Commit Graph

2892 Commits

Author SHA1 Message Date
Tejun Heo 1a112d10f0 libata: introduce ata_host->n_tags to avoid oops on SAS controllers
1871ee134b ("libata: support the ata host which implements a queue
depth less than 32") directly used ata_port->scsi_host->can_queue from
ata_qc_new() to determine the number of tags supported by the host;
unfortunately, SAS controllers doing SATA don't initialize ->scsi_host
leading to the following oops.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
 IP: [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0
 PGD 0
 Oops: 0002 [#1] SMP
 Modules linked in: isci libsas scsi_transport_sas mgag200 drm_kms_helper ttm
 CPU: 1 PID: 518 Comm: udevd Not tainted 3.16.0-rc6+ #62
 Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013
 task: ffff880c1a00b280 ti: ffff88061a000000 task.ti: ffff88061a000000
 RIP: 0010:[<ffffffff814e0618>]  [<ffffffff814e0618>] ata_qc_new_init+0x188/0x1b0
 RSP: 0018:ffff88061a003ae8  EFLAGS: 00010012
 RAX: 0000000000000001 RBX: ffff88000241ca80 RCX: 00000000000000fa
 RDX: 0000000000000020 RSI: 0000000000000020 RDI: ffff8806194aa298
 RBP: ffff88061a003ae8 R08: ffff8806194a8000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffff88000241ca80 R12: ffff88061ad58200
 R13: ffff8806194aa298 R14: ffffffff814e67a0 R15: ffff8806194a8000
 FS:  00007f3ad7fe3840(0000) GS:ffff880627620000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000058 CR3: 000000061a118000 CR4: 00000000001407e0
 Stack:
  ffff88061a003b20 ffffffff814e96e1 ffff88000241ca80 ffff88061ad58200
  ffff8800b6bf6000 ffff880c1c988000 ffff880619903850 ffff88061a003b68
  ffffffffa0056ce1 ffff88061a003b48 0000000013d6e6f8 ffff88000241ca80
 Call Trace:
  [<ffffffff814e96e1>] ata_sas_queuecmd+0xa1/0x430
  [<ffffffffa0056ce1>] sas_queuecommand+0x191/0x220 [libsas]
  [<ffffffff8149afee>] scsi_dispatch_cmd+0x10e/0x300
  [<ffffffff814a3bc5>] scsi_request_fn+0x2f5/0x550
  [<ffffffff81317613>] __blk_run_queue+0x33/0x40
  [<ffffffff8131781a>] queue_unplugged+0x2a/0x90
  [<ffffffff8131ceb4>] blk_flush_plug_list+0x1b4/0x210
  [<ffffffff8131d274>] blk_finish_plug+0x14/0x50
  [<ffffffff8117eaa8>] __do_page_cache_readahead+0x198/0x1f0
  [<ffffffff8117ee21>] force_page_cache_readahead+0x31/0x50
  [<ffffffff8117ee7e>] page_cache_sync_readahead+0x3e/0x50
  [<ffffffff81172ac6>] generic_file_read_iter+0x496/0x5a0
  [<ffffffff81219897>] blkdev_read_iter+0x37/0x40
  [<ffffffff811e307e>] new_sync_read+0x7e/0xb0
  [<ffffffff811e3734>] vfs_read+0x94/0x170
  [<ffffffff811e43c6>] SyS_read+0x46/0xb0
  [<ffffffff811e33d1>] ? SyS_lseek+0x91/0xb0
  [<ffffffff8171ee29>] system_call_fastpath+0x16/0x1b
 Code: 00 00 00 88 50 29 83 7f 08 01 19 d2 83 e2 f0 83 ea 50 88 50 34 c6 81 1d 02 00 00 40 c6 81 17 02 00 00 00 5d c3 66 0f 1f 44 00 00 <89> 14 25 58 00 00 00

Fix it by introducing ata_host->n_tags which is initialized to
ATA_MAX_QUEUE - 1 in ata_host_init() for SAS controllers and set to
scsi_host_template->can_queue in ata_host_register() for !SAS ones.
As SAS hosts are never registered, this will give them the same
ATA_MAX_QUEUE - 1 as before.  Note that we can't use
scsi_host->can_queue directly for SAS hosts anyway as they can go
higher than the libata maximum.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Reported-by: Jesse Brandeburg <jesse.brandeburg@gmail.com>
Reported-by: Peter Hurley <peter@hurleysoftware.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Fixes: 1871ee134b ("libata: support the ata host which implements a queue depth less than 32")
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
2014-07-23 10:30:34 -04:00
Romain Degez b32bfc06ae ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)
Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by
registering the board in the ahci_pci_tbl[].

Note: this HBA also provide a hardware RAID mode when activated in
BIOS but specific drivers from the manufacturer are required in this
case.

Signed-off-by: Romain Degez <romain.degez@gmail.com>
Tested-by: Romain Degez <romain.degez@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2014-07-18 18:00:50 -04:00
Andrey Utkin a2a9e02b5b drivers/ata/pata_ep93xx.c: use signed int type for result of platform_get_irq()
[linux-3.16-rc5/drivers/ata/pata_ep93xx.c:929]: (style) Checking if unsigned
variable 'irq' is less than zero.

Source code is

    irq = platform_get_irq(pdev, 0);
    if (irq < 0) {

but

    unsigned int irq;

$ fgrep platform_get_irq `find . -name \*.h -print`
./include/linux/platform_device.h:extern int platform_get_irq(struct
platform_device *, unsigned int);

Now using "int" type instead of "unsigned int" for "irq" variable.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80401
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-17 08:36:13 -04:00
Alexey Asemov eec7e1c16d libata: EH should handle AMNF error condition as a media error
libata-eh.c should handle AMNF error condition (error byte bit 0,
usually code 0x01) in libata-eh.c along with UNC as a media error so
SCSI stack can handle it properly (translation code 0x01 is already
present in libata-scsi.c) but was never passed down due to lack of
handling in EH.

While using linux-based machine (AMD 6550M-based notebook, PCI IDs for the
controller are 1022:7801 subsys 1025:059d) and ddrescue to salvage data
from failing hard drive (WD7500BPVT 2.5" 750G SATA2), I've found that pure
AMNF 0x01 error code generates generic "device error" that is retried
several times by SCSI stack instead of "media error" that is passed up to
software.

So we may assume deprecated AMNF error code is surely not dead yet, and
it's better for it to be handled properly. As we may see it is used by
modern enough devices, and used properly: drive returned AMNF only when IDs
for track cannot be read completely due to dying head or positioning,
otherwise it returned UNC(orrectables).

Not handling it causes wrong generic error code ("device error") reporting
down the stack, can damage failing drives further because of excessive
retries, and slows salvaging down a lot. Also, there is handling code in
libata-scsi.c for 0x01 AMNF error already.

https://bugzilla.kernel.org/show_bug.cgi?id=80031

tj: Shortened $SUBJ and moved its content to the first paragraph.

Signed-off-by: Alexey Asemov <alex@alex-at.ru>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-15 11:13:57 -04:00
Kevin Hao 1871ee134b libata: support the ata host which implements a queue depth less than 32
The sata on fsl mpc8315e is broken after the commit 8a4aeec8d2
("libata/ahci: accommodate tag ordered controllers"). The reason is
that the ata controller on this SoC only implement a queue depth of
16. When issuing the commands in tag order, all the commands in tag
16 ~ 31 are mapped to tag 0 unconditionally and then causes the sata
malfunction. It makes no senses to use a 32 queue in software while
the hardware has less queue depth. So consider the queue depth
implemented by the hardware when requesting a command tag.

Fixes: 8a4aeec8d2 ("libata/ahci: accommodate tag ordered controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-14 12:38:20 -04:00
Suman Tripathi 2a0bdff6b9 ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
This patch fixes the dma state machine lockup due to the processing
of IDENTIFY DEVICE PIO mode command. The X-Gene AHCI controller
has an errata in which it cannot clear the BSY bit after the PIO setup
FIS. The dma state machine enters CMFatalErrorUpdate state and locks
up. This patch also removes the dma restart workaround from the read_id
function as the read_id function is only called by libata layer for
ATA_INTERNAL commands. But for some cases eg: PORT MULTIPLIER
and udev, the framework will enumerate using SCSI commands and it will
not call read_id function.

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-08 11:46:05 -04:00
Suman Tripathi 39e0ee9964 libahci: export ahci_qc_issue() and ahci_start_fix_rx()
The subsequent patch will make use of them.

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-08 11:46:05 -04:00
Russell King f118ae5901 ata: ahci_imx: warn when disabling ahci link
When the AHCI link is disabled, it can't be re-enabled except by
resetting the entire SoC.  Rather than doing this silently print
some kernel messages to inform the user, along with how to avoid
this.

tj: Put a long printf format string on a single line.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-06-24 17:58:14 -04:00
Kefeng Wang 72cbaa3d2f ahci: disable ncq feature for hisilicon sata
NCQ feature is unsupported on hisilicon sata controller, so disable
it.  This version of IP is used by hip04 and hix5hd2 soc.

tj: "|=" was replaced with "=" for no reason.  Restored "|=".

Signed-off-by: Kefeng Wang <kefeng.wang@linaro.org>
Sigend-off-by: Tejun Heo <tj@kernel.org>
2014-06-24 16:54:23 -04:00
Shawn Guo e6dd42a917 ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]
Doing suspend/resume on imx6q and imx53 boards with no SATA disk
attached will trigger the following warning.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 661 at drivers/ata/libahci.c:224 ahci_enable_ahci+0x74/0x8)
Modules linked in:
CPU: 0 PID: 661 Comm: sh Tainted: G        W     3.15.0-rc5-next-20140521-000027
Backtrace:
[<80011c90>] (dump_backtrace) from [<80011e2c>] (show_stack+0x18/0x1c)
 r6:803a22f4 r5:00000000 r4:00000000 r3:00000000
[<80011e14>] (show_stack) from [<80661e60>] (dump_stack+0x88/0xa4)
[<80661dd8>] (dump_stack) from [<80028fdc>] (warn_slowpath_common+0x70/0x94)
 r5:00000009 r4:00000000
[<80028f6c>] (warn_slowpath_common) from [<80029024>] (warn_slowpath_null+0x24/)
 r8:808f68c4 r7:00000000 r6:00000000 r5:00000000 r4:e0810004
[<80029000>] (warn_slowpath_null) from [<803a22f4>] (ahci_enable_ahci+0x74/0x80)
[<803a2280>] (ahci_enable_ahci) from [<803a2324>] (ahci_reset_controller+0x24/0)
 r8:ddcd9410 r7:80351178 r6:ddcd9444 r5:dde8b850 r4:e0810000 r3:ddf35e90
[<803a2300>] (ahci_reset_controller) from [<803a2c68>] (ahci_platform_resume_ho)
 r7:80351178 r6:ddcd9444 r5:dde8b850 r4:ddcd9410
[<803a2c30>] (ahci_platform_resume_host) from [<803a38f0>] (imx_ahci_resume+0x2)
 r5:00000000 r4:ddcd9410
[<803a38c4>] (imx_ahci_resume) from [<803511ac>] (platform_pm_resume+0x34/0x54)
....

The reason is that the SATA controller has no working clock at this
point, and thus ahci_enable_ahci() fails to enable the controller.  In
case that there is no SATA disk attached, the imx_sata_disable() gets
called in ahci_imx_error_handler(), and both sata_clk and sata_ref_clk
will be disabled there.  Because all the imx_sata_enable() calls
afterward will return immediately due to imxpriv->no_device check, the
SATA controller working clock sata_clk will never get any chance to be
enabled again.

This is a regression caused by commit 90870d79d4 (ahci-imx: Port to
library-ised ahci_platform).  Before the commit, only sata_ref_clk is
managed by the driver in enable/disable function.  But after the commit,
all the clocks are enabled/disabled in a row by ahci platform helpers
ahci_platform_enable[disable]_clks.  Since ahb_clk is a bus clock which
does not have gate at all, and i.MX low-power hardware module already
manages sata_clk across suspend/resume cycle, the only clock that needs
to be managed by software is sata_ref_clk.

So instead of using ahci_platform_enable[disable]_clks to manage all
the clocks in a row from imx_sata_enable[disable], we should manage
only sata_ref_clk in there.

Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Fixes: 90870d79d4 (ahci-imx: Port to library-ised ahci_platform)
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-06-19 10:14:58 -04:00
Mikko Perttunen acbd573354 libahci_platform: Fail when PHY required but PHY support disabled
ahci_platform_get_resources handles resource management for
platform AHCI drivers, including getting a possible PHY
from the device tree. Since not all drivers need a PHY, it
ignores -ENODEV and -ENOSYS from devm_get_phy. However, when
the PHY subsystem is mistakenly disabled, -ENOSYS can be
returned even when a PHY is needed.

This patch modifies the -ENOSYS case to check if a "phys"
device tree node exists. If it exists, then clearly the PHY
subsystem is mistakenly disabled and the driver cannot work,
ahci_platform_get_resources will fail and propagate the error.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-06-17 12:10:59 -04:00
Linus Torvalds 6ea4fa70e4 Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
 "Nothing too interesting - another ahci platform driver variant,
  additional controller support, minor fixes and cleanups"

* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: Add Device ID for HighPoint RocketRaid 642L
  ata: ep93xx: use dmaengine_prep_slave_sg api instead of internal callback
  ahci: add PCI ID for Marvell 88SE91A0 SATA Controller
  sata_fsl: remove check for CONFIG_MPC8315_DS
  ahci: add support for Hisilicon sata
  libahci_platform: add host_flags parameter in ahci_platform_init_host()
  ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
  ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  Documentation: dt-bindings: reformat and order list of ahci-platform compatibles
  libata-sff: remove dead code
  ata: SATL compliance for Inquiry Product Revision
  pata_octeon_cf: use devm_kzalloc() to allocate cf_port
2014-06-09 14:58:36 -07:00
Jérôme Carretero d251836508 ahci: Add Device ID for HighPoint RocketRaid 642L
This device normally comes with a proprietary driver, using a web GUI
to configure RAID:
 http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
But thankfully it also works out of the box with the AHCI driver,
being just a Marvell 88SE9235.

Devices 640L, 644L, 644LS should also be supported but not tested here.

Signed-off-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2014-06-03 14:55:18 -04:00
Martin K. Petersen 3b8d2676d1 libata: Blacklist queued trim for Crucial M500
Queued trim only works for some users with MU05 firmware.  Revert to
blacklisting all firmware versions.

Introduced by commit d121f7d0cb ("libata: Update queued trim blacklist
for M5x0 drives") which this effectively reverts, while retaining the
blacklisting of M550.

See

    https://bugzilla.kernel.org/show_bug.cgi?id=71371

for reports of trouble with MU05 firmware.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-02 16:59:25 -07:00
Barry Song 69493e0b0a ata: ep93xx: use dmaengine_prep_slave_sg api instead of internal callback
it is better to use generic api instead of calling an internal callback
like channel->device->device_prep_slave_sg().

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-27 09:33:22 -04:00
Andreas Schrägle 754a292fe6 ahci: add PCI ID for Marvell 88SE91A0 SATA Controller
Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s
Controller by adding its PCI ID.

Signed-off-by: Andreas Schrägle <ajs124.ajs124@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2014-05-27 09:30:21 -04:00
Paul Bolle d0f5aa9cf6 sata_fsl: remove check for CONFIG_MPC8315_DS
A check for CONFIG_MPC8315_DS was added in v2.6.24. But the related
Kconfig symbol was never added to the tree. So the code behind this
check has effectively been dead for over six years. Remove it.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-21 15:36:22 -04:00
Linus Torvalds 6ab9028d00 Merge branch 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "Mostly device-specific fixes.  The only thing which isn't is the fix
  for zpodd oops-on-detach bug"

* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: imx: PLL clock needs 100us to settle down
  ata: pata_at91 only works on sam9
  libata: clean up ZPODD when a port is detached
  ahci: imx: software workaround for phy reset issue in resume
  ahci: imx: add namespace for register enums
  ahci: disable DEVSLP for Intel Valleyview
2014-05-21 18:35:42 +09:00
Shawn Guo 3685f25161 ahci: imx: PLL clock needs 100us to settle down
The commit e783c51 (ahci: imx: software workaround for phy reset issue
in resume) calls imx_sata_phy_reset() to reset phy immediately after
SATA MPLL is enabled.  It seems working fine mostly, but fails in some
case as below.

...
ahci-imx 2200000.sata: failed to reset phy: -110
ahci-imx: probe of 2200000.sata failed with error -110

After talking to the designer, we learnt that when enabling i.MX6Q SATA
MPLL, we need to wait 100us for it to settle down for safety.  Add this
required delay to fix above failure.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-19 16:06:50 -04:00
Kefeng Wang a1a205df6e ahci: add support for Hisilicon sata
The hip04 SoC of hisilicon has an AHCI compliant SATA controller,
and it is compliant with the ahci 1.3 and sata 3.0 specification.

There is a wrong bit in HOST_CAP of hip04 sata controller, which
enable unsupported feature of FBS, use AHCI_HFLAG_NO_FBS hflag to
disable it.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kefeng Wang <kefeng.wang@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-14 13:07:10 -04:00
Kefeng Wang f9f3691790 libahci_platform: add host_flags parameter in ahci_platform_init_host()
Add a dynamic host_flags argument to make ahci_platform_init_host more flexible,
then remove the AHCI_HFLAGS(...) argument from some driver's ata_port_info,
and pass that in as the new argument.

Cc: Hans de Geode <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kefeng Wang <kefeng.wang@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-14 13:07:10 -04:00
Kefeng Wang 888d91a08f ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
Append AHCI_HFLAG_NO_FBS to force turning off FBS flag.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Kefeng Wang <kefeng.wang@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-14 13:07:09 -04:00
Bartlomiej Zolnierkiewicz 58eb8cd565 ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
This patch fixes host drivers to use CONFIG_PM_SLEEP instead of CONFIG_PM
where applicable.  Benefits of this change:

* unused code is not being compiled in for CONFIG_PM=y, CONFIG_PM_SLEEP=n
  and CONFIG_PM_RUNTIME=y configurations

* easier transition to use struct dev_pm_ops and SIMPLE_DEV_PM_OPS() in
  the future

* more consistent code (there are host drivers which are using the correct
  CONFIG_PM_SLEEP checks already)

The patch leaves the core libata code and ->port_[suspend,resume] support
in sata_[inic162x,nv,sil24].c alone for now.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-09 22:37:49 -04:00
Arnd Bergmann 2af89a3cde ata: pata_at91 only works on sam9
The smc driver used by pata_at91 is at91sam9 specific, so building
this driver on another at91 platform results in this error:

ERROR: "sam9_smc_configure" [drivers/ata/pata_at91.ko] undefined!
ERROR: "sam9_smc_write_mode" [drivers/ata/pata_at91.ko] undefined!
ERROR: "sam9_smc_read_mode" [drivers/ata/pata_at91.ko] undefined!

This patch changes the Kconfig dependency to ensure it always works.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-08 11:00:00 -04:00
Levente Kurusa a6f9bf4d2f libata: clean up ZPODD when a port is detached
When a ZPODD device is unbound via sysfs, the ACPI notify handler
is not removed. This causes panics as observed in Bug #74601. The
panic only happens when the wake happens from outside the kernel
(i.e. inserting a media or pressing a button). Add a loop to
ata_port_detach which loops through the port's devices and checks
if zpodd is enabled, if so call zpodd_exit.

Cc: stable@vger.kernel.org
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Levente Kurusa <levex@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-07 09:17:03 -04:00
Thomas Petazzoni a3464ed2f1 ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
The Marvell Armada 380 SoC includes two AHCI compatible
interfaces. However, like all DMA-capable Marvell interface, they
require special handling to configure MBus windows. Therefore, this
commit adds a new ahci_mvebu driver, which relies on the
libahci_platform.c code recently introduced.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-04 15:28:59 -04:00
Shawn Guo e783c51cce ahci: imx: software workaround for phy reset issue in resume
When suspending imx6q systems which have rootfs on SATA, the following
error will likely be seen in resume.  The SATA link will fail to come
up, and it results in an unusable system across the suspend/resume
cycle.

$ echo mem > /sys/power/state
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
PM: Entering mem sleep
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 61.914 msecs
PM: suspend devices took 0.070 seconds
PM: late suspend of devices complete after 4.906 msecs
PM: noirq suspend of devices complete after 4.521 msecs
Disabling non-boot CPUs ...
CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
CPU1 is up
CPU2: Booted secondary processor
CPU2 is up
CPU3: Booted secondary processor
CPU3 is up
PM: noirq resume of devices complete after 10.486 msecs
PM: early resume of devices complete after 4.679 msecs
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 22.674 msecs
PM: resume devices took 0.030 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
$ ata1: SATA link down (SStatus 1 SControl 300)
ata1: SATA link down (SStatus 1 SControl 300)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: SATA link down (SStatus 1 SControl 310)
ata1.00: disabled
ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4
ata1: irq_stat 0x00000040, connection status changed
ata1: SError: { CommWake DevExch }
ata1: hard resetting link
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: killing request
sd 0:0:0:0: rejecting I/O to offline device
Aborting journal on device sda2-8.
sd 0:0:0:0: rejecting I/O to offline device
EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error writing to inode 132577 (offset 0 size 0 starting block 26235)
Buffer I/O error on device sda2, logical block 10169
...

It's caused by a silicon issue that SATA phy does not get reset by
controller when coming back from LPM.  The patch adds a software
workaround for this issue.  It enforces a software reset on SATA phy
in imx_sata_enable() function, so that we can ensure SATA link will
come up properly in both power-on and resume.

The software reset is implemented by writing phy reset register through
the phy control register bus interface.  Functions
imx_phy_reg_[addressing|write|read]() implement this bus interface, while
imx_sata_phy_reset() performs the actually reset operation.

Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-04 15:04:36 -04:00
Shawn Guo 24a9ad5b82 ahci: imx: add namespace for register enums
Update register enums a little bit to add proper namespace prefix, and
have the names match i.MX reference manual.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-04 15:04:35 -04:00
Paul Bolle 8612b4b4f9 libata-sff: remove dead code
Ever since v2.6.19 the code contains a check for CONFIG_NO_ATA_LEGACY.
But that macro has never been defined. Apparently no one ran into
problems on platforms that do not support compatibility mode. So remove
this code that has been dead for over seven years.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-04 15:01:42 -04:00
Keith Busch c49a6bf5ee ata: SATL compliance for Inquiry Product Revision
The SCSI-to-ATA Translation standard says to use data words 25 and 26
unless they are spaces. For devices that use these words in the firmware
field, they are generally more useful anyway.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-05-02 10:57:47 -04:00
Linus Torvalds fdd324aa5f Merge branch 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "Dan updated tag allocation to accomodate devices which choke when tags
  jump back and forth.  Quite a few ahci MSI related fixes.  A couple
  config dependency fixes and other misc fixes"

* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata/ahci: accommodate tag ordered controllers
  ahci: Do not receive interrupts sent by dummy ports
  ahci: Use pci_enable_msi_exact() instead of pci_enable_msi_range()
  ahci: Ensure "MSI Revert to Single Message" mode is not enforced
  ahci: do not request irq for dummy port
  pata_samsung_cf: fix ata_host_activate() failure handling
  pata_arasan_cf: fix ata_host_activate() failure handling
  ata: fix i.MX AHCI driver dependencies
  pata_at91: fix ata_host_activate() failure handling
  libata: Update queued trim blacklist for M5x0 drives
  libata: make AHCI_XGENE depend on PHY_XGENE
2014-04-24 09:57:02 -07:00
Jacob Pan 0cf4a7d6cf ahci: disable DEVSLP for Intel Valleyview
On Intel Valleyview SoC, SATA device sleep is not reliable. When
DEVSLP is attempted on certain SSDs, port_devslp write would fail
and result in malfunction of AHCI controller. AHCI controller may
be not shown in PCI enumeration after reset. Complete power source
removal may be required to recover from this failure. So we blacklist
this device and override host device reported capabilities such that
device LPM will only attempt slumber but not DEVSLP.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-24 10:26:26 -04:00
Dan Williams 8a4aeec8d2 libata/ahci: accommodate tag ordered controllers
The AHCI spec allows implementations to issue commands in tag order
rather than FIFO order:

	5.3.2.12 P:SelectCmd
	HBA sets pSlotLoc = (pSlotLoc + 1) mod (CAP.NCS + 1)
	or HBA selects the command to issue that has had the
	PxCI bit set to '1' longer than any other command
	pending to be issued.

The result is that commands posted sequentially (time-wise) may play out
of sequence when issued by hardware.

This behavior has likely been hidden by drives that arrange for commands
to complete in issue order.  However, it appears recent drives (two from
different vendors that we have found so far) inflict out-of-order
completions as a matter of course.  So, we need to take care to maintain
ordered submission, otherwise we risk triggering a drive to fall out of
sequential-io automation and back to random-io processing, which incurs
large latency and degrades throughput.

This issue was found in simple benchmarks where QD=2 seq-write
performance was 30-50% *greater* than QD=32 seq-write performance.

Tagging for -stable and making the change globally since it has a low
risk-to-reward ratio.  Also, word is that recent versions of an unnamed
OS also does it this way now.  So, drives in the field are already
experienced with this tag ordering scheme.

Cc: <stable@vger.kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ed Ciechanowski <ed.ciechanowski@intel.com>
Reviewed-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-18 15:56:03 -04:00
Alexander Gordeev 2cf532f5e6 ahci: Do not receive interrupts sent by dummy ports
In multiple MSI mode all AHCI ports (including dummy) get assigned
separate MSI vectors and (as result of execution
pci_enable_msi_exact() function) separate IRQ numbers, (mapped to the
MSI vectors).

Therefore, although interrupts from dummy ports are not desired they
are still enabled. We do not request IRQs for dummy ports, but that
only means we do not assign AHCI-specific ISRs to corresponding IRQ
numbers.

As result, dummy port interrupts still could come and traverse all the
way from the PCI device to the kernel, causing unnecessary overhead.

This update disables IRQs for dummy ports and prevents the described
issue.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: David Milburn <dmilburn@redhat.com>
Cc: linux-ide@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 5ca72c4f7c ("AHCI: Support multiple MSIs")
2014-04-18 15:55:57 -04:00
Alexander Gordeev ccf8f53cac ahci: Use pci_enable_msi_exact() instead of pci_enable_msi_range()
The driver calls pci_enable_msi_range() function with the range of
[nvec..nvec] which is what pci_enable_msi_exact() function is for.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-17 09:59:24 -04:00
Alexander Gordeev ab0f9e78b9 ahci: Ensure "MSI Revert to Single Message" mode is not enforced
The AHCI specification allows hardware to choose to revert to
single MSI mode when fewer messages are allocated than requested.
Yet, at least ICH10 chipset reverts to single MSI mode even when
enough messages are allocated in some cases (see below).

This update forces the driver to not rely on initialization of
multiple MSIs mode alone and always check if "MSI Revert to
Single Message" (MRSM) mode was enforced by the controller and
fallback to the single MSI mode in case it did.

That prevents a situation when the driver configured multiple
per-port IRQ handlers, but the controller sends all port's
interrupts to a single IRQ, which could easily screw up the
interrupt handling and lead to delays and possibly crashes.

The fix was tested on a 6-port controller that successfully
reverted to the single MSI mode:

00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA
AHCI Controller (prog-if 01 [AHCI 1.0])
	Subsystem: Super Micro Computer Inc Device 10a7
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 101
	I/O ports at f110 [size=8]
	I/O ports at f100 [size=4]
	I/O ports at f0f0 [size=8]
	I/O ports at f0e0 [size=4]
	I/O ports at f020 [size=32]
	Memory at fbf00000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
	Capabilities: [70] Power Management version 3
	Capabilities: [a8] SATA HBA v1.0
	Capabilities: [b0] PCI Advanced Features
	Kernel driver in use: ahci

With 6 ports just 8 MSI vectors should be enough, but the adapter
enforces the MRSM mode when less than 16 vectors are written to
the Multiple Messages Enable PCI register. I instigated MRSM mode
by forcing @nvec to 8 in ahci_init_interrupts().

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: linux-ide@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-17 09:58:48 -04:00
David Milburn 9ae794ac5e ahci: do not request irq for dummy port
System may crash in ahci_hw_interrupt() or ahci_thread_fn() when
accessing the interrupt status in a port's private_data if the port is
actually a DUMMY port.

00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller

<snip console output for linux-3.15-rc1>
[    9.352080] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
[    9.352084] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[    9.368155] Console: switching to colour frame buffer device 128x48
[    9.439759] mgag200 0000:11:00.0: fb0: mgadrmfb frame buffer device
[    9.446765] mgag200 0000:11:00.0: registered panic notifier
[    9.470166] scsi1 : ahci
[    9.479166] scsi2 : ahci
[    9.488172] scsi3 : ahci
[    9.497174] scsi4 : ahci
[    9.506175] scsi5 : ahci
[    9.515174] scsi6 : ahci
[    9.518181] ata1: SATA max UDMA/133 abar m2048@0x95c00000 port 0x95c00100 irq 91
[    9.526448] ata2: DUMMY
[    9.529182] ata3: DUMMY
[    9.531916] ata4: DUMMY
[    9.534650] ata5: DUMMY
[    9.537382] ata6: DUMMY
[    9.576196] [drm] Initialized mgag200 1.0.0 20110418 for 0000:11:00.0 on minor 0
[    9.845257] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    9.865161] ata1.00: ATAPI: Optiarc DVD RW AD-7580S, FX04, max UDMA/100
[    9.891407] ata1.00: configured for UDMA/100
[    9.900525] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7580S  FX04 PQ: 0 ANSI: 5
[   10.247399] iTCO_vendor_support: vendor-support=0
[   10.261572] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.269764] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[   10.301932] sd 0:2:0:0: [sda] 570310656 512-byte logical blocks: (291 GB/271 GiB)
[   10.317085] sd 0:2:0:0: [sda] Write Protect is off
[   10.328326] sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
[   10.375452] BUG: unable to handle kernel NULL pointer dereference at 000000000000003c
[   10.384217] IP: [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci]
[   10.392101] PGD 0
[   10.394353] Oops: 0000 [#1] SMP
[   10.397978] Modules linked in: sr_mod(+) cdrom sd_mod iTCO_wdt crc_t10dif iTCO_vendor_support crct10dif_common ahci libahci libata lpc_ich mfd_core mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm i2c_core megaraid_sas dm_mirror dm_region_hash
dm_log dm_mod
[   10.426499] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc1 #1
[   10.433495] Hardware name: QCI QSSC-S4R/QSSC-S4R, BIOS QSSC-S4R.QCI.01.00.S013.032920111005 03/29/2011
[   10.443886] task: ffffffff81906460 ti: ffffffff818f0000 task.ti: ffffffff818f0000
[   10.452239] RIP: 0010:[<ffffffffa0133df0>]  [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci]
[   10.462838] RSP: 0018:ffff880033c03d98  EFLAGS: 00010046
[   10.468767] RAX: 0000000000a400a4 RBX: ffff880029a6bc18 RCX: 00000000fffffffa
[   10.476731] RDX: 00000000000000a4 RSI: ffff880029bb0000 RDI: ffff880029a6bc18
[   10.484696] RBP: ffff880033c03dc8 R08: 0000000000000000 R09: ffff88002f800490
[   10.492661] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000000
[   10.500625] R13: ffff880029a6bd98 R14: 0000000000000000 R15: ffffc90000194000
[   10.508590] FS:  0000000000000000(0000) GS:ffff880033c00000(0000) knlGS:0000000000000000
[   10.517623] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   10.524035] CR2: 000000000000003c CR3: 00000000328ff000 CR4: 00000000000007b0
[   10.531999] Stack:
[   10.534241]  0000000000000017 ffff880031ba7d00 000000000000005c ffff880031ba7d00
[   10.542535]  0000000000000000 000000000000005c ffff880033c03e10 ffffffff810c2a1e
[   10.550827]  ffff880031ae2900 000000008108fb4f ffff880031ae2900 ffff880031ae2984
[   10.559121] Call Trace:
[   10.561849]  <IRQ>
[   10.563994]  [<ffffffff810c2a1e>] handle_irq_event_percpu+0x3e/0x1a0
[   10.571309]  [<ffffffff810c2bbd>] handle_irq_event+0x3d/0x60
[   10.577631]  [<ffffffff810c4fdd>] try_one_irq.isra.6+0x8d/0xf0
[   10.584142]  [<ffffffff810c5313>] note_interrupt+0x173/0x1f0
[   10.590460]  [<ffffffff810c2a8e>] handle_irq_event_percpu+0xae/0x1a0
[   10.597554]  [<ffffffff810c2bbd>] handle_irq_event+0x3d/0x60
[   10.603872]  [<ffffffff810c5727>] handle_edge_irq+0x77/0x130
[   10.610199]  [<ffffffff81014b8f>] handle_irq+0xbf/0x150
[   10.616040]  [<ffffffff8109ff4e>] ? vtime_account_idle+0xe/0x50
[   10.622654]  [<ffffffff815fca1a>] ? atomic_notifier_call_chain+0x1a/0x20
[   10.630140]  [<ffffffff816038cf>] do_IRQ+0x4f/0xf0
[   10.635490]  [<ffffffff815f8aed>] common_interrupt+0x6d/0x6d
[   10.641805]  <EOI>
[   10.643950]  [<ffffffff8149ca9f>] ? cpuidle_enter_state+0x4f/0xc0
[   10.650972]  [<ffffffff8149ca98>] ? cpuidle_enter_state+0x48/0xc0
[   10.657775]  [<ffffffff8149cb47>] cpuidle_enter+0x17/0x20
[   10.663807]  [<ffffffff810b0070>] cpu_startup_entry+0x2c0/0x3d0
[   10.670423]  [<ffffffff815dfcc7>] rest_init+0x77/0x80
[   10.676065]  [<ffffffff81a60f47>] start_kernel+0x40f/0x41a
[   10.682190]  [<ffffffff81a60941>] ? repair_env_string+0x5c/0x5c
[   10.688799]  [<ffffffff81a60120>] ? early_idt_handlers+0x120/0x120
[   10.695699]  [<ffffffff81a605ee>] x86_64_start_reservations+0x2a/0x2c
[   10.702889]  [<ffffffff81a60733>] x86_64_start_kernel+0x143/0x152
[   10.709689] Code: a0 fc ff 85 c0 8b 4d d4 74 c3 48 8b 7b 08 89 ca 48 c7 c6 60 66 13 a0 31 c0 e8 9d 70 28 e1 8b 4d d4 eb aa 0f 1f 84 00 00 00 00 00 <45> 8b 64 24 3c 48 89 df e8 23 47 4c e1 41 83 fc 01 19 c0 48 83
[   10.731470] RIP  [<ffffffffa0133df0>] ahci_hw_interrupt+0x100/0x130 [libahci]
[   10.739441]  RSP <ffff880033c03d98>
[   10.743333] CR2: 000000000000003c
[   10.747032] ---[ end trace b6e82636970e2690 ]---
[   10.760190] Kernel panic - not syncing: Fatal exception in interrupt
[   10.767291] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)

Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-of-by: David Milburn <dmilburn@redhat.com>
Fixes: 5ca72c4f7c ("AHCI: Support multiple MSIs")
2014-04-16 12:51:52 -04:00
Bartlomiej Zolnierkiewicz 3608aeff47 pata_samsung_cf: fix ata_host_activate() failure handling
Add missing clk_disable() call to ata_host_activate() failure path.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-15 08:48:56 -04:00
Bartlomiej Zolnierkiewicz 151eea367c pata_arasan_cf: fix ata_host_activate() failure handling
Add missing cf_exit() and clk_put() calls to ata_host_activate()
failure path.

Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-14 13:50:03 -04:00
Bartlomiej Zolnierkiewicz 7a56c0ba26 pata_octeon_cf: use devm_kzalloc() to allocate cf_port
As a nice side effect this fixes the cf_port leak on
dma_coerce_mask_and_coherent() or ata_host_activate()
failure.

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-14 13:33:28 -04:00
Jean Delvare f5f85ee065 ata: fix i.MX AHCI driver dependencies
The ahci_imx driver is only needed on Freescale i.MX platforms so
don't let it be built on other platforms, except for build test
purpose.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Richard Zhu <r65037@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-04-08 08:31:48 -04:00
Linus Torvalds 159d8133d0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual rocket science -- mostly documentation and comment updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  sparse: fix comment
  doc: fix double words
  isdn: capi: fix "CAPI_VERSION" comment
  doc: DocBook: Fix typos in xml and template file
  Bluetooth: add module name for btwilink
  driver core: unexport static function create_syslog_header
  mmc: core: typo fix in printk specifier
  ARM: spear: clean up editing mistake
  net-sysfs: fix comment typo 'CONFIG_SYFS'
  doc: Insert MODULE_ in module-signing macros
  Documentation: update URL to hfsplus Technote 1150
  gpio: update path to documentation
  ixgbe: Fix format string in ixgbe_fcoe.
  Kconfig: Remove useless "default N" lines
  user_namespace.c: Remove duplicated word in comment
  CREDITS: fix formatting
  treewide: Fix typo in Documentation/DocBook
  mm: Fix warning on make htmldocs caused by slab.c
  ata: ata-samsung_cf: cleanup in header file
  idr: remove unused prototype of idr_free()
2014-04-02 16:23:38 -07:00
Bartlomiej Zolnierkiewicz 27aa64b9d1 pata_at91: fix ata_host_activate() failure handling
Add missing clk_put() call to ata_host_activate() failure path.

Sergei says,

  "Hm, I have once fixed that (see that *if* (!ret)) but looks like a
   later commit 477c87e908 (ARM:
   at91/pata: use gpio_is_valid to check the gpio) broke it again. :-(
   Would be good if the changelog did mention that..."

Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2014-04-02 13:17:31 -04:00
Martin K. Petersen d121f7d0cb libata: Update queued trim blacklist for M5x0 drives
Crucial/Micron M500 drives properly support queued DSM TRIM starting
with firmware MU05. Update the blacklist so we only disable queued trim
for older firmware releases.

Early M550 series drives suffer from the same issue as M500. A bugfix
firmware is in the pipeline but not ready yet. Until then, blacklist
queued trim for M550.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Chris Samuel <chris@csamuel.org>
Cc: Marc MERLIN <marc@merlins.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2014-04-02 13:10:21 -04:00
Tejun Heo 74c03eb630 libata: make AHCI_XGENE depend on PHY_XGENE
AHCI_XGENE is only applicable on ARM64 but it can also be enabled for
compile testing; however, AHCI_XGENE selects PHY_XGENE which has other
arch specific dependencies.  This leads to the following warning when
enabling it on other archs for compile testing.

  warning: (AHCI_XGENE) selects PHY_XGENE which has unmet direct
  dependencies (HAS_IOMEM && OF && (ARM64 || COMPILE_TEST))

Selecting a config option which itself has dependencies can easily
lead to broken configurations.  For now, let's just make AHCI_XGENE
depend on PHY_XGENE which has all the necessary dependencies already.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Loc Ho <lho@apm.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
2014-04-02 12:42:45 -04:00
Linus Torvalds 4b1779c2cf PCI changes for the v3.15 merge window:
Enumeration
     - Increment max correctly in pci_scan_bridge() (Andreas Noever)
     - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
     - Assign CardBus bus number only during the second pass (Andreas Noever)
     - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
     - Make sure bus number resources stay within their parents bounds (Andreas Noever)
     - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
     - Check for child busses which use more bus numbers than allocated (Andreas Noever)
     - Don't scan random busses in pci_scan_bridge() (Andreas Noever)
     - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
     - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
     - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
     - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
     - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)
 
   NUMA
     - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
     - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
     - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
     - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
     - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
     - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
     - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
     - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)
 
   Resource management
     - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
     - Add resource_contains() (Bjorn Helgaas)
     - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
     - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
     - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
     - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
     - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
     - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
     - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
     - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
     - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
     - s390: Use generic pci_enable_resources() (Bjorn Helgaas)
     - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
     - Set type in __request_region() (Bjorn Helgaas)
     - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
     - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
     - Log IDE resource quirk in dmesg (Bjorn Helgaas)
     - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)
 
   PCI device hotplug
     - Make check_link_active() non-static (Rajat Jain)
     - Use link change notifications for hot-plug and removal (Rajat Jain)
     - Enable link state change notifications (Rajat Jain)
     - Don't disable the link permanently during removal (Rajat Jain)
     - Don't check adapter or latch status while disabling (Rajat Jain)
     - Disable link notification across slot reset (Rajat Jain)
     - Ensure very fast hotplug events are also processed (Rajat Jain)
     - Add hotplug_lock to serialize hotplug events (Rajat Jain)
     - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
     - Don't turn slot off when hot-added device already exists (Yijing Wang)
 
   MSI
     - Keep pci_enable_msi() documentation (Alexander Gordeev)
     - ahci: Fix broken single MSI fallback (Alexander Gordeev)
     - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
     - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
     - Fix leak of msi_attrs (Greg Kroah-Hartman)
     - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)
 
   Virtualization
     - Device-specific ACS support (Alex Williamson)
 
   Freescale i.MX6
     - Wait for retraining (Marek Vasut)
 
   Marvell MVEBU
     - Use Device ID and revision from underlying endpoint (Andrew Lunn)
     - Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
     - Call request_resource() on the apertures (Jason Gunthorpe)
     - Fix potential issue in range parsing (Jean-Jacques Hiblot)
 
   Renesas R-Car
     - Check platform_get_irq() return code (Ben Dooks)
     - Add error interrupt handling (Ben Dooks)
     - Fix bridge logic configuration accesses (Ben Dooks)
     - Register each instance independently (Magnus Damm)
     - Break out window size handling (Magnus Damm)
     - Make the Kconfig dependencies more generic (Magnus Damm)
 
   Synopsys DesignWare
     - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)
 
   Miscellaneous
     - Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
     - Enable INTx if BIOS left them disabled (Bjorn Helgaas)
     - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
     - Clean up par-arch object file list (Liviu Dudau)
     - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
     - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
     - Fix pci_bus_b() build failure (Paul Gortmaker)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTOdAZAAoJEFmIoMA60/r8VYUQALRrReyMBk3pjRt/fKIX4Kwi
 ydSo/YJeeKTN8K93fLw8bb8bdPItJScJFTfEa4Q2SpZezR/ecGXLowisy0BBaPHK
 qtOyB8EqjkLS17GfyecIe9Nd2SIAI2De/0bchK3kDtIX1YlZB/k/tD3eCPMHDnnl
 m8c5kAHKPQYd8g01I+S8nrtGHk/A33grfYpJXPZbcqyhE0lWU3SI8KDAGbcKzNHE
 23Do0yNyd4nHIdixWlhETcNvzHn35Q/O38JJwW9Mf1aI9gusYuml6GFefCgu/iov
 lxqp3CEW7iPZgQEgNbrQ0HzWn/durL2Trd6S/Yh6f2xbm1LGYKWh3LZUFLd3AQDd
 INEpUgKsyb//nF3dtiyGnZlp0QykoqFyLo2AEDrb+ILTd4up5DeRY/m1UpjAXR5p
 QicBmrDksHrSivPmMZwLx1DFQYKjQbdx5lOqy9hQM/Jmsr+N3/l7QBrbQWXks3JZ
 NNAyn4RZHQB7UDQS/MmVPArs+JK5qaEDQD57QuOTlqgP19VY9C9E/l/aEqefjdFo
 XOAm7CwGpB/iBAkIbE6ROEDiJArigRVHEfxLYeE/jtGOdRDCD1deWk+g3S8DWD7m
 ZxWSgIVB00PMAmomczdg59YVFBhocgwPUa8/cw6yqzx2QKP4mWXIFZ/Sjau5I3tn
 WWoxXlUirZfTJc29XnVy
 =3mNS
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
   - Increment max correctly in pci_scan_bridge() (Andreas Noever)
   - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
   - Assign CardBus bus number only during the second pass (Andreas Noever)
   - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
   - Make sure bus number resources stay within their parents bounds (Andreas Noever)
   - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
   - Check for child busses which use more bus numbers than allocated (Andreas Noever)
   - Don't scan random busses in pci_scan_bridge() (Andreas Noever)
   - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
   - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
   - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)

  NUMA
   - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
   - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
   - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
   - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)

  Resource management
   - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
   - Add resource_contains() (Bjorn Helgaas)
   - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
   - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
   - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
   - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
   - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
   - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
   - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
   - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
   - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
   - s390: Use generic pci_enable_resources() (Bjorn Helgaas)
   - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
   - Set type in __request_region() (Bjorn Helgaas)
   - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
   - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
   - Log IDE resource quirk in dmesg (Bjorn Helgaas)
   - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)

  PCI device hotplug
   - Make check_link_active() non-static (Rajat Jain)
   - Use link change notifications for hot-plug and removal (Rajat Jain)
   - Enable link state change notifications (Rajat Jain)
   - Don't disable the link permanently during removal (Rajat Jain)
   - Don't check adapter or latch status while disabling (Rajat Jain)
   - Disable link notification across slot reset (Rajat Jain)
   - Ensure very fast hotplug events are also processed (Rajat Jain)
   - Add hotplug_lock to serialize hotplug events (Rajat Jain)
   - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
   - Don't turn slot off when hot-added device already exists (Yijing Wang)

  MSI
   - Keep pci_enable_msi() documentation (Alexander Gordeev)
   - ahci: Fix broken single MSI fallback (Alexander Gordeev)
   - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
   - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
   - Fix leak of msi_attrs (Greg Kroah-Hartman)
   - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)

  Virtualization
   - Device-specific ACS support (Alex Williamson)

  Freescale i.MX6
   - Wait for retraining (Marek Vasut)

  Marvell MVEBU
   - Use Device ID and revision from underlying endpoint (Andrew Lunn)
   - Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
   - Call request_resource() on the apertures (Jason Gunthorpe)
   - Fix potential issue in range parsing (Jean-Jacques Hiblot)

  Renesas R-Car
   - Check platform_get_irq() return code (Ben Dooks)
   - Add error interrupt handling (Ben Dooks)
   - Fix bridge logic configuration accesses (Ben Dooks)
   - Register each instance independently (Magnus Damm)
   - Break out window size handling (Magnus Damm)
   - Make the Kconfig dependencies more generic (Magnus Damm)

  Synopsys DesignWare
   - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)

  Miscellaneous
   - Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
   - Enable INTx if BIOS left them disabled (Bjorn Helgaas)
   - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
   - Clean up par-arch object file list (Liviu Dudau)
   - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
   - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
   - Fix pci_bus_b() build failure (Paul Gortmaker)"

* tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  Revert "[PATCH] Insert GART region into resource map"
  PCI: Log IDE resource quirk in dmesg
  PCI: Change pci_bus_alloc_resource() type_mask to unsigned long
  PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region()
  resources: Set type in __request_region()
  PCI: Don't check resource_size() in pci_bus_alloc_resource()
  s390/PCI: Use generic pci_enable_resources()
  tile PCI RC: Use default pcibios_enable_device()
  sparc/PCI: Use default pcibios_enable_device() (Leon only)
  sh/PCI: Use default pcibios_enable_device()
  microblaze/PCI: Use default pcibios_enable_device()
  alpha/PCI: Use default pcibios_enable_device()
  PCI: Add "weak" generic pcibios_enable_device() implementation
  PCI: Don't enable decoding if BAR hasn't been assigned an address
  PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
  PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit
  PCI: Don't try to claim IORESOURCE_UNSET resources
  PCI: Check IORESOURCE_UNSET before updating BAR
  PCI: Don't clear IORESOURCE_UNSET when updating BAR
  PCI: Mark resources as IORESOURCE_UNSET if we can't assign them
  ...

Conflicts:
	arch/x86/include/asm/topology.h
	drivers/ata/ahci.c
2014-04-01 15:14:04 -07:00
Linus Torvalds 4dedde7c7a ACPI and power management updates for 3.15-rc1
- Device PM QoS support for latency tolerance constraints on systems with
    hardware interfaces allowing such constraints to be specified.  That is
    necessary to prevent hardware-driven power management from becoming
    overly aggressive on some systems and to prevent power management
    features leading to excessive latencies from being used in some cases.
 
  - Consolidation of the handling of ACPI hotplug notifications for device
    objects.  This causes all device hotplug notifications to go through
    the root notify handler (that was executed for all of them anyway
    before) that propagates them to individual subsystems, if necessary,
    by executing callbacks provided by those subsystems (those callbacks
    are associated with struct acpi_device objects during device
    enumeration).  As a result, the code in question becomes both smaller
    in size and more straightforward and all of those changes should not
    affect users.
 
  - ACPICA update, including fixes related to the handling of _PRT in cases
    when it is broken and the addition of "Windows 2013" to the list of
    supported "features" for _OSI (which is necessary to support systems
    that work incorrectly or don't even boot without it).  Changes from
    Bob Moore and Lv Zheng.
 
  - Consolidation of ACPI _OST handling from Jiang Liu.
 
  - ACPI battery and AC fixes allowing unusual system configurations to
    be handled by that code from Alexander Mezin.
 
  - New device IDs for the ACPI LPSS driver from Chiau Ee Chew.
 
  - ACPI fan and thermal optimizations related to system suspend and resume
    from Aaron Lu.
 
  - Cleanups related to ACPI video from Jean Delvare.
 
  - Assorted ACPI fixes and cleanups from Al Stone, Hanjun Guo, Lan Tianyu,
    Paul Bolle, Tomasz Nowicki.
 
  - Intel RAPL (Running Average Power Limits) driver cleanups from Jacob Pan.
 
  - intel_pstate fixes and cleanups from Dirk Brandewie.
 
  - cpufreq fixes related to system suspend/resume handling from Viresh Kumar.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Stratos Karafotis,
    Saravana Kannan, Rashika Kheria, Joe Perches.
 
  - cpufreq drivers updates from Viresh Kumar, Zhuoyu Zhang, Rob Herring.
 
  - cpuidle fixes related to the menu governor from Tuukka Tikkanen.
 
  - cpuidle fix related to coupled CPUs handling from Paul Burton.
 
  - Asynchronous execution of all device suspend and resume callbacks,
    except for ->prepare and ->complete, during system suspend and resume
    from Chuansheng Liu.
 
  - Delayed resuming of runtime-suspended devices during system suspend for
    the PCI bus type and ACPI PM domain.
 
  - New set of PM helper routines to allow device runtime PM callbacks to
    be used during system suspend and resume more easily from Ulf Hansson.
 
  - Assorted fixes and cleanups in the PM core from Geert Uytterhoeven,
    Prabhakar Lad, Philipp Zabel, Rashika Kheria, Sebastian Capella.
 
  - devfreq fix from Saravana Kannan.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTLgB1AAoJEILEb/54YlRxfs4P/35fIu9h8ClNWUPXqi3nlGIt
 yMyumKvF1VdsOKLbjTtFq6B3UOlhqDijYTCQd7Xt7X8ONTk/ND9ec2t/5xGkSdUI
 q46fa0qZXeqUn0Kt2t+kl6tgVQOkDj94aNlEh+7Ya3Uu6WYDDfmZtOBOFAMk6D8l
 ND4rHJpX+eUsRLBrcxaUxxdD8AW5guGcPKyeyzsXv1bY1BZnpLFrZ3PhuI5dn2CL
 L/zmk3A+wG6+ZlQxnwDdrKa3E6uhRSIDeF0vI4Byspa1wi5zXknJG2J7MoQ9JEE9
 VQpBXlqach5wgXqJ8PAqAeaB6Ie26/F7PYG8r446zKw/5UUtdNUx+0dkjQ7Mz8Tu
 ajuVxfwrrPhZeQqmVBxlH5Gg7Ez2KBKEfDxTdRnzI7FoA7PE5XDcg3kO64bhj8LJ
 yugnV/ToU9wMztZnPC7CoGPwUgxMJvr9LwmxS4aeKcVUBES05eg0vS3lwdZMgqkV
 iO0QkWTmhZ952qZCqZxbh0JqaaX8Wgx2kpX2tf1G2GJqLMZco289bLh6njNT+8CH
 EzdQKYYyn6G6+Qg2M0f/6So3qU17x9XtE4ZBWQdGDpqYOGZhjZAOs/VnB1Ysw/K3
 cDBzswlJd0CyyUps9B+qbf49OpbWVwl5kKeuHUuPxugEVryhpSp9AuG+tNil74Sj
 JuGTGR4fyFjDBX5cvAPm
 =ywR6
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "The majority of this material spent some time in linux-next, some of
  it even several weeks.  There are a few relatively fresh commits in
  it, but they are mostly fixes and simple cleanups.

  ACPI took the lead this time, both in terms of the number of commits
  and the number of modified lines of code, cpufreq follows and there
  are a few changes in the PM core and in cpuidle too.

  A new feature that already got some LWN.net's attention is the device
  PM QoS extension allowing latency tolerance requirements to be
  propagated from leaf devices to their ancestors with hardware
  interfaces for specifying latency tolerance.  That should help systems
  with hardware-driven power management to avoid going too far with it
  in cases when there are latency tolerance constraints.

  There also are some significant changes in the ACPI core related to
  the way in which hotplug notifications are handled.  They affect PCI
  hotplug (ACPIPHP) and the ACPI dock station code too.  The bottom line
  is that all those notification now go through the root notify handler
  and are propagated to the interested subsystems by means of callbacks
  instead of having to install a notify handler for each device object
  that we can potentially get hotplug notifications for.

  In addition to that ACPICA will now advertise "Windows 2013"
  compatibility for _OSI, because some systems out there don't work
  correctly if that is not done (some of them don't even boot).

  On the system suspend side of things, all of the device suspend and
  resume callbacks, except for ->prepare() and ->complete(), are now
  going to be executed asynchronously as that turns out to speed up
  system suspend and resume on some platforms quite significantly and we
  have a few more optimizations in that area.

  Apart from that, there are some new device IDs and fixes and cleanups
  all over.  In particular, the system suspend and resume handling by
  cpufreq should be improved and the cpuidle menu governor should be a
  bit more robust now.

  Specifics:

   - Device PM QoS support for latency tolerance constraints on systems
     with hardware interfaces allowing such constraints to be specified.
     That is necessary to prevent hardware-driven power management from
     becoming overly aggressive on some systems and to prevent power
     management features leading to excessive latencies from being used
     in some cases.

   - Consolidation of the handling of ACPI hotplug notifications for
     device objects.  This causes all device hotplug notifications to go
     through the root notify handler (that was executed for all of them
     anyway before) that propagates them to individual subsystems, if
     necessary, by executing callbacks provided by those subsystems
     (those callbacks are associated with struct acpi_device objects
     during device enumeration).  As a result, the code in question
     becomes both smaller in size and more straightforward and all of
     those changes should not affect users.

   - ACPICA update, including fixes related to the handling of _PRT in
     cases when it is broken and the addition of "Windows 2013" to the
     list of supported "features" for _OSI (which is necessary to
     support systems that work incorrectly or don't even boot without
     it).  Changes from Bob Moore and Lv Zheng.

   - Consolidation of ACPI _OST handling from Jiang Liu.

   - ACPI battery and AC fixes allowing unusual system configurations to
     be handled by that code from Alexander Mezin.

   - New device IDs for the ACPI LPSS driver from Chiau Ee Chew.

   - ACPI fan and thermal optimizations related to system suspend and
     resume from Aaron Lu.

   - Cleanups related to ACPI video from Jean Delvare.

   - Assorted ACPI fixes and cleanups from Al Stone, Hanjun Guo, Lan
     Tianyu, Paul Bolle, Tomasz Nowicki.

   - Intel RAPL (Running Average Power Limits) driver cleanups from
     Jacob Pan.

   - intel_pstate fixes and cleanups from Dirk Brandewie.

   - cpufreq fixes related to system suspend/resume handling from Viresh
     Kumar.

   - cpufreq core fixes and cleanups from Viresh Kumar, Stratos
     Karafotis, Saravana Kannan, Rashika Kheria, Joe Perches.

   - cpufreq drivers updates from Viresh Kumar, Zhuoyu Zhang, Rob
     Herring.

   - cpuidle fixes related to the menu governor from Tuukka Tikkanen.

   - cpuidle fix related to coupled CPUs handling from Paul Burton.

   - Asynchronous execution of all device suspend and resume callbacks,
     except for ->prepare and ->complete, during system suspend and
     resume from Chuansheng Liu.

   - Delayed resuming of runtime-suspended devices during system suspend
     for the PCI bus type and ACPI PM domain.

   - New set of PM helper routines to allow device runtime PM callbacks
     to be used during system suspend and resume more easily from Ulf
     Hansson.

   - Assorted fixes and cleanups in the PM core from Geert Uytterhoeven,
     Prabhakar Lad, Philipp Zabel, Rashika Kheria, Sebastian Capella.

   - devfreq fix from Saravana Kannan"

* tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
  PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs
  PM / sleep: Correct whitespace errors in <linux/pm.h>
  intel_pstate: Set core to min P state during core offline
  cpufreq: Add stop CPU callback to cpufreq_driver interface
  cpufreq: Remove unnecessary braces
  cpufreq: Fix checkpatch errors and warnings
  cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs
  MAINTAINERS: Reorder maintainer addresses for PM and ACPI
  PM / Runtime: Update runtime_idle() documentation for return value meaning
  video / output: Drop display output class support
  fujitsu-laptop: Drop unneeded include
  acer-wmi: Stop selecting VIDEO_OUTPUT_CONTROL
  ACPI / gpu / drm: Stop selecting VIDEO_OUTPUT_CONTROL
  ACPI / video: fix ACPI_VIDEO dependencies
  cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE}
  cpufreq: Do not allow ->setpolicy drivers to provide ->target
  cpufreq: arm_big_little: set 'physical_cluster' for each CPU
  cpufreq: arm_big_little: make vexpress driver depend on bL core driver
  ACPI / button: Add ACPI Button event via netlink routine
  ACPI: Remove duplicate definitions of PREFIX
  ...
2014-04-01 12:48:54 -07:00
Linus Torvalds 01d5f3b598 Merge branch 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
 "A lot of activities on libata side this time.

   - A lot of changes around ahci.  Various embedded platforms are
     implementing ahci controllers.  Some were built atop ahci_platform,
     others were doing their own things.  Hans made some structural
     changes to libahci and librarized ahci_platform so that ahci
     platform drivers can share more common code.  A couple platform
     drivers are added on top of that and several are added to replace
     older drivers which were doing their own things (older ones are
     scheduled to be removed).

   - Dan finishes the patchset to make libata PM operations
     asynchronous.  Combined with one patch being routed through scsi,
     this should speed resume measurably.

   - Various fixes and cleanups from Bartlomiej and others"

* 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (61 commits)
  ata: fix Marvell SATA driver dependencies
  ata: fix ARASAN CompactFlash PATA driver dependencies
  ata: remove superfluous casts
  ata: sata_highbank: remove superfluous cast
  ata: fix Calxeda Highbank SATA driver dependencies
  ata: fix R-Car SATA driver dependencies
  ARM: davinci: da850: update SATA AHCI support
  ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  ata: move library code from ahci_platform.c to libahci_platform.c
  ata: ahci_platform: fix ahci_platform_data->suspend method handling
  libata: remove unused ata_sas_port_async_resume() stub
  libata.h: add stub for ata_sas_port_resume
  libata: async resume
  libata, libsas: kill pm_result and related cleanup
  ata: Fix compiler warning with APM X-Gene host controller driver
  arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
  ata: Add APM X-Gene SoC AHCI SATA host controller driver
  Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding
  arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
  ata: ahci_sunxi: fix code formatting
  ...
2014-03-31 15:27:37 -07:00
Bartlomiej Zolnierkiewicz 03803ef66d ata: fix Marvell SATA driver dependencies
Make sata_mv host driver depend on PCI || ARCH_DOVE || ARCH_KIRKWOOD ||
ARCH_MV78XX0 || ARCH_MVEBU || ARCH_ORION5X config options as Marvell
SATA support covers both Marvell PCI devices and Marvell Dove, Kirkwood,
MV78xx0, Armada 370/XP and Orion5x SoCs (for non-PCI devices the driver
to work requires suitable device tree node or platform device to be
defined).  Additionally allow the driver build if COMPILE_TEST config
option is set.

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-27 10:50:33 -04:00
Bartlomiej Zolnierkiewicz e638433b50 ata: fix ARASAN CompactFlash PATA driver dependencies
Make pata_arasan_cf host driver depend on ARCH_SPEAR13XX config
option as ARASAN CompactFlash PATA support is specific to ST
SPEAr13xx SoCs and the driver to work requires suitable device
tree node (or platform device) to be defined.  Additionally
allow the driver build if COMPILE_TEST config option is set.

Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-26 12:49:26 -04:00