Change fpga_mgr_register to not set or use drvdata. This supports
the case where a PCIe device has more than one manager.
Add fpga_mgr_create/free functions. Change fpga_mgr_register and
fpga_mgr_unregister functions to take the mgr struct as their only
parameter.
struct fpga_manager *fpga_mgr_create(struct device *dev,
const char *name,
const struct fpga_manager_ops *mops,
void *priv);
void fpga_mgr_free(struct fpga_manager *mgr);
int fpga_mgr_register(struct fpga_manager *mgr);
void fpga_mgr_unregister(struct fpga_manager *mgr);
Update the drivers that call fpga_mgr_register with the new API.
Signed-off-by: Alan Tull <atull@kernel.org>
[Moritz: Fixup whitespace issue]
Reported-by: Jiuyue Ma <majiuyue@huawei.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver is a logical device which provides an
interface between the hypervisor and a management
partition. This interface is like a message
passing interface. This management partition
is intended to provide an alternative to HMC-based
system management.
VMC enables the Management LPAR to provide basic
logical partition functions:
- Logical Partition Configuration
- Boot, start, and stop actions for individual
partitions
- Display of partition status
- Management of virtual Ethernet
- Management of virtual Storage
- Basic system management
This driver is to be used for the POWER Virtual
Management Channel Virtual Adapter on the PowerPC
platform. It provides a character device which
allows for both request/response and async message
support through the /dev/ibmvmc node.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Reviewed-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Reviewed-by: Adam Reznechek <adreznec@linux.vnet.ibm.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Taylor Jakobson <tjakobs@us.ibm.com>
Tested-by: Brad Warrum <bwarrum@us.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver prints pcsr twice: the first time it uses specifier %px to
print hexadecimal pcsr value and the second time uses specifier %pS for
output kernel symbols.
As suggested by Kees, using %pS should be sufficient and %px isn't
necessary; the reason is if the pcsr is a kernel space address, we can
easily get to know the code line from %pS format, on the other hand, if
the pcsr value doesn't fall into kernel space range (e.g. if the CPU is
stuck in firmware), %pS also gives out pcsr hexadecimal value.
So this commit removes useless %px and update section "Output format"
in the document for alignment between the code and document.
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In 4.9 kernel, the sysfs files for Hyper-V VMBus changed name but
the documentation files were not updated. The current sysfs file
names are /sys/bus/vmbus/devices/<UUID>/...
See commit 9a56e5d6a0ba ("Drivers: hv: make VMBus bus ids persistent")
and commit f6b2db084b ("vmbus: make sysfs names consistent with PCI")
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This contains:
- Support for SoundWire Streaming
- Documentation updates for streaming
- Cadence and Intel driver updates for streaming
- ASoC API for programming soundwire stream
-----BEGIN PGP SIGNATURE-----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=KZwI
-----END PGP SIGNATURE-----
Merge tag 'soundwire-streaming' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire streaming
This contains:
- Support for SoundWire Streaming
- Documentation updates for streaming
- Cadence and Intel driver updates for streaming
- ASoC API for programming soundwire stream
Pull timer fixes from Thomas Gleixner:
"Two fixes from the timer departement:
- Fix a long standing issue in the NOHZ tick code which causes RB
tree corruption, delayed timers and other malfunctions. The cause
for this is code which modifies the expiry time of an enqueued
hrtimer.
- Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to
regression reports. Seems userspace _is_ relying on the documented
behaviour despite our hope that it wont"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
tick/sched: Do not mess with an enqueued hrtimer
Pull i2c fixes from Wolfram Sang:
- two driver fixes
- better parameter check for the core
- Documentation updates
- part of a tree-wide HAS_DMA cleanup
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sprd: Fix the i2c count issue
i2c: sprd: Prevent i2c accesses after suspend is called
i2c: dev: prevent ZERO_SIZE_PTR deref in i2cdev_ioctl_rdwr()
Documentation/i2c: adopt kernel commenting style in examples
Documentation/i2c: sync docs with current state of i2c-tools
Documentation/i2c: whitespace cleanup
i2c: Remove depends on HAS_DMA in case of platform dependency
ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJa44lQAAoJEED/6hsPKofo1dIH/3n9AZSWvavgL2V3j6agT8Yy
hxF4nHCFEJd5aqDNwbG9QEzivKw88r3o3mdB2XAQESB2MlCYR1jkTONm7yvVJTs/
/P9gj+DEQbCj2AgT//u3BGsAsZDKFhB9JwfmV2Mp4zDIqWFa6oCOGeq/iPVAGDcN
vUpuYeIicuH9SRoxH7de3z+BEXW0O+gCABXQtvA93FKTMz35yFTgmbDVCnvaV0zL
3B+3/4/jdbTRICW8EX6Li43+gEBUMtnVNkdqxLPTuCtDG8iuPUGfgF02gH99/9gj
hliV3Q4VUZKkSABW5AqKPe4+9rbsHCh9eL0LpHFGI9y+6LeUIOXAX4CtohR8gWE=
=W9Vz
-----END PGP SIGNATURE-----
rMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/headers/UAPI: Move DISABLE_EXITS KVM capability bits to the UAPI
kvm: apic: Flush TLB after APIC mode/address change if VPIDs are in use
arm/arm64: KVM: Add PSCI version selection API
KVM: arm/arm64: vgic: Kick new VCPU on interrupt migration
arm64: KVM: Demote SVE and LORegion warnings to debug only
MAINTAINERS: Update e-mail address for Christoffer Dall
KVM: arm/arm64: Close VMID generation race
Here are some small driver core and firmware fixes for 4.17-rc3
There's a kobject WARN() removal to make syzkaller a lot happier about
some "normal" error paths that it keeps hitting, which should reduce the
number of false-positives we have been getting recently.
There's also some fimware test and documentation fixes, and the
coredump() function signature change that needed to happen after -rc1
before drivers started to take advantage of it.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuMxrw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFpQCg1JM62/W8e6mQ4vdZNQmAzgMKMEMAniOMcVRX
/oDWXp64mYwJu+GTxnIJ
=+9Gk
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg Kroah-Hartman:
"Here are some small driver core and firmware fixes for 4.17-rc3
There's a kobject WARN() removal to make syzkaller a lot happier about
some "normal" error paths that it keeps hitting, which should reduce
the number of false-positives we have been getting recently.
There's also some fimware test and documentation fixes, and the
coredump() function signature change that needed to happen after -rc1
before drivers started to take advantage of it.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware: some documentation fixes
selftests:firmware: fixes a call to a wrong function name
kobject: don't use WARN for registration failures
firmware: Fix firmware documentation for recent file renames
test_firmware: fix setting old custom fw path back on exit, second try
test_firmware: Install all scripts
drivers: change struct device_driver::coredump() return type to void
Here are some tty and serial driver fixes for reported issues for
4.17-rc3.
Nothing major, but a number of small things:
- device tree fixes/updates for serial ports
- earlycon fixes
- n_gsm fixes
- tty core change reverted to help resolve syszkaller reports
- other serial driver small fixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuM0Vg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yksXgCgqT2E9Ah5O/uZp3yGAjRILKjX294AoI46+t3W
Xy8WA1Fw1NCMBvfvCVIv
=gBd0
-----END PGP SIGNATURE-----
Merge tag 'tty-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for reported issues for
4.17-rc3.
Nothing major, but a number of small things:
- device tree fixes/updates for serial ports
- earlycon fixes
- n_gsm fixes
- tty core change reverted to help resolve syszkaller reports
- other serial driver small fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Use __GFP_NOFAIL for tty_ldisc_get()
tty: serial: xuartps: Setup early console when uartclk is also passed
tty: Don't call panic() at tty_ldisc_init()
tty: Avoid possible error pointer dereference at tty_ldisc_restore().
dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/
tty: serial: qcom_geni_serial: Use signed variable to get IRQ
earlycon: Use a pointer table to fix __earlycon_table stride
serial: sh-sci: Document r8a77470 bindings
dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/
serial: imx: fix cached UCR2 read on software reset
serial: imx: warn user when using unsupported configuration
serial: mvebu-uart: Fix local flags handling on termios update
tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set
tty: n_gsm: Fix long delays with control frame timeouts in ADM mode
Here are 2 staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that you
pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuMyew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymXxACffYtMbj0Vg5pD0yAPqRzJ2iVMVE0AnRkp4BYQ
kXgAjDeSyrdKPUwQ7Hl2
=UNuF
-----END PGP SIGNATURE-----
Merge tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that
you pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wilc1000: fix NULL pointer exception in host_int_parse_assoc_resp_info()
staging: irda: remove remaining remants of irda code removal
Here are a number of USB driver fixes for reported problems for
4.17-rc3.
The "largest" here is a number of phy core changes for reported problems
with the -rc1 release. There's also the usual musb and xhci fixes, as
well as new device id updates. There are also some usbip fixes for
reported problems as more people start to use that code with containers.
All of these have been in linux-next with no reported issues, except the
last few new device ids, which are "obviously correct" :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuM0+g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynJ0QCfShhVDAuE1neAmu4vF9HFY8eoe3UAn1b71qRn
UJ5VIrtn1cS0bB3tPwmu
=sdc6
-----END PGP SIGNATURE-----
Merge tag 'usb-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB driver fixes for reported problems for
4.17-rc3.
The "largest" here is a number of phy core changes for reported
problems with the -rc1 release. There's also the usual musb and xhci
fixes, as well as new device id updates. There are also some usbip
fixes for reported problems as more people start to use that code with
containers.
All of these have been in linux-next with no reported issues, except
the last few new device ids, which are "obviously correct" :)"
* tag 'usb-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: musb: dsps: drop duplicate phy initialisation
USB: musb: host: prevent core phy initialisation
usb: core: phy: add the SPDX-License-Identifier and include guard
xhci: Fix Kernel oops in xhci dbgtty
usb: select USB_COMMON for usb role switch config
usb: core: phy: add missing forward declaration for "struct device"
usb: core: phy: make it a no-op if CONFIG_GENERIC_PHY is disabled
usb: core: use phy_exit during suspend if wake up is not supported
usb: core: split usb_phy_roothub_{init,alloc}
usb: core: phy: fix return value of usb_phy_roothub_exit()
usb: typec: ucsi: Increase command completion timeout value
Revert "xhci: plat: Register shutdown for xhci_plat"
usb: core: Add quirk for HP v222w 16GB Mini
Documentation: typec.rst: Use literal-block element with ascii art
usb: typec: ucsi: fix tracepoint related build error
usbip: usbip_event: fix to not print kernel pointer address
usbip: usbip_host: fix to hold parent lock for device_attach() calls
usbip: vhci_hcd: Fix usb device and sockfd leaks
usbip: vhci_hcd: check rhport before using in vhci_hub_control()
USB: Increment wakeup count on remote wakeup.
...
Revert commits
92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")
As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.
As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:
* systemd kills daemons on resume, after >WatchdogSec seconds
of suspending (Genki Sky). [Verified that that's because systemd uses
CLOCK_MONOTONIC and expects it to not include the suspend time.]
* systemd-journald misbehaves after resume:
systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
(Mike Galbraith).
* NetworkManager reports "networking disabled" and networking is broken
after resume 50% of the time (Pavel). [May be because of systemd.]
* MATE desktop dims the display and starts the screensaver right after
system resume (Pavel).
* Full system hang during resume (me). [May be due to systemd or NM or both.]
That happens on debian and open suse systems.
It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.
Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Including:
- Fixup outdated kernel-doc paths
- Slightly too short title underline
- Some typos
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dt binding documentation details for Lattice MachXO2 FPGA configuration
over Slave SPI interface.
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firmware_class.c was split into several files under
drivers/base/firmware_loader. The new main.c has the functions which
/request_firmware.rst references.
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RZ/G1C (R8A77470) SoC also has the R-Car gen2 compatible SCIF and HSCIF
ports, so document the SoC specific bindings.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using reStructuredText literal-block element with ascii-art.
That prevents the ascii art from being processed as
reStructuredText.
Reported-by: Masanari Iida <standby24x7@gmail.com>
Fixes: bdecb33af3 ("usb: typec: API for controlling USB Type-C Multiplexers")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull thermal fixes from Eduardo Valentin:
"A couple of fixes for the thermal subsystem"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
dt-bindings: thermal: Remove "cooling-{min|max}-level" properties
dt-bindings: thermal: remove no longer needed samsung thermal properties
Pull networking fixes from David Miller:
1) Unbalanced refcounting in TIPC, from Jon Maloy.
2) Only allow TCP_MD5SIG to be set on sockets in close or listen state.
Once the connection is established it makes no sense to change this.
From Eric Dumazet.
3) Missing attribute validation in neigh_dump_table(), also from Eric
Dumazet.
4) Fix address comparisons in SCTP, from Xin Long.
5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller.
6) Fix tunnel refcounting in l2tp, from Guillaume Nault.
7) Fix double list insert in team driver, from Paolo Abeni.
8) af_vsock.ko module was accidently made unremovable, from Stefan
Hajnoczi.
9) Fix reference to freed llc_sap object in llc stack, from Cong Wang.
10) Don't assume netdevice struct is DMA'able memory in virtio_net
driver, from Michael S. Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
net/smc: fix shutdown in state SMC_LISTEN
bnxt_en: Fix memory fault in bnxt_ethtool_init()
virtio_net: sparse annotation fix
virtio_net: fix adding vids on big-endian
virtio_net: split out ctrl buffer
net: hns: Avoid action name truncation
docs: ip-sysctl.txt: fix name of some ipv6 variables
vmxnet3: fix incorrect dereference when rxvlan is disabled
llc: hold llc_sap before release_sock()
MAINTAINERS: Direct networking documentation changes to netdev
atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"
net: qmi_wwan: add Wistron Neweb D19Q1
net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN"
net: stmmac: Disable ACS Feature for GMAC >= 4
net: mvpp2: Fix DMA address mask size
net: change the comment of dev_mc_init
net: qualcomm: rmnet: Fix warning seen with fill_info
tun: fix vlan packet truncation
tipc: fix infinite loop when dumping link monitor summary
tipc: fix use-after-free in tipc_nametbl_stop
...
Pull livepatching fix from Jiri Kosina:
"Shadow variable API list_head initialization fix from Petr Mladek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Allow to call a custom callback when freeing shadow variables
livepatch: Initialize shadow variables safely by a custom callback
Although we've implemented PSCI 0.1, 0.2 and 1.0, we expose either 0.1
or 1.0 to a guest, defaulting to the latest version of the PSCI
implementation that is compatible with the requested version. This is
no different from doing a firmware upgrade on KVM.
But in order to give a chance to hypothetical badly implemented guests
that would have a fit by discovering something other than PSCI 0.2,
let's provide a new API that allows userspace to pick one particular
version of the API.
This is implemented as a new class of "firmware" registers, where
we expose the PSCI version. This allows the PSCI version to be
save/restored as part of a guest migration, and also set to
any supported version if the guest requires it.
Cc: stable@vger.kernel.org #4.16
Reviewed-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On Armada 7K/8K we need to explicitly enable the register clock. This
clock is optional because not all the SoCs using this IP need it but at
least for Armada 7K/8K it is actually mandatory.
The change was done at xhci-plat level and not at a xhci-mvebu.c because,
it is expected that other SoC would have this kind of constraint.
The binding documentation is updating accordingly.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The name of the following proc/sysctl entries were incorrectly
documented:
/proc/sys/net/ipv6/conf/<interface>/max_dst_opts_number
/proc/sys/net/ipv6/conf/<interface>/max_hbt_opts_number
/proc/sys/net/ipv6/conf/<interface>/max_dst_opts_length
/proc/sys/net/ipv6/conf/<interface>/max_hbt_length
Their name was set to the name of the symbol in the .data field of the
control table instead of their .proc name.
Signed-off-by: Olivier Gayot <olivier.gayot@sigexec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of kernel currently and the max cooling state of a
CPU cooling device is found by referring to the cpufreq table instead.
Remove the unused bindings.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The example I2C code is rewritten to adopt the preferred kernel block
commenting style.
Signed-off-by: Sam Hansen <hansens@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Currently, Documentation/i2c/dev-interface describes the use of
i2c_smbus_* helper routines as static inlined functions provided by
linux/i2c-dev.h. Work has been done to refactor the linux/i2c-dev.h file
in the i2c-tools project out into its own library. As a result, these
docs have become stale.
This patch corrects the discrepancy and directs the reader to the
i2c-tools project for more information.
Signed-off-by: Sam Hansen <hansens@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This strips trailing whitespace in Documentation/i2c/dev-interface.
Signed-off-by: Sam Hansen <hansens@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
We might need to do some actions before the shadow variable is freed.
For example, we might need to remove it from a list or free some data
that it points to.
This is already possible now. The user can get the shadow variable
by klp_shadow_get(), do the necessary actions, and then call
klp_shadow_free().
This patch allows to do it a more elegant way. The user could implement
the needed actions in a callback that is passed to klp_shadow_free()
as a parameter. The callback usually does reverse operations to
the constructor callback that can be called by klp_shadow_*alloc().
It is especially useful for klp_shadow_free_all(). There we need to do
these extra actions for each found shadow variable with the given ID.
Note that the memory used by the shadow variable itself is still released
later by rcu callback. It is needed to protect internal structures that
keep all shadow variables. But the destructor is called immediately.
The shadow variable must not be access anyway after klp_shadow_free()
is called. The user is responsible to protect this any suitable way.
Be aware that the destructor is called under klp_shadow_lock. It is
the same as for the contructor in klp_shadow_alloc().
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The existing API allows to pass a sample data to initialize the shadow
data. It works well when the data are position independent. But it fails
miserably when we need to set a pointer to the shadow structure itself.
Unfortunately, we might need to initialize the pointer surprisingly
often because of struct list_head. It is even worse because the list
might be hidden in other common structures, for example, struct mutex,
struct wait_queue_head.
For example, this was needed to fix races in ALSA sequencer. It required
to add mutex into struct snd_seq_client. See commit b3defb791b
("ALSA: seq: Make ioctls race-free") and commit d15d662e89
("ALSA: seq: Fix racy pool initializations")
This patch makes the API more safe. A custom constructor function and data
are passed to klp_shadow_*alloc() functions instead of the sample data.
Note that ctor_data are no longer a template for shadow->data. It might
point to any data that might be necessary when the constructor is called.
Also note that the constructor is called under klp_shadow_lock. It is
an internal spin_lock that synchronizes alloc() vs. get() operations,
see klp_shadow_get_or_alloc(). On one hand, this adds a risk of ABBA
deadlocks. On the other hand, it allows to do some operations safely.
For example, we could add the new structure into an existing list.
This must be done only once when the structure is allocated.
Reported-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make lib/textsearch.c usable as kernel-doc.
Add textsearch() function family to kernel-api documentation.
Fix kernel-doc warnings in <linux/textsearch.h>:
../include/linux/textsearch.h:65: warning: Incorrect use of kernel-doc format:
* get_next_block - fetch next block of data
../include/linux/textsearch.h:82: warning: Incorrect use of kernel-doc format:
* finish - finalize/clean a series of get_next_block() calls
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull missed timer updates from Thomas Gleixner:
"This is a branch which got forgotten during the merge window, but it
contains only fixes and hardware enablement. No fundamental changes.
- Various fixes for the imx-tpm clocksource driver
- A new timer driver for the NCPM7xx SoC family"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/imx-tpm: Add different counter width support
clocksource/drivers/imx-tpm: Correct some registers operation flow
clocksource/drivers/imx-tpm: Fix typo of clock name
dt-bindings: timer: tpm: fix typo of clock name
clocksource/drivers/npcm: Add NPCM7xx timer driver
dt-binding: timer: document NPCM7xx timer DT bindings
There were some documentation locations that irda was mentioned, as well
as an old MAINTAINERS entry and the networking sysctl entries. Clean
these all out as this stuff really is finally gone.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tools are located at tootls/bpf/ instead of tools/net/.
Update the filter.txt doc.
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 fixes from Thomas Gleixner:
"A set of fixes and updates for x86:
- Address a swiotlb regression which was caused by the recent DMA
rework and made driver fail because dma_direct_supported() returned
false
- Fix a signedness bug in the APIC ID validation which caused invalid
APIC IDs to be detected as valid thereby bloating the CPU possible
space.
- Fix inconsisten config dependcy/select magic for the MFD_CS5535
driver.
- Fix a corruption of the physical address space bits when encryption
has reduced the address space and late cpuinfo updates overwrite
the reduced bit information with the original value.
- Dominiks syscall rework which consolidates the architecture
specific syscall functions so all syscalls can be wrapped with the
same macros. This allows to switch x86/64 to struct pt_regs based
syscalls. Extend the clearing of user space controlled registers in
the entry patch to the lower registers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix signedness bug in APIC ID validity checks
x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
x86/olpc: Fix inconsistent MFD_CS5535 configuration
swiotlb: Use dma_direct_supported() for swiotlb_ops
syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
syscalls/core, syscalls/x86: Clean up syscall stub naming convention
syscalls/x86: Extend register clearing on syscall entry to lower registers
syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
x86/syscalls: Don't pointlessly reload the system call number
x86/mm: Fix documentation of module mapping range with 4-level paging
x86/cpuid: Switch to 'static const' specifier
Pull overlayfs updates from Miklos Szeredi:
"In addition to bug fixes and cleanups there are two new features from
Amir:
- Consistent inode number support for the case when layers are not
all on the same filesystem (feature is dubbed "xino").
- Optimize overlayfs file handle decoding. This one touches the
exportfs interface to allow detecting the disconnected directory
case"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: update documentation w.r.t "xino" feature
ovl: add support for "xino" mount and config options
ovl: consistent d_ino for non-samefs with xino
ovl: consistent i_ino for non-samefs with xino
ovl: constant st_ino for non-samefs with xino
ovl: allocate anon bdev per unique lower fs
ovl: factor out ovl_map_dev_ino() helper
ovl: cleanup ovl_update_time()
ovl: add WARN_ON() for non-dir redirect cases
ovl: cleanup setting OVL_INDEX
ovl: set d->is_dir and d->opaque for last path element
ovl: Do not check for redirect if this is last layer
ovl: lookup in inode cache first when decoding lower file handle
ovl: do not try to reconnect a disconnected origin dentry
ovl: disambiguate ovl_encode_fh()
ovl: set lower layer st_dev only if setting lower st_ino
ovl: fix lookup with middle layer opaque dir and absolute path redirects
ovl: Set d->last properly during lookup
ovl: set i_ino to the value of st_ino for NFS export
for the TI Davinci family of SoCs. So far those clks have been supported
with a custom implementation of the clk API in the arch port instead of in
the CCF. With this driver merged we're one step closer to having a single
clk API implementation.
The other large diff is from the Amlogic clk driver that underwent some
major surgery to use regmap. Beyond that, the biggest hitter is Samsung
which needed some reworks to properly handle clk provider power domains
and a bunch of PLL rate updates.
The core framework was fairly quiet this round, just getting some cleanups
and small fixes for some of the more esoteric features. And the usual
set of driver non-critical fixes, cleanups, and minor additions are here as
well.
Core:
- Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
- debugfs ops macroized to shave some lines of boilerplate code
- Always calculate the phase instead of caching it in clk_get_phase()
- More __must_check on bulk clk APIs
New Drivers:
- TI's Davinci family of SoCs
- Intel's Stratix10 SoC
- stm32mp157 SoC
- Allwinner H6 CCU
- Silicon Labs SI544 clock generator chip
- Renesas R-Car M3-N and V3H SoCs
- i.MX6SLL SoCs
Removed Drivers:
- ST-Ericsson AB8540/9540
Updates:
- Mediatek MT2701 and MT7622 audsys support and MT2712 updates
- STM32F469 DSI and STM32F769 sdmmc2 support
- GPIO clks can sleep now
- Spreadtrum SC9860 RTC clks
- Nvidia Tegra MBIST workarounds and various minor fixes
- Rockchip phase handling fixes and a memory leak plugged
- Renesas drivers switch to readl/writel from clk_readl/clk_writel
- Renesas gained CPU (Z/Z2) and watchdog support
- Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
- Qualcomm PM8921 PMIC XO buffers
- Amlogic migrates to regmap APIs
- TI Keystone clk latching support
- Allwinner H3 and H5 video clk fixes
- Broadcom BCM2835 PLLs needed another bit to enable
- i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
- i.MX6UL/ULL epdc_podf support
- Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC
-----BEGIN PGP SIGNATURE-----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=ys4O
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The large diff this time around is from the addition of a new clk
driver for the TI Davinci family of SoCs. So far those clks have been
supported with a custom implementation of the clk API in the arch port
instead of in the CCF. With this driver merged we're one step closer
to having a single clk API implementation.
The other large diff is from the Amlogic clk driver that underwent
some major surgery to use regmap. Beyond that, the biggest hitter is
Samsung which needed some reworks to properly handle clk provider
power domains and a bunch of PLL rate updates.
The core framework was fairly quiet this round, just getting some
cleanups and small fixes for some of the more esoteric features. And
the usual set of driver non-critical fixes, cleanups, and minor
additions are here as well.
Core:
- Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
- debugfs ops macroized to shave some lines of boilerplate code
- Always calculate the phase instead of caching it in clk_get_phase()
- More __must_check on bulk clk APIs
New Drivers:
- TI's Davinci family of SoCs
- Intel's Stratix10 SoC
- stm32mp157 SoC
- Allwinner H6 CCU
- Silicon Labs SI544 clock generator chip
- Renesas R-Car M3-N and V3H SoCs
- i.MX6SLL SoCs
Removed Drivers:
- ST-Ericsson AB8540/9540
Updates:
- Mediatek MT2701 and MT7622 audsys support and MT2712 updates
- STM32F469 DSI and STM32F769 sdmmc2 support
- GPIO clks can sleep now
- Spreadtrum SC9860 RTC clks
- Nvidia Tegra MBIST workarounds and various minor fixes
- Rockchip phase handling fixes and a memory leak plugged
- Renesas drivers switch to readl/writel from clk_readl/clk_writel
- Renesas gained CPU (Z/Z2) and watchdog support
- Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
- Qualcomm PM8921 PMIC XO buffers
- Amlogic migrates to regmap APIs
- TI Keystone clk latching support
- Allwinner H3 and H5 video clk fixes
- Broadcom BCM2835 PLLs needed another bit to enable
- i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
- i.MX6UL/ULL epdc_podf support
- Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits)
clk: davinci: add a reset lookup table for psc0
clk: imx: add clock driver for imx6sll
dt-bindings: imx: update clock doc for imx6sll
clk: imx: add new gate/gate2 wrapper funtion
clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
clk: cs2000: set pm_ops in hibernate-compatible way
clk: bcm2835: De-assert/assert PLL reset signal when appropriate
clk: imx7d: Move clks_init_on before any clock operations
clk: imx7d: Correct ahb clk parent select
clk: imx7d: Correct dram pll type
clk: imx7d: Add USB clock information
clk: socfpga: stratix10: add clock driver for Stratix10 platform
dt-bindings: documentation: add clock bindings information for Stratix10
clk: ti: fix flag space conflict with clkctrl clocks
clk: uniphier: add additional ethernet clock lines for Pro4
clk: uniphier: add SATA clock control support
clk: uniphier: add PCIe clock control support
clk: Add driver for the si544 clock generator chip
clk: davinci: Remove redundant dev_err calls
clk: uniphier: add ethernet clock control support for PXs3
...
This set of changes adds support for more generations of the RCar
controller as well as runtime PM support. The JZ4740 driver gains
support for device tree and can now be used on all Ingenic SoCs.
Rounding things off is a random assortment of fixes and cleanups
all across the board.
-----BEGIN PGP SIGNATURE-----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=JiRM
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set of changes adds support for more generations of the RCar
controller as well as runtime PM support. The JZ4740 driver gains
support for device tree and can now be used on all Ingenic SoCs.
Rounding things off is a random assortment of fixes and cleanups all
across the board"
* tag 'pwm/for-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (29 commits)
pwm: rcar: Add suspend/resume support
pwm: rcar: Use PM Runtime to control module clock
dt-bindings: pwm: rcar: Add bindings for R-Car M3N support
pwm: rcar: Fix a condition to prevent mismatch value setting to duty
pwm: sysfs: Use put_device() instead of kfree()
dt-bindings: pwm: sunxi: Add new compatible strings
pwm: sun4i: Simplify controller mapping
pwm: sun4i: Drop unused .has_rdy member
pwm: sun4i: Properly check current state
pwm: Remove depends on AVR32
pwm: stm32: LPTimer: Use 3 cells ->of_xlate()
dt-bindings: pwm-stm32-lp: Add #pwm-cells
pwm: stm32: Protect common prescaler for all channels
pwm: stm32: Remove unused struct device
pwm: mediatek: Improve precision in rate calculation
pwm: mediatek: Remove redundant MODULE_ALIAS entries
pwm: mediatek: Fix up PWM4 and PWM5 malfunction on MT7623
pwm: jz4740: Enable for all Ingenic SoCs
pwm: jz4740: Add support for devicetree
pwm: jz4740: Implement ->set_polarity()
...
merge window while it's still open.
1. The first patch adds a new function to lockref: lockref_put_not_zero
2. The second patch fixes GFS2's glock dump code so it uses the new lockref
function. This fixes a problem whereby lock dumps could miss glocks.
3. I made a minor patch to update some comments and fix the lock ordering
text in our gfs2-glocks.txt Documentation file.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaz6pdAAoJENeLYdPf93o71wMH/0cEo34xWiScRM07EgLmZZ3q
YXMvpTvrwK+9i2u8anxiX1smezHeS+7jPrYOG8AGu3IZvKYGTDOwoIY9pxESy5gs
1Rf60s6pPE/dkTSqPaNNuBxPrM1yVyRWOPx04LxC5BCXhsS/6U2RS9ElxGDe7Nyq
P66z1wfm63+erDR7mKSuOL3Ejtglj2EPcrAupaBlRS0wjdUQ9ORyrZBpT6JMOWqd
HWjchrzWVAqx+iyLHlKZjTyPHsPaUBaj1fuv/Vcgu5sJmEJ9mF4s/GQTdwIzi8ip
ByD7MfilyrT7dxRm1uw8OJ7TvqNeaCtxsyNGGBOlSx81s/pk5Vhs8bevnczNvi8=
=jWsi
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull more gfs2 updates from Bob Peterson:
"We decided to request the latest three patches to be merged into this
merge window while it's still open.
- The first patch adds a new function to lockref:
lockref_put_not_zero
- The second patch fixes GFS2's glock dump code so it uses the new
lockref function. This fixes a problem whereby lock dumps could
miss glocks.
- I made a minor patch to update some comments and fix the lock
ordering text in our gfs2-glocks.txt Documentation file"
* tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Minor improvements to comments and documentation
gfs2: Stop using rhashtable_walk_peek
lockref: Add lockref_put_not_zero
Pull AFS updates from Al Viro:
"The AFS series posted by dhowells depended upon lookup_one_len()
rework; now that prereq is in the mainline, that series had been
rebased on top of it and got some exposure and testing..."
* 'afs-dh' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs: Do better accretion of small writes on newly created content
afs: Add stats for data transfer operations
afs: Trace protocol errors
afs: Locally edit directory data for mkdir/create/unlink/...
afs: Adjust the directory XDR structures
afs: Split the directory content defs into a header
afs: Fix directory handling
afs: Split the dynroot stuff out and give it its own ops tables
afs: Keep track of invalid-before version for dentry coherency
afs: Rearrange status mapping
afs: Make it possible to get the data version in readpage
afs: Init inode before accessing cache
afs: Introduce a statistics proc file
afs: Dump bad status record
afs: Implement @cell substitution handling
afs: Implement @sys substitution handling
afs: Prospectively look up extra files when doing a single lookup
afs: Don't over-increment the cell usage count when pinning it
afs: Fix checker warnings
vfs: Remove the const from dir_context::actor
This patch simply fixes some comments and the gfs2-glocks.txt file:
Places where i_rwsem was called i_mutex, and adding i_rw_mutex.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Alan Tull