scripts/kconfig/conf.c line 39 defines the default of input_mode as
oldaskconfig. Hence, 'make config' works in the same way even without
the --oldaskconfig option given. Note this in the help message.
This will be helpful to unify build rules in Makefile in the next
commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/kconfig/conf supports -? option to show the help message.
This is not wired up to Makefile, so nobody would notice this, but
it also shows 'invalid option' message.
$ ./scripts/kconfig/conf -?
./scripts/kconfig/conf: invalid option -- '?'
Usage: ./scripts/kconfig/conf [-s] [option] <kconfig-file>
[option] is _one_ of the following:
--listnewconfig List new options
--helpnewconfig List new options and help text
--oldaskconfig Start a new configuration using a line-oriented program
...
The reason is the '?' is missing in the short option list passed to
getopt_long().
While I fixed this issue, I also changed the option '?' to 'h'.
I prefer -h (or --help, if a long option is also desired).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
conf_askvalue() is only called for oldconfig, syncconfig, and
oldaskconfig. If it is called for other cases, it is a bug.
So, the code after the switch statement is unreachable.
Remove the dead code, and clean up the switch statement.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Unify the outer two if-conditionals into one. This decreases the
indent level by one.
Also, change the if-else blocks:
if (input_mode == listnewconfig) {
...
} else if (input_mode == helpnewconfig) {
...
} else {
...
}
into the switch statement.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use the saved returned value of sym_get_string_value() instead of
calling it twice.
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210215181511.2840674-2-mic@digikod.net
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since kernel configs provided by syzbot are close to "make allyesconfig",
it takes long time to rebuild. This is especially waste of time when we
need to rebuild for many times (e.g. doing manual printk() inspection,
bisect operations).
We can save time if we can exclude modules which are irrelevant to each
problem. But "make localmodconfig" cannot exclude modules which are built
into vmlinux because /sbin/lsmod output is used as the source of modules.
Therefore, this patch adds "make yes2modconfig" which converts from =y
to =m if possible. After confirming that the interested problem is still
reproducible, we can try "make localmodconfig" (and/or manually tune
based on "Modules linked in:" line) in order to exclude modules which are
irrelevant to the interested problem. While we are at it, this patch also
adds "make mod2yesconfig" which converts from =m to =y in case someone
wants to convert from =m to =y after "make localmodconfig".
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
make listnewconfig will list the individual options that need to be set.
This is useful but there's no easy way to get the help text associated
with the options at the same time. Introduce a new targe
'make helpnewconfig' which lists the full help text of all the
new options as well. This makes it easier to automatically generate
changes that are easy for humans to review. This command also adds
markers between each option for easier parsing.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is a spelling mistake in "changable", it is corrected to
"changeable" and all call sites are updated accordingly.
Signed-off-by: Marco Ammon <marco.ammon@fau.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, the argument for --defconfig is optional. If the argument
is not passed, the hard-coded default arch/$(ARCH)/defconfig is used.
It no longer happens in Linux since the last users of the default are
gone by the following commits:
- Commit f3e20ad67b ("s390: move arch/s390/defconfig to
arch/s390/configs/defconfig")
- Commit 986a13769c ("alpha: move arch/alpha/defconfig to
arch/alpha/configs/defconfig")
I want to kill the Linux-specific directory path embedded in the
Kconfig binary.
The --savedefconfig (reverse operation of --defconfig) requires an
argument, so it should not hurt to do likewise for --defconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If you run "make" in a pristine source tree, currently Kbuild will
start to build Kconfig to let it show the error message.
It would be more straightforward to check it in Makefile and let
it fail immediately.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
All files in lxdialog/ are licensed under GPL-2.0+, and the rest are
under GPL-2.0. I added GPL-2.0 tags to test scripts in tests/.
Documentation/process/license-rules.rst does not suggest anything
about the flex/bison files. Because flex does not accept the C++
comment style at the very top of a file, I used the C style for
zconf.l, and so for zconf.y for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As commit 312ee68752 ("kconfig: announce removal of oldnoconfig if
used") announced, it is time for the removal.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The top-level Makefile invokes "make syncconfig" when necessary.
Then, Kconfig displays the following message when .config is updated.
#
# configuration written to .config
#
It is distracting because "make syncconfig" happens during the build
stage, and does nothing important in most cases.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, only syncconfig creates or updates include/config/auto.conf
and some other files. Other config targets create or update only the
.config file.
When you configure and build the kernel from a pristine source tree,
any config target is followed by syncconfig in the build stage since
include/config/auto.conf is missing.
We are moving compiler tests from Makefile to Kconfig. It means that
parsing Kconfig files will be more costly since Kconfig invokes the
compiler commands internally. Thus, we want to avoid invoking Kconfig
twice (one for *config to create the .config, and one for syncconfig
to synchronize the auto.conf). If auto.conf does not exist, we can
generate all configuration files in the first configuration stage,
which will save the syncconfig in the build stage.
Please note this should be done only when auto.conf is missing. If
*config blindly did this, time stamp files under include/config/ would
be unnecessarily touched, triggering unneeded rebuild of objects.
I assume a scenario like this:
1. You have a source tree that has already been built
with CONFIG_FOO disabled
2. Run "make menuconfig" to enable CONFIG_FOO
3. CONFIG_FOO turns out to be unnecessary.
Run "make menuconfig" again to disable CONFIG_FOO
4. Run "make"
In this case, include/config/foo.h should not be touched since there
is no change in CONFIG_FOO. The sync process should be delayed until
the user really attempts to build the kernel.
This commit has another motivation; I want to suppress the 'No such
file or directory' warning from the 'include' directive.
The top-level Makefile includes auto.conf with '-include' directive,
like this:
ifeq ($(dot-config),1)
-include include/config/auto.conf
endif
This looks strange because auto.conf is mandatory when dot-config is 1.
I guess only the reason of using '-include' is to suppress the warning
'include/config/auto.conf: No such file or directory' when building
from a clean tree. However, this has a side-effect; Make considers
the files included by '-include' are optional. Hence, Make continues
to build even if it fails to generate include/config/auto.conf. I will
change this in the next commit, but the warning message is annoying.
(At least, kbuild test robot reports it as a regression.)
With this commit, Kconfig will generate all configuration files together
with the .config and I guess it is a solution good enough to suppress
the warning.
Note:
GNU Make 4.2 or later does not display the warning from the 'include'
directive if include files are successfully generated. See GNU Make
commit 87a5f98d248f ("[SV 102] Don't show unnecessary include file
errors.") However, older GNU Make versions are still widely used.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
syncconfig updates the .config only when sym_change_count > 0, i.e.
any change in config symbols has been detected.
Not only symbols but also comments are contained in the .config file.
If only comments are updated, they are not fed back to the .config,
then the stale comments are left-over. Of course, this is just a
matter of comments, but why not fix it.
I see some scenarios where this happens.
Scenario A:
1. You have a source tree that has already been configured.
2. Linus increments the version number in the top-level Makefile
(i.e. he commits a new release)
3. You pull it, and run 'make'
4. syncconfig is invoked because the environment variable,
KERNELVERSION is updated, but the .config is not updated since
no config symbol is changed.
5. The .config file contains a kernel version in the top line:
# Automatically generated file; DO NOT EDIT.
# Linux/arm64 4.18.0-rc2 Kernel Configuration
... which points to a previous version.
Scenario B:
1. You have a source tree that has already been configured.
2. You upgrade the compiler, but it still has the same version number.
This may happen if you regularly build the latest compiler from
the source code.
3. You run 'make'
4. syncconfig is invoked because the environment variable,
CC_VERSION_TEXT is updated, but the .config is not updated since
no config symbol is changed.
5. The .config file contains the version string of the compiler:
#
# Compiler: aarch64-linux-gcc (GCC) 9.0.0 20180628 (experimental)
#
... which carries the information of the old compiler.
If KCONFIG_NOSILENTUPDATE is set, syncconfig is not allowed to update
the .config file. Otherwise, it is fine to update it regardless of
sym_change_count.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The localization support is broken and appears unused.
There is no google hits on the update-po-config target.
And there is no recent (5 years) activity related to the localization.
So lets just drop this as it is no longer used.
Suggested-by: Ulf Magnusson <ulfalizer@gmail.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We at Red Hat/Fedora have generally tried to have a per file breakdown of
every config option we set. This makes it easy for us to add new options
when they are exposed and keep a changelog of why they were set.
A Fedora example is here:
https://src.fedoraproject.org/cgit/rpms/kernel.git/tree/configs/fedora/generic
Using various merge scripts, we build up a config file and run it through
'make listnewconfig' and 'make oldnoconfig'. The idea is to print out new
config options that haven't been manually set and use the default until
a patch is posted to set it properly.
To speed things up, it would be nice to make it easier to generate a
patch to post the default setting. The output of 'make listnewconfig'
has two issues that limit us:
- it doesn't provide the default value
- it doesn't provide the new 'choice' options that get flagged in
'oldconfig'
This patch extends 'listnewconfig' to address the above two issues.
This allows us to run a script
make listnewconfig | rhconfig-tool -o patches; git send-email patches/
The output of 'make listnewconfig':
CONFIG_NET_EMATCH_IPT
CONFIG_IPVLAN
CONFIG_ICE
CONFIG_NET_VENDOR_NI
CONFIG_IEEE802154_MCR20A
CONFIG_IR_IMON_DECODER
CONFIG_IR_IMON_RAW
The new output of 'make listnewconfig':
CONFIG_KERNEL_XZ=n
CONFIG_KERNEL_LZO=n
CONFIG_NET_EMATCH_IPT=n
CONFIG_IPVLAN=n
CONFIG_ICE=n
CONFIG_NET_VENDOR_NI=y
CONFIG_IEEE802154_MCR20A=n
CONFIG_IR_IMON_DECODER=n
CONFIG_IR_IMON_RAW=n
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
As commit cedd55d49d ("kconfig: Remove silentoldconfig from help
and docs; fix kconfig/conf's help") mentioned, 'silentoldconfig' is a
historical misnomer. That commit removed it from help and docs since
it is an internal interface. If so, it should be allowed to rename
it to something more intuitive. 'syncconfig' is the one I came up
with because it updates the .config if necessary, then synchronize
include/generated/autoconf.h and include/config/* with it.
You should not manually invoke 'silentoldcofig'. Display warning if
used in case existing scripts are doing wrong.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Historically, "make oldconfig" has changed its behavior several times,
quieter or louder. (I attached the history below.) Currently, it is
not as quiet as it should be. This commit addresses it.
Test Case
---------
---------------------------(Kconfig)----------------------------
menu "menu"
config FOO
bool "foo"
menu "sub menu"
config BAR
bool "bar"
endmenu
endmenu
menu "sibling menu"
config BAZ
bool "baz"
endmenu
----------------------------------------------------------------
---------------------------(.config)----------------------------
CONFIG_BAR=y
CONFIG_BAZ=y
----------------------------------------------------------------
With the Kconfig and .config above, "make silentoldconfig" and
"make oldconfig" work differently, like follows:
$ make silentoldconfig
scripts/kconfig/conf --silentoldconfig Kconfig
*
* Restart config...
*
*
* menu
*
foo (FOO) [N/y/?] (NEW) y
#
# configuration written to .config
#
$ make oldconfig
scripts/kconfig/conf --oldconfig Kconfig
*
* Restart config...
*
*
* menu
*
foo (FOO) [N/y/?] (NEW) y
*
* sub menu
*
bar (BAR) [Y/n/?] y
#
# configuration written to .config
#
Both hide "sibling node" since it is irrelevant. The difference is
that silentoldconfig hides "sub menu" whereas oldconfig does not.
The behavior of silentoldconfig is preferred since the "sub menu"
does not contain any new symbol.
The root cause is in conf(). There are three input modes that can
call conf(); oldaskconfig, oldconfig, and silentoldconfig.
Everytime conf() encounters a menu entry, it calls check_conf() to
check if it contains new symbols. If no new symbol is found, the
menu is just skipped.
Currently, this happens only when input_mode == silentoldconfig.
The oldaskconfig enters into the check_conf() loop as silentoldconfig,
so oldaskconfig works likewise for the second loop or later, but it
never happens for oldconfig. So, irrelevant sub-menus are shown for
oldconfig.
Change the test condition to "input_mode != oldaskconfig". This is
false only for the first loop of oldaskconfig; it must ask the user
all symbols, so no need to call check_conf().
History of oldconfig
--------------------
[0] Originally, "make oldconfig" was as loud as "make config" (It
showed the entire .config file)
[1] Commit cd9140e1e7 ("kconfig: make oldconfig is now less chatty")
made oldconfig quieter, but it was still less quieter than
silentoldconfig. (oldconfig did not hide sub-menus)
[2] Commit 204c96f609 ("kconfig: fix silentoldconfig") changed
the input_mode of oldconfig to "ask_silent" from "ask_new".
So, oldconfig really became as quiet as silentoldconfig.
(oldconfig hided irrelevant sub-menus)
[3] Commit 4062f1a4c0 ("kconfig: use long options in conf") made
oldconfig as loud as [0] due to misconversion.
[4] Commit 1482834971 ("kconfig: fix make oldconfig") addressed
the misconversion of [3], but it made oldconfig quieter only to
the same level as [1], not [2].
This commit is restoring the behavior of [2].
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
check_conf() never increments conf_cnt for listnewconfig, so conf_cnt
is always zero.
In other words, conf_cnt is not zero, "input_mode != listnewconfig"
is met.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
conf() is never called for listnewconfig / olddefconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
check_conf() traverses the menu tree, but it is completely no-op for
olddefconfig because the following if-else block does nothing.
if (input_mode == listnewconfig) {
...
} else if (input_mode != olddefconfig) {
...
}
As the help message says, olddefconfig automatically sets new symbols
to their default value. There is no room for manual intervention.
So, calling check_conf() for olddefconfig is odd in the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
These messages should be directed to stderr.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
If stdio is not tty, conf_askvalue() puts additional new line to
prevent prompts from being concatenated into a single line. This
care is missing in conf_choice(), so a 'choice' prompt and the next
prompt are shown in the same line.
Move the code into xfgets() to cater to all cases. To improve this
more, let's echo stdin to stdout. This clarifies what keys were
input from stdio and the stdout looks like as if it were from tty.
I removed the isatty(2) check since stderr is unrelated here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Except silentoldconfig, valid_stdin is 1, so check_stdin() is no-op.
oldconfig and silentoldconfig work almost in the same way except that
the latter generates additional files under include/. Both ask users
for input for new symbols.
I do not know why only silentoldconfig requires stdio be tty.
$ rm -f .config; touch .config
$ yes "" | make oldconfig > stdout
$ rm -f .config; touch .config
$ yes "" | make silentoldconfig > stdout
make[1]: *** [silentoldconfig] Error 1
make: *** [silentoldconfig] Error 2
$ tail -n 4 stdout
Console input/output is redirected. Run 'make oldconfig' to update configuration.
scripts/kconfig/Makefile:40: recipe for target 'silentoldconfig' failed
Makefile:507: recipe for target 'silentoldconfig' failed
Redirection is useful, for example, for testing where we want to give
particular key inputs from a test file, then check the result.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
'make config', 'make oldconfig', etc. always receive '?' as a valid
input and show useful information even if no help text is available.
------------------------>8------------------------
foo (FOO) [N/y] (NEW) ?
There is no help available for this option.
Symbol: FOO [=n]
Type : bool
Prompt: foo
Defined at Kconfig:1
------------------------>8------------------------
However, '?' is not shown in the prompt if its help text is missing.
Let's show '?' all the time so that the prompt and the behavior match.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
As explained by Michal Marek at https://lkml.org/lkml/2011/8/31/189
silentoldconfig has become a misnomer. It has become an internal interface
so remove it from "make help" and Documentation/ to stop confusing people
using it as seen for instance at
https://chromium-review.googlesource.com/835632 Don't remove it from
kconfig/Makefile yet not to break any (other) tool using it.
On the other hand, correct and expand its description in the help of
the (internal) scripts/kconfig/conf.c
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Sparse reports:
warning: symbol 'xfgets' was not declared. Should it be static?
It is declared as static, but it is missing in the definition part.
Move the definition up and remove the forward declaration.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The current (arbitrary) limit of 128 characters for path names has
proven too short for Android builds, as longer path names are used
there.
Change conf.c, so it can handle path lengths up to PATH_MAX characters.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Add an -s option to the various frontends and pass it when make -s is
used. Also, use $(kecho) instead of @echo in the Makefile.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Because of choice-in-a-choice constructs, it can happen that not all
symbols are assigned a value during randconfig, leading in rare cases
to this situation:
---8<--- choice-in-choice.in
choice
bool "A/B/C"
config A
bool "A"
config B
bool "B"
if B
choice
bool "E/F"
config E
bool "E"
config F
bool "F"
endchoice
endif # B
config C
bool "C"
endchoice
---8<---
$ ./scripts/kconfig/conf --randconfig choice-in-choice.in
[--SNIP--]
$ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null
[--SNIP--]
A/B/C
1. A (A)
> 2. B (B)
3. C (C)
choice[1-3]: 2
E/F
> 1. E (E) (NEW)
2. F (F) (NEW)
choice[1-2]: aborted!
Console input/output is redirected. Run 'make oldconfig' to update
configuration.
Fix this by looping in randconfig for as long as some symbol gets assigned
a value.
Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP),
which uses this choice-in-a-choice construct, and exhibits this problem.
The example above is just a stripped-down minimalist test-case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For reproducibility, it can be useful to be able to specify the
seed to use to seed the RNG.
Add a new KCONFIG_SEED environment variable which can be set to
the seed to use:
$ make KCONFIG_SEED=42 randconfig
$ sha1sum .config
70a128c8dcc61303069e1be352cce64114dfcbca .config
$ make KCONFIG_SEED=42 randconfig
$ sha1sum .config
70a128c8dcc61303069e1be352cce64114dfcbca .config
It's very usefull for eg. debugging the kconfig parser.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
According to Documentation/kbuild/kconfig.txt, the commands:
yes "" | make oldconfig >conf.new
grep "(NEW)" conf.new
should list the new config symbols with their default values.
However, currently there is no line break after each new symbol. When
kconfig is interactive the user will type a new-line at this point,
but when non-interactive kconfig must print it.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reference: http://bugs.debian.org/636029
[regid23@nt1.in: Adjusted Ben's work to apply cleanly to this tree]
Reported-and-tested-by: Regid Ichira <regid23@nt1.in>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
As 67d34a6a39 said, 'oldnoconfig' doesn't
set new symbols to 'n', but instead sets it to their default values.
So, this patch replaces 'oldnoconfig' with 'olddefconfig', stop making
people confused, and keep the old name 'oldnoconfig' as an alias,
because people already are dependent on its behavior with the
counter-intuitive name.
Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
As 67d34a6a39 said, the make target
'oldnoconfig' is a misnomer. It doesn't set new symbols to 'n', but
instead sets it to their default values.
This patch fixes the document in conf.c, and will submit another patch
to replace 'oldnoconfig' to 'olddefconfig'
Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Prevent subtle surprises to both people working on the kconfig code
and people using make allnoconfig allyesconfig allmoconfig and
randconfig by only attempting to read a config file if
KCONFIG_ALLCONFIG is set.
Common sense suggests attempting to read the extra config files does
not make sense unless requested. The documentation says the code
won't attempt to read the extra config files unless requested.
Current usage does not appear to include people depending on the code
reading the config files without the variable being set So do the
simple thing and stop reading config files when passed
all{no,yes,mod,def,rand}config unless KCONFIG_ALLCONFIG environment
variable is set.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
- Only try to read the file specified if KCONFIG_ALL_CONFIG is set to
something other than the empty string or "1".
- Don't use stat to check the name passed to conf_read_simple so that
zconf_fopen can find the file in the current directory or in SRCTREE
removing a extremely source of confusing failure, where KCONFIG_ALL_CONFIG
was not interpreted with respect to the directory make was called in.
- If conf_read_simple fails complain clearly and stop processing.
Allowing the simple debugging of typos.
- Clearly document the behavior so it is clear to users which
values are treated as flags and which values are treated as
filenames.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This function has not much reason to be public. In the mean time, convert
declaration from K&R C to ISO C.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
This variable is not used outside of main() so there is not much reason keeping
it global. Ensure it is initialized as gcc has no way to know that normal
execution path expect only one option switch to be given on the command line
(except when we request help). As a result, we always initialize
`defconfig_file' before using it.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Commit 40aee729b3 ('kconfig: fix default value for choice input')
fixed some cases where kconfig would select the wrong option from a
choice with a single valid option and thus enter an infinite loop.
However, this broke the test for user input of the form 'N?', because
when kconfig selects the single valid option the input is zero-length
and the test will read the byte before the input buffer. If this
happens to contain '?' (as it will in a mips build on Debian unstable
today) then kconfig again enters an infinite loop.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@kernel.org [2.6.17+]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>