This simplifies the code for v2 and v3 and gives v4 a chance to decide
on referrals without needing to modify the generic client.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I create a new proc_lookup_mountpoint() to use when submounting an NFS
v4 share. This function returns an rpc_clnt to use for performing an
fs_locations() call on a referral's mountpoint.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Whenever lookup sees wrongsec do a secinfo and retry the lookup to find
attributes of the file or directory, such as "is this a referral
mountpoint?". This also allows me to remove handling -NFS4ERR_WRONSEC
as part of getattr xdr decoding.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFSv4 spec is ambiguous about whether or not it is permissible
to reuse open owner names, so play it safe. This patch adds a timestamp
to the state_owner structure, and combines that with the IDA based
uniquifier.
Fixes a regression whereby the Linux server returns NFS4ERR_BAD_SEQID.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It is quite possible for the release_lockowner RPC call to race with the
close RPC call, in which case, we cannot dereference lsp->ls_state in
order to find the nfs_server.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that we select delegation stateids first, then
lock stateids and then open stateids.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If a setattr() fails because of an NFS4ERR_OPENMODE error, it is
probably due to us holding a read delegation. Ensure that the
recovery routines return that delegation in this case.
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
Otherwise we can end up with sequence id problems if the client reuses
the owner_id before the server has processed the release_lockowner
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace the union with the common struct stateid4 as defined in both
RFC3530 and RFC5661. This makes it easier to access the sequence id,
which will again make implementing support for parallel OPEN calls
easier.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It is really a function for selecting the correct stateid to use in a
read or write situation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Change the name to reflect what we're really doing: testing two
stateids for whether or not they match according the the rules in
RFC3530 and RFC5661.
Move the code from callback_proc.c to nfs4proc.c
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we know that the delegation stateid is bad or revoked, we need to
remove that delegation as soon as possible, and then mark all the
stateids that relied on that delegation for recovery. We cannot use
the delegation as part of the recovery process.
Also note that NFSv4.1 uses a different error code (NFS4ERR_DELEG_REVOKED)
to indicate that the delegation was revoked.
Finally, ensure that setlk() and setattr() can both recover safely from
a revoked delegation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
The NFS4CLNT_LAYOUTRECALL bit is a long-term impediment to scalability. It
basically stops all other recalls by a given server once any layout recall
is requested.
If the recall is for a different file, then we don't care.
If the recall applies to the same file, then we're in one of two situations:
Either we are in the case of a replay of an existing request, in which case
the session is supposed to deal with matters, or we are dealing with a
completely different request, in which case we should just try to process
it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Store a pointer to the rpc_task in struct nfs_seqid so that we can wake up
only that request that is able to grab the lock after we've released it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We have to ensure that the wake up from the waitqueue and the assignment
of xprt->snd_task are atomic. We can do this by assigning the snd_task
while under the waitqueue spinlock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Again, We're unlikely to ever need more than 2^31 simultaneous lock
owners, so let's replace the custom allocator.
Now that there are no more users, we can also get rid of the custom
allocator code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We're unlikely to ever need more than 2^31 simultaneous open owners,
so let's replace the custom allocator with the generic ida allocator.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Servers have a finite amount of memory to store NFSv4 open and lock
owners. Moreover, servers may have a difficult time determining when
they can reap their state owner table, thanks to gray areas in the
NFSv4 protocol specification. Thus clients should be careful to reuse
state owners when possible.
Currently Linux is not too careful. When a user has closed all her
files on one mount point, the state owner's reference count goes to
zero, and it is released. The next OPEN allocates a new one. A
workload that serially opens and closes files can run through a large
number of open owners this way.
When a state owner's reference count goes to zero, slap it onto a free
list for that nfs_server, with an expiry time. Garbage collect before
looking for a state owner. This makes state owners for active users
available for re-use.
Now that there can be unused state owners remaining at umount time,
purge the state owner free list when a server is destroyed. Also be
sure not to reclaim unused state owners during state recovery.
This change has benefits for the client as well. For some workloads,
this approach drops the number of OPEN_CONFIRM calls from the same as
the number of OPEN calls, down to just one. This reduces wire traffic
and thus open(2) latency. Before this patch, untarring a kernel
source tarball shows the OPEN_CONFIRM call counter steadily increasing
through the test. With the patch, the OPEN_CONFIRM count remains at 1
throughout the entire untar.
As long as the expiry time is kept short, I don't think garbage
collection should be terribly expensive, although it does bounce the
clp->cl_lock around a bit.
[ At some point we should rationalize the use of the nfs_server
->destroy method. ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[Trond: Fixed a garbage collection race and a few efficiency issues]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-3.2' of git://linux-nfs.org/~bfields/linux: (103 commits)
nfs41: implement DESTROY_CLIENTID operation
nfsd4: typo logical vs bitwise negate for want_mask
nfsd4: allow NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL | NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED
nfsd4: seq->status_flags may be used unitialized
nfsd41: use SEQ4_STATUS_BACKCHANNEL_FAULT when cb_sequence is invalid
nfsd4: implement new 4.1 open reclaim types
nfsd4: remove unneeded CLAIM_DELEGATE_CUR workaround
nfsd4: warn on open failure after create
nfsd4: preallocate open stateid in process_open1()
nfsd4: do idr preallocation with stateid allocation
nfsd4: preallocate nfs4_file in process_open1()
nfsd4: clean up open owners on OPEN failure
nfsd4: simplify process_open1 logic
nfsd4: make is_open_owner boolean
nfsd4: centralize renew_client() calls
nfsd4: typo logical vs bitwise negate
nfs: fix bug about IPv6 address scope checking
nfsd4: more robust ignoring of WANT bits in OPEN
nfsd4: move name-length checks to xdr
nfsd4: move access/deny validity checks to xdr code
...
The NFSv4 spec does not specify that the server must repeat that error,
so in order to avoid having the delegations revoked, we should handle
it immediately.
Also note that NFS4ERR_CB_PATH_DOWN does in fact renew the lease...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RFC3530 states that if the client holds a delegation, then it is obliged
to continue to send RENEW calls once every lease period in order to allow
the server to return NFS4ERR_CB_PATH_DOWN if the callback path is
unreachable.
This is not required for NFSv4.1, since the server can at any time set
the SEQ4_STATUS_CB_PATH_DOWN_SESSION in any SEQUENCE operation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the client is using NFS v4.1, then we can use SECINFO_NO_NAME to find
the secflavor for the initial mount. If the server doesn't support
SECINFO_NO_NAME then I fall back on the "guess and check" method used
for v4.0 mounts.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
can be skipped if the "eir_server_scope" from the exchange_id proc differs from
previous calls.
Also, in the future server_scope will be useful for determining whether client
trunking is available
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If a server for some reason keeps sending NFS4ERR_DELAY errors, we can end
up looping forever inside nfs4_proc_create_session, and so the usual
mechanisms for detecting if the nfs_client is dead don't work.
Fix this by ensuring that we loop inside the nfs4_state_manager thread
instead.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A later patch will need to perform a lookup using an
alternate client with a different security flavor.
This patch adds support for doing that on NFS v4.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to
the data server (as opposed to the MDS) and the data server WRITE
is not NFS_FILE_SYNC.
Only whole file layout support means that there is only one IOMODE_RW layout
segment.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Tested-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Attempt a pNFS file layout read by setting up the nfs_read_data struct and
calling nfs_initiate_read with the data server rpc client and the
filelayout rpc call ops.
Error handling is implemented in a subsequent patch.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Tested-by: Guo Mingyang <guomingyang@nrchpc.ac.cn>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Introduce a data server set_client and init session following the
nfs4_set_client and nfs4_init_session convention.
Once a new nfs_client is on the nfs_client_list, the nfs_client cl_cons_state
serializes access to creating an nfs_client struct with matching properties.
Use the new nfs_get_client() that initializes new clients.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There are no more external users of nfs4_state_mark_reclaim_nograce() or
nfs4_state_mark_reclaim_reboot(), so mark them as static.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4_schedule_state_recovery() should only be used when we need to force
the state manager to check the lease. If we just want to start the
state manager in order to handle a state recovery situation, we should be
using nfs4_schedule_state_manager().
This patch fixes the abuses of nfs4_schedule_state_recovery() by replacing
its use with a set of helper functions that do the right thing.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4 migration needs to reassociate state owners from the source to
the destination nfs_server data structures. To make that easier, move
the cl_state_owners field to the nfs_server struct. cl_openowner_id
and cl_lockowner_id accompany this move, as they are used in
conjunction with cl_state_owners.
The cl_lock field in the parent nfs_client continues to protect all
three of these fields.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A layout can request return-on-close. How this interacts with the
forgetful model of never sending LAYOUTRETURNS is a bit ambiguous.
We forget any layouts marked roc, and wait for them to be completely
forgotten before continuing with the close. In addition, to compensate
for races with any inflight LAYOUTGETs, and the fact that we do not get
any layout stateid back from the server, we set the barrier to the worst
case scenario of current_seqid + number of outstanding LAYOUTGETS.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is the heart of the wave 2 submission. Add the code to trigger
drain and forget of any afected layouts. In addition, we set a
"barrier", below which any LAYOUTGET reply is ignored. This is to
compensate for the fact that we do not wait for outstanding LAYOUTGETs
to complete as per section 12.5.5.2.1 of RFC 5661.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch make nfsv4 use the generic xattr handling code
to get the nfsv4 acl. This will help us to add richacl
support to nfsv4 in later patches
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up.
The pointer returned by ->decode_dirent() is no longer used as a
pointer. The only call site (xdr_decode() in fs/nfs/dir.c) simply
extracts the errno value encoded in the pointer. Replace the
returned pointer with a standard integer errno return value.
Also, pass the "server" argument as part of the nfs_entry instead of
as a separate parameter. It's faster to derive "server" in
nfs_readdir_xdr_to_array() since we already have the directory's inode
handy. "server" ought to be invariant for a set of entries in the
same directory, right?
The legacy versions of decode_dirent() don't use "server" anyway, so
it's wasted work for them to derive and pass "server" for each entry.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Convert nfs*xdr.c to use an xdr stream in decode_dirent. This will prevent a
kernel oops that has been occuring when reading a vmapped page.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove references to 'struct nameidata' from the low-level open_revalidate
code, and replace them with a struct nfs_open_context which will be
correctly initialised upon success.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Start moving the 'struct nameidata' dependent code out of the lower level
NFS code in preparation for the removal of open intents.
Instead of the struct nameidata, we pass down a partially initialised
struct nfs_open_context that will be fully initialised by the atomic open
upon success.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
flock locks want to be labelled using the process pid, while posix locks
want to be labelled using the fl_owner.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is needed by NFSv4.0 servers in order to keep the number of locking
stateids at a manageable level.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The 'so_delegations' list appears to be unused.
Also eliminate so_client. If we already have so_server, we can get to the
nfs_client structure.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In anticipation of the day when we have per-filesystem sessions, and also
in order to allow the session to change in the event of a filesystem
migration event.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We do not want to have the state recovery thread kick off and wait for a
memory reclaim, since that may deadlock when the writebacks end up
waiting for the state recovery thread to complete.
The safe thing is therefore to use GFP_NOFS in all open, close,
delegation return, lock, etc. operations that may be called by the
state recovery thread.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Drain the fore channel and reset the max_slots to the new value.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Even if the server is crazy, we should be able to mark the stateid as being
bad, to ensure it gets recovered.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
If the CLOSE or OPEN_DOWNGRADE call triggers a state recovery, and has
to be resent, then we must release the seqid. Otherwise the open
recovery will wait for the close to finish, which causes a deadlock.
This is mainly a NFSv4.1 problem, although it can theoretically happen
with NFSv4.0 too, in a OPEN_DOWNGRADE situation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move call to get the lease time and the setup of the state
renewal out of nfs4_create_session so that it can be called
after clearing the DRAINING flag. We use the getattr RPC
to obtain the lease time, which requires a sequence slot.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We should not assume that nfs41_init_clientid() will always want to
initialise the session. If it is being called due to a server reboot, then
we just want to reset the session after re-establishing the clientid.
Fix this by getting rid of the 'reset' parameter in
nfs4_proc_create_session(), and instead relying on whether or not the
session slot table pointer is non-NULL.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implements RECLAIM_COMPLETE as an asynchronous RPC.
NFS4ERR_DELAY is retried, NFS4ERR_DEADSESSION invokes the error handling
but does not result in a retry, since we don't want to have a lingering
RECLAIM_COMPLETE call sent in the middle of a possible new state recovery
cycle. If a session reset occurs, a new wave of reclaim operations will
follow, containing their own RECLAIM_COMPLETE call. We don't want a
retry to get on the way of recovery by incorrectly indicating to the
server that we're done reclaiming state.
A subsequent patch invokes the functionality.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
the server can indicate a number of error conditions by setting the
appropriate bits in the SEQUENCE operation. The client re-establishes
state with the server when it receives one of those, with the action
depending on the specific case.
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFSv4.1 spec-29 (18.36.3) says that the server MUST use an ONC RPC
(program) version number equal to 4 in callbacks sent to the client.
For now we allow both versions 1 and 4.
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the session is reset during state recovery, the state manager thread can
sleep on the slot_tbl_waitq causing a deadlock.
Add a completion framework to the session. Have the state manager thread set
a new session state (NFS4CLNT_SESSION_DRAINING) and wait for the session slot
table to drain.
Signal the state manager thread in nfs41_sequence_free_slot when the
NFS4CLNT_SESSION_DRAINING bit is set and the session is drained.
Reported-by: Trond Myklebust <trond@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The bit is no longer used for session setup, only for session reset.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reported-by: Trond Myklebust <trond.myklebust@netapp.com>
Resetting the clientid from the state manager could result in not confirming
the clientid due to create session not being called.
Move the create session call from the NFS4CLNT_SESSION_SETUP state manager
initialize session case into the NFS4CLNT_LEASE_EXPIRED case establish_clid
call.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Commit 008f55d0e0 (nfs41: recover lease in
_nfs4_lookup_root) forces the state manager to always run on mount. This is
a bug in the case of NFSv4.0, which doesn't require us to send a
setclientid until we want to grab file state.
In any case, this is completely the wrong place to be doing state
management. Moving that code into nfs4_init_session...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Unlike SETCLIENTID, EXCHANGE_ID requires a machine credential. Do not search
for credentials other than the machine credential.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
EXCHANGE_ID has different credential requirements than SETCLIENTID.
Prepare for a separate credential function.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfsv4.1 clientid is established via EXCHANGE_ID rather than
SETCLIENTID{,_CONFIRM}
This is implemented using a new establish_clid method in
nfs4_state_recovery_ops.
nfs41: establish clientid via exchange id only if cred != NULL
>From 2.6.26 reclaimer() uses machine cred for setting up the client id
therefore it is never expected to be NULL.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
[removed dprintk]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: lease renewal]
[revamped patch for new nfs4_state_manager design]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use the machine cred for sending SEQUENCE to renew
the client's lease.
[revamp patch for new state management design starting 2.6.29]
[nfs41: support minorversion 1 for nfs4_check_lease]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get cred in exchange_id when cred arg is NULL]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: use cl_machined_cred instead of cl_ex_cred]
Since EXCHANGE_ID insists on using the machine credential, cl_ex_cred is
not needed. nfs4_proc_exchange_id() is only called if the machine credential
is available. Remove the credential logic from nfs4_proc_exchange_id.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Send a NFSv4.1 SEQUENCE op rather than RENEW that was deprecated in
minorversion 1.
Use the nfs_client minorversion to select reboot_recover/
network_partition_recovery/state_renewal ops.
Note: we use reclaimer to create the nfs41 session before there are any
cl_superblocks for the nfs_client.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: check for session not minorversion]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[revamped patch for new nfs4_state_manager design]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: obliterate nfs4_state_recovery_ops.renew_lease method]
moved to nfs4_state_maintenance_ops
[also undid per-minorversion nfs4_state_recovery_ops here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the code to reset a session from the session_reclaimer to the
nfs4_state_manager. Destroy the session, and create a new one. Treat
NFS4ERR_BADSESSION and NFS4ERR_DEADSESSION as a successful
nfs4_proc_destroy_session. Signal nfs4_proc_create_session that this is a
session reset so that the session slot table is re-used.
If the clientid is stale, set both NFS4CLNT_LEASE_EXPIRED and
NFS4CLNT_SESSION_SETUP bits and retry.
Use a switch statement in nfs4_session_recovery_handle_error for future
patche which will add handling for other errors.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: session reset in nfs4_recovery_handle_error]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: reset session on nfs4_do_reclaim session reset error]
If nfs4_do_reclaim gets a session reset error, nfs4_recovery_handle_error
will set the NFS4CLNT_SESSION_SETUP bit, and the state manager should
continue processing to reset the session.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[move nfs4_proc_destroy_session declaration here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
At mount, nfs_alloc_client sets the cl_state NFS4CLNT_LEASE_EXPIRED bit
and nfs4_alloc_session sets the NFS4CLNT_SESSION_SETUP bit, so both bits are
set when nfs4_lookup_root calls nfs4_recover_expired_lease which schedules
the nfs4_state_manager and waits for it to complete.
Place the session setup after the clientid establishment in nfs4_state_manager
so that the session is setup right after the clientid has been established
without rescheduling the state manager.
Unlike nfsv4.0, the nfs_client struct is not ready to use until the session
has been established. Postpone marking the nfs_client struct to NFS_CS_READY
until after a successful CREATE_SESSION call so that other threads cannot use
the client until the session is established.
If the EXCHANGE_ID call fails and the session has not been setup (the
NFS4CLNT_SESSION_SETUP bit is set), mark the client with the error and return.
If the session setup CREATE_SESSION call fails with NFS4ERR_STALE_CLIENTID
which could occur due to server reboot or network partition inbetween the
EXCHANGE_ID and CREATE_SESSION call, reset the NFS4CLNT_LEASE_EXPIRED and
NFS4CLNT_SESSION_SETUP bits and try again.
If the CREATE_SESSION call fails with other errors, mark the client with
the error and return.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: NFS_CS_SESSION_SETUP cl_cons_state for back channel setup]
On session setup, the CREATE_SESSION reply races with the server back channel
probe which needs to succeed to setup the back channel. Set a new
cl_cons_state NFS_CS_SESSION_SETUP just prior to the CREATE_SESSION call
and add it as a valid state to nfs_find_client so that the client back channel
can find the nfs_client struct and won't drop the server backchannel probe.
Use a new cl_cons_state so that NFSv4.0 back channel behaviour which only
sets NFS_CS_READY is unchanged.
Adjust waiting on the nfs_client_active_wq accordingly.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: rename NFS_CS_SESSION_SETUP to NFS_CS_SESSION_INITING]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: set NFS_CL_SESSION_INITING in alloc_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
[nfs41: move session setup into a function]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved nfs4_proc_create_session declaration here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allocate a slot in the session slot table and set the sequence op arguments.
Called at the rpc prepare stage.
Add a status to nfs41_sequence_res, initialize it to one so that we catch
rpc level failures which do not go through decode_sequence which sets
the new status field.
Note that upon an rpc level failure, we don't know if the server processed the
sequence operation or not. Proceed as if the server did process the sequence
operation.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
[nfs41: sequence args use slotid]
[nfs41: find slot return slotid]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: remove SEQ4_STATUS_USE_TK_STATUS]
As per 11-14-08 review
[move extern declaration from nfs41: sequence setup/done support]
[removed sa_session definition, changed sa_cache_this into a u8 to reduce footprint]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: rpc_sleep_on slot_tbl_waitq must be called under slot_tbl_lock]
Otherwise there's a race (we've hit) with nfs4_free_slot where
nfs41_setup_sequence sees a full slot table, unlocks slot_tbl_lock,
nfs4_free_slots happen concurrently and call rpc_wake_up_next
where there's nobody to wake up yet, context goes back to
nfs41_setup_sequence which goes to sleep when the slot table
is actually empty now and there's no-one to wake it up anymore.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4.1 Sessions basic data types, initialization, and destruction.
The session is always associated with a struct nfs_client that holds
the exchange_id results.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[remove extraneous rpc_clnt pointer, use the struct nfs_client cl_rpcclient.
remove the rpc_clnt parameter from nfs4 nfs4_init_session]
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Use the presence of a session to determine behaviour instead of the
minorversion number.]
Signed-off-by: Andy Adamson <andros@netapp.com>
[constified nfs4_has_session's struct nfs_client parameter]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Rename nfs4_put_session() to nfs4_destroy_session() and call it from nfs4_free_client() not nfs4_free_server().
Also get rid of nfs4_get_session() and the ref_count in nfs4_session struct as keeping track of nfs_client should be sufficient]
Signed-off-by: Alexandros Batsakis <Alexandros.Batsakis@netapp.com>
[nfs41: pass rsize and wsize into nfs4_init_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
[separated out removal of rpc_clnt parameter from nfs4_init_session ot a
patch of its own]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Pass the nfs_client pointer into nfs4_alloc_session]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: don't assign to session->clp->cl_session in nfs4_destroy_session]
[nfs41: fixup nfs4_clear_client_minor_version]
[introduce nfs4_clear_client_minor_version() in this patch]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Refactor nfs4_init_session]
Moved session allocation into nfs4_init_client_minor_version, called from
nfs4_init_client.
Leave rwise and wsize initialization in nfs4_init_session, called from
nfs4_init_server.
Reverted moving of nfs_fsid definition to nfs_fs_sb.h
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Move NFS4_MAX_SLOT_TABLE define from under CONFIG_NFS_V4_1]
[Fix comile error when CONFIG_NFS_V4_1 is not set.]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved nfs4_init_slot_table definition to "create_session operation"]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: alloc session with GFP_KERNEL]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4_map_errors() can become static.
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Let the actual delegreturn stuff be run in the state manager thread rather
than allocating a separate kthread.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add a delegation cleanup phase to the state management loop, and do the
NFS4ERR_CB_PATH_DOWN recovery there.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4 defines a number of state errors which the client does not currently
handle. Among those we should worry about are:
NFS4ERR_ADMIN_REVOKED - the server's administrator revoked our locks
and/or delegations.
NFS4ERR_BAD_STATEID - the client and server are out of sync, possibly
due to a delegation return racing with an OPEN
request.
NFS4ERR_OPENMODE - the client attempted to do something not sanctioned
by the open mode of the stateid. Should normally just
occur as a result of a delegation return race.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the client for some reason is not able to recover all its state within
the time allotted for the grace period, and the server reboots again, the
client is not allowed to recover the state that was 'lost' using reboot
recovery.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4_drop_state_owner() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Sharing the open sequence queue causes a deadlock when we try to take
both a lock sequence id and and open sequence id.
This fixes the regression reported by Dimitri Puzin and Jeff Garzik: See
http://bugzilla.kernel.org/show_bug.cgi?id=9712
for details.
Reported-and-tested-by: Dimitri Puzin <bugs@psycast.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Otherwise, we do end up breaking close-to-open semantics. We also end up
breaking some of the silly-rename tests in Connectathon on some setups.
Please refer to the bug-report at
http://bugzilla.linux-nfs.org/show_bug.cgi?id=150
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Consider the case where the user has mounted the remote filesystem
server:/foo on the two local directories /bar and /baz using the
nosharedcache mount option. The files /bar/file and /baz/file are
represented by different inodes in the local namespace, but refer to the
same file /foo/file on the server.
Consider the case where a process opens both /bar/file and /baz/file, then
closes /bar/file: because the nfs4_state is not shared between /bar/file
and /baz/file, the kernel will see that the nfs4_state for /bar/file is no
longer referenced, so it will send off a CLOSE rpc call. Unless the
open_owners differ, then that CLOSE call will invalidate the open state on
/baz/file too.
Conclusion: we cannot share open state owners between two different
non-shared mount instances of the same filesystem.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4_do_close() does not currently have any way to ensure that the user
won't attempt to unmount the partition while the asynchronous RPC call
is completing. This again may cause Oopses in nfs_update_inode().
Add a vfsmount argument to nfs4_close_state to ensure that the partition
remains mounted while we're closing the file.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pass the work_struct pointer to the work function rather than context data.
The work function can use container_of() to work out the data.
For the cases where the container of the work_struct may go away the moment the
pending bit is cleared, it is made possible to defer the release of the
structure by deferring the clearing of the pending bit.
To make this work, an extra flag is introduced into the management side of the
work_struct. This governs auto-release of the structure upon execution.
Ordinarily, the work queue executor would release the work_struct for further
scheduling or deallocation by clearing the pending bit prior to jumping to the
work function. This means that, unless the driver makes some guarantee itself
that the work_struct won't go away, the work function may not access anything
else in the work_struct or its container lest they be deallocated.. This is a
problem if the auxiliary data is taken away (as done by the last patch).
However, if the pending bit is *not* cleared before jumping to the work
function, then the work function *may* access the work_struct and its container
with no problems. But then the work function must itself release the
work_struct by calling work_release().
In most cases, automatic release is fine, so this is the default. Special
initiators exist for the non-auto-release case (ending in _NAR).
Signed-Off-By: David Howells <dhowells@redhat.com>
on-the-wire data is big-endian
[in large part pulled from Alexey's patch]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The attached patch makes NFS share superblocks between mounts from the same
server and FSID over the same protocol.
It does this by creating each superblock with a false root and returning the
real root dentry in the vfsmount presented by get_sb(). The root dentry set
starts off as an anonymous dentry if we don't already have the dentry for its
inode, otherwise it simply returns the dentry we already have.
We may thus end up with several trees of dentries in the superblock, and if at
some later point one of anonymous tree roots is discovered by normal filesystem
activity to be located in another tree within the superblock, the anonymous
root is named and materialises attached to the second tree at the appropriate
point.
Why do it this way? Why not pass an extra argument to the mount() syscall to
indicate the subpath and then pathwalk from the server root to the desired
directory? You can't guarantee this will work for two reasons:
(1) The root and intervening nodes may not be accessible to the client.
With NFS2 and NFS3, for instance, mountd is called on the server to get
the filehandle for the tip of a path. mountd won't give us handles for
anything we don't have permission to access, and so we can't set up NFS
inodes for such nodes, and so can't easily set up dentries (we'd have to
have ghost inodes or something).
With this patch we don't actually create dentries until we get handles
from the server that we can use to set up their inodes, and we don't
actually bind them into the tree until we know for sure where they go.
(2) Inaccessible symbolic links.
If we're asked to mount two exports from the server, eg:
mount warthog:/warthog/aaa/xxx /mmm
mount warthog:/warthog/bbb/yyy /nnn
We may not be able to access anything nearer the root than xxx and yyy,
but we may find out later that /mmm/www/yyy, say, is actually the same
directory as the one mounted on /nnn. What we might then find out, for
example, is that /warthog/bbb was actually a symbolic link to
/warthog/aaa/xxx/www, but we can't actually determine that by talking to
the server until /warthog is made available by NFS.
This would lead to having constructed an errneous dentry tree which we
can't easily fix. We can end up with a dentry marked as a directory when
it should actually be a symlink, or we could end up with an apparently
hardlinked directory.
With this patch we need not make assumptions about the type of a dentry
for which we can't retrieve information, nor need we assume we know its
place in the grand scheme of things until we actually see that place.
This patch reduces the possibility of aliasing in the inode and page caches for
inodes that may be accessed by more than one NFS export. It also reduces the
number of superblocks required for NFS where there are many NFS exports being
used from a server (home directory server + autofs for example).
This in turn makes it simpler to do local caching of network filesystems, as it
can then be guaranteed that there won't be links from multiple inodes in
separate superblocks to the same cache file.
Obviously, cache aliasing between different levels of NFS protocol could still
be a problem, but at least that gives us another key to use when indexing the
cache.
This patch makes the following changes:
(1) The server record construction/destruction has been abstracted out into
its own set of functions to make things easier to get right. These have
been moved into fs/nfs/client.c.
All the code in fs/nfs/client.c has to do with the management of
connections to servers, and doesn't touch superblocks in any way; the
remaining code in fs/nfs/super.c has to do with VFS superblock management.
(2) The sequence of events undertaken by NFS mount is now reordered:
(a) A volume representation (struct nfs_server) is allocated.
(b) A server representation (struct nfs_client) is acquired. This may be
allocated or shared, and is keyed on server address, port and NFS
version.
(c) If allocated, the client representation is initialised. The state
member variable of nfs_client is used to prevent a race during
initialisation from two mounts.
(d) For NFS4 a simple pathwalk is performed, walking from FH to FH to find
the root filehandle for the mount (fs/nfs/getroot.c). For NFS2/3 we
are given the root FH in advance.
(e) The volume FSID is probed for on the root FH.
(f) The volume representation is initialised from the FSINFO record
retrieved on the root FH.
(g) sget() is called to acquire a superblock. This may be allocated or
shared, keyed on client pointer and FSID.
(h) If allocated, the superblock is initialised.
(i) If the superblock is shared, then the new nfs_server record is
discarded.
(j) The root dentry for this mount is looked up from the root FH.
(k) The root dentry for this mount is assigned to the vfsmount.
(3) nfs_readdir_lookup() creates dentries for each of the entries readdir()
returns; this function now attaches disconnected trees from alternate
roots that happen to be discovered attached to a directory being read (in
the same way nfs_lookup() is made to do for lookup ops).
The new d_materialise_unique() function is now used to do this, thus
permitting the whole thing to be done under one set of locks, and thus
avoiding any race between mount and lookup operations on the same
directory.
(4) The client management code uses a new debug facility: NFSDBG_CLIENT which
is set by echoing 1024 to /proc/net/sunrpc/nfs_debug.
(5) Clone mounts are now called xdev mounts.
(6) Use the dentry passed to the statfs() op as the handle for retrieving fs
statistics rather than the root dentry of the superblock (which is now a
dummy).
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Generalise the nfs_client structure by:
(1) Moving nfs_client to a more general place (nfs_fs_sb.h).
(2) Renaming its maintenance routines to be non-NFS4 specific.
(3) Move those maintenance routines to a new non-NFS4 specific file (client.c)
and move the declarations to internal.h.
(4) Make nfs_find/get_client() take a full sockaddr_in to include the port
number (will be required for NFS2/3).
(5) Make nfs_find/get_client() take the NFS protocol version (again will be
required to differentiate NFS2, 3 & 4 client records).
Also:
(6) Make nfs_client construction proceed akin to inodes, marking them as under
construction and providing a function to indicate completion.
(7) Make nfs_get_client() wait interruptibly if it finds a client that it can
share, but that client is currently being constructed.
(8) Make nfs4_create_client() use (6) and (7) instead of locking cl_sem.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Rename struct nfs4_client to struct nfs_client so that it can become the basis
for a general client record for NFS2 and NFS3 in addition to NFS4.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is (similar to getattr bitmap) but includes fs_locations and
mounted_on_fileid attributes. Use this bitmap for encoding in fs_locations
requests.
Note: We can probably do better by requesting locations as part of fsinfo
itself.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use component4-style formats for decoding list of servers and pathnames in
fs_locations.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4 allows for the fact that filesystems may be replicated across
several servers or that they may be migrated to a backup server in case of
failure of the primary server.
fs_locations is an NFSv4 operation for retrieving information about the
location of migrated and/or replicated filesystems.
Based on an initial implementation by Jiaying Zhang <jiayingz@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In RFC3530, the RENEW operation is allowed to use either
the same principal, RPC security flavour and (if RPCSEC_GSS), the same
mechanism and service that was used for SETCLIENTID_CONFIRM
OR
Any principal, RPC security flavour and service combination that
currently has an OPEN file on the server.
Choose the latter since that doesn't require us to keep credentials for
the same principal for the entire duration of the mount.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A closer reading of RFC3530 reveals that OPEN_DOWNGRADE must always
specify a access modes that have been the argument of a previous OPEN
operation.
IOW: doing OPEN(O_RDWR) and then OPEN_DOWNGRADE(O_WRONLY) is forbidden
unless the user called OPEN(O_WRONLY)
In order to fix that, we really need to track the three possible open
states separately.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RFC 3530 states that for OPEN_DOWNGRADE "The share_access and share_deny
bits specified must be exactly equal to the union of the share_access and
share_deny bits specified for some subset of the OPENs in effect for
current openowner on the current file.
Setattr is currently violating the NFSv4 rules for OPEN_DOWNGRADE in that
it may cause a downgrade from OPEN4_SHARE_ACCESS_BOTH to
OPEN4_SHARE_ACCESS_WRITE despite the fact that there exists no open file
with O_WRONLY access mode.
Fix the problem by replacing nfs4_find_state() with a modified version of
nfs_find_open_context().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We must not remove the nfs4_state structure from the inode open lists
before we are in sequence lock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Storing a pointer to the struct rpc_task in the nfs_seqid is broken
since the nfs_seqid may be freed well after the task has been destroyed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make NFSv4 return the fully initialized file pointer with the
stateid that it created in the lookup w/intent.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4 file state-changing functions such as OPEN, CLOSE, LOCK,... are all
labelled with "sequence identifiers" in order to prevent the server from
reordering RPC requests, as this could cause its file state to
become out of sync with the client.
Currently the NFS client code enforces this ordering locally using
semaphores to restrict access to structures until the RPC call is done.
This, of course, only works with synchronous RPC calls, since the
user process must first grab the semaphore.
By dropping semaphores, and instead teaching the RPC engine to hold
the RPC calls until they are ready to be sent, we can extend this
process to work nicely with asynchronous RPC calls too.
This patch adds a new list called "rpc_sequence" that defines the order
of the RPC calls to be sent. We add one such list for each state_owner.
When an RPC call is ready to be sent, it checks if it is top of the
rpc_sequence list. If so, it proceeds. If not, it goes back to sleep,
and loops until it hits top of the list.
Once the RPC call has completed, it can then bump the sequence id counter,
and remove itself from the rpc_sequence list, and then wake up the next
sleeper.
Note that the state_owner sequence ids and lock_owner sequence ids are
all indexed to the same rpc_sequence list, so OPEN, LOCK,... requests
are all ordered w.r.t. each other.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add {get,set,list}xattr methods for nfs4. The new methods are no-ops, to be
used by subsequent ACL patch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Bryan Schumaker