bufio's new
dm_bufio_mark_partial_buffer_dirty() interface.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Search PPL buffer in order to find out the latest PPL header (the one
with largest generation number) and use it for recovery. The PPL entry
format and recovery algorithm are the same as for single PPL approach.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Increase PPL area to 1MB and use it as circular buffer to store PPL. The
entry with highest generation number is the latest one. If PPL to be
written is larger then space left in a buffer, rewind the buffer to the
start (don't wrap it).
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
We don't need to update the original dm request partially when ending
each cloned bio: just update original dm request once when the whole
cloned request is finished. This still allows full support for partial
completion because a new 'completed' counter accounts for incremental
progress as the clone bios complete.
Partial request update can be a bit expensive, so we should try to avoid
it, especially because it is run in softirq context.
Avoiding all the partial request updates fixes both hard lockup and
soft lockups that were easily reproduced while running Laurence's
test[1] on IB/SRP.
BTW, after d4acf3650c ("block: Make blk_mq_delay_kick_requeue_list()
rerun the queue at a quiet time"), we need to make the test more
aggressive for reproducing the lockup:
1) run hammer_write.sh 32 or 64 concurrently.
2) write 8M each time
[1] https://marc.info/?l=linux-block&m=150220185510245&w=2
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM_MAPIO_DELAY_REQUEUE causes dm-mq to requeue after a delay but
causes dm-sq to requeue immediately. Make the behavior of dm-sq
consistent with that of dm-mq.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
WARN_ONCE() if __multipath_map_bio() returns an unsupported return value.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When using the block layer in single queue mode, get_request()
returns ERR_PTR(-EAGAIN) if the queue is dying and the REQ_NOWAIT
flag has been passed to get_request(). Avoid that the kernel
reports soft lockup complaints in this case due to continuous
requeuing activity.
Fixes: 7083abbbf ("dm mpath: avoid that path removal can trigger an infinite loop")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Using the same rate limiting state for different kinds of messages
is wrong because this can cause a high frequency message to suppress
a report of a low frequency message. Hence use a unique rate limiting
state per message type.
Fixes: 71a16736a1 ("dm: use local printk ratelimit")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Retry requests instead of failing them if an out-of-memory error occurs
or the block driver below dm-mpath is busy. This restores the v4.12
behavior of noretry_error(), namely that -ENOMEM results in a retry.
Fixes: 2a842acab1 ("block: introduce new block status code type")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Now raid5_build_block is just called to set the
sector of r5dev, raid5_compute_blocknr can be
used directly for the purpose.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In r5c_journal_mode_show(), it is necessary to call mddev_lock()
before accessing conf and conf->log. Otherwise, the conf->log
may change (and become NULL).
Signed-off-by: Song Liu <songliubraving@fb.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Since commit f15146380d ("fs: seq_file - add event counter to simplify
poll() support"), md.c code has been no longer used the private field of
the struct seq_file, but seq_release_private() has been continued to be
used to release the allocated seq_file. This seems to have been
forgotten. So convert it to use seq_release() instead of
seq_release_private().
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In case of external metadata arrays spare disks are added to containers
first. mdadm keeps monitoring /proc/mdstat output and when spare disk is
available, it moves it from the container to the array. The problem is
there is no notification of new spare disk in the container and mdadm
waits a long time (until timeout) before it takes the action.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Data allocated from mempool doesn't always get initialized, this happens when
the data is reused instead of fresh allocation. In the raid1/10 case, we must
reinitialize the bios.
Reported-by: Jonathan G. Underwood <jonathan.underwood@gmail.com>
Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages)
Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages)
Cc: stable@vger.kernel.org (4.12+)
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In raid5, there are scenarios where some ios are deferred to a later
time, and some IO need a flush to complete. To make sure we make
progress with these IOs, we need to call the following functions:
flush_deferred_bios(conf);
r5l_flush_stripe_to_raid(conf->log);
Both of these functions are called in raid5d(), but missing in
raid5_do_work(). As a result, these functions are not called
when multi-threading (group_thread_cnt > 0) is enabled. This patch
adds calls to these function to raid5_do_work().
Note for stable branches:
r5l_flush_stripe_to_raid(conf->log) is need for 4.4+
flush_deferred_bios(conf) is only needed for 4.11+
Cc: stable@vger.kernel.org (4.4+)
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
raid5 cache could write bitmap superblock before bitmap superblock is
initialized. The bitmap superblock is less than 512B. The current code will
only copy the superblock to a new page and write the whole 512B, which will
zero the the data after the superblock. Unfortunately the data could include
bitmap, which we should preserve. The patch will make superblock read do 4k
chunk and we always copy the 4k data to new page, so the superblock write will
old data to disk and we don't change the bitmap.
Reported-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org (4.10+)
Signed-off-by: Shaohua Li <shli@fb.com>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer always remaps partitions before calling into the
->make_request methods of drivers. Thus the call to get_start_sect in
in_chunk_boundary will always return 0 and can be removed.
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->safemode should be triggered by mdadm for external metadaa array, otherwise
array's state confuses mdadm.
Fixes: 33182d15c6bf(md: always clear ->safemode when md_check_recovery gets the mddev lock.)
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
No functional change in this patch, just in preparation for
basing the inflight mechanism on the queue in question.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This flag is never set right after calling bio_integrity_alloc,
so don't clear it and confuse the reader.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In r5l_log_endio(), once log->io_list_lock is released, the io unit
may be accessed (or even freed) by other threads. Current code
doesn't handle the io_unit properly, which leads to potential race
conditions.
This patch solves this race condition by:
1. Add a pending_stripe count flush_payload. Multiple flush_payloads
are counted as only one pending_stripe. Flag has_flush_payload is
added to show whether the io unit has flush_payload;
2. In r5l_log_endio(), check flags has_null_flush and
has_flush_payload with log->io_list_lock held. After the lock
is released, this IO unit is only accessed when we know the
pending_stripe counter cannot be zeroed by other threads.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In r5c_journal_mode_set(), it is necessary to call mddev_lock()
before accessing conf and conf->log. Otherwise, the conf->log
may change (and become NULL).
Shaohua: fix unlock in failure cases
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
md_write_start() needs to clear the in_sync flag is it is set, or if
there might be a race with set_in_sync() such that the later will
set it very soon. In the later case it is sufficient to take the
spinlock to synchronize with set_in_sync(), and then set the flag
if needed.
The current test is incorrect.
It should be:
if "flag is set" or "race is possible"
"flag is set" is trivially "mddev->in_sync".
"race is possible" should be tested by "mddev->sync_checkers".
If sync_checkers is 0, then there can be no race. set_in_sync() will
wait in percpu_ref_switch_to_atomic_sync() for an RCU grace period,
and as md_write_start() holds the rcu_read_lock(), set_in_sync() will
be sure ot see the update to writes_pending.
If sync_checkers is > 0, there could be race. If md_write_start()
happened entirely between
if (!mddev->in_sync &&
percpu_ref_is_zero(&mddev->writes_pending)) {
and
mddev->in_sync = 1;
in set_in_sync(), then it would not see that is_sync had been set,
and set_in_sync() would not see that writes_pending had been
incremented.
This bug means that in_sync is sometimes not set when it should be.
Consequently there is a small chance that the array will be marked as
"clean" when in fact it is inconsistent.
Fixes: 4ad23a9764 ("MD: use per-cpu counter for writes_pending")
cc: stable@vger.kernel.org (v4.12+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
If ->safemode == 1, md_check_recovery() will try to get the mddev lock
and perform various other checks.
If mddev->in_sync is zero, it will call set_in_sync, and clear
->safemode. However if mddev->in_sync is not zero, ->safemode will not
be cleared.
When md_check_recovery() drops the mddev lock, the thread is woken
up again. Normally it would just check if there was anything else to
do, find nothing, and go to sleep. However as ->safemode was not
cleared, it will take the mddev lock again, then wake itself up
when unlocking.
This results in an infinite loop, repeatedly calling
md_check_recovery(), which RCU or the soft-lockup detector
will eventually complain about.
Prior to commit 4ad23a9764 ("MD: use per-cpu counter for
writes_pending"), safemode would only be set to one when the
writes_pending counter reached zero, and would be cleared again
when writes_pending is incremented. Since that patch, safemode
is set more freely, but is not reliably cleared.
So in md_check_recovery() clear ->safemode before checking ->in_sync.
Fixes: 4ad23a9764 ("MD: use per-cpu counter for writes_pending")
Cc: stable@vger.kernel.org (4.12+)
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reported-by: David R <david@unsolicited.net>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
There are quite a number of occurrences in the kernel of the pattern
if (dst != src)
memcpy(dst, src, walk.total % AES_BLOCK_SIZE);
crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE);
or
crypto_xor(keystream, src, nbytes);
memcpy(dst, keystream, nbytes);
where crypto_xor() is preceded or followed by a memcpy() invocation
that is only there because crypto_xor() uses its output parameter as
one of the inputs. To avoid having to add new instances of this pattern
in the arm64 code, which will be refactored to implement non-SIMD
fallbacks, add an alternative implementation called crypto_xor_cpy(),
taking separate input and output arguments. This removes the need for
the separate memcpy().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull MD fixes from Shaohua Li:
"This fixes several bugs, three of them are marked for stable:
- an initialization issue fixed by Ming
- a bio clone race issue fixed by me
- an async tx flush issue fixed by Ofer
- other cleanups"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
MD: fix warnning for UP case
md/raid5: add thread_group worker async_tx_issue_pending_all
md: simplify code with bio_io_error
md/raid1: fix writebehind bio clone
md: raid1-10: move raid1/raid10 common code into raid1-10.c
md: raid1/raid10: initialize bvec table via bio_add_page()
md: remove 'idx' from 'struct resync_pages'
inefficiencies in the on-disk journal device layout. Another that
makes use of the block layer's on-stack plugging when writing the
journal.
- A dm-bufio fix for the blk_status_t conversion that went in during the
merge window.
- A few DM raid fixes that address correctness when suspending the
device and a validation fix for validation that occurs during device
activation.
- A couple DM zoned target fixes. Important one being the fix to not
use GFP_KERNEL in the IO path due to concerns about deadlock in
low-memory conditions (e.g. swap over a DM zoned device, etc).
- A DM DAX device fix to make sure dm_dax_flush() is called if the
underlying DAX device is operating as a write cache.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZe13OAAoJEMUj8QotnQNav/gIAMXMUbXlYHVikVNq+6rNkXRk
FlsltNcJEDeZCit0nJd/2nOWGpssXdz+7cJTUU28Kp+3IscIolSHS51bzfSFI05V
7LbYqEX1EdXkTwEeYfHlAoOexvj4oarpAWWQF/ACU8rHCruaqfqIa57mstxLoyDY
XcxsIY/fds6GZViLB0MD/jBAKaLWX90aFZ9MQcF7AmdpMr56kCO2PUhiqHcrN47t
BjH7E5QSKGl2pMND1bR6pleWFw8HB7h82Qjaasd5bQuVWseQ4u9Illxny6bhhk2E
BiEWjzFvZB+JL1zl7JIXnBjhdmbwgAVvoW6EqHuVzHuR0X8gylBF2gDLnSzUZu4=
=3MxS
-----END PGP SIGNATURE-----
Merge tag 'for-4.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a few DM integrity fixes that improve performance. One that address
inefficiencies in the on-disk journal device layout. Another that
makes use of the block layer's on-stack plugging when writing the
journal.
- a dm-bufio fix for the blk_status_t conversion that went in during
the merge window.
- a few DM raid fixes that address correctness when suspending the
device and a validation fix for validation that occurs during device
activation.
- a couple DM zoned target fixes. Important one being the fix to not
use GFP_KERNEL in the IO path due to concerns about deadlock in
low-memory conditions (e.g. swap over a DM zoned device, etc).
- a DM DAX device fix to make sure dm_dax_flush() is called if the
underlying DAX device is operating as a write cache.
* tag 'for-4.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm, dax: Make sure dm_dax_flush() is called if device supports it
dm verity fec: fix GFP flags used with mempool_alloc()
dm zoned: use GFP_NOIO in I/O path
dm zoned: remove test for impossible REQ_OP_FLUSH conditions
dm raid: bump target version
dm raid: avoid mddev->suspended access
dm raid: fix activation check in validate_raid_redundancy()
dm raid: remove WARN_ON() in raid10_md_layout_to_format()
dm bufio: fix error code in dm_bufio_write_dirty_buffers()
dm integrity: test for corrupted disk format during table load
dm integrity: WARN_ON if variables representing journal usage get out of sync
dm integrity: use plugging when writing the journal
dm integrity: fix inefficient allocation of journal space
Currently dm_dax_flush() is not being called, even if underlying dax
device supports write cache, because DAXDEV_WRITE_CACHE is not being
propagated up to the DM dax device.
If the underlying dax device supports write cache, set
DAXDEV_WRITE_CACHE on the DM dax device. This will cause dm_dax_flush()
to be called.
Fixes: abebfbe2f7 ("dm: add ->flush() dax operation support")
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
mempool_alloc() cannot fail for GFP_NOIO allocation, so there is no
point testing for failure.
One place the code tested for failure was passing "0" as the GFP
flags. This is most unusual and is probably meant to be GFP_NOIO,
so that is changed.
Also, allocation from ->extra_pool and ->prealloc_pool are repeated
before releasing the previous allocation. This can deadlock if the code
is servicing a write under high memory pressure. To avoid deadlocks,
change these to use GFP_NOWAIT and leave the error handling in place.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use GFP_NOIO for memory allocations in the I/O path. Other memory
allocations in the initialization path can use GFP_KERNEL.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Zhai Zhaoxuan