Add new compatible strings and match data to support sc2730 and sc2721
which are two varieties of SC27XX family.
Signed-off-by: Nemo Han <nemo.han@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20201117034949.47877-2-zhang.lyra@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We need to make sure we are not stomping on the control URB that was
issued when opening the device when attempting to toggle buzzer.
To do that we need to mark it as pending in cm109_open().
Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with
multiple mode and integrated waveform memory and wideband support.
It communicates via an I2C bus to the device.
Signed-off-by: Roy Im <roy.im.opensource@diasemi.com>
Reviewed-by: Jes Sorensen <Jes.Sorensen@gmail.com>.
Link: https://lore.kernel.org/r/1e293e8c4830b09255af3b7e1721b73afaefdfa3.1606320459.git.Roy.Im@diasemi.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This adds support for the power button attached to the Embedded Controller
on a Dell Wyse 3020 "Ariel" board.
The Embedded Controller's SPI interface is actually capable sending and
receiving the PS/2 keyboard and mouse protocol data, which looks like
a good fit for a serio driver. Howerver, I don't know of any machines where
this is actually used.
My board only has a single power button and no way to connect an actual
keyboard or a mouse. Using the atkbd driver with serio would be an overkill
and would be inconvenient for the userspace. Therefore this driver
registers an input device that is only capable of reporting the power
button presses and releases.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20201201083533.1724287-3-lkundrak@v3.sk
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add the Lenovo Yoga Tablet2 1051L to the list of devices where the
ACPI AML code is poking the GPIO config register directly changing
the IRQ type to a low_level_irq, which we need to work around.
This fixes the home button on the Lenovo Yoga Tablet2 1051L not
working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201206161245.24798-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This fixes the following build errors:
CC [M] drivers/input/misc/soc_button_array.o
drivers/input/misc/soc_button_array.c:156:4: error: implicit declaration of function 'irq_set_irq_type' [-Werror,-Wimplicit-function-declaration]
irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
^
drivers/input/misc/soc_button_array.c:156:26: error: use of undeclared identifier 'IRQ_TYPE_LEVEL_LOW'
irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
^
2 errors generated.
Fixes: 78a5b53e9f ("Input: soc_button_array - work around DSDTs which modify the irqflags")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201123061508.GA1009828@dtor-ws
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/misc/wm831x-on.c:30: warning: cannot understand function prototype: 'struct wm831x_on '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201112110204.2083435-10-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/misc/ab8500-ponkey.c:32: warning: Function parameter or member 'idev' not described in 'ab8500_ponkey'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-5-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'input_dev' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'client' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'regmap' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'work' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'regulator' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'page' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'magnitude' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'frequency' not described in 'drv2667_data'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-19-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'input_dev' not described in 'drv2665_data'
drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'client' not described in 'drv2665_data'
drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'regmap' not described in 'drv2665_data'
drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'work' not described in 'drv2665_data'
drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'regulator' not described in 'drv2665_data'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-18-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'input_dev' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'client' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regmap' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'work' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'enable_gpio' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regulator' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'magnitude' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'mode' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'library' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'rated_voltage' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'overdrive_voltage' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:244: warning: Function parameter or member 'voltage' not described in 'drv260x_calculate_voltage'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-17-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The "revid" is used to store negative error codes so it should be an int
type.
Fixes: e27c729219 ("Input: add driver for ADXL345/346 Digital Accelerometers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20201026072824.GA1620546@mwanda
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some 2-in-1s which use the soc_button_array driver have this ugly issue in
their DSDT where the _LID method modifies the irq-type settings of the
GPIOs used for the power and home buttons. The intend of this AML code is
to disable these buttons when the lid is closed.
The AML does this by directly poking the GPIO controllers registers. This
is problematic because when re-enabling the irq, which happens whenever
_LID gets called with the lid open (e.g. on boot and on resume), it sets
the irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs
the type to, and expects it to be, IRQ_TYPE_EDGE_BOTH.
This commit adds a workaround for this which (on affected devices) does
not set gpio_keys_button.gpio on these 2-in-1s, instead it gets the irq for
the GPIO, configures it as IRQ_TYPE_LEVEL_LOW (to match how the _LID AML
code configures it) and passes the irq in gpio_keys_button.irq.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200906122016.4628-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
According to the Microsoft documentation for Windows 8 convertible
devices, these devices should implement a PNP0C60 "laptop/slate mode state
indicator" ACPI device.
This device can work in 2 ways, if there is a GPIO which directly
indicates the device is in tablet-mode or not then the direct-gpio mode
should be used. If there is no such GPIO, but instead the events are
coming from e.g. the embedded-controller, then there should still be
a PNP0C60 ACPI device and event-injection should be used to send the
events. The drivers/platform/x86/intel-vbtn.c code is an example from
a standardized manner of doing the latter.
On various 2-in-1s with either a detachable keyboard, or with 360°
hinges, the direct GPIO mode is indicated by an ACPI device with a
HID of INT33D3, which contains a single GpioInt in its ACPI resource
table, which directly indicates if the device is in tablet-mode or not.
This commit adds support for this to the soc_button_array code, as
well as for the alternative ID9001 HID which some devices use
instead of the INT33D3 HID.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200826150601.12137-3-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is a preparation patch for adding support for Intel INT33D3
ACPI devices. These INT33D3 devices follow yet another Intel defined
(but not documented) ACPI GPIO button standard.
Unlike the ACPI GPIO button devices supported so far, the GPIO used in
the INT33D3 devices is active-high, rather then active-low.
This commit makes setting the gpio_keys_button.active_low flag
configurable through the soc_button_info struct and enables it for all
currently supported devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200826150601.12137-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently the assignment of -ENOMEM to error is redundant because error
is not being read and -ENOMEM is being hard coded as an error return.
Fix this by returning the error code in variable 'error'; this also
allows the error code from a failed call to input_register_device to
be preserved and returned to the caller rather than just returning
a possibly inappropriate -ENOMEM.
Kudos to Dan Carpenter for the suggestion of an improved fix.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200603152151.139337-1-colin.king@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When I cat some module parameters by sysfs, it displays as follows. It's
better to add a newline for easy reading.
root@syzkaller:~# cat /sys/module/ati_remote2/parameters/mode_mask
0x1froot@syzkaller:~# cat /sys/module/ati_remote2/parameters/channel_mask
0xffffroot@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20200720092148.9320-1-wangxiongfeng2@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If CONFIG_INPUT_IQS269A is selected yet CONFIG_I2C is not, the build
fails. To solve this problem, add I2C as a dependency.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 04e49867fa ("Input: add support for Azoteq IQS269A")
Link: https://lore.kernel.org/r/1589809466-22748-1-git-send-email-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The address referenced by this driver is within the Qualcomm Clock
namespace so let's drop the msm-vibrator bindings so that a more generic
solution can be used instead. No one is currently using driver so this
won't affect any users.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20200513013140.69935-3-masneyb@onstation.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
input_mt_report_slot_state() ignores "tool" argument when the slot is
closed, which has caused a bit of confusion. Let's introduce
input_mt_report_slot_inactive() to report inactive slot state.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Link: https://lore.kernel.org/r/20200508055656.96389-2-jiada_wang@mentor.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6BIG4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGlHUH/RCFve2sfHRPjRW+
xR5SaLVAw6XKvtKBq7yvKmHEwqNJnL79IHyqqtSrtfFr2FfaH/KvYiCbbAezvSrM
np0udGu7STKGd21CWuyEZJudyhXkOwMRNiFiCXWp7rs35oh8T0TpJxMzo2Nc1nLk
JFQPqAP6OSvq4IkWEywKQI+Au3Z1IBf83xVjZ1s+MKPQHYD49x2hc4cQntL5/cnm
a3DoR2iBkYiGZCZ9dDqAqJTnMQIiCbACdZXgGjNRUpdyA/dtAjsMl11NPYHm8TA2
3AHBupAK50WBZGad6xv2qKQyScsmoJG2mv92QjlOFz0Tpiu6rLnDlLYREDVB6YH6
qbLDsc8=
=XEIU
-----END PGP SIGNATURE-----
Merge tag 'v5.6' into next
Sync up with mainline to get device tree and other changes.
On some X86 devices we do not register an input-device, because the
power-button is also handled by the soc_button_array (GPIO) input driver,
and we want to avoid reporting power-button presses to userspace twice.
Sofar when we did this we also did not register our interrupt handlers,
since those were only necessary to report input events.
But on at least 2 device models the Medion Akoya E1239T and the GPD win,
the GPIO pin used by the soc_button_array driver for the power-button
cannot wakeup the system from suspend. Why this does not work is not clear,
I've tried comparing the value of all relevant registers on the Cherry
Trail SoC, with those from models where this does work. I've checked:
PMC registers: FUNC_DIS, FUNC_DIS2, SOIX_WAKE_EN, D3_STS_0, D3_STS_1,
D3_STDBY_STS_0, D3_STDBY_STS_1; PMC ACPI I/O regs: PM1_STS_EN, GPE0a_EN
and they all have identical contents in the working and non working cases.
I suspect that the firmware either sets some unknown register to a value
causing this, or that it turns off a power-plane which is necessary for
GPIO wakeups to work during suspend.
What does work on the Medion Akoya E1239T is letting the AXP288 wakeup
the system on a power-button press (the GPD win has a different PMIC).
Move the registering of the power-button press/release interrupt-handler
from axp20x_pek_probe_input_device() to axp20x_pek_probe() so that the
PMIC will wakeup the system on a power-button press, even if we do not
register an input device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200426155757.297087-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is now an IIO driver for GP2AP002A00F and GP2AP002S00F in
drivers/iio/light/gp2ap002.c.
Delete this driver, it is unused in the kernel tree and new users can make
use of the IIO driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200417203059.8151-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are many devices, including several mobile battery-powered
devices, using other AXP variants as their PMIC. Allow them to use
the power key as a wakeup source.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200115051253.32603-3-samuel@sholland.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Unlike most other power button drivers, this driver unconditionally
enables its wakeup IRQ. It should be using device_may_wakeup() to
respect the userspace configuration of wakeup sources.
Because the AXP20x MFD device uses regmap-irq, the AXP20x PEK IRQs are
nested off of regmap-irq's threaded interrupt handler. The device core
ignores such interrupts, so to actually disable wakeup, we must
explicitly disable all non-wakeup interrupts during suspend.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115051253.32603-2-samuel@sholland.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Setting the vibrator enable_mask is not implemented correctly:
For regmap_update_bits(map, reg, mask, val) we give in either
regs->enable_mask or 0 (= no-op) as mask and "val" as value.
But "val" actually refers to the vibrator voltage control register,
which has nothing to do with the enable_mask.
So we usually end up doing nothing when we really wanted
to enable the vibrator.
We want to set or clear the enable_mask (to enable/disable the vibrator).
Therefore, change the call to always modify the enable_mask
and set the bits only if we want to enable the vibrator.
Fixes: d4c7c5c96c ("Input: pm8xxx-vib - handle separate enable register")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200114183442.45720-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on probe
due to a malfunctioning (or malicious) device until the device is
physically disconnected. While sleeping in probe the driver prevents
other devices connected to the same hub from being added to (or removed
from) the bus.
The USB upper limit of five seconds per request should be more than
enough.
Fixes: 99f83c9c9a ("[PATCH] USB: add driver for Keyspan Digital Remote")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org> # 2.6.13
Link: https://lore.kernel.org/r/20200113171715.30621-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We need the of_match table if we want to use the compatible string in
the pmic's child node and get the onkey driver loaded automatically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The two device attrbitues are not declared outside this file
so make them static to avoid the following warnings:
drivers/input/misc/axp20x-pek.c:194:1: warning: symbol 'dev_attr_startup' was not declared. Should it be static?
drivers/input/misc/axp20x-pek.c:195:1: warning: symbol 'dev_attr_shutdown' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20191217152541.2167080-1-ben.dooks@codethink.co.uk
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Going through all uses of timeval, I noticed that we screwed up
input_event in the previous attempts to fix it:
The time fields now match between kernel and user space, but all following
fields are in the wrong place.
Add the required padding that is implied by the glibc timeval definition
to fix the layout, and use a struct initializer to avoid leaking kernel
stack data.
Fixes: 141e5dcaa7 ("Input: input_event - fix the CONFIG_SPARC64 mixup")
Fixes: 2e746942eb ("Input: input_event - provide override for sparc64")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191213204936.3643476-2-arnd@arndb.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
uinput device is always available for writing so we should always report
EPOLLOUT and EPOLLWRNORM bits, not only when there is nothing to read from
the device.
Fixes: d4b675e1b5 ("Input: uinput - fix returning EPOLLOUT from uinput_poll")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20191209202254.GA107567@dtor-ws
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts kxtj9 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.
note that with regular input devices handling polling, there is no longer a
benefit in having separate INPUT_KXTJ9_POLLED_MODE config option.
Link: https://lore.kernel.org/r/20191017204217.106453-23-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts bma150 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-21-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver can be cleaned up by using managed resource helpers.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
[dtor: do not explicitly set parent of input device since we are using devm]
Link: https://lore.kernel.org/r/20191017204217.106453-20-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts mma8450 driver to use the polling
mode of standard input devices and removes dependency on INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-19-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts gpio_decoder driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-18-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts rb532_button driver to use
the polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.
Link: https://lore.kernel.org/r/20191017204217.106453-17-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov