The SUN_TOP_CTRL_FAMILY_ID register is at a fixed absolute address for
all of our supported chips, so utilize its value to determine what the
UARTA base address should be based on the value we read.
Since the code is called both during decompressor when the MMU is off,
and after the MMU has been turned on in the kernel, and we want to do
the lookup only once, we use the same technique as tegra.S and have a
shared storage location between the decompressor and the kernel.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Last CLPS711X CPU register is PLLR has 0xa5a8 address, so we can reduce
the map to 48k and align the end of the static at VMALLOC_START.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Exynos542x SoCs using A15+A7 can boot to A15 or A7. If it boots using
A7 (like on Odroid XU family boards), it can't choose right UART
physical address only the part number of CP15. Fix the detection logic
by checking the Cluster ID additionally.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
[k.kozlowski: Extend commit message]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The exynos low-level debug macros need to be fixed if the system is being
built big endian. Add the necessary endian swaps for accessing the registers
to get output working again
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
AT91 still uses an offset (0x0100 0000) from the physical address to map
the debug UART. This is unfortunate as for some platforms (sama5d3 and
earlier), it ends up in the PCI zone and PCI is enabled in multi_v7.
Switch to DEBUG_UART_VIRT to solve that.
Tested on sama5d3 and 9g20.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
- Enable big endian mode support for i.MX platform
- Add support for i.MX6QP SoC which is the latest i.MX6 family addition
- Add basic suspend/resume support for i.MX25
- A couple of i.MX7D support updates
- A few random code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW1Z/XAAoJEFBXWFqHsHzOfUEH/1oiBDMBJEKH8/vmipV5cPmw
TAcK4W/1mS0SZo8xSYyi0iGcs5loA7fiypBZv6tKxI2IZS1w3sbJ0eHeeUUkURsG
okMpHCMeuEdjnWH/nTdABKGIlK1nAtwuDuD0BJqlk1VDLY/pIUY5kkoWsrXMlzwO
VkS2ic90HjsijmLH5y38kgo6RvkDDBxMzl8lzTxwfMNO8P5zCn9Wiqeerlbt/+Nw
+n8aDzow4XKuOaHaoh6/C9RSKkobCAs/RVwoYUhv4QCk1zC6rJ1Oq6yuYGJgiIOX
+gtdAIxTVv4RDJfEWEMT+N9SFM4qcFDAGtGPoXZyRKeedC5/xXuD2yNn2RUzShc=
=RoB/
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
Merge "i.MX SoC update for 4.6" from Shawn Guo:
- Enable big endian mode support for i.MX platform
- Add support for i.MX6QP SoC which is the latest i.MX6 family addition
- Add basic suspend/resume support for i.MX25
- A couple of i.MX7D support updates
- A few random code cleanups
* tag 'imx-soc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Make reset_control_ops const
ARM: imx: Do L2 errata only if the L2 cache isn't enabled
ARM: imx: select ARM_CPU_SUSPEND only for imx6
ARM: mx25: Add basic suspend/resume support
ARM: imx: Add msl code support for imx6qp
ARM: imx: enable big endian mode
ARM: imx: use endian-safe readl/readw/writel/writew
ARM: imx7d: correct chip version information
ARM: imx: select HAVE_ARM_ARCH_TIMER if selected i.MX7D
ARM: imx6: fix cleanup path in imx6q_suspend_init()
In an invalid randconfig build (fixed by another patch),
I ran across this warning:
arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]
#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
As Russell pointed out, we should never #define a macro starting
with CONFIG_ in a source file, as that is rather confusing.
This renames the macro to avoid the symbol clash.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
- SLCR early init
- Fix L2 cache data corruption
- Fix early printk uart setting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbO/kIACgkQykllyylKDCE55wCdEI40Q6+gUEa4ZEH2Pkl2LqK7
e/oAn23veiR4MaMZb3jKVLp1Lzt83x1B
=qI6y
-----END PGP SIGNATURE-----
Merge tag 'zynq-soc-for-4.6' of https://github.com/Xilinx/linux-xlnx into next/soc
Merge "ARM: Xilinx Zynq patches for v4.6" from Michal Simek:
- SLCR early init
- Fix L2 cache data corruption
- Fix early printk uart setting
* tag 'zynq-soc-for-4.6' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: Move early printk virtual address to vmalloc area
ARM: zynq: address L2 cache data corruption
ARM: zynq: initialize slcr mapping earlier
The patch
"ARM: 8432/1: move VMALLOC_END from 0xff000000 to 0xff800000"
(sha1: 6ff0966052)
has moved also start of VMALLOC area because size didn't change.
That's why origin location of vmalloc was
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
and now is
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
That's why uart virtual addresses need to be changed to reflect this new
memory setup. Starting address should be vmalloc start address.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Some SoCs use a Palmchip BK-310x UART which is mostly 16550 compatible
but with a different register layout. While this UART has previously
only been supported in MIPS based chips (Alchemy, Ralink), the ARM based
SMP87xx series from Sigma Designs also uses it.
This patch allows the debug console to work with this type of UART.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable ARM big-endian mode on mach-imx. This requires adding some
byte swapping in the debug functions (which otherwise hang forever)
and of course the secondary core bringup.
Tested (on top of 4.4) on i.MX6 HummingBoard quad-core (IMX6Q).
The patch is pretty much as suggested by Arnd Bergmann, thanks!
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Footbridge has two debug ports that are handled a bit differently:
The 8250 port uses the normal debug/8250.S implementation that is shared
with a lot of other platforms, but it relies on the DEBUG_UART_8250
option to be turned on automatically instead of being selected by
DEBUG_FOOTBRIDGE_COM1 as we do for most other platforms. I'm changing
this to use a 'select' and change the dependency to the debug symbol
rather than the platform symbol for consistency.
The DC21285 UART has a separate top-level option, and relies on
the traditional include/mach/debug-macro.S method. With the s3c64xx
multiplatform series queued up for 4.5, it is now the last one that does
this, so by moving this file to include/debug/dc21285.S, we can get
all platforms to do things the same way.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Instead of having to add a new configuration option each time support for
new SoC is added, use CONFIG_DEBUG_UART_PHYS. For now,
CONFIG_DEBUG_UART_VIRT is automatically computed.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
- Add i.MX6 Ultralite SoC support, which is the newest addition to
i.MX6 family. It integrates a single Cortex-A7 core and a power
management module that reduces the complexity of external power
supply and simplifies power sequencing.
- Change SNVS RTC driver to use syscon interface for register access,
and add SNVS power key driver support.
- Add a second clock for mxc rtc driver, and support device tree probe
for the driver.
- Add FEC MAC reference clock and phy fixup initialization for i.MX6UL
platform.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVyg8nAAoJEFBXWFqHsHzOQC8H/iY+cdNfAWIxYmt2CeF607su
fLaycUSUPqPAERUTcHpjKyiKkRg2NWV7vFVWCkKaQ3RZ+IW6xNntkqMxzocS1sh2
+70Ckp+B0orGuo96PkEXua9fNPf8/yaGiDhuJpK966VRRSSXRD15uOuqHAJ2Jz/v
HEnEm3KANSSYS1heEJRqiiCsqhADRWl2RzgfV327aXtScP9zXlbJGlEc/jUVAY65
wbqjsXdySeS3rECNMAYXnPU7IlK4NkRqrOi1JmTJCBlXqV2b6dBfjgIu9jOa91UG
yRj7IEBJemqT4Ap1ee2NR3H1lDngt2JKg9XqRDL3j9alYvhAWGvhSY2UH2iPrFg=
=emep
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
The i.MX SoC changes for 4.3:
- Add i.MX6 Ultralite SoC support, which is the newest addition to
i.MX6 family. It integrates a single Cortex-A7 core and a power
management module that reduces the complexity of external power
supply and simplifies power sequencing.
- Change SNVS RTC driver to use syscon interface for register access,
and add SNVS power key driver support.
- Add a second clock for mxc rtc driver, and support device tree probe
for the driver.
- Add FEC MAC reference clock and phy fixup initialization for i.MX6UL
platform.
* tag 'imx-soc-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
rtc: snvs: select option REGMAP_MMIO
ARM: imx6ul: add fec MAC refrence clock and phy fixup init
ARM: imx6ul: add fec bits to GPR syscon definition
rtc: mxc: add support of device tree
dt-binding: document the binding for mxc rtc
rtc: mxc: use a second rtc clock
input: snvs_pwrkey: use "wakeup-source" as deivce tree property name
Document: devicetree: input: imx: i.mx snvs power device tree bindings
input: keyboard: imx: add snvs power key driver
Document: dt: fsl: snvs: change support syscon
rtc: snvs: use syscon to access register
ARM: imx: add low-level debug support for i.mx6ul
ARM: imx: add i.mx6ul msl support
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix earlyprintk, jump trampoline for SMP
- Update git tree location
- Setup PL310 aux (bit 22)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iEYEABECAAYFAlW7MWAACgkQykllyylKDCHkTACfT3Kzs+Cl7jc9A4kQ6dkbUqtC
E1MAn0g3yHcqGHgUtfyHu6lXtptJFbDn
=DuTZ
-----END PGP SIGNATURE-----
Merge tag 'zynq-soc-for-4.3' of https://github.com/Xilinx/linux-xlnx into next/soc
arm: Xilinx Zynq SoC patches for v4.2
- Fix earlyprintk, jump trampoline for SMP
- Update git tree location
- Setup PL310 aux (bit 22)
* tag 'zynq-soc-for-4.3' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: reserve space for jump target in secondary trampoline
clk: zynq: remove redundant $(CONFIG_ARCH_ZYNQ) in Makefile
MAINTAINERS: Update Zynq git tree location
ARM: zynq: Set bit 22 in PL310 AuxCtrl register (6395/1)
ARM: zynq: Fix earlyprintk in big endian mode
Signed-off-by: Olof Johansson <olof@lixom.net>
Add Kconfig entries, header file changes and addition to the documentation.
The early debug infrastructure is also added for easy development.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
earlyprintk messages are not appearing on the terminal
emulator during a big endian kernel boot. In BE mode
sending full words to UART will result in unprintable
characters as they are byte swapped versions of printable
ones. So send only bytes.
Signed-off-by: Arun Chandran <achandran@mvista.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Enable low-level debug support for i.MX6UL by adding the
debug port definitions for the SoC.
Singed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Add new SoC i.MX7D support, which integrates two Cortex-A7 and one
Cortex-M4 cores.
- Support suspend from IRAM on i.MX53, so that DDR pins can be set to
high impedance for more power saving during suspend.
- Move i.MX clock drivers from arch/arm/mach-imx to drivers/clk/imx.
- Move i.MX GPT timer driver from arch/arm/mach-imx into
drivers/clocksource.
- A couple of clock driver update for VF610 and i.MX6Q.
- A few random code correction and improvement.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVb7grAAoJEFBXWFqHsHzOWS0H/RXV1UjvsJTfK8+KR2SGY5QO
3hU4YQYpnkukG2OtxAaWKXzIh+xeINqJ02cws/zyEfVZFsZp/i5Z7EM5811qQeNC
f9uCtFCNynTnWjUP9YXELgAX3/DPHMr+Em5QGOWwh+311YypJyP7CttsJvmjJIUN
qGYXdpy2xhqKgSGrnI+dhpxTdhtm/jmsggoM8qqi2aYB3c3rnWCc6QSBMR8oxFKB
Tmxd/cc/6Pvbp7W+AztTb/z8UD21UJkn96FhUb9563HKjf7kvbP4ydJTwhBxfyQu
YxE4kkejrnVNaUl1Tkqmf7rTgLKaU92nrLCuBDI/91OET+GQtq2R5fE8iMPs29k=
=c254
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
The i.MX SoC updates for 4.2:
- Add new SoC i.MX7D support, which integrates two Cortex-A7 and one
Cortex-M4 cores.
- Support suspend from IRAM on i.MX53, so that DDR pins can be set to
high impedance for more power saving during suspend.
- Move i.MX clock drivers from arch/arm/mach-imx to drivers/clk/imx.
- Move i.MX GPT timer driver from arch/arm/mach-imx into
drivers/clocksource.
- A couple of clock driver update for VF610 and i.MX6Q.
- A few random code correction and improvement.
* tag 'imx-soc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits)
ARM: imx: imx7d requires anatop
clocksource: timer-imx-gpt: remove include of <asm/mach/time.h>
ARM: imx: move timer driver into drivers/clocksource
ARM: imx: remove platform headers from timer driver
ARM: imx: provide gpt device specific irq functions
ARM: imx: get rid of variable timer_base
ARM: imx: define gpt register offset per device type
ARM: imx: move clock event variables into imx_timer
ARM: imx: set up .set_next_event hook via imx_gpt_data
ARM: imx: setup tctl register in device specific function
ARM: imx: initialize gpt device type for DT boot
ARM: imx: define an enum for gpt timer device type
ARM: imx: move timer resources into a structure
ARM: imx: use relaxed IO accessor in timer driver
ARM: imx: make imx51/3 suspend optional
ARM: clk-imx6q: refine sata's parent
ARM: imx: clk-v610: Add clock for I2C2 and I2C3
ARM: mach-imx: iomux-imx31: Use DECLARE_BITMAP
ARM: imx: add imx7d clk tree support
ARM: clk: imx: update pllv3 to support imx7
...
Conflicts:
arch/arm/mach-imx/Kconfig
Add low level uart debug support for imx7d
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Bai Ping <b51503@freescale.com>
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Remove the needless differences between MMU/!MMU addruart calls.
This allows to use the same addruart macro on SoC level. Useful
for SoC consisting of multiple CPUs with and without MMU such as
Freescale Vybrid.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the UART0 peripheral for low level debug. Only the UART port 0 is
currently supported.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If the 8250 debug code is used in word mode on an big endian
host then the writes need to be change into little endian for
the bus.
Note, we have to re-convert the value back as the debug code
will inspect the value after writing it to see if a newline
has been written.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* Removal of mach-msm and associated drivers cleanups that have been
ack'd by associated maintainers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: GPGTools - https://gpgtools.org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=rBCl
-----END PGP SIGNATURE-----
Merge tag 'qcom-cleanup-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/cleanup
Merge "qcom cleanup changes for 4.1" from Kumar Gala:
General cleanups for MSM/QCOM for 4.1
* Removal of mach-msm and associated drivers cleanups that have been
ack'd by associated maintainers
* tag 'qcom-cleanup-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
mmc: Remove msm_sdcc driver
gpio: Remove gpio-msm-v1 driver
ARM: Remove mach-msm and associated ARM architecture code
+ Linux 4.0-rc3
Signed-off-by: Olof Johansson <olof@lixom.net>
The maintainers for mach-msm no longer have any plans to support
or test the platforms supported by this architecture[1]. Most likely
there aren't any active users of this code anyway, so let's
delete it.
[1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Linux may be used without MMU on atmel SoCs, fix debug in this configuration.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
New and updated SoC support. Also included are some cleanups where the
platform maintainers hadn't separated cleanups from new developent in
separate branches.
Some of the larger things worth pointing out:
- A large set of changes from Alexandre Belloni and Nicolas Ferre
preparing at91 platforms for multiplatform and cleaning up quite a
bit in the process.
- Removal of CSR's "Marco" SoC platform that never made it out to the
market. We love seeing these since it means the vendor published
support before product was out, which is exactly what we want!
New platforms this release are:
- Conexant Digicolor (CX92755 SoC)
- Hisilicon HiP01 SoC
- CSR/sirf Atlas7 SoC
- ST STiH418 SoC
- Common code changes for Nvidia Tegra132 (64-bit SoC)
We're seeing more and more platforms having a harder time labelling
changes as cleanups vs new development -- which is a good sign that
we've come quite far on the cleanup effort. So over time we might start
combining the cleanup and new-development branches more.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=szd9
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"New and updated SoC support. Also included are some cleanups where
the platform maintainers hadn't separated cleanups from new developent
in separate branches.
Some of the larger things worth pointing out:
- A large set of changes from Alexandre Belloni and Nicolas Ferre
preparing at91 platforms for multiplatform and cleaning up quite a
bit in the process.
- Removal of CSR's "Marco" SoC platform that never made it out to the
market. We love seeing these since it means the vendor published
support before product was out, which is exactly what we want!
New platforms this release are:
- Conexant Digicolor (CX92755 SoC)
- Hisilicon HiP01 SoC
- CSR/sirf Atlas7 SoC
- ST STiH418 SoC
- Common code changes for Nvidia Tegra132 (64-bit SoC)
We're seeing more and more platforms having a harder time labelling
changes as cleanups vs new development -- which is a good sign that
we've come quite far on the cleanup effort. So over time we might
start combining the cleanup and new-development branches more"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits)
ARM: at91/trivial: unify functions and machine names
ARM: at91: remove at91_dt_initialize and machine init_early()
ARM: at91: change board files into SoC files
ARM: at91: remove at91_boot_soc
ARM: at91: move alternative initial mapping to board-dt-sama5.c
ARM: at91: merge all SOC_AT91SAM9xxx
ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
ARM: digicolor: select syscon and timer
ARM: zynq: Simplify SLCR initialization
ARM: zynq: PM: Fixed simple typo.
ARM: zynq: Setup default gpio number for Xilinx Zynq
ARM: digicolor: add low level debug support
ARM: initial support for Conexant Digicolor CX92755 SoC
ARM: OMAP2+: Add dm816x hwmod support
ARM: OMAP2+: Add clock domain support for dm816x
ARM: OMAP2+: Add board-generic.c entry for ti81xx
ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage
ARM: at91: remove unused mach/system_rev.h
ARM: at91: stop using HAVE_AT91_DBGUx
ARM: at91: fix ordering of SRAM and PM initialization
...
This is a good healthy set of various code removals. Total net delta is 8100
lines removed.
Among the larger cleanups are:
- Removal of old Samsung S3C DMA infrastructure by Arnd
- Removal of the non-DT version of the 'lager' board by Magnus Damm
- General stale code removal on OMAP and Davinci by Rickard Strandqvist
- Removal of non-DT support on am3517 platforms by Tony Lindgren
... plus several other cleanups of various platforms across the board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tsjK
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"This is a good healthy set of various code removals. Total net delta
is 8100 lines removed.
Among the larger cleanups are:
- Removal of old Samsung S3C DMA infrastructure by Arnd
- Removal of the non-DT version of the 'lager' board by Magnus Damm
- General stale code removal on OMAP and Davinci by Rickard Strandqvist
- Removal of non-DT support on am3517 platforms by Tony Lindgren
... plus several other cleanups of various platforms across the board"
* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits)
ARM: sirf: drop redundant function and marco declaration
arm: omap: specify PMUs are for ARMv7 CPUs
arm: shmobile: specify PMUs are for ARMv7 CPUs
arm: iop: specify PMUs are for XScale CPUs
arm: pxa: specify PMUs are for XScale CPUs
arm: realview: specify PMU types
ARM: SAMSUNG: remove unused DMA infrastructure
ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
ARM: davinci: Remove CDCE949 driver
ARM: at91: remove useless at91rm9200_set_type()
ARM: at91: remove useless at91rm9200_dt_initialize()
ARM: at91: move debug-macro.S into the common space
ARM: at91: remove useless at91_sysirq_mask_rtx
ARM: at91: remove useless config MACH_AT91SAM9_DT
ARM: at91: remove useless config MACH_AT91RM9200_DT
ARM: at91: remove unused mach/memory.h
ARM: at91: remove useless header file includes
ARM: at91: remove unneeded header file
rtc: at91/Kconfig: remove useless options
ARM: at91/Documentation: add a README for Atmel SoCs
...
Use the USART peripheral as UART for low level debug. Only the UA0 port is
currently supported.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Various bug fixes and minor feature additions to scm code
* Added big-endian support to debug MSM uart
* Added big-endian support to ARCH_QCOM
* Cleaned up some Kconfig options associated with ARCH_QCOM
* Added Andy Gross as co-maintainer
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: GPGTools - https://gpgtools.org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=04jb
-----END PGP SIGNATURE-----
Merge tag 'qcom-soc-for-3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/soc
merge "qcom SoC changes for v3.20-2" from Kumar Gala:
Qualcomm ARM Based SoC Updates for v3.20-2
* Various bug fixes and minor feature additions to scm code
* Added big-endian support to debug MSM uart
* Added big-endian support to ARCH_QCOM
* Cleaned up some Kconfig options associated with ARCH_QCOM
* Added Andy Gross as co-maintainer
* tag 'qcom-soc-for-3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
MAINTAINERS: Add co-maintainer for ARM/Qualcomm Support
ARM: qcom: Drop unnecessary selects from ARCH_QCOM
ARM: qcom: Fix SCM interface for big-endian kernels
ARM: qcom: scm: Clarify boot interface
ARM: qcom: Add SCM warmboot flags for quad core targets.
ARM: qcom: scm: Add logging of actual return code from scm call
ARM: qcom: scm: Flush the command buffer only instead of the entire cache
ARM: qcom: scm: Get cacheline size from CTR
ARM: qcom: scm: Fix incorrect cache invalidation
ARM: qcom: Select ARCH_SUPPORTS_BIG_ENDIAN
ARM: debug: msm: Support big-endian CPUs
ARM: debug: Update MSM and QCOM DEBUG_LL help
Signed-off-by: Olof Johansson <olof@lixom.net>
- By reworking the PM code, we can remove the AT91 more specific initialization
- We are using DT for SRAM initialization now, so we can remove its explicit
mapping
- The PMC clock driver now hosts IDLE function for at91rm9200 with other
SoCs ones.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUuUdxAAoJEAf03oE53VmQWvwIAKPKi90sVTuwDDf4qMBrkGgU
IZRKX3imm5zG2HezDFp9tNxKUK3uXnJDmOlNgFKo1L+Vx/42IHew9Fy+J0vtzWUh
y1bWwUI60wXd89tfDFeHmhk93yu5xn9Dv3dd9xlLbia2tUbHzz0E8ZDx4D2d9R63
qdTSfB+tXlPi1Zjh0X+XLdx7cBKut//P8f+07hW3I6p1hy8E6AhtvIoCFJT3lbsU
POiRlBFoeLoXAcHnZMBhP+ZrjHB5sfoZe83Xr5zpsW7wuo+TtpcH8H1D0QOYcrpn
7YBzNqmrpLrtgCsuMJ92c/yaLR/k4TqhiOCVN9Z5lY3Ei2kUJj37NeqGspljhxI=
=Ftvs
-----END PGP SIGNATURE-----
Merge tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/soc
Merge "at91: cleanup for 3.20 #2" from Nicolas Ferre:
Second batch of cleanup for 3.20:
- By reworking the PM code, we can remove the AT91 more specific initialization
- We are using DT for SRAM initialization now, so we can remove its explicit
mapping
- The PMC clock driver now hosts IDLE function for at91rm9200 with other
SoCs ones.
* tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (37 commits)
ARM: at91: move at91rm9200_idle() to clk/at91/pmc.c
ARM: at91: remove unused at91_init_sram
ARM: at91: sama5d4: remove useless call to at91_init_sram
ARM: at91: remove useless map_io
ARM: at91: pm: prepare for multiplatform
ARM: at91: pm: add UDP and UHP checks to newer SoCs
ARM: at91: pm: use the mmio-sram pool to access SRAM
ARM: at91: pm: rework cpu detection
ARM: at91: dts: sama5d3: add ov2640 camera sensor support
ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK
ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}
ARM: at91: dts: sama5d3: move the isi mck pin to mb
ARM: at91: dts: sama5d3: add missing pins of isi
ARM: at91: dts: sama5d3: split isi pinctrl
ARM: at91: dts: sama5d3: add isi clock
ARM: at91/dt: ethernut5: use at91sam9xe.dtsi
ARM: at91/dt: Add a dtsi for at91sam9xe
ARM: at91/dt: add SRAM nodes
ARM: at91/dt: at91rm9200ek: enable RTC
ARM: at91/dt: rm9200: add RTC node
...
Signed-off-by: Olof Johansson <olof@lixom.net>
As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT
which default to UART1 but allow a user to configure UART2 or UART3.
We also introduce symbolic names for the registers and flags.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
As part of the migration a couple of uart definitions have been copied
from of the platform specific header files.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
this patch adds UART0 and UART1 as LLUART port, as the new Atlas7
registers layout are different, it also refines some names of old
hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT
to define different base addresses for multiple ports.
Signed-off-by: Guo Zeng <Guo.Zeng@csr.com>
Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
If the CPU is in big-endian mode these macros will access the
hardware incorrectly. Reverse thins as necessary to fix this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Move debug-macro.S from include/mach/ to include/debug where all other common
debug macros are.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Marco will not be supported any more. it has been replaced by CSR
Atlas7.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Since there is no public documentation, this patch also provide register
offsets for different UART units on this SoC.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Add early debugging support using SCIF(A)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=O/9v
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc4-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Fourth Round of Renesas ARM Based SoC Updates for v3.19" from Simon Horman:
* Add early debugging support using SCIF(A)
* tag 'renesas-soc4-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Add early debugging support using SCIF(A)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
StrongARM debug-macro.S is quite standalone thing, depending only on
register mappings. Move it to proper place and add Kconfig entry.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add serial port debug macros for the SCIF(A) serial ports.
This includes all supported shmobile SoCs, except for EMEV2.
The configuration logic (both Kconfig and #ifdef) is more complicated than
one would expect, for several reasons:
1. Not all SoCs have the same serial devices, and they're not always
at the same addresses.
2. There are two different types: SCIF and SCIFA. Fortunately they can
easily be distinguished by physical address.
3. Not all boards use the same serial port for the console.
The defaults correspond to the boards that are supported in
mainline. If you want to use a different serial port, just change
the value of CONFIG_DEBUG_UART_PHYS, and the rest will auto-adapt.
4. debug_ll_io_init() maps the SCIF(A) registers to a fixed virtual
address. 0xfdxxxxxx was chosen, as it should lie below VMALLOC_END
= 0xff000000, and must not conflict with the 2 MiB reserved region
at PCI_IO_VIRT_BASE = 0xfee00000.
- On SoCs not using the legacy machine_desc.map_io(),
debug_ll_io_init() is called by the ARM core code.
- On SoCs using the legacy machine_desc.map_io(),
debug_ll_io_init() must be called explicitly. Calls are added
for r8a7740, r8a7779, sh7372, and sh73a0.
This was derived from the r8a7790 version by Laurent Pinchart.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Merge "ARM: BCM: Broadcom BCM63138 support" from Florian Fainelli:
This patchset adds very minimal support for the BCM63138 SoC which is
a xDSL SoC using a dual Cortex A9 CPU complex.
* tag 'bcm63138-v4' of http://github.com/brcm/linux:
MAINTAINERS: add entry for the Broadcom BCM63xx ARM SoCs
ARM: BCM63XX: add BCM963138DVT Reference platform DTS
ARM: BCM63XX: add BCM63138 minimal Device Tree
ARM: BCM63XX: add low-level UART debug support
ARM: BCM63XX: add basic support for the Broadcom BCM63138 DSL SoC
Conflicts:
arch/arm/Kconfig.debug
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the UART definitions needed to support earlyprintk for MesonX SoCs
on UARTAO.
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Broadcom BCM63xx DSL SoCs have a different UART implementation for which
we need specially crafted low-level debug assembly code to support. Add
support for this using the standard definitions provided in
include/linux/serial_bcm63xx.h (shared with their MIPS counterparts).
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This is the bulk of new SoC enablement and other platform changes for 3.17:
* Samsung S5PV210 has been converted to DT and multiplatform
* Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms
* Kirkwood, one of the popular Marvell platforms, is folded into the
mvebu platform code, removing mach-kirkwood.
* Hwmod data for TI AM43xx and DRA7 platforms.
* More additions of Renesas shmobile platform support
* Removal of plat-samsung contents that can be removed with S5PV210 being
multiplatform/DT-enabled and the other two old platforms being removed.
New platforms (most with only basic support right now):
* Hisilicon X5HD2 settop box chipset is introduced
* Mediatek MT6589 (mobile chipset) is introduced
* Broadcom BCM7xxx settop box chipset is introduced
+ as usual a lot other pieces all over the platform code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=5TJ6
-----END PGP SIGNATURE-----
Merge tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"This is the bulk of new SoC enablement and other platform changes for
3.17:
- Samsung S5PV210 has been converted to DT and multiplatform
- Clock drivers and bindings for some of the lower-end i.MX 1/2
platforms
- Kirkwood, one of the popular Marvell platforms, is folded into the
mvebu platform code, removing mach-kirkwood
- Hwmod data for TI AM43xx and DRA7 platforms
- More additions of Renesas shmobile platform support
- Removal of plat-samsung contents that can be removed with S5PV210
being multiplatform/DT-enabled and the other two old platforms
being removed
New platforms (most with only basic support right now):
- Hisilicon X5HD2 settop box chipset is introduced
- Mediatek MT6589 (mobile chipset) is introduced
- Broadcom BCM7xxx settop box chipset is introduced
+ as usual a lot other pieces all over the platform code"
* tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits)
ARM: hisi: remove smp from machine descriptor
power: reset: move hisilicon reboot code
ARM: dts: Add hix5hd2-dkb dts file.
ARM: debug: Rename Hi3716 to HIX5HD2
ARM: hisi: enable hix5hd2 SoC
ARM: hisi: add ARCH_HISI
MAINTAINERS: add entry for Broadcom ARM STB architecture
ARM: brcmstb: select GISB arbiter and interrupt drivers
ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
ARM: configs: enable SMP in bcm_defconfig
ARM: add SMP support for Broadcom mobile SoCs
Documentation: arm: misc updates to Marvell EBU SoC status
Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
ARM: mvebu: fix build without platforms selected
ARM: mvebu: add cpuidle support for Armada 38x
ARM: mvebu: add cpuidle support for Armada 370
cpuidle: mvebu: add Armada 38x support
cpuidle: mvebu: add Armada 370 support
cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
ARM: mvebu: export the SCU address
...
Move debug-macro.S from mach/include to include/debug where
all other common debug macros are.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
One more step to allowing CLPS711X to participate in the
multi-platform defconfig.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
- add new SoCs support
: exynos3250, 5260, 5410 and 5800
- enable multi-platform on exynos
: consolidate exynos related Kconfig entries
Note that this requires tags/samsung-cleanup and tags/samsung-clk-2
because of mostly migration exynos specific macros into mach-exynos
and exynos related Kconfig entries.
One more merge conflict happens in arch/arm/Kconfig for ARCH_EXYNOS
due to SRAM stuff, even though tried to sort them out. Since just
resolving it would be better I think, please remove ARCH_EXYNOS in
arch/arm/Kconfig when merge conflict happens.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=/Vpg
-----END PGP SIGNATURE-----
Merge tag 'samsung-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
Samsung Exynos updates for 3.16
- add new SoCs support
: exynos3250, 5260, 5410 and 5800
- enable multi-platform on exynos
: consolidate exynos related Kconfig entries
* tag 'samsung-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (22 commits)
ARM: EXYNOS: Enable multi-platform build support
ARM: EXYNOS: Consolidate Kconfig entries
ARM: EXYNOS: Add support for EXYNOS5410 SoC
ARM: EXYNOS: Support secondary CPU boot of Exynos3250
ARM: EXYNOS: Add Exynos3250 SoC ID
ARM: EXYNOS: Add 5800 SoC support
ARM: EXYNOS: initial board support for exynos5260 SoC
cpufreq: exynos: Fix the compile error
ARM: S3C24XX: move debug-macro.S into the common space
ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
ARM: S3C24XX: trim down debug uart handling
ARM: compressed/head.S: remove s3c24xx special case
ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
ARM: EXYNOS: Remove exynos_subsys registration
ARM: EXYNOS: Remove duplicate lines in Makefile
ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
ARM: dts: Remove g2d_pd node for exynos5420
ARM: dts: Remove mau_pd node for exynos5420
ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add support for BIG Endian
- Add SOC_BUS support
- Sort Kconfig options
- Fix early console
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iEYEABECAAYFAlOCxdwACgkQykllyylKDCEydwCglWoRgU1kvPH6oqyH5esHv7L3
oY4AnA+t3msa91ovFFbsCm2xW77QbbC6
=Ubf9
-----END PGP SIGNATURE-----
Merge tag 'zynq-cleanup-for-3.16' of git://git.xilinx.com/linux-xlnx into next/soc
Merge "Xilinx Zynq changes for v3.16" from Michal Simek:
arm: Xilinx Zynq cleanup patches for v3.16
- Add support for BIG Endian
- Add SOC_BUS support
- Sort Kconfig options
- Fix early console
* tag 'zynq-cleanup-for-3.16' of git://git.xilinx.com/linux-xlnx:
ARM: zynq: Enable big-endian
ARM: zynq: Fix uart0 early console virtual address
clocksource: cadence_ttc: Use readl/writel_relaxed instead of __raw
ARM: zynq: Sort Kconfig options
ARM: zynq: Add support for SOC_BUS
Signed-off-by: Olof Johansson <olof@lixom.net>
Florian Fainelli