An sdt probe can be associated with arguments but they were not passed
to the user probe tracing interface (uprobe_events); this patch adapts
the sdt argument descriptors according to the uprobe input format.
As the uprobe parser does not support scaled address mode, perf will
skip arguments which cannot be adapted to the uprobe format.
Here are the results:
$ perf buildid-cache -v --add test_sdt
$ perf probe -x test_sdt sdt_libfoo:table_frob
$ perf probe -x test_sdt sdt_libfoo:table_diddle
$ perf record -e sdt_libfoo:table_frob -e sdt_libfoo:table_diddle test_sdt
$ perf script
test_sdt ... 666.255678: sdt_libfoo:table_frob: (4004d7) arg0=0 arg1=0
test_sdt ... 666.255683: sdt_libfoo:table_diddle: (40051a) arg0=0 arg1=0
test_sdt ... 666.255686: sdt_libfoo:table_frob: (4004d7) arg0=1 arg1=2
test_sdt ... 666.255689: sdt_libfoo:table_diddle: (40051a) arg0=3 arg1=4
test_sdt ... 666.255692: sdt_libfoo:table_frob: (4004d7) arg0=2 arg1=4
test_sdt ... 666.255694: sdt_libfoo:table_diddle: (40051a) arg0=6 arg1=8
Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20161214000732.1710-3-alexis.berlemont@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During a "perf buildid-cache --add" command, the section ".note.stapsdt"
of the "added" binary is scanned in order to list the available SDT
markers available in a binary. The parts containing the probes arguments
were left unscanned.
The whole section is now parsed; the probe arguments are extracted for
later use.
Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20161214000732.1710-2-alexis.berlemont@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On old perf, when using 'perf probe -d' to delete an inexistent event,
it returns errno, eg,
-bash-4.3# perf probe -d xxx || echo $?
Info: Event "*:xxx" does not exist.
Error: Failed to delete events.
255
But now perf_del_probe_events() will always set ret = 0, different from
previous del_perf_probe_events(). After this, it returns errno again,
eg,
-bash-4.3# ./perf probe -d xxx || echo $?
"xxx" does not hit any event.
Error: Failed to delete events.
254
And it is more appropriate to return -ENOENT instead of -EPERM.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: dddc7ee32f ("perf probe: Fix an error when deleting probes successfully")
Link: http://lkml.kernel.org/r/1489738592-61011-1-git-send-email-wangkefeng.wang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are many SDT markers in powerpc whose uprobe definition goes
beyond current MAX_CMDLEN, especially when target filename is long and
sdt marker has long list of arguments. For example, definition of sdt
marker
method__compile__end: 8@17 8@9 8@10 -4@8 8@7 -4@6 8@5 -4@4 1@37(28)
from file
/usr/lib/jvm/java-1.8.0-openjdk-1.8.0.91-2.b14.fc22.ppc64/jre/lib/ppc64/server/libjvm.so
is
p:sdt_hotspot/method__compile__end /usr/lib/jvm/java-1.8.0-openjdk-\
1.8.0.91-2.b14.fc22.ppc64/jre/lib/ppc64/server/libjvm.so:0x4c4e00\
arg1=%gpr17:u64 arg2=%gpr9:u64 arg3=%gpr10:u64 arg4=%gpr8:s32\
arg5=%gpr7:u64 arg6=%gpr6:s32 arg7=%gpr5:u64 arg8=%gpr4:s32\
arg9=+37(%gpr28):u8
'perf probe' fails with segfault for such markers. As the uprobe_events
file accepts definitions up to 4094 characters(4096 - 2 (\n\0)),
increase value of MAX_CMDLEN match that.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170207054547.3690-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes:
- Fix concat_probe_trace_events() in 'perf probe', it should dereference a
pointer, not test its value (Ravi Bangoria)
User visible:
- Handle partial AUX records, checking if 'kvm_intel.ko' is loaded and
if its 'vmm_exclusive' parameter is set to 0, suggesting tweaking
it to reduce gaps (Alexander Shishkin)
Infrastructure:
- Sync the kvm.h, cpufeatures.h and perf_event.h tools/ headers copies
with the kernel (Arnaldo Carvalho de Melo, Alexander Shishkin)
- 'perf lock' subcommands should include common options, using
OPT_PARENT() (Changbin Du)
- Ditto for 'perf timechart' (Arnaldo Carvalho de Melo)
Documentation:
Correct 'perf stat --no-aggr' description (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=DmuJ
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.12-20170320' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Fixes:
- Fix concat_probe_trace_events() in 'perf probe', it should dereference a
pointer, not test its value (Ravi Bangoria)
User visible changes:
- Handle partial AUX records, checking if 'kvm_intel.ko' is loaded and
if its 'vmm_exclusive' parameter is set to 0, suggesting tweaking
it to reduce gaps (Alexander Shishkin)
Infrastructure changes:
- Sync the kvm.h, cpufeatures.h and perf_event.h tools/ headers copies
with the kernel (Arnaldo Carvalho de Melo, Alexander Shishkin)
- 'perf lock' subcommands should include common options, using
OPT_PARENT() (Changbin Du)
- Ditto for 'perf timechart' (Arnaldo Carvalho de Melo)
Documentation changes:
Correct 'perf stat --no-aggr' description (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The changes in the following csets are not relevant for what is used in
tools/perf/arch/powerpc/util/kvm-stat.c, but lets sync it to silence the
diff detector in the tools build system:
c927013227 ("KVM: PPC: Book3S HV: Add userspace interfaces for POWER9 MMU")
17d48610ae ("KVM: PPC: Book 3S: XICS: Implement ICS P/Q states")
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'*ntevs' contains number of elements present in 'tevs' array. If there
are no elements in array, 'tevs2' can be directly assigned to 'tevs'
without allocating more space. So the condition should be '*ntevs == 0'
not 'ntevs == 0'.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 42bba263eb ("perf probe: Allow wildcard for cached events")
Link: http://lkml.kernel.org/r/20170308065908.4128-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Description of --no-aggr in perf-stat man page is outdated. --no-aggr
can also be used while profiling specific set of cpus. For ex,
$ perf stat -e cycles,instructions -C 1-2 --no-aggr -- sleep 1
Performance counter stats for 'CPU(s) 1-2':
CPU1 5,94,92,795 cycles
CPU2 2,69,72,403 cycles
CPU1 2,02,08,327 instructions # 0.34 insn per cycle
CPU2 73,17,123 instructions # 0.12 insn per cycle
1.000989132 seconds time elapsed
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1490013438-5713-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The changes in the following csets are not relevant for 'perf kvm' usage
but lets sync it to silence the diff detector in the tools build system:
e96a006cb0 ("KVM: arm/arm64: vgic: Implement KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO ioctl")
d017d7b0bd ("KVM: arm/arm64: vgic: Implement VGICv3 CPU interface access")
94574c9488 ("KVM: arm/arm64: vgic: Add distributor and redistributor access")
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use those in tools/arch/x86/lib/mem{cpy,set}_64.S, in turn used
in the 'perf bench mem' benchmarks.
The changes in the following csets are not relevant for this usecase,
but lets sync it to silence the diff detector in the tools build system:
6fb895692a ("x86/cpufeature: Add 5-level paging detection")
Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch decodes the 'partial' flag in AUX records and prints
a warning to the user, so that they don't have to guess why their
PT traces contain gaps (or missing altogether):
Warning:
AUX data had gaps in it 8 times out of 8!
Are you running a KVM guest in the background?
Trying to be even more helpful, we will detect if the user's kvm driver sets up
exclusive VMX root mode for the entire lifespan of the kvm process:
Reloading kvm_intel module with vmm_exclusive=0
will reduce the gaps to only guest's timeslices.
Note however, that you'll still have gaps in cpu-wide traces even with
vmm_exclusive=0, but the number of gaps will be below 100% (as opposed to the
above example).
Currently this is the only reason for partial records.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get PERF_AUX_FLAG_PARTIAL, introduced in:
ae0c2d995d ("perf/core: Add a flag for partial AUX records")
and that will be used to warn the user about gaps in AUX records due
to VMX being used in KVM guests.
Silences the kernel/tools file copy detector:
Warning: include/uapi/linux/perf_event.h differs from kernel
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used in a upcoming patch warning about PERF_RECORD_AUX data
gaps, reading the "module/kvm_intel/parameters/vmm_exclusive" sysfs
entry.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move -T/--tasks-only and -P/--power-only options to a separate options
array that then gets referenced via OPT_PARENT from the 'perf timechart'
and 'perf timechart record' option arrays.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j80lol9wj1i6556ibh48iebe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All options need the -f/--force option, so move it to the array
referenced via OPT_PARENT.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-unbeionpi58rioh4e9w8kp4n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When I use -i option for report subcommand, it doesn't accept it. We
need add common options using OPT_PARENT macro.
perf lock report -i lock_perf.data
Error: unknown switch `i'
Usage: perf lock report [<options>]
-f, --force don't complain, do it
-k, --key <acquired> key for sorting ...
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170317055342.8284-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features:
- Add 'brstackinsn' field in 'perf script' to reuse the x86 instruction
decoder used in the Intel PT code to study hot paths to samples (Andi Kleen)
Kernel:
- Default UPROBES_EVENTS to Y (Alexei Starovoitov)
- Fix check for kretprobe offset within function entry (Naveen N. Rao)
Infrastructure:
- Introduce util func is_sdt_event() (Ravi Bangoria)
- Make perf_event__synthesize_mmap_events() scale on older kernels where
reading /proc/pid/maps is way slower than reading /proc/pid/task/pid/maps (Stephane Eranian)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJYyrdSAAoJENZQFvNTUqpAe+4P/3c4ilBSOxLCCxGO7jDYo9oq
/KqlvsCIg7+vo5eqrOUJAb4qXFnvpYxwjMMkL5rx7gdsBCRfRXIINGWUMrq5mNyk
MgxuqYnp+yRuxLYml2wn+tdwLzcHWSN2EO9mqQ14N4I+HvgdLmVPQ44ACQXs6KfL
dk/Ix8YtnFWl2sDZjvyr7ZBqwCPzzklZgHM6erxNUr/WJspzUiixAWqUmewodOUl
P3PitlHXkITOK3AxSqOjJ4g1k933215nGih7hr0XdjEm4pIYaYksShQ6k9DASCrv
dn2o1pF1LTu7KCtAo70aaSB7GXydwoA//o2gRbDkSwJJ25DIImZxJXQz9PAYDOo1
vXSIhmlQ72c4/Yv/XzVOrIoMMMpmWKS3lGZxMVGR/Ie9Gw4kbotkaoEqEpNQsaDZ
iIaU5v/EcvvToT7T7VHrGg0+vmHgYxm5gSlyASi2IrO2/wJAs0v2pYfuL6gYhXGp
mhv/pHUv4l9OW+Ubm+zJEEcg337c2RQU5wT/bk4PihxY6nQyEH2Pn5VzdNbZLuMR
eWnqTH/md+8/bkhmuZJp71wm60oPHoPvbDjvtfVmXAa52AzO+NWSc9Veke3C/QRm
XgNkrXlzeKopEso3j4gw2iAolqw9t8FHFLGgbTkS+6UCKjAM7vNLiIV02LQqhM50
qCnKEusMDCRgzeOXxYt+
=Bg5M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.12-20170316' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Add 'brstackinsn' field in 'perf script' to reuse the x86 instruction
decoder used in the Intel PT code to study hot paths to samples (Andi Kleen)
Kernel changes:
- Default UPROBES_EVENTS to Y (Alexei Starovoitov)
- Fix check for kretprobe offset within function entry (Naveen N. Rao)
Infrastructure changes:
- Introduce util func is_sdt_event() (Ravi Bangoria)
- Make perf_event__synthesize_mmap_events() scale on older kernels where
reading /proc/pid/maps is way slower than reading /proc/pid/task/pid/maps (Stephane Eranian)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As it is already turned on by most distros, so just flip the default to
Y.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: David Miller <davem@davemloft.net>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170316005817.GA6805@ast-mbp.thefacebook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement printing instruction sequences as hex dump for branch stacks.
This relies on the x86 instruction decoder used by the PT decoder to
find the lengths of instructions to dump them individually.
This is good enough for pattern matching.
This allows to study hot paths for individual samples, together with
branch misprediction and cycle count / IPC information if available (on
Skylake systems).
% perf record -b ...
% perf script -F brstackinsn
...
read_hpet+67:
ffffffff9905b843 insn: 74 ea # PRED
ffffffff9905b82f insn: 85 c9
ffffffff9905b831 insn: 74 12
ffffffff9905b833 insn: f3 90
ffffffff9905b835 insn: 48 8b 0f
ffffffff9905b838 insn: 48 89 ca
ffffffff9905b83b insn: 48 c1 ea 20
ffffffff9905b83f insn: 39 f2
ffffffff9905b841 insn: 89 d0
ffffffff9905b843 insn: 74 ea # PRED
Only works when no special branch filters are specified.
Occasionally the path does not reach up to the sample IP, as the LBRs
may be frozen before executing a final jump. In this case we print a
special message.
The instruction dumper piggy backs on the existing infrastructure from
the IP PT decoder.
An earlier iteration of this patch relied on a disassembler, but this
version only uses the existing instruction decoder.
Committer note:
Added hint about how to get suitable perf.data files for use with
'-F brstackinsm':
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (8 samples) ]
$
$ perf script -F brstackinsn
Display of branch stack assembler requested, but non all-branch filter set
Hint: run 'perf record -b ...'
$
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20170223234634.583-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use those in tools/arch/x86/lib/mem{cpy,set}_64.S, in turn used
in the 'perf bench mem' benchmarks.
The changes in the following csets are not relevant for this usecase,
but lets sync it to silence the diff detector in the tools build system:
78d1b29684 ("x86/cpu: Add X86_FEATURE_CPUID")
3bba73b1b7 ("x86/cpufeature: Move RING3MWAIT feature to avoid conflicts")
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-nsqxpyzcv4ywesikhhhrgfgc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit:
1c5ac21a0e ("perf/x86/intel/pt: Don't die on VMXON")
... PT events depend on re-scheduling to get enabled after a VMX session
has taken place. This is, in particular, a problem for CPU context events,
which don't normally get re-scheduled, unless there is a reason.
This patch changes the VMX handling so that PT event gets re-enabled
when VMX root mode exits.
Also, notify the user when there's a gap in PT data due to VMX root
mode by flagging AUX records as partial.
In combination with vmm_exclusive=0 parameter of the kvm_intel driver,
this will result in trace gaps only for the duration of the guest's
timeslices.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170220133352.17995-5-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Intel PT driver needs to be able to communicate partial AUX transactions,
that is, transactions with gaps in data for reasons other than no room
left in the buffer (i.e. truncated transactions). Therefore, this condition
does not imply a wakeup for the consumer.
To this end, add a new "partial" AUX flag.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170220133352.17995-4-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for adding more flags to perf AUX records, introduce a
separate API for setting the flags for a session, rather than appending
more bool arguments to perf_aux_output_end. This allows to set each
flag at the time a corresponding condition is detected, instead of
tracking it in each driver's private state.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170220133352.17995-3-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Goldmont supports full Top Down level 1 metrics (FrontendBound,
Retiring, Backend Bound and Bad Speculation).
It has 3 wide pipeline.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1486711438-80058-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull block fixes from Jens Axboe:
"Four small fixes for this cycle:
- followup fix from Neil for a fix that went in before -rc2, ensuring
that we always see the full per-task bio_list.
- fix for blk-mq-sched from me that ensures that we retain similar
direct-to-issue behavior on running the queue.
- fix from Sagi fixing a potential NULL pointer dereference in blk-mq
on spurious CPU unplug.
- a memory leak fix in writeback from Tahsin, fixing a case where
device removal of a mounted device can leak a struct
wb_writeback_work"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq-sched: don't run the queue async from blk_mq_try_issue_directly()
writeback: fix memory leak in wb_queue_work()
blk-mq: Fix tagset reinit in the presence of cpu hot-unplug
blk: Ensure users for current->bio_list can see the full list.
This patch significantly improves the execution time of
perf_event__synthesize_mmap_events() when running perf record on systems
where processes have lots of threads.
It just happens that cat /proc/pid/maps support uses a O(N^2) algorithm to
generate each map line in the maps file. If you have 1000 threads, then you
have necessarily 1000 stacks. For each vma, you need to check if it
corresponds to a thread's stack. With a large number of threads, this can take
a very long time. I have seen latencies >> 10mn.
As of today, perf does not use the fact that a mapping is a stack, therefore we
can work around the issue by using /proc/pid/tasks/pid/maps. This entry does
not try to map a vma to stack and is thus much faster with no loss of
functonality.
The proc-map-timeout logic is kept in case users still want some upper limit.
In V2, we fix the file path from /proc/pid/tasks/pid/maps to actual
/proc/pid/task/pid/maps, tasks -> task. Thanks Arnaldo for catching this.
Committer note:
This problem seems to have been elliminated in the kernel since commit :
b18cb64ead ("fs/proc: Stop trying to report thread stacks").
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170315135059.GC2177@redhat.com
Link: http://lkml.kernel.org/r/1489598233-25586-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf specifies an offset from _text and since this offset is fed
directly into the arch-specific helper, kprobes tracer rejects
installation of kretprobes through perf. Fix this by looking up the
actual offset from a function for the specified sym+offset.
Refactor and reuse existing routines to limit code duplication -- we
repurpose kprobe_addr() for determining final kprobe address and we
split out the function entry offset determination into a separate
generic helper.
Before patch:
naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return
probe-definition(0): do_open%return
symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /boot/vmlinux for symbols
Open Debuginfo file: /boot/vmlinux
Try to find probe point from debuginfo.
Matched function: do_open [2d0c7ff]
Probe point found: do_open+0
Matched function: do_open [35d76dc]
found inline addr: 0xc0000000004ba9c4
Failed to find "do_open%return",
because do_open is an inlined function and has no return point.
An error occurred in debuginfo analysis (-22).
Trying to use symbols.
Opening /sys/kernel/debug/tracing//README write=0
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: r:probe/do_open _text+4469776
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
naveen@ubuntu:~/linux/tools/perf$ dmesg | tail
<snip>
[ 33.568656] Given offset is not valid for return probe.
After patch:
naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return
probe-definition(0): do_open%return
symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /boot/vmlinux for symbols
Open Debuginfo file: /boot/vmlinux
Try to find probe point from debuginfo.
Matched function: do_open [2d0c7d6]
Probe point found: do_open+0
Matched function: do_open [35d76b3]
found inline addr: 0xc0000000004ba9e4
Failed to find "do_open%return",
because do_open is an inlined function and has no return point.
An error occurred in debuginfo analysis (-22).
Trying to use symbols.
Opening /sys/kernel/debug/tracing//README write=0
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: r:probe/do_open _text+4469808
Writing event: r:probe/do_open_1 _text+4956344
Added new events:
probe:do_open (on do_open%return)
probe:do_open_1 (on do_open%return)
You can now use it in all perf tools, such as:
perf record -e probe:do_open_1 -aR sleep 1
naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list
c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED]
c0000000004ba0b8 r do_open+0x8 [DISABLED]
c000000000443430 r do_open+0x0 [DISABLED]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features:
- Add PERF_RECORD_NAMESPACES so that the kernel can record information
required to associate samples to namespaces, helping in container
problem characterization.
Now the 'perf record has a --namespace' option to ask for such info,
and when present, it can be used, initially, via a new sort order,
'cgroup_id', allowing histogram entry bucketization by a (device, inode)
based cgroup identifier (Hari Bathini)
- Add --next option to 'perf sched timehist', showing what is the next
thread to run (Brendan Gregg)
Fixes:
- Fix segfault with basic block 'cycles' sort dimension (Changbin Du)
- Add c2c to command-list.txt, making it appear in the 'perf help'
output (Changbin Du)
- Fix zeroing of 'abs_path' variable in the perf hists browser switch
file code (Changbin Du)
- Hide tips messages when -q/--quiet is given to 'perf report' (Namhyung Kim)
Infrastructure:
- Use ref_reloc_sym + offset to setup kretprobes (Naveen Rao)
- Ignore generated files pmu-events/{jevents,pmu-events.c} for git (Changbin Du)
Documentation:
- Document +field style argument support for --field option (Changbin Du)
- Clarify 'perf c2c --stats' help message (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=yawj
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.12-20170314' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Add PERF_RECORD_NAMESPACES so that the kernel can record information
required to associate samples to namespaces, helping in container
problem characterization.
Now the 'perf record has a --namespace' option to ask for such info,
and when present, it can be used, initially, via a new sort order,
'cgroup_id', allowing histogram entry bucketization by a (device, inode)
based cgroup identifier (Hari Bathini)
- Add --next option to 'perf sched timehist', showing what is the next
thread to run (Brendan Gregg)
Fixes:
- Fix segfault with basic block 'cycles' sort dimension (Changbin Du)
- Add c2c to command-list.txt, making it appear in the 'perf help'
output (Changbin Du)
- Fix zeroing of 'abs_path' variable in the perf hists browser switch
file code (Changbin Du)
- Hide tips messages when -q/--quiet is given to 'perf report' (Namhyung Kim)
Infrastructure changes:
- Use ref_reloc_sym + offset to setup kretprobes (Naveen Rao)
- Ignore generated files pmu-events/{jevents,pmu-events.c} for git (Changbin Du)
Documentation changes:
- Document +field style argument support for --field option (Changbin Du)
- Clarify 'perf c2c --stats' help message (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a rather large set of fixes. The bulk are for lpfc correcting
a lot of issues in the new NVME driver code which just went in in the
merge window. The others are: fix a hang in the vmware paravirt
driver caused by incorrect handling of the new MSI vector allocation.
A long standing bug in storvsc, which recent block changes turned from
being a harmless annoyance into a hang and yet more fallout (in
mpt3sas) from the changes to device blocking. The remainder are small
fixes and updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=0mha
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a rather large set of fixes. The bulk are for lpfc correcting
a lot of issues in the new NVME driver code which just went in in the
merge window.
The others are:
- fix a hang in the vmware paravirt driver caused by incorrect
handling of the new MSI vector allocation
- long standing bug in storvsc, which recent block changes turned
from being a harmless annoyance into a hang
- yet more fallout (in mpt3sas) from the changes to device blocking
The remainder are small fixes and updates"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits)
scsi: lpfc: Add shutdown method for kexec
scsi: storvsc: Workaround for virtual DVD SCSI version
scsi: lpfc: revise version number to 11.2.0.10
scsi: lpfc: code cleanups in NVME initiator discovery
scsi: lpfc: code cleanups in NVME initiator base
scsi: lpfc: correct rdp diag portnames
scsi: lpfc: remove dead sli3 nvme code
scsi: lpfc: correct double print
scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT
scsi: lpfc: Rework lpfc Kconfig for NVME options
scsi: lpfc: add transport eh_timed_out reference
scsi: lpfc: Fix eh_deadline setting for sli3 adapters.
scsi: lpfc: add NVME exchange aborts
scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport
scsi: lpfc: Fix IO submission if WQ is full
scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem
scsi: lpfc: Fix RCTL value on NVME LS request and response
scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters
scsi: lpfc: fix missing spin_unlock on sql_list_lock
scsi: lpfc: don't dereference dma_buf->iocbq before null check
...
The GFS2 developers uncovered a really nasty problem that
can lead to random corruption and kernel panic, much like
the last one. Andreas Gruenbacher wrote this simple one-line
patch to fix the problem:
28ea06c gfs2: Avoid alignment hole in struct lm_lockname
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYyUyZAAoJENeLYdPf93o7hXsH/iO1H+G11StNW9BkH33pH0bm
T9tA+AP8QewetUSz+Fyjc2OBdlc7SOYN85kvMQUOGW4omuHgAS7AhTqcT+nMffco
QpFcjfnpL6iEwiOQ0nDIbfZd6Yo476jCqKsdRBTupf3UIz3LOzXCDRrsd2YFXXYc
kYcECvujVi00kTCKiWY32XE9zB6/CXLnhXxofHf+zmvzc4WnUYdJUZsPB3x8K+D/
No6Qt8UWPwcXceIlIedjMj+PnReSo/bSTDr62yg9AXfI4ZbAJk7xrm1ZINa/z2g0
SLqRoetZo/9jQlbiBitwiHbFlwrrMEzl8Vu83ptt7EzGed6O0Xyn5I3ULbpUy9E=
=0L2A
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Bob Peterson:
"This is an emergency patch for 4.11-rc3
The GFS2 developers uncovered a really nasty problem that can lead to
random corruption and kernel panic, much like the last one. Andreas
Gruenbacher wrote a simple one-line patch to fix the problem."
* tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Avoid alignment hole in struct lm_lockname
Pull crypto fixes from Herbert Xu:
- self-test failure of crc32c on powerpc
- regressions of ecb(aes) when used with xts/lrw in s5p-sss
- a number of bugs in the omap RNG driver
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: s5p-sss - Fix spinlock recursion on LRW(AES)
hwrng: omap - Do not access INTMASK_REG on EIP76
hwrng: omap - use devm_clk_get() instead of of_clk_get()
hwrng: omap - write registers after enabling the clock
crypto: s5p-sss - Fix completing crypto request in IRQ handler
crypto: powerpc - Fix initialisation of crc32c context
Commit 88ffbf3e03 switches to using rhashtables for glocks, hashing over
the entire struct lm_lockname instead of its individual fields. On some
architectures, struct lm_lockname contains a hole of uninitialized
memory due to alignment rules, which now leads to incorrect hash values.
Get rid of that hole.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
CC: <stable@vger.kernel.org> #v4.3+
Pull networking fixes from David Miller:
1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver,
from Steffen Klassert.
2) Fix crashes when user tries to get_next_key on an LPM bpf map, from
Alexei Starovoitov.
3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from
Michal Schmidt.
4) We can get a divide by zero when TCP socket are morphed into
listening state, fix from Eric Dumazet.
5) Fix socket refcounting bugs in skb_complete_wifi_ack() and
skb_complete_tx_timestamp(). From Eric Dumazet.
6) Use after free in dccp_feat_activate_values(), also from Eric
Dumazet.
7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from
Jarod Wilson.
8) Fix use after free in vrf_xmit(), from David Ahern.
9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from
Alexey Kodanev.
10) Properly check napi_complete_done() return value in order to decide
whether to re-enable IRQs or not in amd-xgbe driver, from Thomas
Lendacky.
11) Fix double free of hwmon device in marvell phy driver, from Andrew
Lunn.
12) Don't crash on malformed netlink attributes in act_connmark, from
Etienne Noss.
13) Don't remove routes with a higher metric in ipv6 ECMP route replace,
from Sabrina Dubroca.
14) Don't write into a cloned SKB in ipv6 fragmentation handling, from
Florian Westphal.
15) Fix routing redirect races in dccp and tcp, basically the ICMP
handler can't modify the socket's cached route in it's locked by the
user at this moment. From Jon Maxwell.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits)
qed: Enable iSCSI Out-of-Order
qed: Correct out-of-bound access in OOO history
qed: Fix interrupt flags on Rx LL2
qed: Free previous connections when releasing iSCSI
qed: Fix mapping leak on LL2 rx flow
qed: Prevent creation of too-big u32-chains
qed: Align CIDs according to DORQ requirement
mlxsw: reg: Fix SPVMLR max record count
mlxsw: reg: Fix SPVM max record count
net: Resend IGMP memberships upon peer notification.
dccp: fix memory leak during tear-down of unsuccessful connection request
tun: fix premature POLLOUT notification on tun devices
dccp/tcp: fix routing redirect race
ucc/hdlc: fix two little issue
vxlan: fix ovs support
net: use net->count to check whether a netns is alive or not
bridge: drop netfilter fake rtable unconditionally
ipv6: avoid write to a possibly cloned skb
net: wimax/i2400m: fix NULL-deref at probe
isdn/gigaset: fix NULL-deref at probe
...
Pull libata fixes from Tejun Heo:
"Three libata fixes:
- fix for a circular reference bug in sysfs code which prevented
pata_legacy devices from being released after probe failure, which
in turn prevented devres from releasing the associated resources.
- drop spurious WARN in the command issue path which can be triggered
by a legitimate passthrough command.
- an ahci_qoriq specific fix"
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: qoriq: correct the sata ecc setting error
libata: drop WARN from protocol error in ata_sff_qc_issue()
libata: transport: Remove circular dependency at free time
Pull workqueue fix from Tejun Heo:
"If a delayed work is queued with NULL @wq, workqueue code explodes
after the timer expires at which point it's difficult to tell who the
culprit was.
This actually happened and the offender was net/smc this time.
Add an explicit sanity check for it in the queueing path"
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq
Pull percpu fixes from Tejun Heo:
- the allocation path was updating pcpu_nr_empty_pop_pages without the
required locking which can lead to incorrect handling of empty chunks
(e.g. keeping too many around), which is buggy but shouldn't lead to
critical failures. Fixed by adding the locking
- a trivial patch to drop an unused param from pcpu_get_pages()
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: remove unused chunk_alloc parameter from pcpu_get_pages()
percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages
Yuval Mintz says:
====================
qed: Fixes series
This address several different issues in qed.
The more significant portions:
Patch #1 would cause timeout when qedr utilizes the highest
CIDs availble for it [or when future qede adapters would utilize
queues in some constellations].
Patch #4 fixes a leak of mapped addresses; When iommu is enabled,
offloaded storage protocols might eventually run out of resources
and fail to map additional buffers.
Patches #6,#7 were missing in the initial iSCSI infrastructure
submissions, and would hamper qedi's stability when it reaches
out-of-order scenarios.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Missing in the initial submission, qed fails to propagate qedi's
request to enable OOO to firmware.
Fixes: fc831825f9 ("qed: Add support for hardware offloaded iSCSI")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Need to set the number of entries in database, otherwise the logic
would quickly surpass the array.
Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before iterating over the the LL2 Rx ring, the ring's
spinlock is taken via spin_lock_irqsave().
The actual processing of the packet [including handling
by the protocol driver] is done without said lock,
so qed releases the spinlock and re-claims it afterwards.
Problem is that the final spin_lock_irqrestore() at the end
of the iteration uses the original flags saved from the
initial irqsave() instead of the flags from the most recent
irqsave(). So it's possible that the interrupt status would
be incorrect at the end of the processing.
Fixes: 0a7fb11c23 ("qed: Add Light L2 support");
CC: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: fc831825f9 ("qed: Add support for hardware offloaded iSCSI")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving an Rx LL2 packet, qed fails to unmap the previous buffer.
Fixes: 0a7fb11c23 ("qed: Add Light L2 support");
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current Logic would allow the creation of a chain with U32_MAX + 1
elements, when the actual maximum supported by the driver infrastructure
is U32_MAX.
Fixes: a91eb52abb ("qed: Revisit chain implementation")
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Doorbell HW block can be configured at a granularity
of 16 x CIDs, so we need to make sure that the actual number
of CIDs configured would be a multiplication of 16.
Today, when RoCE is enabled - given that the number is unaligned,
doorbelling the higher CIDs would fail to reach the firmware and
would eventually timeout.
Fixes: dbb799c397 ("qed: Initialize hardware for new protocols")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
mlxsw: Couple of fixes
Couple or small fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The num_rec field is 8 bit, so the maximal count number is 255.
This fixes vlans learning not being enabled for wider ranges than 255.
Fixes: a4feea74cd ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The num_rec field is 8 bit, so the maximal count number is 255. This
fixes vlans not being enabled for wider ranges than 255.
Fixes: b2e345f9a4 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexis Berlemont