Commit Graph

79 Commits

Author SHA1 Message Date
Tejun Heo b0c9778b1d percpu: implement kernel memory based chunk allocation
Implement an alternate percpu chunk management based on kernel memeory
for nommu SMP architectures.  Instead of mapping into vmalloc area,
chunks are allocated as a contiguous kernel memory using
alloc_pages().  As such, percpu allocator on nommu will have the
following restrictions.

* It can't fill chunks on-demand page-by-page.  It has to allocate
  each chunk fully upfront.

* It can't support sparse chunk for NUMA configurations.  SMP w/o mmu
  is crazy enough.  Let's hope no one does NUMA w/o mmu.  :-P

* If chunk size isn't power-of-two multiple of PAGE_SIZE, the
  unaligned amount will be wasted on each chunk.  So, archs which use
  this better align chunk size.

For instructions on how to use this, read the comment on top of
mm/percpu-km.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Graff Yang <graff.yang@gmail.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
2010-05-01 08:30:50 +02:00
Tejun Heo 9f64553256 percpu: move vmalloc based chunk management into percpu-vm.c
Separate out and move chunk management (creation/desctruction and
[de]population) code into percpu-vm.c which is included by percpu.c
and compiled together.  The interface for chunk management is defined
as follows.

 * pcpu_populate_chunk		- populate the specified range of a chunk
 * pcpu_depopulate_chunk	- depopulate the specified range of a chunk
 * pcpu_create_chunk		- create a new chunk
 * pcpu_destroy_chunk		- destroy a chunk, always preceded by full depop
 * pcpu_addr_to_page		- translate address to physical address
 * pcpu_verify_alloc_info	- check alloc_info is acceptable during init

Other than wrapping vmalloc_to_page() inside pcpu_addr_to_page() and
dummy pcpu_verify_alloc_info() implementation, this patch only moves
code around.  This separation is to allow alternate chunk management
implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Graff Yang <graff.yang@gmail.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
2010-05-01 08:30:50 +02:00
Tejun Heo 88999a898b percpu: misc preparations for nommu support
Make the following misc preparations for percpu nommu support.

* Remove refernces to vmalloc in common comments as nommu percpu won't
  use it.

* Rename chunk->vms to chunk->data and make it void *.  Its use is
  determined by chunk management implementation.

* Relocate utility functions and add __maybe_unused to functions which
  might not be used by different chunk management implementations.

This patch doesn't cause any functional change.  This is to allow
alternate chunk management implementation for percpu nommu support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Graff Yang <graff.yang@gmail.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
2010-05-01 08:30:50 +02:00
Tejun Heo 6081089fd6 percpu: reorganize chunk creation and destruction
Reorganize alloc/free_pcpu_chunk() such that chunk struct alloc/free
live in pcpu_alloc/free_chunk() and the rest in
pcpu_create/destroy_chunk().  While at it, add missing error handling
for chunk->map allocation failure.

This is to allow alternate chunk management implementation for percpu
nommu support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Graff Yang <graff.yang@gmail.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
2010-05-01 08:30:50 +02:00
Tejun Heo 020ec6537a percpu: factor out pcpu_addr_in_first/reserved_chunk() and update per_cpu_ptr_to_phys()
Factor out pcpu_addr_in_first/reserved_chunk() from
pcpu_chunk_addr_search() and use it to update per_cpu_ptr_to_phys()
such that it handles first chunk differently from the rest.

This patch doesn't cause any functional change and is to prepare for
percpu nommu support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Graff Yang <graff.yang@gmail.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
2010-05-01 08:30:49 +02:00
Tejun Heo 10fad5e46f percpu, module: implement and use is_kernel/module_percpu_address()
lockdep has custom code to check whether a pointer belongs to static
percpu area which is somewhat broken.  Implement proper
is_kernel/module_percpu_address() and replace the custom code.

On UP, percpu variables are regular static variables and can't be
distinguished from them.  Always return %false on UP.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
2010-03-29 23:07:12 +09:00
Tejun Heo 43cf38eb5c percpu: add __percpu sparse annotations to core kernel subsystems
Add __percpu sparse annotations to core subsystems.

These annotations are to make sparse consider percpu variables to be
in a different address space and warn if accessed without going
through percpu accessors.  This patch doesn't affect normal builds.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-mm@kvack.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric Biederman <ebiederm@xmission.com>
2010-02-17 11:17:38 +09:00
Tejun Heo ab386128f2 Merge branch 'master' into percpu 2010-02-02 14:38:15 +09:00
Andrew Morton 129182e562 percpu: avoid calling __pcpu_ptr_to_addr(NULL)
__pcpu_ptr_to_addr() can be overridden by the architecture and might not
behave well if passed a NULL pointer.  So avoid calling it until we have
verified that its arg is not NULL.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:04 -08:00
Tejun Heo 32032df6c2 Merge branch 'master' into percpu
Conflicts:
	arch/powerpc/platforms/pseries/hvCall.S
	include/linux/percpu.h
2010-01-05 09:17:33 +09:00
WANG Cong 22b737f4c7 percpu: refactor the code in pcpu_[de]populate_chunk()
Using break statement at the end of a for loop is confusing,
refactor it by replacing the for loop.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-12-08 10:28:54 +09:00
Tejun Heo 50de1a8ef1 Merge branch 'for-linus' into for-next
Conflicts:
	mm/percpu.c
2009-12-08 10:02:12 +09:00
Vivek Goyal 3b034b0d08 percpu: Fix kdump failure if booted with percpu_alloc=page
o kdump functionality reserves a per cpu area at boot time and exports the
  physical address of that area to user space through sys interface. This
  area stores some dump related information like cpu register states etc
  at the time of crash.

o We were assuming that per cpu area always come from linearly mapped meory
  region and using __pa() to determine physical address.
  With percpu_alloc=page, per cpu area can come from vmalloc region also and
  __pa() breaks.

o This patch implments a new function to convert per cpu address to
  physical address.

Before the patch, crash_notes addresses looked as follows.

cpu0 60fffff49800
cpu1 60fffff60800
cpu2 60fffff77800

These are bogus phsyical addresses.

After the patch, address are following.

cpu0 13eb44000
cpu1 13eb43000
cpu2 13eb42000
cpu3 13eb41000

These look fine. I got 4G of memory and /proc/iomem tell me following.

100000000-13fffffff : System RAM

tj: * added missing asm/io.h include reported by Stephen Rothwell
    * repositioned per_cpu_ptr_phys() in percpu.c and added comment.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2009-11-25 21:49:22 +09:00
Tejun Heo 833af8427b percpu: restructure pcpu_extend_area_map() to fix bugs and improve readability
pcpu_extend_area_map() had the following two bugs.

* It should return 1 if pcpu_lock was dropped and reacquired but it
  returned 0.  This could lead to oops if free_percpu() races with
  area map extension.

* pcpu_mem_free() was called under pcpu_lock.  pcpu_mem_free() might
  end up calling vfree() which isn't IRQ safe.  This could lead to
  deadlock through lock order inversion via IRQ.

In addition, Linus pointed out that the temporary lock dropping and
subtle three-way return value of pcpu_extend_area_map() was very ugly
and suggested to split the function into two - pcpu_need_to_extend()
and pcpu_extend_area_map().

This patch restructures pcpu_extend_area_map() as suggested and fixes
the two bugs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-11-13 00:55:35 +09:00
Tejun Heo 0f5e4816db percpu: remove some sparse warnings
Make the following changes to remove some sparse warnings.

* Make DEFINE_PER_CPU_SECTION() declare __pcpu_unique_* before
  defining it.

* Annotate pcpu_extend_area_map() that it is entered with pcpu_lock
  held, releases it and then reacquires it.

* Make percpu related macros use unique nested variable names.

* While at it, add pcpu prefix to __size_call[_return]() macros as
  to-be-implemented sparse annotations will add percpu specific stuff
  to these macros.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
2009-10-29 22:34:12 +09:00
Jiri Kosina 403a91b165 percpu: allow pcpu_alloc() to be called with IRQs off
pcpu_alloc() and pcpu_extend_area_map() perform a series of
spin_lock_irq()/spin_unlock_irq() calls, which make them unsafe
with respect to being called from contexts which have IRQs off.

This patch converts the code to perform save/restore of flags instead,
making pcpu_alloc() (or __alloc_percpu() respectively) to be called
from early kernel startup stage, where IRQs are off.

This is needed for proper initialization of per-cpu rq_weight data from
sched_init().

tj: added comment explaining why irqsave/restore is used in alloc path.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-10-29 00:25:59 +09:00
Tejun Heo b7a4c946d0 Merge branch 'for-linus' into for-next 2009-10-12 17:14:18 +09:00
Tejun Heo 1a0c3298d6 percpu: fix compile warnings
Fix the following two compile warnings which show up on i386.

mm/percpu.c:1873: warning: comparison of distinct pointer types lacks a cast
mm/percpu.c:1879: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'size_t'

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
2009-10-12 17:04:42 +09:00
Tejun Heo 23fb064bb9 percpu: kill legacy percpu allocator
With ia64 converted, there's no arch left which still uses legacy
percpu allocator.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Delightedly-acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
2009-10-02 13:29:29 +09:00
Tejun Heo f2badb0c95 percpu: make allocation failures more verbose
Warn and dump stack when percpu allocation fails.  percpu allocator is
still young and unchecked NULL percpu pointer usage can result in
random memory corruption when combined with the pointer shifting in
access macros.  Allocation failures should be rare and the warning
message will be disabled after certain times.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-09-29 09:17:58 +09:00
Tejun Heo 635b75fc18 percpu: make pcpu_setup_first_chunk() failures more verbose
The parameters to pcpu_setup_first_chunk() come from different sources
depending on architecture and can be quite complex.  The function runs
various sanity checks on the parameters and triggers BUG() if
something isn't right.  However, this is very early during the boot
and not reporting exactly what the problem is makes debugging even
harder.

Add PCPU_SETUP_BUG() macro which prints out enough information about
the parameters.  As the macro still puts separate BUG() for each
check, it won't lose any information even on the situations where only
the program counter can be retrieved.

While at it, also bump pcpu_dump_alloc_info() message to KERN_INFO so
that it's visible on the console if boot fails to complete.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-09-29 09:17:57 +09:00
Tejun Heo 6ea529a203 percpu: make embedding first chunk allocator check vmalloc space size
Embedding first chunk allocator maintains the distances between units
in the vmalloc area and thus needs vmalloc space to be larger than the
maximum distances between units; otherwise, it wouldn't be able to
create any dynamic chunks.  This patch makes the embedding first chunk
allocator check vmalloc space size and if the maximum distance between
units is larger than 75% of it, print warning and, if page mapping
allocator is available, fail initialization so that the system falls
back onto it.

This should work around percpu allocation failure problems on certain
sparc64 configurations where distances between NUMA nodes are larger
than the vmalloc area and makes percpu allocator more robust for
future configurations.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-09-29 09:17:57 +09:00
Tejun Heo fb59e72e7e percpu: make pcpu_build_alloc_info() clear static buffers
pcpu_build_alloc_info() may be called multiple times when percpu is
falling back to different first chunk allocator.  Make it clear static
buffers so that they don't contain values from previous runs.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-09-29 09:17:57 +09:00
Tejun Heo ffe0d5a575 percpu: fix unit_map[] verification in pcpu_setup_first_chunk()
pcpu_setup_first_chunk() incorrectly used NR_CPUS as the impossible
unit number while unit number can equal and go over NR_CPUS with
sparse unit map.  This triggers BUG_ON() spuriously on machines which
have non-power-of-two number of cpus.  Use UINT_MAX instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Tony Vroon <tony@linx.net>
2009-09-29 09:17:56 +09:00
Tejun Heo 5579fd7e6a Merge branch 'for-next' into for-linus
* pcpu_chunk_page_occupied() doesn't exist in for-next.
* pcpu_chunk_addr_search() updated to use raw_smp_processor_id().

Conflicts:
	mm/percpu.c
2009-09-15 09:57:19 +09:00
Tejun Heo 04a13c7c63 percpu: don't assume existence of cpu0
percpu incorrectly assumed that cpu0 was always there which led to the
following warning and eventual oops on sparc machines w/o cpu0.

  WARNING: at mm/percpu.c:651 pcpu_map+0xdc/0x100()
  Modules linked in:
  Call Trace:
    [000000000045eb70] warn_slowpath_common+0x50/0xa0
    [000000000045ebdc] warn_slowpath_null+0x1c/0x40
    [00000000004d493c] pcpu_map+0xdc/0x100
    [00000000004d59a4] pcpu_alloc+0x3e4/0x4e0
    [00000000004d5af8] __alloc_percpu+0x18/0x40
    [00000000005b112c] __percpu_counter_init+0x4c/0xc0
  ...
  Unable to handle kernel NULL pointer dereference
  ...
   I7: <sysfs_new_dirent+0x30/0x120>
   Disabling lock debugging due to kernel taint
   Caller[000000000053c1b0]: sysfs_new_dirent+0x30/0x120
   Caller[000000000053c7a4]: create_dir+0x24/0xc0
   Caller[000000000053c870]: sysfs_create_dir+0x30/0x80
   Caller[00000000005990e8]: kobject_add_internal+0xc8/0x200
  ...
   Kernel panic - not syncing: Attempted to kill the idle task!

This patch fixes the problem by backporting parts from devel branch to
make percpu core not depend on the existence of cpu0.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Meelis Roos <mroos@linux.ee>
Cc: David Miller <davem@davemloft.net>
2009-09-01 21:23:18 +09:00
Tejun Heo e933a73f48 percpu: kill lpage first chunk allocator
With x86 converted to embedding allocator, lpage doesn't have any user
left.  Kill it along with cpa handling code.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
2009-08-14 15:00:53 +09:00
Tejun Heo c8826dd538 percpu: update embedding first chunk allocator to handle sparse units
Now that percpu core can handle very sparse units, given that vmalloc
space is large enough, embedding first chunk allocator can use any
memory to build the first chunk.  This patch teaches
pcpu_embed_first_chunk() about distances between cpus and to use
alloc/free callbacks to allocate node specific areas for each group
and use them for the first chunk.

This brings the benefits of embedding allocator to NUMA configurations
- no extra TLB pressure with the flexibility of unified dynamic
allocator and no need to restructure arch code to build memory layout
suitable for percpu.  With units put into atom_size aligned groups
according to cpu distances, using large page for dynamic chunks is
also easily possible with falling back to reuglar pages if large
allocation fails.

Embedding allocator users are converted to specify NULL
cpu_distance_fn, so this patch doesn't cause any visible behavior
difference.  Following patches will convert them.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:52 +09:00
Tejun Heo 6563297cea percpu: use group information to allocate vmap areas sparsely
ai->groups[] contains which units need to be put consecutively and at
what offset from the chunk base address.  Compile this information
into pcpu_group_offsets[] and pcpu_group_sizes[] in
pcpu_setup_first_chunk() and use them to allocate sparse vm areas
using pcpu_get_vm_areas().

This will be used to allow directly using sparse NUMA memories as
percpu areas.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Nick Piggin <npiggin@suse.de>
2009-08-14 15:00:52 +09:00
Tejun Heo bba174f5e0 percpu: add chunk->base_addr
The only thing percpu allocator wants to know about a vmalloc area is
the base address.  Instead of requiring chunk->vm, add
chunk->base_addr which contains the necessary value.  This simplifies
the code a bit and makes the dummy first_vm unnecessary.  This change
will ease allowing a chunk to be mapped by multiple vms.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:51 +09:00
Tejun Heo fb435d5233 percpu: add pcpu_unit_offsets[]
Currently units are mapped sequentially into address space.  This
patch adds pcpu_unit_offsets[] which allows units to be mapped to
arbitrary offsets from the chunk base address.  This is necessary to
allow sparse embedding which might would need to allocate address
ranges and memory areas which aren't aligned to unit size but
allocation atom size (page or large page size).  This also simplifies
things a bit by removing the need to calculate offset from unit
number.

With this change, there's no need for the arch code to know
pcpu_unit_size.  Update pcpu_setup_first_chunk() and first chunk
allocators to return regular 0 or -errno return code instead of unit
size or -errno.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
2009-08-14 15:00:51 +09:00
Tejun Heo fd1e8a1fe2 percpu: introduce pcpu_alloc_info and pcpu_group_info
Till now, non-linear cpu->unit map was expressed using an integer
array which maps each cpu to a unit and used only by lpage allocator.
Although how many units have been placed in a single contiguos area
(group) is known while building unit_map, the information is lost when
the result is recorded into the unit_map array.  For lpage allocator,
as all allocations are done by lpages and whether two adjacent lpages
are in the same group or not is irrelevant, this didn't cause any
problem.  Non-linear cpu->unit mapping will be used for sparse
embedding and this grouping information is necessary for that.

This patch introduces pcpu_alloc_info which contains all the
information necessary for initializing percpu allocator.
pcpu_alloc_info contains array of pcpu_group_info which describes how
units are grouped and mapped to cpus.  pcpu_group_info also has
base_offset field to specify its offset from the chunk's base address.
pcpu_build_alloc_info() initializes this field as if all groups are
allocated back-to-back as is currently done but this will be used to
sparsely place groups.

pcpu_alloc_info is a rather complex data structure which contains a
flexible array which in turn points to nested cpu_map arrays.

* pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to
  help dealing with pcpu_alloc_info.

* pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info,
  generalized and renamed to pcpu_build_alloc_info().
  @cpu_distance_fn may be NULL indicating that all cpus are of
  LOCAL_DISTANCE.

* pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info,
  generalized and renamed to pcpu_dump_alloc_info().  It now also
  prints which group each alloc unit belongs to.

* pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the
  separate parameters.  All first chunk allocators are updated to use
  pcpu_build_alloc_info() to build alloc_info and call
  pcpu_setup_first_chunk() with it.  This has the side effect of
  packing units for sparse possible cpus.  ie. if cpus 0, 2 and 4 are
  possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4.

* x86 setup_pcpu_lpage() is updated to deal with alloc_info.

* sparc64 setup_per_cpu_areas() is updated to build alloc_info.

Although the changes made by this patch are pretty pervasive, it
doesn't cause any behavior difference other than packing of sparse
cpus.  It mostly changes how information is passed among
initialization functions and makes room for more flexibility.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
2009-08-14 15:00:51 +09:00
Tejun Heo 033e48fb82 percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
Unit map handling will be generalized and extended and used for
embedding sparse first chunk and other purposes.  Relocate two
unit_map related functions upward in preparation.  This patch just
moves the code without any actual change.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:51 +09:00
Tejun Heo 3cbc856527 percpu: add @align to pcpu_fc_alloc_fn_t
pcpu_fc_alloc_fn_t is about to see more interesting usage, add @align
parameter.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:50 +09:00
Tejun Heo 1d9d325721 percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
Now that all actual first chunk allocation and copying happen in the
first chunk allocators and helpers, there's no reason for
pcpu_setup_first_chunk() to try to determine @dyn_size automatically.
The only left user is page first chunk allocator.  Make it determine
dyn_size like other allocators and make @dyn_size mandatory for
pcpu_setup_first_chunk().

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:50 +09:00
Tejun Heo 9a7737691e percpu: drop @static_size from first chunk allocators
First chunk allocators assume percpu areas have been linked using one
of PERCPU_*() macros and depend on __per_cpu_load symbol defined by
those macros, so there isn't much point in passing in static area size
explicitly when it can be easily calculated from __per_cpu_start and
__per_cpu_end.  Drop @static_size from all percpu first chunk
allocators and helpers.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:50 +09:00
Tejun Heo f58dc01ba2 percpu: generalize first chunk allocator selection
Now that all first chunk allocators are in mm/percpu.c, it makes sense
to make generalize percpu_alloc kernel parameter.  Define PCPU_FC_*
and set pcpu_chosen_fc using early_param() in mm/percpu.c.  Arch code
can use the set value to determine which first chunk allocator to use.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:50 +09:00
Tejun Heo 08fc458061 percpu: build first chunk allocators selectively
There's no need to build unused first chunk allocators in.  Define
CONFIG_NEED_PER_CPU_*_FIRST_CHUNK and let archs enable them
selectively.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 15:00:49 +09:00
Tejun Heo 00ae4064b1 percpu: rename 4k first chunk allocator to page
Page size isn't always 4k depending on arch and configuration.  Rename
4k first chunk allocator to page.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Howells <dhowells@redhat.com>
2009-08-14 15:00:49 +09:00
Tejun Heo 004018e2c0 percpu: improve boot messages
Improve percpu boot messages such that they're uniform and contain
more information.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
2009-08-14 15:00:49 +09:00
Tejun Heo 971f3918a5 percpu: fix pcpu_reclaim() locking
pcpu_reclaim() calls pcpu_depopulate_chunk() which makes use of pages
array and bitmap returned by pcpu_get_pages_and_bitmap() and thus
should be called under pcpu_alloc_mutex.  pcpu_reclaim() released the
mutex before calling depopulate leading to double free and other
strange problems caused by the unexpected concurrent usages of pages
array and bitmap.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
2009-08-14 15:00:49 +09:00
Tejun Heo 384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Amerigo Wang 142d44b0dd percpu: use the right flag for get_vm_area()
get_vm_area() only accepts VM_* flags, not GFP_*.

And according to the doc of get_vm_area(), here should be
VM_ALLOC.

Signed-off-by: WANG Cong <amwang@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-08-14 13:21:10 +09:00
Tejun Heo 74d46d6b2d percpu, sparc64: fix sparse possible cpu map handling
percpu code has been assuming num_possible_cpus() == nr_cpu_ids which
is incorrect if cpu_possible_map contains holes.  This causes percpu
code to access beyond allocated memories and vmalloc areas.  On a
sparc64 machine with cpus 0 and 2 (u60), this triggers the following
warning or fails boot.

 WARNING: at /devel/tj/os/work/mm/vmalloc.c:106 vmap_page_range_noflush+0x1f0/0x240()
 Modules linked in:
 Call Trace:
  [00000000004b17d0] vmap_page_range_noflush+0x1f0/0x240
  [00000000004b1840] map_vm_area+0x20/0x60
  [00000000004b1950] __vmalloc_area_node+0xd0/0x160
  [0000000000593434] deflate_init+0x14/0xe0
  [0000000000583b94] __crypto_alloc_tfm+0xd4/0x1e0
  [00000000005844f0] crypto_alloc_base+0x50/0xa0
  [000000000058b898] alg_test_comp+0x18/0x80
  [000000000058dad4] alg_test+0x54/0x180
  [000000000058af00] cryptomgr_test+0x40/0x60
  [0000000000473098] kthread+0x58/0x80
  [000000000042b590] kernel_thread+0x30/0x60
  [0000000000472fd0] kthreadd+0xf0/0x160
 ---[ end trace 429b268a213317ba ]---

This patch fixes generic percpu functions and sparc64
setup_per_cpu_areas() so that they handle sparse cpu_possible_map
properly.

Please note that on x86, cpu_possible_map() doesn't contain holes and
thus num_possible_cpus() == nr_cpu_ids and this patch doesn't cause
any behavior difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
2009-08-14 13:20:53 +09:00
Tejun Heo a530b79586 percpu: teach large page allocator about NUMA
Large page first chunk allocator is primarily used for NUMA machines;
however, its NUMA handling is extremely simplistic.  Regardless of
their proximity, each cpu is put into separate large page just to
return most of the allocated space back wasting large amount of
vmalloc space and increasing cache footprint.

This patch teachs NUMA details to large page allocator.  Given
processor proximity information, pcpu_lpage_build_unit_map() will find
fitting cpu -> unit mapping in which cpus in LOCAL_DISTANCE share the
same large page and not too much virtual address space is wasted.

This greatly reduces the unit and thus chunk size and wastes much less
address space for the first chunk.  For example, on 4/4 NUMA machine,
the original code occupied 16MB of virtual space for the first chunk
while the new code only uses 4MB - one 2MB page for each node.

[ Impact: much better space efficiency on NUMA machines ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Miller <davem@davemloft.net>
2009-07-04 08:11:00 +09:00
Tejun Heo 2f39e637ea percpu: allow non-linear / sparse cpu -> unit mapping
Currently cpu and unit are always identity mapped.  To allow more
efficient large page support on NUMA and lazy allocation for possible
but offline cpus, cpu -> unit mapping needs to be non-linear and/or
sparse.  This can be easily implemented by adding a cpu -> unit
mapping array and using it whenever looking up the matching unit for a
cpu.

The only unusal conversion is in pcpu_chunk_addr_search().  The passed
in address is unit0 based and unit0 might not be in use so it needs to
be converted to address of an in-use unit.  This is easily done by
adding the unit offset for the current processor.

[ Impact: allows non-linear/sparse cpu -> unit mapping, no visible change yet ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
2009-07-04 08:11:00 +09:00
Tejun Heo ce3141a277 percpu: drop pcpu_chunk->page[]
percpu core doesn't need to tack all the allocated pages.  It needs to
know whether certain pages are populated and a way to reverse map
address to page when freeing.  This patch drops pcpu_chunk->page[] and
use populated bitmap and vmalloc_to_page() lookup instead.  Using
vmalloc_to_page() exclusively is also possible but complicates first
chunk handling, inflates cache footprint and prevents non-standard
memory allocation for percpu memory.

pcpu_chunk->page[] was used to track each page's allocation and
allowed asymmetric population which happens during failure path;
however, with single bitmap for all units, this is no longer possible.
Bite the bullet and rewrite (de)populate functions so that things are
done in clearly separated steps such that asymmetric population
doesn't happen.  This makes the (de)population process much more
modular and will also ease implementing non-standard memory usage in
the future (e.g. large pages).

This makes @get_page_fn parameter to pcpu_setup_first_chunk()
unnecessary.  The parameter is dropped and all first chunk helpers are
updated accordingly.  Please note that despite the volume most changes
to first chunk helpers are symbol renames for variables which don't
need to be referenced outside of the helper anymore.

This change reduces memory usage and cache footprint of pcpu_chunk.
Now only #unit_pages bits are necessary per chunk.

[ Impact: reduced memory usage and cache footprint for bookkeeping ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
2009-07-04 08:11:00 +09:00
Tejun Heo c8a51be4ca percpu: reorder a few functions in mm/percpu.c
(de)populate functions are about to be reimplemented to drop
pcpu_chunk->page array.  Move a few functions so that the rewrite
patch doesn't have code movement making it more difficult to read.

[ Impact: code movement ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-07-04 08:10:59 +09:00
Tejun Heo 38a6be5254 percpu: simplify pcpu_setup_first_chunk()
Now that all first chunk allocator helpers allocate and map the first
chunk themselves, there's no need to have optional default alloc/map
in pcpu_setup_first_chunk().  Drop @populate_pte_fn and only leave
@dyn_size optional and make all other params mandatory.

This makes it much easier to follow what pcpu_setup_first_chunk() is
doing and what actual differences tweaking each parameter results in.

[ Impact: drop unused code path ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-07-04 08:10:59 +09:00
Tejun Heo 8c4bfc6e88 x86,percpu: generalize lpage first chunk allocator
Generalize and move x86 setup_pcpu_lpage() into
pcpu_lpage_first_chunk().  setup_pcpu_lpage() now is a simple wrapper
around the generalized version.  Other than taking size parameters and
using arch supplied callbacks to allocate/free/map memory,
pcpu_lpage_first_chunk() is identical to the original implementation.

This simplifies arch code and will help converting more archs to
dynamic percpu allocator.

While at it, factor out pcpu_calc_fc_sizes() which is common to
pcpu_embed_first_chunk() and pcpu_lpage_first_chunk().

[ Impact: code reorganization and generalization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
2009-07-04 08:10:59 +09:00