Commit Graph

79 Commits

Author SHA1 Message Date
Al Viro 31b140398c switch {__,}blockdev_direct_IO() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:46 -04:00
Al Viro a6cbcd4a4a get rid of pointless iov_length() in ->direct_IO()
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:45 -04:00
Al Viro d8d3d94b80 pass iov_iter to ->direct_IO()
unmodified, for now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:44 -04:00
Johannes Weiner 91b0abe36a mm + fs: store shadow entries in page cache
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:01 -07:00
Kirill A. Shutemov 7caef26767 truncate: drop 'oldsize' truncate_pagecache() parameter
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression").  Let's drop it.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:02 -07:00
Vyacheslav Dubeyko e5f7f84843 ] nilfs2: use atomic64_t type for inodes_count and blocks_count fields in nilfs_root struct
The cp_inodes_count and cp_blocks_count are represented as __le64 type in
on-disk structure (struct nilfs_checkpoint).  But analogous fields in
in-core structure (struct nilfs_root) are represented by atomic_t type.

This patch replaces atomic_t on atomic64_t type in representation of
inodes_count and blocks_count fields in struct nilfs_root.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Joern Engel <joern@logfs.org>
Cc: Clemens Eisserer <linuxhippy@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:08:01 -07:00
Ryusuke Konishi 136e8770cd nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary
nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary

DESCRIPTION:
 There are use-cases when NILFS2 file system (formatted with block size
lesser than 4 KB) can be remounted in RO mode because of encountering of
"broken bmap" issue.

The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>:
 "The machine I've been trialling nilfs on is running Debian Testing,
  Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc
  version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've
  also reproduced it (identically) with Debian Unstable amd64 and Debian
  Experimental (using the 3.8-trunk kernel).  The problematic partitions
  were formatted with "mkfs.nilfs2 -b 1024 -B 8192"."

SYMPTOMS:
(1) System log contains error messages likewise:

    [63102.496756] nilfs_direct_assign: invalid pointer: 0
    [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)
    [63102.496798]
    [63102.524403] Remounting filesystem read-only

(2) The NILFS2 file system is remounted in RO mode.

REPRODUSING PATH:
(1) Create volume group with name "unencrypted" by means of vgcreate utility.
(2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>):

----------------[BEGIN SCRIPT]--------------------

VG=unencrypted
lvcreate --size 2G --name ntest $VG
mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest
mkdir /var/tmp/n
mkdir /var/tmp/n/ntest
mount /dev/mapper/$VG-ntest /var/tmp/n/ntest
mkdir /var/tmp/n/ntest/thedir
cd /var/tmp/n/ntest/thedir
sleep 2
date
darcs init
sleep 2
dmesg|tail -n 5
date
darcs whatsnew || true
date
sleep 2
dmesg|tail -n 5
----------------[END SCRIPT]--------------------

REPRODUCIBILITY: 100%

INVESTIGATION:
As it was discovered, the issue takes place during segment
construction after executing such sequence of user-space operations:

  open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7
  fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
  ftruncate(7, 60)

The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken
bmap (inode number=28)" takes place because of trying to get block
number for third block of the file with logical offset #3072 bytes.  As
it is possible to see from above output, the file has 60 bytes of the
whole size.  So, it is enough one block (1 KB in size) allocation for
the whole file.  Trying to operate with several blocks instead of one
takes place because of discovering several dirty buffers for this file
in nilfs_segctor_scan_file() method.

The root cause of this issue is in nilfs_set_page_dirty function which
is called just before writing to an mmapped page.

When nilfs_page_mkwrite function handles a page at EOF boundary, it
fills hole blocks only inside EOF through __block_page_mkwrite().

The __block_page_mkwrite() function calls set_page_dirty() after filling
hole blocks, thus nilfs_set_page_dirty function (=
a_ops->set_page_dirty) is called.  However, the current implementation
of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page
at EOF boundary.

As a result, buffers outside EOF are inconsistently marked dirty and
queued for write even though they are not mapped with nilfs_get_block
function.

FIX:
This modifies nilfs_set_page_dirty() not to mark hole blocks dirty.

Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals
for this issue.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk>
Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-24 16:22:52 -07:00
Kent Overstreet a27bb332c0 aio: don't include aio.h in sched.h
Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 20:16:25 -07:00
Vyacheslav Dubeyko eb53b6db7a nilfs2: remove unneeded test in nilfs_writepage()
page->mapping->host cannot be NULL in nilfs_writepage(), so remove the
unneeded test.

The fixes the smatch warning: "fs/nilfs2/inode.c:211 nilfs_writepage()
error: we previously assumed 'inode' could be null (see line 195)".

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:05 -07:00
Vyacheslav Dubeyko 8c26c4e269 nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption
The NILFS2 driver remounts itself in RO mode in the case of discovering
metadata corruption (for example, discovering a broken bmap).  But
usually, this takes place when there have been file system operations
before remounting in RO mode.

Thereby, NILFS2 driver can be in RO mode with presence of dirty pages in
modified inodes' address spaces.  It results in flush kernel thread's
infinite trying to flush dirty pages in RO mode.  As a result, it is
possible to see such side effects as: (1) flush kernel thread occupies
50% - 99% of CPU time; (2) system can't be shutdowned without manual
power switch off.

SYMPTOMS:
(1) System log contains error message: "Remounting filesystem read-only".
(2) The flush kernel thread occupies 50% - 99% of CPU time.
(3) The system can't be shutdowned without manual power switch off.

REPRODUCTION PATH:
(1) Create volume group with name "unencrypted" by means of vgcreate utility.
(2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>):

  ----------------[BEGIN SCRIPT]--------------------
  #!/bin/bash

  VG=unencrypted
  #apt-get install nilfs-tools darcs
  lvcreate --size 2G --name ntest $VG
  mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest
  mkdir /var/tmp/n
  mkdir /var/tmp/n/ntest
  mount /dev/mapper/$VG-ntest /var/tmp/n/ntest
  mkdir /var/tmp/n/ntest/thedir
  cd /var/tmp/n/ntest/thedir
  sleep 2
  date
  darcs init
  sleep 2
  dmesg|tail -n 5
  date
  darcs whatsnew || true
  date
  sleep 2
  dmesg|tail -n 5
  ----------------[END SCRIPT]--------------------

(3) Try to shutdown the system.

REPRODUCIBILITY: 100%

FIX:

This patch implements checking mount state of NILFS2 driver in
nilfs_writepage(), nilfs_writepages() and nilfs_mdt_write_page()
methods.  If it is detected the RO mount state then all dirty pages are
simply discarded with warning messages is written in system log.

[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Anthony Doggett <Anthony2486@interfaces.org.uk>
Cc: ARAI Shun-ichi <hermes@ceres.dti.ne.jp>
Cc: Piotr Szymaniak <szarpaj@grubelek.pl>
Cc: Zahid Chowdhury <zahid.chowdhury@starsolutions.com>
Cc: Elmer Zhang <freeboy6716@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:04 -07:00
Marco Stornelli 2d1b399b22 nilfs2: drop vmtruncate
Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-20 18:40:54 -05:00
Eric W. Biederman 305d3d0dbc userns: Convert nillfs2 to use kuid/kgid where appropriate
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21 03:13:15 -07:00
Vyacheslav Dubeyko f5974c8f8c nilfs2: add omitted comments for different structures in driver implementation
Add omitted comments for different structures in driver implementation.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:19 -07:00
Jan Kara dbd5768f87 vfs: Rename end_writeback() to clear_inode()
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:41 +08:00
Al Viro c6e49e3f26 nilfs: propagate umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:04 -05:00
Miklos Szeredi bfe8684869 filesystems: add set_nlink()
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:43 +01:00
Miklos Szeredi 6d6b77f163 filesystems: add missing nlink wrappers
Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2011-11-02 12:53:43 +01:00
Christoph Hellwig aacfc19c62 fs: simplify the blockdev_direct_IO prototype
Simple filesystems always pass inode->i_sb_bdev as the block device
argument, and never need a end_io handler.  Let's simply things for
them and for my grepping activity by dropping these arguments.  The
only thing not falling into that scheme is ext4, which passes and
end_io handler without needing special flags (yet), but given how
messy the direct I/O code there is use of __blockdev_direct_IO
in one instead of two out of three cases isn't going to make a large
difference anyway.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:49 -04:00
Christoph Hellwig 562c72aa57 fs: move inode_dio_wait calls into ->setattr
Let filesystems handle waiting for direct I/O requests themselves instead
of doing it beforehand.  This means filesystem-specific locks to prevent
new dio referenes from appearing can be held.  This is important to allow
generalizing i_dio_count to non-DIO_LOCKING filesystems.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:47 -04:00
Al Viro 10556cb21a ->permission() sanitizing: don't pass flags to ->permission()
not used by the instances anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:24 -04:00
Al Viro 2830ba7f34 ->permission() sanitizing: don't pass flags to generic_permission()
redundant; all callers get it duplicated in mask & MAY_NOT_BLOCK and none of
them removes that bit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:22 -04:00
Al Viro 178ea73521 kill check_acl callback of generic_permission()
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:16 -04:00
Al Viro 730e908f35 nilfs2_permission() doesn't need to bail out in RCU mode
Nothing blocking except for generic_permission().  Which will DTRT.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-06-20 10:44:33 -04:00
Christoph Hellwig aa38572954 fs: pass exact type of data dirties to ->dirty_inode
Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or
anything else, so that the filesystem can track internally if it
needs to push out a transaction for fdatasync or not.

This is just the prototype change with no user for it yet.  I plan
to push large XFS changes for the next merge window, and getting
this trivial infrastructure in this window would help a lot to avoid
tree interdependencies.

Also remove incorrect comments that ->dirty_inode can't block.  That
has been changed a long time ago, and many implementations rely on it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-27 07:04:40 -04:00
Ryusuke Konishi 5fc7b14177 nilfs2: use mark_buffer_dirty to mark btnode or meta data dirty
This replaces nilfs_mdt_mark_buffer_dirty and nilfs_btnode_mark_dirty
macros with mark_buffer_dirty and gets rid of nilfs_mark_buffer_dirty,
an own mark buffer dirty function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10 22:21:57 +09:00
Ryusuke Konishi 0ef28f9aec nilfs2: get rid of NILFS_I_NILFS
This replaces all references of NILFS_I_NILFS(inode)->ns_bdev with
inode->i_sb->s_bdev and unfolds remaining uses of NILFS_I_NILFS inline
function.

Before 2.6.37, referring to a nilfs object from inodes needed a
conditional judgement, and NILFS_I_NILFS was helpful to simplify it.
But now we can simply do it by going through a super block instance
like inode->i_sb->s_fs_info.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10 22:21:56 +09:00
Ryusuke Konishi 56eb553885 nilfs2: zero fill unused portion of super root block
The super root block is newly-allocated each time it is written back
to disk, so unused portion of the block should be cleared.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10 22:21:45 +09:00
Nicolas Kaiser eaae0f37d8 nilfs2: merge list_del()/list_add_tail() to list_move_tail()
Merge list_del() + list_add_tail() to list_move_tail().

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10 22:21:44 +09:00
Linus Torvalds 6c51038900 Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
  Documentation/iostats.txt: bit-size reference etc.
  cfq-iosched: removing unnecessary think time checking
  cfq-iosched: Don't clear queue stats when preempt.
  blk-throttle: Reset group slice when limits are changed
  blk-cgroup: Only give unaccounted_time under debug
  cfq-iosched: Don't set active queue in preempt
  block: fix non-atomic access to genhd inflight structures
  block: attempt to merge with existing requests on plug flush
  block: NULL dereference on error path in __blkdev_get()
  cfq-iosched: Don't update group weights when on service tree
  fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
  block: Require subsystems to explicitly allocate bio_set integrity mempool
  jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  fs: make fsync_buffers_list() plug
  mm: make generic_writepages() use plugging
  blk-cgroup: Add unaccounted time to timeslice_used.
  block: fixup plugging stubs for !CONFIG_BLOCK
  block: remove obsolete comments for blkdev_issue_zeroout.
  blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
  ...

Fix up conflicts in fs/{aio.c,super.c}
2011-03-24 10:16:26 -07:00
Jens Axboe 7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Ryusuke Konishi e3154e9748 nilfs2: get rid of nilfs_sb_info structure
This directly uses sb->s_fs_info to keep a nilfs filesystem object and
fully removes the intermediate nilfs_sb_info structure.  With this
change, the hierarchy of on-memory structures of nilfs will be
simplified as follows:

Before:
  super_block
       -> nilfs_sb_info
             -> the_nilfs
                   -> cptree --+-> nilfs_root (current file system)
                               +-> nilfs_root (snapshot A)
                               +-> nilfs_root (snapshot B)
                               :
             -> nilfs_sc_info (log writer structure)
After:
  super_block
       -> the_nilfs
             -> cptree --+-> nilfs_root (current file system)
                         +-> nilfs_root (snapshot A)
                         +-> nilfs_root (snapshot B)
                         :
             -> nilfs_sc_info (log writer structure)

The reason why we didn't design so from the beginning is because the
initial shape also differed from the above.  The early hierachy was
composed of "per-mount-point" super_block -> nilfs_sb_info pairs and a
shared nilfs object.  On the kernel 2.6.37, it was changed to the
current shape in order to unify super block instances into one per
device, and this cleanup became applicable as the result.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09 11:54:26 +09:00
Ryusuke Konishi 9b1fc4e497 nilfs2: move next generation counter into nilfs object
Moves s_next_generation counter and a spinlock protecting it to nilfs
object from nilfs_sb_info structure.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09 11:05:08 +09:00
Ryusuke Konishi 693dd32122 nilfs2: move s_inode_lock and s_dirty_files into nilfs object
Moves s_inode_lock spinlock and s_dirty_files list to nilfs object
from nilfs_sb_info structure.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09 11:05:07 +09:00
Ryusuke Konishi be667377a8 nilfs2: record used amount of each checkpoint in checkpoint list
This records the number of used blocks per checkpoint in each
checkpoint entry of cpfile.  Even though userland tools can get the
block count via nilfs_get_cpinfo ioctl, it was not updated by the
nilfs2 kernel code.  This fixes the issue and makes it available for
userland tools to calculate used amount per checkpoint.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
2011-03-08 14:58:31 +09:00
Ryusuke Konishi b253a3e4f2 nilfs2: tighten restrictions on inode flags
Nilfs has few rectrictions on which flags may be set on which inodes
like ext2/3/4 filesystems used to be.  Specifically DIRSYNC may only
be set on directories and IMMUTABLE and APPEND may not be set on
links.  Tighten that to disallow TOPDIR being set on non-directories
and only NODUMP and NOATIME to be set on non-regular file,
non-directories.

This introduces a flags masking function like those of extN and uses
it during inode creation.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08 14:58:29 +09:00
Ryusuke Konishi 32f4aeb315 nilfs2: mark S_NOATIME on inodes only if NOATIME attribute is set
At present, nilfs marks S_NOATIME flag on all inodes.  This restricts
nilfs_set_inode_flags function so that it marks S_NOATIME only if a
given inode has an FS_NOATIME_FL flag.

Although nilfs does not support atime yet, touch_atime() still safely
returns on IS_NOATIME check since MS_NOATIME is always set on sb.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08 14:58:29 +09:00
Ryusuke Konishi f0c9f242f9 nilfs2: use common file attribute macros
Replaces uses of own inode flags (i.e. NILFS_SECRM_FL, NILFS_UNRM_FL,
NILFS_COMPR_FL, and so forth) with common inode flags, and removes the
own flag declarations.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08 14:58:29 +09:00
Ryusuke Konishi 25b18d39cc nilfs2: decrement inodes count only if raw inode was successfully deleted
This fixes the issue that inodes count will not add up after removal
of raw inodes fails.  Hence, this prevents possible under flow of the
inodes count.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08 14:58:04 +09:00
Ryusuke Konishi 365e215ce1 nilfs2: unfold nilfs_dat_inode function
nilfs_dat_inode function was a wrapper to switch between normal dat
inode and gcdat, a clone of the dat inode for garbage collection.

This function got obsolete when the gcdat inode was removed, and now
we can access the dat inode directly from a nilfs object.  So, we will
unfold the wrapper and remove it.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10 14:38:39 +09:00
Ryusuke Konishi bcbc8c648d nilfs2: do not pass sbi to functions which can get it from inode
This removes argument for passing nilfs_sb_info structure from
nilfs_set_file_dirty and nilfs_load_inode_block functions.  We can get
a pointer to the structure from inodes.

[Stephen Rothwell <sfr@canb.auug.org.au>: fix conflict with commit
 b74c79e993]

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10 14:37:54 +09:00
Ryusuke Konishi 622daaff0a nilfs2: fiemap support
This adds fiemap to nilfs.  Two new functions, nilfs_fiemap and
nilfs_find_uncommitted_extent are added.

nilfs_fiemap() implements the fiemap inode operation, and
nilfs_find_uncommitted_extent() helps to get a range of data blocks
whose physical location has not been determined.

nilfs_fiemap() collects extent information by looping through
nilfs_bmap_lookup_contig and nilfs_find_uncommitted_extent routines.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10 14:05:46 +09:00
Ryusuke Konishi 27e6c7a3ce nilfs2: mark buffer heads as delayed until the data is written to disk
Nilfs does not allocate new blocks on disk until they are actually
written to.  To implement fiemap, we need to deal with such blocks.

To allow successive fiemap patch to distinguish mapped but unallocated
regions, this marks buffer heads of those new blocks as delayed and
clears the flag after the blocks are written to disk.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10 14:05:45 +09:00
Ryusuke Konishi e828949e5b nilfs2: call nilfs_error inside bmap routines
Some functions using nilfs bmap routines can wrongly return invalid
argument error (i.e. -EINVAL) that bmap returns as an internal code
for btree corruption.

This fixes the issue by catching and converting the internal EINVAL to
EIO and calling nilfs_error function inside bmap routines.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10 14:05:45 +09:00
Nick Piggin b74c79e993 fs: provide rcu-walk aware permission i_ops
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:29 +11:00
Ryusuke Konishi 032dbb3b50 nilfs2: see state of root dentry for mount check of snapshots
After applied the patch that unified sb instances, root dentry of
snapshots can be left in dcache even after their trees are unmounted.

The orphan root dentry/inode keeps a root object, and this causes
false positive of nilfs_checkpoint_is_mounted function.

This resolves the issue by having nilfs_checkpoint_is_mounted test
whether the root dentry is busy or not.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23 09:24:38 +09:00
Ryusuke Konishi f1e89c86fd nilfs2: use iget for all metadata files
This makes use of iget5_locked to allocate or get inode for metadata
files to stop using own inode allocator.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23 09:24:38 +09:00
Ryusuke Konishi 518d1a6a1d nilfs2: allow nilfs_clear_inode to clear metadata file inodes
Allows clear inode function (nilfs_clear_inode) to handle metadata
files that uses bitmap-based object alloctor.  DAT and ifile
correspond to this.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23 09:24:37 +09:00
Ryusuke Konishi dc3d3b810a nilfs2: deny write access to inodes in snapshots
Snapshots of nilfs are read-only.

After super block instances (sb) will be unified, nilfs will need to
check write access by a way other than implicit test with
IS_RDONLY(inode).  This is because IS_RDONLY() refers to MS_RDONLY bit
of inode->i_sb->s_flags and it will become inaccurate after the
unification of sb.

To prepare for the issue, this uses i_op->permission to deny write
access to inodes in snapshots.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23 09:24:35 +09:00
Ryusuke Konishi b7c0634204 nilfs2: move inode count and block count into root object
This moves sbi->s_inodes_count and sbi->s_blocks_count into nilfs_root
object.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23 09:24:35 +09:00
Ryusuke Konishi e912a5b668 nilfs2: use root object to get ifile
This rewrites functions using ifile so that they get ifile from
nilfs_root object, and will remove sbi->s_ifile.  Some functions that
don't know the root object are extended to receive it from caller.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23 09:24:35 +09:00