Right now SCSI and others do their own command timeout handling.
Move those bits to the block layer.
Instead of having a timer per command, we try to be a bit more clever
and simply have one per-queue. This avoids the overhead of having to
tear down and setup a timer for each command, so it will result in a lot
less timer fiddling.
Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We call flush_disk() to make sure the buffer cache for the disk is
flushed after a disk resize. There are two resize cases, growing and
shrinking. Given that users can shrink/then grow a disk before
revalidate_disk() is called, we treat the grow case identically to
shrinking. We need to flush the buffer cache after an online shrink
because, as James Bottomley puts it,
The two use cases for shrinking I can see are
1. planned: the fs is already shrunk to within the new boundaries
and all data is relocated, so invalidate is fine (any dirty
buffers that might exist in the shrunk region are there only
because they were relocated but not yet written to their
original location).
2. unplanned: In this case, the fs is probably toast, so whether
we invalidate or not isn't going to make a whole lot of
difference; it's still going to try to read or write from
sectors beyond the new size and get I/O errors.
Immediately invalidating shrunk disks will cause errors for outstanding
I/Os for reads/write beyond the new end of the disk to be generated
earlier then if we waited for the normal buffer cache operation. It also
removes a potential security hole where we might keep old data around
from beyond the end of the shrunk disk if the disk was not invalidated.
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We need to be able to flush the buffer cache for for more than
just when a disk is changed, so we factor out common cache flush code
in check_disk_change() to an internal flush_disk() routine. This
routine will then be used for both disk changes and disk resizes (in a
later patch).
Include the disk name in the text indicating that there are busy
inodes on the device and increase the KERN severity of the message.
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Modify the SCSI disk driver to call the revalidate_disk()
wrapper. This allows us to do some housekeeping such as accounting for
a disk being resized online. The wrapper will call
sd_revalidate_disk() at the appropriate time.
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Check for device resize in the rescan_partitions() routine. If the device
has been resized, the bdev size is set to match. The rescan_partitions()
routine is called when opening the device and when calling the
BLKRRPART ioctl.
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The revalidate_disk routine now checks if a disk has been resized by
comparing the gendisk capacity to the bdev inode size. If they are
different (usually because the disk has been resized underneath the kernel)
the bdev inode size is adjusted to match the capacity.
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This is a wrapper for the lower-level revalidate_disk call-backs such
as sd_revalidate_disk(). It allows us to perform pre and post
operations when calling them.
We will use this wrapper in a later patch to adjust block device sizes
after an online resize (a _post_ operation).
Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
seqf can be started multiple times for a read and the header should be
printed only for the initial one. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
With the older SG interface, we don't know a user-space address to
trasfer data when executing a SCSI command. So we can't pass a
user-space address to blk_rq_map_user.
This patch fixes sg to pass a NULL user-space address to
blk_rq_map_user so that it just sets up a request and bios with page
frames propely without data transfer.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch changes blk_rq_map_user to accept a NULL user-space buffer
with a READ command if rq_map_data is not NULL. Thus a caller can pass
page frames to lk_rq_map_user to just set up a request and bios with
page frames propely. bio_uncopy_user (called via blk_rq_unmap_user)
doesn't copy data to user space with such request.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
DEBUG_BLOCK_EXT_DEVT shuffles SCSI and IDE device numbers and root
device number set using rdev become meaningless. Root devices should
be explicitly specified using textual names. Warn about it if root
can't be found and DEBUG_BLOCK_EXT_DEVT is enabled. Also, add warning
to the help text.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
bdget_disk() and blk_lookup_devt() never cared whether the specified
partition (or disk) is zero sized or not. I got confused while
converting those not to depend on consecutive minor numbers in commit
5a6411b1178baf534aa9138052864dfa89d3eada and later when dev0 was added
it broke callers which expected to get valid return for zero sized
disk devices.
So, they never needed nr_sects checks in the first place. Kill them.
This problem was spotted and debugged by Bartlmoiej Zolnierkiewicz.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
It's a debug option that you would explicitly enable to test this
feature, we should default it to 'n' to prevent accidental surprises
for now.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Noticed by sparse:
block/blk-softirq.c:156:12: warning: symbol 'blk_softirq_init' was not declared. Should it be static?
block/genhd.c:583:28: warning: function 'bdget_disk' with external linkage has definition
block/genhd.c:659:17: warning: incorrect type in argument 1 (different base types)
block/genhd.c:659:17: expected unsigned int [unsigned] [usertype] size
block/genhd.c:659:17: got restricted gfp_t
block/genhd.c:659:29: warning: incorrect type in argument 2 (different base types)
block/genhd.c:659:29: expected restricted gfp_t [usertype] flags
block/genhd.c:659:29: got unsigned int
block: kmalloc args reversed
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This adds blk_rq_aligned helper function to see if alignment and
padding requirement is satisfied for DMA transfer. This also converts
blk_rq_map_kern and __blk_rq_map_user to use the helper function.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
bio_copy_kern and bio_copy_user are very similar. This converts
bio_copy_kern to use bio_copy_user.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch converts the indirect IO path (including mmap IO and old
struct sg_header) to use the block layer functions (blk_get_request,
blk_execute_rq_nowait, blk_rq_map_user, etc) instead of
scsi_execute_async().
[Jens: fixed compile error with SCSI logging enabled]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch converts the direct IO path (SG_FLAG_DIRECT_IO) to use the
block layer functions (blk_get_request, blk_execute_rq_nowait,
blk_rq_map_user, etc) instead of scsi_execute_async().
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch converts the non data path to use the block layer functions
(blk_get_request, blk_execute_rq_nowait, etc) instead of uses
scsi_execute_async().
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch introduces struct rq_map_data to enable bio_copy_use_iov()
use reserved pages.
Currently, bio_copy_user_iov allocates bounce pages but
drivers/scsi/sg.c wants to allocate pages by itself and use
them. struct rq_map_data can be used to pass allocated pages to
bio_copy_user_iov.
The current users of bio_copy_user_iov simply passes NULL (they don't
want to use pre-allocated pages).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Douglas Gilbert <dougg@torque.net>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Currently, blk_rq_map_user and blk_rq_map_user_iov always do
GFP_KERNEL allocation.
This adds gfp_mask argument to blk_rq_map_user and blk_rq_map_user_iov
so sg can use it (sg always does GFP_ATOMIC allocation).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
CFQ's detection of queueing devices assumes a non-queuing device and detects
if the queue depth reaches a certain threshold. Under some workloads (e.g.
synchronous reads), CFQ effectively forces a unit queue depth, thus defeating
the detection logic. This leads to poor performance on queuing hardware,
since the idle window remains enabled.
This patch inverts the sense of the logic: assume a queuing-capable device,
and detect if the depth does not exceed the threshold.
Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We should just check for rq->bio, as that is really the information
we are looking for. Even if the bio attached doesn't carry data,
we still need to do IO post processing on it.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Somewhat incomplete, as we do allow merges of requests and bios
that have different completion CPUs given. This is done on the
assumption that a larger IO is still more beneficial than CPU
locality.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch adds support for controlling the IO completion CPU of
either all requests on a queue, or on a per-request basis. We export
a sysfs variable (rq_affinity) which, if set, migrates completions
of requests to the CPU that originally submitted it. A bio helper
(bio_set_completion_cpu()) is also added, so that queuers can ask
for completion on that specific CPU.
In testing, this has been show to cut the system time by as much
as 20-40% on synthetic workloads where CPU affinity is desired.
This requires a little help from the architecture, so it'll only
work as designed for archs that are using the new generic smp
helper infrastructure.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Now that disk and partition handlings are mostly unified, it's easy to
allow disk to have extended device number. This patch makes
add_disk() use extended device number if disk->minors is zero. Both
sd and ide-disk are updated to use this.
* sd_format_disk_name() is implemented which can generically determine
the drive name. This removes disk number restriction stemming from
limited device names.
* If sd index goes over SD_MAX_DISKS (which can be increased now BTW),
sd simply doesn't initialize minors letting block layer choose
extended device number.
* If CONFIG_DEBUG_EXT_DEVT is set, both sd and ide-disk always set
minors to 0 and use extended device numbers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
With previous changes, it's meaningless to limit the number of
partitions. Replace @ext_minors with GENHD_FL_EXT_DEVT such that
setting the flag allows the disk to have maximum number of allowed
partitions (only limited by the number of entries in parsed_partitions
as determined by MAX_PART constant).
This kills not-too-pretty alloc_disk_ext[_node]() functions and makes
@minors parameter to alloc_disk[_node]() unnecessary. The parameter
is left alone to avoid disturbing the users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
disk->__part used to be statically allocated to the maximum possible
number of partitions. This patch makes partition array allocation
dynamic. The added overhead is minimal as only real change is one
memory dereference changed to RCU one. This saves both a bit of
memory and cpu cycles iterating through unoccupied slots and makes
increasing partition limit easier.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Move stats related fields - stamp, in_flight, dkstats - from disk to
part0 and unify stat handling such that...
* part_stat_*() now updates part0 together if the specified partition
is not part0. ie. part_stat_*() are now essentially all_stat_*().
* {disk|all}_stat_*() are gone.
* part_round_stats() is updated similary. It handles part0 stats
automatically and disk_round_stats() is killed.
* part_{inc|dec}_in_fligh() is implemented which automatically updates
part0 stats for parts other than part0.
* disk_map_sector_rcu() is updated to return part0 if no part matches.
Combined with the above changes, this makes NULL special case
handling in callers unnecessary.
* Separate stats show code paths for disk are collapsed into part
stats show code paths.
* Rename disk_stat_lock/unlock() to part_stat_lock/unlock()
While at it, reposition stat handling macros a bit and add missing
parentheses around macro parameters.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
GENHD_FL_FAIL for disk is what make_it_fail is for parts. Kill it and
use part0->make_it_fail. Sysfs node handling is unified too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Till now, bdev->bd_part is set only if the bdev was for parts other
than part0. This patch makes bdev->bd_part always set so that code
paths don't have to differenciate common handling.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Move disk->holder_dir to part0->holder_dir. Kill now mostly
superflous bdev_get_holder().
While at it, kill superflous kobject_get/put() around holder_dir,
slave_dir and cmd_filter creation and collapse
disk_sysfs_add_subdirs() into register_disk(). These serve no purpose
but obfuscating the code.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Now that capacity and __dev are moved to part0, part0 and others can
share the same method.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Move disk->__dev to part0->__dev. This simplifies bdget_disk() and
lookup_devt() and allows common sysfs attributes to be unified.
part_to_disk() is updated to handle part0 -> disk.
Updated to include a fix from Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
he writes:
"part0 is a "special" partition and doesn't need to have capacity set - this
fixes regression caused by "block: move __dev from disk to part0" commit."
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Move disk->capacity to part0->nr_sects and convert all users who
directly accessed the field to use {get|set}_capacity(). This is done
early to allow the __dev field to be moved.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
genhd and partition code handled disk and partitions separately. All
information about the whole disk was in struct genhd and partitions in
struct hd_struct. However, the whole disk (part0) and other
partitions have a lot in common and the data structures end up having
good number of common fields and thus separate code paths doing the
same thing. Also, the partition array was indexed by partno - 1 which
gets pretty confusing at times.
This patch introduces partition 0 and makes the partition array
indexed by partno. Following patches will unify the handling of disk
and parts piece-by-piece.
This patch also implements disk_partitionable() which tests whether a
disk is partitionable. With coming dynamic partition array change,
the most common usage of disk_max_parts() will be testing whether a
disk is partitionable and the number of max partitions will become
much less important.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Implement {disk|part}_to_dev() and use them to access generic device
instead of directly dereferencing {disk|part}->dev. To make sure no
user is left behind, rename generic devices fields to __dev.
This is in preparation of unifying partition 0 handling with other
partitions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Extended devt introduces non-contiguos device numbers. This patch
implements a debug option which forces most devt allocations to be
from the extended area and spreads them out. This is enabled by
default if DEBUG_KERNEL is set and achieves...
1. Detects code paths in kernel or userland which expect predetermined
consecutive device numbers.
2. When something goes wrong, avoid corruption as adding to the minor
of earlier partition won't lead to the wrong but valid device.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Update sd and ide-disk such that they can take advantage of extended
minors.
ide-disk already has 64 minors per device and currently doesn't use
extended minors although after this patch it can be turned on by
simply tweaking constants.
sd only had 16 minors per device causing problems on certain peculiar
configurations. This patch lifts the restriction and enables it to
use upto 64 minors.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
With extended minors and the soon-to-follow debug feature, large minor
numbers for block devices will be common. This patch does the
followings to make printouts pretty.
* Adapt print formats such that large minors don't break the
formatting.
* For extended MAJ:MIN, %02x%02x for MAJ:MIN used in
printk_all_partitions() doesn't cut it anymore. Update it such that
%03x:%05x is used if either MAJ or MIN doesn't fit in %02x.
* Implement ext_range sysfs attribute which shows total minors the
device can use including both conventional minor space and the
extended one.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Implement extended device numbers. A block driver can tell block
layer that it wants to use extended device numbers. After the usual
minor space is used up, block layer automatically allocates devt's
from EXT_BLOCK_MAJOR.
Currently only one major number is allocated for this but as the
allocation is strictly on-demand, ~1mil minor space under it should
suffice unless the system actually has more than ~1mil partitions and
if that ever happens adding more majors to the extended devt area is
easy.
Due to internal implementation issues, the first partition can't be
allocated on the extended area. In other words, genhd->minors should
at least be 1. This limitation will be lifted by later changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
There are two variants of stat functions - ones prefixed with double
underbars which don't care about preemption and ones without which
disable preemption before manipulating per-cpu counters. It's unclear
whether the underbarred ones assume that preemtion is disabled on
entry as some callers don't do that.
This patch unifies diskstats access by implementing disk_stat_lock()
and disk_stat_unlock() which take care of both RCU (for partition
access) and preemption (for per-cpu counter access). diskstats access
should always be enclosed between the two functions. As such, there's
no need for the versions which disables preemption. They're removed
and double underbars ones are renamed to drop the underbars. As an
extra argument is added, there's no danger of using the old version
unconverted.
disk_stat_lock() uses get_cpu() and returns the cpu index and all
diskstat functions which access per-cpu counters now has @cpu
argument to help RT.
This change adds RCU or preemption operations at some places but also
collapses several preemption ops into one at others. Overall, the
performance difference should be negligible as all involved ops are
very lightweight per-cpu ones.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
disk->part[] is protected by its matching bdev's lock. However,
non-critical accesses like collecting stats and printing out sysfs and
proc information used to be performed without any locking. As
partitions can come and go dynamically, partitions can go away
underneath those non-critical accesses. As some of those accesses are
writes, this theoretically can lead to silent corruption.
This patch fixes the race by using RCU for the partition array and dev
reference counter to hold partitions.
* Rename disk->part[] to disk->__part[] to make sure no one outside
genhd layer proper accesses it directly.
* Use RCU for disk->__part[] dereferencing.
* Implement disk_{get|put}_part() which can be used to get and put
partitions from gendisk respectively.
* Iterators are implemented to help iterate through all partitions
safely.
* Functions which require RCU readlock are marked with _rcu suffix.
* Use disk_put_part() in __blkdev_put() instead of directly putting
the contained kobject.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Implement disk_devt() and part_devt() and use them to directly
access devt instead of computing it from ->major and ->first_minor.
Note that all references to ->major and ->first_minor outside of
block layer is used to determine devt of the disk (the part0) and as
->major and ->first_minor will continue to represent devt for the
disk, converting these users aren't strictly necessary. However,
convert them for consistency.
* Implement disk_max_parts() to avoid directly deferencing
genhd->minors.
* Update bdget_disk() such that it doesn't assume consecutive minor
space.
* Move devt computation from register_disk() to add_disk() and make it
the only one (all other usages use the initially determined value).
These changes clean up the code and will help disk->part dereference
fix and extended block device numbers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe