Commit Graph

3022 Commits

Author SHA1 Message Date
Roland Dreier 20952cdd8e Merge branches 'cxgb4', 'mlx4' and 'ocrdma' into for-linus 2012-06-06 10:08:11 -07:00
Sagi Grimberg fc2d004419 IB/mlx4: Fix max_wqe capacity reported from query device
1. Limit the max number of WQEs per QP reported when querying the
   device, so that ib_create_qp() will not fail for a QP size that the
   device claimed to support due to additional headroom WQEs being
   allocated.

2. Limit qp resources accepted for ib_create_qp() to the limits
   reported in ib_query_device().  In kernel space, make sure that the
   limits returned to the caller following qp creation also lie within
   the reported device limits. For userspace, report as before, and do
   adjustment in libmlx4 (so as not to break ABI).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Sagi Grimberg <sagig@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-06 10:08:03 -07:00
Shlomo Pongratz 3aac6ff16a IB/mlx4: Fix EQ deallocation in legacy mode
Commit e605b743f3 ("IB/mlx4: Increase the number of vectors (EQs)
available for ULPs") didn't handle correctly the case where there
aren't enough MSI-X vectors to increase the number of EQs, so only the
legacy EQs are allocated.  This results in an attempt to memset() to
zero the EQ table which was never allocated and a kernel crash.

Fix this by checking in the teardown flow if the table of EQs was ever
allocated.  Also remove some unneeded setting to zero of the EQ
related fields in struct mlx4_ib_dev.

Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-03 23:02:16 -07:00
Thadeu Lima de Souza Cascardo 71b43fd573 RDMA/cxgb4: Fix crash when peer address is 0.0.0.0
When using rping -c -a 0.0.0.0 with iw_cxgb4, the system crashes when
rdma_connect() is called.  ip_dev_find() will return NULL, but pdev is
accessed anyway.

Checking that pdev is NULL and returning -ENODEV prevents the system
from crashing.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-03 22:59:15 -07:00
Devendra Naga 7ad5e449b9 RDMA/ocrdma: Remove unnecessary version.h includes
"make versioncheck" shows:

    drivers/infiniband/hw/ocrdma/ocrdma_main.c: 29 linux/version.h not needed.
    drivers/infiniband/hw/ocrdma/ocrdma_verbs.h: 31 linux/version.h not needed.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-29 12:53:11 -07:00
Parav Pandit 804eaf29ba RDMA/ocrdma: Fix signaled event for SRQ_LIMIT_REACHED
Signed-off-by: Parav Pandit <parav.pandit@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-29 12:52:00 -07:00
Parav Pandit cd4fedf9cf RDMA/ocrdma: Correct queue free count math
Correct queue free count math for SQ, RQ for all hardware type.
Update user-kernel ABI interface.

Signed-off-by: Parav Pandit <parav.pandit@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-29 12:49:36 -07:00
Linus Torvalds c23ddf7857 InfiniBand/RDMA changes for the 3.5 merge window:
- Add ocrdma hardware driver for Emulex IB-over-Ethernet adapters
  - Add generic and mlx4 support for "raw" QPs: allow suitably privileged
    applications to send and receive arbitrary packets directly to/from
    the hardware
  - Add "doorbell drop" handling to the cxgb4 driver
  - A fairly large batch of qib hardware driver changes
  - A few fixes for lockdep-detected issues
  - A few other miscellaneous fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJPumbZAAoJEENa44ZhAt0h8LgP/0fXe7Szm3n6P6UvMAVqkagM
 4PpreH3mpWUFpzqeQE1JPDtgx700R6aPipbHqgIN+k61RWMpLjICGcNx7iwxn1I+
 zqdquGygWgjceLz+BLVlk+iBmJt3vZ3fPRAXc7fdP+jhIarWkNIOy1pXWTUuRvED
 jL8jIaxhCcgAVzm/zNyt6IPxkaHvCz7K9wqmpyU0dsO9OyPdGvWA9+CkGXwmOCPq
 mxSVhWnfGsMkPBsL7EgTC5KP/ox2PKq6rFgysmVVS+rKCpP0L8BEVQyGX3Gf8KA8
 yV+KdTi9ofDnFrv6R7Wz0v7HRUih8GRssakzBu7Y7HLfK1M/QwMG0GUAibXGZObc
 vUXuQ3uRJ/cIzMPXqKeGYwpb5t+TmxyjhWu44OjCUQkNau91+9BSbA69S88KXc49
 aTJiCZlhPuGf4uGMWJJuPLcE2xO2QCZj+8ckL2STYrIip6GWlCH02kJaQmRkuWH2
 UhMOeJDBC4nvh4EQT/WwHpGzyhkavE2ayfo5YemxBJXo+P5Mdbf7WIDRQDLUEeQH
 F8sPoccH4hDiAorN/SkTsm14jVTP7oWW1M40Ont59Nhbgm88MsVkvjoneHnfBvbD
 HjK92soCWnYTAoREfj0G4xUxZgMdOZcezWrX0rx5LJ8Ju9y4zAi3cKGr7lg6hs4X
 syKfN0VjiDRtJ+pxayi3
 =yWfr
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull InfiniBand/RDMA changes from Roland Dreier:
 - Add ocrdma hardware driver for Emulex IB-over-Ethernet adapters
 - Add generic and mlx4 support for "raw" QPs: allow suitably privileged
   applications to send and receive arbitrary packets directly to/from
   the hardware
 - Add "doorbell drop" handling to the cxgb4 driver
 - A fairly large batch of qib hardware driver changes
 - A few fixes for lockdep-detected issues
 - A few other miscellaneous fixes and cleanups

Fix up trivial conflict in drivers/net/ethernet/emulex/benet/be.h.

* tag 'rdma-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (53 commits)
  RDMA/cxgb4: Include vmalloc.h for vmalloc and vfree
  IB/mlx4: Fix mlx4_ib_add() error flow
  IB/core: Fix IB_SA_COMP_MASK macro
  IB/iser: Fix error flow in iser ep connection establishment
  IB/mlx4: Increase the number of vectors (EQs) available for ULPs
  RDMA/cxgb4: Add query_qp support
  RDMA/cxgb4: Remove kfifo usage
  RDMA/cxgb4: Use vmalloc() for debugfs QP dump
  RDMA/cxgb4: DB Drop Recovery for RDMA and LLD queues
  RDMA/cxgb4: Disable interrupts in c4iw_ev_dispatch()
  RDMA/cxgb4: Add DB Overflow Avoidance
  RDMA/cxgb4: Add debugfs RDMA memory stats
  cxgb4: DB Drop Recovery for RDMA and LLD queues
  cxgb4: Common platform specific changes for DB Drop Recovery
  cxgb4: Detect DB FULL events and notify RDMA ULD
  RDMA/cxgb4: Drop peer_abort when no endpoint found
  RDMA/cxgb4: Always wake up waiters in c4iw_peer_abort_intr()
  mlx4_core: Change bitmap allocator to work in round-robin fashion
  RDMA/nes: Don't call event handler if pointer is NULL
  RDMA/nes: Fix for the ORD value of the connecting peer
  ...
2012-05-21 17:54:55 -07:00
Linus Torvalds c9bfa7d75b Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull scsi-target changes from Nicholas Bellinger:
 "There has been lots of work in existing code in a number of areas this
  past cycle.  The major highlights have been:

   * Removal of transport_do_task_sg_chain() from core + fabrics
     (Roland)
   * target-core: Removal of se_task abstraction from target-core and
     enforce hw_max_sectors for pSCSI backends (hch)
   * Re-factoring of iscsi-target tx immediate/response queues (agrover)
   * Conversion of iscsi-target back to using target core memory
     allocation logic (agrover)

  We've had one last minute iscsi-target patch go into for-next to
  address a nasty regression bug related to the target core allocation
  logic conversion from agrover that is not included in friday's
  linux-next build, but has been included in this series.

  On the new fabric module code front for-3.5, here is a brief status
  update for the three currently in flight this round:

   * usb-gadget target driver:

  Sebastian Siewior's driver for supporting usb-gadget target mode
  operation.  This will be going out as a separate PULL request from
  target-pending/usb-target-merge with subsystem maintainer ACKs.  There
  is one minor target-core patch in this series required to function.

   * sbp ieee-1394/firewire target driver:

  Chris Boot's driver for supportting the Serial Block Protocol (SBP)
  across IEEE-1394 Firewire hardware.  This will be going out as a
  separate PULL request from target-pending/sbp-target-merge with two
  additional drivers/firewire/ patches w/ subsystem maintainer ACKs.

   * qla2xxx LLD target mode infrastructure changes + tcm_qla2xxx:

  The Qlogic >= 24xx series HW target mode LLD infrastructure patch-set
  and tcm_qla2xxx fabric driver.  Support for FC target mode using
  qla2xxx LLD code has been officially submitted by Qlogic to James
  below, and is currently outstanding but not yet merged into
  scsi.git/for-next..

    [PATCH 00/22] qla2xxx: Updates for scsi "misc" branch
    http://www.spinics.net/lists/linux-scsi/msg59350.html

  Note there are *zero* direct dependencies upon this for-next series
  for the qla2xxx LLD target + tcm_qla2xxx patches submitted above, and
  over the last days the target mode team has been tracking down an
  tcm_qla2xxx specific active I/O shutdown bug that appears to now be
  almost squashed for 3.5-rc-fixes."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (47 commits)
  iscsi-target: Fix iov_count calculation bug in iscsit_allocate_iovecs
  iscsi-target: remove dead code in iscsi_check_valuelist_for_support
  target: Handle ATA_16 passthrough for pSCSI backend devices
  target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attribute
  target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits
  target: add support for the WRITE_VERIFY command
  target: make target_put_session void
  target: cleanup transport_execute_tasks()
  target: Remove max_sectors device attribute for modern se_task less code
  target: lock => unlock typo in transport_lun_wait_for_tasks
  target: Enforce hw_max_sectors for SCF_SCSI_DATA_SG_IO_CDB
  target: remove the t_se_count field in struct se_cmd
  target: remove the t_task_cdbs_ex_left field in struct se_cmd
  target: remove the t_task_cdbs_left field in struct se_cmd
  target: remove struct se_task
  target: move the state and execute lists to the command
  target: simplify command to task linkage
  target: always allocate a single task
  target: replace ->execute_task with ->execute_cmd
  target: remove the task_sectors field in struct se_task
  ...
2012-05-21 17:37:09 -07:00
Roland Dreier cc169165c8 Merge branches 'core', 'cxgb4', 'ipath', 'iser', 'lockdep', 'mlx4', 'nes', 'ocrdma', 'qib' and 'raw-qp' into for-linus 2012-05-21 09:00:47 -07:00
Vipul Pandya e572568fbc RDMA/cxgb4: Include vmalloc.h for vmalloc and vfree
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-21 09:00:34 -07:00
Jack Morgenstein 035b1032b5 IB/mlx4: Fix mlx4_ib_add() error flow
We need to use a different loop index for mlx4_counter_alloc() and for
device_create_file() iterations: the mlx4_counter_alloc() loop index
is used in the error flow to free counters.

If the same loop index is used for device_create_file() and, say, the
device_create_file() loop fails on the first iteration, the allocated
counters will not be freed.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 17:45:01 -07:00
Or Gerlitz 7d9c0de4ab IB/iser: Fix error flow in iser ep connection establishment
The current error flow code was releasing the IB connection object and
calling iscsi_destroy_endpoint() directly without going through the
reference counting mechanism introduced in commit 39ff05d ("IB/iser:
Enhance disconnection logic for multi-pathing"). This resulted in a
double free of the iscsi endpoint object, which causes a kernel NULL
pointer dereference.  Fix that by plugging into the IB conn reference
counting correctly.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 17:05:31 -07:00
Shlomo Pongratz e605b743f3 IB/mlx4: Increase the number of vectors (EQs) available for ULPs
Enable IB ULPs to use a larger portion of the device EQs (which map to
IRQs).  The mlx4_ib driver follows the mlx4_core framework of the EQs
to be divided among the device ports.  In this scheme, for each IB
port, the number of allocated EQs follows the number of cores, subject
to other system constraints, such as number available MSI-X vectors.

Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 17:04:00 -07:00
Vipul Pandya 67bbc05512 RDMA/cxgb4: Add query_qp support
This allows querying the QP state before flushing.

Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 13:22:37 -07:00
Vipul Pandya ec3eead217 RDMA/cxgb4: Remove kfifo usage
Using kfifos for ID management was limiting the number of QPs and
preventing NP384 MPI jobs.  So replace it with a simple bitmap
allocator.

Remove IDs from the IDR tables before deallocating them.  This bug was
causing the BUG_ON() in insert_handle() to fire because the ID was
getting reused before being removed from the IDR table.

Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 13:22:36 -07:00
Vipul Pandya d716a2a014 RDMA/cxgb4: Use vmalloc() for debugfs QP dump
This allows dumping thousands of QPs.  Log active open failures of
interest.

Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 13:22:35 -07:00
Vipul Pandya 422eea0a8c RDMA/cxgb4: DB Drop Recovery for RDMA and LLD queues
Add module option db_fc_threshold which is the count of active QPs
that trigger automatic db flow control mode.  Automatically transition
to/from flow control mode when the active qp count crosses
db_fc_theshold.

Add more db debugfs stats

On DB DROP event from the LLD, recover all the iwarp queues.

Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 13:22:33 -07:00
Vipul Pandya 4984037bef RDMA/cxgb4: Disable interrupts in c4iw_ev_dispatch()
Use GFP_ATOMIC in _insert_handle() if ints are disabled.

Don't panic if we get an abort with no endpoint found.  Just log a
warning.

Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 13:22:32 -07:00
Vipul Pandya 2c97478106 RDMA/cxgb4: Add DB Overflow Avoidance
Get FULL/EMPTY/DROP events from LLD.  On FULL event, disable normal
user mode DB rings.

Add modify_qp semantics to allow user processes to call into the
kernel to ring doobells without overflowing.

Add DB Full/Empty/Drop stats.

Mark queues when created indicating the doorbell state.

If we're in the middle of db overflow avoidance, then newly created
queues should start out in this mode.

Bump the C4IW_UVERBS_ABI_VERSION to 2 so the user mode library can
know if the driver supports the kernel mode db ringing.

Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 13:22:31 -07:00
Vipul Pandya 8d81ef34b2 RDMA/cxgb4: Add debugfs RDMA memory stats
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 13:22:29 -07:00
Steve Wise 14b9222808 RDMA/cxgb4: Drop peer_abort when no endpoint found
Log a warning and drop the abort message.  Otherwise we will do a
bogus wake_up() and crash.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-15 09:46:09 -07:00
Steve Wise 0f1dcfae6b RDMA/cxgb4: Always wake up waiters in c4iw_peer_abort_intr()
This fixes a race where an ingress abort fails to wake up the thread
blocked in rdma_init() causing the app to hang.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-15 09:46:04 -07:00
Tatyana Nikolova 784d135f96 RDMA/nes: Don't call event handler if pointer is NULL
Don't call the ibqp event_handler pointer in the case it wasn't initialized.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Donald Wood <Donald.E.Wood@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14 12:48:07 -07:00
Tatyana Nikolova d3e5132814 RDMA/nes: Fix for the ORD value of the connecting peer
Set ORD value of the connecting peer to be at least one in order to
accommodate an RDMA READ Request message.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Donald Wood <Donald.E.Wood@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14 12:47:18 -07:00
Mike Marciniszyn 1c94283ddb IB/qib: Add cache line awareness to qib_qp and qib_devdata structures
This patch reorganizes the QP and devdata files to be more cache line aware.

qib_qp fields in particular are split into read-mostly, send, and receive fields.

qib_devdata fields are split into read-mostly and read/write fields

Testing has show that bidirectional tests improve by as much as 100%
with this patch.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14 12:43:34 -07:00
Jim Foraker 3236b2d469 IB/qib: MADs with misset M_Keys should return failure
If a MAD is sent directly to the local HCA rather than placed on a QP
and the MAD fails M_Key checks, there is no means to generate a
timeout for the client, which may hang.  Instead we report
IB_MAD_RESULT_FAILURE, which operates the same for on-the-wire
packets, but will generate a send failure back to the client.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jim Foraker <foraker1@llnl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14 12:42:44 -07:00
Jim Foraker 6199c8961e IB/qib: Fix M_Key lease timeout handling
If a port has an M_Key lease set, the M_Key protect bits set to 1, and
a SubnSet arrives with an invalid M_Key, an M_Key mismatch trap is
generated, the lease timer begins as expected, and eventually the
M_Key protect bits will be set back to 0 as per the spec.  However, if
any other SMP with an invalid M_Key arrives, the lease timer is expired
and the M_Key protect bits remain in force.

This is not according to to spec.  In particular, C14-17 says that
a lease timer that is underway is not affected by protection level
checks (ie, at protection level 1, a SubnGet with a bad M_Key may be
successful, but does not stop the timer), and C14-19 says that the timer
shall stop when a valid M_Key has been received.  C14-19 is the only
compliance statement that specifies a stopping condition for the timer.

This behavior is magnified if the port's Master SM LID attribute
points at itself.  In that case, the M_Key mismatch trap is sufficient to
expire the timer, and the mkey lease attribute is rendered useless.

Reviewed-by: Ram Vepa <ram.vepa@qlogic.com>
Signed-off-by: Jim Foraker <foraker1@llnl.gov>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14 12:42:42 -07:00
Mitko Haralanov f665acb3cb IB/qib: Fix QLE734X link cycling
The SERDES was using the incorrect Frequency Loop Bandwidth setting
causing the link to cycle through the Physical link negotiation state
machine.  Fixing the Frequency Loop Bandwidth setting in the SERDES
helps the link come up faster and more reliably.

Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14 12:39:26 -07:00
Mitko Haralanov 6ceaadee34 IB/qib: Display correct value for number of contexts
A "fix" for a bug with the number of contexts on a single-port board
caused the calculation to be off by one, which causes problems with
the upper layers.  The same problem exists for number of free
contexts, which is also fixed here.

Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14 12:39:04 -07:00
Todd Rimmer 4ccf28a26c IB/qib: Correct ordering of reregister vs. port active events
When a port first goes active with SMA Set(PortInfo) and reregister
bit set, the driver sends up the reregister event followed by a port
active event.

The problem is that in response to reregister event most apps try to
issue a SA query of some sort, but that fails because port is not
active.

The qib driver needs to a trivial change to correct this behavior.

This issue has been there for a while; however the recent serdes work
has probably made the delay between the reregister event and the
active event larger and hence opened the race far enough so that its
being seen more often.

The patch also changes the clientrereg local to a u8 and saves off the
rereg bit into it.  The code following the nested subn_get_portinfo()
now restores that bit per o14-12.2.1 with a logical OR from that copy.

Reviewed-by: Ram Vepa <ram.vepa@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14 12:38:28 -07:00
Mike Marciniszyn bb77a07723 IB/qib: Optimize pio ack buffer allocation
This patch optimizes pio buffer allocation in the kernel.

For qib, kernel pio buffers are used for sending acks.  The code to
allocate the buffer would always start at 0 until it found a buffer.

This means that an average of 64 comparisions were done on each
allocate, since the busy bit won't be cleared until the bits are
refreshed when buffers are exhausted.

This patch adds two new fields in the devdata struct, last_pio and
min_kernel_pio.  last_pio is the last buffer that was allocated.
min_kernel_pio is the lowest potential available buffer.

min_kernel_pio is modifed as contexts are allocated and deallocted.

Reviewed-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14 12:37:03 -07:00
Mike Marciniszyn cca195a168 IB/qib: Add prefetch for eager buffers
Add a prefetch call when a packet has been stored.  The nature of the
prefetch is correctly determined by the alternatives mechanism.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14 12:36:18 -07:00
Yishai Hadas c4870eb874 IB/core: Fix mismatch between locked and pinned pages
Commit bc3e53f682 ("mm: distinguish between mlocked and pinned
pages") introduced a separate counter for pinned pages and used it in
the IB stack.  However, in ib_umem_get() the pinned counter is
incremented, but ib_umem_release() wrongly decrements the locked
counter.  Fix this.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-11 11:38:22 -07:00
Shlomo Pongratz 987c8f8fc9 IB/mlx4: Replace printk(KERN_yyy...) with pr_yyy(...)
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>

[ Replace one more printk_once() with pr_info_once().  - Roland ]

Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:59:36 -07:00
Oren Duer c0c1d3d761 IB/mlx4: Put priority bits in WQE of IBoE MLX QP
Otherwise CM packets going over MLX QP1 get fixed scheduling priority 0.
We want CM packets to get the same scheduling priority, and therefore
map to the same SQ (Schedule Queue) and eventually TC (Traffic Class),
as the application requested for the actual QP used for the connection.

Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:48:09 -07:00
Or Gerlitz 3987a2d319 IB/mlx4: Add raw packet QP support
Implement raw packet QPs for Ethernet ports using the MLX transport (as
done by the mlx4_en Ethernet netdevice driver).

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:18:09 -07:00
Or Gerlitz c938a616aa IB/core: Add raw packet QP type
IB_QPT_RAW_PACKET allows applications to build a complete packet,
including L2 headers, when sending; on the receive side, the HW will
not strip any headers.

This QP type is designed for userspace direct access to Ethernet; for
example by applications that do TCP/IP themselves.  Only processes
with the NET_RAW capability are allowed to create raw packet QPs (the
name "raw packet QP" is supposed to suggest an analogy to AF_PACKET /
SOL_RAW sockets).

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:18:09 -07:00
Roland Dreier 349556692d RDMA/ocrdma: Fix build with IPV6=n
When IPV6 is not enabled:

    ERROR: "register_inet6addr_notifier" [drivers/infiniband/hw/ocrdma/ocrdma.ko] undefined!
    ERROR: "unregister_inet6addr_notifier" [drivers/infiniband/hw/ocrdma/ocrdma.ko] undefined!

Fix this by wrapping the inet6 calls in #ifdef IPV6.  Also make the
ocrdma module depend on (IPV6 || IPV6=n) to forbid the case of modular
ipv6 but built-in ocrdma (which can't work, because ocrdma calls ipv6
functions).

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:49 -07:00
Dan Carpenter d19081e044 RDMA/ocrdma: Tiny locking cleanup
We only need to disable the IRQs one time.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

[ Rename "wq_flags" to more conventional "flags."  - Roland ]

Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:49 -07:00
Dan Carpenter 55a8d62a3b RDMA/ocrdma: Fix check for NULL instead of IS_ERR
The ocrdma_alloc_lkey() function never returns NULL pointers -- it
returns ERR_PTRs.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:49 -07:00
Sasha Levin 3e4d60a82e RDMA/ocrdma: Don't sleep in atomic notifier handler
Events sent to ocrdma_inet6addr_event() are sent from an atomic context,
therefore we can't try to lock a mutex within the notifier callback.

We could just switch the mutex to a spinlock since all it does it
protect a list, but I've gone ahead and switched the list to use RCU
instead.  I couldn't fully test it since I don't have IB hardware, so
if it doesn't fully work for some reason let me know and I'll switch
it back to using a spinlock.

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>

[ Fixed locking in ocrdma_add().  - Roland ]

Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:48 -07:00
Roland Dreier c592c42331 RDMA/ocrdma: Remove write-only variables
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:48 -07:00
Roland Dreier e9db29534d RDMA/ocrdma: Set event's device member in ocrdma_dispatch_ibevent()
We need to set ib_evt.device, or else ib_dispatch_event() will crash
when we call it for unaffiliated events (and consumers may get
confused in their QP/CQ/SRQ event handler for affiliated events).

Also fix sparse warning:

    drivers/infiniband/hw/ocrdma/ocrdma_hw.c:678:36: warning: Using plain integer as NULL pointer

There's no need to clear ib_evt, since every member is initialized.

Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:48 -07:00
Roland Dreier abe3afacc5 RDMA/ocrdma: Make needlessly global functions/structs static
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:48 -07:00
Roland Dreier da4964387d RDMA/ocrdma: Fix warnings about uninitialized variables
First, fix

    drivers/infiniband/hw/ocrdma/ocrdma_verbs.c: In function 'ocrdma_alloc_pd':
    drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:371:17: warning: 'dpp_page_addr' may be used uninitialized in this function [-Wuninitialized]
    drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:337:6: note: 'dpp_page_addr' was declared here

which seems that it may border on a bug (the call to ocrdma_del_mmap()
might conceivably do bad things if pd->dpp_enabled is not set and
dpp_page_addr ends up with just the wrong value).

Also take care of:

    drivers/infiniband/hw/ocrdma/ocrdma_hw.c: In function 'ocrdma_init_hw':
    drivers/infiniband/hw/ocrdma/ocrdma_hw.c:2587:5: warning: 'status' may be used uninitialized in this function [-Wuninitialized]
    drivers/infiniband/hw/ocrdma/ocrdma_hw.c:2549:17: note: 'status' was declared here

which is only real if num_eq == 0, which should be impossible.

Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:47 -07:00
Parav Pandit fe2caefcdf RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter
Signed-off-by: Parav Pandit <parav.pandit@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:47 -07:00
Sean Hefty b6cec8aa4a RDMA/cma: Fix lockdep false positive recursive locking
The following lockdep problem was reported by Or Gerlitz <ogerlitz@mellanox.com>:

    [ INFO: possible recursive locking detected ]
    3.3.0-32035-g1b2649e-dirty #4 Not tainted
    ---------------------------------------------
    kworker/5:1/418 is trying to acquire lock:
     (&id_priv->handler_mutex){+.+.+.}, at: [<ffffffffa0138a41>] rdma_destroy_i    d+0x33/0x1f0 [rdma_cm]

    but task is already holding lock:
     (&id_priv->handler_mutex){+.+.+.}, at: [<ffffffffa0135130>] cma_disable_ca    llback+0x24/0x45 [rdma_cm]

    other info that might help us debug this:
     Possible unsafe locking scenario:

           CPU0
           ----
      lock(&id_priv->handler_mutex);
      lock(&id_priv->handler_mutex);

     *** DEADLOCK ***

     May be due to missing lock nesting notation

    3 locks held by kworker/5:1/418:
     #0:  (ib_cm){.+.+.+}, at: [<ffffffff81042ac1>] process_one_work+0x210/0x4a    6
     #1:  ((&(&work->work)->work)){+.+.+.}, at: [<ffffffff81042ac1>] process_on    e_work+0x210/0x4a6
     #2:  (&id_priv->handler_mutex){+.+.+.}, at: [<ffffffffa0135130>] cma_disab    le_callback+0x24/0x45 [rdma_cm]

    stack backtrace:
    Pid: 418, comm: kworker/5:1 Not tainted 3.3.0-32035-g1b2649e-dirty #4
    Call Trace:
     [<ffffffff8102b0fb>] ? console_unlock+0x1f4/0x204
     [<ffffffff81068771>] __lock_acquire+0x16b5/0x174e
     [<ffffffff8106461f>] ? save_trace+0x3f/0xb3
     [<ffffffff810688fa>] lock_acquire+0xf0/0x116
     [<ffffffffa0138a41>] ? rdma_destroy_id+0x33/0x1f0 [rdma_cm]
     [<ffffffff81364351>] mutex_lock_nested+0x64/0x2ce
     [<ffffffffa0138a41>] ? rdma_destroy_id+0x33/0x1f0 [rdma_cm]
     [<ffffffff81065a78>] ? trace_hardirqs_on_caller+0x11e/0x155
     [<ffffffff81065abc>] ? trace_hardirqs_on+0xd/0xf
     [<ffffffffa0138a41>] rdma_destroy_id+0x33/0x1f0 [rdma_cm]
     [<ffffffffa0139c02>] cma_req_handler+0x418/0x644 [rdma_cm]
     [<ffffffffa012ee88>] cm_process_work+0x32/0x119 [ib_cm]
     [<ffffffffa0130299>] cm_req_handler+0x928/0x982 [ib_cm]
     [<ffffffffa01302f3>] ? cm_req_handler+0x982/0x982 [ib_cm]
     [<ffffffffa0130326>] cm_work_handler+0x33/0xfe5 [ib_cm]
     [<ffffffff81065a78>] ? trace_hardirqs_on_caller+0x11e/0x155
     [<ffffffffa01302f3>] ? cm_req_handler+0x982/0x982 [ib_cm]
     [<ffffffff81042b6e>] process_one_work+0x2bd/0x4a6
     [<ffffffff81042ac1>] ? process_one_work+0x210/0x4a6
     [<ffffffff813669f3>] ? _raw_spin_unlock_irq+0x2b/0x40
     [<ffffffff8104316e>] worker_thread+0x1d6/0x350
     [<ffffffff81042f98>] ? rescuer_thread+0x241/0x241
     [<ffffffff81046a32>] kthread+0x84/0x8c
     [<ffffffff8136e854>] kernel_thread_helper+0x4/0x10
     [<ffffffff81366d59>] ? retint_restore_args+0xe/0xe
     [<ffffffff810469ae>] ? __init_kthread_worker+0x56/0x56
     [<ffffffff8136e850>] ? gs_change+0xb/0xb

The actual locking is fine, since we're dealing with different locks,
but from the same lock class.  cma_disable_callback() acquires the
listening id mutex, whereas rdma_destroy_id() acquires the mutex for
the new connection id.  To fix this, delay the call to
rdma_destroy_id() until we've released the listening id mutex.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:34 -07:00
Roland Dreier 5909ce545d IB/uverbs: Lock SRQ / CQ / PD objects in a consistent order
Since XRC support was added, the uverbs code has locked SRQ, CQ and PD
objects needed during QP and SRQ creation in different orders
depending on the the code path.  This leads to the (at least
theoretical) possibility of deadlock, and triggers the lockdep splat
below.

Fix this by making sure we always lock the SRQ first, then CQs and
finally the PD.

    ======================================================
    [ INFO: possible circular locking dependency detected ]
    3.4.0-rc5+ #34 Not tainted
    -------------------------------------------------------
    ibv_srq_pingpon/2484 is trying to acquire lock:
     (SRQ-uobj){+++++.}, at: [<ffffffffa00af51b>] idr_read_uobj+0x2f/0x4d [ib_uverbs]

    but task is already holding lock:
     (CQ-uobj){+++++.}, at: [<ffffffffa00af51b>] idr_read_uobj+0x2f/0x4d [ib_uverbs]

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #2 (CQ-uobj){+++++.}:
           [<ffffffff81070fd0>] lock_acquire+0xbf/0xfe
           [<ffffffff81384f28>] down_read+0x34/0x43
           [<ffffffffa00af51b>] idr_read_uobj+0x2f/0x4d [ib_uverbs]
           [<ffffffffa00af542>] idr_read_obj+0x9/0x19 [ib_uverbs]
           [<ffffffffa00b16c3>] ib_uverbs_create_qp+0x180/0x684 [ib_uverbs]
           [<ffffffffa00ae3dd>] ib_uverbs_write+0xb7/0xc2 [ib_uverbs]
           [<ffffffff810fe47f>] vfs_write+0xa7/0xee
           [<ffffffff810fe65f>] sys_write+0x45/0x69
           [<ffffffff8138cdf9>] system_call_fastpath+0x16/0x1b

    -> #1 (PD-uobj){++++++}:
           [<ffffffff81070fd0>] lock_acquire+0xbf/0xfe
           [<ffffffff81384f28>] down_read+0x34/0x43
           [<ffffffffa00af51b>] idr_read_uobj+0x2f/0x4d [ib_uverbs]
           [<ffffffffa00af542>] idr_read_obj+0x9/0x19 [ib_uverbs]
           [<ffffffffa00af8ad>] __uverbs_create_xsrq+0x96/0x386 [ib_uverbs]
           [<ffffffffa00b31b9>] ib_uverbs_detach_mcast+0x1cd/0x1e6 [ib_uverbs]
           [<ffffffffa00ae3dd>] ib_uverbs_write+0xb7/0xc2 [ib_uverbs]
           [<ffffffff810fe47f>] vfs_write+0xa7/0xee
           [<ffffffff810fe65f>] sys_write+0x45/0x69
           [<ffffffff8138cdf9>] system_call_fastpath+0x16/0x1b

    -> #0 (SRQ-uobj){+++++.}:
           [<ffffffff81070898>] __lock_acquire+0xa29/0xd06
           [<ffffffff81070fd0>] lock_acquire+0xbf/0xfe
           [<ffffffff81384f28>] down_read+0x34/0x43
           [<ffffffffa00af51b>] idr_read_uobj+0x2f/0x4d [ib_uverbs]
           [<ffffffffa00af542>] idr_read_obj+0x9/0x19 [ib_uverbs]
           [<ffffffffa00b1728>] ib_uverbs_create_qp+0x1e5/0x684 [ib_uverbs]
           [<ffffffffa00ae3dd>] ib_uverbs_write+0xb7/0xc2 [ib_uverbs]
           [<ffffffff810fe47f>] vfs_write+0xa7/0xee
           [<ffffffff810fe65f>] sys_write+0x45/0x69
           [<ffffffff8138cdf9>] system_call_fastpath+0x16/0x1b

    other info that might help us debug this:

    Chain exists of:
      SRQ-uobj --> PD-uobj --> CQ-uobj

     Possible unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(CQ-uobj);
                                   lock(PD-uobj);
                                   lock(CQ-uobj);
      lock(SRQ-uobj);

     *** DEADLOCK ***

    3 locks held by ibv_srq_pingpon/2484:
     #0:  (QP-uobj){+.+...}, at: [<ffffffffa00b162c>] ib_uverbs_create_qp+0xe9/0x684 [ib_uverbs]
     #1:  (PD-uobj){++++++}, at: [<ffffffffa00af51b>] idr_read_uobj+0x2f/0x4d [ib_uverbs]
     #2:  (CQ-uobj){+++++.}, at: [<ffffffffa00af51b>] idr_read_uobj+0x2f/0x4d [ib_uverbs]

    stack backtrace:
    Pid: 2484, comm: ibv_srq_pingpon Not tainted 3.4.0-rc5+ #34
    Call Trace:
     [<ffffffff8137eff0>] print_circular_bug+0x1f8/0x209
     [<ffffffff81070898>] __lock_acquire+0xa29/0xd06
     [<ffffffffa00af37c>] ? __idr_get_uobj+0x20/0x5e [ib_uverbs]
     [<ffffffffa00af51b>] ? idr_read_uobj+0x2f/0x4d [ib_uverbs]
     [<ffffffff81070fd0>] lock_acquire+0xbf/0xfe
     [<ffffffffa00af51b>] ? idr_read_uobj+0x2f/0x4d [ib_uverbs]
     [<ffffffff81070eee>] ? lock_release+0x166/0x189
     [<ffffffff81384f28>] down_read+0x34/0x43
     [<ffffffffa00af51b>] ? idr_read_uobj+0x2f/0x4d [ib_uverbs]
     [<ffffffffa00af51b>] idr_read_uobj+0x2f/0x4d [ib_uverbs]
     [<ffffffffa00af542>] idr_read_obj+0x9/0x19 [ib_uverbs]
     [<ffffffffa00b1728>] ib_uverbs_create_qp+0x1e5/0x684 [ib_uverbs]
     [<ffffffff81070fec>] ? lock_acquire+0xdb/0xfe
     [<ffffffff81070c09>] ? lock_release_non_nested+0x94/0x213
     [<ffffffff810d470f>] ? might_fault+0x40/0x90
     [<ffffffff810d470f>] ? might_fault+0x40/0x90
     [<ffffffffa00ae3dd>] ib_uverbs_write+0xb7/0xc2 [ib_uverbs]
     [<ffffffff810fe47f>] vfs_write+0xa7/0xee
     [<ffffffff810ff736>] ? fget_light+0x3b/0x99
     [<ffffffff810fe65f>] sys_write+0x45/0x69
     [<ffffffff8138cdf9>] system_call_fastpath+0x16/0x1b

Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:34 -07:00
Roland Dreier 3bea57a5fc IB/uverbs: Make lockdep output more readable
Add names for our lockdep classes, so instead of having to decipher
lockdep output with mysterious names:

    Chain exists of:
      key#14 --> key#11 --> key#13

lockdep will give us something nicer:

    Chain exists of:
      SRQ-uobj --> PD-uobj --> CQ-uobj

Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:17:34 -07:00