Commit Graph

10754 Commits

Author SHA1 Message Date
Huang Ying 371a096edf mm: don't use radix tree writeback tags for pages in swap cache
File pages use a set of radix tree tags (DIRTY, TOWRITE, WRITEBACK,
etc.) to accelerate finding the pages with a specific tag in the radix
tree during inode writeback.  But for anonymous pages in the swap cache,
there is no inode writeback.  So there is no need to find the pages with
some writeback tags in the radix tree.  It is not necessary to touch
radix tree writeback tags for pages in the swap cache.

Per Rik van Riel's suggestion, a new flag AS_NO_WRITEBACK_TAGS is
introduced for address spaces which don't need to update the writeback
tags.  The flag is set for swap caches.  It may be used for DAX file
systems, etc.

With this patch, the swap out bandwidth improved 22.3% (from ~1.2GB/s to
~1.48GBps) in the vm-scalability swap-w-seq test case with 8 processes.
The test is done on a Xeon E5 v3 system.  The swap device used is a RAM
simulated PMEM (persistent memory) device.  The improvement comes from
the reduced contention on the swap cache radix tree lock.  To test
sequential swapping out, the test case uses 8 processes, which
sequentially allocate and write to the anonymous pages until RAM and
part of the swap device is used up.

Details of comparison is as follow,

base             base+patch
---------------- --------------------------
         %stddev     %change         %stddev
             \          |                \
   2506952 ±  2%     +28.1%    3212076 ±  7%  vm-scalability.throughput
   1207402 ±  7%     +22.3%    1476578 ±  6%  vmstat.swap.so
     10.86 ± 12%     -23.4%       8.31 ± 16%  perf-profile.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list
     10.82 ± 13%     -33.1%       7.24 ± 14%  perf-profile.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_zone_memcg
     10.36 ± 11%    -100.0%       0.00 ± -1%  perf-profile.cycles-pp._raw_spin_lock_irqsave.__test_set_page_writeback.bdev_write_page.__swap_writepage.swap_writepage
     10.52 ± 12%    -100.0%       0.00 ± -1%  perf-profile.cycles-pp._raw_spin_lock_irqsave.test_clear_page_writeback.end_page_writeback.page_endio.pmem_rw_page

Link: http://lkml.kernel.org/r/1472578089-5560-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
zijun_hu 1d8bf926f8 mm/bootmem.c: replace kzalloc() by kzalloc_node()
In ___alloc_bootmem_node_nopanic(), replace kzalloc() by kzalloc_node()
in order to allocate memory within given node preferentially when slab
is available

Link: http://lkml.kernel.org/r/1f487f12-6af4-5e4f-a28c-1de2361cdcd8@zoho.com
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
zijun_hu 2382705f22 mm/nobootmem.c: remove duplicate macro ARCH_LOW_ADDRESS_LIMIT statements
Fix the following bugs:

 - the same ARCH_LOW_ADDRESS_LIMIT statements are duplicated between
   header and relevant source

 - don't ensure ARCH_LOW_ADDRESS_LIMIT perhaps defined by ARCH in
   asm/processor.h is preferred over default in linux/bootmem.h
   completely since the former header isn't included by the latter

Link: http://lkml.kernel.org/r/e046aeaa-e160-6d9e-dc1b-e084c2fd999f@zoho.com
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Srikar Dronamraju 8907de5dc6 mm/memblock.c: expose total reserved memory
The total reserved memory in a system is accounted but not available for
use use outside mm/memblock.c.  By exposing the total reserved memory,
systems can better calculate the size of large hashes.

Link: http://lkml.kernel.org/r/1472476010-4709-3-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Srikar Dronamraju f6f34b4387 mm: introduce arch_reserved_kernel_pages()
Currently arch specific code can reserve memory blocks but
alloc_large_system_hash() may not take it into consideration when sizing
the hashes.  This can lead to bigger hash than required and lead to no
available memory for other purposes.  This is specifically true for
systems with CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled.

One approach to solve this problem would be to walk through the memblock
regions and calculate the available memory and base the size of hash
system on the available memory.

The other approach would be to depend on the architecture to provide the
number of pages that are reserved.  This change provides hooks to allow
the architecture to provide the required info.

Link: http://lkml.kernel.org/r/1472476010-4709-2-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Aneesh Kumar K.V c9634cf012 mm: use zonelist name instead of using hardcoded index
Use the existing enums instead of hardcoded index when looking at the
zonelist.  This makes it more readable.  No functionality change by this
patch.

Link: http://lkml.kernel.org/r/1472227078-24852-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Michal Hocko 1b51e65eab oom, oom_reaper: allow to reap mm shared by the kthreads
oom reaper was skipped for an mm which is shared with the kernel thread
(aka use_mm()).  The primary concern was that such a kthread might want
to read from the userspace memory and see zero page as a result of the
oom reaper action.  This is no longer a problem after "mm: make sure
that kthreads will not refault oom reaped memory" because any attempt to
fault in when the MMF_UNSTABLE is set will result in SIGBUS and so the
target user should see an error.  This means that we can finally allow
oom reaper also to tasks which share their mm with kthreads.

Link: http://lkml.kernel.org/r/1472119394-11342-10-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Michal Hocko 3f70dc38ce mm: make sure that kthreads will not refault oom reaped memory
There are only few use_mm() users in the kernel right now.  Most of them
write to the target memory but vhost driver relies on
copy_from_user/get_user from a kernel thread context.  This makes it
impossible to reap the memory of an oom victim which shares the mm with
the vhost kernel thread because it could see a zero page unexpectedly
and theoretically make an incorrect decision visible outside of the
killed task context.

To quote Michael S. Tsirkin:
: Getting an error from __get_user and friends is handled gracefully.
: Getting zero instead of a real value will cause userspace
: memory corruption.

The vhost kernel thread is bound to an open fd of the vhost device which
is not tight to the mm owner life cycle in general.  The device fd can
be inherited or passed over to another process which means that we
really have to be careful about unexpected memory corruption because
unlike for normal oom victims the result will be visible outside of the
oom victim context.

Make sure that no kthread context (users of use_mm) can ever see
corrupted data because of the oom reaper and hook into the page fault
path by checking MMF_UNSTABLE mm flag.  __oom_reap_task_mm will set the
flag before it starts unmapping the address space while the flag is
checked after the page fault has been handled.  If the flag is set then
SIGBUS is triggered so any g-u-p user will get a error code.

Regular tasks do not need this protection because all which share the mm
are killed when the mm is reaped and so the corruption will not outlive
them.

This patch shouldn't have any visible effect at this moment because the
OOM killer doesn't invoke oom reaper for tasks with mm shared with
kthreads yet.

Link: http://lkml.kernel.org/r/1472119394-11342-9-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Tetsuo Handa 38531201c1 mm, oom: enforce exit_oom_victim on current task
There are no users of exit_oom_victim on !current task anymore so enforce
the API to always work on the current.

Link: http://lkml.kernel.org/r/1472119394-11342-8-git-send-email-mhocko@kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:28 -07:00
Michal Hocko 7d2e7a22cf oom, suspend: fix oom_killer_disable vs. pm suspend properly
Commit 7407054209 ("oom, suspend: fix oom_reaper vs.
oom_killer_disable race") has workaround an existing race between
oom_killer_disable and oom_reaper by adding another round of
try_to_freeze_tasks after the oom killer was disabled.  This was the
easiest thing to do for a late 4.7 fix.  Let's fix it properly now.

After "oom: keep mm of the killed task available" we no longer have to
call exit_oom_victim from the oom reaper because we have stable mm
available and hide the oom_reaped mm by MMF_OOM_SKIP flag.  So let's
remove exit_oom_victim and the race described in the above commit
doesn't exist anymore if.

Unfortunately this alone is not sufficient for the oom_killer_disable
usecase because now we do not have any reliable way to reach
exit_oom_victim (the victim might get stuck on a way to exit for an
unbounded amount of time).  OOM killer can cope with that by checking mm
flags and move on to another victim but we cannot do the same for
oom_killer_disable as we would lose the guarantee of no further
interference of the victim with the rest of the system.  What we can do
instead is to cap the maximum time the oom_killer_disable waits for
victims.  The only current user of this function (pm suspend) already
has a concept of timeout for back off so we can reuse the same value
there.

Let's drop set_freezable for the oom_reaper kthread because it is no
longer needed as the reaper doesn't wake or thaw any processes.

Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Michal Hocko 862e3073b3 mm, oom: get rid of signal_struct::oom_victims
After "oom: keep mm of the killed task available" we can safely detect
an oom victim by checking task->signal->oom_mm so we do not need the
signal_struct counter anymore so let's get rid of it.

This alone wouldn't be sufficient for nommu archs because
exit_oom_victim doesn't hide the process from the oom killer anymore.
We can, however, mark the mm with a MMF flag in __mmput.  We can reuse
MMF_OOM_REAPED and rename it to a more generic MMF_OOM_SKIP.

Link: http://lkml.kernel.org/r/1472119394-11342-6-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Michal Hocko 26db62f179 oom: keep mm of the killed task available
oom_reap_task has to call exit_oom_victim in order to make sure that the
oom vicim will not block the oom killer for ever.  This is, however,
opening new problems (e.g oom_killer_disable exclusion - see commit
7407054209 ("oom, suspend: fix oom_reaper vs.  oom_killer_disable
race")).  exit_oom_victim should be only called from the victim's
context ideally.

One way to achieve this would be to rely on per mm_struct flags.  We
already have MMF_OOM_REAPED to hide a task from the oom killer since
"mm, oom: hide mm which is shared with kthread or global init". The
problem is that the exit path:

  do_exit
    exit_mm
      tsk->mm = NULL;
      mmput
        __mmput
      exit_oom_victim

doesn't guarantee that exit_oom_victim will get called in a bounded
amount of time.  At least exit_aio depends on IO which might get blocked
due to lack of memory and who knows what else is lurking there.

This patch takes a different approach.  We remember tsk->mm into the
signal_struct and bind it to the signal struct life time for all oom
victims.  __oom_reap_task_mm as well as oom_scan_process_thread do not
have to rely on find_lock_task_mm anymore and they will have a reliable
reference to the mm struct.  As a result all the oom specific
communication inside the OOM killer can be done via tsk->signal->oom_mm.

Increasing the signal_struct for something as unlikely as the oom killer
is far from ideal but this approach will make the code much more
reasonable and long term we even might want to move task->mm into the
signal_struct anyway.  In the next step we might want to make the oom
killer exclusion and access to memory reserves completely independent
which would be also nice.

Link: http://lkml.kernel.org/r/1472119394-11342-4-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Tetsuo Handa 8496afaba9 mm,oom_reaper: do not attempt to reap a task twice
"mm, oom_reaper: do not attempt to reap a task twice" tried to give the
OOM reaper one more chance to retry using MMF_OOM_NOT_REAPABLE flag.
But the usefulness of the flag is rather limited and actually never
shown in practice.  If the flag is set, it means that the holder of
mm->mmap_sem cannot call up_write() due to presumably being blocked at
unkillable wait waiting for other thread's memory allocation.  But since
one of threads sharing that mm will queue that mm immediately via
task_will_free_mem() shortcut (otherwise, oom_badness() will select the
same mm again due to oom_score_adj value unchanged), retrying
MMF_OOM_NOT_REAPABLE mm is unlikely helpful.

Let's always set MMF_OOM_REAPED.

Link: http://lkml.kernel.org/r/1472119394-11342-3-git-send-email-mhocko@kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Tetsuo Handa 7ebffa4555 mm,oom_reaper: reduce find_lock_task_mm() usage
Patch series "fortify oom killer even more", v2.

This patch (of 9):

__oom_reap_task() can be simplified a bit if it receives a valid mm from
oom_reap_task() which also uses that mm when __oom_reap_task() failed.
We can drop one find_lock_task_mm() call and also make the
__oom_reap_task() code flow easier to follow.  Moreover, this will make
later patch in the series easier to review.  Pinning mm's mm_count for
longer time is not really harmful because this will not pin much memory.

This patch doesn't introduce any functional change.

Link: http://lkml.kernel.org/r/1472119394-11342-2-git-send-email-mhocko@kernel.org
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Huang Ying 6b53491598 mm, swap: add swap_cluster_list
This is a code clean up patch without functionality changes.  The
swap_cluster_list data structure and its operations are introduced to
provide some better encapsulation for the free cluster and discard
cluster list operations.  This avoid some code duplication, improved the
code readability, and reduced the total line number.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1472067356-16004-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Alexey Dobriyan 131ddc5c7d mm: unrig VMA cache hit ratio
Current code doesn't count first FIND operation after VMA cache flush
(which happen surprisingly often) artificially increasing cache hit ratio.

On my regular setup the difference is:

		Before				After
	==========================================================

	* boot, login into KDE

	vmacache_find_calls 446216	vmacache_find_calls 492741
	vmacache_find_hits 277596	vmacache_find_hits 276096

		~62.2%				~56.0%

	* rebuild kernel (no changes to code, usual config)

	vmacache_find_calls 1943007	vmacache_find_calls 2083718
	vmacache_find_hits 1246123	vmacache_find_hits 1244146

		~64.1%				~59.7%

	* rebuild kernel (full rebuild, usual config)

	vmacache_find_calls 32163155	vmacache_find_calls 33677183
	vmacache_find_hits 27889956	vmacache_find_hits 27877591

		~88.2%				~84.3%

Total: ~4% cache hit ratio.

If someone is counting _relative_ cache _miss_ ratio, misreporting is much
higher.

Link: http://lkml.kernel.org/r/20160822225009.GA3934@p183.telecom.by
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Bart Van Assche c4b209a426 do_generic_file_read(): fail immediately if killed
If a fatal signal has been received, fail immediately instead of trying
to read more data.

If wait_on_page_locked_killable() was interrupted then this page is most
likely is not PageUptodate() and in this case do_generic_file_read()
will fail after lock_page_killable().

See also commit ebded02788 ("mm: filemap: avoid unnecessary calls to
lock_page when waiting for IO to complete during a read")

[oleg@redhat.com: changelog addition]
Link: http://lkml.kernel.org/r/63068e8e-8bee-b208-8441-a3c39a9d9eb6@sandisk.com
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim 9300d8dfd2 mm/page_owner: don't define fields on struct page_ext by hard-coding
There is a memory waste problem if we define field on struct page_ext by
hard-coding.  Entry size of struct page_ext includes the size of those
fields even if it is disabled at runtime.  Now, extra memory request at
runtime is possible so page_owner don't need to define it's own fields
by hard-coding.

This patch removes hard-coded define and uses extra memory for storing
page_owner information in page_owner.  Most of code are just mechanical
changes.

Link: http://lkml.kernel.org/r/1471315879-32294-7-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim 980ac1672e mm/page_ext: support extra space allocation by page_ext user
Until now, if some page_ext users want to use it's own field on
page_ext, it should be defined in struct page_ext by hard-coding.  It
has a problem that wastes memory in following situation.

  struct page_ext {
   #ifdef CONFIG_A
  	int a;
   #endif
   #ifdef CONFIG_B
  	int b;
   #endif
  };

Assume that kernel is built with both CONFIG_A and CONFIG_B.  Even if we
enable feature A and doesn't enable feature B at runtime, each entry of
struct page_ext takes two int rather than one int.  It's undesirable
result so this patch tries to fix it.

To solve above problem, this patch implements to support extra space
allocation at runtime.  When need() callback returns true, it's extra
memory requirement is summed to entry size of page_ext.  Also, offset
for each user's extra memory space is returned.  With this offset, user
can use this extra space and there is no need to define needed field on
page_ext by hard-coding.

This patch only implements an infrastructure.  Following patch will use
it for page_owner which is only user having it's own fields on page_ext.

Link: http://lkml.kernel.org/r/1471315879-32294-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim 0b06bb3f60 mm/page_ext: rename offset to index
Here, 'offset' means entry index in page_ext array.  Following patch
will use 'offset' for field offset in each entry so rename current
'offset' to prevent confusion.

Link: http://lkml.kernel.org/r/1471315879-32294-5-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim e2f612e673 mm/page_owner: move page_owner specific function to page_owner.c
There is no reason that page_owner specific function resides on
vmstat.c.

Link: http://lkml.kernel.org/r/1471315879-32294-4-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim f1c1e9f7b5 mm/debug_pagealloc.c: don't allocate page_ext if we don't use guard page
What debug_pagealloc does is just mapping/unmapping page table.
Basically, it doesn't need additional memory space to memorize
something.  But, with guard page feature, it requires additional memory
to distinguish if the page is for guard or not.  Guard page is only used
when debug_guardpage_minorder is non-zero so this patch removes
additional memory allocation (page_ext) if debug_guardpage_minorder is
zero.

It saves memory if we just use debug_pagealloc and not guard page.

Link: http://lkml.kernel.org/r/1471315879-32294-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Joonsoo Kim acbc15a4b3 mm/debug_pagealloc.c: clean-up guard page handling code
Patch series "Reduce memory waste by page extension user".

This patchset tries to reduce memory waste by page extension user.

First case is architecture supported debug_pagealloc.  It doesn't
requires additional memory if guard page isn't used.  8 bytes per page
will be saved in this case.

Second case is related to page owner feature.  Until now, if page_ext
users want to use it's own fields on page_ext, fields should be defined
in struct page_ext by hard-coding.  It has a following problem.

  struct page_ext {
   #ifdef CONFIG_A
  	int a;
   #endif
   #ifdef CONFIG_B
	int b;
   #endif
  };

Assume that kernel is built with both CONFIG_A and CONFIG_B.  Even if we
enable feature A and doesn't enable feature B at runtime, each entry of
struct page_ext takes two int rather than one int.  It's undesirable
waste so this patch tries to reduce it.  By this patchset, we can save
20 bytes per page dedicated for page owner feature in some
configurations.

This patch (of 6):

We can make code clean by moving decision condition for set_page_guard()
into set_page_guard() itself.  It will help code readability.  There is
no functional change.

Link: http://lkml.kernel.org/r/1471315879-32294-2-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Michal Hocko bf48438354 mm, vmscan: get rid of throttle_vm_writeout
throttle_vm_writeout() was introduced back in 2005 to fix OOMs caused by
excessive pageout activity during the reclaim.  Too many pages could be
put under writeback therefore LRUs would be full of unreclaimable pages
until the IO completes and in turn the OOM killer could be invoked.

There have been some important changes introduced since then in the
reclaim path though.  Writers are throttled by balance_dirty_pages when
initiating the buffered IO and later during the memory pressure, the
direct reclaim is throttled by wait_iff_congested if the node is
considered congested by dirty pages on LRUs and the underlying bdi is
congested by the queued IO.  The kswapd is throttled as well if it
encounters pages marked for immediate reclaim or under writeback which
signals that that there are too many pages under writeback already.
Finally should_reclaim_retry does congestion_wait if the reclaim cannot
make any progress and there are too many dirty/writeback pages.

Another important aspect is that we do not issue any IO from the direct
reclaim context anymore.  In a heavy parallel load this could queue a
lot of IO which would be very scattered and thus unefficient which would
just make the problem worse.

This three mechanisms should throttle and keep the amount of IO in a
steady state even under heavy IO and memory pressure so yet another
throttling point doesn't really seem helpful.  Quite contrary, Mikulas
Patocka has reported that swap backed by dm-crypt doesn't work properly
because the swapout IO cannot make sufficient progress as the writeout
path depends on dm_crypt worker which has to allocate memory to perform
the encryption.  In order to guarantee a forward progress it relies on
the mempool allocator.  mempool_alloc(), however, prefers to use the
underlying (usually page) allocator before it grabs objects from the
pool.  Such an allocation can dive into the memory reclaim and
consequently to throttle_vm_writeout.  If there are too many dirty or
pages under writeback it will get throttled even though it is in fact a
flusher to clear pending pages.

  kworker/u4:0    D ffff88003df7f438 10488     6      2	0x00000000
  Workqueue: kcryptd kcryptd_crypt [dm_crypt]
  Call Trace:
    schedule+0x3c/0x90
    schedule_timeout+0x1d8/0x360
    io_schedule_timeout+0xa4/0x110
    congestion_wait+0x86/0x1f0
    throttle_vm_writeout+0x44/0xd0
    shrink_zone_memcg+0x613/0x720
    shrink_zone+0xe0/0x300
    do_try_to_free_pages+0x1ad/0x450
    try_to_free_pages+0xef/0x300
    __alloc_pages_nodemask+0x879/0x1210
    alloc_pages_current+0xa1/0x1f0
    new_slab+0x2d7/0x6a0
    ___slab_alloc+0x3fb/0x5c0
    __slab_alloc+0x51/0x90
    kmem_cache_alloc+0x27b/0x310
    mempool_alloc_slab+0x1d/0x30
    mempool_alloc+0x91/0x230
    bio_alloc_bioset+0xbd/0x260
    kcryptd_crypt+0x114/0x3b0 [dm_crypt]

Let's just drop throttle_vm_writeout altogether.  It is not very much
helpful anymore.

I have tried to test a potential writeback IO runaway similar to the one
described in the original patch which has introduced that [1].  Small
virtual machine (512MB RAM, 4 CPUs, 2G of swap space and disk image on a
rather slow NFS in a sync mode on the host) with 8 parallel writers each
writing 1G worth of data.  As soon as the pagecache fills up and the
direct reclaim hits then I start anon memory consumer in a loop
(allocating 300M and exiting after populating it) in the background to
make the memory pressure even stronger as well as to disrupt the steady
state for the IO.  The direct reclaim is throttled because of the
congestion as well as kswapd hitting congestion_wait due to nr_immediate
but throttle_vm_writeout doesn't ever trigger the sleep throughout the
test.  Dirty+writeback are close to nr_dirty_threshold with some
fluctuations caused by the anon consumer.

[1] https://www2.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc1/2.6.9-rc1-mm3/broken-out/vm-pageout-throttling.patch
Link: http://lkml.kernel.org/r/1471171473-21418-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Xishi Qiu e780149bcd mm: fix set pageblock migratetype in deferred struct page init
On x86_64 MAX_ORDER_NR_PAGES is usually 4M, and a pageblock is usually
2M, so we only set one pageblock's migratetype in deferred_free_range()
if pfn is aligned to MAX_ORDER_NR_PAGES.  That means it causes
uninitialized migratetype blocks, you can see from "cat
/proc/pagetypeinfo", almost half blocks are Unmovable.

Also we missed freeing the last block in deferred_init_memmap(), it
causes memory leak.

Fixes: ac5d2539b2 ("mm: meminit: reduce number of times pageblocks are set during struct page init")
Link: http://lkml.kernel.org/r/57A3260F.4050709@huawei.com
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Xishi Qiu e506b99696 mem-hotplug: fix node spanned pages when we have a movable node
Commit 342332e6a9 ("mm/page_alloc.c: introduce kernelcore=mirror
option") rewrote the calculation of node spanned pages.  But when we
have a movable node, the size of node spanned pages is double added.
That's because we have an empty normal zone, the present pages is zero,
but its spanned pages is not zero.

e.g.
    Zone ranges:
      DMA      [mem 0x0000000000001000-0x0000000000ffffff]
      DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
      Normal   [mem 0x0000000100000000-0x0000007c7fffffff]
    Movable zone start for each node
      Node 1: 0x0000001080000000
      Node 2: 0x0000002080000000
      Node 3: 0x0000003080000000
      Node 4: 0x0000003c80000000
      Node 5: 0x0000004c80000000
      Node 6: 0x0000005c80000000
    Early memory node ranges
      node   0: [mem 0x0000000000001000-0x000000000009ffff]
      node   0: [mem 0x0000000000100000-0x000000007552afff]
      node   0: [mem 0x000000007bd46000-0x000000007bd46fff]
      node   0: [mem 0x000000007bdcd000-0x000000007bffffff]
      node   0: [mem 0x0000000100000000-0x000000107fffffff]
      node   1: [mem 0x0000001080000000-0x000000207fffffff]
      node   2: [mem 0x0000002080000000-0x000000307fffffff]
      node   3: [mem 0x0000003080000000-0x0000003c7fffffff]
      node   4: [mem 0x0000003c80000000-0x0000004c7fffffff]
      node   5: [mem 0x0000004c80000000-0x0000005c7fffffff]
      node   6: [mem 0x0000005c80000000-0x0000006c7fffffff]
      node   7: [mem 0x0000006c80000000-0x0000007c7fffffff]

  node1:
    Normal, start=0x1080000, present=0x0, spanned=0x1000000
    Movable, start=0x1080000, present=0x1000000, spanned=0x1000000
    pgdat, start=0x1080000, present=0x1000000, spanned=0x2000000

After this patch, the problem is fixed.

  node1:
    Normal, start=0x0, present=0x0, spanned=0x0
    Movable, start=0x1080000, present=0x1000000, spanned=0x1000000
    pgdat, start=0x1080000, present=0x1000000, spanned=0x1000000

Link: http://lkml.kernel.org/r/57A325E8.6070100@huawei.com
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka fdd4c6149a mm, vmscan: make compaction_ready() more accurate and readable
The compaction_ready() is used during direct reclaim for costly order
allocations to skip reclaim for zones where compaction should be
attempted instead.  It's combining the standard compaction_suitable()
check with its own watermark check based on high watermark with extra
gap, and the result is confusing at best.

This patch attempts to better structure and document the checks
involved.  First, compaction_suitable() can determine that the
allocation should either succeed already, or that compaction doesn't
have enough free pages to proceed.  The third possibility is that
compaction has enough free pages, but we still decide to reclaim first -
unless we are already above the high watermark with gap.  This does not
mean that the reclaim will actually reach this watermark during single
attempt, this is rather an over-reclaim protection.  So document the
code as such.  The check for compaction_deferred() is removed
completely, as it in fact had no proper role here.

The result after this patch is mainly a less confusing code.  We also
skip some over-reclaim in cases where the allocation should already
succed.

Link: http://lkml.kernel.org/r/20160810091226.6709-12-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka 8348faf91f mm, compaction: require only min watermarks for non-costly orders
The __compaction_suitable() function checks the low watermark plus a
compact_gap() gap to decide if there's enough free memory to perform
compaction.  Then __isolate_free_page uses low watermark check to decide
if particular free page can be isolated.  In the latter case, using low
watermark is needlessly pessimistic, as the free page isolations are
only temporary.  For __compaction_suitable() the higher watermark makes
sense for high-order allocations where more freepages increase the
chance of success, and we can typically fail with some order-0 fallback
when the system is struggling to reach that watermark.  But for
low-order allocation, forming the page should not be that hard.  So
using low watermark here might just prevent compaction from even trying,
and eventually lead to OOM killer even if we are above min watermarks.

So after this patch, we use min watermark for non-costly orders in
__compaction_suitable(), and for all orders in __isolate_free_page().

[vbabka@suse.cz: clarify __isolate_free_page() comment]
 Link: http://lkml.kernel.org/r/7ae4baec-4eca-e70b-2a69-94bea4fb19fa@suse.cz
Link: http://lkml.kernel.org/r/20160810091226.6709-11-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka 984fdba6a3 mm, compaction: use proper alloc_flags in __compaction_suitable()
The __compaction_suitable() function checks the low watermark plus a
compact_gap() gap to decide if there's enough free memory to perform
compaction.  This check uses direct compactor's alloc_flags, but that's
wrong, since these flags are not applicable for freepage isolation.

For example, alloc_flags may indicate access to memory reserves, making
compaction proceed, and then fail watermark check during the isolation.

A similar problem exists for ALLOC_CMA, which may be part of
alloc_flags, but not during freepage isolation.  In this case however it
makes sense to use ALLOC_CMA both in __compaction_suitable() and
__isolate_free_page(), since there's actually nothing preventing the
freepage scanner to isolate from CMA pageblocks, with the assumption
that a page that could be migrated once by compaction can be migrated
also later by CMA allocation.  Thus we should count pages in CMA
pageblocks when considering compaction suitability and when isolating
freepages.

To sum up, this patch should remove some false positives from
__compaction_suitable(), and allow compaction to proceed when free pages
required for compaction reside in the CMA pageblocks.

Link: http://lkml.kernel.org/r/20160810091226.6709-10-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka 9861a62c33 mm, compaction: create compact_gap wrapper
Compaction uses a watermark gap of (2UL << order) pages at various
places and it's not immediately obvious why.  Abstract it through a
compact_gap() wrapper to create a single place with a thorough
explanation.

[vbabka@suse.cz: clarify the comment of compact_gap()]
 Link: http://lkml.kernel.org/r/7b6aed1f-fdf8-2063-9ff4-bbe4de712d37@suse.cz
Link: http://lkml.kernel.org/r/20160810091226.6709-9-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka f2b8228c5f mm, compaction: use correct watermark when checking compaction success
The __compact_finished() function uses low watermark in a check that has
to pass if the direct compaction is to finish and allocation should
succeed.  This is too pessimistic, as the allocation will typically use
min watermark.  It may happen that during compaction, we drop below the
low watermark (due to parallel activity), but still form the target
high-order page.  By checking against low watermark, we might needlessly
continue compaction.

Similarly, __compaction_suitable() uses low watermark in a check whether
allocation can succeed without compaction.  Again, this is unnecessarily
pessimistic.

After this patch, these check will use direct compactor's alloc_flags to
determine the watermark, which is effectively the min watermark.

Link: http://lkml.kernel.org/r/20160810091226.6709-8-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka a8e025e55b mm, compaction: add the ultimate direct compaction priority
During reclaim/compaction loop, it's desirable to get a final answer
from unsuccessful compaction so we can either fail the allocation or
invoke the OOM killer.  However, heuristics such as deferred compaction
or pageblock skip bits can cause compaction to skip parts or whole zones
and lead to premature OOM's, failures or excessive reclaim/compaction
retries.

To remedy this, we introduce a new direct compaction priority called
COMPACT_PRIO_SYNC_FULL, which instructs direct compaction to:

 - ignore deferred compaction status for a zone
 - ignore pageblock skip hints
 - ignore cached scanner positions and scan the whole zone

The new priority should get eventually picked up by
should_compact_retry() and this should improve success rates for costly
allocations using __GFP_REPEAT, such as hugetlbfs allocations, and
reduce some corner-case OOM's for non-costly allocations.

Link: http://lkml.kernel.org/r/20160810091226.6709-6-vbabka@suse.cz
[vbabka@suse.cz: use the MIN_COMPACT_PRIORITY alias]
  Link: http://lkml.kernel.org/r/d443b884-87e7-1c93-8684-3a3a35759fb1@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka 7ceb009a22 mm, compaction: don't recheck watermarks after COMPACT_SUCCESS
Joonsoo has reminded me that in a later patch changing watermark checks
throughout compaction I forgot to update checks in
try_to_compact_pages() and compactd_do_work().  Closer inspection
however shows that they are redundant now in the success case, because
compact_zone() now reliably reports this with COMPACT_SUCCESS.  So
effectively the checks just repeat (a subset) of checks that have just
passed.  So instead of checking watermarks again, just test the return
value.

Note it's also possible that compaction would declare failure e.g.
because its find_suitable_fallback() is more strict than simple
watermark check, and then the watermark check we are removing would then
still succeed.  After this patch this is not possible and it's arguably
better, because for long-term fragmentation avoidance we should rather
try a different zone than allocate with the unsuitable fallback.  If
compaction of all zones fail and the allocation is important enough, it
will retry and succeed anyway.

Also remove the stray "bool success" variable from kcompactd_do_work().

Link: http://lkml.kernel.org/r/20160810091226.6709-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka cf378319d3 mm, compaction: rename COMPACT_PARTIAL to COMPACT_SUCCESS
COMPACT_PARTIAL has historically meant that compaction returned after
doing some work without fully compacting a zone.  It however didn't
distinguish if compaction terminated because it succeeded in creating
the requested high-order page.  This has changed recently and now we
only return COMPACT_PARTIAL when compaction thinks it succeeded, or the
high-order watermark check in compaction_suitable() passes and no
compaction needs to be done.

So at this point we can make the return value clearer by renaming it to
COMPACT_SUCCESS.  The next patch will remove some redundant tests for
success where compaction just returned COMPACT_SUCCESS.

Link: http://lkml.kernel.org/r/20160810091226.6709-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka 791cae9620 mm, compaction: cleanup unused functions
Since kswapd compaction moved to kcompactd, compact_pgdat() is not
called anymore, so we remove it.  The only caller of __compact_pgdat()
is compact_node(), so we merge them and remove code that was only
reachable from kswapd.

Link: http://lkml.kernel.org/r/20160810091226.6709-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Vlastimil Babka 06ed29989f mm, compaction: make whole_zone flag ignore cached scanner positions
Patch series "make direct compaction more deterministic")

This is mostly a followup to Michal's oom detection rework, which
highlighted the need for direct compaction to provide better feedback in
reclaim/compaction loop, so that it can reliably recognize when
compaction cannot make further progress, and allocation should invoke
OOM killer or fail.  We've discussed this at LSF/MM [1] where I proposed
expanding the async/sync migration mode used in compaction to more
general "priorities".  This patchset adds one new priority that just
overrides all the heuristics and makes compaction fully scan all zones.
I don't currently think that we need more fine-grained priorities, but
we'll see.  Other than that there's some smaller fixes and cleanups,
mainly related to the THP-specific hacks.

I've tested this with stress-highalloc in GFP_KERNEL order-4 and
THP-like order-9 scenarios.  There's some improvement for compaction
stats for the order-4, which is likely due to the better watermarks
handling.  In the previous version I reported mostly noise wrt
compaction stats, and decreased direct reclaim - now the reclaim is
without difference.  I believe this is due to the less aggressive
compaction priority increase in patch 6.

"before" is a mmotm tree prior to 4.7 release plus the first part of the
series that was sent and merged separately

                                    before        after
order-4:

Compaction stalls                    27216       30759
Compaction success                   19598       25475
Compaction failures                   7617        5283
Page migrate success                370510      464919
Page migrate failure                 25712       27987
Compaction pages isolated           849601     1041581
Compaction migrate scanned       143146541   101084990
Compaction free scanned          208355124   144863510
Compaction cost                       1403        1210

order-9:

Compaction stalls                     7311        7401
Compaction success                    1634        1683
Compaction failures                   5677        5718
Page migrate success                194657      183988
Page migrate failure                  4753        4170
Compaction pages isolated           498790      456130
Compaction migrate scanned          565371      524174
Compaction free scanned            4230296     4250744
Compaction cost                        215         203

[1] https://lwn.net/Articles/684611/

This patch (of 11):

A recent patch has added whole_zone flag that compaction sets when
scanning starts from the zone boundary, in order to report that zone has
been fully scanned in one attempt.  For allocations that want to try
really hard or cannot fail, we will want to introduce a mode where
scanning whole zone is guaranteed regardless of the cached positions.

This patch reuses the whole_zone flag in a way that if it's already
passed true to compaction, the cached scanner positions are ignored.
Employing this flag during reclaim/compaction loop will be done in the
next patch.  This patch however converts compaction invoked from
userspace via procfs to use this flag.  Before this patch, the cached
positions were first reset to zone boundaries and then read back from
struct zone, so there was a window where a parallel compaction could
replace the reset values, making the manual compaction less effective.
Using the flag instead of performing reset is more robust.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20160810091226.6709-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:27 -07:00
Michal Hocko 5870c2e1d7 mm/oom_kill.c: fix task_will_free_mem() comment
Attempt to demystify the task_will_free_mem() loop.

Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:26 -07:00
Vladimir Davydov 58fa2a5512 mm: memcontrol: add sanity checks for memcg->id.ref on get/put
Link: http://lkml.kernel.org/r/1c5ddb1c171dbdfc3262252769d6138a29b35b70.1470219853.git.vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:26 -07:00
zijun_hu 252e5c6e2e mm/vmalloc.c: fix align value calculation error
It causes double align requirement for __get_vm_area_node() if parameter
size is power of 2 and VM_IOREMAP is set in parameter flags, for example
size=0x10000 -> fls_long(0x10000)=17 -> align=0x20000

get_count_order_long() is implemented and can be used instead of
fls_long() for fixing the bug, for example size=0x10000 ->
get_count_order_long(0x10000)=16 -> align=0x10000

[akpm@linux-foundation.org: s/get_order_long()/get_count_order_long()/]
[zijun_hu@zoho.com: fixes]
 Link: http://lkml.kernel.org/r/57AABC8B.1040409@zoho.com
[akpm@linux-foundation.org: locate get_count_order_long() next to get_count_order()]
[akpm@linux-foundation.org: move get_count_order[_long] definitions to pick up fls_long()]
[zijun_hu@htc.com: move out get_count_order[_long]() from __KERNEL__ scope]
 Link: http://lkml.kernel.org/r/57B2C4CE.80303@zoho.com
Link: http://lkml.kernel.org/r/fc045ecf-20fa-0722-b3ac-9a6140488fad@zoho.com
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:26 -07:00
Vladimir Davydov 7c5f64f844 mm: oom: deduplicate victim selection code for memcg and global oom
When selecting an oom victim, we use the same heuristic for both memory
cgroup and global oom.  The only difference is the scope of tasks to
select the victim from.  So we could just export an iterator over all
memcg tasks and keep all oom related logic in oom_kill.c, but instead we
duplicate pieces of it in memcontrol.c reusing some initially private
functions of oom_kill.c in order to not duplicate all of it.  That looks
ugly and error prone, because any modification of select_bad_process
should also be propagated to mem_cgroup_out_of_memory.

Let's rework this as follows: keep all oom heuristic related code private
to oom_kill.c and make oom_kill.c use exported memcg functions when it's
really necessary (like in case of iterating over memcg tasks).

Link: http://lkml.kernel.org/r/1470056933-7505-1-git-send-email-vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:26 -07:00
Linus Torvalds 8d37059581 xfs: updates for 4.9-rc1
Included in this update:
 - change of XFS mailing list to linux-xfs@vger.kernel.org
 - iomap-based DAX infrastructure w/ XFS and ext2 support
 - small iomap fixes and additions
 - more efficient XFS delayed allocation infrastructure based on iomap
 - a rework of log recovery writeback scheduling to ensure we don't
   fail recovery when trying to replay items that are already on disk
 - some preparation patches for upcoming reflink support
 - configurable error handling fixes and documentation
 - aio access time update race fixes for XFS and generic_file_read_iter
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX9WvjAAoJEK3oKUf0dfodrl8P/R1cS8tEHnrmNlKeENNWFTlN
 q8HEfP3tX43QLHXpeHd9F9qXs5/esrOFfWYFjeoAaB1cWiRXDJsUNOEH3PuQf0Go
 NKHgrL8GiU6XY9keZI6KJYphr2a5//qWJywxOeBuJh3446MDSYwOmI3eEIY8ac3/
 k0e8bMnLhfryWOvyZE6v2w75lMi+SL1LH/W6OSJqGFKS3N+GqdqRKkMfYGQToHkM
 ZgIX1vDSq4xgJzkR1Q+AACCaSTGE2wEG/bnqZ1R3l19/bERB17LaOyEegBDXbrTT
 vI31EQnrN92O/Q2eYJlap8nFIm4lVaCFTU1R7KEVEXvUBRXXfxllu1sOSBpn1PSQ
 OrC5bbcCodcG8b1SlwRrcstqc42weojqwyl65eJxOa17valghaYEcLkqEZrrrssv
 Y+C0okfL3UB2JAxG4O1nFQ3py1cYlkYURf6CuhxNQfktXZxSpAMTLy9wYCRylBiO
 Eu6Say4zfnfKiVaSg0xlMhIaAyugVH+uVro62hZYxCU2mJ/biZHeQAUC6Krl6NsY
 NsAk0T7eUgMd7lLW+C9/rL2AQaXYwR72cl/1jAWBE2piBM2Gu1lcGHGwWHvOcYjO
 K2Yg4RMnR9TDbUX2jl1r4bZoQD3IZ3HpUjgVInmbTPtKY4q89kfC40haSpBQykm7
 QzGLPvFz2sMrkmKPLbV2
 =R9uL
 -----END PGP SIGNATURE-----

Merge tag 'xfs-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull xfs and iomap updates from Dave Chinner:
 "The main things in this update are the iomap-based DAX infrastructure,
  an XFS delalloc rework, and a chunk of fixes to how log recovery
  schedules writeback to prevent spurious corruption detections when
  recovery of certain items was not required.

  The other main chunk of code is some preparation for the upcoming
  reflink functionality. Most of it is generic and cleanups that stand
  alone, but they were ready and reviewed so are in this pull request.

  Speaking of reflink, I'm currently planning to send you another pull
  request next week containing all the new reflink functionality. I'm
  working through a similar process to the last cycle, where I sent the
  reverse mapping code in a separate request because of how large it
  was. The reflink code merge is even bigger than reverse mapping, so
  I'll be doing the same thing again....

  Summary for this update:

   - change of XFS mailing list to linux-xfs@vger.kernel.org

   - iomap-based DAX infrastructure w/ XFS and ext2 support

   - small iomap fixes and additions

   - more efficient XFS delayed allocation infrastructure based on iomap

   - a rework of log recovery writeback scheduling to ensure we don't
     fail recovery when trying to replay items that are already on disk

   - some preparation patches for upcoming reflink support

   - configurable error handling fixes and documentation

   - aio access time update race fixes for XFS and
     generic_file_read_iter"

* tag 'xfs-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (40 commits)
  fs: update atime before I/O in generic_file_read_iter
  xfs: update atime before I/O in xfs_file_dio_aio_read
  ext2: fix possible integer truncation in ext2_iomap_begin
  xfs: log recovery tracepoints to track current lsn and buffer submission
  xfs: update metadata LSN in buffers during log recovery
  xfs: don't warn on buffers not being recovered due to LSN
  xfs: pass current lsn to log recovery buffer validation
  xfs: rework log recovery to submit buffers on LSN boundaries
  xfs: quiesce the filesystem after recovery on readonly mount
  xfs: remote attribute blocks aren't really userdata
  ext2: use iomap to implement DAX
  ext2: stop passing buffer_head to ext2_get_blocks
  xfs: use iomap to implement DAX
  xfs: refactor xfs_setfilesize
  xfs: take the ilock shared if possible in xfs_file_iomap_begin
  xfs: fix locking for DAX writes
  dax: provide an iomap based fault handler
  dax: provide an iomap based dax read/write path
  dax: don't pass buffer_head to copy_user_dax
  dax: don't pass buffer_head to dax_insert_mapping
  ...
2016-10-06 08:18:10 -07:00
Johannes Weiner 3ddf40e8c3 mm: filemap: fix mapping->nrpages double accounting in fuse
Commit 22f2ac51b6 ("mm: workingset: fix crash in shadow node shrinker
caused by replace_page_cache_page()") switched replace_page_cache() from
raw radix tree operations to page_cache_tree_insert() but didn't take
into account that the latter function, unlike the raw radix tree op,
handles mapping->nrpages.  As a result, that counter is bumped for each
page replacement rather than balanced out even.

The mapping->nrpages counter is used to skip needless radix tree walks
when invalidating, truncating, syncing inodes without pages, as well as
statistics for userspace.  Since the error is positive, we'll do more
page cache tree walks than necessary; we won't miss a necessary one.
And we'll report more buffer pages to userspace than there are.  The
error is limited to fuse inodes.

Fixes: 22f2ac51b6 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-05 09:17:56 -07:00
Johannes Weiner d3798ae8c6 mm: filemap: don't plant shadow entries without radix tree node
When the underflow checks were added to workingset_node_shadow_dec(),
they triggered immediately:

  kernel BUG at ./include/linux/swap.h:276!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: isofs usb_storage fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_reject_ipv6
   soundcore wmi acpi_als pinctrl_sunrisepoint kfifo_buf tpm_tis industrialio acpi_pad pinctrl_intel tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc dm_crypt
  CPU: 0 PID: 20929 Comm: blkid Not tainted 4.8.0-rc8-00087-gbe67d60ba944 #1
  Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016
  task: ffff8faa93ecd940 task.stack: ffff8faa7f478000
  RIP: page_cache_tree_insert+0xf1/0x100
  Call Trace:
    __add_to_page_cache_locked+0x12e/0x270
    add_to_page_cache_lru+0x4e/0xe0
    mpage_readpages+0x112/0x1d0
    blkdev_readpages+0x1d/0x20
    __do_page_cache_readahead+0x1ad/0x290
    force_page_cache_readahead+0xaa/0x100
    page_cache_sync_readahead+0x3f/0x50
    generic_file_read_iter+0x5af/0x740
    blkdev_read_iter+0x35/0x40
    __vfs_read+0xe1/0x130
    vfs_read+0x96/0x130
    SyS_read+0x55/0xc0
    entry_SYSCALL_64_fastpath+0x13/0x8f
  Code: 03 00 48 8b 5d d8 65 48 33 1c 25 28 00 00 00 44 89 e8 75 19 48 83 c4 18 5b 41 5c 41 5d 41 5e 5d c3 0f 0b 41 bd ef ff ff ff eb d7 <0f> 0b e8 88 68 ef ff 0f 1f 84 00
  RIP  page_cache_tree_insert+0xf1/0x100

This is a long-standing bug in the way shadow entries are accounted in
the radix tree nodes. The shrinker needs to know when radix tree nodes
contain only shadow entries, no pages, so node->count is split in half
to count shadows in the upper bits and pages in the lower bits.

Unfortunately, the radix tree implementation doesn't know of this and
assumes all entries are in node->count. When there is a shadow entry
directly in root->rnode and the tree is later extended, the radix tree
implementation will copy that entry into the new node and and bump its
node->count, i.e. increases the page count bits. Once the shadow gets
removed and we subtract from the upper counter, node->count underflows
and triggers the warning. Afterwards, without node->count reaching 0
again, the radix tree node is leaked.

Limit shadow entries to when we have actual radix tree nodes and can
count them properly. That means we lose the ability to detect refaults
from files that had only the first page faulted in at eviction time.

Fixes: 449dd6984d ("mm: keep page cache radix tree nodes in check")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-05 09:17:56 -07:00
Linus Torvalds 597f03f9d1 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
 "Yet another batch of cpu hotplug core updates and conversions:

   - Provide core infrastructure for multi instance drivers so the
     drivers do not have to keep custom lists.

   - Convert custom lists to the new infrastructure. The block-mq custom
     list conversion comes through the block tree and makes the diffstat
     tip over to more lines removed than added.

   - Handle unbalanced hotplug enable/disable calls more gracefully.

   - Remove the obsolete CPU_STARTING/DYING notifier support.

   - Convert another batch of notifier users.

   The relayfs changes which conflicted with the conversion have been
   shipped to me by Andrew.

   The remaining lot is targeted for 4.10 so that we finally can remove
   the rest of the notifiers"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  cpufreq: Fix up conversion to hotplug state machine
  blk/mq: Reserve hotplug states for block multiqueue
  x86/apic/uv: Convert to hotplug state machine
  s390/mm/pfault: Convert to hotplug state machine
  mips/loongson/smp: Convert to hotplug state machine
  mips/octeon/smp: Convert to hotplug state machine
  fault-injection/cpu: Convert to hotplug state machine
  padata: Convert to hotplug state machine
  cpufreq: Convert to hotplug state machine
  ACPI/processor: Convert to hotplug state machine
  virtio scsi: Convert to hotplug state machine
  oprofile/timer: Convert to hotplug state machine
  block/softirq: Convert to hotplug state machine
  lib/irq_poll: Convert to hotplug state machine
  x86/microcode: Convert to hotplug state machine
  sh/SH-X3 SMP: Convert to hotplug state machine
  ia64/mca: Convert to hotplug state machine
  ARM/OMAP/wakeupgen: Convert to hotplug state machine
  ARM/shmobile: Convert to hotplug state machine
  arm64/FP/SIMD: Convert to hotplug state machine
  ...
2016-10-03 19:43:08 -07:00
Linus Torvalds 8e4ef63867 Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vdso updates from Ingo Molnar:
 "The main changes in this cycle centered around adding support for
  32-bit compatible C/R of the vDSO on 64-bit kernels, by Dmitry
  Safonov"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Use CONFIG_X86_X32_ABI to enable vdso prctl
  x86/vdso: Only define map_vdso_randomized() if CONFIG_X86_64
  x86/vdso: Only define prctl_map_vdso() if CONFIG_CHECKPOINT_RESTORE
  x86/signal: Add SA_{X32,IA32}_ABI sa_flags
  x86/ptrace: Down with test_thread_flag(TIF_IA32)
  x86/coredump: Use pr_reg size, rather that TIF_IA32 flag
  x86/arch_prctl/vdso: Add ARCH_MAP_VDSO_*
  x86/vdso: Replace calculate_addr in map_vdso() with addr
  x86/vdso: Unmap vdso blob on vvar mapping failure
2016-10-03 17:29:01 -07:00
Linus Torvalds af79ad2b1f Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "The main changes are:

   - irqtime accounting cleanups and enhancements. (Frederic Weisbecker)

   - schedstat debugging enhancements, make it more broadly runtime
     available. (Josh Poimboeuf)

   - More work on asymmetric topology/capacity scheduling. (Morten
     Rasmussen)

   - sched/wait fixes and cleanups. (Oleg Nesterov)

   - PELT (per entity load tracking) improvements. (Peter Zijlstra)

   - Rewrite and enhance select_idle_siblings(). (Peter Zijlstra)

   - sched/numa enhancements/fixes (Rik van Riel)

   - sched/cputime scalability improvements (Stanislaw Gruszka)

   - Load calculation arithmetics fixes. (Dietmar Eggemann)

   - sched/deadline enhancements (Tommaso Cucinotta)

   - Fix utilization accounting when switching to the SCHED_NORMAL
     policy. (Vincent Guittot)

   - ... plus misc cleanups and enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  sched/irqtime: Consolidate irqtime flushing code
  sched/irqtime: Consolidate accounting synchronization with u64_stats API
  u64_stats: Introduce IRQs disabled helpers
  sched/irqtime: Remove needless IRQs disablement on kcpustat update
  sched/irqtime: No need for preempt-safe accessors
  sched/fair: Fix min_vruntime tracking
  sched/debug: Add SCHED_WARN_ON()
  sched/core: Fix set_user_nice()
  sched/fair: Introduce set_curr_task() helper
  sched/core, ia64: Rename set_curr_task()
  sched/core: Fix incorrect utilization accounting when switching to fair class
  sched/core: Optimize SCHED_SMT
  sched/core: Rewrite and improve select_idle_siblings()
  sched/core: Replace sd_busy/nr_busy_cpus with sched_domain_shared
  sched/core: Introduce 'struct sched_domain_shared'
  sched/core: Restructure destroy_sched_domain()
  sched/core: Remove unused @cpu argument from destroy_sched_domain*()
  sched/wait: Introduce init_wait_entry()
  sched/wait: Avoid abort_exclusive_wait() in __wait_on_bit_lock()
  sched/wait: Avoid abort_exclusive_wait() in ___wait_event()
  ...
2016-10-03 13:39:00 -07:00
Linus Torvalds 72ec94560d Power management material for v4.9-rc1
- Add a mechanism for passing hints from the scheduler to cpufreq governors
    via their utilization update callbacks and use it to introduce "IOwait
    boosting" into the schedutil governor and intel_pstate that will make them
    boost performance if the enqueued task was previously waiting on I/O
    (Rafael Wysocki).
 
  - Fix a schedutil governor problem that causes it to overestimate utilization
    if SMT is in use (Steve Muckle).
 
  - Update defconfigs trying to use the schedutil governor as a module which is
    not possible any more (Javier Martinez Canillas).
 
  - Update the intel_pstate's pstate_sample tracepoint to take "IOwait boosting"
    into account (Srinivas Pandruvada).
 
  - Fix a problem in the cpufreq core causing it to mishandle the initialization
    of CPUs registered after the cpufreq driver (Viresh Kumar, Rafael Wysocki).
 
  - Make the cpufreq-dt driver support per-policy governor tunables, clean it
    up and update its Kconfig description (Viresh Kumar).
 
  - Add support for more ARM platforms to the cpufreq-dt driver (Chanwoo Choi,
    Dave Gerlach, Geert Uytterhoeven).
 
  - Make the cpufreq CPPC driver report frequencies in KHz to avoid user space
    compatiblility issues (Al Stone, Hoan Tran).
 
  - Clean up a few cpufreq drivers (st, kirkwood, SCPI) a bit (Colin Ian King,
    Markus Elfring).
 
  - Constify some local structures in the intel_pstate driver (Julia Lawall).
 
  - Add a Documentation/cpu-freq/ entry to MAINTAINERS (Jean Delvare).
 
  - Add support for PM domain removal to the generic power domains (genpd)
    framework, add new DT helper functions to it and make it always enable
    debugfs support if available (Jon Hunter, Tomeu Vizoso).
 
  - Clean up the generic power domains (genpd) framework and make it avoid
    measuring power-on and power-off latencies during system-wide PM transitions
    (Ulf Hansson).
 
  - Add support for the RockChip DFI controller and the rk3399 DMC to the
    devfreq framework (Lin Huang, Axel Lin, Arnd Bergmann).
 
  - Add COMPILE_TEST to the devfreq framework (Krzysztof Kozlowski, Stephen
    Rothwell).
 
  - Fix a minor issue in the exynos-ppmu devfreq driver and fix up devfreq
    Kconfig indentation style (Wei Yongjun, Jisheng Zhang).
 
  - Fix the system suspend interface to make suspend-to-idle work if platform
    suspend operations have not been registered (Sudeep Holla).
 
  - Make it possible to use hibernation with PAGE_POISONING_ZERO enabled
    (Anisse Astier).
 
  - Increas the default timeout of the system suspend/resume watchdog and make it
    depend on EXPERT (Chen Yu).
 
  - Make the operating performance points (OPP) framework avoid using OPPs that
    aren't supported by the platform and fix a build warning in it (Dave Gerlach,
    Arnd Bergmann).
 
  - Fix the ARM cpuidle driver's return value (Christophe Jaillet).
 
  - Make the SmartReflex AVS (Adaptive Voltage Scaling) driver use more common
    logging style (Joe Perches).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJX8Y32AAoJEILEb/54YlRx8e0P/27zu8Lb6Aks1S2Zx9GEW0qr
 DvrO4kklCHqi3DgHlyFOYetf9cxMrUluojVJofnoSDvgAayWyg7VAd4gtOrMGCXG
 pJVJM73itcOUK+DsAVvoWJY3hk15nX77n2aiXPN2GqaMqennlQusdfzTmjCasqpm
 M84j+JwFYlJcfyMCcF5kGWqS7QBjzxhA0CjytUX1i3pL3NqRALZUEpaHwBD1W+4r
 tcF/jYTy3RsghCbuC6HoPxEF9NMOFGxeAXogmu6NvGu8gy0GqtywRSRrs5wA1a0z
 ZDAJ8krrFbzuFPMdjNIE8wtTeziofS5i9piQx3JlIMH3HpNGN86BRXVfzuHzJj11
 6ZMUI/FJy+fYukIXOEeVLtsLHUnMcMux8Jq1UF6N0InahaR9nbsjmGOmXh72+Scx
 7VJ+29l0oVwX6wkw/DjPP3rb1Swd1i3yY0/3uRoJ174mYTjhRGbrbDkIjPiDeuM5
 2Cx7QunscOjFmaNtPyr8niQ+7YhMEpn8VIbGNaX5ABz0fGftfi8nDHqliSNa391Z
 nK6YoKD0O6R0JHE6GavvJTcuMS9qE+HHHOwymWKxEdE9KYk0JUqen3gj1sSTaAZT
 BIPBsn6XlorqNy3dnqtWTHV7Nf0al9huolWvrL90s6g4Bh2BzTzDVydSgNWTMDUi
 G64nP0q1sJTqdoe30uvk
 =NYkv
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "Traditionally, cpufreq is the area with the greatest number of
  changes, but there are fewer of them than last time. There also is
  some activity in the generic power domains and the devfreq frameworks,
  a couple of system suspend and hibernation fixes and some assorted
  changes in other places.

  One new feature is the cpufreq change to allow the scheduler to pass
  hints to the governors' utilization update callbacks and some code
  rework based on that. Another one is the support for domain removal in
  the generic power domains framework. Also it is now possible to use
  hibernation with PAGE_POISONING_ZERO enabled and devfreq supports the
  RockChip DFI controller and the rk3399 DMC.

  The rest of the changes is mostly fixes and cleanups in a number of
  places.

  Specifics:

   - Add a mechanism for passing hints from the scheduler to cpufreq
     governors via their utilization update callbacks and use it to
     introduce "IOwait boosting" into the schedutil governor and
     intel_pstate that will make them boost performance if the enqueued
     task was previously waiting on I/O (Rafael Wysocki).

   - Fix a schedutil governor problem that causes it to overestimate
     utilization if SMT is in use (Steve Muckle).

   - Update defconfigs trying to use the schedutil governor as a module
     which is not possible any more (Javier Martinez Canillas).

   - Update the intel_pstate's pstate_sample tracepoint to take "IOwait
     boosting" into account (Srinivas Pandruvada).

   - Fix a problem in the cpufreq core causing it to mishandle the
     initialization of CPUs registered after the cpufreq driver (Viresh
     Kumar, Rafael Wysocki).

   - Make the cpufreq-dt driver support per-policy governor tunables,
     clean it up and update its Kconfig description (Viresh Kumar).

   - Add support for more ARM platforms to the cpufreq-dt driver
     (Chanwoo Choi, Dave Gerlach, Geert Uytterhoeven).

   - Make the cpufreq CPPC driver report frequencies in KHz to avoid
     user space compatiblility issues (Al Stone, Hoan Tran).

   - Clean up a few cpufreq drivers (st, kirkwood, SCPI) a bit (Colin
     Ian King, Markus Elfring).

   - Constify some local structures in the intel_pstate driver (Julia
     Lawall).

   - Add a Documentation/cpu-freq/ entry to MAINTAINERS (Jean Delvare).

   - Add support for PM domain removal to the generic power domains
     (genpd) framework, add new DT helper functions to it and make it
     always enable debugfs support if available (Jon Hunter, Tomeu
     Vizoso).

   - Clean up the generic power domains (genpd) framework and make it
     avoid measuring power-on and power-off latencies during system-wide
     PM transitions (Ulf Hansson).

   - Add support for the RockChip DFI controller and the rk3399 DMC to
     the devfreq framework (Lin Huang, Axel Lin, Arnd Bergmann).

   - Add COMPILE_TEST to the devfreq framework (Krzysztof Kozlowski,
     Stephen Rothwell).

   - Fix a minor issue in the exynos-ppmu devfreq driver and fix up
     devfreq Kconfig indentation style (Wei Yongjun, Jisheng Zhang).

   - Fix the system suspend interface to make suspend-to-idle work if
     platform suspend operations have not been registered (Sudeep
     Holla).

   - Make it possible to use hibernation with PAGE_POISONING_ZERO
     enabled (Anisse Astier).

   - Increas the default timeout of the system suspend/resume watchdog
     and make it depend on EXPERT (Chen Yu).

   - Make the operating performance points (OPP) framework avoid using
     OPPs that aren't supported by the platform and fix a build warning
     in it (Dave Gerlach, Arnd Bergmann).

   - Fix the ARM cpuidle driver's return value (Christophe Jaillet).

   - Make the SmartReflex AVS (Adaptive Voltage Scaling) driver use more
     common logging style (Joe Perches)"

* tag 'pm-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
  PM / OPP: Don't support OPP if it provides supported-hw but platform does not
  cpufreq: st: add missing \n to end of dev_err message
  cpufreq: kirkwood: add missing \n to end of dev_err messages
  PM / Domains: Rename pm_genpd_sync_poweron|poweroff()
  PM / Domains: Don't measure latency of ->power_on|off() during system PM
  PM / Domains: Remove redundant system PM callbacks
  PM / Domains: Simplify detaching a device from its genpd
  PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .remove
  PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependency
  PM / OPP: avoid maybe-uninitialized warning
  PM / Domains: Allow holes in genpd_data.domains array
  cpufreq: CPPC: Avoid overflow when calculating desired_perf
  cpufreq: ti: Use generic platdev driver
  cpufreq: intel_pstate: Add io_boost trace
  partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage"
  cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm
  cpufreq: schedutil: Add iowait boosting
  cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition
  PM / Domains: Add support for removing nested PM domains by provider
  PM / Domains: Add support for removing PM domains
  ...
2016-10-03 09:33:40 -07:00
Linus Torvalds 7af8a0f808 arm64 updates for 4.9:
- Support for execute-only page permissions
 - Support for hibernate and DEBUG_PAGEALLOC
 - Support for heterogeneous systems with mismatches cache line sizes
 - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
 - arm64 PMU perf updates, including cpumasks for heterogeneous systems
 - Set UTS_MACHINE for building rpm packages
 - Yet another head.S tidy-up
 - Some cleanups and refactoring, particularly in the NUMA code
 - Lots of random, non-critical fixes across the board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJX7k31AAoJELescNyEwWM0XX0H/iOaWCfKlWOhvBsStGUCsLrK
 XryTzQT2KjdnLKf3jwP+1ateCuBR5ROurYxoDCX5/7mD63c5KiI338Vbv61a1lE1
 AAwjt1stmQVUg/j+kqnuQwB/0DYg+2C8se3D3q5Iyn7zc19cDZJEGcBHNrvLMufc
 XgHrgHgl/rzBDDlHJXleknDFge/MfhU5/Q1vJMRRb4JYrpAtmIokzCO75CYMRcCT
 ND2QbmppKtsyuFPGUTVbAFzJlP6dGKb3eruYta7/ct5d0pJQxav3u98D2yWGfjdM
 YaYq1EmX5Pol7rWumqLtk0+mA9yCFcKLLc+PrJu20Vx0UkvOq8G8Xt70sHNvZU8=
 =gdPM
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "It's a bit all over the place this time with no "killer feature" to
  speak of.  Support for mismatched cache line sizes should help people
  seeing whacky JIT failures on some SoCs, and the big.LITTLE perf
  updates have been a long time coming, but a lot of the changes here
  are cleanups.

  We stray outside arch/arm64 in a few areas: the arch/arm/ arch_timer
  workaround is acked by Russell, the DT/OF bits are acked by Rob, the
  arch_timer clocksource changes acked by Marc, CPU hotplug by tglx and
  jump_label by Peter (all CC'd).

  Summary:

   - Support for execute-only page permissions
   - Support for hibernate and DEBUG_PAGEALLOC
   - Support for heterogeneous systems with mismatches cache line sizes
   - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
   - arm64 PMU perf updates, including cpumasks for heterogeneous systems
   - Set UTS_MACHINE for building rpm packages
   - Yet another head.S tidy-up
   - Some cleanups and refactoring, particularly in the NUMA code
   - Lots of random, non-critical fixes across the board"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (100 commits)
  arm64: tlbflush.h: add __tlbi() macro
  arm64: Kconfig: remove SMP dependence for NUMA
  arm64: Kconfig: select OF/ACPI_NUMA under NUMA config
  arm64: fix dump_backtrace/unwind_frame with NULL tsk
  arm/arm64: arch_timer: Use archdata to indicate vdso suitability
  arm64: arch_timer: Work around QorIQ Erratum A-008585
  arm64: arch_timer: Add device tree binding for A-008585 erratum
  arm64: Correctly bounds check virt_addr_valid
  arm64: migrate exception table users off module.h and onto extable.h
  arm64: pmu: Hoist pmu platform device name
  arm64: pmu: Probe default hw/cache counters
  arm64: pmu: add fallback probe table
  MAINTAINERS: Update ARM PMU PROFILING AND DEBUGGING entry
  arm64: Improve kprobes test for atomic sequence
  arm64/kvm: use alternative auto-nop
  arm64: use alternative auto-nop
  arm64: alternative: add auto-nop infrastructure
  arm64: lse: convert lse alternatives NOP padding to use __nops
  arm64: barriers: introduce nops and __nops macros for NOP sequences
  arm64: sysreg: replace open-coded mrs_s/msr_s with {read,write}_sysreg_s
  ...
2016-10-03 08:58:35 -07:00
Christoph Hellwig 0d5b0cf246 fs: update atime before I/O in generic_file_read_iter
After the call to ->direct_IO the final reference to the file might have
been dropped by aio_complete already, and the call to file_accessed might
cause a use after free.

Instead update the access time before the I/O, similar to how we
update the time stamps before writes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-10-03 09:48:08 +11:00
Rafael J. Wysocki 993eb0aeae Merge branches 'pm-devfreq' and 'pm-sleep'
* pm-devfreq:
  PM / devfreq: rk3399_dmc: Remove explictly regulator_put call in .remove
  PM / devfreq: rockchip: add PM_DEVFREQ_EVENT dependency
  partial revert of "PM / devfreq: Add COMPILE_TEST for build coverage"
  PM / devfreq: rockchip: add devfreq driver for rk3399 dmc
  Documentation: bindings: add dt documentation for rk3399 dmc
  PM / devfreq: event: support rockchip dfi controller
  Documentation: bindings: add dt documentation for dfi controller
  PM / devfreq: event: remove duplicate devfreq_event_get_drvdata()
  PM / devfreq: fix Kconfig indent style
  PM / devfreq: Add COMPILE_TEST for build coverage
  PM / devfreq: exynos-ppmu: remove unneeded of_node_put()

* pm-sleep:
  PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO
  PM / sleep: enable suspend-to-idle even without registered suspend_ops
  PM / sleep: Increase default DPM watchdog timeout to 120
2016-10-02 01:43:45 +02:00