Pull networking fixes from David Miller:
1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb
drivers).
2) Revert returning -EEXIST from __dev_alloc_name() as this propagates
to userspace and broke some apps. From Johannes Berg.
3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong
Wang.
4) Gianfar MAC can't do EEE so don't advertise it by default, from
Claudiu Manoil.
5) Relax strict netlink attribute validation, but emit a warning. From
David Ahern.
6) Fix regression in checksum offload of thunderx driver, from Florian
Westphal.
7) Fix UAPI bpf issues on s390, from Hendrik Brueckner.
8) New card support in iwlwifi, from Ihab Zhaika.
9) BBR congestion control bug fixes from Neal Cardwell.
10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren.
11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan.
12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni.
13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
net: mvpp2: fix the RSS table entry offset
tcp: evaluate packet losses upon RTT change
tcp: fix off-by-one bug in RACK
tcp: always evaluate losses in RACK upon undo
tcp: correctly test congestion state in RACK
bnxt_en: Fix sources of spurious netpoll warnings
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
tcp_bbr: reset full pipe detection on loss recovery undo
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
sfc: pass valid pointers from efx_enqueue_unwind
gianfar: Disable EEE autoneg by default
tcp: invalidate rate samples during SACK reneging
can: peak/pcie_fd: fix potential bug in restarting tx queue
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: mcba_usb: cancel urb on -EPROTO
usbnet: fix alignment for frames with no ethernet header
tcp: use current time in tcp_rcv_space_adjust()
...
There were two trivial updates to these upstream UAPI headers:
arch/s390/include/uapi/asm/kvm.h
arch/s390/include/uapi/asm/kvm_perf.h
arch/x86/lib/x86-opcode-map.txt
Synchronize them with their tooling copies.
(The x86 opcode map includes a new instruction pattern now.)
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The regs_query_register_offset() helper function converts
register name like "%r0" to an offset of a register in user_pt_regs
It is required by the BPF prologue generator.
The user_pt_regs structure was recently added to "asm/ptrace.h".
Hence, update tools/perf/check-headers.sh to keep the header file
in sync with kernel changes.
Suggested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To add support for the MAP_SYNC flag introduced in:
b6fb293f24 ("mm: Define MAP_SYNC and VM_SYNC flags")
Update tools/perf/trace/beauty/mmap.c to support that flag.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman.h' differs from latest version at 'include/uapi/asm-generic/mman.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-14zyk3iywrj37c7g1eagmzbo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test case 21 (Number of exit events of a simple workload) fails on
s390x. The reason is the invalid sample frequency supplied for this
test. On s390x the minimum sample frequency is much higher (see output
of /proc/service_levels).
Supply a save sample frequency value for s390x to fix this. The value
will be adjusted by the s390x CPUMF frequency convertion function to a
value well below the sysctl kernel.perf_event_max_sample_rate value.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
LPU-Reference: 20171123114611.93397-1-tmricht@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-1ynblyhi1n81idpido59nt1y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Certain systems are designed to have sparse/discontiguous nodes. On
such systems, 'perf bench numa' hangs, shows wrong number of nodes and
shows values for non-existent nodes. Handle this by only taking nodes
that are exposed by kernel to userspace.
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1edbcd353c009e109e93d78f2f46381930c340fe.1511368645.git.sathnaga@linux.vnet.ibm.com
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for SA_SIGINFO data in SIGWINCH handler, switching it to
register the handler via signal interface as we do for the rest of the
signals in perf top.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-elxp1vdnaog1scaj13cx7cu0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stdio perf top crashes when we change the terminal
window size. The reason is that we assumed we get the
perf_top pointer as a signal handler argument which is
not the case.
Changing the SIGWINCH handler logic to change global
resize variable, which is checked in the main thread
loop.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ysuzwz77oev1ftgvdscn9bpu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If all events have attr.exclude_kernel set, no need to look at
kptr_restrict.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yegpzg5bf2im69g0tfizqaqz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we're not sampling the kernel, we shouldn't care about kptr_restrict
neither synthesize anything for assisting in resolving kernel samples,
like the reference relocation symbol or kernel modules information.
Before:
$ cat /proc/sys/kernel/kptr_restrict /proc/sys/kernel/perf_event_paranoid
2
2
$ perf record sleep 1
WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted,
check /proc/sys/kernel/kptr_restrict.
Samples in kernel functions may not be resolved if a suitable vmlinux
file is not found in the buildid cache or in the vmlinux path.
Samples in kernel modules won't be resolved at all.
If some relocation was applied (e.g. kexec) symbols may be misresolved
even with a suitable vmlinux or kallsyms file.
Couldn't record kernel reference relocation symbol
Symbol resolution may be skewed if relocation was used (e.g. kexec).
Check /proc/kallsyms permission or run as root.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
$ perf evlist -v
cycles:uppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
After:
$ perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (10 samples) ]
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t025e9zftbx2b8cq2w01g5e5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If none of the evsels has attr.exclude_kernel set to zero, no kernel
samples, so no point in warning the user about problems in processing
kernel samples, as there will be none.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7dn926v3at8txxkky92aesz2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The warning about kptr_restrict needs to be emitted only when it is set
and we ask for kernel space samples, so add a helper to help with that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fh7drty6yljei9gxxzer6eup@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf test' case "probe libc's inet_pton & backtrace it with ping"
fails on s390x. The reason is the 'realpath /lib64/ld*.so.* | uniq' line
which returns 2 libraries:
root@s35lp76 shell]# realpath /lib64/ld*.so.* | uniq
/usr/lib64/ld-2.26.so
/usr/lib64/ld_pre_smc.so.1.0.1
[root@s35lp76 shell]
This output makes the "perf probe" command lines invalid.
Use ldd tool to find out the libraries required by "bash" and check if
symbol "inet_pton" is part of the "libc" library. Some distros do not
have a /lib64 directory.
I have also added a check for the existence of an IPv6 network interface
before it is being used.
Committer changes:
We can't really use ldd for libc, as in some systems, such as x86_64, it
has hardlinks and then ldd sees one and the kernel the other, so grep
for libc in /proc/self/maps to get the one we'll receive from
PERF_RECORD_MMAP.
Thomas checked this change and acked it.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Suggested-by: Hendrik Brückner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brückner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20171114133409.GN8836@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This 'perf test' case fails on s390x. The 'touch' command on s390x uses
the 'openat' system call to open the file named on the command line:
[root@s35lp76 perf]# perf probe -l
probe:vfs_getname (on getname_flags:72@fs/namei.c with pathname)
[root@s35lp76 perf]# perf trace -e open touch /tmp/abc
0.400 ( 0.015 ms): touch/27542 open(filename:
/usr/lib/locale/locale-archive, flags: CLOEXEC) = 3
[root@s35lp76 perf]#
There is no 'open' system call for file '/tmp/abc'. Instead the 'openat'
system call is used:
[root@s35lp76 perf]# strace touch /tmp/abc
execve("/usr/bin/touch", ["touch", "/tmp/abc"], 0x3ffd547ec98
/* 30 vars */) = 0
[...]
openat(AT_FDCWD, "/tmp/abc", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK, 0666) = 3
[...]
On s390x the 'egrep' command does not find a matching pattern and
returns an error.
Fix this for s390x create a platform dependent command line to enable
the 'perf probe' call to listen to the 'openat' system call and get the
expected output.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20171114071847.2381-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-3qf38jk0prz54rhmhyu871my@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are many instructions, esp on PowerPC, whose mnemonics are longer
than 6 characters. Using precision limit causes truncation of such
mnemonics.
Fix this by removing precision limit. Note that, 'width' is still 6, so
alignment won't get affected for length <= 6.
Before:
li r11,-1
xscvdp vs1,vs1
add. r10,r10,r11
After:
li r11,-1
xscvdpsxds vs1,vs1
add. r10,r10,r11
Reported-by: Donald Stence <dstence@us.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20171114032540.4564-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 8e99b6d453 changed prefixcmp() to strstart() but missed to
change the return value in some place. It makes perf help print
annoying output even for sane config items like below:
$ perf help
'.root': unsupported man viewer sub key.
...
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sihyeon Jang <uneedsihyeon@gmail.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20171114001542.GA16464@sejong
Fixes: 8e99b6d453 ("tools include: Adopt strstarts() from the kernel")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A recent fix for 'perf trace' introduced a bug where
machine__exit(trace->host) could be called while trace->host was still
NULL, so make this more robust by guarding against NULL, just like
free() does.
The problem happens, for instance, when !root users try to run 'perf
trace':
[acme@jouet linux]$ trace
Error: No permissions to read /sys/kernel/debug/tracing/events/raw_syscalls/sys_(enter|exit)
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
perf: Segmentation fault
Obtained 7 stack frames.
[0x4f1b2e]
/lib64/libc.so.6(+0x3671f) [0x7f43a1dd971f]
[0x4f3fec]
[0x47468b]
[0x42a2db]
/lib64/libc.so.6(__libc_start_main+0xe9) [0x7f43a1dc3509]
[0x42a6c9]
Segmentation fault (core dumped)
[acme@jouet linux]$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 33974a414c ("perf trace: Call machine__exit() at exit")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When processing PERF_RECORD_AUXTRACE_INFO several perf_evsel entries
will be synthesized and inserted into session->evlist, eventually ending
in perf_script.tool.sample(), which ends up calling builtin-script.c's
process_event(), that expects evsel->priv to be a perf_evsel_script
object with a valid FILE pointer in fp.
So we need to intercept the processing of PERF_RECORD_AUXTRACE_INFO and
then setup evsel->priv for these newly created perf_evsel instances, do
it to fix the segfault in process_event() trying to use a NULL for that
FILE pointer.
Reported-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Fixes: a14390fde6 ("perf script: Allow creating per-event dump files")
Link: http://lkml.kernel.org/n/tip-bthnur8r8de01gxvn2qayx6e@git.kernel.org
[ Merge fix by Ravi Bangoria before pushing upstream to preserv bisectability ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I forgot one conversion, which got noticed by Thomas when running:
$ perf stat -e '{cpu-clock,instructions}' kill
kill: not enough arguments
Segmentation fault (core dumped)
$
Fix it, those stats are in evsel->stats, not anymore in evsel->priv.
Reported-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: e669e833da ("perf evsel: Restore evsel->priv as a tool private area")
Link: http://lkml.kernel.org/r/20171109150046.GN4333@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently if trace_event__register_resolver() fails, we return -errno,
but we can't be sure that errno isn't zero in this case.
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vasily Averin <vvs@virtuozzo.com>
Link: http://lkml.kernel.org/r/20171108002246.8924-2-avagin@openvz.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Intel PMU event aliases have a implicit period= specifier to set the
default period.
Unfortunately this breaks overriding these periods with -c or -F,
because the alias terms look like they are user specified to the
internal parser, and user specified event qualifiers override the
command line options.
Track that they are coming from aliases by adding a "weak" state to the
term. Any weak terms don't override command line options.
I only did it for -c/-F for now, I think that's the only case that's
broken currently.
Before:
$ perf record -c 1000 -vv -e uops_issued.any
...
{ sample_period, sample_freq } 2000003
After:
$ perf record -c 1000 -vv -e uops_issued.any
...
{ sample_period, sample_freq } 1000
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171020202755.21410-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use an initial delay, e.g.: 'perf record --delay 1000', we do not
enable the events until that delay has passed after we started the workload,
including the tracking event, i.e. the one for which we have attr.mmap, etc,
enabled to ask the kernel to generate the PERF_RECORD_{MMAP,COMM,EXEC} metadata
events that will then allow us to resolve addresses in samples to the map, dso
and symbol. There will be a shadow that even synthesizing samples won't cover,
i.e. the workload that we start and other processes forking while we
wait for the initial delay to expire.
So use a dummy event to be the tracking one and make it be enabled on exec.
Before:
# perf record --delay 1000 stress --cpu 1 --timeout 5
stress: info: [9029] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd
stress: info: [9029] successful run completed in 5s
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.624 MB perf.data (15908 samples) ]
# perf script | head
:9031 9031 32001.826888: 1 cycles:ppp: ffffffff831aa30d event_function (/lib/modules/4.14.0-rc6+/build/vmlinux)
:9031 9031 32001.826893: 1 cycles:ppp: ffffffff8300d1a0 intel_bts_enable_local (/lib/modules/4.14.0-rc6+/build/vmlinux)
:9031 9031 32001.826895: 7 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
:9031 9031 32001.826897: 103 cycles:ppp: ffffffff8300c331 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux)
:9031 9031 32001.826899: 1615 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
:9031 9031 32001.826902: 26724 cycles:ppp: ffffffff8384c6a7 native_irq_return_iret (/lib/modules/4.14.0-rc6+/build/vmlinux)
:9031 9031 32001.826913: 329739 cycles:ppp: 7fb2a5410932 [unknown] ([unknown])
:9031 9031 32001.827033: 1225451 cycles:ppp: 7fb2a5410930 [unknown] ([unknown])
:9031 9031 32001.827474: 1391725 cycles:ppp: 7fb2a5410930 [unknown] ([unknown])
:9031 9031 32001.827978: 1233697 cycles:ppp: 7fb2a5410928 [unknown] ([unknown])
#
After:
# perf record --delay 1000 stress --cpu 1 --timeout 5
stress: info: [9741] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd
stress: info: [9741] successful run completed in 5s
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.751 MB perf.data (15976 samples) ]
# perf script | head
stress 9742 32110.959106: 1 cycles:ppp: ffffffff831b26f6 __perf_event_task_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux)
stress 9742 32110.959110: 1 cycles:ppp: ffffffff8300c2e9 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux)
stress 9742 32110.959112: 7 cycles:ppp: ffffffff830231e0 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
stress 9742 32110.959115: 101 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
stress 9742 32110.959117: 1533 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux)
stress 9742 32110.959119: 23992 cycles:ppp: ffffffff831b0900 ctx_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux)
stress 9742 32110.959129: 329406 cycles:ppp: 7f4b1b661930 __random_r (/usr/lib64/libc-2.25.so)
stress 9742 32110.959249: 1288322 cycles:ppp: 5566e1e7cbc9 hogcpu (/usr/bin/stress)
stress 9742 32110.959712: 1464046 cycles:ppp: 7f4b1b66179e __random (/usr/lib64/libc-2.25.so)
stress 9742 32110.960241: 1266918 cycles:ppp: 7f4b1b66195b __random_r (/usr/lib64/libc-2.25.so)
#
Reported-by: Bram Stolk <b.stolk@gmail.com>
Tested-by: Bram Stolk <b.stolk@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 6619a53ef7 ("perf record: Add --initial-delay option")
Link: http://lkml.kernel.org/n/tip-nrdfchshqxf7diszhxcecqb9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evsel->idx field is used mainly to access the right bucket in
per-event arrays such as the annotation ones, but also to set
evsel->tracking, that in turn will decide what of the events will ask
for PERF_RECORD_{MMAP,COMM,EXEC} to be generated, i.e. which
perf_event_attr will have its mmap, etc fields set.
When we were adding the "dummy" event using perf_evlist__add_dummy() we
were not setting it correctly, which could result in multiple tracking
events.
Now that I'll try using a dummy event to be the tracking one when using
'perf record --delay', i.e. when we process the --delay
setting we may already have the evlist set up, like with:
perf record -e cycles,instructions --delay 1000 ./workload
We will need to add a "dummy" event, then reset evsel->tracking for the
first event, "cycles", and set it instead to the dummy one, and also
setting its attr.enable_on_exec, so that we get the PERF_RECORD_MMAP,
etc metadata events while waiting to enable the explicitely requested
events, so lets get this straight and set the right evsel->idx.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bram Stolk <b.stolk@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nrdfchshqxf7diszhxcecqb9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull second round of s390 updates from Martin Schwidefsky:
- rework of the vdso code to avoid the use of the access register mode
- use perf AUX buffers for the transport of diagnostic sample data
- add perf_regs and user stack dump support
- enable perf call graphs for user space programs
- add perf register support for floating-point registers
- all remaining s390 related timer_setup conversions
- bug fixes and cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (30 commits)
s390: remove unused parameter from Makefile
zfcp: purely mechanical update using timer API, plus blank lines
s390/scsi: Convert timers to use timer_setup()
s390/cpum_sf: correctly set the PID and TID in perf samples
s390/cpum_sf: load program parameter at sampler enablement
s390/perf: add perf register support for floating-point registers
s390/perf: extend perf_regs support to include floating-point registers
s390/perf: define common DWARF register string table
s390/perf: add support for perf_regs and libdw
s390/perf: add perf_regs support and user stack dump
s390/cpum_sf: do not register PMU if no sampling mode is authorized
s390/cpumf: remove raw event support in basic-only sampling mode
s390/perf: add callback to perf to enable using AUX buffer
s390/cpumf: enable using AUX buffer
s390/cpumf: introduce AUX buffer for dump diagnostic sample data
s390/disassembler: increase show_code buffer size
s390: Remove CONFIG_HARDENED_USERCOPY
s390: enable CPU alternatives unconditionally
s390/nmi: remove unused code
s390/mm: remove unused code
...
For correct unwinding of user space processes, the floating-point
register contents are required. For example, leaf functions might
use fp registers to temporarily store the return address.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Instead of defining DWARF register to string table in dwarf-regs-table.h
and dwarf-regs.c, use a common table in dwarf-regs-table.h.
Ensure that the DWARF register table is up-to-date with
http://refspecs.linuxfoundation.org/ELF/zSeries/lzsabi0_s390/x1542.html.
For unwinding with libdw, also ensure to correctly setup the DWARF
register frame according to the register mappings. Currently, libdw
supports up to 32 registers only.
Suggested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With support for perf_regs and libdw, you can record and report
call graphs for user space programs. Simply invoke perf with
the --call-graph=dwarf command line option.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[brueckner: added dwfl_thread_state_register_pc() call]
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Perf tool need implement a callback to enable using AUX buffer. Perf
will do another mmap() to trigger the setup of AUX buffer in kernel
if there is such callback. The default size of the AUX buffer is set
properly according to the sampling frequency to avoid overflow. It
could also be manually set by -m option of perf.
The interface of perf is not changed. Diagnostic mode sampling
could be started by `perf record -e rBD000` like before.
Signed-off-by: Pu Hou <bjhoupu@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
As the page free path makes no distinction between cache hot and cold
pages, there is no real useful ordering of pages in the free list that
allocation requests can take advantage of. Juding from the users of
__GFP_COLD, it is likely that a number of them are the result of copying
other sites instead of actually measuring the impact. Remove the
__GFP_COLD parameter which simplifies a number of paths in the page
allocator.
This is potentially controversial but bear in mind that the size of the
per-cpu pagelists versus modern cache sizes means that the whole per-cpu
list can often fit in the L3 cache. Hence, there is only a potential
benefit for microbenchmarks that alloc/free pages in a tight loop. It's
even worse when THP is taken into account which has little or no chance
of getting a cache-hot page as the per-cpu list is bypassed and the
zeroing of multiple pages will thrash the cache anyway.
The truncate microbenchmarks are not shown as this patch affects the
allocation path and not the free path. A page fault microbenchmark was
tested but it showed no sigificant difference which is not surprising
given that the __GFP_COLD branches are a miniscule percentage of the
fault path.
Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that kmemcheck is gone, we don't need the NOTRACK flags.
Link: http://lkml.kernel.org/r/20171007030159.22241-5-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Hansen <devtimhansen@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel:
- kprobes updates: use better W^X patterns for code modifications,
improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook)
- core fixes: event timekeeping (enabled/running times statistics)
fixes, perf_event_read() locking fixes and cleanups, etc. (Peter
Zijlstra)
- Extend x86 Intel free-running PEBS support and support x86
user-register sampling in perf record and perf script. (Andi Kleen)
Tooling:
- Completely rework the way inline frames are handled. Instead of
querying for the inline nodes on-demand in the individual tools, we
now create proper callchain nodes for inlined frames. (Milian
Wolff)
- 'perf trace' updates (Arnaldo Carvalho de Melo)
- Implement a way to print formatted output to per-event files in
'perf script' to facilitate generate flamegraphs, elliminating the
need to write scripts to do that separation (yuzhoujian, Arnaldo
Carvalho de Melo)
- Update vendor events JSON metrics for Intel's Broadwell, Broadwell
Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown,
Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi
Kleen, Kan Liang)
- Multithread the synthesizing of PERF_RECORD_ events for
pre-existing threads in 'perf top', speeding up that phase, greatly
improving the user experience in systems such as Intel's Knights
Mill (Kan Liang)
- Introduce the concept of weak groups in 'perf stat': try to set up
a group, but if it's not schedulable fallback to not using a group.
That gives us the best of both worlds: groups if they work, but
still a usable fallback if they don't. E.g: (Andi Kleen)
- perf sched timehist enhancements (David Ahern)
- ... various other enhancements, updates, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits)
kprobes: Don't spam the build log with deprecation warnings
arm/kprobes: Remove jprobe test case
arm/kprobes: Fix kretprobe test to check correct counter
perf srcline: Show correct function name for srcline of callchains
perf srcline: Fix memory leak in addr2inlines()
perf trace beauty kcmp: Beautify arguments
perf trace beauty: Implement pid_fd beautifier
tools include uapi: Grab a copy of linux/kcmp.h
perf callchain: Fix double mapping al->addr for children without self period
perf stat: Make --per-thread update shadow stats to show metrics
perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats
perf tools: Add perf_data_file__write function
perf tools: Add struct perf_data_file
perf tools: Rename struct perf_data_file to perf_data
perf script: Print information about per-event-dump files
perf trace beauty prctl: Generate 'option' string table from kernel headers
tools include uapi: Grab a copy of linux/prctl.h
perf script: Allow creating per-event dump files
perf evsel: Restore evsel->priv as a tool private area
perf script: Use event_format__fprintf()
...
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
Looks like I've reached the new level of stupidity, adding missing braces.
Committer testing:
Given the following eBPF C filter, that will add a record when it
returns true, i.e. when the tv_nsec variable is > 2000ns, should be
built and installed via sys_bpf(), but fails to do so before this patch:
# cat filter.c
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
SEC("func=hrtimer_nanosleep rqtp->tv_nsec")
int func(void *ctx, int err, long nsec)
{
return nsec > 1000;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
#
# perf trace -e nanosleep,filter.c usleep 1
invalid or unsupported event: 'filter.c'
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
And works again after it is applied, the nothing is inserted when the co
# perf trace -e *sleep,filter.c usleep 1
0.000 ( 0.066 ms): usleep/23994 nanosleep(rqtp: 0x7ffead94a0d0) = 0
# perf trace -e *sleep,filter.c usleep 2
0.000 ( 0.008 ms): usleep/24378 nanosleep(rqtp: 0x7fffa021ba50) ...
0.008 ( ): perf_bpf_probe:func:(ffffffffb410cb30) tv_nsec=2000)
0.000 ( 0.066 ms): usleep/24378 ... [continued]: nanosleep()) = 0
#
The intent of 9445464bb8 is kept:
# perf stat -e 'cpu/uops_executed.core,krava/' true
event syntax error: '..cuted.core,krava/'
\___ unknown term
valid terms: cmask,pc,event,edge,in_tx,any,ldlat,inv,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
#
# perf stat -e 'cpu/uops_executed.core,period=1/' true
Performance counter stats for 'true':
808,332 cpu/uops_executed.core,period=1/
0.002997237 seconds time elapsed
#
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 9445464bb8 ("perf tools: Unwind properly location after REJECT")
Link: http://lkml.kernel.org/n/tip-diea0ihbwpxfw6938huv3whj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo reported broken builds in some distros using a newer flex
release, 2.6.4, found in Alpine Linux 3.6 and Edge, with flex not
spotting the REJECT macro:
CC /tmp/build/perf/util/parse-events-flex.o
util/parse-events.l: In function 'parse_events_lex':
/tmp/build/perf/util/parse-events-flex.c:4734:16: error: \
'reject_used_but_not_detected' undeclared (first use in this function)
It's happening because we put the REJECT under another USER_REJECT macro
in following commit:
9445464bb8 perf tools: Unwind properly location after REJECT
Fortunately flex provides option for force it to use REJECT, adding it
to parse-events.l.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 9445464bb8 ("perf tools: Unwind properly location after REJECT")
Link: http://lkml.kernel.org/n/tip-7kdont984mw12ijk7rji6b8p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When libbfd is not used, it doesn't show proper function name and reuse
the original symbol of the sample. That's because it passes the
original sym to inline_list__append(). As `addr2line -f` returns
function names as well, use that to create an inline_sym and pass it to
inline_list__append().
For example, following data shows that inlined entries of main have same
name (main).
Before:
$ perf report -g srcline -q | head
45.22% inlining libm-2.26.so [.] __hypot_finite
|
---__hypot_finite ??:0
|
|--44.15%--hypot ??:0
| main complex:589
| main complex:597
| main complex:654
| main complex:664
| main inlining.cpp:14
After:
$ perf report -g srcline -q | head
45.22% inlining libm-2.26.so [.] __hypot_finite
|
---__hypot_finite
|
|--44.15%--hypot
| std::__complex_abs complex:589 (inlined)
| std::abs<double> complex:597 (inlined)
| std::_Norm_helper<true>::_S_do_it<double> complex:654 (inlined)
| std::norm<double> complex:664 (inlined)
| main inlining.cpp:14
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20171031020654.31163-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libbfd is not used, addr2inlines() executes `addr2line -i` and
process output line by line. But it resets filename to NULL in the loop
so getline() allocates additional memory everytime instead of realloc.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20171031020654.31163-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some unknown reason there is no entry in tracefs's syscalls for
kcmp, i.e. no tracefs/events/syscalls/sys_{enter,exit}_kcmp, so we need
to provide a data dictionary for the fields.
To beautify the 'type' argument we automatically generate a strarray
from tools/include/uapi/kcmp.h, the idx1 and idx2 args, nowadays used
only if type == KCMP_FILE, are masked for all the other types and a
lookup is made for the thread and fd to show the path, if possible,
getting it from the probe:vfs_getname if in place or from procfs, races
allowing.
A system wide strace like tracing session, with callchains shows just
one user so far in this fedora 25 machine:
# perf trace --max-stack 5 -e kcmp
<SNIP>
1502914.400 ( 0.001 ms): systemd/1 kcmp(pid1: 1 (systemd), pid2: 1 (systemd), type: FILE, idx1: 271<socket:[4723475]>, idx2: 25<socket:[4788686]>) = -1 ENOSYS Function not implemented
syscall (/usr/lib64/libc-2.25.so)
same_fd (/usr/lib/systemd/libsystemd-shared-233.so)
service_add_fd_store (/usr/lib/systemd/systemd)
service_notify_message.lto_priv.127 (/usr/lib/systemd/systemd)
1502914.407 ( 0.001 ms): systemd/1 kcmp(pid1: 1 (systemd), pid2: 1 (systemd), type: FILE, idx1: 270<socket:[4726396]>, idx2: 25<socket:[4788686]>) = -1 ENOSYS Function not implemented
syscall (/usr/lib64/libc-2.25.so)
same_fd (/usr/lib/systemd/libsystemd-shared-233.so)
service_add_fd_store (/usr/lib/systemd/systemd)
service_notify_message.lto_priv.127 (/usr/lib/systemd/systemd)
<SNIP>
The backtraces seem to agree this is really kcmp(), but this system
doesn't have the sys_kcmp(), bummer:
# uname -a
Linux jouet 4.14.0-rc3+ #1 SMP Fri Oct 13 12:21:12 -03 2017 x86_64 x86_64 x86_64 GNU/Linux
# grep kcmp /proc/kallsyms
ffffffffb60b8890 W sys_kcmp
$ grep CONFIG_CHECKPOINT_RESTORE ../build/v4.14.0-rc3+/.config
# CONFIG_CHECKPOINT_RESTORE is not set
$
So systemd uses it, good fedora kernel config has it:
$ grep CONFIG_CHECKPOINT_RESTORE /boot/config-4.13.4-200.fc26.x86_64
CONFIG_CHECKPOINT_RESTORE=y
[acme@jouet linux]$
/me goes to rebuild a kernel...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-gz5fca968viw8m7hryjqvrln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One that given a pid and a fd, will try to get the path for that fd.
Will be used in the upcoming kcmp's KCMP_FILE beautifier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7ketygp2dvs9h13wuakfncws@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to generate tables for beautifying kcmp's 'type' arg.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-r35zr79invmpinfe1zu57cas@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Milian Wolff found a problem he described in [1] and that for him would
get fixed:
"Note how most of the large offset values are now gone. Most notably, we
get proper srcline resolution for the random.h and complex headers."
Then Namhyung found the root cause:
"I looked into it and found a bug handling cumulative (children)
entries. For children entries that have no self period, the al->addr (so
he->ip) ends up having an doubly-mapped address.
It seems to be there from the beginning but only affects entries that
have no srclines - finding srcline itself is done using a different
address but it will show the invalid address if no srcline was found. I
think we should fix the commit c7405d85d7 ("perf tools: Update cpumode
for each cumulative entry")."
[1] https://lkml.kernel.org/r/20171018185350.14893-7-milian.wolff@kdab.com
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: kernel-team@lge.com
Fixes: c7405d85d7 ("perf tools: Update cpumode for each cumulative entry")
Link: https://lkml.kernel.org/r/20171020051533.GA2746@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should support this because it would allow easily to collect metrics
for different threads in applications.
Original patch from posted by Jin Yao in here [1].
1. Current output, for example:
root@skl:/tmp# perf stat --per-thread -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 0.517479 task-clock (msec) # 0.000 CPUs utilized
vmstat-21623 1 context-switches
vmstat-21623 0 cpu-migrations
vmstat-21623 0 page-faults
vmstat-21623 461,306 cycles
vmstat-21623 630,724 instructions
vmstat-21623 136,265 branches
vmstat-21623 2,520 branch-misses
1.444020756 seconds time elapsed
root@skl:/tmp# perf stat --per-thread --metrics ipc -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 631,185 inst_retired.any
vmstat-21623 605,893 cpu_clk_unhalted.thread
1.415679293 seconds time elapsed
2. With this patch, the result would be:
root@skl:/tmp# perf stat --per-thread -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 0.533759 task-clock (msec) # 0.000 CPUs utilized
vmstat-21623 1 context-switches # 0.002 M/sec
vmstat-21623 0 cpu-migrations # 0.000 K/sec
vmstat-21623 0 page-faults # 0.000 K/sec
vmstat-21623 473,896 cycles # 0.888 GHz
vmstat-21623 631,072 instructions # 1.33 insn per cycle
vmstat-21623 136,307 branches # 255.372 M/sec
vmstat-21623 2,524 branch-misses # 1.85% of all branches
1.544862861 seconds time elapsed
root@skl:/tmp# perf stat --per-thread --metrics ipc -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 1,259,104 inst_retired.any # 1.2 IPC
vmstat-21623 1,056,756 cpu_clk_unhalted.thread
2.040954502 seconds time elapsed
[1] https://marc.info/?l=linux-kernel&m=150777054620511&w=2
Originally-from: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tr8ntktxmy4qc5769ajg5u6c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the shadow stats scale computation to the
perf_stat__update_shadow_stats() function, so it's centralized and we
don't forget to do it. It also saves few lines of code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-htg7mmyxv6pcrf57qyo6msid@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_data_file__write function to provide single file write
operation.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds