Commit Graph

19 Commits

Author SHA1 Message Date
Guennadi Liakhovetski 574ec547c7 ARM: add support for the EET board, based on the i.MX31 pcm037 module
The "EET" variant of the pcm037 board has an OLED display, using a S6E63D6
display controller on the first SPI interface, using GPIO57 as a chip-select
for it. S6E63D6 is initialised in the boot-loader, so we only have to take care
of the LCD. EET also adds several buttons and LEDs on GPIOs. This patch adds a
"pcm037_variant=" kernel command line parameter to specify at boot-time which
board the kernel is running on, default is "pcm970", specify "eet" for the EET
board.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-23 14:25:26 +02:00
Fabio Estevam aefa1c6e7b MX35: Add basic support for MX35PDK board
Add basic support for MX35PDK board (www.freescale.com/imx35pdk).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-03 11:44:50 +02:00
Daniel Mack 1bc34f7964 ARM: MX3: add skeleton for lilly-1131 development board
Support code for lilly-1131 is implemented in a module/baseboard
fashion. All code specific to peripherals found on the development board
will go to this file.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:30:40 +02:00
Daniel Mack 65b1aa13f2 ARM: MX3: basic support for lilly-1131 board
This patch adds basic support for INCO startec's LILLY-1131 iMX31 based
modules. The module needs a baseboard support to work which will be
added in the next patch.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:30:32 +02:00
Alberto Panizzo 5e9145edcc Atmark Armadillo 500 board support.
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-19 11:24:57 +02:00
Sascha Hauer 54df526819 [ARM] MX35: Add PCM043 board support
The PCM043 is a i.MX35 based board from Phytec also known as the
phyCORE-i.MX35.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:15:08 +02:00
Ilya Yanok 148854c65e qong: basic support for Dave/DENX QongEVB-LITE board
This patch adds basic support for Dave/DENX QongEVB-LITE i.MX31-based
board. It includes support for clocks initialization, UART1, NOR-flash,
FPGA-attached NAND flash and DNET ethernet controller (inside FPGA).

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:35:05 +01:00
Sascha Hauer 2cb536d13c [ARM] MX35: add clock support
This patch adds clock support for i.MX35 SoCs. We do not support setting
of clock rates yet, but most interesting clock rates should be reported.
I couldn't test all clock rates and the datasheet contains some obvious
bugs, so expect some bugs in this code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:28 +01:00
Sascha Hauer cb8ebb0223 [ARM] add i.MX35 build support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:27 +01:00
Valentin Longchamp e00f0b4a93 mx31moboard: initial support for various baseboards
This enables our mx31moboard to be used on the different baseboards that
we are developping according to the application needs. There are not
many differences between the boards for now, but when other peripherals
are available for mx31 the differences are going to grow.

v2: takes Sascha's comments into account

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:34:21 +01:00
Valentin Longchamp 988d2d49f7 [ARM] MX31: basic support for mx31moboard platform
Initial support for mx31moboard platfor with 3 serial ports
and NOR Flash

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:19 +01:00
Fabio Estevam 1553a1ec83 Add basic support for MX31PDK board.
Add basic support to the MX31PDK development board, also known
as MX31 3DS or MX31 3-stack board (http://www.freescale.com/imx31pdk).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:57:57 +01:00
Daniel Mack 9a4cd7a5c8 MX3: Add basic support for LogicPD i.MX31 LiteKit
This patch adds basic support for i.MX31 LiteKit by LogicPD.
With printascii() in kernel/printk.c, it boots right into the
rootfs-panic.

Note: This is a modified version of Daniel's patch to fit into this patch
stack.

> On 09.06.2008, at 17:26, Russell King - ARM Linux wrote:
>
> > I would much prefer it if board specific includes were included by the
> > code which needs them rather than in asm/arch/hardware.h.  With the
> > device model, drivers shouldn't need to include any board specific
> > includes - only the board specific C file should need it.
>
> The new version of this patch (#5102) has been uploaded to the patch
> tracker this morning.

Signed-off-by: Daniel Mack <daniel@caiaq.de>

-- 
 arch/arm/configs/mx31litekit_defconfig    | 1100 ++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/Kconfig                 |    7 
 arch/arm/mach-mx3/Makefile                |    1 
 arch/arm/mach-mx3/mx31lite.c              |   96 ++
 include/asm-arm/arch-mxc/board-mx31lite.h |   38 +
 include/asm-arm/arch-mxc/debug-macro.S    |    3 
 6 files changed, 1245 insertions(+)
2008-07-05 10:02:53 +02:00
Sascha Hauer ce8ffef0bf MX31: add basic pcm037 board support
This patch adds basic board support for phytecs pmc037 board.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:52 +02:00
Juergen Beisert d0f349fbce i.MXC family: Adding timer support
This patch adds timer support for the i.MX machine family. This code can
be used on the following machs:

 - i.MX1 (tested)
 - i.MX2 (i.MX21 (to be tested), i.MX27 (tested))
 - i.MX3 (i.MX31 (tested))

TODO: It seems impossible to build a kernel for more than one CPU because the
timer do not follow the platform device rules. So it does only work if
timer 1 can be accessed on all CPUs at the same address.

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:50 +02:00
Sascha Hauer 90292ea60f MXC: add io multiplexing functions for mx3
This patch adds functions to use the io multiplexer on mx3 platforms.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:50 +02:00
Sascha Hauer e3d13ff4b9 mxc: add MX3 support for i.MX internal UART driver
This patch adds MX3 support for the i.MX internal uart driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:48 +02:00
Sascha Hauer df1bf4bdb2 i.MX3: introduce clock API
This patch introduces the clock API for for arch-mxc

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 10:02:48 +02:00
Quinn Jensen 52c543f90c [ARM] 4461/1: MXC platform and i.MX31ADS core support
This patch adds the foundation pieces for
the Freescale MXC platforms, including
i.MX2 and i.MX3 based systems.

The bare-bones MX31 support in this patch
boots to the rootdev panic with 8250 serial
console configured "console=ttyS0,115200".
It assumes that Redboot is the boot loader.

Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22 15:44:46 +01:00