Commit Graph

5427 Commits

Author SHA1 Message Date
Jake Moilanen 183dee0f02 [PATCH] fbdev: ATI RN50 pci id
Here's the PCI ID for the ATI RN50 chip.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:53 -08:00
Antonino A. Daplas 5ee1ef96a0 [PATCH] fbdev: Convert a few drivers to use the fb_find_best_display helper
Convert i810fb, nvidiafb and savagefb to use the fb_find_best_display helper
when searching for the initial video mode.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:53 -08:00
Antonino A. Daplas 003cfc0c56 [PATCH] fbdev: Add helper to get an appropriate initial mode
Add new helper, fb_find_best_display(), which will search the modelist for the
best mode for the attached display.  This requires an EDID block that is
converted to struct fb_monspecs and a private modelist.  The search will be
done in this manner:

- if 1st detailed timing is preferred, use that
- else if dimensions of the display are known, use that to estimate xres and
- else if modelist has detailed timings, use the first detailed timing
- else, use the very first entry from the modelist

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:53 -08:00
Antonino A. Daplas 14c8102ffc [PATCH] fbdev: Rearrange mode database entries
Rearrange mode database entries such that preferred timings are entered first,
and less preferred timings are entered last.  (Detailed, VESA,
established/standard).

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Zach Smith 998e6d5116 [PATCH] fbcon: Add rl (Roman Large) font
I converted the "rl" console font from the kbd utility to be a built-in font
for the framebuffer console, and I was wondering if you would be OK with
including it.  I've generated a font_rl.c file and related minor
modifications.  I find it's the most visually appealing of the kbd fonts which
is why I use it and selected it for conversion.  I believe the font is GPL'd.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Antonino A. Daplas 5fab851ea1 [PATCH] i810fb: Cleanup I2C code
- The functions for reading the 1st and 2nd bus are essentially the same,
  except for the register.  Consolidate them all.

- According to Nicolas Boichat, there is an undocumented 3rd i2c bus for
  attaching daughter cards.  Add support for this.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Antonino A. Daplas 8a0934f296 [PATCH] vesafb: Disable mtrr as the default
vesafb occassionally gets the size wrong when setting the mtrr.  When X or DRI
attempts to set the mtrr, it will fail due to range overlap significantly
affecting their performance.  Disable mtrr and let the user explicitly enable
it with the mtrr:n option.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Ben Dooks 2726bff344 [PATCH] s3c2410fb: initialise device_driver .owner
Initialise the .owner field, so that if the driver is built as a module, the
system has a link to the owner

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Michal Januszewski 8fb6567e34 [PATCH] fbdev: fix the fb_find_nearest_mode() function
Currently the fb_find_nearest_mode() function finds a mode with screen
resolution closest to that described by the 'var' argument and with some
arbitrary refresh rate (eg.  in the following sequence of refresh rates: 70 60
53 85 75, 53 is selected).

This patch fixes the function so that it looks for the closest mode as far as
both resolution and refresh rate are concerned.  The function's first argument
is changed to fb_videomode so that the refresh rate can be specified by the
caller, as fb_var_screeninfo doesn't have any fields that could directly hold
this data.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Antonino A. Daplas 2fe0175491 [PATCH] nvidiafb: Fix empty macro
Use do {} while(0) for empty reverse_order() macro.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Antonino A. Daplas 475666d4f8 [PATCH] fbdev: Workaround for buggy EDID blocks
Some EDID blocks set the flag "prefer first detailed timing" without providing
any detailed timing at all.  Clear this flag if the block does not provide
detailed timings.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Peter 'p2' De Schrijver 9127fa2859 [PATCH] pm2fb: Manual configuration of timings for Elsa Winner 2000 Office
Attached is a small patch which configures the correct memory clock and
timings on the Elsa Winner 2000 Office pm2 based card.  This is necessary when
the card is used on a platform which does not support PC style BIOS
initialization.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas 1cc650c69f [PATCH] savagefb: Convert from VGA IO access to MMIO access
Use MMIO registers instead of banging the VGA IO registers.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas 1013d26663 [PATCH] atyfb: Get initial mode timings from LCD BIOS
Reported by: Jean-Philippe Guérard (Bugzilla Bug 1782)

"I've tried with video=atyfb:debug and video=atyfb:debug,mode:1280x600, \
nomtrr.

In both case, the screen stays black, but seems divided into 4 vertical bands.
 Some white lines pop up randomly on each vertical band."

The problem is a combination of an incorrect xclk plus lack of timing
information.  The adapter is attached to an LCD device that can do 1280x600
(which is not a standard resolution).  The global mode database does not have
an entry for it.  Fortunately, the Video BIOS contains the complete timing
info for this display, however, atyfb is not making use of it.

Add support to get the timing information from the BIOS, if available.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas eba5085045 [PATCH] vesafb: Fix color palette handling
Fix out-of-bounds bug.  The pseudopalette has room only for 16 entries, thus,
write only the first 16 entries to the pseudopalette.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas b4d8aea6d6 [PATCH] fbdev: Remove software clipping from drawing functions
Remove software clipping from imageblit, fillrect and copyarea.  Clipping is
not needed because the console layer assures that reads/writes doest not
happen beyond the extents of the framebuffer.  And software clipping tends to
hide bugs, if they do exist.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas dd0314f7bb [PATCH] fbcon: Initialize new driver when old driver is released
If machine has more than 1 driver installed, and they all drive the same
hardware, it's possible that the driver's fb_release() method will attempt to
restore the hardware state to the initial state.  This will leave the new
driver in an undefined state.  To prevent this problem, initialize the new
driver by calling fb_set_par() when the old driver is released by fbcon.

Signed-off-by: Antonino Daplas<adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas 3084a895c2 [PATCH] fbcon: Use helper function when filling out var structure
Instead of manually filling up the fields in struct fb_var_screeninfo, use the
display_to_var() helper.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas 4d9c5b6eb4 [PATCH] fbcon: Consolidate redundant code
Lot's of redundant code scattered throughout fbcon.c.  Consolidate them all
into one function, fbcon_update_softback().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:50 -08:00
Antonino A. Daplas c465e05a03 [PATCH] fbcon/fbdev: Move softcursor out of fbdev to fbcon
According to Jon Smirl, filling in the field fb_cursor with soft_cursor for
drivers that do not support hardware cursors is redundant.  The soft_cursor
function is usable by all drivers because it is just a wrapper around
fb_imageblit.  And because soft_cursor is an fbcon-specific hook, the file is
moved to the console directory.

Thus, drivers that do not support hardware cursors can leave the fb_cursor
field blank.  For drivers that do, they can fill up this field with their own
version.

The end result is a smaller code size.  And if the framebuffer console is not
loaded, module/kernel size is also reduced because the soft_cursor module will
also not be loaded.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:50 -08:00
Jean Delvare e764a20196 [PATCH] radeonfb: prevent spurious recompilations
Prevent spurious recompilations of the radeonfb driver when I2C/DDC support
is not included and i2c header files are modified.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Scott MacKenzie 3a59026ba1 [PATCH] intelfb: extend partial support of i915G to include i915GM
Add partial support for GMA900 within the i915GM chipset.

Signed-off-by: Scott MacKenzie <irrational@poboxes.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Benjamin Herrenschmidt b8c49ef6ae [PATCH] nvidiafb: Add flat panel dither support
nvidiafb didn't fully hook-up the code it borrowed from X for doing flat
panel dithering (this is useful for 6 bits panels).  This adds a driver
option to force it, and by default "reads" the current value from the chip
to get the firmware setting.  It significantly improves the quality of
images on the iMac G5 I have here (though the X driver doesn't yet "read"
the current value and defaults to 0, so you have to add Option "FBDither"
"true" to your X config file to get that, I'll try to fix X.org to "read"
the default unless specified asap).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Andrew Morton 7f8c54d20b [PATCH] nvidiafb-fix-mode-setting-ppc-support-warning-fixes
drivers/video/nvidia/nv_setup.c: In function `NVCommonSetup':
drivers/video/nvidia/nv_setup.c:408: warning: statement with no effect
drivers/video/nvidia/nv_setup.c:496: warning: statement with no effect
drivers/video/nvidia/nv_setup.c:504: warning: statement with no effect

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Benjamin Herrenschmidt 85f1503aff [PATCH] nvidiafb: Fix mode setting & PPC support
This patch fixes nvifiafb mode setting code to be closer to what the X
driver does, which actually makes it work on the 5200FX I have access to.
It also fix the routine that gets the EDID from Open Firmware on PPC, it
was broken in various ways and would crash at boot.  Compared to the patch
I posted to linux-fbdev last week, this one just changes a printk to be
closer to the other ones in the driver.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Randy Dunlap ecc41d5e02 [PATCH] fb: straighten up fb drivers menu
Arrange frame buffer menu:
- puts all Epson drivers together
- removes split of FB_PXA and FB_PXA_PARAMETERS by FB_W100
- results in PXA, W100, Epson, S3C2410, & Virtual FB drivers being
  presented at the same menu level as all other FB drivers

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Randy.Dunlap e65c0850ae [PATCH] framebuffer: add some help text in Kconfig
Frame buffer driver help text changes:
- Move S3 Trio next to S3 Savage;
- add or clarify help text for several FB drivers;
- add help text for FB console;
- add help text for bootup logos;

Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Ronald S. Bultje 8bc3efcfbf [PATCH] prevent dmesg warning in zr36067 driver
Fix the warning "Debug: sleeping function called from invalid context at
include/asm/semaphore.h:102" that the zr36067 driver emits every time an
application using JPEG capture starts up (e.g.  mjpegtools' lavrec).

The warning is harmless, but clogs up the dmesg output.  This was logged as
bugzilla #5403.  (Thanks to Christian Casteyde for helping me in fixing
this long-standing annoyance.)

Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:47 -08:00
Martin Bachem 597a107b1d [PATCH] i4l: update hfc_usb driver
- cleanup source
  - remove nonfunctional code parts

Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:47 -08:00
Matt Porter 6978bbc097 [PATCH] rapidio: message interface updates
Updates the RIO messaging interface to pass a device instance into the
event registeration and callbacks.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:47 -08:00
Matt Porter fa78cc5179 [PATCH] rapidio: core updates
Addresses issues raised with the 2.6.12-rc6-mm1 RIO support.  Fix dma_mask
init, shrink some code, general cleanup.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:46 -08:00
Matt Porter eb188d0e85 [PATCH] RapidIO support: core enum
Adds RapidIO enumeration/discovery.

The core code implements enumeration/discovery, management of
devices/resources, and interfaces for RIO drivers.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:46 -08:00
Matt Porter 394b701ce4 [PATCH] RapidIO support: core base
Adds a RapidIO subsystem to the kernel.  RIO is a switched fabric interconnect
used in higher-end embedded applications.  The curious can look at the specs
over at http://www.rapidio.org

The core code implements enumeration/discovery, management of
devices/resources, and interfaces for RIO drivers.

There's a lot more to do to take advantages of all the hardware features.
However, this should provide a good base for folks with RIO hardware to start
contributing.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:46 -08:00
Corey Minyard b385676b35 [PATCH] ipmi: fix watchdog timeout panic handling
If a panic came from the IPMI watchdog pretimeout and that was reported via
an NMI, it would also be reported via the standard IPMI flags, which would
get picked up when reporting panic events and cause another panic.  This
adds an atomic to avoid calling panic twice.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:45 -08:00
Corey Minyard e61fb5b651 [PATCH] ipmi: use rcu lock for using command receivers
Use rcu_read_lock for the cmd_rcvrs list, since that was what what
intended, anyway.  This means that all the users of the cmd_rcvrs_lock are
tasks, so the irq disables are no longer required for that lock and it can
become a semaphore.

Signed-off-by: Corey Minyard <minyard@acm.org>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:45 -08:00
Matt Domsch e9a705a0a0 [PATCH] ipmi: use kthread API
Convert ipmi driver thread to kthread API, only sleep when interface is
idle.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:45 -08:00
Corey Minyard a9a2c44ff0 [PATCH] ipmi: add timer thread
We must poll for responses to commands when interrupts aren't in use.  The
default poll interval is based on using a kernel timer, which varies with HZ.
For character-based interfaces like KCS and SMIC though, that can be way too
slow (>15 minutes to flash a new firmware with KCS, >20 seconds to retrieve
the sensor list).

This creates a low-priority kernel thread to poll more often.  If the state
machine is idle, so is the kernel thread.  But if there's an active command,
it polls quite rapidly.  This decrease a firmware flash time from 15 minutes
to 1.5 minutes, and the sensor list time to 4.5 seconds, on a Dell PowerEdge
x8x system.

The timer-based polling remains, to ensure some amount of responsiveness even
under high user process CPU load.

Checking for a stopped timer at rmmod now uses atomics and del_timer_sync() to
ensure safe stoppage.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:44 -08:00
Corey Minyard c3e7e7916e [PATCH] ipmi: kcs error0 delay
BMCs can get into ERROR0 state while flashing new firmware, particularly while
the BMC is erasing the next flash block, which may take a just under 2 seconds
on a Dell PowerEdge 2800 (1.75 seconds typical), during which time the
single-threaded firmware may not be able to process new commands.  In
particular, clearing OBF may not take effect immediately.

We want it to delay in ERROR0 after clearing OBF a bit waiting for OBF to
actually be clear before proceeding.

This introduces a new return value from the LLDD's event loop,
SI_SM_CALL_WITH_TICK_DELAY.  This means the calling thread/timer should
schedule_timeout() at least 1 tick, rather than busy-wait.  This is a longer
delay than SI_SM_CALL_WITH_DELAY, which is typically a 250us busy-wait.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:44 -08:00
Corey Minyard 21dcd300b1 [PATCH] ipmi: bt restart reset fixes
The current BT retry/reset mechanism fails to succeed on a PowerEdge 1650,
when the controller is wedged with B2H_ATN asserted at XACTION_START.  If this
occurs, no further commands will ever succeed unless the state of the
controller is first cleared out.

Furthermore, the soft reset would only occur if the first command after insmod
was the one that timed out, not if a later command timed out.

This patch changes the retry/reset mechanism to be as follows:

Before retrying a command, clear the state of the BT controller such that the
flags represent ready for a new transaction.  This increases the chance of
success of the restarted transaction.

After 2 retries, issue a soft reset and retry one more time before giving up
and reporting back a failure.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Rocky Craig <rocky.craig@hp.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:44 -08:00
Corey Minyard ea94027b92 [PATCH] ipmi: si start transaction hook
Some commands, on some system BMCs, don't respond at at all.  This is seen on
Dell PowerEdge x6xx and x7xx systems with IPMI 1.0 BT controllers when a "Get
SDR" command is issued, with a length field of 0x3A, which happens to be the
length of about SDR entries.  If another length is passed, this command
succeeds.

This patch adds general infrastructure for receiving commands before they're
passed down to the low-level drivers, such that they can be completed
immediately, or modified, prior to being sent to ->start_transaction().

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:44 -08:00
Corey Minyard d5a2b89a49 [PATCH] ipmi: more dell fixes
Make SMIC driver ignore EVT_AVAIL and SMS_ATN bits in flags register, as
they're used by systems management interrupts, not the host OS.

Make the OEM0 Data Available handler work for pre-IPMI 1.5 systems from Dell
too.

Without these two fixes, PowerEdge 2650 and other similar systems with SMIC
may hang a process (modprobe or anything using /dev/ipmi0).

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:44 -08:00
Corey Minyard 21d6c54215 [PATCH] ipmi: poweroff cleanups
Make module_param and MODULE_PARAM_DESC agree on poweroff_powercycle name.

There was an extraneous ifdef in the IPMI poweroff code that prevented it from
working if PROC_FS was disabled.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:44 -08:00
Corey Minyard cc4673eecd [PATCH] ipmi: watchdog parms in sysfs
Modify the IPMI watchdog parameters (the ones that make sense) to be exported
from sysfs.  This is somewhat complicated because these parameters have
side-effects that must be handled.

Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:44 -08:00
Corey Minyard c4edff1c19 [PATCH] ipmi: various si cleanup
A number of small changes for the various system interface drivers,
consolidated from a number of patches from Matt Domsch.

Clear B2H_ATN and drain the BMC message buffer on command timeout.  This
prevents further commands from failing after a timeout.

Add bt_debug and smic_debug module parameters, expose them in sysfs.  This
lets you enable and disable debugging messages at runtime.

Unsigned jiffies math in ipmi_si_intf.c causes a too-large value to be passed
to ->event() after jiffies wrap-around.  The BT driver had caught this, but
didn't know how to fix it.  Now all calls to ->event() use a sane value for
time.

Increase timeout for commands handed to the BT driver from 2 seconds to 5
seconds.  This is necessary particularly when the previous command was a
"Clear SEL", as that command completes, yet the BMC isn't really ready to
handle another command yet.

Silence BT debugging messages which were being printed on the console.

Increase SMIC timeout form 1/10s to 2s.  This is needed on Dell PowerEdge 2650
and PowerEdge 750 with ERA/O cards to allow commands to complete without
timing out.

Adds kcs_debug module param, to match behavior of BT and SMIC.  This also
prevents messages from being sent to the console unless explicitly requested.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:44 -08:00
Corey Minyard 393d2cc354 [PATCH] ipmi: use refcount in message handler
This patch is rather large, but it really can't be done in smaller chunks
easily and I believe it is an important change.  This has been out and tested
for a while in the latest IPMI driver release.  There are no functional
changes, just changes as necessary to convert the locking over (and a few
minor style updates).

The IPMI driver uses read/write locks to ensure that things exist while they
are in use.  This is bad from a number of points of view.  This patch removes
the rwlocks and uses refcounts and RCU lists to manage what the locks did.

Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:43 -08:00
Nick Piggin f5b3db0017 [PATCH] as: cooperating processes
Introduce the notion of cooperating processes (those that submit requests
close to one another), and use these statistics to make better choices about
whether or not to do anticipatory waiting.

Help and analysis from Seetharami Seelam <seelam@cs.utep.edu>

Performance testing from Seelam:

I set up my system and executed a couple of tests that I used for OLS.  I
tested with AS, cooperative process patch merged in -mm tree (which I called
Nick, below) and the cooperative patch with modifications to as_update_iohist
(which I called Seelam).

I used a dual-processor (2.28GHz Pentium 4 Xeon) system, with 1 GB main memory
and 1 MB L2 cache, running Linux 2.6.9.  Only a single processor is used for
the experiments.  I used 7.2K RPM Maxtor 10GB drive configured with ext2 file
system.

Experiment 1 (ex1) consists of reading  one Linux source trees using

  find . -type f -exec cat '{}' ';' > /dev/null.

Experiment 2 (ex2) consists of reading two disjoint Linux source trees
using

  find . -type f -exec cat '{}' ';' > /dev/null.

Experiment 3 (ex3) consists of streaming read of a 2GB file in the background
and 1 instance of the chunk reads in Experiment 1.

Timings for reading the Linux source are shown below:

             AS                     Nick          Seelam
ex1:      0m25.813s               0m27.859s      0m27.640s
ex2:      1m11.468s               1m13.918s      1m5.869s
ex3:      81m44.352s             10m38.572s      6m47.994s

The difference between the numbers in Experiment 3 must be due to the code in
as_update_iohist.  (akpm: that's not part of this patch.  So this patch is
"Nick").

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:43 -08:00
Tim Schmielau 8c65b4a604 [PATCH] fix remaining missing includes
Fix more include file problems that surfaced since I submitted the previous
fix-missing-includes.patch.  This should now allow not to include sched.h
from module.h, which is done by a followup patch.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:41 -08:00
Marcelo Tosatti e3f17f0f6e [PATCH] Only disallow _setting_ of function key string
Mikael Pettersson <mikpe@csd.uu.se> noted that the current 2.6-git (and 2.4)
patch to disallow KDSKBSENT for unpriviledged users should be less restrictive
allowing reading of current function key string entry, but not writing.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:39 -08:00
Abhay Salunke 274b69335d [PATCH] dell_rbu: Adding BIOS memory floor support
This patch has the changes to support the memory floor fix done in Dell
BIOS.  The BIOS incase of packet update mechanism would not accept packet
placed in memory below a cretain address.  This address is by default 128K
but can change.  The driver now can accept the memory floor if the user
chooses to make it will try to allocate contiguous physical memory above
the memory floor by allocating a set of packets till a valid memory
allocation is made.  All the allocates then are freed.  This repeats for
everty packet.

This patch was created by Michael E Brown and has been tested on 2.6.14-rc5

Signed-of-by: Michael E Brown <Michael_E_Brown@Dell.com>
Signed-off-by: Abhay Salunke <abhay_salunke@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:36 -08:00
Kylene Jo Hall e2a8f7a129 [PATCH] tpm: Fix lack of driver_unregister in init failcases
driver_unregister is not being properly called when the init function
returns an error case.  Restructured the return logic such that this and
the other cleanups all happen in one place.  Preformed many of the cleanups
that Andrew Morton's patch on Thursday made in tpm_atmel.c.  Fixed
Matthieu's concern about writing before discovery.

(akpm: rmk said:

This driver is buggy.  You must not provide your own release function - it
doesn't solve the problem which the warning (which you get when you don't
provide one) is telling you about.

You should convert your device driver over to the replacement dynamic platform
support, once it is merged.  IOW, something like:

	pdev = platform_device_alloc("mydev", id);
	if (pdev) {
		err = platform_device_add_resources(pdev, &resources,
						ARRAY_SIZE(resources));
		if (err == 0)
			err = platform_device_add_data(pdev, &platform_data,
						sizeof(platform_data));
		if (err == 0)
			err = platform_device_add(pdev);
		} else {
			err = -ENOMEM;
		}
		if (err)
			platform_device_put(pdev);
)

Signed-off-by: Kylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:36 -08:00
Kirill Smelkov 6f08b72cdd [PATCH] serial moxa: fix wrong BUG
There is a wrong BUG in mxser_close.

The BUG is triggered when tty->driver_data == NULL, But in fact this is not
a bug, because tty->driver->close is called even when tty->driver->open
fails.

LDD3 tells us to do nothing in such cases.

Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:36 -08:00
Kirill Smelkov 64698b694d [PATCH] serial moxa: fix leaks of struct tty_driver
Fix leak of struct tty_driver in mxser_init & mxser_module_exit

Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:36 -08:00
Kirill Smelkov 57432345b6 [PATCH] serial moxa: cleanup mxser_init
Remove explicit tty_driver ops initialisation, because this is already done
by tty_set_operations.

Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:36 -08:00
Matt Helsley 9f46080c41 [PATCH] Process Events Connector
This patch adds a connector that reports fork, exec, id change, and exit
events for all processes to userspace.  It replaces the fork_advisor patch
that ELSA is currently using.  Applications that may find these events
useful include accounting/auditing (e.g.  ELSA), system activity monitoring
(e.g.  top), security, and resource management (e.g.  CKRM).

Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:35 -08:00
Andrew Morton 78512ece14 [PATCH] serial console: touch NMI watchdog
Large console spews from IRQ or local_irq_disable() sections can cause the NMI
watchdog to go off.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:35 -08:00
Christian Borntraeger a5da866fe0 [PATCH] s390: fix memory leak in vmcp
If vmcp is interrupted by a signal the vmcp command buffer is not freed.
Found by Pete Zaitcev.

Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:34 -08:00
Ursula Braun-Krahl cdb32dc90b [PATCH] s390: duplicate timeout in qdio
Remove duplicate timeout in qdio_establish().

Signed-off-by: Ursula Braun-Krahl <braunu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:34 -08:00
Peter Oberparleiter 1e0291bade [PATCH] s390: dasd diag with block sizes > 512
Access to FBA disks via DIAG fails for block sizes > 512 byte.  The device
analysis code of the DIAG discipline does not properly initialize the DIAG250
device environment after completion of the analysis.  This results in VM only
serving 512 bytes per block I/O request whereas Linux expects larger block
sizes.  Add proper device environment setup to end of analysis code.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:34 -08:00
Peter Oberparleiter 86b368a580 [PATCH] s390: dasd diag inline assembly
Future versions of gcc may remove initialization code for control blocks used
by the diag250 inline assembly due to incompletely specified constraints.
This may lead to erratic behavior.  Fix the diag250 inline assembly
constraints.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:34 -08:00
Cornelia Huck a0016408f2 [PATCH] s390: ccwgroup online attribute
Make the interface for setting ccw group devices on-/offline consistent with
that for ccw devices: Check if the device driver provided a set_{on,off}line
function and just set the device on-/offline if not.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:33 -08:00
Paul Mundt 055a251214 [PATCH] superhyway: multiple block support and VCR rework
This extends the API somewhat to allow for platform-specific VCR reading and
writing.  Some platforms (like SH4-202) implement the VCR in a split VCRL and
VCRH, but end up being in reverse order or have other quirks that need to be
dealt with, so we add a set of superhyway_ops per-bus to accomodate this.

We also have to extend the per-device resources somewhat, as some devices now
conveniently split control and data blocks.  So we allow a platform to
register its set of SuperHyway devices via superhyway_add_devices() with the
control block always ordered as the first resource (as this is the one that
userspace cares about).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:28 -08:00
Paul Mundt e87eaad107 [PATCH] sh: Re-add sh to drivers/Makefile
drivers/sh/ got dropped from drivers/Makefile, so add it back in..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:27 -08:00
Stephen Hemminger d311b0d3d8 [PATCH] 3c59x: don't enable scatter/gather w/o checksum support
It is not valid to enable scatter/gather without hardware checksum support
of some kind. (akpm: applies only to the old boomerang cards).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:25 -08:00
John W. Linville 900fd17dd0 [PATCH] 3c59x: enable use of memory-mapped PCI I/O
Add capability for 3c59x driver to use memory-mapped PCI I/O resources.
This may improve performance for those devices so equipped.  This will be
the default behaviour for IS_CYCLONE and IS_TORNADO devices.  Additionally,
it can be enabled/disabled individually for up to MAX_UNITS number of
devices via the use_mmio module option or for all units via the
global_use_mmio option.  The use_mmio option overrides the global_use_mmio
option for those devices specified.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:25 -08:00
John W. Linville 35b306743d [PATCH] 3c59x: correct rx_dropped counting
Only increment rx_dropped in case of lack of resources (i.e. not for
frames with errors).

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:25 -08:00
John W. Linville bb531fc071 [PATCH] 3c59x: support ETHTOOL_GPERMADDR
Add support for ETHTOOL_GPERMADDR to 3c59x.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:25 -08:00
John W. Linville 46e5e4a897 [PATCH] 3c59x: fix some grammar in module parameter descriptions
Correct several (apparently cut & paste) grammatical typos in module
parameter descriptions.  They seem to have originated as copies of the
description for "global_options".

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:25 -08:00
John W. Linville 9954ab7fd5 [PATCH] 3c59x: cleanup init of module parameter arrays
Beautify the array initilizations for the module parameters.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:25 -08:00
John W. Linville 32fb5f06db [PATCH] 3c59x: bounds checking for hw_checksums
Add bounds checking to usage of hw_checksums module parameter array.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:25 -08:00
Tommy Christensen d9e46de34e [PATCH] 3c59x: avoid blindly reading link status twice
In order to spare some I/O operations, be more intelligent about when to
read from the PHY.

Pointed out by Bogdan Costescu.

Signed-off-by: Tommy S. Christensen <tommy.christensen@tpack.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:25 -08:00
Neil Horman 106427e65d [PATCH] 3c59x: cleanup of mdio_read routines to use MII_* macros
Clean up mdio_read routines in 3c59x.c to use the MII_* macros defined in
include/linux/mii.h

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:24 -08:00
John W. Linville 62afe595de [PATCH] 3c59x: convert to use of pci_iomap API
Convert 3c59x driver to use pci_iomap API.  This makes it easier to enable
the use of memory-mapped PCI I/O resources.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:24 -08:00
Thomas Gleixner c2965f1129 [MTD] chips: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 15:25:34 +01:00
Thomas Gleixner d5c5e78af5 [MTD] OneNAND: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 15:11:28 +01:00
Thomas Gleixner 61b03bd7c3 [MTD] NAND: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 15:10:37 +01:00
Thomas Gleixner e5580fbe8a [MTD] devices: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 15:06:59 +01:00
Thomas Gleixner 69f34c98c1 [MTD] maps: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 15:01:58 +01:00
Thomas Gleixner 1f948b43f7 [MTD] chips: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 14:45:15 +01:00
Thomas Gleixner 97894cda57 [MTD] core: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 13:37:38 +01:00
Takashi Iwai c3348760aa [PATCH] Fix wrong irq enable via rtc_control()
rtc_control() may be called in the interrupt context in ALSA rtc-timer
driver.  The patch fixes the wrong irq enable in rtc.c, and also fixes
the possible race of bit flags.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-07 11:14:57 +01:00
Konstantin Baidarov b95f9609c7 [MTD] chips cfi_cmdset_0002: Prevent timeout race
We've noticed that sometimes "MTD do_write_buffer(): software timeout"
message was printed out when writing to a Fujitsu NOR flash.
It turned out that this was because of a race in the timeout handling
do_write_buffer(). A small timeout of (HZ / 1000) + 1 is used there, and
sometimes if the timer interrupt handling takes more than one or even two
jiffies (which is 1-2 ms with HZ == 1000) and that interrupt happens just
after chip_ready() call, the driver bails out from a ready polling loop
despite the chip has actually become ready while all those interrupts were
handled. To deal with this issue, extra check for chip ready is neccessary on
timeout expiration (and the checks should better be reordered).
As do_write_oneword() uses the same approach, it needs to also be changed.

Signed-off-by: Konstantin Baidarov <kbaidarov@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 10:47:08 +01:00
Marian Balakowicz be30c10fd8 [MTD] maps: Add support for the "TQM834x" Boards
The following patch adds support for the TQ Systems  TQM834x  Boards.
Verified on TQM8349L.

This is a resubmit after integrating the suggested changes.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 10:46:22 +01:00
Lennert Buytenhek ea17629f3e [MTD] maps ixp2000: fix compile warnings in ixp2000 map driver
Fix two compile warnings that occur because of treating two
'unsigned long's as 'void *'s.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 10:44:15 +01:00
Jeff Garzik b78612b796 Merge branch 'master' 2005-11-06 23:01:34 -05:00
Thomas Gleixner 3096617434 [MTD] NAND Kconfig: Simplify dependencies
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 02:49:43 +01:00
Thomas Gleixner 3e17404918 [MTD] maps/plat-ram: Avoid gcc 4.0 warning
The assignement of a "const char *" to a "char *" variable
is emitting a warning with gcc 4.0. We cannot change
mtd->name to "const char *" as we have dynamic assignements
of the name. So casting is the correct solution here

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 02:28:05 +01:00
Todd Poynor 868801e561 [MTD] NAND: nand_write_ecc memory and OOB corruption
Nathan Roberts noticed the nand_write_ecc index into oobbuf goes out of
bounds when crossing an erase block boundary, causing incorrect OOB data
to be written and corrupting memory.  Reset the index to zero after
re-preparing oobbuf for a new erase block.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 02:24:31 +01:00
Vitaly Wool 49196f3332 [MTD] NAND nand_base: Fix shift for bad block check (16bit devices only)
In case of an odd offset, the result was shifted by 1 instead of 8

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 02:15:21 +01:00
Linus Torvalds 6adfd34e85 Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel 2005-11-06 16:58:38 -08:00
Thomas Gleixner 46d0d0fb61 [MTD] OneNAND/Kconfig: Fix dependencies
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 01:14:05 +01:00
Thomas Gleixner f0250fd7c3 Revert "[PATCH] OneNAND: Add simulator"
This reverts 405c829f98 commit.
2005-11-07 01:11:04 +01:00
Sean Young 01ac742db3 [MTD] maps/Kconfig: Simplify and update dependencies
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 00:40:10 +01:00
Sean Young 28f462308e [MTD] maps/ts5500: Fix partition support. Code cleanup
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 00:32:01 +01:00
Thomas Gleixner 15fdc52f35 [MTD] Tidy up Tims include cleanup
While we are at it, reorder the includes and
remove the silly /* TASK */ comment

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 00:14:42 +01:00
David Vrabel 9090ed0b82 [MTD] maps/ixp4xx: kill some warnings
- Use map.virt instead of map.map_priv_1 since it has the correct type.
- Use readw/writew instead of dereferencing an ioremap'd cookie.
- Remove an unused variable.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 00:08:05 +01:00
Richard Purdie 87c146dc1a [MTD] NAND sharpsl.c: Add support for akita and borzoi models
The Sharp Zaurus akita and borzoi models are large page flash devices.
This patch adds support for them to the sharpsl MTD NAND driver but
keeps the oob layout and bad block positions compatible with the Sharp
Zaurus 2.4 kernel and ROM bootloader.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 23:34:39 +01:00
Nicolas Pitre 6f6ed056d2 [MTD] chips/cfi_cmdset_0001: fix for P30 cfi parsing
Change to the extended cfi table parsing for Intel NOR flash that uses
the info in the extended table to 'walk' the table rather than using
hard coding for various primary extended query table version numbers.

From: Jared Hulbert <jaredeh@gmail.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 23:19:17 +01:00
Ben Dooks cfd320fbfc [MTD] NAND s3c2410.c: Fix timing calculation bugs
Spotted by basprog@mail.ru

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 23:15:54 +01:00
Ben Dooks d574504114 [MTD] NAND s3c2410.c: Fix missing dev parameter to dev_err
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 23:10:43 +01:00
Ben Dooks df2e162927 [MTD] maps/plat-ram.c: Initialize owner in device_driver struct
Added .owner initialisation to allow the
tracking of the device_driver owners when
built as a module

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 23:09:49 +01:00