If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the
journaling will be aborted first and the error number will be recorded
into JBD2 superblock and, finally, the system will enter into the
panic state in "errors=panic" option. But, in the rare case, this
sequence is little twisted like the below figure and it will happen
that the system enters into panic state, which means the system reset
in mobile environment, before completion of recording an error in the
journal superblock. In this case, e2fsck cannot recognize that the
filesystem failure occurred in the previous run and the corruption
wouldn't be fixed.
Task A Task B
ext4_handle_error()
-> jbd2_journal_abort()
-> __journal_abort_soft()
-> __jbd2_journal_abort_hard()
| -> journal->j_flags |= JBD2_ABORT;
|
| __ext4_abort()
| -> jbd2_journal_abort()
| | -> __journal_abort_soft()
| | -> if (journal->j_flags & JBD2_ABORT)
| | return;
| -> panic()
|
-> jbd2_journal_update_sb_errno()
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change the journal's checksum functions to gate on whether or not the
crc32c driver is loaded, and gate the loading on the superblock bits.
This prevents a journal crash if someone loads a journal in no-csum
mode and then randomizes the superblock, thus flipping on the feature
bits.
Tested-By: Nikolay Borisov <kernel@kyup.com>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 6f6a6fda29 "jbd2: fix ocfs2 corrupt when updating journal
superblock fails" changed jbd2_cleanup_journal_tail() to return EIO
when the journal is aborted. That makes logic in
jbd2_log_do_checkpoint() bail out which is fine, except that
jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make
a progress in cleaning the journal. Without it jbd2_journal_destroy()
just loops in an infinite loop.
Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of
jbd2_log_do_checkpoint() fails with error.
Reported-by: Eryu Guan <guaneryu@gmail.com>
Tested-by: Eryu Guan <guaneryu@gmail.com>
Fixes: 6f6a6fda29
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When an error condition is detected, an error status should be recorded into
superblocks of EXT4 or JBD2. However, the write request is submitted now
without REQ_FUA flag, even in "barrier=1" mode, which is followed by
panic() function in "errors=panic" mode. On mobile devices which make
whole system reset as soon as kernel panic occurs, this write request
containing an error flag will disappear just from storage cache without
written to the physical cells. Therefore, when next start, even forever,
the error flag cannot be shown in both superblocks, and e2fsck cannot fix
the filesystem problems automatically, unless e2fsck is executed in
force checking mode.
[ Changed use test_opt(sb, BARRIER) of checking the journal flags -- TYT ]
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Merge second patchbomb from Andrew Morton:
- most of the rest of MM
- lots of misc things
- procfs updates
- printk feature work
- updates to get_maintainer, MAINTAINERS, checkpatch
- lib/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits)
exit,stats: /* obey this comment */
coredump: add __printf attribute to cn_*printf functions
coredump: use from_kuid/kgid when formatting corename
fs/reiserfs: remove unneeded cast
NILFS2: support NFSv2 export
fs/befs/btree.c: remove unneeded initializations
fs/minix: remove unneeded cast
init/do_mounts.c: add create_dev() failure log
kasan: remove duplicate definition of the macro KASAN_FREE_PAGE
fs/efs: femove unneeded cast
checkpatch: emit "NOTE: <types>" message only once after multiple files
checkpatch: emit an error when there's a diff in a changelog
checkpatch: validate MODULE_LICENSE content
checkpatch: add multi-line handling for PREFER_ETHER_ADDR_COPY
checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr()
checkpatch: fix processing of MEMSET issues
checkpatch: suggest using ether_addr_equal*()
checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files
checkpatch: remove local from codespell path
checkpatch: add --showfile to allow input via pipe to show filenames
...
In one case, we eliminate a local variable; in the other a strlen()
call and some .text.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
insert_revoke_hash does an open coded endless allocation loop if
journal_oom_retry is true. It doesn't implement any allocation fallback
strategy between the retries, though. The memory allocator doesn't know
about the never fail requirement so it cannot potentially help to move
on with the allocation (e.g. use memory reserves).
Get rid of the retry loop and use __GFP_NOFAIL instead. We will lose the
debugging message but I am not sure it is anyhow helpful.
Do the same for journal_alloc_journal_head which is doing a similar
thing.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If updating journal superblock fails after journal data has been
flushed, the error is omitted and this will mislead the caller as a
normal case. In ocfs2, the checkpoint will be treated successfully
and the other node can get the lock to update. Since the sb_start is
still pointing to the old log block, it will rewrite the journal data
during journal recovery by the other node. Thus the new updates will
be overwritten and ocfs2 corrupts. So in above case we have to return
the error, and ocfs2_commit_cache will take care of the error and
prevent the other node to do update first. And only after recovering
journal it can do the new updates.
The issue discussion mail can be found at:
https://oss.oracle.com/pipermail/ocfs2-devel/2015-June/010856.htmlhttp://comments.gmane.org/gmane.comp.file-systems.ext4/48841
[ Fixed bug in patch which allowed a non-negative error return from
jbd2_cleanup_journal_tail() to leak out of jbd2_fjournal_flush(); this
was causing xfstests ext4/306 to fail. -- Ted ]
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: stable@vger.kernel.org
jbd2_journal_get_write_access() and jbd2_journal_get_create_access() are
frequently called for buffers that are already part of the running
transaction - most frequently it is the case for bitmaps, inode table
blocks, and superblock. Since in such cases we have nothing to do, it is
unfortunate we still grab reference to journal head, lock the bh, lock
bh_state only to find out there's nothing to do.
Improving this is a bit subtle though since until we find out journal
head is attached to the running transaction, it can disappear from under
us because checkpointing / commit decided it's no longer needed. We deal
with this by protecting journal_head slab with RCU. We still have to be
careful about journal head being freed & reallocated within slab and
about exposing journal head in consistent state (in particular
b_modified and b_frozen_data must be in correct state before we allow
user to touch the buffer).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This basically reverts 47def82672 (jbd2: Remove __GFP_NOFAIL from jbd2
layer). The deprecation of __GFP_NOFAIL was a bad choice because it led
to open coding the endless loop around the allocator rather than
removing the dependency on the non failing allocation. So the
deprecation was a clear failure and the reality tells us that
__GFP_NOFAIL is not even close to go away.
It is still true that __GFP_NOFAIL allocations are generally discouraged
and new uses should be evaluated and an alternative (pre-allocations or
reservations) should be considered but it doesn't make any sense to lie
the allocator about the requirements. Allocator can take steps to help
making a progress if it knows the requirements.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: David Rientjes <rientjes@google.com>
fixes, which should improve CPU utilization and potential soft lockups
under heavy memory pressure, and Eric Whitney's bigalloc fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ZrTc
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Lots of bugs fixes, including Zheng and Jan's extent status shrinker
fixes, which should improve CPU utilization and potential soft lockups
under heavy memory pressure, and Eric Whitney's bigalloc fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
ext4: ext4_da_convert_inline_data_to_extent drop locked page after error
ext4: fix suboptimal seek_{data,hole} extents traversial
ext4: ext4_inline_data_fiemap should respect callers argument
ext4: prevent fsreentrance deadlock for inline_data
ext4: forbid journal_async_commit in data=ordered mode
jbd2: remove unnecessary NULL check before iput()
ext4: Remove an unnecessary check for NULL before iput()
ext4: remove unneeded code in ext4_unlink
ext4: don't count external journal blocks as overhead
ext4: remove never taken branch from ext4_ext_shift_path_extents()
ext4: create nojournal_checksum mount option
ext4: update comments regarding ext4_delete_inode()
ext4: cleanup GFP flags inside resize path
ext4: introduce aging to extent status tree
ext4: cleanup flag definitions for extent status tree
ext4: limit number of scanned extents in status tree shrinker
ext4: move handling of list of shrinkable inodes into extent status code
ext4: change LRU to round-robin in extent status tree shrinker
ext4: cache extent hole in extent status tree for ext4_da_map_blocks()
ext4: fix block reservation for bigalloc filesystems
...
When we're enabling journal features, we cannot use the predicate
jbd2_journal_has_csum_v2or3() because we haven't yet set the sb
feature flag fields! Moreover, we just finished loading the shash
driver, so the test is unnecessary; calculate the seed always.
Without this patch, we fail to initialize the checksum seed the first
time we turn on journal_checksum, which means that all journal blocks
written during that first mount are corrupt. Transactions written
after the second mount will be fine, since the feature flag will be
set in the journal superblock. xfstests generic/{034,321,322} are the
regression tests.
(This is important for 3.18.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.coM>
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Clear all three journal checksum feature flags before turning on
whichever journal checksum options we want. Rearrange the error
checking so that newer flags get complained about first.
Reported-by: TR Reardon <thomas_reardon@hotmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Sicne the jbd/jbd2 superblock is not released until the file system is
unmounted, allocate the buffer cache from the non-moveable area to
allow page migration and CMA allocations to more easily succeed.
Signed-off-by: Gioh Kim <gioh.kim@lge.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
It turns out that there are some serious problems with the on-disk
format of journal checksum v2. The foremost is that the function to
calculate descriptor tag size returns sizes that are too big. This
causes alignment issues on some architectures and is compounded by the
fact that some parts of jbd2 use the structure size (incorrectly) to
determine the presence of a 64bit journal instead of checking the
feature flags.
Therefore, introduce journal checksum v3, which enlarges the
descriptor block tag format to allow for full 32-bit checksums of
journal blocks, fix the journal tag function to return the correct
sizes, and fix the jbd2 recovery code to use feature flags to
determine 64bitness.
Add a few function helpers so we don't have to open-code quite so
many pieces.
Switching to a 16-byte block size was found to increase journal size
overhead by a maximum of 0.1%, to convert a 32-bit journal with no
checksumming to a 32-bit journal with checksum v3 enabled.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reported-by: TR Reardon <thomas_reardon@hotmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
The j_state_lock is one of the hottest locks in the jbd2 layer and
thus one of its scalability bottlenecks.
We don't need to be holding the j_state_lock while we are calling
wake_up(&journal->j_wait_commit), so release the lock a little bit
earlier.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mark functions as static in jbd2/journal.c because they are not used
outside this file.
This eliminates the following warning in jbd2/journal.c:
fs/jbd2/journal.c:125:5: warning: no previous prototype for ‘jbd2_verify_csum_type’ [-Wmissing-prototypes]
fs/jbd2/journal.c:146:5: warning: no previous prototype for ‘jbd2_superblock_csum_verify’ [-Wmissing-prototypes]
fs/jbd2/journal.c:154:6: warning: no previous prototype for ‘jbd2_superblock_csum_set’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Some of KERN_EMERG printk messages do not really deserve this log
level and the one in log_wait_commit() is even rather useless (the
journal has been previously aborted and *that* is where we should have
been complaining). So make some messages just KERN_ERR and remove the
useless message.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In the jbd2 checksumming code, explicitly declare separate variables with
endianness information so that we don't get confused and screw things up again.
Also fixes sparse warnings.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some of the functions which modify the jbd2 superblock were not
updating the checksum before calling jbd2_write_superblock(). Move
the call to jbd2_superblock_csum_set() to jbd2_write_superblock(), so
that the checksum is calculated consistently.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: stable@vger.kernel.org
Since the jbd_debug() is implemented with two separate printk()
calls, it can lead to corrupted and misleading debug output like
the following (see lines marked with "*"):
[ 290.339362] (fs/jbd2/journal.c, 203): kjournald2: kjournald2 wakes
[ 290.339365] (fs/jbd2/journal.c, 155): kjournald2: commit_sequence=42103, commit_request=42104
[ 290.339369] (fs/jbd2/journal.c, 158): kjournald2: OK, requests differ
[* 290.339376] (fs/jbd2/journal.c, 648): jbd2_log_wait_commit:
[* 290.339379] (fs/jbd2/commit.c, 370): jbd2_journal_commit_transaction: JBD2: want 42104, j_commit_sequence=42103
[* 290.339382] JBD2: starting commit of transaction 42104
[ 290.339410] (fs/jbd2/revoke.c, 566): jbd2_journal_write_revoke_records: Wrote 0 revoke records
[ 290.376555] (fs/jbd2/commit.c, 1088): jbd2_journal_commit_transaction: JBD2: commit 42104 complete, head 42079
i.e. the debug output from log_wait_commit and journal_commit_transaction
have become interleaved. The output should have been:
(fs/jbd2/journal.c, 648): jbd2_log_wait_commit: JBD2: want 42104, j_commit_sequence=42103
(fs/jbd2/commit.c, 370): jbd2_journal_commit_transaction: JBD2: starting commit of transaction 42104
It is expected that this is not easy to replicate -- I was only able
to cause it on preempt-rt kernels, and even then only under heavy
I/O load.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Suggested-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Current implementation of jbd2_journal_force_commit() is suboptimal because
result in empty and useless commits. But callers just want to force and wait
any unfinished commits. We already have jbd2_journal_force_commit_nested()
which does exactly what we want, except we are guaranteed that we do not hold
journal transaction open.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In some cases we cannot start a transaction because of locking
constraints and passing started transaction into those places is not
handy either because we could block transaction commit for too long.
Transaction reservation is designed to solve these issues. It
reserves a handle with given number of credits in the journal and the
handle can be later attached to the running transaction without
blocking on commit or checkpointing. Reserved handles do not block
transaction commit in any way, they only reduce maximum size of the
running transaction (because we have to always be prepared to
accomodate request for attaching reserved handle).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
j_wait_logspace and j_wait_checkpoint are unused. Remove them.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
__jbd2_log_space_left() and jbd_space_needed() were kind of odd.
jbd_space_needed() accounted also credits needed for currently
committing transaction while it didn't account for credits needed for
control blocks. __jbd2_log_space_left() then accounted for control
blocks as a fraction of free space. Since results of these two
functions are always only compared against each other, this works
correct but is somewhat strange. Move the estimates so that
jbd_space_needed() returns number of blocks needed for a transaction
including control blocks and __jbd2_log_space_left() returns free
space in the journal (with the committing transaction already
subtracted). Rename functions to jbd2_log_space_left() and
jbd2_space_needed() while we are changing them.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently when we add a buffer to a transaction, we wait until the
buffer is removed from BJ_Shadow list (so that we prevent any changes
to the buffer that is just written to the journal). This can take
unnecessarily long as a lot happens between the time the buffer is
submitted to the journal and the time when we remove the buffer from
BJ_Shadow list. (e.g. We wait for all data buffers in the
transaction, we issue a cache flush, etc.) Also this creates a
dependency of do_get_write_access() on transaction commit (namely
waiting for data IO to complete) which we want to avoid when
implementing transaction reservation.
So we modify commit code to set new BH_Shadow flag when temporary
shadowing buffer is created and we clear that flag once IO on that
buffer is complete. This allows do_get_write_access() to wait only
for BH_Shadow bit and thus removes the dependency on data IO
completion.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Similarly as for metadata buffers, also log descriptor buffers don't
really need the journal head. So strip it and remove BJ_LogCtl list.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When writing metadata to the journal, we create temporary buffer heads
for that task. We also attach journal heads to these buffer heads but
the only purpose of the journal heads is to keep buffers linked in
transaction's BJ_IO list. We remove the need for journal heads by
reusing buffer_head's b_assoc_buffers list for that purpose. Also
since BJ_IO list is just a temporary list for transaction commit, we
use a private list in jbd2_journal_commit_transaction() for that thus
removing BJ_IO list from transaction completely.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This commit tries to use kmem_cache_zalloc instead of kmem_cache_alloc/
memset when a new journal head is alloctated.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
allows installation of a hidden inode designed for boot loaders.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=GCT2
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Mostly performance and bug fixes, plus some cleanups. The one new
feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
allows installation of a hidden inode designed for boot loaders."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
ext4: fix type-widening bug in inode table readahead code
ext4: add check for inodes_count overflow in new resize ioctl
ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG
ext4: fix online resizing for ext3-compat file systems
jbd2: trace when lock_buffer in do_get_write_access takes a long time
ext4: mark metadata blocks using bh flags
buffer: add BH_Prio and BH_Meta flags
ext4: mark all metadata I/O with REQ_META
ext4: fix readdir error in case inline_data+^dir_index.
ext4: fix readdir error in the case of inline_data+dir_index
jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
ext4: mext_insert_extents should update extent block checksum
ext4: move quota initialization out of inode allocation transaction
ext4: reserve xattr index for Rich ACL support
jbd2: reduce journal_head size
ext4: clear buffer_uninit flag when submitting IO
ext4: use io_end for multiple bios
ext4: make ext4_bio_write_page() use BH_Async_Write flags
ext4: Use kstrtoul() instead of parse_strtoul()
ext4: defragmentation code cleanup
...
bh allocation uses kmem_cache_zalloc() so we needn't call
'init_buffer(bh, NULL, NULL)' and perform other set-zero-operations.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data. Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In the case where an inode has a very stale transaction id (tid) in
i_datasync_tid or i_sync_tid, it's possible that after a very large
(2**31) number of transactions, that the tid number space might wrap,
causing tid_geq()'s calculations to fail.
Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified
by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily",
attempted to fix this problem, but it only avoided kjournald spinning
forever by fixing the logic in jbd2_log_start_commit().
Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c
that might call jbd2_log_start_commit() with a stale tid, those
functions will subsequently call jbd2_log_wait_commit() with the same
stale tid, and then wait for a very long time. To fix this, we
replace the calls to jbd2_log_start_commit() and
jbd2_log_wait_commit() with a call to a new function,
jbd2_complete_transaction(), which will correctly handle stale tid's.
As a bonus, jbd2_complete_transaction() will avoid locking
j_state_lock for writing unless a commit needs to be started. This
should have a small (but probably not measurable) improvement for
ext4's scalability.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: George Barnett <gbarnett@atlassian.com>
Cc: stable@vger.kernel.org
There are multiple reasons to move away from debugfs. First of all,
we are only using it for a single parameter, and it is much more
complicated to set up (some 30 lines of code compared to 3), and one
more thing that might fail while loading the jbd2 module.
Secondly, as a module paramter it can be specified as a boot option if
jbd2 is built into the kernel, or as a parameter when the module is
loaded, and it can also be manipulated dynamically under
/sys/module/jbd2/parameters/jbd2_debug. So it is more flexible.
Ultimately we want to move away from using jbd_debug() towards
tracepoints, but for now this is still a useful simplification of the
code base.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Track the delay between when we first request that the commit begin
and when it actually begins, so we can see how much of a gap exists.
In theory, this should just be the remaining scheduling quantuum of
the thread which requested the commit (assuming it was not a
synchronous operation which triggered the commit request) plus
scheduling overhead; however, it's possible that real time processes
might get in the way of letting the kjournald thread from executing.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Don't send an extra wakeup to kjournald in the case where we
already have the proper target in j_commit_request, i.e. that
transaction has already been requested for commit.
commit deeeaf13 "jbd2: fix fsync() tid wraparound bug" changed
the logic leading to a wakeup, but it caused some extra wakeups
which were found to lead to a measurable performance regression.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[tytso@mit.edu: reworked check to make it clearer]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_handle_release_buffer() was intended to remove journal
write access from a buffer, but it doesn't actually do anything
at all other than add a BUFFER_TRACE point, but it's not reliably
used for that either. Remove all the associated dead code.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
using the meta_bg feature. This allows us to resize file systems
which are greater than 16TB. In addition, the speed of online
resizing has been improved in general.
We also fix a number of races, some of which could lead to deadlocks,
in ext4's Asynchronous I/O and online defrag support, thanks to good
work by Dmitry Monakhov.
There are also a large number of more minor bug fixes and cleanups
from a number of other ext4 contributors, quite of few of which have
submitted fixes for the first time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=iYeV
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The big new feature added this time is supporting online resizing
using the meta_bg feature. This allows us to resize file systems
which are greater than 16TB. In addition, the speed of online
resizing has been improved in general.
We also fix a number of races, some of which could lead to deadlocks,
in ext4's Asynchronous I/O and online defrag support, thanks to good
work by Dmitry Monakhov.
There are also a large number of more minor bug fixes and cleanups
from a number of other ext4 contributors, quite of few of which have
submitted fixes for the first time."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (69 commits)
ext4: fix ext4_flush_completed_IO wait semantics
ext4: fix mtime update in nodelalloc mode
ext4: fix ext_remove_space for punch_hole case
ext4: punch_hole should wait for DIO writers
ext4: serialize truncate with owerwrite DIO workers
ext4: endless truncate due to nonlocked dio readers
ext4: serialize unlocked dio reads with truncate
ext4: serialize dio nonlocked reads with defrag workers
ext4: completed_io locking cleanup
ext4: fix unwritten counter leakage
ext4: give i_aiodio_unwritten a more appropriate name
ext4: ext4_inode_info diet
ext4: convert to use leXX_add_cpu()
ext4: ext4_bread usage audit
fs: reserve fallocate flag codepoint
ext4: remove redundant offset check in mext_check_arguments()
ext4: don't clear orphan list on ro mount with errors
jbd2: fix assertion failure in commit code due to lacking transaction credits
ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails
ext4: enable FITRIM ioctl on bigalloc file system
...
This sequence:
# truncate --size=1g fsfile
# mkfs.ext4 -F fsfile
# mount -o loop,ro fsfile /mnt
# umount /mnt
# dmesg | tail
results in an IO error when unmounting the RO filesystem:
[ 318.020828] Buffer I/O error on device loop1, logical block 196608
[ 318.027024] lost page write due to I/O error on loop1
[ 318.032088] JBD2: Error -5 detected when updating journal superblock for loop1-8.
This was a regression introduced by commit 24bcc89c7e7c: "jbd2: split
updating of journal superblock and marking journal empty".
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
the ones which cause problems for ext4 on RAID --- a performance
problem when mounting very large filesystems, and a kernel OOPS when
doing an rm -rf on large directory hierarchies on fast devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABCAAGBQJQLlVSAAoJENNvdpvBGATwhOYQAKx22YF9+SHnnVv2GtCQrsE6
N3acE/FoDYiO1/LRa5M6NDO3ZIL4Vqi6409LYFQky/SQL8ziM5CBeLOBD9qPTE1L
AGrzWn4vzZcjEf90ZEBN99fS5Uj1A9Axz2denxy7Hfb2HcSXfcuuVQXpdS42cFo8
gwtlX4jxmPkbjRlAdeqYVBNuWpTZ0a+UyLc4A6v3aLcbzPSJvPYmI7mKCksiSySU
yt0atjMDb56blAQJ2TITdAZN6rQShNzyok2pPfxaLusl5g0Gtjq8sSEPof1PQ1zq
gDFc+kpZvUyPdwQzV3IL8+TodFFZ0x/2OhqoYCTKajROLHGjQFsdkb8EJbnNeDff
EDxIjeVJR0kzSuSNWu+n5028lmEd9Sk7Ykr37cHeUxG8/0SADUqSDQYNhvbOPQsj
iq5dwF79tKjuMqjJrABuWA1ZNgHBISXgyBmHLXgEk3LrgucT9UIg8Zlkhq480SYO
JXhmkO2Ka4UwkVUShoWgRtEzRgUxhINBShs6g67zwm6slS4s2CWHnqhUn6EQe6+r
DY/hoUA8KbdG3Cf5iJBFM2kUO68CDIXeJjocA7JvlouRgQSxmkOceIuk7DusAitM
nHJKAtSNgC/z7yMoNi7YN0S5YYcCebmO1MEPzYSpPH07YwLJVNmh9Fk6BIfb7vi3
vJSQMBrgGrbaXrnhBA7z
=Zulv
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
"The following are all bug fixes and regressions. The most notable are
the ones which cause problems for ext4 on RAID --- a performance
problem when mounting very large filesystems, and a kernel OOPS when
doing an rm -rf on large directory hierarchies on fast devices."
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix kernel BUG on large-scale rm -rf commands
ext4: fix long mount times on very big file systems
ext4: don't call ext4_error while block group is locked
ext4: avoid kmemcheck complaint from reading uninitialized memory
ext4: make sure the journal sb is written in ext4_clear_journal_err()
After we transfer set the EXT4_ERROR_FS bit in the file system
superblock, it's not enough to call jbd2_journal_clear_err() to clear
the error indication from journal superblock --- we need to call
jbd2_journal_update_sb_errno() as well. Otherwise, when the root file
system is mounted read-only, the journal is replayed, and the error
indicator is transferred to the superblock --- but the s_errno field
in the jbd2 superblock is left set (since although we cleared it in
memory, we never flushed it out to disk).
This can end up confusing e2fsck. We should make e2fsck more robust
in this case, but the kernel shouldn't be leaving things in this
confused state, either.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from various jbd and jbd2.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Calculate and verify checksums of each data block being stored in the journal.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate and verify a checksum covering the journal superblock.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Obtain a reference to the crc32c driver if needed for the v2 checksum.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Daeho Jeong