We want those fixes (iio primarily) into the -next branch to help with
merge and testing issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes explicit NULL comparison and writes it in its
shorter form. Detected with coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes explicit NULL comparison and replaces it with
its shorter form. Detected with coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes explicit NULL comparison and replaces it
with its shorter form. Detected with coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch checks if an error occurred on probe and stops the
device in order to avoid wasting power.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New Functionality
* Watermark logic for buffers. Allows for blocking reads to block until
their requested amount is available - previously they only blocked until
a single scan of data was available. Also allows for polling for a
watermark amount of data to be available. This feature was first proposed
some time ago to good responses, but not taken further by the original author
Octavian has picked up the gauntlet and taken it through
to merging (along with the hardware fifo support that follows).
* New approach to hardware fifo handling - in particular handling the
interaction of a hardware fifo feeding into a software fifo and their
watershed events. We don't have every possible case well covered yet,
but this is certainly a good, flexible starting point. This will replace
the previous approach used in ancient drivers (sca3000) where we just
exposed the hardware buffer directly to userspace. Very few pieces of
hardware have sufficiently long buffers for that to be an adequate solution.
* bmc150_accel - hardware fifo support.
* mlx90614 - support dual IR sensor devices + some refactoring to clean up the
code and allow some other functionality currently under review.
* L3GD20H gyroscope support added to the st_gyro driver.
* lis3lv02d accelerometer added to the st_gyro driver. Note this part is
also supported by the older lis3 driver under misc. A lengthy discussion
took place and concluded that holding parts out on the basis that whole
driver would be subsumed into this one was counter productive. Better
to add part support and add additional features as people need them.
Basically there was not advantage in not merging the support.
* max517 driver gains support for MAX520 and MAX521 DACs.
Documentation
* 3.20 -> 4.0 renaming for recent docs. Whilst technically a fix, I think
people will cope until the next merge merge window.
* An ABI typo hat -> What: More ABIs should have hats.
* Document in_rot_offset, illuminance_raw and illuminance_scale.
Cleanups
* Fix a scale extraction bug in generic_buffer.c example.
* Constify a load of device tree related structures.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=kqSc
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new devices, functionality and cleanup for IIO in the 4.1 cycle.
New Functionality
* Watermark logic for buffers. Allows for blocking reads to block until
their requested amount is available - previously they only blocked until
a single scan of data was available. Also allows for polling for a
watermark amount of data to be available. This feature was first proposed
some time ago to good responses, but not taken further by the original author
Octavian has picked up the gauntlet and taken it through
to merging (along with the hardware fifo support that follows).
* New approach to hardware fifo handling - in particular handling the
interaction of a hardware fifo feeding into a software fifo and their
watershed events. We don't have every possible case well covered yet,
but this is certainly a good, flexible starting point. This will replace
the previous approach used in ancient drivers (sca3000) where we just
exposed the hardware buffer directly to userspace. Very few pieces of
hardware have sufficiently long buffers for that to be an adequate solution.
* bmc150_accel - hardware fifo support.
* mlx90614 - support dual IR sensor devices + some refactoring to clean up the
code and allow some other functionality currently under review.
* L3GD20H gyroscope support added to the st_gyro driver.
* lis3lv02d accelerometer added to the st_gyro driver. Note this part is
also supported by the older lis3 driver under misc. A lengthy discussion
took place and concluded that holding parts out on the basis that whole
driver would be subsumed into this one was counter productive. Better
to add part support and add additional features as people need them.
Basically there was not advantage in not merging the support.
* max517 driver gains support for MAX520 and MAX521 DACs.
Documentation
* 3.20 -> 4.0 renaming for recent docs. Whilst technically a fix, I think
people will cope until the next merge merge window.
* An ABI typo hat -> What: More ABIs should have hats.
* Document in_rot_offset, illuminance_raw and illuminance_scale.
Cleanups
* Fix a scale extraction bug in generic_buffer.c example.
* Constify a load of device tree related structures.
Currently the IIO buffer blocking read only wait until at least one
data element is available.
This patch makes the reader sleep until enough data is collected before
returning to userspace. This should limit the read() calls count when
trying to get data in batches.
Co-author: Yannick Bedhomme <yannick.bedhomme@mobile-devices.fr>
Signed-off-by: Josselin Costanzi <josselin.costanzi@mobile-devices.fr>
[rebased and remove buffer timeout]
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The following patch adds braces on all arms of if statement.
Issue addressed by checkpatch.pl.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds blank line after function declaration.
Issue addressed by checkpatch.pl.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes extra blank lines to address checkpatch.pl warnings
regarding that.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adjust parameters alignment in functions to match
open parenthesis. Issue addressed by checkpatch.pl.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New drivers
* CM3323 color sensor.
* MS5611 pressure and temperature sensor.
New functionality
* mup6050 - create mux clients for devices described via ACPI. The reasoning
and approach taken in this patch are complex. Basically there is no
otherway of finding out what is there than by some esoteric look ups in
the ACPI data.
* cm3232 - PM support
* itg3200 - suspend/resume support
* mcp320x - add more ADCs to the kconfig to reflect what the driver supports
(this patch and the bindings got left behind when the support was added
a while back).
Docs / utils
* ti-adc128s052 - DT bindings.
* mcp3422 - DT bindings.
* mcp320x - DT bindings
* ABI docs for event threshold scale attributes, in_magn_offset, proximity
scan_element and thresh falling/rising values for accelerometers. All
elements long in use that have slipped by being explicitly documented.
* Tidy up the tools previously in drivers/staging/iio/Documentation and move
them out to /tools/iio. Yet another move that should have happened long ago.
This time Roberta Dobrescu did the leg work. Thanks!
Core Cleanups
* Export userspace IIO headers. We should have done the appropriate header
splitting a long time ago. Thanks to Daniel for sorting this out.
* Refactor the registring of attributes for buffers to move all non-custom
ones to a vector allowing easier additions to the current set in the future.
Driver Cleanups
* gpiod related cleanups. Make use of the additional parameter to specify
initial direciton to avoid extra code.
* bmc150 - Various refactorings to reduce code repitition and prepare for
hardware buffer support. Some of these cleanups are good even
without the new functionality.
* kmx61 - direct use of index to an array avoiding a structure element which
was always the index to an element in an array of that structure.
* vf610 - avoid incorrect type for return from wait_for_completion_timeout.
* gp2ap020a00f - use put_unaligned_le32 for slight code simplification.
* ade7754 - improve error handling including suppressing some build warnings.
* ade7759 - improve error handling including suppressing some build warnings.
* hmc5843 - Long line and indentation fixes. Also some constifying of various
constant data.
* ade7854 - 80+ character line splitting.
* ad2s1210 - fix wrong printf format string.
* mxs-lradc - fix wrong printf format string.
* ade7954-i2c - code alignment fixes and other trivial but worthwhile bits.
* periodic rtc trigger - make the frequency type an unsigned int as it
is always treated as such.
* jsa1212 - constify struct regmap_config as it is constant.
* ad7793 - typo in the MODULE_DESCRIPTION
* mma9551 - check gpiod_to_irq errors. Note that this doesn't actually cause
any trouble but is worth tidying up as obviously incorrect.
* mlx90614 - refactor the register symbols to make it clear which reads are to
RAM not PROM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=BmiY
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new drivers, cleanups and functionality for IIO in the 4.1 cycle.
New drivers
* CM3323 color sensor.
* MS5611 pressure and temperature sensor.
New functionality
* mup6050 - create mux clients for devices described via ACPI. The reasoning
and approach taken in this patch are complex. Basically there is no
otherway of finding out what is there than by some esoteric look ups in
the ACPI data.
* cm3232 - PM support
* itg3200 - suspend/resume support
* mcp320x - add more ADCs to the kconfig to reflect what the driver supports
(this patch and the bindings got left behind when the support was added
a while back).
Docs / utils
* ti-adc128s052 - DT bindings.
* mcp3422 - DT bindings.
* mcp320x - DT bindings
* ABI docs for event threshold scale attributes, in_magn_offset, proximity
scan_element and thresh falling/rising values for accelerometers. All
elements long in use that have slipped by being explicitly documented.
* Tidy up the tools previously in drivers/staging/iio/Documentation and move
them out to /tools/iio. Yet another move that should have happened long ago.
This time Roberta Dobrescu did the leg work. Thanks!
Core Cleanups
* Export userspace IIO headers. We should have done the appropriate header
splitting a long time ago. Thanks to Daniel for sorting this out.
* Refactor the registring of attributes for buffers to move all non-custom
ones to a vector allowing easier additions to the current set in the future.
Driver Cleanups
* gpiod related cleanups. Make use of the additional parameter to specify
initial direciton to avoid extra code.
* bmc150 - Various refactorings to reduce code repitition and prepare for
hardware buffer support. Some of these cleanups are good even
without the new functionality.
* kmx61 - direct use of index to an array avoiding a structure element which
was always the index to an element in an array of that structure.
* vf610 - avoid incorrect type for return from wait_for_completion_timeout.
* gp2ap020a00f - use put_unaligned_le32 for slight code simplification.
* ade7754 - improve error handling including suppressing some build warnings.
* ade7759 - improve error handling including suppressing some build warnings.
* hmc5843 - Long line and indentation fixes. Also some constifying of various
constant data.
* ade7854 - 80+ character line splitting.
* ad2s1210 - fix wrong printf format string.
* mxs-lradc - fix wrong printf format string.
* ade7954-i2c - code alignment fixes and other trivial but worthwhile bits.
* periodic rtc trigger - make the frequency type an unsigned int as it
is always treated as such.
* jsa1212 - constify struct regmap_config as it is constant.
* ad7793 - typo in the MODULE_DESCRIPTION
* mma9551 - check gpiod_to_irq errors. Note that this doesn't actually cause
any trouble but is worth tidying up as obviously incorrect.
* mlx90614 - refactor the register symbols to make it clear which reads are to
RAM not PROM.
Fix file header to match Linux Kernel style. Remove Free Software
Foundation reference to silence the checkpatch.pl warning.
Add driver description and correct spelling mistakes.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put device in sleep mode if an error is encountered after
initialization in order to avoid wasting power.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch documents the struct hmc5843 specific data following
this warning:
"CHECK: struct mutex definition without comment".
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename variable in order to fix the 80 characters per line warning.
Found by checkpatch.pl
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes blank uneeded lines in order to remove the folowing
checkpatch.pl warning:
"Please don't use multiple blank lines".
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch improves coding style by aligning parameters in
iio/magnetometer function calls, to remove the following warning:
"CHECK: Alignment should match open parenthesis".
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_* is prefered over pr_* when appropriate device stuct is present.
This patch replace pr_err and pr_warn with its dev_ counterpart.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.
This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@
(
x = devm_kzalloc(...);
|
x = usb_alloc_urb(...);
|
x = kmalloc_array(...);
|
x = devm_ioremap(...);
|
x = alloc_netdev(...);
)
...
- if(NULL == x)
+ if(!x)
S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.
Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add braces to improve consistency when using if statements.
Found by checkpatch.pl:
"CHECK: braces {} should be used on all arms of this statement".
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch arranges multiple-line parameters in accordance with
the parameter above them to improve coding style.
Found by checkpatch.pl
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary blank lines between functions.
Found by checkpatch.pl:
"CHECK: Please don't use multiple blank lines".
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces bit shifting on 1 with the BIT(x) macro
as it's extensively used by other function in this driver.
This was done with coccinelle:
@@ int g; @@
-(1 << g)
+BIT(g)
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simplifies pointer comparison to NULL and makes code
easier to read. Warning found by checkpatch.pl.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary space after type casts.
Warning found by checkpatch.pl.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the conditional return of the ade77*_probe functions
based on the return values of iio_device_register as the latter
returns 0 or ret, the same as the checked values.
Warning found by coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:
@rule1@
identifier x, y, z;
expression E1, E2;
@@
(
x = (y == z);
|
x = (E1 == E2);
|
x =
-(
...
-)
;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warning:
WARNING: braces {} are not necessary for single
statement blocks
Signed-off-by: Taiane Coelho Ramos <exhora.tat@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch uses kcalloc instead of kzalloc function.
A coccinelle script was used to make this change.
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch uses kcalloc instead of kzalloc function.
A coccinelle script was used to make this change.
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without this change file name for hmc5843 is empty in
/sys/bus/iio/devices/iio\:device*/name
With this change name is reported correctly:
cat /sys/bus/iio/devices/iio\:device*/name
hmc5843
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch moves iio userspace applications out of staging, to tools/iio/
and adds a Makefile in order to compile them easily. It also adds tools/iio/
to MAINTAINERS file.
Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch removes inline functions from iio_utils.h in order to clean the
code. iio_utils.c contains the implementation of the functions used by
iio_event_monitor.c, lsiio.c or generic_buffer.c and iio_utils.h contains
the declarations of these functions.
Since iio_utils.h is modified, generic_buffer.c and iio_event_monitor.c
must include stdlib.h.
Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
By adding this line and installing the kernel headers with
make headers_install, iio_event_monitor can be compiled without
any hacks.
Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Variable len is used only to store the return value. Hence len is
removed and the return statement modified. Coccinelle was used to
detect such removable variables:
@rule1@
identifier ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable len is used only to store the return value. Hence len is
removed and the return statement modified. Coccinelle was used to
detect such removable variables:
@rule1@
identifier ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable ret is used only to store the error code to be returned.
Hence use of ret is removed and the return statement modified.
Coccinelle was used to prepare the patch:
@rule1@
identifier ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable ret is used only to store the return value. Hence ret is
removed and the return statement modified. Coccinelle was used to
detect such removable variables:
@rule1@
identifier ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable ret is used only to store the return value. Hence ret is
removed and the return statement modified. Coccinelle was used to
detect such removable variables:
@rule1@
identifier ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the adis16220_read16bit() function we earlier used a s16 value 'val'
which is used by the adis_read_reg_16 function to read data and takes a
u16 value as a parameter.
So, this patch changes the data type of 'val' from s16 to u16. It is safe
to remove the extra sign extension, since the user of the function uses it
to read a 10 unsigned value which will lead to the same result in both cases.
Further this patch removes the unnecessary typecast for the simplification of
code. In addition to this, initialization of 'val' to 0 is also dropped. This is
due to the fact that not initializing helps the compiler provide useful warnings
if the code gets changed to return an otherwise uninitialized result.
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman