Commit Graph

15 Commits

Author SHA1 Message Date
Uwe Kleine-König f4bf03d8b7 ARM: imx: remove #includes already available from devices-common.h
Most machine files include "devices-imxXX.h" which in turn includes
<mach/devices-common.h>.  The latter already includes many headers
that the machine files don't need to include again.

These were found by:

 $ grep \#include arch/arm/plat-mxc/include/mach/devices-common.h > tmpfile
 $ git grep -l 'devices-imx' arch/arm | xargs grep -f tmpfile -F

(but I kept linux/init.h, linux/kernel.h and linux/platform_device.h)

LAKML-Reference: 1298912674-15153-2-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:08 +02:00
Fabio Estevam 350ac9ddce ARM: mx5/mx53_evk: Make the reset pin name more meaningful
As there is a mx53_smd board in the kernel, using SMD_FEC_PHY_RST as the pin name can be misleading when used
on a MX53_EVK board.

Change the pin name to reflect the board name.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23 15:07:49 +01:00
Fabio Estevam 6ea6392cc4 ARM: mx5/mx53_evk: Use gpio_request_one in mx53_evk_fec_reset
Current code inside mx53_evk_fec_reset uses gpio_direction_output with initial value of the GPIO and also sets
the GPIO value via gpio_set_value right after. This is not needed.

By using gpio_request_one it is possible to set the direction and initial value in one shot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23 15:07:48 +01:00
Fabio Estevam 54c4bd658e ARM: mx5/mx53_evk: Fix IOMUX for UART3
On mx53_evk board only RX/TX pins are used on UART3.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07 19:29:35 +01:00
Fabio Estevam daa7954ccd ARM: mach-mx5: Add watchdog support for MX53 based boards
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18 10:57:57 +01:00
Uwe Kleine-König ab13042126 ARM: mx5: use .init_early to initialize cpu type, reset address and iomuxer
This used to be done in .map_io which is supposed to only setup the
memory mapping.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10 14:23:49 +01:00
Fabio Estevam df42c8a720 ARM: mx5/board-mx53_evk.c: Make UART1 functional
Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01 10:26:12 +01:00
Dinh Nguyen 816ad741b6 ARM: i.MX53: Add full iomux support for mx53
This iomux file contains all the available pins that are iomux
capable.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-21 11:32:45 +01:00
Yong Shen 65e2e9c8c3 ARM: i.MX53 EVK: add spi nor device
add spi board information for spi nor device

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 10:02:18 +01:00
Yong Shen 6b2837dc6d ARM: i.MX53 EVK: add ecspi IOMUX setting
add ecspi IOMUX setting, also fix a bug of chip select pin order

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 10:02:18 +01:00
Yong Shen b0a6ba5ffb ARM i.MX53 enable spi on EVK board
1. some macro definitions fix
2. add platform data for spi device
3. register spi clocks

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11 10:07:14 +01:00
Yong Shen 410d3458e5 ARM i.MX53 enable sdhc support on EVK board
1. changes some register address to fit macro definition
2. add platform data and clock for sdhc

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07 15:20:53 +01:00
Yong Shen 0d7671ee66 ARM i.MX53 enable i2c on EVK board
add i2c platform data and clock

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07 15:20:53 +01:00
Yong Shen 639047677b ARM i.MX53: enable fec driver on EVK board
1. Adjust FEC base address name to fit macro definition
2. Add platform data and reset function for FEC

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07 15:20:53 +01:00
Yong Shen a58154d1c3 ARM i.MX53: Make MX53 EVK bootable
1. Add entries to Kconfig
2. Add machine definition
3. Add Uart platform data, pad setting and base address
4. Adjust GPIO irq number

Signed-off-by: Yong Shen <yong.shen@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-04 12:00:23 +01:00