Commit Graph

1822 Commits

Author SHA1 Message Date
Linus Torvalds 456febd299 ARM: SoC fixes for 3.16
A new set of bug fixes for 3.16, containing patches for seven platforms:
 
 at91:
     - drivers/misc fix for Kconfig PWM symbol
     - correction of several values in DT after conversion to CCF
     - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc
 
 imx:
     - Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51,
       because controller base CD/WP is not working in esdhc driver due to
       runtime PM support
     - A couple of random ventana gw5xxx board fixes
     - Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving
       IPUv3 driver out of staging tree
     - Fix enet/fec clock selection on imx6sl
     - Fix display node on imx53-m53evk board
     - A couple of Cubox-i updates from Russell, which were omitted from
       the merge window due to dependency
 
 integrator:
     - fix an OF-related regression against 3.15
 
 mvebu:
     - mvebu (v7)
        - Fix broken SoC ID detection
        - Select ARM_CPU_SUSPEND for v7
        - Remove armada38x compatible string (no users yet)
        - Enable Dove SoC in mvebu_v7_defconfig
     - kirkwood
        - Fix phy-connection-type on GuruPlug board
 
 qcom:
     - enable gsbi driver in defconfig
     - fix section mismatch warning in serial driver
 
 samsung:
     - use WFI macro in platform_do_lowpower because exynos cpuhotplug
       includes a hardcoded WFI instruction and it causes compile error
       in Thumb-2 mode.
     - fix GIC reg sizes for exynos4 SoCs
     - remove reset timer counter value during boot and resume for mct
       to fix a big jump in printk timestamps
     - fix pm code to check cortex-A9 for another exynos SoCs
     - don't rely on firmware's secondary_cpu_start for mcpm
 
 sti:
     - Ethernet clocks were wrongly defined for STiH415/416 platforms
     - STiH416 B2020 revision E DTS file name contained uppercase, change to
       lowercase.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAU6sVyGCrR//JCVInAQIJVw//f/6zO73c9xNdDfDfOV7HHC0W4WQ5RBJE
 +VFpj+DKWDKWVgauW/j6FVC2uvwb/v7arEB7Ta/xE2dk/q6VwMzsOJbtFzrrD/Un
 s3VP7M4VEzARghQCUhNgGxPw6UCpBNql8JdSo+oMU+TYfSa532EZBT7It3irkjHP
 Yfbk7YOvLR7zXjDsTlUtiDSs3XLAD0VqpTGYi8IO3S6wbGa0jWaE3LOq9kSjZlDv
 oaFeFafJSx/o9NqLEC3a+IvNxslc6Crhin+3nSp+HDntbdgehdEVgC9aATMhkPXM
 IjVPzerHNzCMocxM44vtI0lpDmwPq42Di8IxjWFwtGk+yxJbkAfX/1cn1R5Y5ER8
 ZrVBixX9U47Rd8UP6CzCGsmJOS+rU+owlTTup7phBebxVEpWnUjigDSH3Eb956CO
 y4M9zJvPgUmhd/AVywHxvRGpPXC1EUcwnF0uUB0EDG22ZfsDmdfjvUqY4Klhcsjo
 BvsDNLBGQ6HUhhzEYoOBOPyYsm3yAhyFK1Z451yt5P7R44+lSVmyXWEyEpPrTwl9
 +wVGY49pFwd/xV/a7M8BAZYvkbNZU0dcW0ZPMK2mtFzn9vEESRVIPqm0NEOF0HHS
 kEX6XpZhkJjfPvsXWTeiCFnYnI0ghlJcWE6lMWbL1dWxqFYlUC9lIjN0PJ44M7oy
 cBKPiJ27MIM=
 =fJMs
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A new set of bug fixes for 3.16, containing patches for seven
  platforms:

  at91:
    - drivers/misc fix for Kconfig PWM symbol
    - correction of several values in DT after conversion to CCF
    - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc

  imx:
    - Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51,
      because controller base CD/WP is not working in esdhc driver due to
      runtime PM support
    - A couple of random ventana gw5xxx board fixes
    - Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving
      IPUv3 driver out of staging tree
    - Fix enet/fec clock selection on imx6sl
    - Fix display node on imx53-m53evk board
    - A couple of Cubox-i updates from Russell, which were omitted from
      the merge window due to dependency

  integrator:
    - fix an OF-related regression against 3.15

  mvebu:
    - mvebu (v7)
       - Fix broken SoC ID detection
       - Select ARM_CPU_SUSPEND for v7
       - Remove armada38x compatible string (no users yet)
       - Enable Dove SoC in mvebu_v7_defconfig
    - kirkwood
       - Fix phy-connection-type on GuruPlug board

  qcom:
    - enable gsbi driver in defconfig
    - fix section mismatch warning in serial driver

  samsung:
    - use WFI macro in platform_do_lowpower because exynos cpuhotplug
      includes a hardcoded WFI instruction and it causes compile error
      in Thumb-2 mode.
    - fix GIC reg sizes for exynos4 SoCs
    - remove reset timer counter value during boot and resume for mct
      to fix a big jump in printk timestamps
    - fix pm code to check cortex-A9 for another exynos SoCs
    - don't rely on firmware's secondary_cpu_start for mcpm

  sti:
    - Ethernet clocks were wrongly defined for STiH415/416 platforms
    - STiH416 B2020 revision E DTS file name contained uppercase, change to
      lowercase"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
  ARM: at91/dt: sam9261: remove slow RC osc
  ARM: at91/dt: define sam9261ek slow crystal frequency
  ARM: at91/dt: sam9261: correctly define mainck
  ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values
  ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values
  misc: atmel_pwm: fix Kconfig symbols
  ARM: integrator: fix OF-related regression
  ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
  ARM: dts: kirkwood: fix phy-connection-type for Guruplug
  ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm
  ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc.
  ARM: dts: imx51-babbage: Fix esdhc setup
  ARM: dts: mx5: Move the display out of soc {} node
  ARM: dts: mx5: Fix IPU port node placement
  ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms
  ARM: mvebu: Fix broken SoC ID detection
  ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE
  ARM: multi_v7_defconfig: Add QCOM GSBI driver
  ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
  tty: serial: msm: Fix section mismatch warning
  ...
2014-06-25 12:19:01 -07:00
Arnd Bergmann 6c9d161788 First AT91 fixes batch for 3.16:
- drivers/misc fix for Kconfig PWM symbol
 - correction of several values in DT after conversion to CCF
 - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJTqvVyAAoJEAf03oE53VmQz+sH/2Di3RkT90URl9bGIiIgYh/S
 NYg8gpasHEdxMtiDGp6c7ie9EWpIK1ga1F0Iha0fwYEJE/WOmlqEQYhXuoJyxKpJ
 lJ2lfprj7Z19RjA717g+Q2LbAshTI1K3HhP2d56o97KkdmcIB76Re5DoGL14Ez6A
 TP0sCTCGWO+brjPPmzDY0la2HezjMKmOnxtdu4sbysHe6RT9b6JcEa1cFsT0nh4j
 DKdeyDO/kAp6sbkprkv7WCGpa+6fvsPEsnioO3IlYJx4ayT4Uq64YqS5skuzQK74
 7TdTSZoq0OM87t/zY2NR5MGSPoi48fP4Z2O+m/L9PVzROCK44eXBKe4lzOArxKQ=
 =D+rW
 -----END PGP SIGNATURE-----

Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes

Merge "First AT91 fixes batch for 3.16" from Nicolas Ferre:

- drivers/misc fix for Kconfig PWM symbol
- correction of several values in DT after conversion to CCF
- fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc

* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
  ARM: at91/dt: sam9261: remove slow RC osc
  ARM: at91/dt: define sam9261ek slow crystal frequency
  ARM: at91/dt: sam9261: correctly define mainck
  ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values
  ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values
  misc: atmel_pwm: fix Kconfig symbols
2014-06-25 20:27:15 +02:00
Nicolas Ferre 8dcd598c74 misc: atmel_pwm: fix Kconfig symbols
AT91 symbols AT91SAM9263, AT91SAM9RL, and AT91SAM9G45 do not exist and this
patch changes them to their correct ARCH_* version.
These symbols are chosen instead of the SOC_* ones because this driver is not
converted to DT.
Anyway, the ATMEL_PWM symbol and the associated driver will be removed soon,
during the move to the PWM sub-system.

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25 13:49:53 +02:00
Linus Torvalds 60761c1090 Char / Misc driver fixes for 3.16-rc2
Here are 3 patches, one a revert of the UIO patch you objected to in
 3.16-rc1 and that no one wanted to defend, a w1 driver bugfix, and a
 MAINTAINERS update for the vmware balloon driver.  All of these, except
 for the MAINTAINERS update which just got added, have been in linux-next just
 fine.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlOkkTEACgkQMUfUDdst+ynIKACgxyvwXygqwiKaNutDvwrP9l+e
 3joAn0gW1wVUq+7r/msb7sWosuNF9S2F
 =kc9k
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver fixes from Greg KH:
 "Here are 3 patches, one a revert of the UIO patch you objected to in
  3.16-rc1 and that no one wanted to defend, a w1 driver bugfix, and a
  MAINTAINERS update for the vmware balloon driver.

  All of these, except for the MAINTAINERS update which just got added,
  have been in linux-next just fine"

* tag 'char-misc-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  MAINTAINERS: add entry for VMware Balloon driver
  w1: mxc_w1: Fix incorrect "presence" status
  Revert "uio: fix vma io range check in mmap"
2014-06-21 06:43:19 -10:00
Dmitry Torokhov 73b35d07ee MAINTAINERS: add entry for VMware Balloon driver
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 11:47:33 -07:00
Dan Carpenter fc96e661a5 misc: vexpress: fix error handling vexpress_syscfg_regmap_init()
This function should be returning an ERR_PTR() on failure instead of
NULL.  Also there is a use after free bug if regmap_init() fails because
we free "func" and then dereference doing the return.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17 17:09:40 +02:00
Linus Torvalds 3de0ef8d0d Merge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull x86/UV changes from Ingo Molnar:
 "Continued updates for SGI UV 3 hardware support"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/UV: Fix conditional in gru_exit()
  x86/UV: Set n_lshift based on GAM_GR_CONFIG MMR for UV3
2014-06-03 15:48:23 -07:00
Linus Torvalds 4046136afb Char / misc driver patches for 3.16-rc1
Here is the big char / misc driver updates for 3.16-rc1.
 
 Lots of different driver updates for a variety of different drivers and
 minor driver subsystems.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlONWI8ACgkQMUfUDdst+ykvQACdGxTChdEU7edElDAXeelVmu8v
 D1UAoLDvqwUsN7t5v+WG2wkOvhf5MEA7
 =tVMP
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into next

Pull char/misc driver patches from Greg KH:
 "Here is the big char / misc driver update for 3.16-rc1.

  Lots of different driver updates for a variety of different drivers
  and minor driver subsystems.

  All have been in linux-next with no reported issues"

* tag 'char-misc-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (79 commits)
  hv: use correct order when freeing monitor_pages
  spmi: of: fixup generic SPMI devicetree binding example
  applicom: dereferencing NULL on error path
  misc: genwqe: fix uninitialized return value in genwqe_free_sync_sgl()
  miscdevice.h: Simple syntax fix to make pointers consistent.
  MAINTAINERS: Add miscdevice.h to file list for char/misc drivers.
  mcb: Add support for shared PCI IRQs
  drivers: Remove duplicate conditionally included subdirs
  misc: atmel_pwm: only build for supported platforms
  mei: me: move probe quirk to cfg structure
  mei: add per device configuration
  mei: me: read H_CSR after asserting reset
  mei: me: drop harmful wait optimization
  mei: me: fix hw ready reset flow
  mei: fix memory leak of mei_clients array
  uio: fix vma io range check in mmap
  drivers: uio_dmem_genirq: Fix memory leak in uio_dmem_genirq_probe()
  w1: do not unlock unheld list_mutex in __w1_remove_master_device()
  w1: optional bundling of netlink kernel replies
  connector: allow multiple messages to be sent in one packet
  ...
2014-06-03 08:06:56 -07:00
Linus Torvalds 0a58471541 ARM: SoC cleanups for 3.16
Cleanups for 3.16. Among these are:
 
 - A bunch of misc cleanups for Broadcom platforms, mostly housekeeping
 - Enabling Common Clock Framework on the older s3c24xx Samsung chipsets
 - Cleanup of the Versatile Express system controller code, moving it to syscon
 - Power management cleanups for OMAP platforms
 
 + a handful of other cleanups across the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjMwHAAoJEIwa5zzehBx3MjMP/iELgDsqbNE2wxF9Fb5EEnoe
 S11q1QIvVrMVdMcKFN5HfW7f+xNso6+4SwXW0cRrJokGvaqRE758WZWuZq0QBUeS
 RYMhfpqmI6pTTJUyy6i6OyXhuRqu8rQ1NPEAatYrKzmtwFX1H4t25f1YtZWhBcK8
 ONi45FHeH1OKGGpjpT63uhWEzLk+LZI2MtgxmWoFcemf7guX6vEPJVuVRi8eqLoS
 9vl1cAkweYgGhjvQFcSXENaguV50dZlLc9C41dJk9KVvJfRt7o+/cRbG5YpGvnp5
 Liu+OWM72w0BkgNk6wDN4kaPX5UGLF8QX11JlvDRCJ2FcPtM4NBG/C9TqLMfkKDR
 Ze+ITiXh6NjefdTZWJaM4vzsd6vFws8EYAP24IWFlZ451bNLVN1lzlgqluPNoKmj
 CAsFPZhY/x5X9a8VLZ72ohx3N17T/iMsOlbiWtnlfqDcL6N0IoLG1YkFFeQIKEAH
 mpobWus8Myq1miWqSaeXh5wOqUVQmYR0I8jNoTfte1nBYSaIGhtMixoQhM6Zw50C
 dgSh4p7qhrZUOnYmkPqFXr7NCJ9n3RD10Xu8d/3IIp0u9RJ5Kx6NCEg9adq22jZQ
 XGrr/vH0sM8MzpKmfTMi5t2Cx5kP2G+O3enq0hQi4x3Cb4o8vwWQlMgydTd+xBjj
 aLo3WTTw0h6nTuKkZL2p
 =wuX4
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC cleanups from Olof Johansson:
 "Cleanups for 3.16.  Among these are:

   - a bunch of misc cleanups for Broadcom platforms, mostly
     housekeeping
   - enabling Common Clock Framework on the older s3c24xx Samsung
     chipsets
   - cleanup of the Versatile Express system controller code, moving it
     to syscon
   - power management cleanups for OMAP platforms

  plus a handful of other cleanups across the place"

* tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
  ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM
  clk: samsung: fix build error
  ARM: vexpress: refine dependencies for new code
  clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata
  cpufreq: exynos: Fix the compile error
  ARM: S3C24XX: move debug-macro.S into the common space
  ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
  ARM: S3C24XX: trim down debug uart handling
  ARM: compressed/head.S: remove s3c24xx special case
  ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
  ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
  ARM: EXYNOS: Remove exynos_subsys registration
  ARM: EXYNOS: Remove duplicate lines in Makefile
  ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
  ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
  ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops
  ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it
  ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup
  ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit
  ARM: OMAP2+: PRCM: cleanup some header includes
  ...
2014-06-02 16:14:07 -07:00
Linus Torvalds 425553209b PCI changes for the v3.16 merge window:
Enumeration
     - Notify driver before and after device reset (Keith Busch)
     - Use reset notification in NVMe (Keith Busch)
 
   NUMA
     - Warn if we have to guess host bridge node information (Myron Stowe)
     - Work around AMD Fam15h BIOSes that fail to provide _PXM (Suravee Suthikulpanit)
     - Clean up and mark early_root_info_init() as deprecated (Suravee Suthikulpanit)
 
   Driver binding
     - Add "driver_override" for force specific binding (Alex Williamson)
     - Fail "new_id" addition for devices we already know about (Bandan Das)
 
   Resource management
     - Support BAR sizes up to 8GB (Nikhil Rao, Alan Cox)
     - Don't move IORESOURCE_PCI_FIXED resources (Bjorn Helgaas)
     - Mark SBx00 HPET BAR as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
     - Fail safely if we can't handle BARs larger than 4GB (Bjorn Helgaas)
     - Reject BAR above 4GB if dma_addr_t is too small (Bjorn Helgaas)
     - Don't convert BAR address to resource if dma_addr_t is too small (Bjorn Helgaas)
     - Don't set BAR to zero if dma_addr_t is too small (Bjorn Helgaas)
     - Don't print anything while decoding is disabled (Bjorn Helgaas)
     - Don't add disabled subtractive decode bus resources (Bjorn Helgaas)
     - Add resource allocation comments (Bjorn Helgaas)
     - Restrict 64-bit prefetchable bridge windows to 64-bit resources (Yinghai Lu)
     - Assign i82875p_edac PCI resources before adding device (Yinghai Lu)
 
   PCI device hotplug
     - Remove unnecessary "dev->bus" test (Bjorn Helgaas)
     - Use PCI_EXP_SLTCAP_PSN define (Bjorn Helgaas)
     - Fix rphahp endianess issues (Laurent Dufour)
     - Acknowledge spurious "cmd completed" event (Rajat Jain)
     - Allow hotplug service drivers to operate in polling mode (Rajat Jain)
     - Fix cpqphp possible NULL dereference (Rickard Strandqvist)
 
   MSI
     - Replace pci_enable_msi_block() by pci_enable_msi_exact() (Alexander Gordeev)
     - Replace pci_enable_msix() by pci_enable_msix_exact() (Alexander Gordeev)
     - Simplify populate_msi_sysfs() (Jan Beulich)
 
   Virtualization
     - Add Intel Patsburg (X79) root port ACS quirk (Alex Williamson)
     - Mark RTL8110SC INTx masking as broken (Alex Williamson)
 
   Generic host bridge driver
     - Add generic PCI host controller driver (Will Deacon)
 
   Freescale i.MX6
     - Use new clock names (Lucas Stach)
     - Drop old IRQ mapping (Lucas Stach)
     - Remove optional (and unused) IRQs (Lucas Stach)
     - Add support for MSI (Lucas Stach)
     - Fix imx6_add_pcie_port() section mismatch warning (Sachin Kamat)
 
   Renesas R-Car
     - Add gen2 device tree support (Ben Dooks)
     - Use new OF interrupt mapping when possible (Lucas Stach)
     - Add PCIe driver (Phil Edworthy)
     - Add PCIe MSI support (Phil Edworthy)
     - Add PCIe device tree bindings (Phil Edworthy)
 
   Samsung Exynos
     - Remove unnecessary OOM messages (Jingoo Han)
     - Fix add_pcie_port() section mismatch warning (Sachin Kamat)
 
   Synopsys DesignWare
     - Make MSI ISR shared IRQ aware (Lucas Stach)
 
   Miscellaneous
     - Check for broken config space aliasing (Alex Williamson)
     - Update email address (Ben Hutchings)
     - Fix Broadcom CNB20LE unintended sign extension (Bjorn Helgaas)
     - Fix incorrect vgaarb conditional in WARN_ON() (Bjorn Helgaas)
     - Remove unnecessary __ref annotations (Bjorn Helgaas)
     - Add arch/x86/kernel/quirks.c to MAINTAINERS PCI file patterns (Bjorn Helgaas)
     - Fix use of uninitialized MPS value (Bjorn Helgaas)
     - Tidy x86/gart messages (Bjorn Helgaas)
     - Fix return value from pci_user_{read,write}_config_*() (Gavin Shan)
     - Turn pcibios_penalize_isa_irq() into a weak function (Hanjun Guo)
     - Remove unused serial device IDs (Jean Delvare)
     - Use designated initialization in PCI_VDEVICE (Mark Rustad)
     - Fix powerpc NULL dereference in pci_root_buses traversal (Mike Qiu)
     - Configure MPS on ARM (Murali Karicheri)
     - Remove unnecessary includes of <linux/init.h> (Paul Gortmaker)
     - Move Open Firmware devspec attribute to PCI common code (Sebastian Ott)
     - Use pdev->dev.groups for attribute creation on s390 (Sebastian Ott)
     - Remove pcibios_add_platform_entries() (Sebastian Ott)
     - Add new ID for Intel GPU "spurious interrupt" quirk (Thomas Jarosch)
     - Rename pci_is_bridge() to pci_has_subordinate() (Yijing Wang)
     - Add and use new pci_is_bridge() interface (Yijing Wang)
     - Make pci_bus_add_device() void (Yijing Wang)
 
   DMA API
     - Clarify physical/bus address distinction in docs (Bjorn Helgaas)
     - Fix typos in docs (Emilio López)
     - Update dma_pool_create ()and dma_pool_alloc() descriptions (Gioh Kim)
     - Change dma_declare_coherent_memory() CPU address to phys_addr_t (Bjorn Helgaas)
     - Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory() (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjMaQAAoJEFmIoMA60/r8XncQAKX7cD6btXCZnrcYo7inseyp
 3rwOlrsNkWyHqSj/RqqzE1NY6L1h5G2uliI6xg1SKenuHPDcosm5d8FYO0ORKiUs
 xrqBkmZJHXN7fck//tJwsTXiYh5u42RO8QWbvZVr5UqXe40LyaMHMh9Y7VarrU/o
 sM2ADzFKagv1qMQ13nmYxqT+Zl+CqpimyLP+ep6Nfqxi6ils+KJ6b9SKYqrpqE6t
 Mcq2K5ShqU5SaYub1JIXLcQ9XylID+t1M9+cwixcs7a87HbJiktfkGqQvQJoUIuK
 Q5U+abcIGk4vfOnDCctSnoRyrcbTAZ/vqfo0vpX22TokESjwrD8hFOX5HPOFtD+4
 wIDbYurW/8oBhLRaJ0uTPzSH8bXjXTynAwxHZgIrEur5908eECKQ/WiFCxyrovvv
 r4ThAN0FaobllEr0XOFESOzDNSt/ME00WWI7+puAJ/KJkFEtcXt9othLmLmvLz8H
 2GWXrm/aOR0WUO7foGUxI3bXYlDN6NbSKpfuZsLAi2VAyJJ6L6yVSo/fT0X07e3z
 qRy9LOohuiwIKv/I4F2SEq2REfGGsnkrJBoeQi/oBZDcBy1Lsi7P9LWIERhLQEM+
 Hm+30lC/f326nI3hoyThj2k2xxZOQzCIvrt658xP4qd9Zfe1bvCH58FF8K62CoOd
 p8XAf7Sl6v6YUodUrT/t
 =km55
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into next

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
    - Notify driver before and after device reset (Keith Busch)
    - Use reset notification in NVMe (Keith Busch)

  NUMA
    - Warn if we have to guess host bridge node information (Myron Stowe)
    - Work around AMD Fam15h BIOSes that fail to provide _PXM (Suravee
      Suthikulpanit)
    - Clean up and mark early_root_info_init() as deprecated (Suravee
      Suthikulpanit)

  Driver binding
    - Add "driver_override" for force specific binding (Alex Williamson)
    - Fail "new_id" addition for devices we already know about (Bandan
      Das)

  Resource management
    - Support BAR sizes up to 8GB (Nikhil Rao, Alan Cox)
    - Don't move IORESOURCE_PCI_FIXED resources (Bjorn Helgaas)
    - Mark SBx00 HPET BAR as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
    - Fail safely if we can't handle BARs larger than 4GB (Bjorn Helgaas)
    - Reject BAR above 4GB if dma_addr_t is too small (Bjorn Helgaas)
    - Don't convert BAR address to resource if dma_addr_t is too small
      (Bjorn Helgaas)
    - Don't set BAR to zero if dma_addr_t is too small (Bjorn Helgaas)
    - Don't print anything while decoding is disabled (Bjorn Helgaas)
    - Don't add disabled subtractive decode bus resources (Bjorn Helgaas)
    - Add resource allocation comments (Bjorn Helgaas)
    - Restrict 64-bit prefetchable bridge windows to 64-bit resources
      (Yinghai Lu)
    - Assign i82875p_edac PCI resources before adding device (Yinghai Lu)

  PCI device hotplug
    - Remove unnecessary "dev->bus" test (Bjorn Helgaas)
    - Use PCI_EXP_SLTCAP_PSN define (Bjorn Helgaas)
    - Fix rphahp endianess issues (Laurent Dufour)
    - Acknowledge spurious "cmd completed" event (Rajat Jain)
    - Allow hotplug service drivers to operate in polling mode (Rajat Jain)
    - Fix cpqphp possible NULL dereference (Rickard Strandqvist)

  MSI
    - Replace pci_enable_msi_block() by pci_enable_msi_exact()
      (Alexander Gordeev)
    - Replace pci_enable_msix() by pci_enable_msix_exact() (Alexander Gordeev)
    - Simplify populate_msi_sysfs() (Jan Beulich)

  Virtualization
    - Add Intel Patsburg (X79) root port ACS quirk (Alex Williamson)
    - Mark RTL8110SC INTx masking as broken (Alex Williamson)

  Generic host bridge driver
    - Add generic PCI host controller driver (Will Deacon)

  Freescale i.MX6
    - Use new clock names (Lucas Stach)
    - Drop old IRQ mapping (Lucas Stach)
    - Remove optional (and unused) IRQs (Lucas Stach)
    - Add support for MSI (Lucas Stach)
    - Fix imx6_add_pcie_port() section mismatch warning (Sachin Kamat)

  Renesas R-Car
    - Add gen2 device tree support (Ben Dooks)
    - Use new OF interrupt mapping when possible (Lucas Stach)
    - Add PCIe driver (Phil Edworthy)
    - Add PCIe MSI support (Phil Edworthy)
    - Add PCIe device tree bindings (Phil Edworthy)

  Samsung Exynos
    - Remove unnecessary OOM messages (Jingoo Han)
    - Fix add_pcie_port() section mismatch warning (Sachin Kamat)

  Synopsys DesignWare
    - Make MSI ISR shared IRQ aware (Lucas Stach)

  Miscellaneous
    - Check for broken config space aliasing (Alex Williamson)
    - Update email address (Ben Hutchings)
    - Fix Broadcom CNB20LE unintended sign extension (Bjorn Helgaas)
    - Fix incorrect vgaarb conditional in WARN_ON() (Bjorn Helgaas)
    - Remove unnecessary __ref annotations (Bjorn Helgaas)
    - Add arch/x86/kernel/quirks.c to MAINTAINERS PCI file patterns
      (Bjorn Helgaas)
    - Fix use of uninitialized MPS value (Bjorn Helgaas)
    - Tidy x86/gart messages (Bjorn Helgaas)
    - Fix return value from pci_user_{read,write}_config_*() (Gavin Shan)
    - Turn pcibios_penalize_isa_irq() into a weak function (Hanjun Guo)
    - Remove unused serial device IDs (Jean Delvare)
    - Use designated initialization in PCI_VDEVICE (Mark Rustad)
    - Fix powerpc NULL dereference in pci_root_buses traversal (Mike Qiu)
    - Configure MPS on ARM (Murali Karicheri)
    - Remove unnecessary includes of <linux/init.h> (Paul Gortmaker)
    - Move Open Firmware devspec attribute to PCI common code (Sebastian Ott)
    - Use pdev->dev.groups for attribute creation on s390 (Sebastian Ott)
    - Remove pcibios_add_platform_entries() (Sebastian Ott)
    - Add new ID for Intel GPU "spurious interrupt" quirk (Thomas Jarosch)
    - Rename pci_is_bridge() to pci_has_subordinate() (Yijing Wang)
    - Add and use new pci_is_bridge() interface (Yijing Wang)
    - Make pci_bus_add_device() void (Yijing Wang)

  DMA API
    - Clarify physical/bus address distinction in docs (Bjorn Helgaas)
    - Fix typos in docs (Emilio López)
    - Update dma_pool_create ()and dma_pool_alloc() descriptions (Gioh Kim)
    - Change dma_declare_coherent_memory() CPU address to phys_addr_t
      (Bjorn Helgaas)
    - Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory()
      (Bjorn Helgaas)"

* tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
  MAINTAINERS: Add generic PCI host controller driver
  PCI: generic: Add generic PCI host controller driver
  PCI: imx6: Add support for MSI
  PCI: designware: Make MSI ISR shared IRQ aware
  PCI: imx6: Remove optional (and unused) IRQs
  PCI: imx6: Drop old IRQ mapping
  PCI: imx6: Use new clock names
  i82875p_edac: Assign PCI resources before adding device
  ARM/PCI: Call pcie_bus_configure_settings() to set MPS
  PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
  PCI: Make pci_bus_add_device() void
  PCI: exynos: Fix add_pcie_port() section mismatch warning
  PCI: Introduce new device binding path using pci_dev.driver_override
  PCI: rcar: Add gen2 device tree support
  PCI: cpqphp: Fix possible null pointer dereference
  PCI: rcar: Add R-Car PCIe device tree bindings
  PCI: rcar: Add MSI support for PCIe
  PCI: rcar: Add Renesas R-Car PCIe driver
  PCI: Fix return value from pci_user_{read,write}_config_*()
  PCI: exynos: Remove unnecessary OOM messages
  ...
2014-06-02 12:15:19 -07:00
Christian Engelmayer 63fa80cd58 misc: genwqe: fix uninitialized return value in genwqe_free_sync_sgl()
Function genwqe_free_sync_sgl() returns the value of variable 'rc'. 'rc' is
only set in the error paths, thus initialize it by 0. Coverity CID 1204242.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 17:43:12 -07:00
Arnd Bergmann 1690e35f9b misc: atmel_pwm: only build for supported platforms
There is architecture code in mach-at91 that depends on the
CONFIG_ATMEL_PWM symbol in order to call the soc-specific
at91_add_device_pwm function. While all of this is about code
that will be removed in the future, using DT probing and
the PWM framework, we currently get a build failure:

arch/arm/mach-at91/built-in.o: In function `at91_pwm_leds':
arch/arm/mach-at91/leds.c:88: undefined reference to `at91_add_device_pwm'

This patch ensures we only try to build this driver on
platforms on which it will build and work.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 14:24:34 -07:00
Tomas Winkler c919951d94 mei: me: move probe quirk to cfg structure
Move quirk FW type detector to cfg structure

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 14:16:38 -07:00
Alexander Usyskin 8d929d4862 mei: add per device configuration
Add mei_cfg structure that holds per device configuration
data and hooks, as the first step we add firmware
status register offsets

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 14:16:38 -07:00
Tomas Winkler c40765d919 mei: me: read H_CSR after asserting reset
According the spec the host should read H_CSR again
after asserting reset H_RST to ensure that reset was
read by the firmware

Cc: stable@vger.kernel.org
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 14:15:25 -07:00
Tomas Winkler 07cd7be3d9 mei: me: drop harmful wait optimization
It my take time till ME_RDY will be cleared after the reset,
so we cannot check the bit before we got the interrupt

Cc: stable@vger.kernel.org
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 14:15:25 -07:00
Tomas Winkler b04ada92ff mei: me: fix hw ready reset flow
We cleared H_RST for H_CSR on spurious interrupt generated when ME_RDY
while cleared and not while  ME_RDY is set. The spurious interrupt
is not delivered on all platforms in this case the
driver may fail to initialize.

Cc: stable@vger.kernel.org
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 14:15:25 -07:00
Tomas Winkler 84b3294a40 mei: fix memory leak of mei_clients array
we never freed the mei_clients array on driver shutdown
only on reset
add mei_hbm_reset function that wraps the hbm cleanup

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 14:15:25 -07:00
Jean Delvare fd1a73c60e misc: pch_phub: Fix Kconfig dependencies
The pch_phub driver is for a companion chip to the Intel Atom E600
series processors. These are 32-bit x86 processors so the driver is
only needed on X86_32. Add COMPILE_TEST as an alternative, so that the
driver can still be build-tested elsewhere.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 12:21:43 -07:00
Pawel Moll 974cc7b934 mfd: vexpress: Define the device as MFD cells
This patch - finally, after over 6 months! :-( - addresses
Samuel's request to split the vexpress-sysreg driver into
smaller portions and define the device in a form of MFD
cells:

* LEDs code has been completely removed and replaced with
  "gpio-leds" nodes in the tree (referencing dedicated
  GPIO subnodes in sysreg - bindings documentation updated);
  this also better fits the reality as some variants of the
  motherboard don't have all the LEDs populated

* syscfg bridge code has been extracted into a separate
  driver (placed in drivers/misc for no better place)

* all the ID & MISC registers are defined as sysconf
  making them available for other drivers should they need
  to use them (and also to the user via /sys/kernel/debug/regmap
  which can be helpful in platform debugging)

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15 17:02:19 +01:00
Rob Herring 4f0638100f misc: arm-charlcd: add DT probe support
Add the DT match table to enable DT based probe matching.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:26:25 -04:00
Sebastien Bourdelin 403007457d misc: (ds1682) replace obsolete simple_strtoull() with kstrtoull()
simple_strtoull() is obsolete, use the newer kstrtoull() instead.

Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:26:24 -04:00
Masanari Iida 32d9dbe379 misc: genwqe: Fix format string mismatch in card_debugfs.c
Fix two format string mismatch in genwqe_init_debugfs()

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:25:17 -04:00
Jean Delvare fc1a5dbe49 misc: Add hardware dependencies to Atmel drivers
According to the driver descriptions, the atmel_pwm and atmel-ssc
drivers are only useful on Atmel AT32 and AT91 systems. So add
hardware dependencies to these drivers to hide them on other systems.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:25:17 -04:00
Alexander Usyskin e4d8270e60 mei: set connecting state just upon connection request is sent to the fw
Adding power gating introduced new waiting state for client also during
connection attempt, a connection request can be queued for later either due
device is power gated or due to other on going connection.
We setting client connection state before start of full connect procedure so
in both cased the client state will be MEI_FILE_CONNECTING
which create interlock between the two connection attempts, both
detecting that another connection is in progress.

The interlock is resolved by moving client to connecting state
only upon connection request transmission, so the  first
cb in queue can be processed.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:21:56 -04:00
Alexander Usyskin 86113500c0 mei: make return values consistent across the driver
Follow-up for bits missed in
commit 7ca96aa278
mei: make return values consistent across the driver

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:21:23 -04:00
Alexander Usyskin 04dd366195 mei: extract fw status registers
Fetch FW status registers, as they are important in
in understanding of FW reset reasons

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:21:22 -04:00
Tomas Winkler 61a1aea7c7 mei: me: bump hbm version to 1.1 to support power gating
Communicate hbm version 1.1 to firmware to tell that we
now support power gating isolation protocol

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:25 -04:00
Alexander Usyskin d2d56faeba mei: txe: use runtime PG pm domain for non wakeable devices
For non wakeable devices we can't use pci runtime framework
as we are not able to wakeup from D3 states.
Instead we create new pg runtime domain that only drives TXE power
gating protocol to reduce the power consumption.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:25 -04:00
Tomas Winkler e13fa90ce4 mei: me: use runtime PG pm domain for non wakeable devices
For non wakeable devices we can't use pci runtime framework
as we are not able to wakeup from D3 states.
Instead we create new pg runtime domain that only drives ME power
gating protocol to reduce the power consumption.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:25 -04:00
Tomas Winkler 04bb139a07 mei: use runtime pm in write and read flow
Take rpm token on operation start to initiate rpm resume if needed.
Mark last busy time, release token and advice rpm framework
to try to autosuspend on operation end.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:24 -04:00
Alexander Usyskin cfe5ab8563 mei: txe: add runtime pm framework
Add runtime pm framework for TXE devices.
The runtime pm handlers are used to run
txe power gating isolation protocol.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:24 -04:00
Tomas Winkler 180ea05bce mei: me: add runtime pm framework
Add runtime pm framework for ME devices.
The runtime pm handlers are used to run
me power gating isolation protocol

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:24 -04:00
Tomas Winkler a532bbedc8 mei: add function to check write queues
The driver needs to check whether the write
queue idle before entering power gating

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:24 -04:00
Tomas Winkler ba9cdd0e1a mei: me: add pg exit and entry flow commands
For power gating entry we write hbm pg entry request command and
then we set pg register
For power gating exit we clear pg register and wait for exit request
hbm command.

Exit power gating request might also be initiated by the firmware
w/o explicit driver request

The power gating state is tracked by pg_state member of me_hw

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:24 -04:00
Tomas Winkler 964a2331e9 mei: expose hardware power gating state to mei layer
Since the runtime pm and the internal power gating
cannot be in complete sync in regards to I/O
operations, we need to expose the device
hardware internal power gating state to mei layer

2. We add pg_state handler that translate the hw
internal pg state to mei layer

2. We add power gating event variable to keep
power track of power gating transitions

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:24 -04:00
Tomas Winkler ee7e5afd2c mei: condition PGI support on HW and HBM version
Enable power gating isolation only if hw and fw support it.
This is indicated by ME_PGIC_HRA bit in ME_CSR_HA register
and on HBM protocol version.

The information is exported to MEI layer through
new pg_is_enabled hw op.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:23 -04:00
Tomas Winkler b16c35716b mei: me: add power gating isolation register write wrappers
Add entry and exit power gating isolation register
write handler.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:23 -04:00
Tomas Winkler ad4d355b4b mei: me: introduce power gating registers
LPT devices have internal power gating handled
through registers and hbm calls

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:23 -04:00
Tomas Winkler 4fcbc99b75 mei: implement power gating isolation hbm layer
Add send message functions and receive dispatch stubs
for power gating isolation hbm protocol.

The protocol consist of requests for entering and exiting
the power gating isolation state and their responses.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03 19:20:23 -04:00
Alexander Gordeev a30d0108b0 GenWQE: Use pci_enable_msi_exact() instead of pci_enable_msi_block()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers using these two
interfaces need to be updated to use the new pci_enable_msi_range()  or
pci_enable_msi_exact() and pci_enable_msix_range() or
pci_enable_msix_exact() interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-25 12:17:06 -06:00
Geert Uytterhoeven a82cb8b91a misc: Grammar s/addition/additional/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 12:28:47 -07:00
Alexander Usyskin 34ec43661f mei: ignore client writing state during cb completion
Ignore client writing state during cb completion to fix a memory
leak.

When moving cbs to the completion list we should not look at
writing_state as this state can be already overwritten by next
write, the fact that a cb is on the write waiting list means
that it was already written to the HW and we can safely complete it.

Same pays for wait in poll handler, we do not have to check the state
wake is done after completion list processing.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 12:24:16 -07:00
Tomas Winkler 5e6533a6f5 mei: me: do not load the driver if the FW doesn't support MEI interface
NM and SPS  FW types that may run on ME device on server platforms
do not have valid MEI/HECI interface and driver should not
be bound to it as this might lead to system hung.
In practice not all BIOSes effectively hide such devices from the
OS and in some cases it is not possible.

We determine FW type by examining Host FW status registers in order to
unbind the driver.
In this patch we are adding check for ME on Cougar Point, Lynx Point
Devices

Cc: stable <stable@vger.kernel.org> # 3.10+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 12:24:16 -07:00
Frank Haverkamp 73590a25ba GenWQE: Increase driver version number
Increase genwqe driver version number.

Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 12:12:39 -07:00
Frank Haverkamp 718f762efc GenWQE: Fix multithreading problems
When being used in a multithreaded application there were problems
with memory pages/cachelines accessed by multiple threads/cpus at the
same time, while doing DMA transfers to/from those. To avoid such
situations this fix is creating a copy of the first and the last page
if it is not fully used. The data is copied from user-space into those
pages and results are copied back when the DDCB-request is
successfully finished.

Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 12:12:39 -07:00
Colin Ian King ebb2c96bb9 GenWQE: Ensure rc is not returning an uninitialized value
rc is not initialized, so genwqe_finish_queue() either returns -EIO or
garbage.  Fortunately the return is not being checked by any callers,
so this has not yet caused any problems. Even so, it makes sense to
fix this small bug in case is is checked in future.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 12:12:39 -07:00
Frank Haverkamp 68fe8acc20 GenWQE: Add wmb before DDCB is started
Needed to add wmb() before we send the DDCB for execution.
Without the syncronizing it failed on System p.

Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 12:12:38 -07:00
Frank Haverkamp 5c5e058903 GenWQE: Enable access to VPD flash area
In addition to the two flash partitions we used so far, there is a 3rd
one which is enabled for usage by this fix.

Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 12:12:38 -07:00
Dan Carpenter b6a83d928c drivers/misc/sgi-gru/grukdump.c: cleanup gru_dump_context() a little
"ret" is zero here so we can remove the "!ret" part of the condition.
"uhdr" is alread a __user pointer so we can remove the cast.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:09 -07:00