Commit Graph

902 Commits

Author SHA1 Message Date
Linus Torvalds 48aab2f79d security: optimize avc_audit() common path
avc_audit() did a lot of jumping around and had a big stack frame, all
for the uncommon case.

Split up the uncommon case (which we really can't make go fast anyway)
into its own slow function, and mark the conditional branches
appropriately for the common likely case.

This causes avc_audit() to no longer show up as one of the hottest
functions on the branch profiles (the new "perf -b" thing), and makes
the cycle profiles look really nice and dense too.

The whole audit path is still annoyingly very much one of the biggest
costs of name lookup, so these things are worth optimizing for.  I wish
we could just tell people to turn it off, but realistically we do need
it: we just need to make sure that the overhead of the necessary evil is
as low as possible.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 17:01:41 -07:00
David Howells 1fd36adcd9 Replace the fd_sets in struct fdtable with an array of unsigned longs
Replace the fd_sets in struct fdtable with an array of unsigned longs and then
use the standard non-atomic bit operations rather than the FD_* macros.

This:

 (1) Removes the abuses of struct fd_set:

     (a) Since we don't want to allocate a full fd_set the vast majority of the
     	 time, we actually, in effect, just allocate a just-big-enough array of
     	 unsigned longs and cast it to an fd_set type - so why bother with the
     	 fd_set at all?

     (b) Some places outside of the core fdtable handling code (such as
     	 SELinux) want to look inside the array of unsigned longs hidden inside
     	 the fd_set struct for more efficient iteration over the entire set.

 (2) Eliminates the use of FD_*() macros in the kernel completely.

 (3) Permits the __FD_*() macros to be deleted entirely where not exposed to
     userspace.

Signed-off-by: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120216174954.23314.48147.stgit@warthog.procyon.org.uk
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
2012-02-19 10:30:57 -08:00
Al Viro 4040153087 security: trim security.h
Trim security.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Morris <jmorris@namei.org>
2012-02-14 10:45:42 +11:00
Linus Torvalds c49c41a413 Merge branch 'for-linus' of git://selinuxproject.org/~jmorris/linux-security
* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security:
  capabilities: remove __cap_full_set definition
  security: remove the security_netlink_recv hook as it is equivalent to capable()
  ptrace: do not audit capability check when outputing /proc/pid/stat
  capabilities: remove task_ns_* functions
  capabitlies: ns_capable can use the cap helpers rather than lsm call
  capabilities: style only - move capable below ns_capable
  capabilites: introduce new has_ns_capabilities_noaudit
  capabilities: call has_ns_capability from has_capability
  capabilities: remove all _real_ interfaces
  capabilities: introduce security_capable_noaudit
  capabilities: reverse arguments to security_capable
  capabilities: remove the task from capable LSM hook entirely
  selinux: sparse fix: fix several warnings in the security server cod
  selinux: sparse fix: fix warnings in netlink code
  selinux: sparse fix: eliminate warnings for selinuxfs
  selinux: sparse fix: declare selinux_disable() in security.h
  selinux: sparse fix: move selinux_complete_init
  selinux: sparse fix: make selinux_secmark_refcount static
  SELinux: Fix RCU deref check warning in sel_netport_insert()

Manually fix up a semantic mis-merge wrt security_netlink_recv():

 - the interface was removed in commit fd77846152 ("security: remove
   the security_netlink_recv hook as it is equivalent to capable()")

 - a new user of it appeared in commit a38f7907b9 ("crypto: Add
   userspace configuration API")

causing no automatic merge conflict, but Eric Paris pointed out the
issue.
2012-01-14 18:36:33 -08:00
Linus Torvalds e7691a1ce3 Merge branch 'for-linus' of git://selinuxproject.org/~jmorris/linux-security
* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security: (32 commits)
  ima: fix invalid memory reference
  ima: free duplicate measurement memory
  security: update security_file_mmap() docs
  selinux: Casting (void *) value returned by kmalloc is useless
  apparmor: fix module parameter handling
  Security: tomoyo: add .gitignore file
  tomoyo: add missing rcu_dereference()
  apparmor: add missing rcu_dereference()
  evm: prevent racing during tfm allocation
  evm: key must be set once during initialization
  mpi/mpi-mpow: NULL dereference on allocation failure
  digsig: build dependency fix
  KEYS: Give key types their own lockdep class for key->sem
  TPM: fix transmit_cmd error logic
  TPM: NSC and TIS drivers X86 dependency fix
  TPM: Export wait_for_stat for other vendor specific drivers
  TPM: Use vendor specific function for status probe
  tpm_tis: add delay after aborting command
  tpm_tis: Check return code from getting timeouts/durations
  tpm: Introduce function to poll for result of self test
  ...

Fix up trivial conflict in lib/Makefile due to addition of CONFIG_MPI
and SIGSIG next to CONFIG_DQL addition.
2012-01-10 21:51:23 -08:00
James Morris 8fcc995495 Merge branch 'next' into for-linus
Conflicts:
	security/integrity/evm/evm_crypto.c

Resolved upstream fix vs. next conflict manually.

Signed-off-by: James Morris <jmorris@namei.org>
2012-01-09 12:16:48 +11:00
Linus Torvalds 972b2c7199 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...
2012-01-08 12:19:57 -08:00
Al Viro d8c9584ea2 vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06 23:16:53 -05:00
Eric Paris fd77846152 security: remove the security_netlink_recv hook as it is equivalent to capable()
Once upon a time netlink was not sync and we had to get the effective
capabilities from the skb that was being received.  Today we instead get
the capabilities from the current task.  This has rendered the entire
purpose of the hook moot as it is now functionally equivalent to the
capable() call.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:53:01 -05:00
Eric Paris 69f594a389 ptrace: do not audit capability check when outputing /proc/pid/stat
Reading /proc/pid/stat of another process checks if one has ptrace permissions
on that process.  If one does have permissions it outputs some data about the
process which might have security and attack implications.  If the current
task does not have ptrace permissions the read still works, but those fields
are filled with inocuous (0) values.  Since this check and a subsequent denial
is not a violation of the security policy we should not audit such denials.

This can be quite useful to removing ptrace broadly across a system without
flooding the logs when ps is run or something which harmlessly walks proc.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge E. Hallyn <serge.hallyn@canonical.com>
2012-01-05 18:53:00 -05:00
Eric Paris 6a9de49115 capabilities: remove the task from capable LSM hook entirely
The capabilities framework is based around credentials, not necessarily the
current task.  Yet we still passed the current task down into LSMs from the
security_capable() LSM hook as if it was a meaningful portion of the security
decision.  This patch removes the 'generic' passing of current and instead
forces individual LSMs to use current explicitly if they think it is
appropriate.  In our case those LSMs are SELinux and AppArmor.

I believe the AppArmor use of current is incorrect, but that is wholely
unrelated to this patch.  This patch does not change what AppArmor does, it
just makes it clear in the AppArmor code that it is doing it.

The SELinux code still uses current in it's audit message, which may also be
wrong and needs further investigation.  Again this is NOT a change, it may
have always been wrong, this patch just makes it clear what is happening.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:52:53 -05:00
James Morris 2653812e14 selinux: sparse fix: fix several warnings in the security server cod
Fix several sparse warnings in the SELinux security server code.

Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:52:52 -05:00
James Morris 02f5daa563 selinux: sparse fix: fix warnings in netlink code
Fix sparse warnings in SELinux Netlink code.

Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:52:51 -05:00
James Morris e8a65a3f67 selinux: sparse fix: eliminate warnings for selinuxfs
Fixes several sparse warnings for selinuxfs.c

Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:52:50 -05:00
James Morris 6063c0461b selinux: sparse fix: declare selinux_disable() in security.h
Sparse fix: declare selinux_disable() in security.h

Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:52:50 -05:00
James Morris 5c884c1d4a selinux: sparse fix: move selinux_complete_init
Sparse fix: move selinux_complete_init

Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:52:49 -05:00
James Morris b46610caba selinux: sparse fix: make selinux_secmark_refcount static
Sparse fix: make selinux_secmark_refcount  static.

Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:52:48 -05:00
Al Viro dba19c6064 get rid of open-coded S_ISREG(), etc.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:12 -05:00
Al Viro 1a67aafb5f switch ->mknod() to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:54 -05:00
Al Viro 4acdaf27eb switch ->create() to umode_t
vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:53 -05:00
Al Viro 18bb1db3e7 switch vfs_mkdir() and ->mkdir() to umode_t
vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:53 -05:00
David S. Miller abb434cb05 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/bluetooth/l2cap_core.c

Just two overlapping changes, one added an initialization of
a local variable, and another change added a new local variable.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-23 17:13:56 -05:00
David Howells 50345f1ea9 SELinux: Fix RCU deref check warning in sel_netport_insert()
Fix the following bug in sel_netport_insert() where rcu_dereference() should
be rcu_dereference_protected() as sel_netport_lock is held.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
security/selinux/netport.c:127 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by ossec-rootcheck/3323:
 #0:  (sel_netport_lock){+.....}, at: [<ffffffff8117d775>] sel_netport_sid+0xbb/0x226

stack backtrace:
Pid: 3323, comm: ossec-rootcheck Not tainted 3.1.0-rc8-fsdevel+ #1095
Call Trace:
 [<ffffffff8105cfb7>] lockdep_rcu_dereference+0xa7/0xb0
 [<ffffffff8117d871>] sel_netport_sid+0x1b7/0x226
 [<ffffffff8117d6ba>] ? sel_netport_avc_callback+0xbc/0xbc
 [<ffffffff8117556c>] selinux_socket_bind+0x115/0x230
 [<ffffffff810a5388>] ? might_fault+0x4e/0x9e
 [<ffffffff810a53d1>] ? might_fault+0x97/0x9e
 [<ffffffff81171cf4>] security_socket_bind+0x11/0x13
 [<ffffffff812ba967>] sys_bind+0x56/0x95
 [<ffffffff81380dac>] ? sysret_check+0x27/0x62
 [<ffffffff8105b767>] ? trace_hardirqs_on_caller+0x11e/0x155
 [<ffffffff81076fcd>] ? audit_syscall_entry+0x17b/0x1ae
 [<ffffffff811b5eae>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff81380d7b>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
2011-12-21 11:28:56 +11:00
David Howells 94d4ef0c2b SELinux: Fix RCU deref check warning in sel_netport_insert()
Fix the following bug in sel_netport_insert() where rcu_dereference() should
be rcu_dereference_protected() as sel_netport_lock is held.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
security/selinux/netport.c:127 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by ossec-rootcheck/3323:
 #0:  (sel_netport_lock){+.....}, at: [<ffffffff8117d775>] sel_netport_sid+0xbb/0x226

stack backtrace:
Pid: 3323, comm: ossec-rootcheck Not tainted 3.1.0-rc8-fsdevel+ #1095
Call Trace:
 [<ffffffff8105cfb7>] lockdep_rcu_dereference+0xa7/0xb0
 [<ffffffff8117d871>] sel_netport_sid+0x1b7/0x226
 [<ffffffff8117d6ba>] ? sel_netport_avc_callback+0xbc/0xbc
 [<ffffffff8117556c>] selinux_socket_bind+0x115/0x230
 [<ffffffff810a5388>] ? might_fault+0x4e/0x9e
 [<ffffffff810a53d1>] ? might_fault+0x97/0x9e
 [<ffffffff81171cf4>] security_socket_bind+0x11/0x13
 [<ffffffff812ba967>] sys_bind+0x56/0x95
 [<ffffffff81380dac>] ? sysret_check+0x27/0x62
 [<ffffffff8105b767>] ? trace_hardirqs_on_caller+0x11e/0x155
 [<ffffffff81076fcd>] ? audit_syscall_entry+0x17b/0x1ae
 [<ffffffff811b5eae>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff81380d7b>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-12-20 14:38:53 -05:00
Thomas Meyer 2ff6fa8faf selinux: Casting (void *) value returned by kmalloc is useless
The semantic patch that makes this change is available
in scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: James Morris <jmorris@namei.org>
2011-12-19 11:23:56 +11:00
Pavel Emelyanov 7f1fb60c4f inet_diag: Partly rename inet_ to sock_
The ultimate goal is to get the sock_diag module, that works in
family+protocol terms. Currently this is suitable to do on the
inet_diag basis, so rename parts of the code. It will be moved
to sock_diag.c later.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06 13:57:36 -05:00
Jesse Gross 75f2811c64 ipv6: Add fragment reporting to ipv6_skip_exthdr().
While parsing through IPv6 extension headers, fragment headers are
skipped making them invisible to the caller.  This reports the
fragment offset of the last header in order to make it possible to
determine whether the packet is fragmented and, if so whether it is
a first or last fragment.

Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-12-03 09:35:10 -08:00
Alexey Dobriyan 4e3fd7a06d net: remove ipv6_addr_copy()
C assignment can handle struct in6_addr copying.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22 16:43:32 -05:00
James Morris 24942c8e5c Merge branch 'master'; commit 'v3.2-rc2' into next 2011-11-16 12:39:48 +11:00
Andy Shevchenko af7ff2c2c4 selinuxfs: remove custom hex_to_bin()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <jmorris@namei.org>
2011-11-16 11:30:26 +11:00
Paul Gortmaker 44fc7ea0bf selinux: Add export.h to files using EXPORT_SYMBOL/THIS_MODULE
The pervasive, but implicit presence of <linux/module.h> meant
that things like this file would happily compile as-is.  But
with the desire to phase out the module.h being included everywhere,
point this file at export.h which will give it THIS_MODULE and
the EXPORT_SYMBOL variants.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:32 -04:00
James Morris 7b98a5857c selinux: sparse fix: fix several warnings in the security server code
Fix several sparse warnings in the SELinux security server code.

Signed-off-by: James Morris <jmorris@namei.org>
2011-09-09 16:56:32 -07:00
James Morris 0ff53f5ddb selinux: sparse fix: include selinux.h in exports.c
Fix warning:
security/selinux/exports.c:18:6: warning: symbol 'selinux_is_enabled' was not declared. Should it be static?

Signed-off-by: James Morris <jmorris@namei.org>
2011-09-09 16:56:32 -07:00
James Morris 6a3fbe8117 selinux: sparse fix: fix warnings in netlink code
Fix sparse warnings in SELinux Netlink code.

Signed-off-by: James Morris <jmorris@namei.org>
2011-09-09 16:56:31 -07:00
James Morris ad3fa08c4f selinux: sparse fix: eliminate warnings for selinuxfs
Fixes several sparse warnings for selinuxfs.c

Signed-off-by: James Morris <jmorris@namei.org>
2011-09-09 16:56:30 -07:00
James Morris 58982b7483 selinux: sparse fix: declare selinux_disable() in security.h
Sparse fix: declare selinux_disable() in security.h

Signed-off-by: James Morris <jmorris@namei.org>
2011-09-09 16:56:26 -07:00
James Morris cc59a582d6 selinux: sparse fix: move selinux_complete_init
Sparse fix: move selinux_complete_init

Signed-off-by: James Morris <jmorris@namei.org>
2011-09-09 16:56:26 -07:00
James Morris 56a4ca9961 selinux: sparse fix: make selinux_secmark_refcount static
Sparse fix: make selinux_secmark_refcount  static.

Signed-off-by: James Morris <jmorris@namei.org>
2011-09-09 16:56:25 -07:00
Paul Moore 82c21bfab4 doc: Update the email address for Paul Moore in various source files
My @hp.com will no longer be valid starting August 5, 2011 so an update is
necessary.  My new email address is employer independent so we don't have
to worry about doing this again any time soon.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-01 17:58:33 -07:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Tim Chen 423e0ab086 VFS : mount lock scalability for internal mounts
For a number of file systems that don't have a mount point (e.g. sockfs
and pipefs), they are not marked as long term. Therefore in
mntput_no_expire, all locks in vfs_mount lock are taken instead of just
local cpu's lock to aggregate reference counts when we release
reference to file objects.  In fact, only local lock need to have been
taken to update ref counts as these file systems are in no danger of
going away until we are ready to unregister them.

The attached patch marks file systems using kern_mount without
mount point as long term.  The contentions of vfs_mount lock
is now eliminated.  Before un-registering such file system,
kern_unmount should be called to remove the long term flag and
make the mount point ready to be freed.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-24 10:08:32 -04:00
Linus Torvalds bbd9d6f7fb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits)
  vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp
  isofs: Remove global fs lock
  jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory
  fix IN_DELETE_SELF on overwriting rename() on ramfs et.al.
  mm/truncate.c: fix build for CONFIG_BLOCK not enabled
  fs:update the NOTE of the file_operations structure
  Remove dead code in dget_parent()
  AFS: Fix silly characters in a comment
  switch d_add_ci() to d_splice_alias() in "found negative" case as well
  simplify gfs2_lookup()
  jfs_lookup(): don't bother with . or ..
  get rid of useless dget_parent() in btrfs rename() and link()
  get rid of useless dget_parent() in fs/btrfs/ioctl.c
  fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
  drivers: fix up various ->llseek() implementations
  fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek
  Ext4: handle SEEK_HOLE/SEEK_DATA generically
  Btrfs: implement our own ->llseek
  fs: add SEEK_HOLE and SEEK_DATA flags
  reiserfs: make reiserfs default to barrier=flush
  ...

Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new
shrinker callout for the inode cache, that clashed with the xfs code to
start the periodic workers later.
2011-07-22 19:02:39 -07:00
Linus Torvalds 0342cbcfce Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: Fix wrong check in list_splice_init_rcu()
  net,rcu: Convert call_rcu(xt_rateest_free_rcu) to kfree_rcu()
  sysctl,rcu: Convert call_rcu(free_head) to kfree
  vmalloc,rcu: Convert call_rcu(rcu_free_vb) to kfree_rcu()
  vmalloc,rcu: Convert call_rcu(rcu_free_va) to kfree_rcu()
  ipc,rcu: Convert call_rcu(ipc_immediate_free) to kfree_rcu()
  ipc,rcu: Convert call_rcu(free_un) to kfree_rcu()
  security,rcu: Convert call_rcu(sel_netport_free) to kfree_rcu()
  security,rcu: Convert call_rcu(sel_netnode_free) to kfree_rcu()
  ia64,rcu: Convert call_rcu(sn_irq_info_free) to kfree_rcu()
  block,rcu: Convert call_rcu(disk_free_ptbl_rcu_cb) to kfree_rcu()
  scsi,rcu: Convert call_rcu(fc_rport_free_rcu) to kfree_rcu()
  audit_tree,rcu: Convert call_rcu(__put_tree) to kfree_rcu()
  security,rcu: Convert call_rcu(whitelist_item_free) to kfree_rcu()
  md,rcu: Convert call_rcu(free_conf) to kfree_rcu()
2011-07-22 16:44:08 -07:00
Linus Torvalds 8209f53d79 Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (39 commits)
  ptrace: do_wait(traced_leader_killed_by_mt_exec) can block forever
  ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction
  connector: add an event for monitoring process tracers
  ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED
  ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task()
  ptrace_init_task: initialize child->jobctl explicitly
  has_stopped_jobs: s/task_is_stopped/SIGNAL_STOP_STOPPED/
  ptrace: make former thread ID available via PTRACE_GETEVENTMSG after PTRACE_EVENT_EXEC stop
  ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/
  ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented()
  ptrace: ptrace_reparented() should check same_thread_group()
  redefine thread_group_leader() as exit_signal >= 0
  do not change dead_task->exit_signal
  kill task_detached()
  reparent_leader: check EXIT_DEAD instead of task_detached()
  make do_notify_parent() __must_check, update the callers
  __ptrace_detach: avoid task_detached(), check do_notify_parent()
  kill tracehook_notify_death()
  make do_notify_parent() return bool
  ptrace: s/tracehook_tracer_task()/ptrace_parent()/
  ...
2011-07-22 15:06:50 -07:00
Lai Jiangshan 449a68cc65 security,rcu: Convert call_rcu(sel_netport_free) to kfree_rcu()
The rcu callback sel_netport_free() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(sel_netport_free).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Eric Paris <eparis@parisplace.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-07-20 14:10:15 -07:00
Lai Jiangshan 9801c60e99 security,rcu: Convert call_rcu(sel_netnode_free) to kfree_rcu()
The rcu callback sel_netnode_free() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(sel_netnode_free).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Eric Paris <eparis@parisplace.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-07-20 14:10:14 -07:00
Al Viro cf1dd1dae8 selinux: don't transliterate MAY_NOT_BLOCK to IPERM_FLAG_RCU
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:27 -04:00
Al Viro e74f71eb78 ->permission() sanitizing: don't pass flags to ->inode_permission()
pass that via mask instead.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:26 -04:00
Tejun Heo 06d984737b ptrace: s/tracehook_tracer_task()/ptrace_parent()/
tracehook.h is on the way out.  Rename tracehook_tracer_task() to
ptrace_parent() and move it from tracehook.h to ptrace.h.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22 19:26:29 +02:00
James Morris 82b88bb24e Merge branch 'for-linus' of git://git.infradead.org/users/eparis/selinux into for-linus 2011-06-15 09:41:48 +10:00
Roy.Li ded509880f SELinux: skip file_name_trans_write() when policy downgraded.
When policy version is less than POLICYDB_VERSION_FILENAME_TRANS,
skip file_name_trans_write().

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-06-14 12:58:51 -04:00
Linus Torvalds 95f4efb2d7 selinux: simplify and clean up inode_has_perm()
This is a rather hot function that is called with a potentially NULL
"struct common_audit_data" pointer argument.  And in that case it has to
provide and initialize its own dummy common_audit_data structure.

However, all the _common_ cases already pass it a real audit-data
structure, so that uncommon NULL case not only creates a silly run-time
test, more importantly it causes that function to have a big stack frame
for the dummy variable that isn't even used in the common case!

So get rid of that stupid run-time behavior, and make the (few)
functions that currently call with a NULL pointer just call a new helper
function instead (naturally called inode_has_perm_noapd(), since it has
no adp argument).

This makes the run-time test be a static code generation issue instead,
and allows for a much denser stack since none of the common callers need
the dummy structure.  And a denser stack not only means less stack space
usage, it means better cache behavior.  So we have a win-win-win from
this simplification: less code executed, smaller stack footprint, and
better cache behavior.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-08 15:11:56 -07:00
Linus Torvalds f01e1af445 selinux: don't pass in NULL avd to avc_has_perm_noaudit
Right now security_get_user_sids() will pass in a NULL avd pointer to
avc_has_perm_noaudit(), which then forces that function to have a dummy
entry for that case and just generally test it.

Don't do it.  The normal callers all pass a real avd pointer, and this
helper function is incredibly hot.  So don't make avc_has_perm_noaudit()
do conditional stuff that isn't needed for the common case.

This also avoids some duplicated stack space.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 18:13:57 -07:00
Kohei Kaigai 0f7e4c33eb selinux: fix case of names with whitespace/multibytes on /selinux/create
I submit the patch again, according to patch submission convension.

This patch enables to accept percent-encoded object names as forth
argument of /selinux/create interface to avoid possible bugs when we
give an object name including whitespace or multibutes.

E.g) if and when a userspace object manager tries to create a new object
 named as "resolve.conf but fake", it shall give this name as the forth
 argument of the /selinux/create. But sscanf() logic in kernel space
 fetches only the part earlier than the first whitespace.
 In this case, selinux may unexpectedly answer a default security context
 configured to "resolve.conf", but it is bug.

Although I could not test this patch on named TYPE_TRANSITION rules
actually, But debug printk() message seems to me the logic works
correctly.
I assume the libselinux provides an interface to apply this logic
transparently, so nothing shall not be changed from the viewpoint of
application.

Signed-off-by: KaiGai Kohei <kohei.kaigai@emea.nec.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-05-26 17:20:53 -04:00
Eric Paris ea77f7a2e8 Merge commit 'v2.6.39' into 20110526
Conflicts:
	lib/flex_array.c
	security/selinux/avc.c
	security/selinux/hooks.c
	security/selinux/ss/policydb.c
	security/smack/smack_lsm.c
2011-05-26 17:20:14 -04:00
James Morris b7b57551bb Merge branch 'master' of git://git.infradead.org/users/eparis/selinux into for-linus
Conflicts:
	lib/flex_array.c
	security/selinux/avc.c
	security/selinux/hooks.c
	security/selinux/ss/policydb.c
	security/smack/smack_lsm.c

Manually resolve conflicts.

Signed-off-by: James Morris <jmorris@namei.org>
2011-05-24 23:20:19 +10:00
Linus Torvalds 57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
Linus Torvalds 257313b2a8 selinux: avoid unnecessary avc cache stat hit count
There is no point in counting hits - we can calculate it from the number
of lookups and misses.

This makes the avc statistics a bit smaller, and makes the code
generation better too.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-19 21:22:53 -07:00
Linus Torvalds 044aea9b83 selinux: de-crapify avc cache stat code generation
You can turn off the avc cache stats, but distributions seem to not do
that (perhaps because several performance tuning how-to's talk about the
avc cache statistics).

Which is sad, because the code it generates is truly horrendous, with
the statistics update being sandwitched between get_cpu/put_cpu which in
turn causes preemption disables etc.  We're talking ten+ instructions
just to increment a per-cpu variable in some pretty hot code.

Fix the craziness by just using 'this_cpu_inc()' instead.  Suddenly we
only need a single 'inc' instruction to increment the statistics.  This
is quite noticeable in the incredibly hot avc_has_perm_noaudit()
function (which triggers all the statistics by virtue of doing an
avc_lookup() call).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-19 18:59:47 -07:00
Linus Torvalds eb04f2f04e Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (78 commits)
  Revert "rcu: Decrease memory-barrier usage based on semi-formal proof"
  net,rcu: convert call_rcu(prl_entry_destroy_rcu) to kfree
  batman,rcu: convert call_rcu(softif_neigh_free_rcu) to kfree_rcu
  batman,rcu: convert call_rcu(neigh_node_free_rcu) to kfree()
  batman,rcu: convert call_rcu(gw_node_free_rcu) to kfree_rcu
  net,rcu: convert call_rcu(kfree_tid_tx) to kfree_rcu()
  net,rcu: convert call_rcu(xt_osf_finger_free_rcu) to kfree_rcu()
  net/mac80211,rcu: convert call_rcu(work_free_rcu) to kfree_rcu()
  net,rcu: convert call_rcu(wq_free_rcu) to kfree_rcu()
  net,rcu: convert call_rcu(phonet_device_rcu_free) to kfree_rcu()
  perf,rcu: convert call_rcu(swevent_hlist_release_rcu) to kfree_rcu()
  perf,rcu: convert call_rcu(free_ctx) to kfree_rcu()
  net,rcu: convert call_rcu(__nf_ct_ext_free_rcu) to kfree_rcu()
  net,rcu: convert call_rcu(net_generic_release) to kfree_rcu()
  net,rcu: convert call_rcu(netlbl_unlhsh_free_addr6) to kfree_rcu()
  net,rcu: convert call_rcu(netlbl_unlhsh_free_addr4) to kfree_rcu()
  security,rcu: convert call_rcu(sel_netif_free) to kfree_rcu()
  net,rcu: convert call_rcu(xps_dev_maps_release) to kfree_rcu()
  net,rcu: convert call_rcu(xps_map_release) to kfree_rcu()
  net,rcu: convert call_rcu(rps_map_release) to kfree_rcu()
  ...
2011-05-19 18:14:34 -07:00
James Morris ca7d120008 Merge branch 'for-linus' of git://git.infradead.org/users/eparis/selinux into for-linus 2011-05-13 09:52:16 +10:00
Eric Paris 93826c092c SELinux: delete debugging printks from filename_trans rule processing
The filename_trans rule processing has some printk(KERN_ERR ) messages
which were intended as debug aids in creating the code but weren't removed
before it was submitted.  Remove them.

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-05-12 16:02:42 -04:00
Greg Kroah-Hartman 7a627e3b9a SELINUX: add /sys/fs/selinux mount point to put selinuxfs
In the interest of keeping userspace from having to create new root
filesystems all the time, let's follow the lead of the other in-kernel
filesystems and provide a proper mount point for it in sysfs.

For selinuxfs, this mount point should be in /sys/fs/selinux/

Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Lennart Poettering <mzerqung@0pointer.de>
Cc: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[include kobject.h - Eric Paris]
[use selinuxfs_obj throughout - Eric Paris]
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-05-11 12:58:09 -04:00
Lai Jiangshan 690273fc70 security,rcu: convert call_rcu(sel_netif_free) to kfree_rcu()
The rcu callback sel_netif_free() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(sel_netif_free).

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-07 22:51:05 -07:00
James Morris 6f23928454 Merge branch 'for-linus' of git://git.infradead.org/users/eparis/selinux into for-linus 2011-05-04 11:59:34 +10:00
Eric Paris 5d30b10bd6 flex_array: flex_array_prealloc takes a number of elements, not an end
Change flex_array_prealloc to take the number of elements for which space
should be allocated instead of the last (inclusive) element. Users
and documentation are updated accordingly.  flex_arrays got introduced before
they had users.  When folks started using it, they ended up needing a
different API than was coded up originally.  This swaps over to the API that
folks apparently need.

Based-on-patch-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Tested-by: Chris Richards <gizmo@giz-works.com>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: stable@kernel.org [2.6.38+]
2011-04-28 16:12:47 -04:00
Eric Paris cb1e922fa1 SELinux: pass last path component in may_create
New inodes are created in a two stage process.  We first will compute the
label on a new inode in security_inode_create() and check if the
operation is allowed.  We will then actually re-compute that same label and
apply it in security_inode_init_security().  The change to do new label
calculations based in part on the last component of the path name only
passed the path component information all the way down the
security_inode_init_security hook.  Down the security_inode_create hook the
path information did not make it past may_create.  Thus the two calculations
came up differently and the permissions check might not actually be against
the label that is created.  Pass and use the same information in both places
to harmonize the calculations and checks.

Reported-by: Dominick Grift <domg472@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-28 16:12:41 -04:00
Eric Paris 2875fa0083 SELinux: introduce path_has_perm
We currently have inode_has_perm and dentry_has_perm.  dentry_has_perm just
calls inode_has_perm with additional audit data.  But dentry_has_perm can
take either a dentry or a path.  Split those to make the code obvious and
to fix the previous problem where I thought dentry_has_perm always had a
valid dentry and mnt.

Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-28 16:09:59 -04:00
Eric Paris 5a3ea8782c flex_array: flex_array_prealloc takes a number of elements, not an end
Change flex_array_prealloc to take the number of elements for which space
should be allocated instead of the last (inclusive) element. Users
and documentation are updated accordingly.  flex_arrays got introduced before
they had users.  When folks started using it, they ended up needing a
different API than was coded up originally.  This swaps over to the API that
folks apparently need.

Based-on-patch-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Tested-by: Chris Richards <gizmo@giz-works.com>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: stable@kernel.org [2.6.38+]
2011-04-28 15:56:06 -04:00
Eric Paris 562abf6241 SELinux: pass last path component in may_create
New inodes are created in a two stage process.  We first will compute the
label on a new inode in security_inode_create() and check if the
operation is allowed.  We will then actually re-compute that same label and
apply it in security_inode_init_security().  The change to do new label
calculations based in part on the last component of the path name only
passed the path component information all the way down the
security_inode_init_security hook.  Down the security_inode_create hook the
path information did not make it past may_create.  Thus the two calculations
came up differently and the permissions check might not actually be against
the label that is created.  Pass and use the same information in both places
to harmonize the calculations and checks.

Reported-by: Dominick Grift <domg472@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-28 15:15:54 -04:00
Eric Paris 2463c26d50 SELinux: put name based create rules in a hashtable
To shorten the list we need to run if filename trans rules exist for the type
of the given parent directory I put them in a hashtable.  Given the policy we
are expecting to use in Fedora this takes the worst case list run from about
5,000 entries to 17.

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
2011-04-28 15:15:53 -04:00
Eric Paris 3f058ef778 SELinux: generic hashtab entry counter
Instead of a hashtab entry counter function only useful for range
transition rules make a function generic for any hashtable to use.

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
2011-04-28 15:15:52 -04:00
Eric Paris be30b16d43 SELinux: calculate and print hashtab stats with a generic function
We have custom debug functions like rangetr_hash_eval and symtab_hash_eval
which do the same thing.  Just create a generic function that takes the name
of the hash table as an argument instead of having custom functions.

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
2011-04-28 15:15:52 -04:00
Eric Paris 03a4c0182a SELinux: skip filename trans rules if ttype does not match parent dir
Right now we walk to filename trans rule list for every inode that is
created.  First passes at policy using this facility creates around 5000
filename trans rules.  Running a list of 5000 entries every time is a bad
idea.  This patch adds a new ebitmap to policy which has a bit set for each
ttype that has at least 1 filename trans rule.  Thus when an inode is
created we can quickly determine if any rules exist for this parent
directory type and can skip the list if we know there is definitely no
relevant entry.

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
2011-04-28 15:15:52 -04:00
Eric Paris 2667991f60 SELinux: rename filename_compute_type argument to *type instead of *con
filename_compute_type() takes as arguments the numeric value of the type of
the subject and target.  It does not take a context.  Thus the names are
misleading.  Fix the argument names.

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
2011-04-28 15:15:51 -04:00
Eric Paris 4742600cf5 SELinux: fix comment to state filename_compute_type takes an objname not a qstr
filename_compute_type used to take a qstr, but it now takes just a name.
Fix the comments to indicate it is an objname, not a qstr.

Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-28 15:15:51 -04:00
Jiri Kosina 07f9479a40 Merge branch 'master' into for-next
Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.
2011-04-26 10:22:59 +02:00
Eric Paris 9ade0cf440 SELINUX: Make selinux cache VFS RCU walks safe
Now that the security modules can decide whether they support the
dcache RCU walk or not it's possible to make selinux a bit more
RCU friendly.  The SELinux AVC and security server access decision
code is RCU safe.  A specific piece of the LSM audit code may not
be RCU safe.

This patch makes the VFS RCU walk retry if it would hit the non RCU
safe chunk of code.  It will normally just work under RCU.  This is
done simply by passing the VFS RCU state as a flag down into the
avc_audit() code and returning ECHILD there if it would have an issue.

Based-on-patch-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-25 18:16:32 -07:00
Eric Paris a269434d2f LSM: separate LSM_AUDIT_DATA_DENTRY from LSM_AUDIT_DATA_PATH
This patch separates and audit message that only contains a dentry from
one that contains a full path.  This allows us to make it harder to
misuse the interfaces or for the interfaces to be implemented wrong.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
2011-04-25 18:14:07 -04:00
Eric Paris f48b739984 LSM: split LSM_AUDIT_DATA_FS into _PATH and _INODE
The lsm common audit code has wacky contortions making sure which pieces
of information are set based on if it was given a path, dentry, or
inode.  Split this into path and inode to get rid of some of the code
complexity.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
2011-04-25 18:13:15 -04:00
Eric Paris 0dc1ba24f7 SELINUX: Make selinux cache VFS RCU walks safe
Now that the security modules can decide whether they support the
dcache RCU walk or not it's possible to make selinux a bit more
RCU friendly.  The SELinux AVC and security server access decision
code is RCU safe.  A specific piece of the LSM audit code may not
be RCU safe.

This patch makes the VFS RCU walk retry if it would hit the non RCU
safe chunk of code.  It will normally just work under RCU.  This is
done simply by passing the VFS RCU state as a flag down into the
avc_audit() code and returning ECHILD there if it would have an issue.

Based-on-patch-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-25 16:24:41 -04:00
Andi Kleen 1c99042974 SECURITY: Move exec_permission RCU checks into security modules
Right now all RCU walks fall back to reference walk when CONFIG_SECURITY
is enabled, even though just the standard capability module is active.
This is because security_inode_exec_permission unconditionally fails
RCU walks.

Move this decision to the low level security module. This requires
passing the RCU flags down the security hook. This way at least
the capability module and a few easy cases in selinux/smack work
with RCU walks with CONFIG_SECURITY=y

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-25 10:20:32 -04:00
Eric Paris 6b697323a7 SELinux: security_read_policy should take a size_t not ssize_t
The len should be an size_t but is a ssize_t.  Easy enough fix to silence
build warnings.  We have no need for signed-ness.

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
2011-04-25 10:19:02 -04:00
Eric Paris a35c6c8368 SELinux: silence build warning when !CONFIG_BUG
If one builds a kernel without CONFIG_BUG there are a number of 'may be
used uninitialized' warnings.  Silence these by returning after the BUG().

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
2011-04-25 10:18:27 -04:00
Andi Kleen 8c9e80ed27 SECURITY: Move exec_permission RCU checks into security modules
Right now all RCU walks fall back to reference walk when CONFIG_SECURITY
is enabled, even though just the standard capability module is active.
This is because security_inode_exec_permission unconditionally fails
RCU walks.

Move this decision to the low level security module. This requires
passing the RCU flags down the security hook. This way at least
the capability module and a few easy cases in selinux/smack work
with RCU walks with CONFIG_SECURITY=y

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-22 16:17:29 -07:00
Eric Paris 425b473de5 SELinux: delete debugging printks from filename_trans rule processing
The filename_trans rule processing has some printk(KERN_ERR ) messages
which were intended as debug aids in creating the code but weren't removed
before it was submitted.  Remove them.

Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-20 11:45:14 -04:00
Justin P. Mattock 6eab04a876 treewide: remove extra semicolons
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-10 17:01:05 +02:00
Harry Ciao 1214eac73f Initialize policydb.process_class eariler.
Initialize policydb.process_class once all symtabs read from policy image,
so that it could be used to setup the role_trans.tclass field when a lower
version policy.X is loaded.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-07 12:00:26 -04:00
Stephen Smalley eba71de2cb selinux: Fix regression for Xorg
Commit 6f5317e730 introduced a bug in the
handling of userspace object classes that is causing breakage for Xorg
when XSELinux is enabled.  Fix the bug by changing map_class() to return
SECCLASS_NULL when the class cannot be mapped to a kernel object class.

Reported-by:  "Justin P. Mattock" <justinmattock@gmail.com>
Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2011-04-07 12:00:12 -04:00
Kohei Kaigai f50a3ec961 selinux: add type_transition with name extension support for selinuxfs
The attached patch allows /selinux/create takes optional 4th argument
to support TYPE_TRANSITION with name extension for userspace object
managers.
If 4th argument is not supplied, it shall perform as existing kernel.
In fact, the regression test of SE-PostgreSQL works well on the patched
kernel.

Thanks,

Signed-off-by: KaiGai Kohei <kohei.kaigai@eu.nec.com>
[manually verify fuzz was not an issue, and it wasn't: eparis]
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-01 17:13:23 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Stephen Smalley 85cd6da53a selinux: Fix regression for Xorg
Commit 6f5317e730 introduced a bug in the
handling of userspace object classes that is causing breakage for Xorg
when XSELinux is enabled.  Fix the bug by changing map_class() to return
SECCLASS_NULL when the class cannot be mapped to a kernel object class.

Reported-by:  "Justin P. Mattock" <justinmattock@gmail.com>
Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2011-03-29 10:26:30 +11:00
Harry Ciao c900ff323d SELinux: Write class field in role_trans_write.
If kernel policy version is >= 26, then write the class field of the
role_trans structure into the binary reprensentation.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-03-28 14:21:05 -04:00
Harry Ciao 63a312ca55 SELinux: Compute role in newcontext for all classes
Apply role_transition rules for all kinds of classes.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-03-28 14:21:01 -04:00
Harry Ciao 8023976cf4 SELinux: Add class support to the role_trans structure
If kernel policy version is >= 26, then the binary representation of
the role_trans structure supports specifying the class for the current
subject or the newly created object.

If kernel policy version is < 26, then the class field would be default
to the process class.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-03-28 14:20:58 -04:00
Serge E. Hallyn 2e14967075 userns: rename is_owner_or_cap to inode_owner_or_capable
And give it a kernel-doc comment.

[akpm@linux-foundation.org: btrfs changed in linux-next]
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:13 -07:00
Serge E. Hallyn 3486740a4f userns: security: make capabilities relative to the user namespace
- Introduce ns_capable to test for a capability in a non-default
  user namespace.
- Teach cap_capable to handle capabilities in a non-default
  user namespace.

The motivation is to get to the unprivileged creation of new
namespaces.  It looks like this gets us 90% of the way there, with
only potential uid confusion issues left.

I still need to handle getting all caps after creation but otherwise I
think I have a good starter patch that achieves all of your goals.

Changelog:
	11/05/2010: [serge] add apparmor
	12/14/2010: [serge] fix capabilities to created user namespaces
	Without this, if user serge creates a user_ns, he won't have
	capabilities to the user_ns he created.  THis is because we
	were first checking whether his effective caps had the caps
	he needed and returning -EPERM if not, and THEN checking whether
	he was the creator.  Reverse those checks.
	12/16/2010: [serge] security_real_capable needs ns argument in !security case
	01/11/2011: [serge] add task_ns_capable helper
	01/11/2011: [serge] add nsown_capable() helper per Bastian Blank suggestion
	02/16/2011: [serge] fix a logic bug: the root user is always creator of
		    init_user_ns, but should not always have capabilities to
		    it!  Fix the check in cap_capable().
	02/21/2011: Add the required user_ns parameter to security_capable,
		    fixing a compile failure.
	02/23/2011: Convert some macros to functions as per akpm comments.  Some
		    couldn't be converted because we can't easily forward-declare
		    them (they are inline if !SECURITY, extern if SECURITY).  Add
		    a current_user_ns function so we can use it in capability.h
		    without #including cred.h.  Move all forward declarations
		    together to the top of the #ifdef __KERNEL__ section, and use
		    kernel-doc format.
	02/23/2011: Per dhowells, clean up comment in cap_capable().
	02/23/2011: Per akpm, remove unreachable 'return -EPERM' in cap_capable.

(Original written and signed off by Eric;  latest, modified version
acked by him)

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: export current_user_ns() for ecryptfs]
[serge.hallyn@canonical.com: remove unneeded extra argument in selinux's task_has_capability]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:02 -07:00
Linus Torvalds 7a6362800c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
  bonding: enable netpoll without checking link status
  xfrm: Refcount destination entry on xfrm_lookup
  net: introduce rx_handler results and logic around that
  bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
  bonding: wrap slave state work
  net: get rid of multiple bond-related netdevice->priv_flags
  bonding: register slave pointer for rx_handler
  be2net: Bump up the version number
  be2net: Copyright notice change. Update to Emulex instead of ServerEngines
  e1000e: fix kconfig for crc32 dependency
  netfilter ebtables: fix xt_AUDIT to work with ebtables
  xen network backend driver
  bonding: Improve syslog message at device creation time
  bonding: Call netif_carrier_off after register_netdevice
  bonding: Incorrect TX queue offset
  net_sched: fix ip_tos2prio
  xfrm: fix __xfrm_route_forward()
  be2net: Fix UDP packet detected status in RX compl
  Phonet: fix aligned-mode pipe socket buffer header reserve
  netxen: support for GbE port settings
  ...

Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.
2011-03-16 16:29:25 -07:00
David S. Miller 1d28f42c1b net: Put flowi_* prefix on AF independent members of struct flowi
I intend to turn struct flowi into a union of AF specific flowi
structs.  There will be a common structure that each variant includes
first, much like struct sock_common.

This is the first step to move in that direction.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:44 -08:00
James Morris fe3fa43039 Merge branch 'master' of git://git.infradead.org/users/eparis/selinux into next 2011-03-08 11:38:10 +11:00
James Morris 1cc26bada9 Merge branch 'master'; commit 'v2.6.38-rc7' into next 2011-03-08 10:55:06 +11:00
Eric Paris 026eb167ae SELinux: implement the new sb_remount LSM hook
For SELinux we do not allow security information to change during a remount
operation.  Thus this hook simply strips the security module options from
the data and verifies that those are the same options as exist on the
current superblock.

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
2011-03-03 16:12:28 -05:00
Harry Ciao 2ad18bdf3b SELinux: Compute SID for the newly created socket
The security context for the newly created socket shares the same
user, role and MLS attribute as its creator but may have a different
type, which could be specified by a type_transition rule in the relevant
policy package.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
[fix call to security_transition_sid to include qstr, Eric Paris]
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
2011-03-03 15:19:44 -05:00
Harry Ciao 6f5317e730 SELinux: Socket retains creator role and MLS attribute
The socket SID would be computed on creation and no longer inherit
its creator's SID by default. Socket may have a different type but
needs to retain the creator's role and MLS attribute in order not
to break labeled networking and network access control.

The kernel value for a class would be used to determine if the class
if one of socket classes. If security_compute_sid is called from
userspace the policy value for a class would be mapped to the relevant
kernel value first.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
2011-03-03 15:19:43 -05:00
Harry Ciao 4bc6c2d5d8 SELinux: Auto-generate security_is_socket_class
The security_is_socket_class() is auto-generated by genheaders based
on classmap.h to reduce maintenance effort when a new class is defined
in SELinux kernel. The name for any socket class should be suffixed by
"socket" and doesn't contain more than one substr of "socket".

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
2011-03-03 15:19:43 -05:00
Patrick McHardy c53fa1ed92 netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms
Netlink message processing in the kernel is synchronous these days, the
session information can be collected when needed.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03 10:55:40 -08:00
Eric Paris 0b24dcb7f2 Revert "selinux: simplify ioctl checking"
This reverts commit 242631c49d.

Conflicts:

	security/selinux/hooks.c

SELinux used to recognize certain individual ioctls and check
permissions based on the knowledge of the individual ioctl.  In commit
242631c49d the SELinux code stopped trying to understand
individual ioctls and to instead looked at the ioctl access bits to
determine in we should check read or write for that operation.  This
same suggestion was made to SMACK (and I believe copied into TOMOYO).
But this suggestion is total rubbish.  The ioctl access bits are
actually the access requirements for the structure being passed into the
ioctl, and are completely unrelated to the operation of the ioctl or the
object the ioctl is being performed upon.

Take FS_IOC_FIEMAP as an example.  FS_IOC_FIEMAP is defined as:

FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap)

So it has access bits R and W.  What this really means is that the
kernel is going to both read and write to the struct fiemap.  It has
nothing at all to do with the operations that this ioctl might perform
on the file itself!

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
2011-02-25 15:40:00 -05:00
Eric Paris 47ac19ea42 selinux: drop unused packet flow permissions
These permissions are not used and can be dropped in the kernel
definitions.

Suggested-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
2011-02-25 15:40:00 -05:00
Steffen Klassert 4a7ab3dcad selinux: Fix packet forwarding checks on postrouting
The IPSKB_FORWARDED and IP6SKB_FORWARDED flags are used only in the
multicast forwarding case to indicate that a packet looped back after
forward. So these flags are not a good indicator for packet forwarding.
A better indicator is the incoming interface. If we have no socket context,
but an incoming interface and we see the packet in the ip postroute hook,
the packet is going to be forwarded.

With this patch we use the incoming interface as an indicator on packet
forwarding.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-02-25 15:00:51 -05:00
Steffen Klassert b9679a7618 selinux: Fix wrong checks for selinux_policycap_netpeer
selinux_sock_rcv_skb_compat and selinux_ip_postroute_compat are just
called if selinux_policycap_netpeer is not set. However in these
functions we check if selinux_policycap_netpeer is set. This leads
to some dead code and to the fact that selinux_xfrm_postroute_last
is never executed. This patch removes the dead code and the checks
for selinux_policycap_netpeer in the compatibility functions.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-02-25 15:00:47 -05:00
Steffen Klassert 8f82a6880d selinux: Fix check for xfrm selinux context algorithm
selinux_xfrm_sec_ctx_alloc accidentally checks the xfrm domain of
interpretation against the selinux context algorithm. This patch
fixes this by checking ctx_alg against the selinux context algorithm.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-02-25 15:00:44 -05:00
David S. Miller e33f770426 xfrm: Mark flowi arg to security_xfrm_state_pol_flow_match() const.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:13:15 -08:00
Tetsuo Handa 2edeaa34a6 CRED: Fix BUG() upon security_cred_alloc_blank() failure
In cred_alloc_blank() since 2.6.32, abort_creds(new) is called with
new->security == NULL and new->magic == 0 when security_cred_alloc_blank()
returns an error.  As a result, BUG() will be triggered if SELinux is enabled
or CONFIG_DEBUG_CREDENTIALS=y.

If CONFIG_DEBUG_CREDENTIALS=y, BUG() is called from __invalid_creds() because
cred->magic == 0.  Failing that, BUG() is called from selinux_cred_free()
because selinux_cred_free() is not expecting cred->security == NULL.  This does
not affect smack_cred_free(), tomoyo_cred_free() or apparmor_cred_free().

Fix these bugs by

(1) Set new->magic before calling security_cred_alloc_blank().

(2) Handle null cred->security in creds_are_invalid() and selinux_cred_free().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-07 14:04:00 -08:00
Lucian Adrian Grijincu 8e6c96935f security/selinux: fix /proc/sys/ labeling
This fixes an old (2007) selinux regression: filesystem labeling for
/proc/sys returned
     -r--r--r-- unknown                          /proc/sys/fs/file-nr
instead of
     -r--r--r-- system_u:object_r:sysctl_fs_t:s0 /proc/sys/fs/file-nr

Events that lead to breaking of /proc/sys/ selinux labeling:

1) sysctl was reimplemented to route all calls through /proc/sys/

    commit 77b14db502
    [PATCH] sysctl: reimplement the sysctl proc support

2) proc_dir_entry was removed from ctl_table:

    commit 3fbfa98112
    [PATCH] sysctl: remove the proc_dir_entry member for the sysctl tables

3) selinux still walked the proc_dir_entry tree to apply
   labeling. Because ctl_tables don't have a proc_dir_entry, we did
   not label /proc/sys/ inodes any more. To achieve this the /proc/sys/
   inodes were marked private and private inodes were ignored by
   selinux.

    commit bbaca6c2e7
    [PATCH] selinux: enhance selinux to always ignore private inodes

    commit 86a71dbd3e
    [PATCH] sysctl: hide the sysctl proc inodes from selinux

Access control checks have been done by means of a special sysctl hook
that was called for read/write accesses to any /proc/sys/ entry.

We don't have to do this because, instead of walking the
proc_dir_entry tree we can walk the dentry tree (as done in this
patch). With this patch:
* we don't mark /proc/sys/ inodes as private
* we don't need the sysclt security hook
* we walk the dentry tree to find the path to the inode.

We have to strip the PID in /proc/PID/ entries that have a
proc_dir_entry because selinux does not know how to label paths like
'/1/net/rpc/nfsd.fh' (and defaults to 'proc_t' labeling). Selinux does
know of '/net/rpc/nfsd.fh' (and applies the 'sysctl_rpc_t' label).

PID stripping from the path was done implicitly in the previous code
because the proc_dir_entry tree had the root in '/net' in the example
from above. The dentry tree has the root in '/1'.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-02-01 11:53:54 -05:00
Eric Paris 652bb9b0d6 SELinux: Use dentry name in new object labeling
Currently SELinux has rules which label new objects according to 3 criteria.
The label of the process creating the object, the label of the parent
directory, and the type of object (reg, dir, char, block, etc.)  This patch
adds a 4th criteria, the dentry name, thus we can distinguish between
creating a file in an etc_t directory called shadow and one called motd.

There is no file globbing, regex parsing, or anything mystical.  Either the
policy exactly (strcmp) matches the dentry name of the object or it doesn't.
This patch has no changes from today if policy does not implement the new
rules.

Signed-off-by: Eric Paris <eparis@redhat.com>
2011-02-01 11:12:30 -05:00
Eric Paris 2a7dba391e fs/vfs/security: pass last path component to LSM on inode creation
SELinux would like to implement a new labeling behavior of newly created
inodes.  We currently label new inodes based on the parent and the creating
process.  This new behavior would also take into account the name of the
new object when deciding the new label.  This is not the (supposed) full path,
just the last component of the path.

This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations.  We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly.  This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook.  If no such name
exists it is fine to pass NULL.

Signed-off-by: Eric Paris <eparis@redhat.com>
2011-02-01 11:12:29 -05:00
Davidlohr Bueso 3ac285ff23 selinux: return -ENOMEM when memory allocation fails
Return -ENOMEM when memory allocation fails in cond_init_bool_indexes,
correctly propagating error code to caller.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24 11:35:47 +11:00
Shan Wei ced3b93018 security:selinux: kill unused MAX_AVTAB_HASH_MASK and ebitmap_startbit
Kill unused MAX_AVTAB_HASH_MASK and ebitmap_startbit.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-01-24 10:36:11 +11:00
Linus Torvalds e0e736fc0d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (30 commits)
  MAINTAINERS: Add tomoyo-dev-en ML.
  SELinux: define permissions for DCB netlink messages
  encrypted-keys: style and other cleanup
  encrypted-keys: verify datablob size before converting to binary
  trusted-keys: kzalloc and other cleanup
  trusted-keys: additional TSS return code and other error handling
  syslog: check cap_syslog when dmesg_restrict
  Smack: Transmute labels on specified directories
  selinux: cache sidtab_context_to_sid results
  SELinux: do not compute transition labels on mountpoint labeled filesystems
  This patch adds a new security attribute to Smack called SMACK64EXEC. It defines label that is used while task is running.
  SELinux: merge policydb_index_classes and policydb_index_others
  selinux: convert part of the sym_val_to_name array to use flex_array
  selinux: convert type_val_to_struct to flex_array
  flex_array: fix flex_array_put_ptr macro to be valid C
  SELinux: do not set automatic i_ino in selinuxfs
  selinux: rework security_netlbl_secattr_to_sid
  SELinux: standardize return code handling in selinuxfs.c
  SELinux: standardize return code handling in selinuxfs.c
  SELinux: standardize return code handling in policydb.c
  ...
2011-01-10 11:18:59 -08:00
Alexey Dobriyan 37721e1b0c headers: path.h redux
Remove path.h from sched.h and other files.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10 08:51:44 -08:00
James Morris aeda4ac3ef Merge branch 'master' of git://git.infradead.org/users/eparis/selinux into next 2011-01-10 10:40:42 +11:00
James Morris d2e7ad1922 Merge branch 'master' into next
Conflicts:
	security/smack/smack_lsm.c

Verified and added fix by Stephen Rothwell <sfr@canb.auug.org.au>
Ok'd by Casey Schaufler <casey@schaufler-ca.com>

Signed-off-by: James Morris <jmorris@namei.org>
2011-01-10 09:46:24 +11:00
Linus Torvalds b4a45f5fe8 Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin
* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits)
  fs: scale mntget/mntput
  fs: rename vfsmount counter helpers
  fs: implement faster dentry memcmp
  fs: prefetch inode data in dcache lookup
  fs: improve scalability of pseudo filesystems
  fs: dcache per-inode inode alias locking
  fs: dcache per-bucket dcache hash locking
  bit_spinlock: add required includes
  kernel: add bl_list
  xfs: provide simple rcu-walk ACL implementation
  btrfs: provide simple rcu-walk ACL implementation
  ext2,3,4: provide simple rcu-walk ACL implementation
  fs: provide simple rcu-walk generic_check_acl implementation
  fs: provide rcu-walk aware permission i_ops
  fs: rcu-walk aware d_revalidate method
  fs: cache optimise dentry and inode for rcu-walk
  fs: dcache reduce branches in lookup path
  fs: dcache remove d_mounted
  fs: fs_struct use seqlock
  fs: rcu-walk for path lookup
  ...
2011-01-07 08:56:33 -08:00
Nick Piggin dc0474be3e fs: dcache rationalise dget variants
dget_locked was a shortcut to avoid the lazy lru manipulation when we already
held dcache_lock (lru manipulation was relatively cheap at that point).
However, how that the lru lock is an innermost one, we never hold it at any
caller, so the lock cost can now be avoided. We already have well working lazy
dcache LRU, so it should be fine to defer LRU manipulations to scan time.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:24 +11:00
Nick Piggin b5c84bf6f6 fs: dcache remove dcache_lock
dcache_lock no longer protects anything. remove it.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:23 +11:00
Nick Piggin 2fd6b7f507 fs: dcache scale subdirs
Protect d_subdirs and d_child with d_lock, except in filesystems that aren't
using dcache_lock for these anyway (eg. using i_mutex).

Note: if we change the locking rule in future so that ->d_child protection is
provided only with ->d_parent->d_lock, it may allow us to reduce some locking.
But it would be an exception to an otherwise regular locking scheme, so we'd
have to see some good results. Probably not worthwhile.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:21 +11:00
David S. Miller 3610cda53f af_unix: Avoid socket->sk NULL OOPS in stream connect security hooks.
unix_release() can asynchornously set socket->sk to NULL, and
it does so without holding the unix_state_lock() on "other"
during stream connects.

However, the reverse mapping, sk->sk_socket, is only transitioned
to NULL under the unix_state_lock().

Therefore make the security hooks follow the reverse mapping instead
of the forward mapping.

Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-05 15:38:53 -08:00
David S. Miller 17f7f4d9fc Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/ipv4/fib_frontend.c
2010-12-26 22:37:05 -08:00
Eric Paris 350e4f31e0 SELinux: define permissions for DCB netlink messages
Commit 2f90b865 added two new netlink message types to the netlink route
socket.  SELinux has hooks to define if netlink messages are allowed to
be sent or received, but it did not know about these two new message
types.  By default we allow such actions so noone likely noticed.  This
patch adds the proper definitions and thus proper permissions
enforcement.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-12-16 12:50:17 -05:00
Eric Paris 73ff5fc0a8 selinux: cache sidtab_context_to_sid results
sidtab_context_to_sid takes up a large share of time when creating large
numbers of new inodes (~30-40% in oprofile runs).  This patch implements a
cache of 3 entries which is checked before we do a full context_to_sid lookup.
On one system this showed over a x3 improvement in the number of inodes that
could be created per second and around a 20% improvement on another system.

Any time we look up the same context string sucessivly (imagine ls -lZ) we
should hit this cache hot.  A cache miss should have a relatively minor affect
on performance next to doing the full table search.

All operations on the cache are done COMPLETELY lockless.  We know that all
struct sidtab_node objects created will never be deleted until a new policy is
loaded thus we never have to worry about a pointer being dereferenced.  Since
we also know that pointer assignment is atomic we know that the cache will
always have valid pointers.  Given this information we implement a FIFO cache
in an array of 3 pointers.  Every result (whether a cache hit or table lookup)
will be places in the 0 spot of the cache and the rest of the entries moved
down one spot.  The 3rd entry will be lost.

Races are possible and are even likely to happen.  Lets assume that 4 tasks
are hitting sidtab_context_to_sid.  The first task checks against the first
entry in the cache and it is a miss.  Now lets assume a second task updates
the cache with a new entry.  This will push the first entry back to the second
spot.  Now the first task might check against the second entry (which it
already checked) and will miss again.  Now say some third task updates the
cache and push the second entry to the third spot.  The first task my check
the third entry (for the third time!) and again have a miss.  At which point
it will just do a full table lookup.  No big deal!

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-12-07 16:44:01 -05:00
Eric Paris 415103f993 SELinux: do not compute transition labels on mountpoint labeled filesystems
selinux_inode_init_security computes transitions sids even for filesystems
that use mount point labeling.  It shouldn't do that.  It should just use
the mount point label always and no matter what.

This causes 2 problems.  1) it makes file creation slower than it needs to be
since we calculate the transition sid and 2) it allows files to be created
with a different label than the mount point!

# id -Z
staff_u:sysadm_r:sysadm_t:s0-s0:c0.c1023
# sesearch --type --class file --source sysadm_t --target tmp_t
Found 1 semantic te rules:
   type_transition sysadm_t tmp_t : file user_tmp_t;

# mount -o loop,context="system_u:object_r:tmp_t:s0"  /tmp/fs /mnt/tmp

# ls -lZ /mnt/tmp
drwx------. root root system_u:object_r:tmp_t:s0       lost+found
# touch /mnt/tmp/file1
# ls -lZ /mnt/tmp
-rw-r--r--. root root staff_u:object_r:user_tmp_t:s0   file1
drwx------. root root system_u:object_r:tmp_t:s0       lost+found

Whoops, we have a mount point labeled filesystem tmp_t with a user_tmp_t
labeled file!

Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Reviewed-by: James Morris <jmorris@namei.org>
2010-12-02 16:14:51 -05:00
Eric Paris 1d9bc6dc5b SELinux: merge policydb_index_classes and policydb_index_others
We duplicate functionality in policydb_index_classes() and
policydb_index_others().  This patch merges those functions just to make it
clear there is nothing special happening here.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-11-30 17:28:58 -05:00
Eric Paris ac76c05bec selinux: convert part of the sym_val_to_name array to use flex_array
The sym_val_to_name type array can be quite large as it grows linearly with
the number of types.  With known policies having over 5k types these
allocations are growing large enough that they are likely to fail.  Convert
those to flex_array so no allocation is larger than PAGE_SIZE

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-11-30 17:28:58 -05:00
Eric Paris 23bdecb000 selinux: convert type_val_to_struct to flex_array
In rawhide type_val_to_struct will allocate 26848 bytes, an order 3
allocations.  While this hasn't been seen to fail it isn't outside the
realm of possibiliy on systems with severe memory fragmentation.  Convert
to flex_array so no allocation will ever be bigger than PAGE_SIZE.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-11-30 17:28:57 -05:00
Eric Paris c9e86a9b95 SELinux: do not set automatic i_ino in selinuxfs
selinuxfs carefully uses i_ino to figure out what the inode refers to.  The
VFS used to generically set this value and we would reset it to something
useable.  After 85fe4025c6 each filesystem sets this value to a default
if needed.  Since selinuxfs doesn't use the default value and it can only
lead to problems (I'd rather have 2 inodes with i_ino == 0 than one
pointing to the wrong data) lets just stop setting a default.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
2010-11-30 17:28:57 -05:00
Eric Paris 7ae9f23cbd selinux: rework security_netlbl_secattr_to_sid
security_netlbl_secattr_to_sid is difficult to follow, especially the
return codes.  Try to make the function obvious.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-11-30 17:28:57 -05:00
Eric Paris 4b02b52448 SELinux: standardize return code handling in selinuxfs.c
selinuxfs.c has lots of different standards on how to handle return paths on
error.  For the most part transition to

	rc=errno
	if (failure)
		goto out;
[...]
out:
	cleanup()
	return rc;

Instead of doing cleanup mid function, or having multiple returns or other
options.  This doesn't do that for every function, but most of the complex
functions which have cleanup routines on error.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-11-30 17:28:57 -05:00
Eric Paris b77a493b1d SELinux: standardize return code handling in selinuxfs.c
selinuxfs.c has lots of different standards on how to handle return paths on
error.  For the most part transition to

	rc=errno
	if (failure)
		goto out;
[...]
out:
	cleanup()
	return rc;

Instead of doing cleanup mid function, or having multiple returns or other
options.  This doesn't do that for every function, but most of the complex
functions which have cleanup routines on error.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-11-30 17:28:57 -05:00
Eric Paris 9398c7f794 SELinux: standardize return code handling in policydb.c
policydb.c has lots of different standards on how to handle return paths on
error.  For the most part transition to

	rc=errno
	if (failure)
		goto out;
[...]
out:
	cleanup()
	return rc;

Instead of doing cleanup mid function, or having multiple returns or other
options.  This doesn't do that for every function, but most of the complex
functions which have cleanup routines on error.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-11-30 17:28:56 -05:00
Serge E. Hallyn ce6ada35bd security: Define CAP_SYSLOG
Privileged syslog operations currently require CAP_SYS_ADMIN.  Split
this off into a new CAP_SYSLOG privilege which we can sanely take away
from a container through the capability bounding set.

With this patch, an lxc container can be prevented from messing with
the host's syslog (i.e. dmesg -c).

Changelog: mar 12 2010: add selinux capability2:cap_syslog perm
Changelog: nov 22 2010:
	. port to new kernel
	. add a WARN_ONCE if userspace isn't using CAP_SYSLOG

Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Acked-By: Kees Cook <kees.cook@canonical.com>
Cc: James Morris <jmorris@namei.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: "Christopher J. PeBenito" <cpebenito@tresys.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: James Morris <jmorris@namei.org>
2010-11-29 08:35:12 +11:00
Eric Paris 2fe66ec242 SELinux: indicate fatal error in compat netfilter code
The SELinux ip postroute code indicates when policy rejected a packet and
passes the error back up the stack.  The compat code does not.  This patch
sends the same kind of error back up the stack in the compat code.

Based-on-patch-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-23 10:50:17 -08:00
Eric Paris 04f6d70f6e SELinux: Only return netlink error when we know the return is fatal
Some of the SELinux netlink code returns a fatal error when the error might
actually be transient.  This patch just silently drops packets on
potentially transient errors but continues to return a permanant error
indicator when the denial was because of policy.

Based-on-comments-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-23 10:50:17 -08:00
Eric Paris 1f1aaf8282 SELinux: return -ECONNREFUSED from ip_postroute to signal fatal error
The SELinux netfilter hooks just return NF_DROP if they drop a packet.  We
want to signal that a drop in this hook is a permanant fatal error and is not
transient.  If we do this the error will be passed back up the stack in some
places and applications will get a faster interaction that something went
wrong.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 10:54:35 -08:00
Eric Paris 12b3052c3e capabilities/syslog: open code cap_syslog logic to fix build failure
The addition of CONFIG_SECURITY_DMESG_RESTRICT resulted in a build
failure when CONFIG_PRINTK=n.  This is because the capabilities code
which used the new option was built even though the variable in question
didn't exist.

The patch here fixes this by moving the capabilities checks out of the
LSM and into the caller.  All (known) LSMs should have been calling the
capabilities hook already so it actually makes the code organization
better to eliminate the hook altogether.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-15 15:40:01 -08:00
Al Viro fc14f2fef6 convert get_sb_single() users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:28 -04:00
Christoph Hellwig 85fe4025c6 fs: do not assign default i_ino in new_inode
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves.  For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:11 -04:00
Stephen Rothwell f0d3d9894e selinux: include vmalloc.h for vmalloc_user
Include vmalloc.h for vmalloc_user (fixes ppc build warning).
Acked-by: Eric Paris <eparis@redhat.com>

Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:13:01 +11:00
Eric Paris 845ca30fe9 selinux: implement mmap on /selinux/policy
/selinux/policy allows a user to copy the policy back out of the kernel.
This patch allows userspace to actually mmap that file and use it directly.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:12:59 +11:00
Eric Paris cee74f47a6 SELinux: allow userspace to read policy back out of the kernel
There is interest in being able to see what the actual policy is that was
loaded into the kernel.  The patch creates a new selinuxfs file
/selinux/policy which can be read by userspace.  The actual policy that is
loaded into the kernel will be written back out to userspace.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:12:58 +11:00
Eric Paris 00d85c83ac SELinux: drop useless (and incorrect) AVTAB_MAX_SIZE
AVTAB_MAX_SIZE was a define which was supposed to be used in userspace to
define a maximally sized avtab when userspace wasn't sure how big of a table
it needed.  It doesn't make sense in the kernel since we always know our table
sizes.  The only place it is used we have a more appropiately named define
called AVTAB_MAX_HASH_BUCKETS, use that instead.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:12:57 +11:00