Commit Graph

426 Commits

Author SHA1 Message Date
Linus Torvalds ca9ba4471c Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3388/1: ixp23xx: add core ixp23xx support
  [ARM] 3417/1: add support for logicpd pxa270 card engine
  [ARM] 3387/1: ixp23xx: add defconfig
  [ARM] 3377/2: add support for intel xsc3 core
  [ARM] Move ice-dcc code into misc.c
  [ARM] Fix decompressor serial IO to give CRLF not LFCR
  [ARM] proc-v6: mark page table walks outer-cacheable, shared.  Enable NX.
  [ARM] nommu: trivial patch for arch/arm/lib/Makefile
  [ARM] 3416/1: Update LART site URL
  [ARM] 3415/1: Akita: Add missing EXPORT_SYMBOL
  [ARM] 3414/1: ep93xx: reset ethernet controller before uncompressing
2006-03-28 13:53:03 -08:00
Lennert Buytenhek c471307437 [ARM] 3388/1: ixp23xx: add core ixp23xx support
Patch from Lennert Buytenhek

This patch adds support for the Intel ixp23xx series of CPUs.  The
ixp23xx is an XSC3 based CPU with 512K of L2 cache, a 64bit 66MHz PCI
interface, two DDR RAM interfaces, QDR RAM interfaces, two gigabit
MACs, two 10/100 MACs, expansion bus, four microengines, a Media and
Switch Fabric unit almost identical to the one on the ixp2400, two
xscale (8250ish) UARTs and a bunch of other stuff.

This patch adds the core ixp23xx support code, and support for the
ADI Engineering Roadrunner, Intel IXDP2351, and IP Fabrics Double
Espresso platforms.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28 21:18:54 +01:00
Lennert Buytenhek e9937d4b0a [ARM] 3417/1: add support for logicpd pxa270 card engine
Patch from Lennert Buytenhek

Add support for the LogicPD PXA270 Card Engine.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28 21:08:13 +01:00
Lennert Buytenhek 23bdf86aa0 [ARM] 3377/2: add support for intel xsc3 core
Patch from Lennert Buytenhek

This patch adds support for the new XScale v3 core.  This is an
ARMv5 ISA core with the following additions:

- L2 cache
- I/O coherency support (on select chipsets)
- Low-Locality Reference cache attributes (replaces mini-cache)
- Supersections (v6 compatible)
- 36-bit addressing (v6 compatible)
- Single instruction cache line clean/invalidate
- LRU cache replacement (vs round-robin)

I attempted to merge the XSC3 support into proc-xscale.S, but XSC3
cores have separate errata and have to handle things like L2, so it
is simpler to keep it separate.

L2 cache support is currently a build option because the L2 enable
bit must be set before we enable the MMU and there is no easy way to
capture command line parameters at this point.

There are still optimizations that can be done such as using LLR for
copypage (in theory using the exisiting mini-cache code) but those
can be addressed down the road.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28 21:00:40 +01:00
Russell King a081568d70 [ARM] Fix decompressor serial IO to give CRLF not LFCR
As per the corresponding change to the serial drivers, arrange
for ARM decompressors to give CRLF.  Move the common putstr code
into misc.c such that machines only need to supply "putc" and
"flush" functions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28 10:24:33 +01:00
Alessandro Zummo 12b824fb15 [PATCH] RTC subsystem: ARM cleanup
This patch removes from the ARM subsytem some of the rtc-related functions
that have been included in the RTC subsystem.  It also fixes some naming
collisions.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:50 -08:00
KAMEZAWA Hiroyuki 7eb98a2f3b [PATCH] unify pfn_to_page: arm pfn_to_page
ARM can use generic funcs.
PFN_TO_NID, LOCAL_MAP_NR are defined by sub-archs.

Signed-off-by: KAMEZAWA Hirotuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:44 -08:00
Lennert Buytenhek c9b4470e2d [ARM] 3414/1: ep93xx: reset ethernet controller before uncompressing
Patch from Lennert Buytenhek

The Redboot version that cirrus supplies for the cirrus ep93xx doesn't
turn off DMA from the ethernet MAC before jumping to linux, which means
that we might end up with bits of RX status and packet data scribbled
over the uncompressed kernel image.

Work around this by resetting the ethernet MAC before we uncompress.

We don't usually work around bootloader bugs, but considering that the
large majority of ep93xx boards out there have this problem, I figured
this it was justified in this case.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-26 21:40:27 +01:00
Akinobu Mita b89c3b165f [PATCH] bitops: arm: use generic bitops
- remove __{,test_and_}{set,clear,change}_bit() and test_bit()

- if __LINUX_ARM_ARCH__ < 5

  - remove ffz()
  - remove __ffs()
  - remove generic_fls()
  - remove generic_ffs()

- remove generic_fls64()
- remove sched_find_first_bit()
- remove generic_hweight{32,16,8}()

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:12 -08:00
Akinobu Mita 9363513366 [PATCH] arm: fix undefined reference to generic_fls
This patch defines constant_fls() instead of removed generic_fls().

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:09 -08:00
Linus Torvalds a41622eaa9 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3030/2: fix permission check in the obscur cmpxchg syscall
  [ARM] nommu: rename compressed/head.S symbols to a new style
  [ARM] select TLS_REG_EMUL and NEEDS_SYSCALL_FOR_CMPXCHG
  [ARM] nommu: Move hardware page table definitions to pgtable-hwdef.h
  [ARM] Move read of processor ID out of lookup_processor_type()
  [ARM] Fix typo in tlbflush.h
  [ARM] noMMU: removes TLB codes in nommu mode
  [ARM] noMMU: block sys_fork in nommu mode
  [ARM] 3399/1: Fix link problem when CONFIG_PRINTK is disabled
  [ARM] 3398/1: Fix the VFP registers loading/storing base address
  [ARM] 3397/1: AT91RM9200 Header update
  [ARM] 3385/1: Battery support for sharp zaurus sl-5500 (collie)
  [ARM] SMP: don't set cpu_*_map in smp_prepare_boot_cpu
  include/linux/clk.h is betraying its ARM origins
  [ARM] Move enable_irq and disable_irq to assembler.h
  [ARM] 3391/1: use PLAT8250_DEV_PLATFORM{,1} for platform device id instead of 0/1
2006-03-25 20:29:54 -08:00
Russell King 0003cedfc5 Merge nommu tree
Fix merge conflict in arch/arm/mm/proc-xscale.S

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25 22:08:55 +00:00
Andrew Victor 1310eda4be [ARM] 3397/1: AT91RM9200 Header update
Patch from Andrew Victor

This patch updates the hardware header to include definitions for the
Memory Controller registers.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25 21:57:59 +00:00
Davide Libenzi f348d70a32 [PATCH] POLLRDHUP/EPOLLRDHUP handling for half-closed devices notifications
Implement the half-closed devices notifiation, by adding a new POLLRDHUP
(and its alias EPOLLRDHUP) bit to the existing poll/select sets.  Since the
existing POLLHUP handling, that does not report correctly half-closed
devices, was feared to be changed, this implementation leaves the current
POLLHUP reporting unchanged and simply add a new bit that is set in the few
places where it makes sense.  The same thing was discussed and conceptually
agreed quite some time ago:

http://lkml.org/lkml/2003/7/12/116

Since this new event bit is added to the existing Linux poll infrastruture,
even the existing poll/select system calls will be able to use it.  As far
as the existing POLLHUP handling, the patch leaves it as is.  The
pollrdhup-2.6.16.rc5-0.10.diff defines the POLLRDHUP for all the existing
archs and sets the bit in the six relevant files.  The other attached diff
is the simple change required to sys/epoll.h to add the EPOLLRDHUP
definition.

There is "a stupid program" to test POLLRDHUP delivery here:

 http://www.xmailserver.org/pollrdhup-test.c

It tests poll(2), but since the delivery is same epoll(2) will work equally.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:56 -08:00
Andrew Victor d4b7780ea1 [PATCH] AT91RM9200 Ethernet driver
This patch adds support for the Ethernet controller integrated in the
Atmel AT91RM9200 SoC processor.

Changes since the previous submission (01/02/2006) are:
  - Make use of the clk.h clock infrastructure.
  - The multicast hash function is not crc32. [Patch by Pedro Perez]

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 12:10:55 -05:00
Al Viro 57f3ebccaa [PATCH] remove ISA legacy functions: remove the helpers
unused isa_...() helpers removed.

Adrian Bunk:
The asm-sh part was rediffed due to unrelated changes.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:19 -08:00
Russell King 9c42954dfd [ARM] Move enable_irq and disable_irq to assembler.h
5d25ac038a broke VFP builds due to
enable_irq not being defined as an assembly macro.  Move it to
assembler.h so everyone can use it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-23 16:59:37 +00:00
Linus Torvalds 591eb85ecd Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
  [ARM] 3389/1: typo and grammar fix
  [ARM] 3386/1: AT91RM9200 Clock update
  [ARM] 3384/1: AT91RM9200: Timer
  [ARM] 3382/1: ixp2000: unify defconfigs
  [ARM] 3381/1: ixp2000: fix slowport write timing control register fields
  [ARM] 3380/1: ixp2000: simplify ixdp2x00_master_npu() check
  [ARM] 3379/1: ixp2000: use generic 8250 debug macros
  [ARM] 3378/1: ixp2000: fix gpio interrupt handling
  [ARM] Quieten spurious IRQ detection
  [ARM] Use kcalloc to allocate counter_config array rather than kmalloc
  [ARM] Oprofile: dynamically allocate counter_config
  [ARM] Oprofile: Convert semaphore to mutex
  [ARM] 3376/2: S3C2410 - update defconfig
  [ARM] 3375/1: S3C2440 - fix osiris machine build
  [ARM] 3374/1: ep93xx: gpio interrupt support
  [ARM] 3361/1: S3C24XX - add USB bus clock source
  [ARM] 3360/1: S3C2440 - add set rate methods and camera clock
  [ARM] 3359/1: S3C24XX - add support for clk_set_rate
  [ARM] Convert kmalloc+memset to kzalloc
  [ARM] 3373/1: move uengine loader to arch/arm/common
  ...
2006-03-22 17:32:09 -08:00
Lennert Buytenhek a04f2d9d3a [ARM] 3381/1: ixp2000: fix slowport write timing control register fields
Patch from Lennert Buytenhek

The original version of the chip docs had the PW and SU fields in
the slowport write timing control register accidentally reversed.
This is mentioned in the errata (documentation change #4) and fixed
in newer docs.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22 20:14:11 +00:00
Lennert Buytenhek 709eb502eb [ARM] 3380/1: ixp2000: simplify ixdp2x00_master_npu() check
Patch from Lennert Buytenhek

On the IXDP2x00s, the NPU that is PCI master is always the egress
(i.e. 'master') NPU.  At least on the IXDP2800, both NPUs have flash,
so the ixp2000_has_flash() check in ixdp2x00_master_npu() is useless.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22 20:14:11 +00:00
Lennert Buytenhek e99053e075 [ARM] 3379/1: ixp2000: use generic 8250 debug macros
Patch from Lennert Buytenhek

The xscale UART in the ixp2000 is basically just an 8250 UART (with
some extra bits and pieces), so we can use the generic 8250 debug
macros on the ixp2000.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22 20:14:09 +00:00
Russell King bec1b81936 [ARM] Quieten spurious IRQ detection
Only issue a "nobody cared" warning after 99900 spurious interrupts.
This avoids the occasional spurious interrupt causing warnings, as
per x86.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22 10:22:58 +00:00
Jaroslav Kysela 5501972e0b Merge with rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2006-03-22 11:02:08 +01:00
Takashi Iwai f7cbb7fcd3 [ALSA] Fix snd_xxx_t typedefs
Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver

Replace snd_xxx_t typedefs with explicit structs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22 10:23:39 +01:00
Lennert Buytenhek bd20ff5793 [ARM] 3374/1: ep93xx: gpio interrupt support
Patch from Lennert Buytenhek

Add GPIO interrupt support for the first 16 GPIO lines (port A
and B.)

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:21 +00:00
Lennert Buytenhek 18ec5c7312 [ARM] 3373/1: move uengine loader to arch/arm/common
Patch from Lennert Buytenhek

Move the uengine loader from arch/arm/mach-ixp2000 to arch/arm/common
so that ixp23xx can use it too.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:16 +00:00
Lennert Buytenhek a8e19667a4 [ARM] 3371/1: ep93xx: gpio support
Patch from Lennert Buytenhek

Add support for setting the direction of and getting/setting the
value of the 64 GPIO lines.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:12 +00:00
Lennert Buytenhek e7736d47a1 [ARM] 3369/1: ep93xx: add core cirrus ep93xx support
Patch from Lennert Buytenhek

This patch adds support for the Cirrus ep93xx series of CPUs.  The
ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs,
IrDA, MaverickCrunch floating point coprocessor, between 24 and 64
GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster
engine, graphics accelerator, IDE controller and a bunch of other
stuff.

This patch adds the core ep93xx support code, and support for the
Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:11 +00:00
Alessandro Zummo 03bd14c4b7 [ARM] 3349/1: ixp4xx exp bus defines
Patch from Alessandro Zummo

This patch adds a few defines that are useful
to configure the CS regions on ixp4xx.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: OEyvind Repvik <oyvind@repvik.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:08 +00:00
Peter Teichmann 6d4518d76f [ARM] 3346/1: Fix udelay() for HZ values different from 100
Patch from Peter Teichmann

Currently, if the kernels HZ value is greater than 100, delays with the udelay function are too short. This can cause trouble for instance with the zd1201 usb wlan driver.

This patch suggests a solution that keeps the overhead small and maintains (hopefully) sufficient resolution.

Signed-off-by: Peter Teichmann
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:07 +00:00
Deepak Saxena 0328ad23cf [ARM] 3334/1: Add support for IXDP28x5 platforms
Patch from Deepak Saxena

This patch adds support for Intel's IXDP28x5 platform. This
is just and IXDP2801 with a new CPU rev but the bootloader
has been updated to reflect a new machine ID so we just build
support for it by default when we build IXDP2801.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:06 +00:00
Ben Dooks 3fc3e1c064 [ARM] 3333/1: S3C2XX - add dclk and clkout clock support
Patch from Ben Dooks

Add enable and set_parent calls for the dclk
and clkout clocks.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:05 +00:00
Ben Dooks 110d322b29 [ARM] 3327/1: S3C2410 - add osiris machine support
Patch from Ben Dooks

Support for Simtec IM2440D20 CPU modules (Osiris)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:00 +00:00
Nicolas Pitre a61ea9326d [ARM] 3261/2: remove phys_ram from struct machine_desc (part 3)
Patch from Nicolas Pitre

This field is redundent since it must be equal to PHYS_OFFSET anyway.

There is no reference to it anymore so remove it at last.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:05:58 +00:00
Russell King 71dccd0f15 [ARM] Collect Primecell PL01x-based debug implementations together
Several ARM machine implementations used a PL01x primecell compatible
serial port for debugging purposes, and indepdently implemented the low
level debug macros every time.  Provide a common implementation and
convert these implementations to use this version.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:05:58 +00:00
Russell King 268099e3cc [ARM] Collect 8250-based debug implementations together
Several ARM machine implementations used an 8250 compatible port for
debugging purposes, and indepdently implemented the low level debug
macros every time.  Provide a common implementation and convert these
implementations to use this version.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:05:57 +00:00
Russell King 22398f57b6 [ARM] Fix SA1100 debug-macros.S
This needs asm/hardware.h - include it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:05:55 +00:00
Russell King 824b5b5e59 [ARM] Adapt vic.c to allow for multiple VICs in a system.
Some SoCs have multiple VIC devices.  Adapt the generic vic code
to allow multiple implementations to be handled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:05:52 +00:00
Russell King 548153663b [ARM] Rename chipdata to 'base' and make it an iomem pointer
In all current use cases, "chipdata" is used to store an iomem address.
Mark it with __iomem, and rename it to 'base'.  Leave the accessor macros
alone.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:05:51 +00:00
Russell King 411ef7f4cf [ARM] Remove asm/arch/irq.h
asm/arch/irq.h used to be included from asm/irq.h, but was removed
from the ARM kernel a long time ago.  Consequently, the contents
of asm/arch/irq.h (which mostly contain a definition for fixup_irq())
have not been used.  Hence, remove asm/arch/irq.h.

Some machine support files incorrectly included this file, making
little or no use of the contents.  Move the contents to a local
include file, and remove those include statements as well.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:05:46 +00:00
Russell King f80658137f [ARM] Move HZ definition into Kconfig
Move the HZ definition into Kconfig, and set appropriate defaults
for platforms.  Remove mostly empty asm/arch/param.h include file.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:05:45 +00:00
Russell King 74945c8616 [ARM] nommu: Move hardware page table definitions to pgtable-hwdef.h
Move the hardware PMD and PTE page table definitions from pgtable.h
into pgtable-hwdef.h, and include pgtable-hwdef.h as necessary.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:03:25 +00:00
Russell King fb1c7762b9 [ARM] Fix typo in tlbflush.h
s/CONFIG_MMY/CONFIG_MMU/

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:03:21 +00:00
Hyok S. Choi 0157903e84 [ARM] noMMU: removes TLB codes in nommu mode
This patch removes TLB related codes in nommu mode.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:03:20 +00:00
Russell King 7abe53155b [ARM] Fix cosmetic typo in asm/irq.h
The IRQ resource flags are IORESOURCE_IRQ not IRQRESOURCE_IRQ.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 10:12:31 +00:00
Ben Dooks dabaeff06c [ARM] 3364/1: [cleanup] warning fix - definitions for enable_hlt and disable_hlt
Patch from Ben Dooks

The enable_hlt and disable_hlt should be declared in
include/asm/setup.h. This fixes sparse errors from
arch/arm/kernel/process.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-15 23:17:26 +00:00
Russell King cdaabbd74b [ARM] iwmmxt thread state alignment
This patch removes the reliance of iwmmxt on hand coded alignments.
Since thread_info is always 8K aligned, specifying that fpstate is
8-byte aligned achieves the same effect without needing to resort
to hand coded alignments.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-12 22:36:06 +00:00
Catalin Marinas 6a0e243069 [ARM] 3352/1: DSB required for the completion of a TLB maintenance operation
Patch from Catalin Marinas

Chapter B2.7.3 in the latest ARM ARM (with v6 information) states that
the completion of a TLB maintenance operation is only guaranteed by
the execution of a DSB (Data Syncronization Barrier, formerly Data
Write Barrier or Drain Write Buffer).

Note that a DSB is only needed in the flush_tlb_kernel_* functions
since the completion is guaranteed by a mode change (i.e. switching
back to user mode) for the flush_tlb_user_* functions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-07 14:42:27 +00:00
Andrew Victor df666b9c51 [ARM] 3325/2: GPIO function to control multi-drive (open collector) capability
Patch from Andrew Victor

This patch adds the at91_set_multi_drive() function to enable/disable
the multi-drive (open collector) pin capability on the AT91RM9200
processor.

This is necessary to fix the UDC (USB Gadget) driver for the AT91RM9200
board as it will not allow the board reset line to be pulled low if the
pullup is not driven as an open collector output as the boards are wired
to the USB connector on both the DK/EK.

This version of the patch updates it to 2.6.16-rc4.
Orignal patch by Jeff Warren.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22 21:23:35 +00:00
Alessandro Zummo af898b8f60 [ARM] 3343/1: NAS100d: Fix incorrect I2C pin assignment
Patch from Alessandro Zummo

The I2C pin assignment for the Iomega NAS100d board was incorrect.  This
patch fixes it.  The correct assignment has now been tested using the
new RTC class and a new driver for the RTC on the NAS100d.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22 21:12:06 +00:00