Commit Graph

264 Commits

Author SHA1 Message Date
Mark Nelson b6966b1be5 powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_buf
The buffer passed to the ibm,get-system-parameter RTAS call must be
in the RMA.  To ensure we pass an address in the RMA use rtas_data_buf
for the actual RTAS call and then copy the result to value.  We can't
just make it static because this can be compiled in as a module.

Also add the WDRTAS_SP_SPI_LEN so we don't litter '4' throughout the
function.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Tested-by: Adrian Reber <adrian@lisas.de>
Acked-by: Utz Bacher <utz.bacher@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:07:43 +10:00
Linus Torvalds 3c6fae67d0 Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (fschmd) Add support for the FSC Hades IC
  hwmon: (fschmd) Add support for the FSC Syleus IC
  i2c-i801: Instantiate FSC hardware montioring chips
  dmi: Let dmi_walk() users pass private data
  hwmon: Define a standard interface for chassis intrusion detection
  Move the pcf8591 driver to hwmon
  hwmon: (w83627ehf) Only expose in6 or temp3 on the W83667HG
  hwmon: (w83627ehf) Add support for W83667HG
  hwmon: (w83627ehf) Invert fan pin variables logic
  hwmon: (hdaps) Fix Thinkpad X41 axis inversion
  hwmon: (hdaps) Allow inversion of separate axis
  hwmon: (ds1621) Clean up documentation
  hwmon: (ds1621) Avoid unneeded register access
  hwmon: (ds1621) Clean up register access
  hwmon: (ds1621) Reorder code statements
2009-03-30 17:54:32 -07:00
Jean Delvare e7a19c5624 dmi: Let dmi_walk() users pass private data
At the moment, dmi_walk() lacks flexibility, users can't pass data to
the callback function. Add a pointer for private data to make this
function more flexible.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Roland Dreier <rolandd@cisco.com>
2009-03-30 21:46:44 +02:00
Benjamin Herrenschmidt 9ff9a26b78 Merge commit 'origin/master' into next
Manual merge of:
	arch/powerpc/include/asm/elf.h
	drivers/i2c/busses/i2c-mpc.c
2009-03-30 14:04:53 +11:00
Linus Torvalds 0fe41b8982 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...
2009-03-28 14:03:14 -07:00
Russell King ed40d0c472 Merge branch 'origin' into devel
Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c
2009-03-28 20:29:51 +00:00
Ingo Molnar 6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Linus Torvalds 8690d8a9f6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] i6300esb.c: start locking
  [WATCHDOG] i6300esb.c: convert to platform device driver
  [WATCHDOG] wdt.c: remove #ifdef CONFIG_WDT_501
  [WATCHDOG] Fix io.h & uaccess.h includes.
  [WATCHDOG] More coding-style and trivial clean-up
  [WATCHDOG] struct file_operations should be const
  [WATCHDOG] cpwd.c: Coding style - Clean-up
  [WATCHDOG] hpwdt.c: Add new HP BMC controller. 
  [PATCH 13/13] drivers/watchdog: use USB API functions rather than constants
  [WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as platform data
  [WATCHDOG] rc32434_wdt: make sure watchdog is not running at startup
  [WATCHDOG] rc32434_wdt: add spin_locking
  [WATCHDOG] rc32434_wdt: add shutdown method
  [WATCHDOG] rc32434_wdt: add timeout module parameter
  [WATCHDOG] rc32434_wdt: clean-up driver
  [WATCHDOG] davinci: convert to ioremap() + io[read|write]
  [WATCHDOG] w83697ug: add error checking
  [WATCHDOG] cpwd.c & riowd.c - unlocked_ioctl
2009-03-26 15:48:11 -07:00
Wim Van Sebroeck 3b9d49eea1 [WATCHDOG] i6300esb.c: start locking
Change the start function in preparation of the generic watchdog code.
Also make sure that locking of the start function is OK.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:11:02 +00:00
Wim Van Sebroeck 0426fd0d88 [WATCHDOG] i6300esb.c: convert to platform device driver
Convert the Intel 6300ESB watchdog timer to a platform device driver.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:10:45 +00:00
Alan Cox 04bedfa542 [WATCHDOG] wdt.c: remove #ifdef CONFIG_WDT_501
Change the wdt.c watchdog driver so that the code is the same for
both the WDT500 as the WDT501-P card. The selection of the card
is now being done via the module parameter: 'type' instead of the
config option CONFIG_WDT_501.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:08:16 +00:00
Wim Van Sebroeck 278aefc51b [WATCHDOG] Fix io.h & uaccess.h includes.
Fix following includes:
* #include <asm/io.h> should be #include <linux/io.h>
* #include <asm/uaccess.h> should be #include <linux/uaccess.h>

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:07:34 +00:00
Wim Van Sebroeck 143a2e54bf [WATCHDOG] More coding-style and trivial clean-up
Some more cleaning-up of the watchdog drivers.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:07:04 +00:00
Wim Van Sebroeck d5c26a5977 [WATCHDOG] struct file_operations should be const
Fix following warnings:
WARNING: struct file_operations should normally be const

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:06:18 +00:00
Wim Van Sebroeck 927d696113 [WATCHDOG] cpwd.c: Coding style - Clean-up
This brings the cpwd.c watchdog driver in line with the kernel's coding style.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:05:27 +00:00
Thomas Mingarelli d8100c3abf [WATCHDOG] hpwdt.c: Add new HP BMC controller.
Add the PCI-ID for the upcoming new BMC controller for HP hardware.

Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:04:27 +00:00
Julia Lawall 2855d28a35 [PATCH 13/13] drivers/watchdog: use USB API functions rather than constants
This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:03:50 +00:00
Thomas Reitmayr 9e058d4f57 [WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as platform data
The orion5x-wdt driver is now registered as a platform device and
receives the tclk value as platform data. This fixes a compile issue
cause by a previously removed define "ORION5X_TCLK".

Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Kristof Provost <kristof@sigsegv.be>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Sylver Bruneau <sylver.bruneau@googlemail.com>
Cc: Kunihiko IMAI <bak@d2.dion.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-03-25 09:02:50 +00:00
Wim Van Sebroeck f296b14355 [WATCHDOG] rc32434_wdt: make sure watchdog is not running at startup
Make sure that the watchdog is not running after loading
and before it is started by opening /dev/watchdog.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:02:17 +00:00
Wim Van Sebroeck e455b6b4ed [WATCHDOG] rc32434_wdt: add spin_locking
Add spin_locks to prevent races.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:01:50 +00:00
Wim Van Sebroeck 0aaae66179 [WATCHDOG] rc32434_wdt: add shutdown method
Add shutdown method to the platform driver.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:01:03 +00:00
Phil Sutter 08eb2e0c08 [WATCHDOG] rc32434_wdt: add timeout module parameter
The WDT timer ticks quite fast (half of the CPU clock speed, which may
be between 198MHz and 330MHz (or 400MHz on newer boards)). Given it's
size of 32Bit, the maximum timeout value ranges from about 21s to 43s,
depending on the configured CPU clock speed.

This patch add's the timeout module parameter and checks that it's not
bigger then the maximum timeout for the given clock speed.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 09:00:05 +00:00
Phil Sutter 9b655e07d7 [WATCHDOG] rc32434_wdt: clean-up driver
Clean-up the rc32434 driver code:
	- name the platform driver rc32434_wdt_driver
	- Replace KBUILD_MODNAME ": " with PFX define.
	- Cleanup include files
	- Order the ioctl's

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 08:59:12 +00:00
Kevin Hilman 371d3525e3 [WATCHDOG] davinci: convert to ioremap() + io[read|write]
Remove davinci platform-specific IO accessor macros in favor
of standard ioremap + io[read|write]* functions.

Also, convert printk(KERN_ERR ....) into dev_err(...)

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 08:57:43 +00:00
Eric Lammerts 63bad1452e [WATCHDOG] w83697ug: add error checking
I noticed the W83697UG driver tries to register a watchdog even though
it already noticed the chip isn't there.

WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising.
w83697ug/uf WDT: No W83697UG/UF could be found
w83697ug/uf WDT: Watchdog already running. Resetting timeout to 60 sec
w83697ug/uf WDT: cannot register miscdev on minor=130 (err=-16)

Patch propagates the error back to wdt_init().

Signed-off-by: Eric Lammerts <eric@lammerts.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 08:57:15 +00:00
Wim Van Sebroeck 9626dd75c5 [WATCHDOG] cpwd.c & riowd.c - unlocked_ioctl
Switch to unlocked_ioctl

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-03-25 08:54:57 +00:00
Ming Lei 7a192ec334 platform driver: fix incorrect use of 'platform_bus_type' with 'struct device_driver'
This patch fixes the bug reported in
	http://bugzilla.kernel.org/show_bug.cgi?id=11681.

"Lots of device drivers register a 'struct device_driver' with
the '.bus' member set to '&platform_bus_type'. This is wrong,
since the platform_bus functions expect the 'struct device_driver'
to be wrapped up in a 'struct platform_driver' which provides
some additional callbacks (like suspend_late, resume_early).
The effect may be that platform_suspend_late() uses bogus data
outside the device_driver struct as a pointer pointer to the
device driver's suspend_late() function or other hard to
reproduce failures."(Lothar Wassmann)

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:25 -07:00
Russell King 14b6848bc0 Merge branch 'omap-clks3' into devel
Conflicts:

	arch/arm/mach-omap2/clock.c
2009-03-19 12:39:58 +00:00
Martyn Welch 740d36ae63 powerpc/86xx: Board support for GE Fanuc's PPC9A
Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the basic board support for GE Fanuc's PPC9A, a 6U single board
computer, based on Freescale's MPC8641D.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 04:01:00 -05:00
Russell King 97fb44eb6b Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel
Conflicts:

	arch/arm/mach-at91/gpio.c
2009-03-13 21:44:51 +00:00
Benjamin Herrenschmidt e14eee56c2 Merge commit 'origin/master' into next 2009-03-11 17:10:07 +11:00
Eric Miao 5bf3df3f00 [ARM] pxa: separate definitions from pxa-regs.h and remove it finally
The remaining registers are separated into:

   - <mach/regs-ost.h>
   - <mach/regs-rtc.h>
   - <mach/regs-intc.h>

and then we can remove pxa-regs.h completely. Instead of #include this
file, let's:

1. include the specific <mach/regs-*.h> with care (if that's absolutely
   necessary)

2. define the registers in the driver, make cleanly defined API to expose
   the register access to external with sufficient reason

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:40 +08:00
Wim Van Sebroeck c9a0c8a684 [WATCHDOG] orion5x_wdt.c: 'ORION5X_TCLK' undeclared
orion5x_wdt no longer compiled after the changes in commit
ebe35aff88 ("Orion: prepare for
runtime-determined timer tick rate").

The tick rate define (ORION5X_TCLK) was removed in favor of a runtime
detection. The quick fix is to add the define in the watchdog driver.
The fix is not correct for all supported orion5x platforms, but since
the supported platforms right now are 133 Mhz and 166 Mhz, it won't
be _that_ far off. ;-) A fix that uses the runtime-determined timer
tick rate will be applied later.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Kristof Provost <kristof@sigsegv.be>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Nicolas Pitre <nico@cam.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
2009-03-05 19:25:05 +00:00
Roel Kluin 26952669f0 [WATCHDOG] gef_wdt.c: fsl_get_sys_freq() failure not noticed
fsl_get_sys_freq() may return -1 when 'soc' isn't found, but in
gef_wdt_probe() 'freq' is unsigned, so the test doesn't catch that.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-03-05 14:02:53 +00:00
Alexey Dobriyan b02c387892 [WATCHDOG] ks8695_wdt.c: 'CLOCK_TICK_RATE' undeclared
On arm-acs5k_tiny:

drivers/watchdog/ks8695_wdt.c:68: error: 'CLOCK_TICK_RATE' undeclared
	(first use in this function)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2009-03-05 13:59:05 +00:00
Phil Sutter d9a8798c4b [WATCHDOG] rc32434_wdt: fix sections
Fix init and exit sections.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2009-02-24 09:00:53 +00:00
Phil Sutter 0af98d37e8 [WATCHDOG] rc32434_wdt: fix watchdog driver
The existing driver code wasn't working. Neither the timeout was set
correctly, nor system reset was being triggered, as the driver seemed
to keep the WDT alive himself. There was also some unnecessary code.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@kernel.org>
2009-02-24 09:00:49 +00:00
Ingo Molnar fc6fc7f1b1 Merge branch 'linus' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic conflict resolution:
	arch/x86/kernel/setup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-22 20:05:19 +01:00
Linus Torvalds 402a917aca Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header
  [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC
  [ARM] omap: fix clock reparenting in omap2_clk_set_parent()
  [ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0
  [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()
  [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support
  [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller
  [ARM] 5391/1: AT91: Enable GPIO clocks earlier
  [ARM] 5390/1: AT91: Watchdog fixes
  [ARM] 5398/1: Add Wan ZongShun to MAINTAINERS for W90P910
  [ARM] omap: fix _omap2_clksel_get_src_field()
  [ARM] omap: fix omap2_divisor_to_clksel() error return value
2009-02-19 09:52:12 -08:00
Benjamin Herrenschmidt 82a0a1cc8f Merge commit 'origin/master' into next
Manual merge of:
	arch/powerpc/include/asm/pgtable-ppc32.h
2009-02-18 13:19:25 +11:00
Andrew Victor 2af29b7861 [ARM] 5390/1: AT91: Watchdog fixes
The recently merged AT91SAM9 watchdog driver uses the
AT91SAM9X_WATCHDOG config variable, whereas the original version of
the driver (and the platform support code) used AT91SAM9_WATCHDOG.
This causes the watchdog platform_device to never be registered, and
therefore the driver not to be initialized.

This patch:
- updates the platform support code to use AT91SAM9X_WATCHDOG.
- includes <linux/io.h> to fix compile error (same fix as was applied
to at91rm9200_wdt.c)
- fixes comment regarding watchdog clock-rates in at91rm9200.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-14 16:01:57 +00:00
Wim Van Sebroeck 12d60e28be [WATCHDOG] iTCO_wdt: fix SMI_EN regression 2
bugzilla: #12363
commit 7cd5b08be3 added a second regression:
some Dell's and Compaq's lockup on boot. So we revert most of the code.
The ICH9 reboot issue remains in place and will need some more fixing... :-(

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-02-14 08:49:23 +00:00
Russell King 4c5e1946b5 [ARM] omap: watchdog: provide a dummy ick for OMAP1
Eliminate the OMAP1 vs OMAP2 clock knowledge in the watchdog driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08 17:50:16 +00:00
Russell King 39a80c7f37 [ARM] omap: watchdog: convert clocks to match by devid and conid
This eliminates the need for separate OMAP24xx and OMAP34xx clock
requesting code sections.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08 17:50:16 +00:00
Martyn Welch bb2b66dca1 powerpc/86xx: Board support for GE Fanuc SBC310
Support for the SBC310 VPX Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the basic board support for GE Fanuc's SBC310, a 3U single board
computer, based on Freescale's MPC8641D.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-28 23:03:20 -06:00
Ingo Molnar 74b6eb6b93 Merge branches 'x86/asm', 'x86/cleanups', 'x86/cpudetect', 'x86/debug', 'x86/doc', 'x86/header-fixes', 'x86/mm', 'x86/paravirt', 'x86/pat', 'x86/setup-v2', 'x86/subarch', 'x86/uaccess' and 'x86/urgent' into x86/core 2009-01-28 23:13:53 +01:00
Russell King b7cfc9ca6a [ARM] omap: watchdog: allow OMAP watchdog driver on OMAP34xx platforms
The driver was updated for OMAP34xx, but the Kconfig file was missed.
So this adds the missing parts from d99241c in Tony Lindgren's tree:

    Add watchdog timer support for TI OMAP3430.

    Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com>
    Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-24 16:48:42 +00:00
Jean-Christop PLAGNIOL-VILLARD 02e0746ecc [ARM] 5370/1: at91: fix rm9200 watchdog
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-24 11:41:19 +00:00
Ingo Molnar 5662a2f8e7 x86, rdc321x: remove/move leftover files
Impact: cleanup

Move/remove leftover RDC321 files. Now that it's not a subarch anymore,
arch/x86/mach-rdc321x and arch/x86/include/asm/mach-rdc321x/ are not
needed.

One include file was still in use: rdc321x_defs.h, move that to the
generic x86 asm header directory.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-18 19:39:18 +01:00
Sean MacLennan 618efba999 [WATCHDOG] Pika Warp appliance watchdog timer
The FPGA based watchdog timer used by the Pika Warp appliance.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-01-12 20:08:56 +00:00