Commit Graph

114 Commits

Author SHA1 Message Date
Peter Ujfalusi 98c5fb1f87 ASoC: twl6040: Add digital mute support
To reduce pop noise during playback stream start and stop the codec needs
to have the digital_mute callback implemented.
The codec need to be muted before the CPU dai has been stopped (McPDM).
Stopping the McPDM will generate a pop on the codec since no signal on the
PDM bus means full negative amplitude.
By managing the mute/unmute state of the outputs we can decrease the amount
of pop noise when playback starts or stops.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-24 16:06:03 +01:00
Peter Ujfalusi 68897497aa ASoC: twl6040: Assign id for each DAI
Later we can identify the DAIs by this ID number.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-24 16:06:02 +01:00
Peter Ujfalusi f60596d61f ASoC: twl6040: Drop using devm_request_threaded_irq()
We need to free the irq at twl6040_remove() which is called when the machine
driver has been removed (the card has been removed).
If we fail to do that, next time when the machine driver is loaded the
codec's probe will fail since the irq has been already requested.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-24 16:05:47 +01:00
Peter Ujfalusi 85becda62c ASoC: twl6040: Remove leftover code from hs/hf ramp implementation
The code to do the ramp has been removed a long time ago. Remove the
remaining code as well since this is not needed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11 23:55:12 +00:00
Peter Ujfalusi da2107d1e4 ASoC: twl6040: Switch to use system workqueue for jack reporting
There's no need to create a queue for this anymore

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11 23:54:57 +00:00
Peter Ujfalusi 9523fcdcc0 ASoC: twl6040: Convert to use devm_* when possible
In this way we can clean up the probe and remove paths

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11 23:54:57 +00:00
Peter Ujfalusi 156db9f3bb ASoC: twl6040: Only set the bias_level once in twl6040_resume()
No need to set the bias_level twice to _STANDBY - since this is the only
state the device could be at suspend time. The driver do not support
idle_bias_off yet.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11 23:54:57 +00:00
Misael Lopez Cruz 8d61f4901f ASoC: twl6040: Convert PLUGINT to no-suspend irq
Convert headset PLUGINT interrupt to NO_SUSPEND type in order to
allow handling of insertion/removal events while device is suspended.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-11 23:54:47 +00:00
Bill Pemberton 7a79e94e97 ASoC: codecs: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10 00:31:51 +09:00
Peter Ujfalusi 07ac2296fb ASoC: twl6040: Fix Stream DAPM mapping
Fixes commit: 805238b ASoC: twl6040: Convert to use DAI DAPM widgets
where the connection between the stream widgets and the ADC widgets was
reversed and because of this on capture the DAPM is not powering up the
codec.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-04 18:42:40 +01:00
Peter Ujfalusi 805238b1b7 ASoC: twl6040: Convert to use DAI DAPM widgets
Use DAPM mapping for stream events and give unique names for the streams.
This change also fixes the following warning:
twl6040-codec twl6040-codec: Failed to create Capture debugfs file

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22 10:57:41 -04:00
Linus Torvalds 3e701cdfe6 MFD bits for the 3.6 merge window.
We have support for a few new drivers:
 - Samsung s2mps11
 - Wolfson Microelectronics wm5102 and wm5110
 - Marvell 88PM800 and 88PM805
 - TI twl6041
 
 We also have our regular driver improvements:
 - Device tree and IRQ domain support for STE AB8500
 - Regmap and devm_* API conversion for TI tps6586x
 - Device tree support for Samsung max77686
 - devm_* API conversion for STE AB3100
 
 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
 tps65090, da9052 and twl-core.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQFpGVAAoJEIqAPN1PVmxKFNoP/1dkYngrxxV6cxdyLJ74APhG
 lVKPgaDxQhdgfwCZJmMeZK1UphZo80cWnEXG6sTHZUEQdTaslSJu5SuPfUM+fo7e
 52/dU0nx0ZE04pwPQLHbidS4TmHlbLg9oM2kmIf9RO5rg34GodwVgRL/4+k1qvhz
 aWYJt9erFhQOpqaSX66mXHSuhvzHypbcE7d2B2Ykmh3NoYiH2w9H9KmIbbb+ZLq8
 +Bp/i5Ys/vfooo+8IE2w6KZfIzMwsmmtWjjr/38yuQJaKZCh/zn23DM9HsdrVf++
 RzfniRF4YBxmeKi7zi8MFIYys8filTCXA9dXbGSAKCuUCT37yZRnUxTeN1bn7Bux
 A7KRpG7pUKQKVKqCTndvK5LcQKlT33XyW2ZzV1wVWX2JkCJ+gilPeykb8IabNvGX
 nIp0STEGR/WdCLEAKo8pJF7Usn0RuUzAug02SG/mQ6dpnLoZqp0Od5W7gRhT7M7h
 hXr/xKJ6cG5YwicpAdy5kJJ0dRgQrtaHwxrF0B68AXZ7CmAtkPuEGCYhUCFnGQUH
 XJ0CodAqqVBRyYiQS4zIpIh2nqhIdsgv4OC1+kVLbubQk+PR88zG9Jvg6i1HQi/A
 OHi7N5Wite3YUrs3sBzDKnEc/Il2YRhVaz2SLVNfZR0PS7hywHN3rK/tVFINTgei
 jNEz1H6hu7ToNLfs0UzP
 =c28c
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD bits from Samuel Ortiz:
 "We have support for a few new drivers:
   - Samsung s2mps11
   - Wolfson Microelectronics wm5102 and wm5110
   - Marvell 88PM800 and 88PM805
   - TI twl6041

  We also have our regular driver improvements:
   - Device tree and IRQ domain support for STE AB8500
   - Regmap and devm_* API conversion for TI tps6586x
   - Device tree support for Samsung max77686
   - devm_* API conversion for STE AB3100

  Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
  tps65090, da9052 and twl-core."

Fix up mostly trivial conflicts, with the exception of
drivers/usb/host/ehci-omap.c in particular, which had some
re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI:
centralize controller initialization") that clashed with commit
2761a63945 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix
issues").

In particular, commit 2761a63945 moved the usb_add_hcd() to the
*middle* of the reset sequence, which clashes fairly badly with the
reset sequence re-organization (although it could have been done inside
the new omap_ehci_init() function).

I left that part of commit 2761a63945 just undone.

* tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits)
  mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core
  mfd: Arizone core should select MFD_CORE
  mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ
  mfd: Add debug trace on entering and leaving arizone runtime suspend
  mfd: Correct tps65090 cell names
  mfd: Remove gpio support from tps6586x core driver
  ARM: tegra: defconfig: Enable tps6586x gpio
  gpio: tps6586x: Add gpio support through platform driver
  mfd: Cache tps6586x register through regmap
  mfd: Use regmap for tps6586x register access.
  mfd: Use devm managed resources for tps6586x
  input: Add onkey support for 88PM80X PMIC
  mfd: Add support for twl6041
  mfd: Fix twl6040 revision information
  mfd: Matches should be NULL when populate anatop child devices
  input: ab8500-ponkey: Create AB8500 domain IRQ mapping
  mfd: Add missing out of memory check for pcf50633
  Documentation: Describe the AB8500 Device Tree bindings
  mfd: Add tps65910 32-kHz-crystal-input init
  mfd: Drop modifying mc13xxx driver's id_table in probe
  ...
2012-07-30 12:41:17 -07:00
Peter Ujfalusi be4ac00ac4 mfd: Fix twl6040 revision information
twl6040 ES1.1 and ES1.2 have the same revid (0x01).
ES1.3 of twl6040 REVID is 0x02.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-25 00:26:58 +02:00
Simon Wilson 3e4536546b ASoC: twl6040: fix spelling mistake
Fix spelling mistake in "High-Performance" option of twl6040 power mode.

Signed-off-by: Simon Wilson <simonwilson@google.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06 19:06:50 +01:00
Mark Brown dc2af52c0d Linux 3.4-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPrxCRAAoJEHm+PkMAQRiGQAgH/icr6rDF/e7Y7LoNErjVag94
 +PUhYx851xH3ApPlB1fBaU1ZTvQS2Pb34B8G8WrqWJ+yTs4XfE9sCPj2yb+7ySA8
 vb0vPsErVvAcRWv8sP22NF2ERKNFj/PtSNAcAUJHb5djrRmJcZJ3aw03cdY/INAS
 2OqJEoMc2IBa5Z+WePQJ8N+J2YgDSDdCnpBKNuSHDGN0rBm4suiWY8PWXgTzMAhG
 TNgNrKIlN8bnaX4hPJr6ooN+sxInkUl8ZglAPxwwjVtmYvGch4FiowpDC7BQbSGB
 WFSVsIuv3jMI6VaYDo/NQOFDQqqoK4h7DmBIqbL5eXBRTJg9xW+1A8zloGd4Rks=
 =IWBQ
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc7' into for-3.5

Linux 3.4-rc7

Conflicts):
	drivers/base/regmap/regmap.c         (overlap with bug fixes)
	sound/soc/blackfin/bf5xx-ssm2602.c   (overlap with bug fixes)
2012-05-13 13:32:54 +01:00
Peter Ujfalusi 3bb8a819c6 ASoC: twl6040: Remove HS/HF gain ramp feature
None of the machines uses the gain ramp possibility for HS/HF.
This code path is mostly unused and it does not reduces the pop
noise on the output (it alters it to sound a bit different).
The preferred method to reduce pop noise is to use ABE.
Remove the gain ramp, and related features form the driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-07 18:27:36 +01:00
Peter Ujfalusi 8eaeb93933 mfd: Convert twl6040 to i2c driver, and separate it from twl core
Complete the separation of the twl6040 from the twl core since
it is a separate chip, not part of the twl6030 PMIC.

Make the needed Kconfig changes for the depending drivers at the
same time to avoid breaking the kernel build (vibra, ASoC components).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16 16:45:34 +02:00
Mark Brown e6968a1719 ASoC: codecs: Remove rtd->codec usage from CODEC drivers
In order to support CODEC<->CODEC links remove the assumption that there
is only a single CODEC on a DAI link by removing the use of the CODEC
pointer in the rtd from the CODEC drivers. They are already being passed
their DAI whenever they are passed an rtd and can get the CODEC from
there.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04 15:59:12 +01:00
Takashi Iwai 650d6e25cd This has been a very active release for ASoC, as well as the usual raft
of bugfixes and driver updates there's quite a few framework enhancements.
 Most are either small or are laying the groundwork for user visible
 features (especially dynamic PCM), the most directly visible change is
 the dmaengine library.  There's also a bunch of regmap API enhancements
 pulled into the tree so that either the framework or drivers can take
 advantage of the new features.
 
 Changes include:
 
 - Support for widgets not associated with a CODEC, an important part of
   the dynamic PCM framework.
 
 - A library factoring out the common code shared by dmaengine based DMA
   drivers contributed by Lars-Peter Clausen.  This will save a lot of
   code and make it much easier to deploy enhancements to dmaengine.
 
 - Support for binary controls, used for providing runtime configuration
   of algorithm coefficients.
 
 - A new DAPM widget type for regulator supplies allowing drivers for
   devices that can power down unused supplies while active to do without
   any per-driver code.
 
 - DAPM widgets for DAIs, initially giving a speed boost for playback
   startup and shutdown and also the basis for CODEC<->CODEC DAI link
   support.
 
 - Support for specifying the number of significant bits on audio
   interfaces, useful for allowing applications to know how much effort to
   put into generating data for a larger sample format.
 
 - Conversion of the FSI driver used on some SH processors to DMAEngine.
 
 - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics WM2200.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPU4IOAAoJEBus8iNuMP3de34P/2aEhzOwxZE3DviqSR6qIag0
 exdEqMVUzoRoAJ5NHVFd4qClqUv7k6TxiDKdcIVXXjVm4L2imF5iqkB5VPK4dJSy
 YMYOIBtruHzTsUmjnJzbTc4GSk3lJ/GfYDPvrNslFBywkNy+uAoNRGQQN1wywgA0
 OJhbCoGfgtT+ULKLg9ke5ckHtdgkSFQNpGjb7IuGy+9JDH72CUiSbZzffxRGFR4X
 Ah2/5VuDqXj56ENfp011K7uMRTv2i57+388JAW7kGR/D5TBs3mTD5AkyJUvGYxVY
 bzfUyNoOek7X22mCSZEuP3W/rtyyuAaaA67yBbC1jTKpbACEriSVBauIApHPvUB5
 a9mz03V2knEcrCVgoyt0yMnvWh2UcWtH3BlaGZhlUrmrMvAEYKCW7xYRMScBvlDA
 NPUPBuf6MCMaKbpu+PnuyhTr4TVjkZqHSmotOMgiP5IUzzdlHzAgUSbnU/DQiNV0
 jS6u9+rkc8j9wRVkBXuzaj1uJ6iSI1T3ElS3WrpsMV33/HBqJLHY9LyWyxhBF3Su
 S4dGeo+I6zljrkZeAU4aNHWXRciv37TMNGNVYVs0xZajtLllgpp3IHrOCPzJtoXF
 tJwmXiZUdAo+3QQci0aH4p2Mem2RH2lLOrxKkKD65CqvNC6mCWC3Dc13B+kiZ/Qn
 9GVK/O9CRuwMcBdVsUy9
 =FpJH
 -----END PGP SIGNATURE-----

Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc

This has been a very active release for ASoC, as well as the usual raft
of bugfixes and driver updates there's quite a few framework enhancements.
Most are either small or are laying the groundwork for user visible
features (especially dynamic PCM), the most directly visible change is
the dmaengine library.  There's also a bunch of regmap API enhancements
pulled into the tree so that either the framework or drivers can take
advantage of the new features.

Changes include:

- Support for widgets not associated with a CODEC, an important part of
  the dynamic PCM framework.

- A library factoring out the common code shared by dmaengine based DMA
  drivers contributed by Lars-Peter Clausen.  This will save a lot of
  code and make it much easier to deploy enhancements to dmaengine.

- Support for binary controls, used for providing runtime configuration
  of algorithm coefficients.

- A new DAPM widget type for regulator supplies allowing drivers for
  devices that can power down unused supplies while active to do without
  any per-driver code.

- DAPM widgets for DAIs, initially giving a speed boost for playback
  startup and shutdown and also the basis for CODEC<->CODEC DAI link
  support.

- Support for specifying the number of significant bits on audio
  interfaces, useful for allowing applications to know how much effort to
  put into generating data for a larger sample format.

- Conversion of the FSI driver used on some SH processors to DMAEngine.

- New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics WM2200.
2012-03-05 15:07:33 +01:00
Mark Brown a5d3a21a9a ASoC: twl6040: Move ignore_pmdown_time to driver struct
It's set unconditionally.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2012-02-09 10:43:10 +00:00
Peter Ujfalusi 778cee7afd ASoC: twl6040: Convert MICBIAS to SUPPLY widget
In order to avoid breakage change the omap-abe-twl6040
machine driver's routing.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-26 15:40:43 +02:00
Liam Girdwood 08656910bb ASoC: twl6040 - add method to query HS DC offset step size in mV
Provide a method for mach drivers to query the HS DC offset step size in mV.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20 13:58:26 +00:00
Liam Girdwood e48b46ba16 ASoC: twl6040 - Add method to query optimum PDM_DL1 gain
The DL1 PDM interface adds a little gain depending on the output device.
Add a method to retrieve the gain value for machine driver usage.

Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-01-11 12:43:24 +00:00
Lars-Peter Clausen 84b315ee89 ASoC: Drop unused state parameter from CODEC suspend callback
The existence of this parameter is purely historical. None of the CODEC drivers
uses it and we always pass in the same value anyway, so it should be safe to
remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02 10:32:03 +00:00
Mark Brown 5bbcc3c0d0 ASoC: Convert CODEC drivers to module_platform_driver
Factors out a bit of boilerplate.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28 11:33:29 +00:00
Lars-Peter Clausen 85e7652d89 ASoC: Constify snd_soc_dai_ops structs
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure")
introduced the possibility to have constant DAI ops structures, yet this is
barley used in both existing drivers and also new drivers being submitted,
although none of them modifies its DAI ops structure. The later is not
surprising since existing drivers are often used as templates for new drivers.
So this patch just constifies all existing snd_soc_dai_ops structs to eliminate
the issue altogether.

The patch was generated with the following coccinelle semantic patch:
// <smpl>
@@
identifier ops;
@@
-struct snd_soc_dai_ops ops =
+const struct snd_soc_dai_ops ops =
{ ... };
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23 10:40:46 +00:00
Peter Ujfalusi 35dec69757 ASoC: twl6040: Request core to inline the DAPM sequence
We need to have as less time between McPDM shutdown,
and power down of the DAC on the twl6040 codec as possible.
Request core to ignore the pmdown_time for the playback
stream.
Backround: with the McPDM protocol we are sendning not only
the pure audio stream, but OMAP McPDM also transmits
additional information (for example offset cancellation).
If McPDM is stopped prior to the DAC this information will
be not sent to the codec, which can result noise rendered
by the twl6040 codec.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-14 20:42:21 +01:00
Peter Ujfalusi 694b00010b ASoC: twl6040: Rename the Earphone Driver event handler
Since the event handler is only used by the Earphone Driver, it is better
to rename it from twl6040_power_mode_event to twl6040_ep_drv_event.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-13 17:19:40 +01:00
Peter Ujfalusi aa1a41082f ASoC: twl6040: Change event ordering for Earphone driver
It is better to switch HS Power Mode (if it was in low power mode) before
we enable the Earpiece driver. The switched off EP driver can filter out
noise coming from the Low Power to High Performance transition on the
HSL DAC.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-13 17:19:40 +01:00
Peter Ujfalusi fac2f3e4dc ASoC: twl6040: Remove PLL usage restrictions
There is no limitation dictated by outputs or inputs regarding to the
selected PLL (LP/HP).
Remove the checks for this, and allow all path with any PLL configuration.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-13 17:19:39 +01:00
Peter Ujfalusi f872826e94 ASoC: twl6040: Remove Capture restriction for 17.64MHz sysclk
Capture is supported in all PLL configuration.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-13 17:19:39 +01:00
Peter Ujfalusi 33b6816ca3 ASoC: twl6040: Workaround for headset DC offset caused pop noise
Both Headset DAC need to be turned on/off at the same time before
any of the output drivers are enabled (HS Left/Right, Earpiece).
Move the HS DAC enable code to sequenced DAPM_SUPPLY, and attach
it to the DACs.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12 13:11:54 +01:00
Peter Ujfalusi 67c341302f ASoC: twl6040: Support for vibra output paths
twl6040 have two vibra output drivers.
They can be operated with audio stream coming through
the PDM interface (fifth channel).
The vibra outputs can be controlled via the input/FF
driver as well.
Selection between the two mode is implemented within
the codec driver, the input/FF driver can only operate if
the routing is set to "Input FF".
Changing from "Input FF" to "Audio PDM" mode is protected
as well: The switchin can only be done, if there is no
running effect from the input/FF.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12 11:48:52 +01:00
Peter Ujfalusi a175fce01b ASoC: twl6040: Convert to table based init
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11 14:32:22 +01:00
Peter Ujfalusi a0acf47f1b ASoC: twl6040: Warn user in twl6040_put_volsw for error case
Let the user know, that the callback has been called with unexpected
register parameter.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 17:10:10 +01:00
Peter Ujfalusi db382da5ff ASoC: twl6040: Simply call snd_soc_put_volsw form the custom code
The ASoC core now have one callback function, which can handle
single, and double register mixer controls.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 17:10:10 +01:00
Peter Ujfalusi 08a1ed76f5 ASoC: twl6040: Prepare for core put_volsw/volsw_2r merger
Avoid using the mc->rreg to identify the 2r type of gain control.
Introduce a variable to track this.
This change is needed to avoid breakage with the upcoming volsw volsw_2r
merger.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 17:10:09 +01:00
Peter Ujfalusi e49b68339e ASoC: twl6040: Simplify custom get_volsw callback
The custom get_volsw does not need to call any core get_volsw calls,
since we are returning the shadow values for the gains.
Return -EINVAL in the unlikely event, if the function has been called
for unhandled control. This way we can remove one check in the code.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 17:10:09 +01:00
Peter Ujfalusi 0f9887d11e ASoC: Consolidate use of controls with custom get/put function
Use the macros for controls require custom get/put function.
This is to make sure that the soc_mixer_control is used
consistently among the drivers.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Arun KS <arunks@mistralsolutions.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 17:10:08 +01:00
Peter Ujfalusi bfd3d4e9fb ASoC: twl6040: Simplify custom put_volsw callback
Return -EINVAL in the unlikely event, if the function has been called
for unhandled control. This way we can remove one check in the code.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04 16:28:29 +01:00
Peter Ujfalusi 009d196b47 ASoC: twl6040: Simplify code in out_drv_event for pending work check
Instead of checking, if the work is pending, it is safer to cancel
the pending work, or wait till the scheduled work finishes.
This way we can avoid modifying the variables used by the work
function.
Since we know that no work is pending, we can remove the two additional
checks in POST_PMU, and PRE_PMD for non pending works.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30 13:55:08 +01:00
Peter Ujfalusi 6fbb32d175 ASoC: twl6040: Shift 2 identifies the HS output in out_drv_event
None of the driver handled by out_drv_event have it's power
bit shifted by 3.
Remove the case for shift 3, and also add comment for the cases.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30 13:55:08 +01:00
Peter Ujfalusi 93eebc6982 ASoC: twl6040: correct loop counters for HS/HF ramp code
The Headset gain range is 0 - 0xf (4 bit resolution)
The Handsfree gain range is 0 - 0x1d (5 bit resolution,
0x1e, and 0x1f values are invalid)

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30 13:55:08 +01:00
Peter Ujfalusi a46737aee5 ASoC: twl6040: One workqueue should be enough
It is a bit overkill to have three (3) separate
workqueue for a single driver.
We can manage things with one workqueue nicely.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-30 13:55:08 +01:00
Peter Ujfalusi 4d64bdca44 ASoC: twl6040: No need to change delay during HF ramp
The Handsfree gain have 2dB steps all the way, so there is no
reason to have different delays as we approaching to the
end of the scale.
The comment was also wrong, since we have 0dB at 0x3 raw, at 16 the gain
is -26dB.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-26 22:33:31 +01:00
Peter Ujfalusi 8ff1e17098 ASoC: twl6040: No need to change delay during HS ramp
The Headset gain have 2dB steps all the way, so there is no
reason to have different delays as we approaching to the
end of the scale.
The comment was also wrong, since we have 0dB at 0x0 raw at
one end of the range, and not in the middle.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-26 22:33:31 +01:00
Peter Ujfalusi 46dd0b93a0 ASoC: twl6040: Move the delayed_work for HS detection under twl6040_jack_data
The delayed_work named 'delayed_work' is for the headset detection,
so move it to the twl6040_jack_data struct.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-26 22:24:18 +01:00
Peter Ujfalusi e71a5e5af6 ASoC: twl6040: Move delayed_work struct inside twl6040_output for HS/HF
The delayed works for the output can be moved within the
twl6040_output struct (from the twl6040_data) to be better
organized.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-26 22:23:33 +01:00
Peter Ujfalusi a8cc7189cd ASoC: twl6040: Combine the custom volsw get, and put functions
We can manage with one set of get, and put function for the gain
controls we need to handle with custom code due to the shadowing
of the register.
For both get, and put function we can call decide based on the
mc->rreg value, if we need to call the volsw, or the vlosw_2r
variant (in 2r case rreg is not 0).
Handling of the shadow values are the same for both type of
controls.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-26 22:23:32 +01:00
Peter Ujfalusi eb6b71e7d9 ASoC: twl6040: Rename pga_event to out_drv_event
This event handler is used with the OUT_DRV widgets.
The name pga_event was misleading.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-26 22:23:32 +01:00