Commit Graph

531 Commits

Author SHA1 Message Date
Fabio Estevam c6e7695de8 ARM: imx: Add VPR200 and MX51_3DS entries to uncompress.h
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Marc Reilly <marc@cpdesign.com.au>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-24 09:02:02 +01:00
Linus Torvalds 16c1020362 Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits)
  ARM: pxa: fix building issue of missing physmap.h
  ARM: mmp: PXA910 drive strength FAST using wrong value
  ARM: mmp: MMP2 drive strength FAST using wrong value
  ARM: pxa: fix recursive calls in pxa_low_gpio_chip
  AT91: Support for gsia18s board
  AT91: Acme Systems FOX Board G20 board files
  AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h
  ARM: pxa: fix suspend/resume array index miscalculation
  ARM: pxa: use cpu_has_ipr() consistently in irq.c
  ARM: pxa: remove unused variable in clock-pxa3xx.c
  ARM: pxa: fix warning in zeus.c
  ARM: sa1111: fix typo in sa1111_retrigger_lowirq()
  ARM mxs: clkdev related compile fixes
  ARM i.MX mx31_3ds: Fix MC13783 regulator names
  ARM: plat-stmp3xxx: irq_data conversion.
  ARM: plat-spear: irq_data conversion.
  ARM: plat-orion: irq_data conversion.
  ARM: plat-omap: irq_data conversion.
  ARM: plat-nomadik: irq_data conversion.
  ARM: plat-mxc: irq_data conversion.
  ...

Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert
Buytenhek's irq_data conversion clashing with some omap irq updates)
2011-01-15 12:33:40 -08:00
Russell King 0a831cec1b Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2011-01-14 12:12:42 +00:00
Linus Torvalds 008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Lennert Buytenhek 4d93579f63 ARM: plat-mxc: irq_data conversion.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2011-01-13 17:19:09 +01:00
Arnaud Patard (Rtp) dd027b00eb mx51: add support for pwm
This patch is adding support for pwm1 and pwm2 devices found
on mx51.
[ this patch has been tested with pwm-backlight driver ]

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 14:03:58 +01:00
Yong Shen 467ae1e47f ARM: i.MX53: add IOMUX pad for ecspi
Add IOMUX pad entry for ecspi

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 10:02:18 +01:00
Fabio Estevam a5fcfef0b8 ARM: mx5: dynamically allocate imx-keypad devices
Add support for dynamical allocation of imx-keypad on mx5 platform.

After moving to dynamically registration of the keypad, the keypad clock
name needs to change accordingly.

The reason is that the original mx5 keypad platform_device id was 0,
now we use id=-1 as per arch/arm/plat-mxc/devices/platform-imx-keypad.c.

Tested keypad successfully on a MX51_3DS board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12 14:50:45 +01:00
Fabio Estevam 076762aa52 ARM: mx5: dynamically allocate pwm devices
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12 14:50:09 +01:00
Yong Shen b0a6ba5ffb ARM i.MX53 enable spi on EVK board
1. some macro definitions fix
2. add platform data for spi device
3. register spi clocks

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-11 10:07:14 +01:00
Yong Shen 410d3458e5 ARM i.MX53 enable sdhc support on EVK board
1. changes some register address to fit macro definition
2. add platform data and clock for sdhc

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07 15:20:53 +01:00
Yong Shen 0d7671ee66 ARM i.MX53 enable i2c on EVK board
add i2c platform data and clock

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07 15:20:53 +01:00
Yong Shen 639047677b ARM i.MX53: enable fec driver on EVK board
1. Adjust FEC base address name to fit macro definition
2. Add platform data and reset function for FEC

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07 15:20:53 +01:00
Richard Zhao 14c6500e75 arm: mxc: move IOMUX_CONFIG_SION definition to iomux-v3.h
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-07 15:20:52 +01:00
Russell King 404a02cbd2 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h
2011-01-06 22:33:32 +00:00
Yong Shen a58154d1c3 ARM i.MX53: Make MX53 EVK bootable
1. Add entries to Kconfig
2. Add machine definition
3. Add Uart platform data, pad setting and base address
4. Adjust GPIO irq number

Signed-off-by: Yong Shen <yong.shen@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-04 12:00:23 +01:00
Sascha Hauer 96de6d447f ARM i.MX51: rename IPU irqs
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 16:31:03 +01:00
Arnaud Patard (Rtp) 8305ed75d1 MX51: Add support for usb host 2
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 10:20:23 +01:00
Arnaud Patard (Rtp) 08406f540c arch/arm/plat-mxc/ehci.c: fix errors/typos
This patch is fixing some issues :

- MXC_OTG_UCTRL_OPM_BIT is for USBCTRL register and not PHYCTRL register.
- the MXC_EHCI_WAKEUP_ENABLED check was only clearing the bits so never allows
  to set them.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 10:19:48 +01:00
Richard Zhao d3d4b60b12 arm: mx50: add mx50 reference design board support
Add basic function and uart device support.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 09:39:30 +01:00
Richard Zhao 3d5a44be30 arm: mx50: add core functions support except clock
Add core definitions and memory map, gpio, irq, iomux, uart device
support.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 09:39:29 +01:00
Richard Zhao 02226a20bc arm: mx5: mx51/53 have different mxc_cpu_type definition
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 09:38:28 +01:00
Richard Zhao dca3abf8d0 arm: mx51: define mx51's own MXC_GPIO_IRQS
mx5 SoCs have different GPIO port count.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 09:38:27 +01:00
Richard Zhao b086e97b20 arm: plat-mxc: add full parameter macro to define gpio port
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 09:38:27 +01:00
Russell King 509e1f0fd7 ARM: mxc: update clock source registration
In d7e81c2 (clocksource: Add clocksource_register_hz/khz interface) new
interfaces were added which simplify (and optimize) the selection of the
divisor shift/mult constants.  Switch over to using this new interface.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 22:44:39 +00:00
Jiri Kosina 4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Sascha Hauer ee1ae4d7b1 ARM i.MX51: Full iomux support
This iomux file has been constructed from the Freescale pinmux tool.
It contains all pins from the tool, but the datasheet lists some
configurations not present in the tool, these are not yet added.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-15 14:42:23 +01:00
Lothar Waßmann 96f3e25684 MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie (step 2)
This patch actually replaces the 'struct pad_desc' with a u64 cookie
to facilitate adding platform specific pad_ctrl settings to an
existing pad definition.

So, instead of:
	iomux_v3_cfg_t power_key = MX51_PAD_EIM_A27__GPIO_2_21;
	power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2;
	mxc_iomux_v3_setup_pad(&power_key);
one can write:
	mxc_iomux_v3_setup_pad((MX51_PAD_EIM_A27__GPIO_2_21 & ~MUX_PAD_CTRL_MASK) | MX51_GPIO_PAD_CTRL_2);

Patch applies to branch 'imx-for-2.6.38' of git://git.pengutronix.de/git/imx/linux-2.6

Signed-Off-By: Lothar Waßmann <LW@KARO-electronics.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-15 12:42:49 +01:00
Fabio Estevam 28a4f908ac ARM: mx5: check for error in ioremap
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14 09:55:53 +01:00
Arnaud Patard (Rtp) bb477de2ef Fix imx cpufreq driver as module
When building as module:
ERROR: "cpufreq_gov_performance" [arch/arm/plat-mxc/cpufreq.ko] undefined!
WARNING: modpost: Found 1 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2

It's due to the driver using CPUFREQ_DEFAULT_GOVERNOR, even it should not
(see commit 8122c6cea0 in Linus tree), so
remove it.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14 09:54:38 +01:00
Peter Horton cdc3f10630 mx51: support FIQ on TZIC, revised
Add support for FIQ on mx51 TZIC

TZIC changes tested with FIQ audio on an mx51 board

AVIC changes build with mx3_defconfig, not tested

Signed-off-by: Peter Horton <phorton@bitbox.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14 09:54:37 +01:00
Peter Horton f25972233f mx51: add SSI3
Add SSI3 to MX51

Signed-off-by: Peter Horton <phorton@bitbox.co.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14 09:54:35 +01:00
Fabio Estevam 2c1f4672f0 watchdog: imx: use clk_get to acquire the watchdog clock
Use clk_get to acquire the watchdog clock and also avoid hardcoding the clock name.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14 09:54:19 +01:00
Fabio Estevam 8c2efec3cd ARM: mx5: add support for the two watchdog modules
MX51 has two watchdog modules.

Add support for both of them.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-07 20:03:11 +01:00
Sascha Hauer 0e44e05958 Merge commit 'v2.6.37-rc4' into imx-for-2.6.38
Done to resolve merge conflict:

Conflicts:
	arch/arm/mach-mx25/devices-imx25.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-06 09:36:17 +01:00
Arnaud Patard (Rtp) 96886c4361 iMX51: introduce IMX_GPIO_NR
Currently, to define a GPIO number, we're using something like :

#define EFIKAMX_PCBID0         (2*32 + 16)

to define GPIO 3 16.

This is not really readable and it's error prone imho (note the 3 vs 2).
So, I'm introducing a new macro to define this in a better way. Now, the
code sample become :

#define EFIKAMX_PCBID0         IMX_GPIO_NR(3, 16)

v2:
- move to gpio.h
- add parens & spaces
- switch to IMX_GPIO_NR instead of MX51_GPIO_NR

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-03 11:05:16 +01:00
Fabio Estevam b99545cb59 ARM: mx5: dynamically allocate imx2-wdt devices
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-03 11:05:15 +01:00
Fabio Estevam d94ed1287e ARM: mx5: introduce SOC_IMX51
Introduce SOC_IMX51 to keep consistency with the other i.MX devices

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-03 11:05:13 +01:00
Uwe Kleine-König 4c6c32b3f8 ARM: mx25: fix offset for usb host controller
In commit 2c20b9f (ARM: mx25: dynamically allocate mxc-ehci devices) I
changed the offset to the value specified in the reference manual
intending to test this change on hardware.  This slipped through and now
prooved to be wrong.  So fix it and add a comment about the
documentation being wrong.

Reported-by: Jaume Ribot <jaume@fqingenieria.es>
Cc: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Cc: Shawn Guo <shawn.gsc@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-03 11:05:10 +01:00
Eric Bénard 29bb6afcb0 plat-mxc/ehci.c: fix compile breakage
commits 2eb42d5c28 and
9e1dde3387 renamed some defines
but didn't fix all the places where these defines are used
leading to a compile failure for USB on i.MX31, 35 and 27.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-03 11:05:09 +01:00
Sascha Hauer 4e5cf41eeb ARM i.MX SDMA: Add ROM script addresses to platform_data
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-03 11:05:08 +01:00
Sascha Hauer 5b28aa319b dmaengine i.MX SDMA: Allow to run without firmware
The SDMA firmware consists of a ROM part and a RAM part.
The ROM part is always present in the SDMA engine and
is sufficient for many cases.
This patch allows to pass in platform data containing
the script addresses in ROM, so loading a firmware is
optional now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
2010-12-03 11:04:54 +01:00
Dinh Nguyen 9ab4650f71 ARM: imx: Get the silicon version from the IIM module
Instead of reading the silicon version from ROM, we should
read the SREV register from the IIM.

Freescale has dropped all support for MX51 REV1.0, only MX51
REV 2.0 and 3.0 are valid.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-28 19:51:47 +01:00
Dinh Nguyen c0abefd30b ARM: imx: Add core definitions for MX53
Add iomux, clocks,  and memory map for Freescale's MX53 SoC.
Add cpu_is_mx53 function to common.h.
Add 3 more banks of gpio's to mxc_gpio_ports.
Add MX53 phys offset address.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24 10:09:04 +01:00
Sascha Hauer ec4bb253fc ARM i.MX51: Make CONFIG_MXC_TZIC an invisible option
There's no point showing this option to the user. The correct
value will be selected anyway.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24 10:08:59 +01:00
Sascha Hauer c7259df3af ARM i.MX irq: Compile avic irq code only on SoCs that need it
This patch adds a Kconfig option for the avic irq controller
and lets the SoCs that need it select this option.
Also, as we have two irq controllers for i.MX, irq.c is not
appropriate anymore, so rename it to avic.c

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24 10:08:58 +01:00
Arnaud Patard (Rtp) 28d6a7a2f3 imx: fix iomux v3
Commit "ARM: i.MX IOMUX-V3 replace struct pad_desc with bitmapped cookie"
(b705cb4d42e95a4a43a8945571c8613e71526c3d) introduced a typo which was
preventing my efikamx to boot. This patch is fixing that.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24 09:57:17 +01:00
Arnaud Patard (Rtp) c2932bf470 efikamx: add reset
The efikamx board is using a gpio to reset the board so add support
for it

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24 09:57:16 +01:00
Arnaud Patard (Rtp) 0dea1c7464 imx51: fix gpio_4_24 and gpio_4_25 pad configuration
s/NO_PAD_CTRL/MX51_GPIO_PAD_CTRL/

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24 09:57:13 +01:00
Arnaud Patard (Rtp) 82df68ad26 imx51: add gpio mode for csi1 {h,v}sync
Add definitions for configuring CSI1_{H,V}SYNC as GPIO

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24 09:57:10 +01:00